| Electronic Components Datasheet Search |
|
6481 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Verical | 648101-000 | TE Connectivity | Shielded Twisted Pair Cable 2Conductors 22AWG 3.43mm 600VAC White Package RoHS : Compliant |
| 30 | |
| 6481 | Pomona Electronics | Test Lead Accessory RoHS : Not Applicable |
| 1 | ||
![]() Avnet Americas | 26-48-1035 | Molex | Pin Header, 3 Contacts, 1 Row, 3.96mm, Matte Tin, 5A, Straight, Partially Shrouded, Brass, THT, PET - Bulk (Alt: 0026481035) RoHS : Compliant |
| 45,500 | |
| 26-48-1025 | Molex | Pin Header, 2 Contacts, 1 Row, 3.96mm, Tin, 7A, Straight, Partially Shrouded, Brass, Wire-to-Board - Bulk (Alt: 0026481025) RoHS : Compliant |
| 21,466 | ||
| 26-48-1085 | Molex | Pin Header, 8 Contacts, 1 Row, 3.96mm, Matte Tin, 5A, Straight, Partially Shrouded, Brass, THT, PET - Bulk (Alt: 0026481085) RoHS : Compliant |
| 10,800 | ||
| 26-48-1081 | Molex | Pin Header, 8 Contacts, 1 Row, 3.96mm, Tin, 7A, Straight, Partially Shrouded, Brass, THT, PET - Bulk (Alt: 0026481081) RoHS : Compliant |
| 671 | ||
| 86094648114765V1LF | Amphenol Corporation | - Trays (Alt: 86094648114765V1LF) RoHS : Compliant |
| 354 | ||
| 86094648114755V1LF | Amphenol Corporation | - Trays (Alt: 86094648114755V1LF) RoHS : Compliant |
| 352 | ||
| CCG6-48-12DF | TDK Corporation | - Bulk (Alt: CCG6-48-12DF) RoHS : Not Compliant |
| 20 | ||
| CCG6-48-15DR | TDK Corporation | - Bulk (Alt: CCG6-48-15DR) RoHS : Not Compliant |
| 20 | ||
| CCG6-48-15SF | TDK Corporation | - Bulk (Alt: CCG6-48-15SF) RoHS : Not Compliant |
| 20 | ||
| CCG6-48-12SR | TDK Corporation | - Bulk (Alt: CCG6-48-12SR) RoHS : Not Compliant |
| 20 | ||
| CCG6-48-12DR | TDK Corporation | - Bulk (Alt: CCG6-48-12DR) RoHS : Not Compliant |
| 20 | ||
| CCG6-48-15DF | TDK Corporation | - Bulk (Alt: CCG6-48-15DF) RoHS : Not Compliant |
| 20 | ||
| CCG6-48-15SR | TDK Corporation | - Bulk (Alt: CCG6-48-15SR) RoHS : Not Compliant |
| 20 | ||
| RM422-164-811-9100 | Molex | Connector, Receptacle, 164 Contacts, 4 Rows, 1.91 mm, Gold, Beryllium Copper, Brass, Through Hole - Bulk (Alt: RM422-164-811-9100) RoHS : Compliant |
| 5 | ||
| 1N6481-E3/97 | Vishay Intertechnologies | 1A,400V,STD,SUPERECT.MELF - Tape and Reel (Alt: 1N6481-E3/97) RoHS : Compliant |
| 0 | ||
![]() Newark | 26-48-1036 | Molex | Connector, Header, 3Pos, 1Rows, 3.96Mm; Connector Systems:Power; Pitch Spacing:3.96Mm; No. Of Rows:1Rows; No. Of Contacts:3Contacts; Contact Termination Type:Through Hole Right Angle; Product Range:Kk 396 41672 Series Rohs Compliant: Yes |Molex 26-48-1036 RoHS : Compliant |
| 1,757 | |
| 648106131822 | Wurth Elektronik | Conn, R/A Header, 6Pos, 1Row, 1.5Mm; |Würth Elektronik 648106131822 RoHS : Compliant |
| 1,032 | ||
| 648110131822 | Wurth Elektronik | Conn, R/A Header, 10Pos, 1Row, 1.5Mm; |Würth Elektronik 648110131822 RoHS : Compliant |
| 860 | ||
| 26-48-1055 | Molex | Connector, Header, 5Pos, 1Row, 3.96Mm; |Molex 26-48-1055 (Alternate Part Number: 800753586505 RoHS : Compliant |
| 754 | ||
| 26-48-1031 | Molex | Board-Board Connector Header, 3 Position, 1Row; Connector Systems:Board-To-Board; Pitch Spacing:3.96Mm; No. Of Rows:1Rows; No. Of Contacts:3Contacts; Contact Termination Type:Through Hole Straight; Product Range:Kk 41661 Series Rohs Compliant: Yes RoHS : Compliant |
| 670 | ||
| MP016481 | SPC Multicomp | Rf Adapter, Tnc Plug-Uhf Jack, 50 Ohm; |Multicomp Pro MP016481 RoHS : Compliant |
| 235 | ||
| 26-48-1071 | Molex | Breakaway Header, 7 Contact, .156 In. Pi; Available Until Stocks Are Exhausted Alternative Available |Molex 26-48-1071 RoHS : Compliant |
| 112 | ||
| 26-48-1085 | Molex | Connector, Header, 8Pos, 1Row, 3.96Mm; |Molex 26-48-1085 (Alternate Part Number: 800753586550 RoHS : Compliant |
| 92 | ||
| 648105131822 | Wurth Elektronik | Connector, Header, 5Pos, 1Row, 1.5Mm; |Würth Elektronik 648105131822 RoHS : Compliant |
| 21 | ||
| 6481 | Pomona Electronics | Test Lead Kit, 18 Piece; |Pomona 6481 RoHS : Compliant |
| 13 | ||
| 6481 | Pomona Electronics | Test Lead Kit; |Pomona 6481 RoHS : Compliant |
| 7 | ||
| 26-48-1081 | Molex | Connector, Header, 8Pos, 1Row, 3.96Mm; |Molex 26-48-1081 RoHS : Compliant |
| 7 | ||
| TMDC 06-4811 | Traco Power | Dc-Dc Converter, 5.1V, 1.2A; Power Supply Applications:Ite; Dc/Dc Converter Type:Module; Input Ratio:4:1; Output Power Max:6W; No. Of Outputs:1 Output; Output Voltage - Output 1:5.1V; Output Current - Output 1:1.2A; Width:34Mm Rohs Compliant: Yes RoHS : Compliant |
| 6 | ||
| MGS64812 | Cosel USA Inc | Dc-Dc Converter, 12V, 0.5A; |Cosel MGS64812 RoHS : Compliant |
| 4 | ||
| 26-48-1101 | Molex | Header Connector, Pcb Mount, Recept, 10; |Molex 26-48-1101 RoHS : Compliant |
| 2 | ||
![]() RS | 26-48-1025 (A-41671-C02A197) | Molex | HEADERS VERT B/A HDR 2P TIN FRICTION LOCK |
| 1,455 | |
| 26-48-1035 (A-41671-C03A197) | Molex | HEADERS VERT B/A HDR 3P TIN FRICTION LOCK |
| 233 | ||
| 26-48-1241 (A-41661-A24A197) | Molex | 24WAY STANDARD STRAIGHT BREAKAWAY HEADER |
| 193 | ||
| 26-48-1055 (A-41671-C05A197) | Molex | KK 396 BREAKAWAY HEADER, SQ. PIN, FRICTION LOCK, 5 CIRCUIT, TIN PLATING |
| 74 | ||
| 4648-1032-SS | RAF Electronic Hardware | STANDOFF, HEX, STAINLESS STEEL, MALE/FEMALE, 10-32, 2" (50.8 MM) |
| 26 | ||
| 26-48-1085 (A-41671-C08A197) | Molex | HEADERS VERT B/A HDR 8P TIN FRICTION LOCK |
| 24 | ||
| 1648115 (HC-B 6-I-UT-M) | Phoenix Contact | CONNECTOR INSERT MALE 6 WAY 16A 500 V B6 SERIES |
| 17 | ||
| 40608G (F216481) | Mersen Electrical Power | FUSE BLOCK, CLASS G,3 POLE,480V,60A, ALUMINUM BOX CONNECTOR |
| 9 | ||
| 1648160 (HC-B 6-I-CT-F) | Phoenix Contact | RECTANGULAR CONNECTOR;INSERT WITHOUT CONTACTS;600V;13A;6+GROUND POS;CRIMP |
| 4 | ||
| TMDC 06-4811 | Traco Power | 6W DC/DC CONVERTER ISOLATED, REGULATED IN A CHASSIS MOUNT PLASTIC CASE |
| 3 | ||
| 6481 (1780535) | Pomona Electronics | TEST CONNECTOR ADAPTER SET, MODULAR TEST LEADS, RETRACTABLE SHEATH, BLACK & RED |
| 3 | ||
| 64-811 | GC Electronics | SINGLE OUTLET SURGE 270 J |
| 2 | ||
| QBY-1/4T-5/32-U (564819) | Festo | CONNECTOR, PUSH-IN Y, QBY-1/4T-5/32-U |
| 2 | ||
| VABM-B10-20S-N14-6-P3 (576481) | Festo | MANIFOLD BLOCK, VABM-B10-20S-N14-6-P3 |
| 2 | ||
| 6ES76481AA302YA0 | Siemens | BOOK MOUNTING KIT |
| 1 | ||
![]() Microchip Technology Inc | MCP6481T-E/LTY | Microchip Technology Inc | MCP6481 5MHz Low IBias Low Power OP AMP, SC70, Projected EOL: 2041-10-11 RoHS : Compliant |
| 15,000 | |
| 1N648-1 | Microchip Technology Inc | Signal or Computer Diode _ DO-35, Projected EOL: 2049-02-05 RoHS : Compliant |
| 662 | ||
| MCP6481T-E/OT | Microchip Technology Inc | MCP6481 5MHz Low IBias Low Power OP AMP, SOT-23, Projected EOL: 2041-10-11 RoHS : Compliant |
| 0 | ||
| MCP6481T-E/OTVAO | Microchip Technology Inc | MCP6481 5MHz Low IBias Low Power OP AMP, SOT-23, Projected EOL: 2046-02-22 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 026-4810-00-0-252 | Staffall | 7,413 | |||
| 26-48-1026 | Molex | RoHS : Compliant | 220 | |||
| 26-48-1113 | Molex | RoHS : Compliant | 155 | |||
| 4648-1032-SS | RAF Electronic Hardware | 90 | ||||
| 26-48-1081 | Molex | RoHS : Compliant | 71 | |||
| 26-48-1031 | Molex | RoHS : Compliant | 40 | |||
| 4648-1224-S-28 | RAF Electronic Hardware | 35 | ||||
| 026-4810-000252 | Staffall | 25 | ||||
| 4648-1032-B | RAF Electronic Hardware | 25 | ||||
| 26-48-1101 | Molex | RoHS : Compliant | 17 | |||
| 11464812-5 | Superior Washer & Gasket Company | 15 | ||||
| 26-48-1045 | Molex | RoHS : Compliant | 7 | |||
| 006-4817-00-0-990 | Staffall | 5 | ||||
| 26-48-1185 | Molex | RoHS : Compliant | 5 | |||
| 26-48-1155 | Molex | RoHS : Compliant | 3 | |||
![]() Onlinecomponents.com | 6481 | Pomona Electronics | Test Connector Adapter Set RoHS : Compliant |
| 2 | |
| 6481 | Weller Hand Tools GmbH | RoHS : Compliant |
| 0 | ||
| 73135-6481 | Molex | MPRF Plug Gang 6 - Habia RG174 Cable - Black. RoHS : Compliant |
| 0 | ||
| 6481-G | Pomona Electronics | RoHS : Compliant |
| 0 | ||
| 45984-6481 | Molex | 1.27mm, 12.00mm Pitch, EXTreme LPHPower™ Receptacle Header, Right Angle, 6 Power Contacts, 40 Signal Contacts, Select Gold (Au) Plating, for 3.18mm Thick PC Board, with Guide Posts, with Press-fit Plastic Pegs RoHS : Compliant |
| 0 | ||
| 45985-6481 | Molex | 1.27mm, 12.00mm Pitch, EXTreme LPHPower™ Header, Right Angle, 6 Power Contacts, 40 Signal Contacts, Select Gold (Au) Plating, for 3.18mm Thick PC Board, with Guide Pockets, with Press-fit Plastic Pegs RoHS : Compliant |
| 0 | ||
| XC5E-6481-2 | Aratas Corporation | DIN Connector RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | SN74ALS648-1DW | Texas Instruments | Registered Bus Transceiver, ALS Series, 1-Func, 8-Bit, Inverted Output, TTL, PDSO24 RoHS : Not Compliant |
| 394 | |
| SN74ALS648-1NT | Texas Instruments | Registered Bus Transceiver, ALS Series, 1-Func, 8-Bit, Inverted Output, TTL, PDIP24 RoHS : Not Compliant |
| 3,124 | ||
5962-8764813QYA![]() | Cypress Semiconductor | Dual marked (27C512-200QMB) RoHS : Not Compliant |
| 192 | ||
5962-8764814QYA![]() | Cypress Semiconductor | EPROM - UV 512kbit 64k x 8 4.5V - 5.5V Parallel 250ns 32-LCC RoHS : Not Compliant |
| 21 | ||
MAX6481BL30BD4-T![]() | Maxim Integrated Products | IC VOLT REG Fixed 1 REG 3V 300mA 6-BGA T/R RoHS : Not Compliant |
| 5,000 | ||
| SKY77648-11 | Skyworks Solutions Inc | RF Amplifier 42-SMD RoHS : Compliant |
| 2,100 | ||
![]() Sager | 2-2176481-1 | TE Connectivity | RA73F 1J 9K53 0.1% 5K RL RoHS : Compliant |
| 0 | |
| 2176481-8 | TE Connectivity | RA73F 1J 6K98 0.1% 5K RL RoHS : Compliant |
| 0 | ||
| 1648133-1 | TE Connectivity | Heavy Duty Power Connectors 235-0163-01100=CONN SKT.SQR DWR RoHS : Compliant |
| 0 | ||
| 1852648-1 | TE Connectivity | Other Tools HDM SAPR062F077F LM (CUT) | 0 | |||
| 3-146481-1 | TE Connectivity | Headers & Wire Housings 31 MODII HDR SRST UNSHRD STKG RoHS : Not Compliant | 0 | |||
| 0026481085 | Molex | Headers & Wire Housings HDR VT 1X08P .156 450/172 SN RoHS : Compliant |
| 0 | ||
| 0026481166 | Molex | Headers & Wire Housings KK 156 Header Assy FrLk Break 16 Ckt Tin RoHS : Compliant |
| 0 | ||
0026481210![]() | Molex | Headers & Wire Housings KK 156 Hdr Assy Flat Bkwy 21 ckt Tin | 0 | |||
| REC6-4812SRW/R8/C | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 6W DC/DC 8kV REG 48Vin 12Vout RoHS : Compliant |
| 0 | ||
| REC6-4815SRW/R10/A | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 6W DC/DC 10kV REG 48Vin 15Vout RoHS : Compliant |
| 0 | ||
| REC6-4815SRW/R10/A/X1 | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 6W DC/DC 10kV REG 48Vin 15Vout RoHS : Compliant |
| 0 | ||
| REM6-4812DW/A | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 6W 18-75Vin +/-12Vout DIP24 RoHS : Compliant |
| 0 | ||
| CCG6-48-12DF | TDK-Lambda Corporation | Isolated DC/DC Converters - Through Hole 6W 48Vin 12Vout Dual DIP |
| 0 | ||
| SUTW64812 | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 6W 12V/24V 0.25A Through Hole RoHS : Compliant |
| 0 | ||
| 2-146481-8 | TE Connectivity | Headers & Wire Housings 28 MODII HDR SRST UNSHRD STKG RoHS : Not Compliant | 0 | |||
![]() TME | 26-48-1115 | Molex | Connector: wire-board; male; data; Inom: 7A; 250V; PIN: 11; shrouded RoHS : Compliant |
| 2,400 | |
| 26-48-1075 | Molex | Connector: wire-board; male; data; Inom: 7A; 250V; PIN: 7; shrouded RoHS : Compliant |
| 2,200 | ||
| 515-1064-812F | Dialight | Fiber for LED; rectangular; LEDs RoHS : Compliant |
| 500 | ||
| 26-48-1241 | Molex | Connector: wire-board; male; PIN: 24; straight; for cable; THT; 7A RoHS : Compliant |
| 85 | ||
| 6481 | SOLID TOOLS | Knife; universal; 18mm; BLACK TIGER |
| 25 | ||
| 6481 | Pomona Electronics | Test lead: kit; black,red; meter leads RoHS : Compliant |
| 0 | ||
| 0648101687 | Weidmüller Interface GmbH & Co. KG | Marker: cable; Marking: X; 3÷4mm; PVC; yellow; push-in; CLI O; H: 3mm RoHS : Compliant |
| 0 | ||
| 1446481 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 8A; 320V RoHS : Compliant |
| 0 | ||
| 2-1676481-0 | TE Connectivity | Resistor: thin film; 33Ω; SMD; 0603; 62.5mW; ±0.1%; -55÷155°C RoHS : Compliant |
| 0 | ||
| 2648170000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; power supply; CPS; 15A; 630V |
| 0 | ||
| 381166481 | Lapp Group | Connector: M23; industrial |
| 0 | ||
| 5-1676481-8 | TE Connectivity | Resistor: thin film; 1.5kΩ; SMD; 0603; 62.5mW; ±0.1%; -55÷155°C RoHS : Compliant |
| 0 | ||
| 5-1879648-1 | TE Connectivity | Resistor: thin film; 110Ω; THT; 1W; ±0.5%; Ø3.7x10mm; axial; L: 10mm RoHS : Compliant |
| 0 | ||
| 648-185-1 | IRIMO | Pliers: locking; Pliers len: 185mm; Jaw capacity: 41mm |
| 0 | ||
| 7-1676481-5 | TE Connectivity | Resistor: thin film; 8.2kΩ; SMD; 0603; 62.5mW; ±0.1%; -55÷155°C RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | 26481051 | Molex | AVAILABLE EU RoHS : Compliant | 5,894 | ||
| AB3X0086481B1C | CARLINGSWITCH INC | AVAILABLE EU | 443 | |||
![]() ComSIT USA | 1N6481E396 | Vishay Intertechnologies | SURFACE MOUNT GLASS PASSIVATED JUNCTION RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 1A, 400V V(RRM), Silicon, DO-213AB RoHS : Compliant | 12,000 | ||
| MCP6481TEOT | mct | Operational Amplifier, 1 Func, 1500uV Offset-Max, CMOS, PDSO5 RoHS : Compliant | 1,300 | |||
| M4A3964810VC | Lattice Semiconductor Corporation | HIGH PERFORMANCE E2CMOS IN-SYSTEM PROGRAMMABLE LOGIC EE PLD, 10ns, 96-Cell, CMOS, PQFP100 RoHS : Not Compliant | 180 | |||
| P0648104NLT | Pulse Electronics Corporation | Electronic Component RoHS : Compliant | 175 | |||
| TEN64813 | Traco Power | Analog Circuit RoHS : Not Compliant | 4 | |||
![]() Interstate Connecting Components | 26-48-1041 | Molex | 1X4 .156 TIN ST HDR RoHS : Compliant |
| 821 | |
| 26-48-1031 | Molex | 1X3 .156 TIN ST HDR RoHS : Compliant |
| 529 | ||
| 2-1676481-3 | TE Connectivity | CPF 0603 43R 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 2-2176481-1 | TE Connectivity | RA73F 1J 9K53 0.1% 5K RL RoHS : Compliant |
| 0 | ||
| 2176481-8 | TE Connectivity | RA73F 1J 6K98 0.1% 5K RL RoHS : Compliant |
| 0 | ||
| 1648133-1 | TE Connectivity | 235-0163-01100=CONN,SKT.SQR DW RoHS : Compliant |
| 0 | ||
| 1-1676481-7 | TE Connectivity | CPF 0603 24R 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 1-2176481-3 | TE Connectivity | RA73F 1J 7K87 0.1% 5K RL RoHS : Compliant |
| 0 | ||
| 1-2176481-9 | TE Connectivity | RA73F 1J 9K09 0.1% 5K RL RoHS : Compliant |
| 0 | ||
| 10206481-00 | TE Connectivity | PT5MA-60-N34-UP-420E-M6M RoHS : Not Compliant | 0 | |||
| 5-1676481-5 | TE Connectivity | CPF 0603 1K1 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 5-2176481-3 | TE Connectivity | RA73F 1J 20K5 0.1% 5K RL RoHS : Compliant |
| 0 | ||
| 1-1676481-8 | TE Connectivity | CPF 0603 27R 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 1-2176481-4 | TE Connectivity | RA73F 1J 8K06 0.1% 5K RL RoHS : Compliant |
| 0 | ||
| 8-1879648-1 | TE Connectivity | H4P 464R 0.5% 100PPM RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | 515-1064-810F | Dialight |
| 0 | ||
| SM-A-838464-81 | SOURIAU-SUNBANK |
| 0 | |||
| 10-584648-12S | Amphenol Corporation |
| 0 | |||
| 515-1064-811F | Dialight | RoHS : Compliant |
| 0 | ||
| 5617896-481 | SOURIAU-SUNBANK |
| 0 | |||
![]() PUI | 9001-16481C00A | 350 | ||||
![]() Richardson RFPD | REC6-4812SRW/R8/C | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 12V 0.5A 6W 9-Pin DIP Tub RoHS : Compliant |
| 0 | |
| REC6-4815SRW/R10/A | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 15V 0.4A 6W 6-Pin DIP Tub RoHS : Compliant |
| 0 | ||
| REC6-4815SRW/R10/A/X1 | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 15V 0.4A 6W 6-Pin DIP Tub RoHS : Compliant |
| 0 | ||
| REM6-4812DW/A | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT -12V/12V -0.25A/0.25A 6W RoHS : Compliant |
| 0 | ||
| REC6-4812DRW/R8/A/CTRL/X1 | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 12V/-12V 0.25A/-0.25A 6W RoHS : Compliant |
| 0 | ||
| REC6-4815DRW/R10/A/X1 | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 15V/-15V 0.2A/-0.2A 6W 6- RoHS : Compliant |
| 0 | ||
REM6-4812SW/A/CTRL![]() | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 12V 0.5A 6W Medical 7-Pin RoHS : Compliant |
| 0 | ||
| REM6-4815DW/A | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 15V/-15V 0.2A/-0.2A 6W Me RoHS : Compliant |
| 0 | ||
| T6481A1-N/3GT3G-.141-50 | Amphenol Corporation | Conn TNC 0Hz to 11GHz 50Ohm Solder ST Panel Mount RoHS : Compliant |
| 0 | ||
| REC6-4815DRW/R10/A | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 15V/-15V 0.2A/-0.2A 6W 6- RoHS : Compliant |
| 0 | ||
REM6-4815DW/A/CTRL![]() | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 15V/-15V 0.2A/-0.2A 6W Me RoHS : Compliant |
| 0 | ||
| REC6-4812SRW/R10/A | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 12V 0.5A 6W 6-Pin DIP Tub RoHS : Compliant |
| 0 | ||
| REC6-4815SRW/R8/A/X1 | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 15V 0.4A 6W 6-Pin DIP Tub RoHS : Compliant |
| 0 | ||
| REM6-4812SW/A | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 12V 0.5A 6W Medical 6-Pin RoHS : Compliant |
| 0 | ||
| REM6-4815DW/C | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 15V/-15V 0.2A/-0.2A 6W Me RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 501648-1000 | Molex | INSTOCK RoHS : Compliant | 374,400 | ||
| 2-1676481-3 | TE Connectivity | INSTOCK RoHS : Compliant | 97,500 | |||
| 26-48-1125 | Molex | INSTOCK RoHS : Compliant | 26,508 | |||
| 26-48-1061 | Molex | INSTOCK RoHS : Compliant | 22,280 | |||
| 26-48-1095 | Molex | INSTOCK RoHS : Compliant | 21,799 | |||
| 26-48-1085 | Molex | INSTOCK RoHS : Compliant | 17,843 | |||
| 26-48-1245 | Molex | INSTOCK RoHS : Compliant | 10,756 | |||
| 515-1064-813F | Dialight | INSTOCK RoHS : Compliant | 9,782 | |||
| 3-1703648-1 | TE Connectivity | INSTOCK RoHS : Compliant | 6,802 | |||
| 2141648-1 | TE Connectivity | INSTOCK RoHS : Compliant | 3,780 | |||
| SN74ALS6481NT | Texas Instruments | INSTOCK | 1,500 | |||
| SN74ALS648-1NT | INSTOCK | 1,019 | ||||
| 0026481085 | INSTOCK | 547 | ||||
| 0026481045 | INSTOCK | 489 | ||||
| 26481105 | INSTOCK | 326 | ||||
![]() Avnet Abacus | 26481025 | Molex | Pin Header Power 396 mm 1 Rows 2 Contacts Through Hole Straight (Alt: 26481025) RoHS : Compliant | 16,150 | ||
| 26481245 | Molex | (Alt: 26481245) RoHS : Compliant | 4,800 | |||
| 1577648-1 | TE Connectivity | (Alt: 1577648-1) RoHS : Compliant | 4,000 | |||
| 26481065 | Molex | Conn Unshrouded Header 6 POS 396mm Solder ST Through Hole (Alt: 26481065) RoHS : Compliant | 1,800 | |||
| 26481045 | Molex | Conn Unshrouded Header HDR 4 POS 396mm Solder ST ThruHole Bulk (Alt: 26481045) RoHS : Compliant | 1,150 | |||
| 86094648114755V1LF | Amphenol Corporation | Conn DIN 41612 Receptacle 64 POS 254mm Solder ST Through Hole Tray (Alt: 86094648114755V1LF) RoHS : Compliant | 1,040 | |||
| 1-1703648-1 | TE Connectivity | Automotive Connector Housing MCP Plug 7 Ways AMP MCP Series Tab Power Contacts (Alt: 1-1703648-1) RoHS : Compliant | 960 | |||
| 86094648124755V1LF | Amphenol Corporation | Conn DIN 41612 RCP 64 POS 254mm Solder ST ThruHole Tray (Alt: 86094648124755V1LF) RoHS : Compliant | 352 | |||
| 26481085 | Molex | (Alt: 26481085) RoHS : Compliant | 0 | |||
| 26481085 | Molex | (Alt: 26481085) RoHS : Compliant | 0 | |||
| 26481166 | Molex | Conn Unshrouded Header HDR 16 POS 396mm Solder RA ThruHole Bag (Alt: 26481166) RoHS : Compliant | 0 | |||
| 26481023 | Molex | (Alt: 26481023) RoHS : Compliant | 0 | |||
| 26481186 | Molex | (Alt: 26481186) RoHS : Compliant | 0 | |||
| 26481186 | Molex | (Alt: 26481186) RoHS : Compliant | 0 | |||
| 1648133-1 | TE Connectivity | (Alt: 1648133-1) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 0026481105 | Molex | Pin Header, 10 Contacts, 1 Row, 3.96mm, Tin, 7A, Straight, Partially Shrouded, Brass, Wire-to-Board (Alt: 0026481105) RoHS : Compliant | 0 | ||
| 0026481045 | Molex | Pin Header, 4 Contacts, 1 Row, 3.96mm, Tin, 7A, Straight, Partially Shrouded, Brass, Wire-to-Board (Alt: 0026481045) RoHS : Compliant | 0 | |||
| 86094648194755E3LF | Amphenol Corporation | (Alt: 86094648194755E3LF) RoHS : Compliant | 0 | |||
| 2486648-1 | TE Connectivity | (Alt: 2486648-1) RoHS : Compliant | 0 | |||
| 4-1437648-1 | TE Connectivity | (Alt: 4-1437648-1) RoHS : Compliant | 0 | |||
| 6-1437648-1 | TE Connectivity | (Alt: 6-1437648-1) RoHS : Compliant | 0 | |||
| 0026481231 | Molex | (Alt: 0026481231) RoHS : Compliant | 0 | |||
| EC6481-000 | TE Connectivity | (Alt: EC6481-000) RoHS : Compliant | 0 | |||
| 5-1676481-1 | TE Connectivity | (Alt: 5-1676481-1) RoHS : Compliant | 0 | |||
| 5016481000 | Molex | Terminal, Socket, Wire to Board Connector, Tin, Copper Alloy, Cable Mount, Straight, 501648 Series (Alt: 5016481000) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MCP6481T-E/OT | Microchip Technology Inc | OP Amp Single GP Comparator RR IO 55V 5Pin SOT23 TR (Alt: MCP6481T-E/OT) RoHS : Compliant | 0 | ||
| MCP6481T-E/LTY | Microchip Technology Inc | (Alt: MCP6481T-E/LTY) RoHS : Compliant | 0 | |||
| QF2.7648-1600/07 | Microchip Technology Inc | Crystal Filter 27648MHz 10C to 60C 4Pin GM116 (Alt: QF2.7648-1600/07) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | TG.64.8113 | Taoglas Antenna Solutions | WideBand (600-6000MHz) LTE Dipole Terminal Antenna with 90 Hinged R/A SMA(M) |
| 0 | |
![]() Component Electronics, Inc | 26-48-1016 | Molex | IN STOCK SHIP TODAY | 2,450 | ||
| 1648110-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,157 | ||
| 26-48-1026 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,510 | ||
| 0026481026 | Molex | IN STOCK SHIP TODAY |
| 1,510 | ||
| 0026481045 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 220 | ||
| 26-48-1045 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 220 | ||
| 3052-1648-10 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 170 | ||
| 26-48-1056 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 135 | ||
| 26-48-1111 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 100 | ||
| 26-48-1101 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 90 | ||
| 26-48-1166 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 63 | ||
| 26-48-1055 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 60 | ||
| 26-48-1032 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| 26-48-1126 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 22 | ||
| 26-48-1245 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 16 | ||
![]() DB Roberts | 4648-1032-AL | RAF Electronic Hardware | Hex Male-Female Standoffs 3/8 Hex X 2.00 Length | 0 | ||
| 4648-1032-A | RAF Electronic Hardware | 0 | ||||
| 47-10-648-11 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-10-648-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-80-648-11 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 4648-1224-S-28 | RAF Electronic Hardware | 0 | ||||
| 56-481-013 | Southco | 56-481-013 | 0 | |||
| 4648-1032-SS | RAF Electronic Hardware | 0 | ||||
| S6481 | Heyco | SSGS 1000-320 | 0 | |||
| 56-481-008 | Southco | 56-481-008 | 0 | |||
| 47-80-648-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 56-481-014 | Southco | 56-481-014 | 0 | |||
| 4648-1032-S | RAF Electronic Hardware | 0 | ||||
| 4648-1032-S-12 | RAF Electronic Hardware | 0 | ||||
| 4648-1032-AL-22 | RAF Electronic Hardware | STANDARD ALUMINUM MALE FEMALE STANDOFF | 0 | |||
![]() EBV Elektronik | ELUA3535NU3-P0010U5136481K0-V41G | Everlight Electronics Co Ltd | (Alt: H110005214) RoHS : Compliant | 1,600 | ||
| TG.64.8113 | Taoglas Antenna Solutions | WideBand 6006000MHz LTE Dipole Terminal Antenna with 90 Hinged RA SMAM (Alt: TG.64.8113) RoHS : Compliant | 0 | |||
| 1N6481-E3/96 | Vishay Intertechnologies | 1A400VSTDSUPERECTMELF (Alt: 1N6481-E3/96) RoHS : Compliant | 0 | |||
| MCP6481T-E/OT | Microchip Technology Inc | OP Amp Single GP Comparator RR IO 55V 5Pin SOT23 TR (Alt: MCP6481T-E/OT) RoHS : Compliant | 0 | |||
| MCP6481T-E/LTY | Microchip Technology Inc | (Alt: MCP6481T-E/LTY) RoHS : Compliant | 0 | |||
| FN16481_STELLA-G2-VSM | LEDIL | (Alt: FN16481_STELLA-G2-VSM) RoHS : Compliant | 0 | |||
![]() Master Electronics | 6481 | Pomona Electronics | Test Connector Adapter Set RoHS : Compliant |
| 2 | |
| 2-1676481-3 | TE Connectivity | CPF 0603 43R 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 2-2176481-1 | TE Connectivity | RA73F 1J 9K53 0.1% 5K RL MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2176481-8 | TE Connectivity | RA73F 1J 6K98 0.1% 5K RL MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1648133-1 | TE Connectivity | 235-0163-01100=CONN SKT.SQR DWR MOQ Reduction RoHS : Compliant |
| 0 | ||
| 26-48-1041 | Molex | Conn Unshrouded Header HDR 4 POS 3.96mm Solder ST Thru-Hole KK® Bag RoHS : Compliant |
| 0 | ||
| 26-48-1122 | Molex | Conn Unshrouded Header HDR 12 POS 3.96mm Solder RA Thru-Hole KK® Bag RoHS : Compliant |
| 0 | ||
| 26-48-1061 | Molex | Conn Unshrouded Header HDR 6 POS 3.96mm Solder ST Thru-Hole KK® Bag RoHS : Compliant |
| 0 | ||
| 1N648-1 | Microchip Technology Inc | Signal or Computer Diode RoHS : Compliant |
| 0 | ||
| 1-1676481-7 | TE Connectivity | Res Thin Film 0603 24 Ohm 0.1% 0.063W(1/16W) A±25ppm/A°C Pad SMD T/R RoHS : Compliant |
| 0 | ||
| 1-2176481-3 | TE Connectivity | RA73F 1J 7K87 0.1% 5K RL MOQ Reduction RoHS : Compliant |
| 0 | ||
| UMYA36481 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| 1-2176481-9 | TE Connectivity | RA73F 1J 9K09 0.1% 5K RL MOQ Reduction RoHS : Compliant |
| 0 | ||
| 155648-1008 | ITT Interconnect Solutions | Connector Circular Housing Socket 85 Position 17 Shell Size Olive Drab Cadmium Aluminum RoHS : Not Compliant |
| 0 | ||
| 10206481-00 | TE Connectivity | PT5MA-60-N34-UP-420E-M6M RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W06481/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. N Male to N Female Low Loss Cable Using LMR-240-DB Coax with HeatShrink., Radio frequency assembly N male to N female low loss cable using LMR-240-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable using LMR-240-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and female on end 2. PE3W06481/HS can also be known as a low loss type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3W06481/HS is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06481/HS can also be used in the other direction and will be type N female to N type male cable assembly if the opposite connectivity is required. Low loss N type plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female low loss cable using LMR-240-DB coax with heatshrink. | 4,610 | ||
| PE3W06481/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Female Low Loss Cable 60 Inch Length Using LMR-240-DB Coax with HeatShrink., Radio frequency assembly N male to N female low loss cable 60 inch length using LMR-240-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 60 inch length using LMR-240-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and female on end 2. PE3W06481/HS-60 can also be known as a low loss N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3W06481/HS-60 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this N type male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06481/HS-60 can also be used in the other direction and will be N type female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female low loss cable 60 inch length using LMR-240-DB coax with heatshrink. |
| 922 | ||
| PE3W06481/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Female Low Loss Cable 24 Inch Length Using LMR-240-DB Coax with HeatShrink., Radio frequency assembly N male to N female low loss cable 24 inch length using LMR-240-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 24 inch length using LMR-240-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and female on end 2. PE3W06481/HS-24 can also be known as a low loss N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3W06481/HS-24 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06481/HS-24 can also be used in the other direction and will be type N female to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female low loss cable 24 inch length using LMR-240-DB coax with heatshrink. |
| 922 | ||
| PE3W06481/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Female Low Loss Cable 48 Inch Length Using LMR-240-DB Coax with HeatShrink., Radio frequency assembly N male to N female low loss cable 48 inch length using LMR-240-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 48 inch length using LMR-240-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and female on end 2. PE3W06481/HS-48 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3W06481/HS-48 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06481/HS-48 can also be used in the other direction and will be type N female to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female low loss cable 48 inch length using LMR-240-DB coax with heatshrink. |
| 922 | ||
| PE3W06481/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Female Low Loss Cable 36 Inch Length Using LMR-240-DB Coax with HeatShrink., Radio frequency assembly N male to N female low loss cable 36 inch length using LMR-240-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 36 inch length using LMR-240-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and female on end 2. PE3W06481/HS-36 can also be known as a low loss type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3W06481/HS-36 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06481/HS-36 can also be used in the other direction and will be N type female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female low loss cable 36 inch length using LMR-240-DB coax with heatshrink. |
| 922 | ||
| PE3W06481/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Female Low Loss Cable 12 Inch Length Using LMR-240-DB Coax with HeatShrink., Radio frequency assembly N male to N female low loss cable 12 inch length using LMR-240-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 12 inch length using LMR-240-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and female on end 2. PE3W06481/HS-12 can also be known as a low loss type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3W06481/HS-12 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06481/HS-12 can also be used in the other direction and will be N type female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female low loss cable 12 inch length using LMR-240-DB coax with heatshrink. |
| 922 | ||
| PE71S6481 | Pasternack Enterprises | Key Specifications, Connector Series: 2.92mm, Connector Gender: Female, Switch Design: SPDT, Minimum Frequency: DC, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Maximum Input Power (CW): 10 Watts, Maximum VSWR: 1.5:1, Maximum Insertion Loss: 0.7 dB, Minimum Isolation: 60 dB. SPDT Electromechanical Relay Latching Switch, DC to 40 GHz, 10W, 28V, Self Cut Off, 2.92 mm. PE71S6481 electromechanical RF relay switch from Pasternack is a SPDT switch design with latching actuator. Our SPDT electromechanical RF latching switch uses 2.92 mm connectors at 50 Ohms. This 2.92 mm RF relay SPDT switch has a maximum frequency of 40 GHz and maximum power of 10 W. The Pasternack radio frequency SPDT 2.92 mm electromechanical relay switch is rated at a control voltage of 28V and switching speed of 20ms. 2.92 mm SPDT electromechanical RF relay latching switch features Self Cut-Off with an isolation minimum of 60 dB. SPDT electromechanical relay radio frequency latching switch PE71S6481 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our SPDT 2.92 mm coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts. |
| 2 | ||
| PE3C6481 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B100, RF Cable Type: PE-B100, RF Cable Impedance: 50 Ohm. MMCX Plug to SMA Male Cable Using PE-B100 Coax., Radio frequency assembly MMCX plug to SMA male cable using PE-B100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MMCX plug to SMA male cable using PE-B100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMCX cable connection on one end and SMA cable connection on the other. Our MMCX to SMA cable assemblies have a plug gender on end 1 and male on end 2. This MMCX to SMA cable is a plug to male coax assembly, PE3C6481, can also be known as a MMCX male to SMA plug cable assembly and will be shipped same-day as it is purchased. MMCX male to SMA plug cable assembly PE3C6481 is built with PE-B100 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency MMCX plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6481 can also be used in the other direction and will be SMA male to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMA cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug to SMA male cable using PE-B100 coax. | 0 | |||
| PE3W02648-108 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 108 inches. N Female Bulkhead to N Female Bulkhead Cable 108 Inch Length Using RG214 Coax., Radio frequency assembly N female bulkhead to N female bulkhead cable 108 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to N female bulkhead cable 108 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a type N bulkhead cable connection on the other. Our type N to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W02648-108 can also be known as a type N jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (LD) dielectric type. This cable assembly employs durable and flexible materials, and with a 3.228-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02648-108 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -25 to 70 degrees C. The flexible RF cable has an in-series connection. Our bulkhead type N female to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N jack to type N jack cable assembly PE3W02648-108 is built with RG214 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. Type N jack bulkhead to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W07648-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm, Length, Max: 12 inches. UHF Male to UHF Female Cable 12 Inch Length Using 53 Ohm RG55 Coax., Radio frequency assembly UHF male to UHF female cable 12 inch length using 53 Ohm RG55 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The UHF male to UHF female cable 12 inch length using 53 Ohm RG55 coax, UHF cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UHF to UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with UHF cable connection on one end and UHF cable connection on the other. Our UHF to UHF cable assemblies have a male gender on end 1 and female on end 2. PE3W07648-12 can also be known as a UHF plug to UHF jack cable assembly and will be shipped same-day as it is purchased. UHF plug to UHF jack cable assembly PE3W07648-12 is built with RG55 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this UHF male to UHF female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07648-12 can also be used in the other direction and will be UHF female to UHF male cable assembly if the opposite connectivity is required. UHF plug to UHF jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UHF male to UHF female cable 12 inch length using 53 Ohm RG55 coax. |
| 0 | ||
| PE3W02648-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female Bulkhead to N Female Bulkhead Cable 12 Inch Length Using RG214 Coax., Radio frequency assembly N female bulkhead to N female bulkhead cable 12 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to N female bulkhead cable 12 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a type N bulkhead cable connection on the other. Our type N to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W02648-12 can also be known as a type N jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (LD) dielectric type. This cable assembly employs durable and flexible materials, and with a 3.228-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02648-12 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -25 to 70 degrees C. The flexible RF cable has an in-series connection. Our bulkhead type N female to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N jack to type N jack cable assembly PE3W02648-12 is built with RG214 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. Type N jack bulkhead to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W16481LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. N Male to N Female Bulkhead Cable Using LMR-200 Coax, LF Solder. PE3W16481LF is a N male to N female bulkhead cable using LMR-200 coax. This Pasternack N male to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16481LF N male to N female bulkhead cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W16481 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. N Male to N Female Bulkhead Cable Using LMR-200 Coax. PE3W16481 is a N male to N female bulkhead cable using LMR-200 coax. This Pasternack N male to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16481 N male to N female bulkhead cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Vyrian | MAX6481BL20AD2 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 11,513 | ||
| MAX6481BL285AD1 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 10,700 | |||
| MAX6481BL27AD3 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 10,092 | |||
| MAX6481BL19AD4 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 9,236 | |||
| MAX6481BL27BD2 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 9,178 | |||
| MAX6481BL33BD1 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, 0.18V Dropout, BICMOS, PBGA6 RoHS : Not Compliant | 9,116 | |||
| MAX6481BL21BD4 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 8,490 | |||
| MAX6481BL19AD2 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 7,764 | |||
| MAX6481BL27BD4 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 7,499 | |||
| MAX6481BL25AD1 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, 0.25V Dropout, BICMOS, PBGA6 RoHS : Not Compliant | 7,343 | |||
| MAX6481BL16BD4 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 6,995 | |||
| MAX6481BL26AD4 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 5,900 | |||
| SN74ALS648-1JT4 | Texas Instruments | Registered Bus Transceiver, 1-Func, 8-Bit, Inverted Output, TTL, CDIP24 RoHS : Not Compliant | 5,773 | |||
| MAX6481BL32AD3 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 5,250 | |||
MAX6481BL25BD3-T![]() | Maxim Integrated Products | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, 0.25V Dropout, BICMOS, PBGA9 RoHS : Not Compliant | 641 | |||
![]() Win Source Electronics | 9001-16481C00A | Oupiin | DIN41612, FEMALE, HALF C TYPE, 4 / 48 Position Din Connector Receptacle, Female Sockets Gold Through Hole |
| 6,700 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |