 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
6484 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | 6648405-1 | TE Connectivity | Contact SKT Crimp ST Cable Mount Strip - Bag (Alt: 6648405-1) RoHS : Compliant |
| 10 | |
| PAN6484-H01 | Amphenol Corporation | - Bulk (Alt: PAN6484H01) RoHS : Not Compliant | 0 | |||
| 2648440000 | Weidmüller Interface GmbH & Co. KG | CH 5.08/06/90F 3.9SN GN BX - Bulk (Alt: 2648440000) RoHS : Not Compliant |
| 0 | ||
| PAN6484-L3K | Amphenol Corporation | - Bulk (Alt: PAN6484L3K) RoHS : Not Compliant | 0 | |||
| 1-2176648-4 | TE Connectivity | MELF SMA-Q 1K69 1% 50PPM 0102 0.3W - Tape and Reel (Alt: 1-2176648-4) RoHS : Not Compliant |
| 0 | ||
| 1648466-1 | TE Connectivity | - Bag (Alt: 1648466-1) RoHS : Compliant |
| 0 | ||
| 1986484-6 | TE Connectivity | - Bag (Alt: 1986484-6) RoHS : Compliant |
| 0 | ||
| B66484GX197 | TDK Corporation | - Trays (Alt: B66484G0000X197) RoHS : Compliant |
| 0 | ||
| 4-2176648-4 | TE Connectivity | MELF SMA-Q 3K48 1% 50PPM 0102 0.3W - Tape and Reel (Alt: 4-2176648-4) RoHS : Not Compliant |
| 0 | ||
| PAN6484-F5 | Amphenol Corporation | - Bulk (Alt: PAN6484F5) RoHS : Not Compliant | 0 | |||
| 1N6484-E3/96 | Vishay Intertechnologies | 1A,1000V,STD,SUPERECT.MELF - Tape and Reel (Alt: 1N6484-E3/96) RoHS : Compliant |
| 0 | ||
| 1648470-1 | TE Connectivity | - Bag (Alt: 1648470-1) RoHS : Compliant |
| 0 | ||
| D0006484 | VPG Foil Resistors | Resistor 20Ohm 0.05% 4-Pin Through Hole - Bulk (Alt: D0006484) RoHS : Not Compliant |
| 0 | ||
| B66484W500D192 | TDK Corporation | - Trays (Alt: B66484W0500D192) RoHS : Compliant |
| 0 | ||
| 646484-7 | TE Connectivity | - Bulk (Alt: 646484-7) RoHS : Compliant |
| 0 | ||
 Newark | B66484G0000X149 | TDK Corporation | Core Transformer, N49, Er25/6/15; |Tdk B66484G0000X149 RoHS : Compliant |
| 1,160 | |
LMC6484IN/NOPB | Texas Instruments | Op Amp, Texas Instruments Lmc6484In/Nopb; |Texas Instruments LMC6484IN/NOPB RoHS : Compliant |
| 611 | ||
| MP016484 | SPC Multicomp | Rf Adapter, Bnc Plug-Uhf Plug, 50 Ohm; |Multicomp Pro MP016484 RoHS : Compliant |
| 244 | ||
| MAL225648472E3 | Vishay Intertechnologies | Cap, Alu Elec, 4700Uf, 63V, Snap-In; Capacitance:4700Μf; Voltage(Dc):63V; Voltage(Ac):-; Capacitance Tolerance:± 20%; Capacitor Terminals:Snap-In; Lifetime @ Temperature:2000 Hours @ 105°C; Polarity:Polar; Product Diameter:30Mm Rohs Compliant: Yes RoHS : Compliant |
| 168 | ||
MCP6484-E/SL | Microchip Technology Inc | Op Amp, Quad, 5Mhz, 2.7V/Us, 14 Soic; |Microchip Technology MCP6484-E/SL RoHS : Compliant |
| 165 | ||
| MAL225648472E3 | Vishay Intertechnologies | Cap, 4700?f, 63V, Alu Elec, Snap-In; |Vishay MAL225648472E3 RoHS : Compliant |
| 134 | ||
| B33-136-484 | Brady Worldwide Inc | Adhesive Cable Management Accessories; |Brady B33-136-484 RoHS : Not Compliant |
| 12 | ||
| MP006484 | SPC Multicomp | |Multicomp Pro MP006484 RoHS : Compliant |
| 7 | ||
| 09020006484 | HARTING Technology Group | Heavy Duty Contact, Socket, Crimp, 2A; Product Range:Din 41612 Series; Contact Gender:Socket; Wire Size Awg Max:20Awg; Contact Termination Type:Crimp; Current Rating:2A; Contact Material:Copper Alloy Rohs Compliant: Yes |Harting 09020006484 RoHS : Compliant |
| 2 | ||
| FMSW6484 | Fairview Microwave Inc | Transfer Electromechanical Relay Latchin; |Fairview Microwave FMSW6484 RoHS : Compliant |
| 1 | ||
| 6484 | Volex Group | Retractile Cord 3 Conductor 16Awg 2Ft; Cable Shielding:Unshielded; No. Of Conductors:3Conductor; Wire Gauge:16Awg; Conductor Area Csa:-; Reel Length (Imperial):2Ft; Reel Length (Metric):0.61M; Jacket Color:Black; Conductor Material:-Rohs Compliant: Yes RoHS : Compliant |
| 0 | ||
| 6484 | Festo | Pressure Sensor, Relative, 0-8Bar; |Festo 6484 RoHS : Compliant |
| 0 | ||
| LMC6484IMX/NOPB | Texas Instruments | Op Amp Texas Instruments Lmc6484Imx/Nopb; |Texas Instruments LMC6484IMX/NOPB RoHS : Compliant |
| 0 | ||
| 116-93-648-41-007000 | Mill-Max Mfg Corp | Standrd Solder Tail Dip Socket/Tube; |Mill-Max 116-93-648-41-007000 RoHS : Not Compliant |
| 0 | ||
| 121-11-648-41-001000 | Mill-Max Mfg Corp | Standard Wire Wrap Dip Socket/Tube; |Mill-Max 121-11-648-41-001000 RoHS : Not Compliant |
| 0 | ||
 RS | 82_MMCX-50-0-1/111_NH (22648469) | HUBER+SUHNER | RF CONNECTOR, MMCX STRAIGHT PCB JACK(F) |
| 50 | |
| 11_BNC-50-2-16/133_NH (22648466) | HUBER+SUHNER | RF CONNECTORS / COAXIAL CONNECTORS BNC STRAIGHT CABLE PLUG(M) |
| 50 | ||
| PE-1/8-1N-SW (6484) | Festo | PE CONVERTER, PNEU-ELEC PRESSURE TRANSDUCER, ON 2 BAR, OFF .5 BAR, G 1/8, 1N |
| 27 | ||
| 36484 | Wiha Quality Tools | TORX SOFT GRIP T-HANDLE T27X150MM |
| 10 | ||
| GRLA-10-32-UNF-QB-1/4-U (564842) | Festo | FLOW CONTROL VALVE, ONE WAY, 10-32 UNF TO 1/4 TUBE, PBT JOINT, GR SERIES |
| 5 | ||
| KXTCRHEBW (1SDA066484R1) | ABB Low Voltage Products and Systems | BASE FOR ADJUSTABLE DEPTH ROTARY HANDLEFOR WITHDRAWABLE CIRCUIT-BREAKER XT2-XT4 |
| 4 | ||
| NJ10-F-N (106484) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR, NAMUR, 106484 |
| 2 | ||
| TM18VP6FF100IRQ8 (86484) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, FIXED FIELD, 100MM, 10-30VDC, PNP, QD, TM18 |
| 2 | ||
| LFR-1/4-D-MIDI-A (186484) | Festo | FILTER REGULATOR, AIR, G1/4, 40 MIC, GAUGE, AUTO DRAIN, 2000L/MIN, 2-12 BAR |
| 2 | ||
| 606484 | RS Pro | DIAGONAL CABLE CUTTER 0.04" (1MM) CUTTING CAPACITY 5.24"(133MM) LENGTH |
| 1 | ||
| BI10-G30SK-AP6X2 (4648410) | TURCK Inc | PROXIMITY SENSOR M30 X 1.5 10 TO 30 VDC 200 MA (MAX.) SHIELDED |
| 1 | ||
| 2456484 (25530572) (CAI203105000-050RS) | RS Pro | 5/16-18 X 5 IN CARRIAGE BOLT, GRADE 2, ZINC PLATED, COARSE |
| 1 | ||
| 64840 (67064840) | Dichtomatik | OIL SEAL, 165MM ID, 200MM OD, 15MM WIDTH |
| 0 | ||
| CB-3648-40 (CB364840) | Isostatic Industries Inc | SLEEVE BEARING, CB-3648-40 2-1/4 X 3 X 5IN, 660/932 CAST BRONZE |
| 0 | ||
| SS-3648-40 (SS364840) | Isostatic Industries Inc | SLEEVE BEARING, SS-3648-40 1.129 X 1.504 X 2-1/2IN, POWDERED METAL BRONZE |
| 0 | ||
 Microchip Technology Inc | MCP6484-E/SL | Microchip Technology Inc | 4.5 MHz Low Power, Low IBias Quad Op Amp, SOIC, Projected EOL: 2041-05-30 RoHS : Compliant |
| 5,643 | |
| MCP6484-E/ST | Microchip Technology Inc | 4.5 MHz Low Power, Low IBias Quad Op Amp, TSSOP, Projected EOL: 2041-05-30 RoHS : Compliant |
| 4,512 | ||
| MCP6484T-E/SL | Microchip Technology Inc | 4.5 MHz Low Power, Low IBias Quad Op Amp, SOIC, Projected EOL: 2041-05-30 RoHS : Compliant |
| 0 | ||
| MCP6484T-E/ST | Microchip Technology Inc | 4.5 MHz Low Power, Low IBias Quad Op Amp, TSSOP, Projected EOL: 2041-05-30 RoHS : Compliant |
| 0 | ||
| MCP6484T-E/STVAO | Microchip Technology Inc | 4.5 MHz Low Power, Low IBias Quad Op Amp, TSSOP, Projected EOL: 2046-04-05 RoHS : Compliant |
| 0 | ||
 Bisco Industries | 1648-440-AL | RAF Electronic Hardware | 7,900 | |||
| 006-4844-00-0-990 | Staffall | 268 | ||||
| 110-83-648-41-530000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 195 | |||
| KS648-49TG | Advanced Interconnect | 50 | ||||
| FC1648-440-AL | Fascomp electronic hardware | 35 | ||||
| 110-99-648-41-361000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 32 | |||
| 115-93-648-41-003000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 24 | |||
| 117-93-648-41-005000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 22 | |||
| 110-99-648-41-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 10 | |||
| MS51964-84 | SESCO Industries Inc | 3 | ||||
| 111-93-648-41-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 3 | |||
| MS27648-49 | RBC Bearings Incorporated | 2 | ||||
| 110-93-648-41-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 2 | |||
 Onlinecomponents.com | 6484 | Volex Group | 16/3 SJOW RUBBER 24IN RETR RoHS : Compliant |
| 0 | |
| C115288-6484 | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| 80-6104-6484-6 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
 Rochester Electronics | TMS320TCI6484CCMHV | Texas Instruments | TMS320, Digital Signal Processors for Communications Infrasctructure RoHS : Compliant |
| 3,529 | |
MAX6484BL33BD3 | Maxim Integrated Products | IC VOLT REG Fixed 1 REG 3.3V 300mA 6-BGA T/R RoHS : Not Compliant |
| 1,491 | ||
| LM26484SQE/NOPB | National Semiconductor Corporation | Specialized Power Management Digital Cores 24-QFN T/R RoHS : Compliant |
| 14,936 | ||
 Sager | 116-93-648-41-007000 | Mill-Max Mfg Corp | IC & Component Sockets 48 PIN ELEVATED SKT .402L RoHS : Not Compliant | 0 | ||
| 121-11-648-41-001000 | Mill-Max Mfg Corp | IC & Component Sockets DIP Dual In Line Socket | 0 | |||
| 1-2176484-7 | TE Connectivity | RA73F 2A 8K66 0.1% 5K RL RoHS : Compliant |
| 0 | ||
| 5-2176484-1 | TE Connectivity | RA73F 2A 19K6 0.1% 5K RL RoHS : Compliant |
| 0 | ||
| ME1-X-01-648-4-A32-A-C | Carling Technologies | Circuit Breakers CIRCUIT BREAKER | 0 | |||
| 209-1-1-66-4-8-42 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
0026484111 | Molex | Headers & Wire Housings KK 156 Hdr Assy Flat Bkwy 11 ckt Tin RoHS : Compliant | 0 | |||
| 1-2176648-4 | TE Connectivity | MELF SMA-Q 1K69 1% 50PPM 0102 0.3W RoHS : Compliant |
| 0 | ||
| 1648466-1 | TE Connectivity | Heavy Duty Power Connectors 765-15-0080A HSG,SKT,MOD A RoHS : Compliant |
| 0 | ||
| 1666484 | Phoenix Contact | SAC-5P-M12MS/ 5 0-186/M12FS |
| 0 | ||
| 124-43-648-41-002000 | Mill-Max Mfg Corp | IC & Component Sockets 48P DIP SKT 4 LEVEL WRAPOST RoHS : Compliant | 0 | |||
| 127-93-648-41-002000 | Mill-Max Mfg Corp | IC & Component Sockets 48P DIP SKT 2 LEVEL WRAPOST RoHS : Not Compliant | 0 | |||
| 115-91-648-41-003000 | Mill-Max Mfg Corp | IC & Component Sockets DIP Dual In Line Socket RoHS : Not Compliant | 0 | |||
| 1986484-6 | TE Connectivity | Pluggable Terminal Blocks FrtStyle Trm Blk Plg 5.08mm 6 POS RoHS : Compliant |
| 0 | ||
| 0026484081 | Molex | Headers & Wire Housings KK 156 Hdr Assy Flat Bkwy 08 ckt Tin |
| 0 | ||
 TME | 826648-4 | TE Connectivity | Connector: pin strips; male; data; PIN: 4; soldering,THT; Inom: 5A RoHS : Compliant |
| 10,450 | |
| 1-2364846-1 | TE Connectivity | Connector: wire-wire; female; Automotive; for cable; orange RoHS : Compliant |
| 2,070 | ||
| 1648464-1 | TE Connectivity | Connector: wire-wire; plug; Automotive; Urated: 125V; PIN: 5 RoHS : Compliant |
| 250 | ||
| 096484E | FATH | T-nut; for profiles; Width of the groove: 6mm; stainless steel |
| 47 | ||
| 6484B | SOLID TOOLS | Knife; universal; 25mm; BLACK TIGER |
| 14 | ||
| 2764849 | Phoenix Contact | Enclosure base; EG 45; green; UL94HB; for DIN rail mounting; ABS RoHS : Compliant |
| 10 | ||
| 2964848 | Gedore Torque Ltd | Wrench: adjustable; Jaw capacity: 48mm; steel; Pliers len: 350mm |
| 0 | ||
| 1648430000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; female; power supply; 16A RoHS : Compliant |
| 0 | ||
| 2648480000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; power supply; CH; 15A; 630V |
| 0 | ||
| 1446484 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 8A; 320V RoHS : Compliant |
| 0 | ||
| 2648470000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; power supply; CH; 15A; 630V |
| 0 | ||
| 381166484 | Lapp Group | Connector: M23; industrial |
| 0 | ||
| 5-1879648-4 | TE Connectivity | Resistor: thin film; 127Ω; THT; 1W; ±0.5%; Ø3.7x10mm; axial; L: 10mm RoHS : Compliant |
| 0 | ||
| 0026484 | Lapp Group | Wire: control cable; ÖLFLEX® FD CLASSIC 810 CP; 5G6mm2; grey RoHS : Compliant |
| 0 | ||
| 1879648-4 | TE Connectivity | Resistor: thin film; 11.5Ω; THT; 1W; ±0.5%; Ø3.7x10mm; axial; L: 10mm RoHS : Compliant |
| 0 | ||
 ComSIT USA | LMC6484AIMNOPB | AVAILABLE EU | 250 | |||
ComSIT USA | AD6484JST | Analog Devices Inc | Electronic Component RoHS : Not Compliant | 2,325 | ||
LMC6484IMX | National Semiconductor Corporation | CMOS QUAD RAIL-TO-RAIL INPUT AND OUTPUT OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 750uV Offset-Max, CMOS, PDSO14 RoHS : Not Compliant | 370 | |||
| LMC6484AIM | National Semiconductor Corporation | CMOS QUAD RAIL-TO-RAIL INPUT AND OUTPUT OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 750uV Offset-Max, CMOS, PDSO14 RoHS : Not Compliant | 315 | |||
| LMC6484IMXNOPB | National Semiconductor Corporation | Quad CMOS operational amplifier, 3V-15V, NSC RoHS : Compliant | 221 | |||
| LMC6484INNOPB | National Semiconductor Corporation | CMOS QUAD RAIL-TO-RAIL INPUT AND OUTPUT OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 750uV Offset-Max, CMOS, PDIP14 RoHS : Compliant | 66 | |||
| LMC6484IMNOPB | National Semiconductor Corporation | Operational Amplifier, 4 Func, 750uV Offset-Max, CMOS, PDSO14 RoHS : Compliant | 51 | |||
 Interstate Connecting Components | 5617648-4 | TE Connectivity | NAVSEA DRAWING D-150-1005CS821 , 427114N001 |
| 107 | |
| 1648463-1 | TE Connectivity | 765-12-0080C=TA HSG,PIN,MOD C RoHS : Compliant |
| 3 | ||
| 1-2176484-7 | TE Connectivity | RA73F 2A 8K66 0.1% 5K RL RoHS : Compliant | 0 | |||
| 5-1879648-4 | TE Connectivity | H4P 127R 0.5% 100PPM RoHS : Compliant |
| 0 | ||
| 5-2176484-1 | TE Connectivity | RA73F 2A 19K6 0.1% 5K RL RoHS : Compliant |
| 0 | ||
| 1-2176648-4 | TE Connectivity | MELF SMA-Q 1K69 1% 50PPM 0102 RoHS : Compliant | 0 | |||
| 1648466-1 | TE Connectivity | 765-15-0080A=HSG,SKT,MOD A RoHS : Compliant |
| 0 | ||
| 1986484-6 | TE Connectivity | Plug 5.08mm Gn Ss WE same side 6p RoHS : Compliant |
| 0 | ||
| 2CMA166484R1000 | Amphenol Sine Systems | 316P11W INDUSTRIAL PLUG | 0 | |||
| 4-2176484-9 | TE Connectivity | RA73F 2A 18K7 0.1% 5K RL RoHS : Compliant |
| 0 | ||
| 2-2176484-4 | TE Connectivity | RA73F 2A 10K2 0.1% 5K RL RoHS : Compliant | 0 | |||
| 4-2176648-4 | TE Connectivity | MELF SMA-Q 3K48 1% 50PPM 0102 RoHS : Compliant | 0 | |||
| PAN6484C1 | Amphenol PCD | CONNECTOR |
| 0 | ||
| 1648470-1 | TE Connectivity | 765-19-0080E RoHS : Compliant |
| 0 | ||
| 1-2176484-1 | TE Connectivity | RA73F 2A 7K5 0.1% 5K RL RoHS : Compliant |
| 0 | ||
 PEI Genesis | 10-564843-201 | Amphenol Corporation |
| 2,699 | ||
| C10-564846-11FL | Amphenol Corporation |
| 0 | |||
| C10-564846-22FL | Amphenol Corporation |
| 0 | |||
| C10-564846-14FL | Amphenol Corporation |
| 0 | |||
| C10-564846-20FL | Amphenol Corporation |
| 0 | |||
| 10-564846-11FL | Amphenol Corporation |
| 0 | |||
| 10-564846-16FL | Amphenol Corporation |
| 0 | |||
| C10-564846-24FL | Amphenol Corporation |
| 0 | |||
| C10-564846-18FL | Amphenol Corporation |
| 0 | |||
| 12596484 | SOURIAU-SUNBANK |
| 0 | |||
| 10-564846-40G | Amphenol Corporation |
| 0 | |||
| PAN6484-C3 | Amphenol Corporation |
| 0 | |||
| 10-564846-243 | Amphenol Corporation |
| 0 | |||
 Powell Electronics | 646484-5 | TE Connectivity | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 4,763 | |
| EC6484-000 | TE Connectivity | Labels and Industrial Warning Signs RoHS : Compliant |
| 3,630 | ||
| 1-2364846-2 | TE Connectivity | Electronic Component RoHS : Compliant |
| 1,960 | ||
| 6648418-1 | TE Connectivity | Power Connectors RoHS : Compliant |
| 705 | ||
| 2364846-3 | TE Connectivity | TE COMPONENT (REF 2364846-3) RoHS : Compliant |
| 261 | ||
| 5617648-4 | TE Connectivity | Devices Miscellaneous |
| 222 | ||
| 1648464-1 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 165 | ||
| 1648473-1 | TE Connectivity | TE COMPONENT (REF 1648473-1) RoHS : Compliant |
| 129 | ||
| C10-564846-28FL | Amphenol Corporation | Connector |
| 34 | ||
| 202648-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 34 | ||
| 6648405-1 | TE Connectivity | Power Connectors RoHS : Compliant |
| 20 | ||
| 1648461-1 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 20 | ||
| 6648419-1 | TE Connectivity | Power Connectors RoHS : Compliant |
| 7 | ||
| AP4896-4848-G-C | Altech Corporation | Plastic Adaptor Plate |
| 3 | ||
| 816484-SF | TE Connectivity | Connectors RoHS : Compliant |
| 2 | ||
 Richardson RFPD | 22648487 | HUBER+SUHNER | PROTECTIVE CAP, BNC, Jack (Female) RoHS : Compliant |
| 75 | |
| 11016484-00 | TE Connectivity | GOLD METALIZED CHIP THERMISTOR, 100 5% RoHS : Not Compliant | 0 | |||
| SI5335C-B06484-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 350MHz-OUT 24-P RoHS : Compliant | 0 | |||
| 22648490 | HUBER+SUHNER | Conn Coaxial 0Hz to 11GHz 50Ohm Solder ST Cable Mo RoHS : Compliant |
| 0 | ||
| SI5335C-B06484-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 350MHz-OUT 24-P RoHS : Compliant | 0 | |||
| 22648469 | HUBER+SUHNER | Conn MMCX 0Hz to 6GHz 50Ohm Solder ST Thru-Hole F RoHS : Compliant | 0 | |||
| 126484 | Wakefield-Vette | HEAT PIPE RoHS : Compliant |
| 0 | ||
| R164844000W | Radiall | Connector Accessories Female Cap With Cord Straigh | 0 | |||
 Chip 1 Exchange | 826648-4 | TE Connectivity | INSTOCK RoHS : Compliant | 15,626 | ||
| 2648420000- | Weidmüller Interface GmbH & Co. KG | INSTOCK | 12,350 | |||
| 646484-5 | TE Connectivity | INSTOCK RoHS : Compliant | 11,169 | |||
| 2648440000- | Weidmüller Interface GmbH & Co. KG | INSTOCK | 10,296 | |||
| 816484-SF | TE Connectivity | INSTOCK RoHS : Compliant | 2,340 | |||
| LMC6484AIMX | INSTOCK | 1,396 | ||||
| 6648418-1 | TE Connectivity | INSTOCK RoHS : Compliant | 1,388 | |||
| LMC6484IMX/NOPB | National Semiconductor Corporation | INSTOCK RoHS : Compliant | 748 | |||
| LMC6484 | INSTOCK | 405 | ||||
| 964848-1 | INSTOCK | 140 | ||||
| LMC6484IM | INSTOCK | 97 | ||||
| LMC6484AIMNOPB | Texas Instruments | INSTOCK | 78 | |||
| LMC6484AIM | INSTOCK | 70 | ||||
| CDM-M6 4.8/42 | INSTOCK | 8 | ||||
| LMC6484AIM | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 3 | |||
 Avnet Abacus | 1706484 | Phoenix Contact | MKDS 3 3B508 GNYE MKDS33B508GNYE (Alt: 1706484) RoHS : Compliant | 0 | ||
| 646484-7 | TE Connectivity | (Alt: 646484-7) RoHS : Compliant | 0 | |||
| 1648466-1 | TE Connectivity | Conn Housing RCP 3 POS 883mm Crimp ST (Alt: 1648466-1) RoHS : Compliant | 0 | |||
| 1648466-1 | TE Connectivity | Conn Housing RCP 3 POS 883mm Crimp ST (Alt: 1648466-1) RoHS : Compliant | 0 | |||
| 1986484-6 | TE Connectivity | (Alt: 1986484-6) RoHS : Compliant | 0 | |||
| 1648463-1 | TE Connectivity | (Alt: 1648463-1) RoHS : Compliant | 0 | |||
| 1648463-1 | TE Connectivity | (Alt: 1648463-1) RoHS : Compliant | 0 | |||
| 6648493-1 | TE Connectivity | (Alt: 6648493-1) RoHS : Compliant | 0 | |||
| 1648470-1 | TE Connectivity | (Alt: 1648470-1) RoHS : Compliant | 0 | |||
| 6648407-1 | TE Connectivity | (Alt: 6648407-1) RoHS : Compliant | 0 | |||
| 56484-444LF | Amphenol Corporation | Conn Mini PLCC Socket SKT 44 POS 127mm Solder ST SMD TR (Alt: 56484-444LF) RoHS : Compliant | 0 | |||
| B66484W500D192 | TDK Corporation | (Alt: B66484W0500D192) RoHS : Compliant | 0 | |||
| B66484G X197 | TDK Corporation | ER25615 N97 4100 25 25 (Alt: B66484G0000X197) RoHS : Not Compliant | 0 | |||
| 114-83-648-41-117101 | PRECI-DIP SSA | Conn DIP Socket SKT 48 POS 254mm Solder RA SMD Card Box (Alt: 114-83-648-41-117101) RoHS : Compliant | 0 | |||
| 114-87-648-41-117101 | PRECI-DIP SSA | Conn DIP Socket SKT 48 POS 254mm Solder RA SMD Card Box (Alt: 114-87-648-41-117101) RoHS : Compliant | 0 | |||
Avnet Asia | 1N6484-E3/96 | Vishay Intertechnologies | 1A,1000V,STD,SUPERECT.MELF (Alt: 1N6484-E3/96) RoHS : Compliant | 0 | ||
| 1986484-3 | TE Connectivity | (Alt: 1986484-3) RoHS : Compliant | 0 | |||
| EC6484-000 | TE Connectivity | (Alt: EC6484-000) RoHS : Compliant | 0 | |||
| 6648434-1 | TE Connectivity | Contact SKT Crimp ST Cable Mount Strip (Alt: 6648434-1) RoHS : Compliant | 0 | |||
 Avnet Silica | MCP6484-E/SL | Microchip Technology Inc | OP Amp Quad GP RR IO 55V 14Pin SOIC Tube (Alt: MCP6484-E/SL) RoHS : Compliant | 0 | ||
| MCP6484-E/ST | Microchip Technology Inc | (Alt: MCP6484-E/ST) RoHS : Compliant | 0 | |||
| MCP6484T-E/ST | Microchip Technology Inc | OP Amp Quad GP RR IO 55V 14Pin TSSOP TR (Alt: MCP6484T-E/ST) RoHS : Compliant | 0 | |||
| MCP6484T-E/SL | Microchip Technology Inc | OP Amp Quad GP RR IO 55V 14Pin SOIC TR (Alt: MCP6484T-E/SL) RoHS : Compliant | 0 | |||
| DTR0000006484 (ALS) | Sanmina Corporation | (Alt: DTR0000006484) RoHS : Not Compliant | 0 | |||
 Component Electronics, Inc | 6648474-1 | TE Connectivity | IN STOCK SHIP TODAY |
| 337 | |
| 6648445-1 | TE Connectivity | IN STOCK SHIP TODAY |
| 150 | ||
| LMC6484AIM/NOPB | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 87 | ||
| 646484-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| LMC6484AIMX | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 40 | ||
| LMC6484AIM | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 30 | ||
| LMC6484AIM/NOPB | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| 123-93-648-41-001 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4 | ||
| 123-93-648-41-001000 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4 | ||
| 202648-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
 DB Roberts | 1648-440-SS | RAF Electronic Hardware | 0 | |||
| 20046484 | Essentra Components | 0 | ||||
| 2648-440-A | RAF Electronic Hardware | 0 | ||||
| 1648-440-AL | RAF Electronic Hardware | ROUND FEMALE STANDOFFS 3/16 RD X 1-3/16 LENGTH | 0 | |||
| S6484 | Heyco | SUNBUNDLER 4 100/BAG | 0 | |||
| 496484 | Essentra Components | 0 | ||||
 EBV Elektronik | 1N6484-E3/96 | Vishay Intertechnologies | 1A1000VSTDSUPERECTMELF (Alt: 1N6484-E3/96) RoHS : Compliant | 6,000 | ||
| MCP6484-E/SL | Microchip Technology Inc | OP Amp Quad GP RR IO 55V 14Pin SOIC Tube (Alt: MCP6484-E/SL) RoHS : Compliant | 0 | |||
| MCP6484-E/ST | Microchip Technology Inc | (Alt: MCP6484-E/ST) RoHS : Compliant | 0 | |||
| 1N6484-E3/97 | Vishay Intertechnologies | 1A1000VSTDSUPERECTMELF (Alt: 1N6484-E3/97) RoHS : Compliant | 0 | |||
| MCP6484T-E/ST | Microchip Technology Inc | OP Amp Quad GP RR IO 55V 14Pin TSSOP TR (Alt: MCP6484T-E/ST) RoHS : Compliant | 0 | |||
 Maritex | LMC6484AIMX/NOPB | Texas Instruments | Operational Amplifiers; LMC6484AIMX/NOPB; TEXAS INSTRUMENTS; 110 �V; 14; 15.5 V; 4 RoHS : Compliant |
| 1,584 | |
| LMC6484IMX/NOPB | Texas Instruments | Operational Amplifiers; LMC6484IMX/NOPB; TEXAS INSTRUMENTS; 110 �V; 14; 15.5 V; 4 RoHS : Compliant |
| 733 | ||
 Master Electronics | 1-2176484-7 | TE Connectivity | RA73F 2A 8K66 0.1% 5K RL MOQ Reduction RoHS : Compliant |
| 0 | |
| 5-1879648-4 | TE Connectivity | H4P 127R 0.5% 100PPM RoHS : Compliant |
| 0 | ||
| 5-2176484-1 | TE Connectivity | RA73F 2A 19K6 0.1% 5K RL MOQ Reduction RoHS : Compliant |
| 0 | ||
| 000648420 | ITT Interconnect Solutions | Backshell with A style clamp bushing wire sealing grommet compression ring. RoHS : Compliant |
| 0 | ||
| 000648440 | ITT Interconnect Solutions | Conn Circular F 19 POS Crimp ST Cable Mount 19 Terminal 1 Port Automotive RoHS : Not Compliant |
| 0 | ||
| 155648-4207 | ITT Interconnect Solutions | Connector Miniature Circular PIN 85 Position Solder Cup Straight Cable Mount 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 1-2176648-4 | TE Connectivity | MELF SMA-Q 1K69 1% 50PPM 0102 0.3W RoHS : Compliant |
| 0 | ||
| 1648466-1 | TE Connectivity | Conn Housing RCP 3 POS 8.83mm Crimp ST MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1666484 | Phoenix Contact | SAC-5P-M12MS/ 5 0-186/M12FS RoHS : Compliant |
| 0 | ||
| 1986484-6 | TE Connectivity | Plug 5.08mm Gn Ss & WE same side 6p MOQ Reduction RoHS : Compliant |
| 0 | ||
| 4-2176484-9 | TE Connectivity | RA73F 2A 18K7 0.1% 5K RL MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2-2176484-4 | TE Connectivity | RA73F 2A 10K2 0.1% 5K RL MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1726484 | Phoenix Contact | SACC-M12MRD-4PL SH ETH RoHS : Compliant |
| 0 | ||
| 1648445 | Phoenix Contact | HEAVYCON terminal adapter - pin insert - B16 series - 16-pos. - for the left side of the control cabinet - push-in connection RoHS : Compliant |
| 0 | ||
| 1648463-1 | TE Connectivity | Conn Housing PL 20 POS ST MOQ Reduction RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C6484 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX001, RF Cable Type: PE-SR047LL, RF Cable Impedance: 50 Ohm. 1.85mm Male to 1.85mm Male Low Loss Cable Using 047 Coax., Radio frequency assembly 1.85mm male to 1.85mm male low loss cable using 047 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 1.85mm male to 1.85mm male low loss cable using 047 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our low loss 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE3C6484, can also be known as a low loss 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE3C6484 is built with PE-SR047LL which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 70 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male low loss cable using 047 coax. | 129 | ||
| PE3C6484-6CM | Pasternack Enterprises |
| 23 | |||
| PE3C6484-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX001, RF Cable Type: PE-SR047LL, RF Cable Impedance: 50 Ohm, Length: 6 inches. 1.85mm Male to 1.85mm Male Low Loss Cable 6 Inch Length Using 047 Coax., Radio frequency assembly 1.85mm male to 1.85mm male low loss cable 6 inch length using 047 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 1.85mm male to 1.85mm male low loss cable 6 inch length using 047 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our low loss 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE3C6484-6, can also be known as a low loss 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE3C6484-6 is built with PE-SR047LL which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 70 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male low loss cable 6 inch length using 047 coax. |
| 20 | ||
| PE3C6484-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX001, RF Cable Type: PE-SR047LL, RF Cable Impedance: 50 Ohm, Length: 12 inches. 1.85mm Male to 1.85mm Male Low Loss Cable 12 Inch Length Using 047 Coax., Radio frequency assembly 1.85mm male to 1.85mm male low loss cable 12 inch length using 047 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 1.85mm male to 1.85mm male low loss cable 12 inch length using 047 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our low loss 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE3C6484-12, can also be known as a low loss 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE3C6484-12 is built with PE-SR047LL which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 70 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male low loss cable 12 inch length using 047 coax. |
| 20 | ||
| PE3C6484-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX001, RF Cable Type: PE-SR047LL, RF Cable Impedance: 50 Ohm, Length: 18 inches. 1.85mm Male to 1.85mm Male Low Loss Cable 18 Inch Length Using 047 Coax., Radio frequency assembly 1.85mm male to 1.85mm male low loss cable 18 inch length using 047 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 1.85mm male to 1.85mm male low loss cable 18 inch length using 047 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our low loss 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE3C6484-18, can also be known as a low loss 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE3C6484-18 is built with PE-SR047LL which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 70 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male low loss cable 18 inch length using 047 coax. |
| 20 | ||
| PE3C6484-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX001, RF Cable Type: PE-SR047LL, RF Cable Impedance: 50 Ohm, Length: 24 inches. 1.85mm Male to 1.85mm Male Low Loss Cable 24 Inch Length Using 047 Coax., Radio frequency assembly 1.85mm male to 1.85mm male low loss cable 24 inch length using 047 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 1.85mm male to 1.85mm male low loss cable 24 inch length using 047 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our low loss 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE3C6484-24, can also be known as a low loss 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE3C6484-24 is built with PE-SR047LL which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 70 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male low loss cable 24 inch length using 047 coax. |
| 18 | ||
| PE3C6484-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX001, RF Cable Type: PE-SR047LL, RF Cable Impedance: 50 Ohm, Length: 36 inches. 1.85mm Male to 1.85mm Male Low Loss Cable 36 Inch Length Using 047 Coax., Radio frequency assembly 1.85mm male to 1.85mm male low loss cable 36 inch length using 047 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 1.85mm male to 1.85mm male low loss cable 36 inch length using 047 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our low loss 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE3C6484-36, can also be known as a low loss 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE3C6484-36 is built with PE-SR047LL which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 70 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male low loss cable 36 inch length using 047 coax. |
| 12 | ||
| PE3C6484-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX001, RF Cable Type: PE-SR047LL, RF Cable Impedance: 50 Ohm, Length: 48 inches. 1.85mm Male to 1.85mm Male Low Loss Cable 48 Inch Length Using 047 Coax., Radio frequency assembly 1.85mm male to 1.85mm male low loss cable 48 inch length using 047 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 1.85mm male to 1.85mm male low loss cable 48 inch length using 047 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our low loss 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE3C6484-48, can also be known as a low loss 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE3C6484-48 is built with PE-SR047LL which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 70 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male low loss cable 48 inch length using 047 coax. |
| 9 | ||
| PE3C6484-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX001, RF Cable Type: PE-SR047LL, RF Cable Impedance: 50 Ohm, Length: 60 inches. 1.85mm Male to 1.85mm Male Low Loss Cable 60 Inch Length Using 047 Coax., Radio frequency assembly 1.85mm male to 1.85mm male low loss cable 60 inch length using 047 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 1.85mm male to 1.85mm male low loss cable 60 inch length using 047 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our low loss 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE3C6484-60, can also be known as a low loss 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE3C6484-60 is built with PE-SR047LL which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 70 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male low loss cable 60 inch length using 047 coax. |
| 7 | ||
| PE71S6484 | Pasternack Enterprises | Key Specifications, Connector Series: 2.92mm, Connector Gender: Female, Switch Design: Transfer, Minimum Frequency: DC, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Maximum Input Power (CW): 5 Watts, Maximum VSWR: 1.8:1, Maximum Insertion Loss: 1 dB, Minimum Isolation: 50 dB. Transfer Electromechanical Relay Latching Switch, DC to 40 GHz, 5W, 12V, Self Cut Off, TTL, 2.92 mm. PE71S6484 electromechanical RF relay switch from Pasternack is a transfer switch design with latching actuator. Our transfer electromechanical RF latching switch uses 2.92 mm connectors at 50 Ohms. This 2.92 mm RF relay transfer switch has a maximum frequency of 40 GHz and maximum power of 5 W. The Pasternack radio frequency transfer 2.92 mm electromechanical relay switch is rated at a control voltage of 12V and switching speed of 20ms. 2.92 mm transfer electromechanical RF relay latching switch features Self Cut-Off, TTL Logic with an isolation minimum of 50 dB. Transfer electromechanical relay radio frequency latching switch PE71S6484 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our transfer 2.92 mm coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts. |
| 4 | ||
| PE3W06484/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. Mini UHF Male to N Male Cable Using LMR-195-FR Coax with HeatShrink. PE3W06484/HS is a Mini UHF male to N male cable using LMR-195-FR coax. This Pasternack Mini UHF male to N male cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm N for connector 2. Our male Mini UHF to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06484/HS Mini UHF male to N male cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W10648-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male to TNC Female Right Angle Bulkhead Low Loss Cable 48 Inch Length Using LMR-200 Coax., Radio frequency assembly TNC male to TNC female right angle bulkhead low loss cable 48 inch length using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female right angle bulkhead low loss cable 48 inch length using LMR-200 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a right angle TNC bulkhead cable connection on the other. Our low loss TNC to right angle TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W10648-48 can also be known as a low loss TNC plug to right angle TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10648-48 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our TNC male to right angle bulkhead TNC female cable has a maximum VSWR of 1.4:1. TNC plug to TNC jack cable assembly PE3W10648-48 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W10648-48 can also be used in the other direction and will be a right angle TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC right angle jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W16484 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female 2 Hole Flange Cable Using PE-SR402FLJ Coax. PE3W16484 is a SMA male to SMA female 2 hole flange cable using PE-SR402FLJ coax. This Pasternack SMA male to SMA female 2 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA 2 hole flange cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W16484 SMA male to SMA female 2 hole flange cable assembly is constructed with PE-SR402FLJ coax. | 0 | |||
| PE3W02648-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Female Bulkhead to N Female Bulkhead Cable 48 Inch Length Using RG214 Coax., Radio frequency assembly N female bulkhead to N female bulkhead cable 48 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to N female bulkhead cable 48 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a type N bulkhead cable connection on the other. Our type N to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W02648-48 can also be known as a type N jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (LD) dielectric type. This cable assembly employs durable and flexible materials, and with a 3.228-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02648-48 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -25 to 70 degrees C. The flexible RF cable has an in-series connection. Our bulkhead type N female to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N jack to type N jack cable assembly PE3W02648-48 is built with RG214 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. Type N jack bulkhead to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 0 | ||
 Vyrian | 2764849 | Phoenix Contact | Terminal Block Accessory, Housing, Polycarbonate RoHS : Compliant | 12,908 | ||
| 1648458 | Phoenix Contact | Rectangular Connector RoHS : Compliant | 11,741 | |||
| 1648445 | Phoenix Contact | Rectangular Connector RoHS : Compliant | 11,060 | |||
| 66564-840LF | Amphenol Communications Solutions | Board Connector, 40 Contact(s), 2 Row(s), Female, IDC Terminal | 10,756 | |||
| 1648461 | Phoenix Contact | Rectangular Connector RoHS : Compliant | 9,080 | |||
| TMS320TCI6484GMH2 | Texas Instruments | Digital Signal Processor, 64-Ext Bit, 1200MHz, CMOS, PBGA688 | 9,010 | |||
| 1648490 | Phoenix Contact | Rectangular Connector RoHS : Compliant | 8,333 | |||
LMC6484AIN | Texas Instruments | Operational Amplifier, 4 Func, 1350uV Offset-Max, CMOS, PDIP14 RoHS : Not Compliant | 7,933 | |||
| 1648416 | Phoenix Contact | Rectangular Connector RoHS : Compliant | 7,886 | |||
LM26484SQX | Texas Instruments | Power Supply Support Circuit, Adjustable, 1 Channel RoHS : Compliant | 6,527 | |||
| F648418GFNR | Texas Instruments | 6,523 | ||||
| LMC6484AMWGMLS | Texas Instruments | Operational Amplifier, 4 Func, 3000uV Offset-Max, CMOS, CDSO14 RoHS : Not Compliant | 6,153 | |||
| 1706484 | Phoenix Contact | Barrier Strip Terminal Block, 24A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,733 | |||
| LMC6484AIMX | Texas Instruments | Operational Amplifier, 4 Func, 750uV Offset-Max, CMOS, PDSO14 RoHS : Not Compliant | 5,456 | |||
| TMS320TCI6484GMH | Texas Instruments | Digital Signal Processor, 64-Ext Bit, 1000MHz, CMOS, PBGA688 RoHS : Not Compliant | 5,042 | |||
 Win Source Electronics | LMC6484AIM | Texas Instruments | IC OPAMP GP 1.5MHZ RRO 14SOIC RoHS : Not Compliant |
| 20,320 | |
| LMC6484AIMX | Texas Instruments | IC OPAMP GP 1.5MHZ RRO 14SOIC RoHS : Not Compliant |
| 19,470 | ||
| LMC6484AIMX/NOPB | Texas Instruments | IC OPAMP GP 1.5MHZ RRO 14SOIC RoHS : Compliant |
| 19,140 | ||
| LMC6484AIM/NOPB | Texas Instruments | CMOS Quad Rail-to-Rail Input and Output Operational Amplifier | IC OPAMP GP 4 CIRCUIT 14SOIC RoHS : Compliant |
| 18,860 | ||
| LMC6484IM | Texas Instruments | IC OPAMP GP 1.5MHZ RRO 14SOIC RoHS : Not Compliant |
| 10,000 | ||
| LMC6484IM/NOPB | Texas Instruments | CMOS Quad Rail-to-Rail Input and Output Operational Amplifier RoHS : Compliant |
| 9,440 | ||
| LMC6484IMX | Texas Instruments | LMC6484 CMOS Quad Rail-to-Rail Input and Output Operational Amplifier | IC OPAMP GP 4 CIRCUIT 14SOIC RoHS : Not Compliant |
| 9,420 | ||
| LMC6484IMX/NOPB | Texas Instruments | Op Amp Quad Precision Amplifier R-R I/O 15.5V 14-Pin SOIC T/R / IC OPAMP GP 1.5MHZ RRO 14SOIC RoHS : Compliant |
| 9,350 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand