| Electronic Components Datasheet Search |
|
6657 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 1546657-5 | TE Connectivity | Connector: PCB terminal block; power supply; 10A; 300V; PIN: 5 RoHS : Compliant |
| 2,800 | |
| 3036657 | Phoenix Contact | End piece; ST; grey; polyamide RoHS : Compliant |
| 40 | ||
| 1546657-6 | TE Connectivity | Connector: PCB terminal block; power supply; 10A; 300V; PIN: 6 RoHS : Compliant |
| 40 | ||
| 6657S-1-103 | Bourns Inc | Potentiometer: shaft; 10kΩ; single turn; ±10%; 1.5W; linear; 6.35mm RoHS : Compliant |
| 9 | ||
| 2CMA166574R1000 | Amphenol Corporation | Connector: AC supply 3-phase; plug; female; power supply; 16A |
| 5 | ||
| 2CMA166572R1000 | Amphenol Corporation | Connector: AC supply 3-phase; plug; female; power supply; 16A RoHS : Compliant |
| 5 | ||
| 82-6657.2134 | EAO AG | Switch: vandal resistant; Pos: 2; SPDT; 82; 0.6A/35VAC; 600mA/35VDC |
| 4 | ||
| 1066579 | Bossard Group | Ball joint; 20mm; M24; 3; right hand thread,inside; steel; zinc |
| 0 | ||
| 1SNA166578R0100 | TE Connectivity | Cover; Essailec |
| 0 | ||
| 1986657 | Phoenix Contact | Comb bridge; PIN: 3; red; ways: 3; terminals: 3 RoHS : Compliant |
| 0 | ||
| 2665730000 | Weidmüller Interface GmbH & Co. KG | Surge arrester; Poles: 1; -40÷85°C; IP20 |
| 0 | ||
| 1665740000 | Weidmüller Interface GmbH & Co. KG | Protection cover; HDC; size 1; for cable; side; IP65; HDC RoHS : Compliant |
| 0 | ||
| 3-1879665-7 | TE Connectivity | Resistor: thin film; 29.4kΩ; THT; 250mW; ±0.1%; Ø2.5x7.2mm; axial RoHS : Compliant |
| 0 | ||
| 82-6657.1114 | EAO AG | Switch: vandal resistant; Pos: 2; SPDT; 82; 0.6A/35VAC; 600mA/35VDC |
| 0 | ||
| 66571 | Delock | Adapter; HDMI socket,USB C plug; HDMI 2.0,High Speed; 0.2m; grey |
| 0 | ||
![]() Verical | 66579-2 | TE Connectivity | 66579-2 TE Connectivity Connector Contact PIN 16 Size Crimp ST Cable Mount 16-18AWG Strip - Arrow.com RoHS : Compliant |
| 185,000 | |
| 66579-2 | TE Connectivity | 66579-2 TE Connectivity Connector Contact PIN 16 Size Crimp ST Cable Mount 16-18AWG Strip - Arrow.com RoHS : Compliant |
| 37,000 | ||
| 66570-2 | TE Connectivity | Contact PIN 20 Size Solder Cup ST Cable Mount 18AWG Strip RoHS : Compliant |
| 12,000 | ||
| 66570-8 | TE Connectivity | Contact PIN 20 Size Solder Cup ST Cable Mount 18AWG Box RoHS : Compliant |
| 2,200 | ||
| 66579-7 | TE Connectivity | Contact PIN 16 Size Crimp ST Cable Mount 16-18AWG Strip RoHS : Compliant |
| 910 | ||
| 6657S-1-502 | Bourns Inc | Res POT 5K Ohm 10% 1.5W 1(Elec)/1(Mech)Turns 6.34mm (33.34 X 41.86mm) Turret Panel Mount RoHS : Exempt |
| 100 | ||
| 6657S-1-102 | Bourns Inc | Res POT 1K Ohm 10% 1.5W 1(Elec)/1(Mech)Turns 6.34mm (33.34 X 41.86mm) Turret Panel Mount RoHS : Exempt |
| 52 | ||
| 6657S-1-102 | Bourns Inc | Res POT 1K Ohm 10% 1.5W 1(Elec)/1(Mech)Turns 6.34mm (33.34 X 41.86mm) Turret Panel Mount RoHS : Exempt |
| 50 | ||
| 6657S-1-103 | Bourns Inc | Res POT 10K Ohm 10% 1.5W 1(Elec)/1(Mech)Turns 6.34mm (33.34 X 41.86mm) Turret Panel Mount RoHS : Exempt |
| 48 | ||
| 6657S-1-502 | Bourns Inc | Res POT 5K Ohm 10% 1.5W 1(Elec)/1(Mech)Turns 6.34mm (33.34 X 41.86mm) Turret Panel Mount RoHS : Exempt |
| 23 | ||
| 665765-000 | TE Connectivity | HEAT SHRINK BOOT BACKSHELL RoHS : Compliant |
| 12 | ||
| 6-657555-5 | TE Connectivity | Draht Crimpers RoHS : Not Applicable |
| 8 | ||
| 6-657555-4 | TE Connectivity | Tools, Draht Crimper Tools RoHS : Not Applicable |
| 2 | ||
![]() Avnet Americas | 66570-3 | TE Connectivity | - Bulk (Alt: 66570-3) RoHS : Compliant |
| 39,000 | |
| 6657S-1-502 | Bourns Inc | - Bulk (Alt: 12F7109) RoHS : Not Compliant |
| 0 | ||
| 1SNA166577R2000 | TE Connectivity | CPT-2 - Bag (Alt: 1SNA166577R2000) RoHS : Not Compliant |
| 0 | ||
| 2-2176657-7 | TE Connectivity | MELF SMA-Q 1R87 1% 50PPM 0204 0.4W - Tape and Reel (Alt: 2-2176657-7) RoHS : Not Compliant |
| 0 | ||
| 66571WJ20SN | TE Connectivity | RECP ASSY - Bag (Alt: Y66571WJ20SN000000) RoHS : Not Compliant |
| 0 | ||
| 6657S-1-502 | Bourns Inc | - Bulk (Alt: 6657S-1-502) RoHS : Compliant |
| 0 | ||
| 6-2176657-1 | TE Connectivity | MELF SMA-Q 4R22 1% 50PPM 0204 0.4W - Tape and Reel (Alt: 6-2176657-1) RoHS : Not Compliant |
| 0 | ||
| Y66572FH35PN1KJGV3 | TE Connectivity | RECEP ASSY - Bag (Alt: Y66572FH35PN1KJGV3) RoHS : Not Compliant |
| 0 | ||
| CHM-6-65-70-27-XH20-F3-5 | Luminus Devices | - Trays (Alt: CHM-6-65-70-27-XH20-F3-5) RoHS : Compliant | 0 | |||
| CXM-6-65-70-18-AA40-F5-3 | Luminus Devices | F5-3 - Trays (Alt: CXM-6-65-70-18-AA40-F5-3) RoHS : Compliant |
| 0 | ||
| CXM-6-65-70-9-TE60-F7-2 | Luminus Devices | F7-2 - Trays (Alt: CXM-6-65-70-9-TE60-F7-2) RoHS : Compliant |
| 0 | ||
| 6-2176657-6 | TE Connectivity | MELF SMA-Q 4R75 1% 50PPM 0204 0.4W - Tape and Reel (Alt: 6-2176657-6) RoHS : Not Compliant |
| 0 | ||
| 6-657555-5 | TE Connectivity | - Bulk (Alt: 6-657555-5) RoHS : Not Compliant |
| 0 | ||
| 8-2176665-7 | TE Connectivity | MELF SMA-Q 76R8 0.1% 25PPM 0207 1W - Tape and Reel (Alt: 8-2176665-7) RoHS : Not Compliant |
| 0 | ||
| 7-2176665-7 | TE Connectivity | MELF SMA-Q 60R4 0.1% 25PPM 0207 1W - Tape and Reel (Alt: 7-2176665-7) RoHS : Not Compliant |
| 0 | ||
![]() Mouser Electronics | 66589-1 | TE Connectivity | Standard Circular Contacts SIGNAL PIN CNT 18-16 tin size 16 RoHS : Compliant |
| 26,634 | |
| 66577-2 | TE Connectivity | Standard Circular Contacts TYPE VI PIN CONT MULTI-MATE RoHS : Compliant |
| 9,247 | ||
| 66579-7 | TE Connectivity | Standard Circular Contacts TYPE VI PIN MULTI-MATE RoHS : Compliant |
| 5,000 | ||
| 66579-2 | TE Connectivity | Standard Circular Contacts TYPE VI PIN CONT,MULTI-MATE RoHS : Compliant |
| 4,620 | ||
| 66570-8 | TE Connectivity | D-Sub Contacts 20 DF PIN CONT SMALL RoHS : Compliant |
| 450 | ||
| 6657S-1-202 | Bourns Inc | Precision Potentiometers 2K 10% Bushing Mnt RoHS : Compliant |
| 238 | ||
| 6657S-1-102 | Bourns Inc | Precision Potentiometers 1K 10% Bushing Mnt RoHS : Compliant |
| 103 | ||
| 6657S-1-502 | Bourns Inc | Precision Potentiometers 5K 10% Bushing Mnt RoHS : Compliant |
| 61 | ||
| 6657S-1-103 | Bourns Inc | Precision Potentiometers 10K 10% Bushing Mnt 1% SINGLE TURN RoHS : Compliant |
| 59 | ||
| 6657S-1-203 | Bourns Inc | Precision Potentiometers 20K 10% Bushing Mnt 1% SINGLE TURN RoHS : Compliant |
| 19 | ||
| 6657S-48-203 | Bourns Inc | Precision Potentiometers 20K 1 5/6IN 1 TURN RoHS : Compliant |
| 18 | ||
| 6-65-7 | Eaton Corporation | Contactor Accessories CONTACT KIT, Frdm, SZ2, A1 AND B1, 2P |
| 0 | ||
| 66570-3 | TE Connectivity | D-Sub Contacts SOLDER PIN CNT 18 RoHS : Compliant |
| 0 | ||
| 6-657555-2 | TE Connectivity | Crimpers / Crimping Tools DRAHTCRIMPER |
| 0 | ||
| 66570-2 | TE Connectivity | D-Sub Contacts SOLDER CUP PIN CNTCT RoHS : Compliant |
| 0 | ||
![]() Arrow Electronics | 6657S-1-502 | Bourns Inc | Res POT 5K Ohm 10% 1.5W 1(Elec)/1(Mech)Turns 6.34mm (33.34 X 41.86mm) Turret Panel Mount RoHS : Exempt |
| 100 | |
| 6657S-1-102 | Bourns Inc | Res POT 1K Ohm 10% 1.5W 1(Elec)/1(Mech)Turns 6.34mm (33.34 X 41.86mm) Turret Panel Mount RoHS : Exempt |
| 50 | ||
![]() Newark | 2661665702 | Fair-Rite Products Corp | Ferrite Core, Cylindrical, 190 Ohm/100Mhz, 1Ghz; Outer Diameter:17.45Mm; Product Length:28.6Mm; Inner Diameter:9.5Mm; Frequency Min:200Mhz; Frequency Max:1Ghz; Impedance:450Ohm; Product Range:- Rohs Compliant: Yes |Fair-Rite 2661665702 RoHS : Compliant |
| 850 | |
| LT6657AHMS8-1.25#PBF | Analog Devices Inc | Volt Ref, 1.25V, Msop, -40 To 125Deg C; |Analog Devices, Inc. LT6657AHMS8-1.25#PBF RoHS : Compliant |
| 360 | ||
| LT6657BHMS8-1.25#PBF | Analog Devices Inc | Volt Ref, 1.25V, Msop, -40 To 125Deg C; |Analog Devices, Inc. LT6657BHMS8-1.25#PBF RoHS : Compliant |
| 102 | ||
| 1558665-7 | TE Connectivity | Power Relay, Spdt, 24Vdc, 250Vac, Th; |Te Connectivity Potter&brumfield 1558665-7 RoHS : Compliant |
| 45 | ||
| 1766657 | Phoenix Contact | Terminal Block, Header, 11Way, Th; |Phoenix Contact 1766657 RoHS : Compliant |
| 40 | ||
| 6657S-1-102 | Bourns Inc | Rotary Potentiometer, Precision, 6657S S; |Bourns, Inc. 6657S-1-102 RoHS : Compliant |
| 34 | ||
| 6657S-1-502 | Bourns Inc | Rotary Pot, 5Kohm, 1Turns, Linear; |Bourns, Inc. 6657S-1-502 RoHS : Compliant |
| 32 | ||
| 6657S-1-102 | Bourns Inc | Rotary Pot, 1Kohm, 1Turns, Linear; |Bourns, Inc. 6657S-1-102 RoHS : Compliant |
| 28 | ||
| LT6657BHMS8-3#PBF | Analog Devices Inc | Volt Ref, 3V, Msop, -40 To 125Deg C; |Analog Devices, Inc. LT6657BHMS8-3#PBF RoHS : Compliant |
| 20 | ||
| 7816.6571.0 | Molex Gwconnect | Hood, Side Entry, 16B, 2 Lever; |Molex/gwconnect 7816.6571.0 (Alternate Part Number: 887191851327 RoHS : Compliant |
| 14 | ||
| 82-6657.2000 | EAO AG | Pb Switch, Spdt, 0.6A, 35Vac, Panel; Product Range:82 Series; Panel Cutout Diameter:22Mm; Contact Configuration:Spdt; Switch Operation:Momentary; Pushbutton Actuator Style:Round Flush; Actuator/Cap Colour:Natural Rohs Compliant: Yes |Eao 82-6657.2000 RoHS : Compliant |
| 14 | ||
| 3036657 | Phoenix Contact | End Cover, Clamp Din Rail Terminal Block; |Phoenix Contact 3036657 RoHS : Compliant |
| 10 | ||
| 82-6657.2154 | EAO AG | Pb Switch, Spdt, 0.6A, 35Vac, Panel, Wht; Product Range:82 Series; Panel Cutout Diameter:22Mm; Contact Configuration:Spdt; Switch Operation:Maintained; Pushbutton Actuator Style:Round Flush; Actuator/Cap Colour:Natural Rohs Compliant: Yes RoHS : Compliant |
| 8 | ||
| 82-6657.2114 | EAO AG | Pb Switch, Spdt, 0.6A, 35Vac, Panel, Red; Product Range:82 Series; Panel Cutout Diameter:22Mm; Contact Configuration:Spdt; Switch Operation:Maintained; Pushbutton Actuator Style:Round Flush; Actuator/Cap Colour:Natural Rohs Compliant: Yes RoHS : Compliant |
| 7 | ||
| 82-6657.1154 | EAO AG | Pb Switch, Spdt, 0.6A, 35Vac, Panel, Wht; Product Range:82 Series; Panel Cutout Diameter:22Mm; Contact Configuration:Spdt; Switch Operation:Momentary; Pushbutton Actuator Style:Round Flush; Actuator/Cap Colour:Natural Rohs Compliant: Yes |Eao 82-6657.1154 RoHS : Compliant |
| 4 | ||
![]() Analog Devices Inc | MAX6657MSA+T | Analog Devices Inc | ±1°C, SMBus-Compatible Remote/ RoHS : Compliant |
| 28,328 | |
| MAX6657MSA+ | Analog Devices Inc | ±1°C, SMBus-Compatible Remote/ RoHS : Compliant |
| 5,348 | ||
| LT6657BHMS8-4.096#TRPBF | Analog Devices Inc | 1.5ppm/°C Drift, L N, Bufed Re RoHS : Compliant |
| 2,500 | ||
| LT6657AHMS8-1.25#TRPBF | Analog Devices Inc | 1.5ppm/°C Drift, L N, Bufed Re RoHS : Compliant |
| 2,500 | ||
| LT6657AHMS8-4.096#PBF | Analog Devices Inc | 1.5ppm/°C Drift, L N, Bufed Re RoHS : Compliant |
| 50 | ||
| LT6657BHMS8-5#PBF | Analog Devices Inc | 1.5ppm/°C Drift, L N, Bufed Re RoHS : Compliant |
| 12 | ||
| LT6657AHMS8-2.5#TRPBF | Analog Devices Inc | 1.5ppm/°C Drift, L N, Bufed Re RoHS : Compliant |
| 8 | ||
AD6657ABBCZRL![]() | Analog Devices Inc | Quad IF Diversity Receiver RoHS : Compliant |
| 0 | ||
| LT6657BHMS8-1.25#TRPBF | Analog Devices Inc | 1.5ppm/°C Drift, L N, Bufed Re RoHS : Compliant |
| 0 | ||
| LT6657AHMS8-5#TRPBF | Analog Devices Inc | 1.5ppm/°C Drift, L N, Bufed Re RoHS : Compliant |
| 0 | ||
| LT6657AHMS8-4.096#TRPBF | Analog Devices Inc | 1.5ppm/°C Drift, L N, Bufed Re RoHS : Compliant |
| 0 | ||
| LT6657BHMS8-3#TRPBF | Analog Devices Inc | 1.5ppm/°C Drift, L N, Bufed Re RoHS : Compliant |
| 0 | ||
AD6657BBCZRL![]() | Analog Devices Inc | 11 Bit 185 Msps Quad IF Receiv RoHS : Compliant |
| 0 | ||
| LT6657AHMS8-3#TRPBF | Analog Devices Inc | 1.5ppm/°C Drift, L N, Bufed Re RoHS : Compliant |
| 0 | ||
AD6657BBCZ![]() | Analog Devices Inc | 11 Bit 185 Msps Quad IF Receiv RoHS : Compliant |
| 0 | ||
![]() RS | 6657S-1-502 | Bourns Inc | POTENTIOMETER CONDUCTIVE PLASTIC 1 TURN 5 KOHMS POWER 1.5W 6657 SERIES RoHS : Compliant |
| 213 | |
| 1796657 | RS Pro | LEADED ROSIN MILD SOLDER 0.5MM 500G |
| 47 | ||
| 866579 | RS Pro | REPLACEMENT STEEL SPLIT RING 38MM OD |
| 40 | ||
| 556657 | RS Pro | CAT5E CABLE GRAY UNSHIELDED PVC MALE RJ45 MALE RJ45 TERMINATION 6.56 FT (2M) |
| 20 | ||
| 1986657 (FBSK 3-10/ZFKDS 10) | Phoenix Contact | BRIDGE 10MM 3 POSITION COMBICON SERIES |
| 20 | ||
| NEBV-H1G2-KN-5-N-LE2 (566657) | Festo | CABLE ASSEMBLY, 3 PIN ANGULAR PLUG SOCKET, 2 CONDUCTOR WIRES, OPEN END, 5 M L |
| 19 | ||
| 6657706 | RS Pro | PF-19 VENTILATED RACKMOUNT ENCLOSURE WITH HANDLES 1U 84 HP 90MM DEEP |
| 16 | ||
| 82-6657.2000 | EAO AG | PUSHBUTTON SWITCH, MAINTAINED, M12 CONNECTOR, 22MM, STAINLESS STEEL RoHS : Compliant |
| 15 | ||
| 6657652 | RS Pro | VENTILATED TOP COVER FOR USE WITH 19IN DUTY RACKING SYSTEM STEEL FRAME |
| 10 | ||
| 6657680 | RS Pro | RACK MOUNT CASE 19 X 14 X 3.5IN (483 X 350 X 88MM) BLACK, GRAY ALUMINUM PANELS |
| 10 | ||
| 6657716 | RS Pro | VENTILATED RACKMOUNT ENCLOSURE 3U 19 X 13.2 X 5.3IN (483X335X132MM) BLACK |
| 10 | ||
| 6657598 | RS Pro | AUDIO & VIDEO CONNECTOR ADAPTER CONVERTS RCA TO BNC GOLD PLATED BRASS |
| 8 | ||
| 82-6657.2114 | EAO AG | PUSHBUTTON SWITCH, ILLUMINATED - RED, 24V DC, MAINT., M12, 22MM, STAINLESS STEE |
| 5 | ||
| 6657649 | RS Pro | VENTILATED HEAVY DUTY RACK CASE 5U 222X483X466MM |
| 1 | ||
| 1SNA166578R0100 (016657801) | TE Connectivity | CPC-1 PROTECTIVE COVER, ENTRELEC |
| 1 | ||
![]() Microchip Technology Inc | JANTX1N6657 | Microchip Technology Inc | UFR,FRR _ TO-254, Projected EOL: 2049-02-05 RoHS : Compliant |
| 344 | |
| JANTX1N6657R | Microchip Technology Inc | UFR,FRR _ TO-254, Projected EOL: 2049-02-05 RoHS : Compliant |
| 222 | ||
| 1N6657 | Microchip Technology Inc | UFR,FRR _ TO-254, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 1N6657R | Microchip Technology Inc | UFR,FRR _ TO-254, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JAN1N6657 | Microchip Technology Inc | UFR,FRR _ TO-254, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JAN1N6657R | Microchip Technology Inc | UFR,FRR _ TO-254, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANTXV1N6657 | Microchip Technology Inc | UFR,FRR _ TO-254, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANTXV1N6657R | Microchip Technology Inc | UFR,FRR _ TO-254, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | MS24665-704 | MS Pins | 920 | |||
| 10665739 | RAF Electronic Hardware | 162 | ||||
| MS24665-71 | MS Pins | 116 | ||||
| MS24665-766 | MS Pins | 69 | ||||
| MS24665-705 | MS Pins | 51 | ||||
| MS16556-657 | MS Pins | 39 | ||||
| 66570-3 | TE Connectivity | RoHS : Compliant | 21 | |||
| 435-6657-01-00-00 | Cambion Electronics Ltd | 21 | ||||
| 66570-8 | TE Connectivity | RoHS : Compliant | 15 | |||
| 1546657-8 | TE Connectivity | RoHS : Compliant | 1 | |||
![]() Onlinecomponents.com | 391-6657-000 | ITT Interconnect Solutions | Itt Cannon |Itt Cannon 391-6657-000 RoHS : Compliant |
| 277 | |
| 6657S-1-102 | Bourns Inc | Res POT 1K Ohm 10% 1.5W 1(Elec)/1(Mech)Turns 6.34mm (33.34 X 41.86mm) Turret Panel Mount RoHS : Compliant |
| 54 | ||
| 6657S-1-103 | Bourns Inc | Res POT 10K Ohm 10% 1.5W 1(Elec)/1(Mech)Turns 6.34mm (33.34 X 41.86mm) Turret Panel Mount RoHS : Compliant |
| 50 | ||
| 6657S-1-502 | Bourns Inc | Res POT 5K Ohm 10% 1.5W 1(Elec)/1(Mech)Turns 6.34mm (33.34 X 41.86mm) Turret Panel Mount RoHS : Compliant |
| 24 | ||
| C115371-6657 | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| 6657S-1-203 | Bourns Inc | PRECISION POT - 1 5/16(33MM) 1-TURN CPBulk, Bag Packaging | Bourns 6657S-1-203 RoHS : Compliant |
| 0 | ||
| 6657S-1-503 | Bourns Inc | Precision Potentiometers 1-15/16 CP 50KOHMS 1% SINGLE TURN RoHS : Compliant |
| 0 | ||
| 6657S-1-202 | Bourns Inc | Res POT 2K Ohm 10% 1.5W 1(Elec)/1(Mech)Turns 6.34mm (33.34 X 41.86mm) Turret Panel Mount RoHS : Compliant |
| 0 | ||
| 6657S-1-104 | Bourns Inc | PRECISION POT - 1 5/16(33MM) 1-TURN CPBulk, Bag Packaging | Bourns 6657S-1-104 RoHS : Compliant |
| 0 | ||
| 6657S-463-103 | Bourns Inc | RoHS : Compliant |
| 0 | ||
| 6657S-463-102 | Bourns Inc | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | AD6657ABBCZRL![]() | Analog Devices Inc | RF Receiver 800MHz 144-BGA T/R RoHS : Compliant |
| 11,090 | |
AD6657BBCZRL![]() | Analog Devices Inc | RF Receiver 800MHz 144-BGA T/R RoHS : Compliant |
| 1,500 | ||
AD6657BBCZ![]() | Analog Devices Inc | RF Receiver 800MHz 144-BGA Tray RoHS : Compliant |
| 92 | ||
| MAX6657MSA+ | Analog Devices Inc | Temperature Sensor ICs I²C/SMBus Digital, Local/Remote 8-SOIC Tube RoHS : Compliant |
| 116 | ||
SN74ABT16657DLR![]() | Texas Instruments | Bus Transceiver 2 Element 8 Bits 5V 56-SOP T/R RoHS : Compliant |
| 3,500 | ||
74ACT16657DL![]() | Texas Instruments | Bus Transceiver, ACT Series, 2-Func, 8-Bit, True Output, CMOS, PDSO56 RoHS : Compliant |
| 2,353 | ||
74ACT16657DLR![]() | Texas Instruments | Bus Transceiver 2 Element 8 Bits 5V 56-SOP T/R RoHS : Compliant |
| 26,000 | ||
LMH6657MFX/NOPB![]() | Texas Instruments | Op Amp Standard 140MHz SOT-23-5 T/R RoHS : Compliant |
| 34,880 | ||
SN74ABT16657DGGR![]() | Texas Instruments | Bus Transceiver, ABT Series, 2-Func, 8-Bit, True Output, BICMOS, PDSO56 RoHS : Compliant |
| 6,000 | ||
| XRP6657IHBTR-F | MaxLinear Inc | IC VOLT REG Adjustable Step-Down Buck 1 OUT 600mV - 5.5V 1.5A 6-SON RoHS : Compliant |
| 13 | ||
| MAX6657MSA | Maxim Integrated Products | Temperature Sensor ICs I²C/SMBus Digital, Local/Remote 8-SOIC Tube RoHS : Not Compliant |
| 635 | ||
| MAX6657YMSA+ | Maxim Integrated Products | Temperature Sensor ICs I²C/SMBus Digital, Local/Remote 8-SOIC Tube RoHS : Compliant |
| 18,200 | ||
| LMH6657MFX/NOPB | National Semiconductor Corporation | Op Amp Standard 140MHz SOT-23-5 T/R RoHS : Compliant |
| 20,780 | ||
| LMH6657MG/NOPB | National Semiconductor Corporation | Op Amp Standard 140MHz SOT-353 T/R RoHS : Compliant |
| 949 | ||
| LMH6657MGX/NOPB | National Semiconductor Corporation | Video Amplifier, 1 Channel(s), 1 Func, PDSO5 RoHS : Compliant |
| 23,500 | ||
![]() Sager | 1SNA166577R2000 | TE Connectivity | DIN Rail Terminal Blocks |
| 0 | |
| 2-2176657-7 | TE Connectivity | MELF SMA-Q 1R87 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | ||
| 926657-6 | TE Connectivity | Headers & Wire Housings LOCKING CLIP HSG 6P RoHS : Compliant | 0 | |||
| 6-2176657-1 | TE Connectivity | MELF SMA-Q 4R22 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | ||
| 1986657 | Phoenix Contact | Terminal Block Tools & Accessories FBSK 3-10/ZFKDS 10 RoHS : Compliant |
| 0 | ||
| 1066577 | Phoenix Contact | GFKC 2 5/10-STF-7 62 BK AU |
| 0 | ||
| D66574A001 | TE Connectivity | TE Connectivity 202K163-25-30-0 RoHS : Compliant | 0 | |||
| 6-2176657-6 | TE Connectivity | MELF SMA-Q 4R75 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | ||
| 6-657555-5 | TE Connectivity | Crimpers / Crimping Tools DRAHTCRIMPER |
| 0 | ||
| 8-2176665-7 | TE Connectivity | MELF SMA-Q 76R8 0.1% 25PPM 0207 1W RoHS : Compliant |
| 0 | ||
| 7-2176665-7 | TE Connectivity | MELF SMA-Q 60R4 0.1% 25PPM 0207 1W RoHS : Compliant |
| 0 | ||
| 5-2176657-6 | TE Connectivity | MELF SMA-Q 3R74 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | ||
| 8-2176657-1 | TE Connectivity | MELF SMA-Q 6R81 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | ||
| 2-2176657-1 | TE Connectivity | MELF SMA-Q 1R62 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | ||
| 2176657-8 | TE Connectivity | MELF SMA-Q 1R18 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | TMS320C6657CZH![]() | Texas Instruments | TMS320C6657CZH, 16bit 数字信号处理器, 1250MHz, 32 kB ROM 闪存, 1024 kB RAM 1 1 1, 625针 FCBGA封装 RoHS : Compliant | 126 | ||
![]() ComSIT USA | LMH6657MG![]() | Texas Instruments | 270MHZ SINGLE SUPPLY, SINGLE AMPLIFIER Video Amplifier, 1 Channel(s), 1 Func, PDSO5 RoHS : Not Compliant | 1,070 | ||
| 220096657 | Samtec Inc | Electronic Component RoHS : Compliant | 380 | |||
| 1436657 | Phoenix Contact | Circular Connector RoHS : Compliant | 60 | |||
TMS320C6657CZHA25![]() | Texas Instruments | Digital Signal Processor, 32-Bit Size, 16-Ext Bit, 1250MHz, CMOS, PBGA625 RoHS : Compliant | 12 | |||
![]() Interstate Connecting Components | 1SNA166577R2000 | TE Connectivity | CPT-2 | 0 | ||
| 2-2176657-7 | TE Connectivity | MELF SMA-Q 1R87 1% 50PPM 0204 RoHS : Compliant | 0 | |||
| 6-1879665-7 | TE Connectivity | H8 60K4 0.1% 15PPM RoHS : Compliant |
| 0 | ||
| 6-2176657-1 | TE Connectivity | MELF SMA-Q 4R22 1% 50PPM 0204 RoHS : Compliant | 0 | |||
| Y66572FH35PN1KJGV3 | TE Connectivity | RECEP ASSY | 0 | |||
| 6-2176657-6 | TE Connectivity | MELF SMA-Q 4R75 1% 50PPM 0204 RoHS : Compliant | 0 | |||
| 6-657555-5 | TE Connectivity | DRAHTCRIMPER |
| 0 | ||
| 8-2176665-7 | TE Connectivity | MELF SMA-Q 76R8 0.1% 25PPM 020 RoHS : Compliant | 0 | |||
| 85996657913 | SOURIAU-SUNBANK | J59612 | 0 | |||
| 7-2176665-7 | TE Connectivity | MELF SMA-Q 60R4 0.1% 25PPM 020 RoHS : Compliant | 0 | |||
| 5-2176657-6 | TE Connectivity | MELF SMA-Q 3R74 1% 50PPM 0204 RoHS : Compliant | 0 | |||
| Y66572FG35PN1KJGV3 | TE Connectivity | RECEP ASSY | 0 | |||
| 8-2176657-1 | TE Connectivity | MELF SMA-Q 6R81 1% 50PPM 0204 RoHS : Compliant | 0 | |||
| 2-2176657-1 | TE Connectivity | MELF SMA-Q 1R62 1% 50PPM 0204 RoHS : Compliant | 0 | |||
| 2176657-8 | TE Connectivity | MELF SMA-Q 1R18 1% 50PPM 0204 RoHS : Compliant | 0 | |||
![]() PEI Genesis | 2CMA166572R1000 | Amphenol Tuchel |
| 7 | ||
| 2CMA166572R1000 | Amphenol Sine Systems |
| 5 | |||
| 10-665796-005 | Amphenol Corporation |
| 0 | |||
| CA140266-57 | ITT Interconnect Solutions |
| 0 | |||
| C10-665796-001 | Amphenol Corporation |
| 0 | |||
| 186-6575 O-HEAT | Dialight |
| 0 | |||
| 186-6575 RPD HTR | Dialight |
| 0 | |||
![]() Powell Electronics | 1546657-9 | TE Connectivity | Terminal Blocks RoHS : Compliant |
| 3,165 | |
| 1546657-5 | TE Connectivity | Terminal Blocks RoHS : Compliant |
| 1,848 | ||
| 66570-8 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 1,467 | ||
| 86657-2 | TE Connectivity | FFC RECPT CONTACT-L P RoHS : Compliant |
| 990 | ||
| 1-926657-0 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 274 | ||
| 926657-9 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 242 | ||
| 5-826657-0 | TE Connectivity | Connectors RoHS : Compliant |
| 150 | ||
| 2-1879665-7 | TE Connectivity | Resistors RoHS : Compliant |
| 41 | ||
| 1546657-6 | TE Connectivity | Terminal Blocks RoHS : Compliant |
| 26 | ||
| EH6657-000 | TE Connectivity | adapters |
| 17 | ||
| 926657-6 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 15 | ||
| 665765-000 | TE Connectivity | adapters |
| 8 | ||
| 6-657555-5 | TE Connectivity | Tools |
| 5 | ||
| 24-7-26657 REV: A | Amphenol Positronic | Rack & Panel Connector |
| 2 | ||
| 6-657555-4 | TE Connectivity | Tools |
| 1 | ||
![]() Chip 1 Exchange | 926657-4 | TE Connectivity | INSTOCK RoHS : Compliant | 17,885 | ||
| 926657-6 | TE Connectivity | INSTOCK RoHS : Compliant | 10,400 | |||
| 926657-2 | TE Connectivity | INSTOCK RoHS : Compliant | 7,814 | |||
| 1-926657-5 | TE Connectivity | INSTOCK RoHS : Compliant | 6,988 | |||
| 1-926657-1 | TE Connectivity | INSTOCK RoHS : Compliant | 3,647 | |||
| 926657-3 | TE Connectivity | INSTOCK RoHS : Compliant | 2,762 | |||
| 26657.330.185 | Lear Corporation | INSTOCK RoHS : Unknown | 2,709 | |||
| 1766576- | INSTOCK | 406 | ||||
| H6657P-20 | TE Connectivity | INSTOCK | 368 | |||
| H6657P-6 | INSTOCK | 25 | ||||
SN74ABT16657DL![]() | Texas Instruments | INSTOCK RoHS : Compliant | 20 | |||
![]() Avnet Abacus | 926657-4 | TE Connectivity | (Alt: 926657-4) RoHS : Compliant | 1,000 | ||
| 2956657 | Phoenix Contact | UMBE 351 UMBE351 (Alt: 2956657) RoHS : Compliant | 30 | |||
| 1986657 | Phoenix Contact | FBSK 310ZFKDS 10 FBSK310ZFKDS10 (Alt: 1986657) RoHS : Compliant | 0 | |||
| 926657-6 | TE Connectivity | (Alt: 926657-6) RoHS : Compliant | 0 | |||
| 926657-6 | TE Connectivity | (Alt: 926657-6) RoHS : Compliant | 0 | |||
| 446657-1 | TE Connectivity | (Alt: 446657-1) RoHS : Compliant | 0 | |||
| 6-657555-5 | TE Connectivity | (Alt: 6-657555-5) RoHS : Not Compliant | 0 | |||
| 5-926657-3 | TE Connectivity | AMP59266573 (Alt: 5-926657-3) RoHS : Compliant | 0 | |||
| 6657S-1-502 | Bourns Inc | (Alt: 6657S-1-502) RoHS : Compliant | 0 | |||
| 2-1437665-7 | TE Connectivity | (Alt: 2-1437665-7) RoHS : Compliant | 0 | |||
| 5-1437665-7 | TE Connectivity | (Alt: 5-1437665-7) RoHS : Compliant | 0 | |||
| 1-1546657-0 | TE Connectivity | Conn Barrier Strip 10 POS 635mm Solder ST ThruHole 10AContact (Alt: 1-1546657-0) RoHS : Compliant | 0 | |||
| 1-1546657-0 | TE Connectivity | Conn Barrier Strip 10 POS 635mm Solder ST ThruHole 10AContact (Alt: 1-1546657-0) RoHS : Compliant | 0 | |||
| BFC236657682 | Vishay Intertechnologies | General Purpose Film Capacitor Metallized Polyester Radial Box 2 Pin 6800 pF 5 220 V - Tape and Reel (Alt: BFC236657682) RoHS : Compliant | 0 | |||
| 56657 716 099 SAMPLE | Varta | EasyBlock 24V 25Ah LiFePO4 Cylindrical (Alt: 56657 716 099 SAMPLE) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | 10182665-7LF002LF | Amphenol Corporation | (Alt: 10182665-7LF002LF) RoHS : Compliant | 0 | ||
| 10182665-7RF001LF | Amphenol Corporation | (Alt: 10182665-7RF001LF) RoHS : Compliant | 0 | |||
| 2486657-1 | TE Connectivity | (Alt: 2486657-1) RoHS : Compliant | 0 | |||
| 2166570109 | Molex | 0.4 BT BTB H07 10P PLUG E (Alt: 2166570109) RoHS : Compliant | 0 | |||
| 1546657-4 | TE Connectivity | (Alt: 1546657-4) RoHS : Compliant | 0 | |||
![]() Avnet Silica | TEF6657HN/V102K![]() | NXP Semiconductors | DSPBased Radio Tuner IC 32 Pins HVQFN (Alt: TEF6657HN/V102K) RoHS : Compliant | 0 | ||
![]() Chip-Germany GmbH | GMSTBV2,5/3G-7,62 1766576 | Phoenix Contact | 5 | |||
![]() Component Electronics, Inc | 916657-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,466 | |
| C06657 | Hammond Manufacturing | IN STOCK SHIP TODAY |
| 300 | ||
| 5942-00-946-6579 | WESCOM | IN STOCK SHIP TODAY | 33 | |||
![]() DB Roberts | H3-66-577-071 | Southco | The swinghandle nests into the housing for minimal protrusion and pops up to swing smoothly for easy latch actuation. Robust die-cast zinc construction provides durable corrosion-resistant performance with optional gasketing for indoor or outdoor use. | 0 | ||
| 466575 | Essentra Components | 0 | ||||
| 466579 | Essentra Components | 0 | ||||
| 466572 | Essentra Components | 25MM ROUND LOW PROFILE GLIDE L | 0 | |||
| H3-66-572-071 | Southco | The swinghandle nests into the housing for minimal protrusion and pops up to swing smoothly for easy latch actuation. Robust die-cast zinc construction provides durable corrosion-resistant performance with optional gasketing for indoor or outdoor use. | 0 | |||
| 466571 | Essentra Components | 24MM ROUND LOW PROFILE GLIDE L | 0 | |||
| 466574 | Essentra Components | 0 | ||||
| H3-66-571-071 | Southco | The swinghandle nests into the housing for minimal protrusion and pops up to swing smoothly for easy latch actuation. Robust die-cast zinc construction provides durable corrosion-resistant performance with optional gasketing for indoor or outdoor use. | 0 | |||
| H3-66-573-071 | Southco | The swinghandle nests into the housing for minimal protrusion and pops up to swing smoothly for easy latch actuation. Robust die-cast zinc construction provides durable corrosion-resistant performance with optional gasketing for indoor or outdoor use. | 0 | |||
| 466573 | Essentra Components | 0 | ||||
| 466576 | Essentra Components | 35MM ROUND LOW PROFILE GLIDE L | 0 | |||
| 466570 | Essentra Components | 0 | ||||
| 466578 | Essentra Components | 0 | ||||
| 466577 | Essentra Components | 38MM ROUND LOW PROFILE GLIDE L | 0 | |||
| H3-66-570-071 | Southco | The swinghandle nests into the housing for minimal protrusion and pops up to swing smoothly for easy latch actuation. Robust die-cast zinc construction provides durable corrosion-resistant performance with optional gasketing for indoor or outdoor use. | 0 | |||
![]() EBV Elektronik | TEF6657HN/V102K![]() | NXP Semiconductors | DSPBased Radio Tuner IC 32 Pins HVQFN (Alt: TEF6657HN/V102K) RoHS : Compliant | 0 | ||
| 8265.D2WMLG 946657 | Intel Corporation | Dual Band Wireless for 8000 Series (Alt: 946657) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 06657240-601 REV 01 | Cable Assembly | Cable Assembly | 14 | ||
| 466576 RULER | FDH Electronics | Supplies - ESG | 2 | |||
| 06657207-603 REV 02 | Cable Assembly | Cable Assembly | 1 | |||
| 85996657913 | SOURIAU-SUNBANK | Connector 38999 |
| 0 | ||
| 85996657911 | SOURIAU-SUNBANK | Connector 38999 |
| 0 | ||
![]() Flip Electronics | XRP6657IHBTR-F | MaxLinear Inc | Stock, Ship Today RoHS : Compliant |
| 83,121 | |
| TEF6657HN/V101,518 | NXP Semiconductors | Stock | 6,000 | |||
![]() Master Electronics | 6657S-1-502 | Bourns Inc | Res POT 5K Ohm 10% 1.5W 1(Elec)/1(Mech)Turns 6.34mm (33.34 X 41.86mm) Turret Panel Mount RoHS : Compliant |
| 24 | |
| 1SNA166577R2000 | TE Connectivity | ABB-CONNECTION - SNA SERIES ACCESSORIES RoHS : Compliant |
| 0 | ||
| 2-2176657-7 | TE Connectivity | MELF SMA-Q 1R87 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | ||
| 926657-6 | TE Connectivity | LOCKING CLIP HSG RoHS : Compliant |
| 0 | ||
| 66571WJ20SN | TE Connectivity | RECP ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| 6-1879665-7 | TE Connectivity | Res Metal Film 60.4K Ohm 0.1% 0.25W(1/4W) ±15ppm/°C Conformal Coated AXL Bandoliered RoHS : Compliant |
| 0 | ||
| 6-2176657-1 | TE Connectivity | MELF SMA-Q 4R22 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | ||
| TFSDT-20-28-G-66.57-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1986657 | Phoenix Contact | Fixed bridge - fully insulated - pitch: 10 mm - no. of positions: 3 RoHS : Compliant |
| 0 | ||
| Y66572FH35PN1KJGV3 | TE Connectivity | RECEP ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1066577 | Phoenix Contact | GFKC 2 5/10-STF-7 62 BK AU RoHS : Compliant |
| 0 | ||
| 6-2176657-6 | TE Connectivity | MELF SMA-Q 4R75 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | ||
| 6-657555-5 | TE Connectivity | DRAHTCRIMPER RoHS : Not Compliant |
| 0 | ||
| 8-2176665-7 | TE Connectivity | MELF SMA-Q 76R8 0.1% 25PPM 0207 1W MOQ Reduction RoHS : Compliant |
| 0 | ||
| 6657S-463-102 | Bourns Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 6657S-1-502 | Bourns Inc | Potentiometer Conductive Plastic 1 Turn 5 kOhms Power 1.5W 6657 Series RoHS : Compliant |
| 50 | |
| 1665750000 | Weidmüller Interface GmbH & Co. KG | Heavy Duty Power Connectors HDC 04A DMDL 2BO RoHS : Compliant |
| 50 | ||
| 6657S-1-102 | Bourns Inc | Potentiometer Conductive Plastic 1 Turn 1 kOhms Power 1.5W 6657 Series RoHS : Compliant |
| 50 | ||
| 82-6657.1134 | EAO AG | Pushbutton Switch, Illuminated - Green, 24V DC, Mom., M12, 22mm, Stainless Stee |
| 50 | ||
| 82-6657.2154 | EAO AG | EAO 82-6657.2154 Pushbutton Switch, Illuminated - Wht, 24V DC, Maint., M12, 22mm, Stainless Stl |
| 35 | ||
| 82-6657.1000 | EAO AG | Pushbutton Switch, Momentary, M12 Connector, 22mm, Stainless Steel |
| 26 | ||
| 82-6657.2000 | EAO AG | Pushbutton Switch, Maintained, M12 Connector, 22mm, Stainless Steel RoHS : Compliant |
| 24 | ||
| 1665790000 | Weidmüller Interface GmbH & Co. KG | Heavy Duty Power Connectors HDC 32A TOBU 1PG21G RoHS : Compliant |
| 16 | ||
| 82-6657.2114 | EAO AG | Pushbutton Switch, Illuminated - Red, 24V DC, Maint., M12, 22mm, Stainless Stee |
| 10 | ||
| 82-6657.2124 | EAO AG | EAO 82-6657.2124 Pushbutton Switch, Illuminated - Blue, 24V DC, Maint., M12, 22mm, Stainless Stl |
| 10 | ||
| 1665740000 | Weidmüller Interface GmbH & Co. KG | Heavy Duty Power Connectors HDC 04A DODL 2BO RoHS : Compliant |
| 4 | ||
| MPDB66572 | Mersen Electrical Power | Barrier Terminal Blocks PWR DIS BLK CU INT 175A 2P 4 |
| 3 | ||
| 2956657 | Phoenix Contact | Enclosures, Boxes, & Cases BASE ELEM W/OSNAP FT RoHS : Compliant |
| 0 | ||
| 1665760000 | Weidmüller Interface GmbH & Co. KG | Heavy Duty Power Connectors HDC 07A DODL 2BO RoHS : Compliant |
| 0 | ||
| 2866572 | Phoenix Contact | UPS - Uninterruptible Power Supplies MINI-BAT/12DC/1.6AH BATTERY ONLY RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE36657 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable Using RG393 Coax. PE36657 is a 7/16 DIN male to 7/16 DIN male right angle cable using RG393 coax. This Pasternack 7/16 DIN male to 7/16 DIN male right angle cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. 7/16 DIN to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 7/16 DIN to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE36657 7/16 DIN male to 7/16 DIN male right angle cable assembly is constructed with RG393 coax. | 0 | ||
| PE36657/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable 36 Inch Length Using RG393 Coax with HeatShrink., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable 36 inch length using RG393 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male right angle cable 36 inch length using RG393 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE36657/HS-36 can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.900 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36657/HS-36 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE36657/HS-36 RF cable are available on our downloadable PDF datasheet.PE36657/HS-36 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements. |
| 0 | ||
| PE36657LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable 12 Inch Length Using RG393 Coax, LF Solder., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable 12 inch length using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male right angle cable 12 inch length using RG393 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE36657LF-12 can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36657LF-12 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE36657LF-12 RF cable are available on our downloadable PDF datasheet.PE36657LF-12 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements. |
| 0 | ||
| PE36657-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 48 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable 48 Inch Length Using RG393 Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable 48 inch length using RG393 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male right angle cable 48 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE36657-48, can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36657-48 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7/16 DIN male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36657-48 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male right angle cable 48 inch length using RG393 coax. |
| 0 | ||
| PE36657/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable 24 Inch Length Using RG393 Coax with HeatShrink., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable 24 inch length using RG393 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male right angle cable 24 inch length using RG393 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE36657/HS-24 can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.900 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36657/HS-24 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE36657/HS-24 RF cable are available on our downloadable PDF datasheet.PE36657/HS-24 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements. |
| 0 | ||
| PE3C6657LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: NMO Mount, Connector Gender 1: Sexless, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. NMO Mount Sexless to TNC Male Cable Using LMR-195 Coax with HeatShrink, LF Solder. PE3C6657LF/HS is a NMO Mount sexless to TNC male cable using LMR-195 coax. This Pasternack NMO Mount sexless to TNC male cable assembly uses a 50 Ohm NMO Mount for connector 1 and a 50 Ohm TNC for connector 2. Our sexless NMO Mount to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C6657LF/HS NMO Mount sexless to TNC male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE36657LF-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable 36 Inch Length Using RG393 Coax, LF Solder., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable 36 inch length using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male right angle cable 36 inch length using RG393 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE36657LF-36 can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36657LF-36 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE36657LF-36 RF cable are available on our downloadable PDF datasheet.PE36657LF-36 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements. |
| 0 | ||
| PE36657-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 24 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable 24 Inch Length Using RG393 Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable 24 inch length using RG393 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male right angle cable 24 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE36657-24, can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36657-24 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7/16 DIN male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36657-24 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male right angle cable 24 inch length using RG393 coax. |
| 0 | ||
| PE36657/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable 12 Inch Length Using RG393 Coax with HeatShrink., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable 12 inch length using RG393 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male right angle cable 12 inch length using RG393 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE36657/HS-12 can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.900 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36657/HS-12 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE36657/HS-12 RF cable are available on our downloadable PDF datasheet.PE36657/HS-12 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements. |
| 0 | ||
| PE36657LF | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable Using RG393 Coax, LF Solder., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male right angle cable using RG393 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE36657LF can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36657LF is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE36657LF RF cable are available on our downloadable PDF datasheet.PE36657LF can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements. | 0 | |||
| PE36657/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable Using RG393 Coax with HeatShrink., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable using RG393 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male right angle cable using RG393 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE36657/HS can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.900 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36657/HS is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE36657/HS RF cable are available on our downloadable PDF datasheet.PE36657/HS can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements. | 0 | |||
| PE36657LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable 36 Inch Length Using RG393 Coax with HeatShrink, LF Solder., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable 36 inch length using RG393 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male right angle cable 36 inch length using RG393 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE36657LF/HS-36 can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36657LF/HS-36 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE36657LF/HS-36 RF cable are available on our downloadable PDF datasheet.PE36657LF/HS-36 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements. |
| 0 | ||
| PE36657LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable Using RG393 Coax with HeatShrink, LF Solder., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable using RG393 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male right angle cable using RG393 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE36657LF/HS can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36657LF/HS is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE36657LF/HS RF cable are available on our downloadable PDF datasheet.PE36657LF/HS can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements. | 0 | |||
| PE36657LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable 24 Inch Length Using RG393 Coax with HeatShrink, LF Solder., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable 24 inch length using RG393 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male right angle cable 24 inch length using RG393 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE36657LF/HS-24 can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36657LF/HS-24 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE36657LF/HS-24 RF cable are available on our downloadable PDF datasheet.PE36657LF/HS-24 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements. |
| 0 | ||
| PE36657LF/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable 60 Inch Length Using RG393 Coax with HeatShrink, LF Solder., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable 60 inch length using RG393 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male right angle cable 60 inch length using RG393 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE36657LF/HS-60 can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36657LF/HS-60 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE36657LF/HS-60 RF cable are available on our downloadable PDF datasheet.PE36657LF/HS-60 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements. |
| 0 | ||
![]() TE Connectivity | 66570-2 | TE Connectivity | 20 DF PIN PLTD Contact Mating Area Plating Material: Gold (Au) Contact Type: Pin Wire Size: 18 AWG Wire Size: .8 – .9 mm² Contact Retention Type Within Housing: Snap-In Gold (Au) Pin 18 AWG .8 – .9 mm² | TE Connectivity RoHS : Compliant |
| 64,977 | |
| 66570-8 | TE Connectivity | 20 DF PIN CONT,SMALL PACK Contact Mating Area Plating Material: Gold (Au) Contact Type: Pin Wire Size: 18 AWG Wire Size: .8 – .9 mm² Contact Retention Type Within Housing: Snap-In Gold (Au) Pin 18 AWG .8 – .9 mm² | TE Connectivity RoHS : Compliant |
| 510 | ||
| 1546657-4 | TE Connectivity | 4P PCV DUAL BARRIER,0.250 Number of Positions: 4 Barrier Strip Style: Dual Barrier Bottom Termination Type: Printed Circuit Pin Connector System: Wire-to-Board Centerline (Pitch): .25 in Ampseal Header | 4 Dual Barrier Printed Circuit Pin Wire-to-Board | .25" | TE Connectivity RoHS : Compliant |
| 496 | ||
| 66579-7 | TE Connectivity | TYPE VI PIN,MULTI-MATE Contact Mating Area Plating Material: Gold (Au) Contact Type: Pin Wire Contact Termination Area Plating Material: Tin Wire Size: 18 – 16 AWG Operating Voltage: 250 VAC Gold (Au) Pin Tin 18 – 16 AWG | TE Connectivity RoHS : Compliant |
| 274 | ||
![]() Vyrian | 6657S-1-502 | Bourns Inc | Potentiometer, Conductive Plastic, 1.5W, 5000ohm, 10% +/-Tol, 500ppm/Cel, 1 Turn(s) RoHS : Compliant | 12,418 | ||
| LT6657AHMS8-5-TRPBF | Analog Devices Inc | 12,056 | ||||
| LT6657AHMS8-1.25#PBF | Analog Devices Inc | Three Terminal Voltage Reference, 1 Output, 1.25V, PDSO8 RoHS : Compliant | 11,476 | |||
| TMS320C6657SGZHA8 | Texas Instruments | Digital Signal Processor, 16-Ext Bit, CMOS, PBGA625 | 9,522 | |||
| MAX6657MSA+T | Analog Devices Inc | Serial Switch/Digital Sensor, 11 Bit(s), 1Cel, BICMOS, Rectangular, 8 Pin, Surface Mount RoHS : Compliant | 8,412 | |||
| 1986657 | Phoenix Contact | Terminal Block Accessory, Jumper, Copper RoHS : Compliant | 7,710 | |||
| LT6657BHMS8-2.5#TRPBF | Analog Devices Inc | Three Terminal Voltage Reference, 1 Output, 2.5V, PDSO8 RoHS : Compliant | 7,155 | |||
| 2956657 | Phoenix Contact | Terminal Block Accessory, Base Element RoHS : Compliant | 6,652 | |||
TMS320C6657CZHA25![]() | Texas Instruments | Digital Signal Processor, 32-Bit Size, 16-Ext Bit, CMOS, PBGA625 RoHS : Compliant | 6,509 | |||
| 54AC16657WD | Texas Instruments | Bus Transceiver, AC Series, 2-Func, 8-Bit, True Output, CMOS, CDFP56 RoHS : Not Compliant | 6,172 | |||
| SYN6657 | Kingston Technology Company | 6,077 | ||||
| TMS320C6657GZH8 | Texas Instruments | Digital Signal Processor, 16-Ext Bit, CMOS, PBGA625 | 5,527 | |||
TMS320C6657GZHA![]() | Texas Instruments | Digital Signal Processor, 32-Bit Size, 16-Ext Bit, CMOS, PBGA625 RoHS : Not Compliant | 4,930 | |||
| 926657-6 | TE Connectivity | Board Connector, 6 Contact(s), 1 Row(s), Female, Crimp Terminal, Black Insulator, Receptacle RoHS : Compliant | 3,961 | |||
TMS320C6657CZH![]() | Texas Instruments | Digital Signal Processor, 32-Bit Size, 16-Ext Bit, CMOS, PBGA625 RoHS : Compliant | 3,410 | |||
![]() Win Source Electronics | XRP6657IHBTR-F![]() | Exar Corporation | 1.5A 1.3MHz Synchronous Step Down Converter | IC REG BUCK ADJUSTABLE 1.5A 6DFN RoHS : Compliant |
| 11,697 | |
AD6657BBCZ![]() | Analog Devices Inc | Quad IF Receiver | IC IF RCVR 11BIT 200MSPS 144BGA RoHS : Compliant |
| 9,568 | ||
| LT6657BHMS8-5#PBF | Analog Devices Inc | IC VREF SERIES 0.1% 8MSOP RoHS : Compliant |
| 7,450 | ||
TMS320C6657GZHA![]() | Texas Instruments | IC DSP FIX/FLOAT POINT 625FCBGA / DSP Fixed-Point/Floating-Point 16bit 1GHz 8000MIPS 625-Pin FCBGA Tray RoHS : Not Compliant |
| 1,595 | ||
AD6657BBCZRL![]() | Analog Devices Inc | IC IF RCVR 11BIT 200MSPS 144BGA / RF IC IF Receiver CDMA, LTE, W-CDMA, WiMAX 0Hz ~ 800MHz 144-CSPBGA (10x10) RoHS : Compliant |
| 1,000 | ||
TMS320C6657CZHA![]() | Texas Instruments | Fixed and Floating-Point Digital Signal Processor RoHS : Compliant |
| 600 | ||
TMS320C6657CZH![]() | Texas Instruments | Fixed and Floating-Point Digital Signal Processor | IC DSP FIX/FLOAT POINT 625FCBGA RoHS : Compliant |
| 149 | ||
TMS320C6657CZH8![]() | Texas Instruments | IC DSP FIX/FLOAT POINT 625FCBGA / DSP Fixed-Point/Floating-Point 16bit 850MHz 6800MIPS 625-Pin FCBGA Tray RoHS : Compliant |
| 149 | ||
TMS320C6657CZHA25![]() | Texas Instruments | IC DSP FIX/FLOAT POINT 625FCBGA / Fixed and Floating-Point Digital Signal Processor RoHS : Compliant |
| 140 | ||
TMS320C6657CZH25![]() | Texas Instruments | IC DSP FIX/FLOAT POINT 625FCBGA / DSP Fixed-Point/Floating-Point 16bit 1.25GHz 10000MIPS 625-Pin FCBGA Tray RoHS : Compliant |
| 100 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |