| Electronic Components Datasheet Search |
|
6084 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 1658608-4 | TE Connectivity | Connector: D-Sub; PIN: 9; male; data transfer; for cable; straight RoHS : Compliant |
| 1,720 | |
| COIL0608-4.7 | FerroCore | Inductor: wire; THT; 4.7mH; Ioper: 160mA; R: 19.41Ω; ±10%; Ø7.5x9.5mm |
| 585 | ||
| 10060843 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 8; THT; 1.5A |
| 0 | ||
| 2176084-7 | TE Connectivity | Resistor: ceramic; 100Ω; THT; 7W; ±5%; Ø8.5x25mm; axial; L: 25mm RoHS : Compliant |
| 0 | ||
| 10026084 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; data; PIN: 8; SMT; 3A; 150V |
| 0 | ||
| 10060842 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 7; THT; 1.5A |
| 0 | ||
| 10160841 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 13; SMT; 3A; 100V |
| 0 | ||
| 2176084-6 | TE Connectivity | Resistor: ceramic; 68Ω; THT; 7W; ±5%; Ø8.5x25mm; axial; L: 25mm RoHS : Compliant |
| 0 | ||
| 2836084 | Gedore Torque Ltd | Wrench-set; 6-angles,rattle,socket spanner; 1/2"; 21pcs. |
| 0 | ||
| ARC6-16-08.4-LU-LD-2-1 | Samtec Inc | Cable; PIN: 50; 213.36mm; PVC; blue; gold-plated; 34AWG; 100Ω; 8.4" RoHS : Compliant |
| 0 | ||
| AHA0608470M035R | Kyocera AVX Components | Capacitor: hybrid; H: 8mm; 47uF; 35VDC; 1300mA; SMD; ESR: 60mΩ; AHA RoHS : Compliant |
| 0 | ||
| M20-9960846 | Harwin | Connector: pin strips; socket; male; data; Indess; 3A; PIN: 8; 2.54mm RoHS : Compliant |
| 0 | ||
| M20-8760842R | Harwin | Connector: pin strips; socket; male; data; Indess; 3A; PIN: 16; PA6T RoHS : Compliant |
| 0 | ||
| M20-9960845 | Harwin | Connector: pin strips; socket; male; data; Indess; 3A; PIN: 8; 2.54mm RoHS : Compliant |
| 0 | ||
LMC6084AIM/NOPB![]() | Texas Instruments | IC: operational amplifier; 1.3MHz; Ch: 4; 4.5÷15.5VDC; SO14; 0.8mV RoHS : Compliant |
| 0 | ||
![]() Verical | 60843-1 | TE Connectivity | Conn Commoning Bar 2 POS 4.95mm ST RoHS : Compliant |
| 30,000 | |
| 60842-1 | TE Connectivity | Conn Commoning Bar 3 POS 5.16mm ST RoHS : Compliant |
| 2,000 | ||
| 60842-1 | TE Connectivity | Conn Commoning Bar 3 POS 5.16mm ST RoHS : Compliant |
| 797 | ||
| 6084 | Pomona Electronics | Metal Wrist Straps with Clip and Cord, ESD, Strap Material Stainless Steel RoHS : Not Applicable |
| 36 | ||
| 6084 | Pomona Electronics | Metal Wrist Straps with Clip and Cord, ESD, Strap Material Stainless Steel RoHS : Not Applicable |
| 1 | ||
![]() Avnet Americas | F1C1-201608-4R7M | Bel Fuse | FIXED IND 4.7UH1.4A 290 MOHM - Tape and Reel (Alt: F1C1-201608-4R7M) RoHS : Compliant |
| 3,000 | |
| 1658608-4 | TE Connectivity | - Rail/Tube (Alt: 1658608-4) RoHS : Compliant |
| 1,150 | ||
| 15036-0840 | Molex | PREMO 0.5 FOR 225019 8IN 40CKT TYPE A - Bulk (Alt: 0150360840) RoHS : Compliant |
| 200 | ||
| AHA0608470M035R | Kyocera AVX Components | Hybrid Aluminium Electrolytic Capacitor, 47 uF, ? 20%, 35 V, Radial Can - SMD, 0.06 ohm - Tape and Reel (Alt: AHA0608470M035R) RoHS : Compliant |
| 0 | ||
| 10-766084-041A | Amphenol Corporation | - Bulk (Alt: 10-766084-041A) RoHS : Not Compliant |
| 0 | ||
| 10136656-0841LF | Amphenol Corporation | - Trays (Alt: 10136656-0841LF) RoHS : Not Compliant |
| 0 | ||
| 10137926-0844LF | Amphenol Corporation | - Tape and Reel (Alt: 10137926-0844LF) RoHS : Not Compliant |
| 0 | ||
| IRSM836-084MA | Infineon Technologies AG | 3-Phase AC Motor Driver 11.5V to 18.5V 36-Pin PQFN Tray - Trays (Alt: IRSM836-084MA) RoHS : Compliant | 0 | |||
| AEC0608470M050R | Kyocera AVX Components | ALUMINUM ELECTROLYTIC V-CH - Tape and Reel (Alt: AEC0608470M050R) RoHS : Compliant |
| 0 | ||
| 15166-0843 | Molex | FFC / FPC Board Connector, 15 Contacts, 0.5 mm, Tin, Premo-Flex 15166 Series - Bulk (Alt: 0151660843) RoHS : Compliant |
| 0 | ||
| 1060840000 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Block Plug 3 Power Position 7.62mm Straight Cable Mount Black Box - Bulk (Alt: 1060840000) RoHS : Not Compliant |
| 0 | ||
| CCF6084R5FKE36 | Vishay Intertechnologies | CCF-60 84.5 1% T-1 E36 e3 - Tape and Reel (Alt: CCF6084R5FKE36) RoHS : Compliant |
| 0 | ||
| PT8101-0060-841-2111 | TE Connectivity | - Bulk (Alt: 20009994-00) RoHS : Not Compliant |
| 0 | ||
| 62GB-776-08(416) | Amphenol Corporation | - Bulk (Alt: 62GB77608416) RoHS : Not Compliant |
| 0 | ||
| 15026-0840 | Molex | Ribbon Cable, 40 Conductors, 0.5mm, 203mm L, 500mA, 50V, Polyimide - Bulk (Alt: 0150260840) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | 6084BG | BOYD Laconia | Heat Sinks Channel Heat Sink for TO-220, TO-220-Single Gauge, Vertical, 8.38x13.21x19.05mm RoHS : Compliant |
| 7,241 | |
| SFR4-40X7/16 2701 100 DEG | APM HEXSEAL | Screws & Fasteners 4-40X7/16", Phillips Flat Head, 18-8 Stainless Steel with Silicone O-Ring, Seal Screw |
| 111 | ||
| 6084 | Keystone Electronics Corp | Test Plugs & Test Jacks RED NYLON BANANA RoHS : Compliant |
| 98 | ||
| 4080 | APM HEXSEAL | Switch Hardware RUBRGLAS SEAL-clear 11/16-32NS-2B THREAD RoHS : Compliant |
| 21 | ||
| 6084 | Pomona Electronics | Anti-Static Control Products STATIC CONTROL WRI RoHS : Compliant |
| 8 | ||
| 608-4 | Klein Tools Inc | Screwdrivers, Nut Drivers & Socket Drivers 1/8-Inch Cabinet Mini Screwdriver, 4-Inch Round Shank RoHS : Not Applicable |
| 0 | ||
| TCSD-16-D-20.00-01-F-N-D10 | Samtec Inc | Ribbon Cables / IDC Cables IDC Socket Cable Assemblies |
| 0 | ||
| 4082 | APM HEXSEAL | Switch Hardware RUBRGLAS SEAL-clear 11/16-32NS-2B THREAD RoHS : Compliant |
| 0 | ||
| 4086 | APM HEXSEAL | Switch Hardware RUBRGLAS SEAL-clear 7/8-32NS-2B THREAD RoHS : Compliant |
| 0 | ||
| 4080-3 | APM HEXSEAL | Switch Hardware RUBRGLAS SEELS RoHS : Compliant |
| 0 | ||
| 4086 4 | APM HEXSEAL | Switch Hardware Splice .027BR. RoHS : Compliant |
| 0 | ||
| 60845 | Klein Tools Inc | PPE Safety Equipment / Lockout Tagout Flame-Resistant Cotton Welding Sleeves |
| 0 | ||
| 6084-G | Pomona Electronics | Anti-Static Control Products WRIST STRAP W/ CLIP & CORD, 4KK41 |
| 0 | ||
| 6084C SL005 | Alpha Wire | Multi-Conductor Cables 24 AWG, 4 Pair Communication Cable, Shielded, 100 ft - Slate RoHS : Compliant |
| 0 | ||
| 6084C SL002 | Alpha Wire | Multi-Conductor Cables 24 AWG, 4 Pair Communication Cable, Shielded, 500 ft - Slate RoHS : Compliant |
| 0 | ||
![]() Newark | MH1608-471Y | Bourns Inc | Chip Ferrite Bead, 1A, 470 Ohm; |Bourns, Inc. MH1608-471Y RoHS : Compliant |
| 11,850 | |
| MH1608-471Y | Bourns Inc | Chip Ferrite Bead, 1A, 470 Ohm; |Bourns, Inc. MH1608-471Y RoHS : Compliant |
| 11,850 | ||
| MH1608-471Y | Bourns Inc | Chip Ferrite Bead, 1A, 470 Ohm; |Bourns, Inc. MH1608-471Y RoHS : Compliant |
| 8,965 | ||
| MH1608-471Y | Bourns Inc | Chip Ferrite Bead, 1A, 470 Ohm; |Bourns, Inc. MH1608-471Y RoHS : Compliant |
| 8,965 | ||
| D2608-42 | Harwin | Socket Ic, Solderless, 8Way; |Harwin D2608-42 RoHS : Compliant |
| 1,651 | ||
| 885012006084 | Wurth Elektronik | Cap, 680Pf, 100V, 5%, C0G/Np0, 0603; |Würth Elektronik 885012006084 RoHS : Compliant |
| 658 | ||
| 885012006084 | Wurth Elektronik | Cap, 680Pf, 100V, 5%, C0G/Np0, 0603; |Würth Elektronik 885012006084 RoHS : Compliant |
| 658 | ||
| M20-9960846 | Harwin | Conn, R/A Header, 8Pos, 1Row, 2.54Mm; |Harwin M20-9960846 RoHS : Compliant |
| 500 | ||
| 3036084 | Phoenix Contact | Dinrail Terminal Block, 6Way, 12Awg, Gry; |Phoenix Contact 3036084 RoHS : Compliant |
| 38 | ||
| N360846G802 | nVent Hoffman | Enclosure Cooling Spectracool N36 Series; |Nvent Hoffman N360846G802 RoHS : Compliant |
| 9 | ||
| MP016084 | SPC Multicomp | Contact Block, Limit Sw, 1No/1Nc, 10A; |Multicomp Pro MP016084 RoHS : Compliant |
| 5 | ||
| XR608416012 | nVent Hoffman | Heat Exchanger 115V 5060Hz; |Nvent Hoffman XR608416012 RoHS : Compliant |
| 3 | ||
| NB181608-40FS | L-com Inc | Encl Frp 18X16X8" W/Ss Dual Fan & Poe Mo; |L-Com NB181608-40FS RoHS : Not Compliant |
| 1 | ||
| 6084 | Pomona Electronics | Anti Static Wrist Strap, Metal; |Pomona 6084 RoHS : Not Compliant |
| 0 | ||
| 6084 | Keystone Electronics Corp | Banana Plug, Solderless, Red; |Keystone 6084 RoHS : Compliant |
| 0 | ||
![]() Analog Devices Inc | LTC6084HDD#TRPBF | Analog Devices Inc | 2x 1.5MHz, R2R, CMOS Amplifier RoHS : Compliant |
| 7,500 | |
| LTC6084CDD#PBF | Analog Devices Inc | 2x 1.5MHz, R2R, CMOS Amplifier RoHS : Compliant |
| 7,254 | ||
| LTC6084HDD#PBF | Analog Devices Inc | 2x 1.5MHz, R2R, CMOS Amplifier RoHS : Compliant |
| 5,734 | ||
| LTC6084CMS8#PBF | Analog Devices Inc | 2x 1.5MHz, R2R, CMOS Amplifier RoHS : Compliant |
| 3,754 | ||
| LTC6084CMS8#TRPBF | Analog Devices Inc | 2x 1.5MHz, R2R, CMOS Amplifier RoHS : Compliant |
| 2,500 | ||
| LTC6084HMS8#PBF | Analog Devices Inc | 2x 1.5MHz, R2R, CMOS Amplifier RoHS : Compliant |
| 4 | ||
| LTC6084HMS8#TRPBF | Analog Devices Inc | 2x 1.5MHz, R2R, CMOS Amplifier RoHS : Compliant |
| 0 | ||
| LTC6084CDD#TRPBF | Analog Devices Inc | 2x 1.5MHz, R2R, CMOS Amplifier RoHS : Compliant |
| 0 | ||
![]() RS | 3036084 (ST 2 5-PE/L/N) | Phoenix Contact | THREE-LEVEL TERMINAL BLOCK WITH SPRING-CAGE CONNECTION WIDTH: 5.2 MM ST SERIES |
| 58 | |
| BI1-EH04-AP6X-V1331 (4608440) | TURCK Inc | SENSOR INDUCTIVE M8 X 1 10 TO 30 VDC 100 MA (MAX.) (OPERATING), BI 1-EH04 SERIES |
| 39 | ||
| 608-4 | Klein Tools Inc | SCREWDRIVERS, NUT DRIVERS, CABINET, 4IN, 6.75IN, CUSHION-GRIP SCREWDRIVER SERIES |
| 8 | ||
| 9160849 | RS Pro | PNEUMATIC THREADED-TO-TUBE ELBOW ADAPTER MALE R 1/8 PUSH IN 4MM 1MPA |
| 4 | ||
| 86084005 | WERMA SIGNALTECHNIK GMBH + CO KG | WIN TRANSMITTER KOMBISIGN 70 24VAC/DC BK |
| 4 | ||
| 7756084 | RS Pro | MULTICONDUCTOR CABLE 2 CONDUCTOR 328FT 20AWG BLACK POLYVINYL CHLORIDE |
| 1 | ||
| 130006-0847 | Woodhead Molex | MINI-CHANGE A-SIZE SINGLE-ENDED CORDSET, 4 POLES, FEMALE (STRAIGHT) TO PIGTAIL |
| 1 | ||
| 6084 (1632932) | Pomona Electronics | ANTI-STATIC, CONTROL PRODUCTS, , STATIC CONTROL WRI |
| 1 | ||
| ME520C6W-60841 | Mennekes Electric | PIN AND SLEEVE WATERTIGHT CONNECTOR, 16A/20A, 5 WIRES, 200-415VAC, NEMA 4X |
| 1 | ||
| FG11-4SG.160.84 | Davies Molding LLC | FUNCTIONAL HANDLE - RAISED GREEN BUTTON |
| 1 | ||
| IG6084 (IGK3008A2PKG/US-104) | ifm efector inc | INDUCTIVE SENSOR, 18MM DIAMETER, 8MM NONFLUSH RANGE, 3WIRE DC, 0-10V, QD |
| 1 | ||
| P-RKG 4T-335-5-RSG 4T (U-76084) | TURCK Inc | PROCESS AUTOMATION, CORDSET, P-RKG 4T-335-5-RSG 4T |
| 1 | ||
| 6084 | Exair LLC | LINE VAC ONLY, (2" DIAMETER INLET/OUTLET), 2" ALUMINUM |
| 0 | ||
| 6084 | Keystone Electronics Corp | BANANA PLUG RoHS : Compliant |
| 0 | ||
| 6084 | Dichtomatik | O-RING, 64,50 3,00 80 NBR NB8027 |
| 0 | ||
![]() Bisco Industries | MS51960-84 | Crescent Manufacturing | 13,411 | |||
| 460-8452-02-93-00 | Cambion Electronics Ltd | RoHS : Compliant | 1,940 | |||
| 460-8450-01-03-00 | Cambion Electronics Ltd | RoHS : Compliant | 1,567 | |||
| 6084BG | BOYD Laconia | RoHS : Compliant | 1,080 | |||
| 63-060845-03 | ITW Shakeproof | 948 | ||||
| 460-8451-01-01-00 | Cambion Electronics Ltd | RoHS : Compliant | 93 | |||
| 63B06084540XBF | ITW Shakeproof | 51 | ||||
| 608455031000861+ | MISCELLANEOUS | 9 | ||||
| MS51960-84 | MS MACHINE SCREWS | 7 | ||||
| 60842-1 | TE Connectivity | RoHS : Compliant | 6 | |||
| 60843-1 | TE Connectivity | RoHS : Compliant | 2 | |||
| 60849-230 | nVent Schroff | 2 | ||||
| 6084 | Pomona Electronics | RoHS : Compliant | 1 | |||
| HL360-8-4-2 | Hi-Shear Technology Corporation | 1 | ||||
![]() Future Electronics | 6084 | Keystone Electronics Corp | Banana Plug RoHS : Compliant |
| 0 | |
![]() Onlinecomponents.com | 6084 | Pomona Electronics | Metal Wrist Strap With Clip And Cord, ESD RoHS : Compliant |
| 37 | |
| SF1115-6084 | Amphenol SV Microwave | 2.92mm Female to SMPM Male Adapter, FD RoHS : Compliant |
| 10 | ||
| 249-6084-000 | ITT Interconnect Solutions | Itt Cannon |Itt Cannon 249-6084-000 RoHS : Compliant |
| 5 | ||
| 039-6084-012 | ITT Interconnect Solutions | Itt Cannon |Itt Cannon 039-6084-012 RoHS : Compliant |
| 5 | ||
| 329-6084-003 | ITT Interconnect Solutions | Itt Cannon |Itt Cannon 329-6084-003 RoHS : Compliant |
| 1 | ||
| 6084 | Arrow Hart | RoHS : Compliant |
| 0 | ||
| 121537-6084 | ITT Interconnect Solutions | VG96929F-18ZNJ RoHS : Compliant |
| 0 | ||
| 6084-G | Pomona Electronics | RoHS : Compliant |
| 0 | ||
| 73403-6084 | Molex | RoHS : Compliant |
| 0 | ||
| 22-04-6084 | Molex | KK 100 Hdr FrLk Vert 08 Ckt Gold RoHS : Compliant |
| 0 | ||
| 15-91-6084 | Molex | 2.54mm Pitch C-Grid® Header, Surface Mount, Dual Row, Vertical, 8 Circuits, Tin (Sn) Plating, with 3.30mm PCB Locator Pegs, Tape and Reel RoHS : Compliant |
| 0 | ||
| 22-28-6084 | Molex | 2.54mm (.100") Pitch KK® Header, Breakaway, Right Angle, 8 Circuits, 0.76µm (30µ") Gold (Au) Selective Plating, Mating Pin Length 9.17mm (.361") RoHS : Compliant |
| 0 | ||
| 26-48-6084 | Molex | KK 156 Header Assy FrLk Break 08 Ckt Tin RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | BUK7608-40B,118![]() | NXP Semiconductors | MOSFET N-Channel 40V 75A (Ta) TO-263-3 T/R RoHS : Compliant |
| 1,732 | |
BUK7608-40B,118![]() | Nexperia | MOSFET N-Channel 40V 75A (Ta) TO-263-3 T/R RoHS : Compliant |
| 11,596 | ||
| IRSM836-084MA | Infineon Technologies AG | Power Driver Module MOSFET 250V 39-QFN Tray RoHS : Compliant |
| 1,641 | ||
IRSM836-084MATR![]() | Infineon Technologies AG | Power Driver Module MOSFET 250V 39-QFN T/R RoHS : Compliant |
| 27,887 | ||
| LTC6084CDD#PBF | Analog Devices Inc | Op Amp Standard 1.5MHz 10-SON Tube RoHS : Compliant |
| 110 | ||
| LTC6084CMS8#PBF | Analog Devices Inc | Op Amp Standard 1.5MHz 8-SOP Tube RoHS : Compliant |
| 21 | ||
| IRSM836-084MATR | International Rectifier | Power Driver Module MOSFET 250V 39-QFN T/R RoHS : Compliant |
| 3,550 | ||
| MAX16084XS16H+ | Maxim Integrated Products | MAX1608 Octal Smbus-To-Parallel I/O Expander |
| 3,270 | ||
| MAX16084XS16H+T | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +1.58V, BICMOS, PDSO4 |
| 17,500 | ||
LMC6084AIM![]() | National Semiconductor Corporation | Operational Amplifier, 4 Func, 350000uV Offset-Max, CMOS, PDSO14 RoHS : Not Compliant |
| 5,704 | ||
LMC6084AIM/NOPB![]() | National Semiconductor Corporation | Operational Amplifier, 4 Func, 350000uV Offset-Max, CMOS, PDSO14 RoHS : Compliant |
| 1,028 | ||
| LMC6084AMN | National Semiconductor Corporation | Operational Amplifier, 4 Func, 350000uV Offset-Max, CMOS, PDIP14 RoHS : Not Compliant |
| 783 | ||
LMC6084IM/NOPB![]() | National Semiconductor Corporation | Operational Amplifier, 4 Func, 800000uV Offset-Max, CMOS, PDSO14 RoHS : Compliant |
| 18 | ||
LMC6084IMX/NOPB![]() | National Semiconductor Corporation | Specialized Power Management Portable Equipment 30-BGA T/R RoHS : Compliant |
| 46 | ||
| LMC6084IN | National Semiconductor Corporation | Operational Amplifier, 4 Func, 800000uV Offset-Max, CMOS, PDIP14 RoHS : Not Compliant |
| 32,334 | ||
![]() Sager | 6084 | Keystone Electronics Corp | Test Plugs & Test Jacks RED NYLON BANANA RoHS : Compliant |
| 0 | |
| 2242460842 | Molex | MICROFIT+ DR VT HDR AU30 8CKT POL-E YLW RoHS : Compliant |
| 0 | ||
| 2046084006 | Molex | Heavy Duty Power Connectors CST Recpt Terminal Assy - 8 AWG RoHS : Compliant |
| 0 | ||
| 1200660845 | Molex | Sensor Cables / Actuator Cables MIC 3P M/MFE 2M 90/90 22/3 PUR |
| 0 | ||
| 9857316084 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9755216084 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9763006084 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9792116084 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9829016084 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9830016084 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9854016084 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 060-8467-01 | HONEYWELL TEST AND MEASUREMENT | AL131DV,1G,45B,45X MODEL 53, 10,000 LBS |
| 0 | ||
| 0153660847 | Molex | FFC / FPC Jumper Cables Premo-Shielded 0.5 Lgt 203 TypeA 15Ckt |
| 0 | ||
| 7701016084 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7701116084 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() ComSIT USA | LK16084R7KT | TAIYO YUDEN | MULTILAYER CHIP INDUCTOR General Purpose Inductor, 4.7uH, 10%, 1 Element, Ferrite-Core, SMD, 0603 RoHS : Compliant | 4,000 | ||
| SFH6084 | Vishay Intertechnologies | 5.3 KV, TRIOS , LOW CURRENT PHOTOTRANSISTOR OPTOCOUPLER Transistor Output Optocoupler, 1-Element, 5300V Isolation RoHS : Compliant | 3,830 | |||
| LMC6084IMNOPB | National Semiconductor Corporation | PRECISION CMOS QUAD OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 350uV Offset-Max, CMOS, PDSO14 RoHS : Compliant | 104 | |||
| U6084BAFP | tfk | Electronic Component RoHS : Not Compliant | 34 | |||
| LTC6084CDDPBF | Linear Technology | DUAL 1.5MHZ, RAIL-TO-RAIL, CMOS AMPLIFIER Operational Amplifier, 2 Func, 1350uV Offset-Max, CMOS, PDSO10 RoHS : Compliant | 34 | |||
![]() Interstate Connecting Components | 10-766084-041A | Amphenol Industrial Operations | AMPHE-PD, 5.7MM, PLUG, VERTICA 10-766084-041A | 0 | ||
| 10136656-0841LF | Amphenol FCi | 10136656-0841LF-MTK 3.0 08P SR RoHS : Unknown | 0 | |||
| 10137926-0844LF | Amphenol FCi | 10137926-0844LF-MTK3.0 8P VT S | 0 | |||
| 00160843203 | ITT Interconnect Solutions | 47176-14T3 | 0 | |||
| 00160848929 | ITT Interconnect Solutions | 48317-36T29 | 0 | |||
| 440AS116M1608-4 | Glenair Inc | 0 | ||||
| 440DS031B1608-4 | Glenair Inc | 0 | ||||
| 249-8608-424 | ITT Interconnect Solutions | 249-8608-424 | 0 | |||
| 121006-0844 | ITT Interconnect Solutions | CA3100E20-23S-F183-DN | 0 | |||
| 00160843003 | ITT Interconnect Solutions | 48317-20T3 | 0 | |||
| 9-547608-4 | TE Connectivity | WIRE RJ45, MCI PCS45Y-1M-08, 1 | 0 | |||
| 00460842439 | ITT Interconnect Solutions | 46792-14T39 | 0 | |||
| 440FS071M1608-4B | Glenair Inc | 0 | ||||
| 1616084-2 | TE Connectivity | AH965M=RELAY RoHS : Not Compliant |
| 0 | ||
| 5148608-4 | TE Connectivity | ASSY,PIN,EURO,TYPE R/2,LEAD-FR RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | AT62-16-0844 | Amphenol Tuchel |
| 14,135 | ||
| AT60-16-0844 | Amphenol Tuchel |
| 0 | |||
| S4658-C1608434 | SOURIAU-SUNBANK |
| 0 | |||
| RSL116084-S | Amphenol PCD |
| 0 | |||
| SE1C1608-4.5C-12 | SOURIAU-SUNBANK |
| 0 | |||
| S4039S1608-4L | SOURIAU-SUNBANK |
| 0 | |||
| 33516084303 | Amphenol PCD |
| 0 | |||
| 33516084303 | Amphenol Aerospace |
| 0 | |||
| J1236-084 | SOURIAU-SUNBANK |
| 0 | |||
| 367608-4 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 60843-1 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 20,129 | |
| AT60-16-0844 | Amphenol Sine Systems | Size 16 Pin Contact S F 2022AWG Gold |
| 10,560 | ||
| 2-179608-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 7,920 | ||
| 10137926-0841LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 3,937 | ||
| 2-796608-4 | TE Connectivity | Terminal Blocks RoHS : Compliant |
| 2,046 | ||
| NB16084001 | TE Connectivity | Connectors RoHS : Compliant |
| 1,386 | ||
| 2176084-4 | TE Connectivity | Resistors RoHS : Compliant |
| 1,320 | ||
| CS6084-000 | TE Connectivity | Connectors |
| 406 | ||
| 60-8489-050-007-049 | Kyocera AVX Components | Cap (Cover) |
| 82 | ||
| Y69900260847001PSF | TE Connectivity | CONNECTOR (MFR REF 69900260847001PSF) |
| 73 | ||
| 225608-4 | TE Connectivity | SMA RoHS : Compliant |
| 43 | ||
| 33516084303 | Amphenol PCD | SIM CONNECTOR |
| 26 | ||
| M20-8760842 | Harwin | Headers & Wire Housings RoHS : Compliant |
| 26 | ||
| 88-418608-44P | Amphenol Corporation | PLUG |
| 5 | ||
| 91-556084-35E | Amphenol Corporation | CONNECTOR |
| 2 | ||
![]() Richardson RFPD | LTC6084HDD#PBF | Analog Devices Inc | Op Amp Dual Precision Amplifier R-R I/O 5.5V Autom RoHS : Compliant |
| 0 | |
| SI5356A-B06084-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 200MHz-IN 200MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| TEF181608-40F | PolyPhaser | Weatherproof Outdoor Enclosure RoHS : Compliant |
| 0 | ||
| MSS60-848-E45 | MACOM | RF Diode Schottky 6V 0.05A 4-Pin RoHS : Compliant | 0 | |||
| 1658608-4 | TE Connectivity | Conn D-Subminiature M 9 POS 1.38mm IDT RA Cable Mo RoHS : Compliant |
| 0 | ||
| 126084 | Wakefield-Vette | HEAT PIPE RoHS : Compliant |
| 0 | ||
| MSS60-841-E45 | MACOM | RF Diode Schottky 6V 0.05A 4-Pin RoHS : Compliant | 0 | |||
| LTC6084CMS8#TRPBF | Analog Devices Inc | Op Amp Dual Precision Amplifier R-R I/O 5.5V Autom RoHS : Compliant |
| 0 | ||
| 225608-4 | TE Connectivity | Conn SMA RCP 50Ohm Crimp ST Panel Mount Gold Packa RoHS : Compliant | 0 | |||
| LTC6084CDD#PBF | Analog Devices Inc | Op Amp Dual Precision Amplifier R-R I/O 5.5V Autom RoHS : Compliant |
| 0 | ||
| LTC6084HDD#TRPBF | Analog Devices Inc | Op Amp Dual Precision Amplifier R-R I/O 5.5V Autom RoHS : Compliant |
| 0 | ||
| NMO-60-84-B1-A | Amphenol PCTEL | ANTENNA HARDWARE/ACC RoHS : Compliant |
| 0 | ||
| GMB-60-84-T1-A | Amphenol PCTEL | ANTENNA HARDWARE/ACC RoHS : Compliant |
| 0 | ||
| TEF181608-40FSAF | PolyPhaser | 18x16x08 Fiberglass Polyester FRP Weatherproof Out RoHS : Compliant |
| 0 | ||
| TEF181608-40FS | PolyPhaser | Weatherproof Outdoor Enclosure RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 1SNL608410R0000 | TE Connectivity | INSTOCK RoHS : Compliant | 61,480 | ||
| CL1608-4R7K-N | INSTOCK | 16,906 | ||||
| 1903608-4 | TE Connectivity | INSTOCK RoHS : Compliant | 15,600 | |||
| HCL1608-47NJ-N | INSTOCK | 15,093 | ||||
| GDB-1608-4R7M | INSTOCK | 9,500 | ||||
| 7608-472K | INSTOCK | 8,000 | ||||
| LCB1608-471Y-N | INSTOCK | 7,057 | ||||
| 2-796608-4 | TE Connectivity | INSTOCK RoHS : Compliant | 4,030 | |||
| LGHK16084N7S-T | INSTOCK | 4,000 | ||||
| 80176084- | INSTOCK | 4,000 | ||||
| GDP-1608-4R7M | INSTOCK | 3,000 | ||||
| 00401-0608-401 | INSTOCK | 1,693 | ||||
| LMC6084IM | INSTOCK | 1,045 | ||||
| HK160847NJ-T | TAIYO YUDEN | INSTOCK RoHS : Compliant | 962 | |||
| M20-9760846 | Harwin | INSTOCK RoHS : Compliant | 12 | |||
![]() Avnet Abacus | M80-6660842 | Harwin | Datamate LTek DIL Male Horizontal SMT Connector latched selective gold tin 44 contacts (Alt: M80-6660842) RoHS : Compliant | 2,520 | ||
| M20-9760846 | Harwin | 254mm 01 Pitch DIL Vertical PC Tail Pin Header 58mm mating pin height tin 88 contacts (Alt: M20-9760846) RoHS : Compliant | 1,500 | |||
| D2608-42 | Harwin | 254mm 01 Pitch Dual Row Press Fit IC Socket Assembly gold clip tin shell 8 contacts (Alt: D2608-42) RoHS : Compliant | 0 | |||
| 6646084-1 | TE Connectivity | CONNECTOR SOCKET DOMINO (Alt: 6646084-1) RoHS : Compliant | 0 | |||
| 982660843 | Molex | FFC Jumper Cable 15Conductors 0152m Copper 60VAC 05A Bag (Alt: 982660843) RoHS : Compliant | 0 | |||
| 1616084-2 | TE Connectivity | (Alt: 1616084-2) RoHS : Not Compliant | 0 | |||
| 5148608-4 | TE Connectivity | (Alt: 5148608-4) RoHS : Compliant | 0 | |||
| 2242460842 | Molex | (Alt: 2242460842) RoHS : Compliant | 0 | |||
| 2046084006 | Molex | (Alt: 2046084006) RoHS : Compliant | 0 | |||
| 1060840000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1060840000) RoHS : Compliant | 0 | |||
| M20-9760842 | Harwin | 254mm 01 Pitch DIL Vertical PC Tail Pin Header 58mm mating pin height selective gold tin (Alt: M20-9760842) RoHS : Compliant | 0 | |||
| M20-9960846 | Harwin | 254mm 01 Pitch SIL Horizontal PC Tail Pin Header 61mm mating pin height tin 8 contacts (Alt: M20-9960846) RoHS : Compliant | 0 | |||
| 8-2151608-4 | TE Connectivity | (Alt: 8-2151608-4) RoHS : Not Compliant | 0 | |||
| RLB0608-471KL | Bourns Inc | (Alt: RLB0608-471KL) RoHS : Compliant | 0 | |||
| AHA0608470M035R | Kyocera AVX Components | Hybrid Aluminium Electrolytic Capacitor 47 uF 20 35 V Radial Can SMD 006 ohm (Alt: AHA0608470M035R) RoHS : Compliant | 0 | |||
![]() Avnet Asia | MFBA2V1608-471-R | Eaton Corporation | (Alt: MFBA2V1608-471-R) RoHS : Compliant | 0 | ||
| 10137926-0841LF | Amphenol Corporation | (Alt: 10137926-0841LF) RoHS : Compliant | 0 | |||
| M20-8760842 | Harwin | (Alt: M20-8760842) RoHS : Compliant | 0 | |||
| 1969608-4 | TE Connectivity | (Alt: 1969608-4) RoHS : Compliant |
| 0 | ||
| NB16084001 | TE Connectivity | Heat Shrink Tubing 2:1 Polyolefin Clear (Alt: NB16084001) RoHS : Compliant | 0 | |||
| 2046084006 | Molex | (Alt: 2046084006) RoHS : Compliant | 0 | |||
| 1658608-4 | TE Connectivity | (Alt: 1658608-4) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | GLF1608-4R7K-T | Cal-Chip Electronics | IN STOCK SHIP TODAY |
| 4,000 | |
| HK16084N7S-T | TAIYO YUDEN | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,500 | ||
| LGHK16084N7S-T | TAIYO YUDEN | IN STOCK SHIP TODAY RoHS : Compliant | 2,400 | |||
| LFLK-1608-4R7K-T | TAIYO YUDEN | IN STOCK SHIP TODAY |
| 1,557 | ||
| DR0608-473L | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 250 | ||
| LMC60841M | National Semiconductor Corporation | IN STOCK SHIP TODAY | 200 | |||
| 746084-6 | TE Connectivity | IN STOCK SHIP TODAY | 70 | |||
| 71-300608-4P | Amphenol Corporation | IN STOCK SHIP TODAY |
| 54 | ||
| 1-746084-2 | TE Connectivity | IN STOCK SHIP TODAY | 36 | |||
| DR0608-472L | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 35 | ||
| 26-11-6084 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 16 | ||
| WKP608-470PF-400V-20% | Vishay Roederstein | IN STOCK SHIP TODAY | 12 | |||
| SM536084002Q3S6OF2 | Smart Cable Company | IN STOCK SHIP TODAY | 2 | |||
![]() DB Roberts | 63-060845-25 | ITW Shakeproof |
| 161 | ||
| 2608-440-SS | RAF Electronic Hardware | SQUARE FEMAL STANDOFFS NO PLATE | 0 | |||
| 496084 | Essentra Components | 31 ADHESIVE LINED HSTPOLYOLEFI | 0 | |||
| M6084-3005-A-24 | RAF Electronic Hardware | 0 | ||||
![]() EBV Elektronik | IRSM836-084MATR![]() | Infineon Technologies AG | 3Phase AC Motor Driver 115V to 185V 36Pin PQFN TR (Alt: SP001549934) RoHS : Compliant | 0 | ||
| BOXNUC7I3BNHXF 960847 | Intel Corporation | SBC x8664 Intel Core i37100U Dual Core 64Mbit SPI Flash (Alt: 960847) RoHS : Compliant | 0 | |||
![]() Flip Electronics | XR46084ESFTR-ADJ | MaxLinear Inc | Stock, Ship Today RoHS : Compliant |
| 24,444 | |
![]() Maritex | JPK0608-472K-R-16-A | Jantek Electronics Co. | Inductor THT; 4,7mH; Irms:160mA; 19,41R; �10%; Raster: 3mm |
| 2,824 | |
| L-RNP18-PK0608-472M | RDA Microelectronics | Inductor THT; 4.7mH; operating current: 160mA; 19.41Ohm; +-10%; 7.5x9.5mm |
| 1,900 | ||
| RNP18-PK0608-470K | RDA Microelectronics | Inductor: wire; THT; 47uH; Imax: 830 mA; 230mOhm; 10%; |
| 1,000 | ||
| RNP18-PK0608-471K | RDA Microelectronics | Inductor: wire; THT; 470uH; 500mA; 1.94Ohm; 10%; 7.5x9.5mm |
| 1,000 | ||
| RNP18-PK0608-472K | RDA Microelectronics | Inductor: wire; THT; 4.7mH; Ipracy: 160mA; 19.41Ohm; 10%; 7.5x9.5mm |
| 1,000 | ||
| RNP18-PK0608-4R7K | RDA Microelectronics | Inductor: wire; THT; 4.7uH; Ipracy: 5A; 22.94mOhm; 20%; 7.5x9.5mm |
| 1,000 | ||
![]() Master Electronics | 60843-1 | TE Connectivity | Commoning Bar 2 POS 4.95mm ST RoHS : Compliant |
| 30,499 | |
| 6084 | Pomona Electronics | Metal Wrist Strap With Clip And Cord ESD RoHS : Compliant |
| 37 | ||
| 608-4 | Klein Tools Inc | Cabinet Tip Miniature ScrewDriver 4 Round Shank RoHS : Compliant |
| 6 | ||
| 155608-4206 | ITT Interconnect Solutions | Connector Miniature Circular PIN 85 Position Solder Cup Straight Flange Mount 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 702306084 | OMRON Industrial Automation | MSF4800S-30-0640-SB1 RoHS : Compliant |
| 0 | ||
| MW-11-03-G-D-226-084-A-P-T | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-10-03-G-D-316-084 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-F-D-176-084 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-05-03-G-D-206-084-P-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1060840000 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Block Plug 3 Power Position 7.62mm Straight Cable Mount Black Box RoHS : Compliant |
| 0 | ||
| 003-8608-433 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| PT8101-0060-841-2111 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-286-084 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-276-084 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-216-084 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3608-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 48 inches. TNC Male to TNC Male Cable 48 Inch Length Using RG400 Coax., Radio frequency assembly TNC male to TNC male cable 48 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male cable 48 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3608-48, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3608-48 is built with RG400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable 48 inch length using RG400 coax. |
| 2,855 | |
| PE7608-40 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 40 dB, Attenuation Accuracy, Typ: 1.5 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 85 deg C, Min Operating Temperature: -50 deg C. 40 dB RF fixed attenuator 2W, DC to 6GHz, SMA Male to SMA Female, Stainless Steel. PE7608-40 is a fixed 40 dB attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7608-40 fixed attenuator is available with a typical attenuation accuracy of 1.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -50 and 85 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with passivated stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 40 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 40 dB. The Pasternack PE7608-40 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 40 dB attenuator has a passivated stainless steel connector built with plating. Our fixed RF attenuator PE7608-40 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 40 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 7 | ||
| PE3960-84 | Pasternack Enterprises | Key Specifications, Connector Series 1: LC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: LC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG218/U, RF Cable Type: RG218, RF Cable Impedance: 50 Ohm, Length: 84 inches. LC Male to LC Male Cable 84 Inch Length Using RG218 Coax., Radio frequency assembly LC male to LC male cable 84 inch length using RG218 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. LC male to LC male cable 84 inch length using RG218 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom LC to LC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with LC cable connection on one end and LC cable connection on the other. Our LC to LC cable assemblies have a male gender on end 1 and male on end 2. This LC to LC cable is a male to male coax assembly, PE3960-84, can also be known as a LC plug to LC plug cable assembly and will be shipped same-day as it is purchased. LC plug to LC plug cable assembly PE3960-84 is built with RG218 which is a flexible coax type. The Pasternack flexible LC cable assembly is manufactured with LC to LC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency LC male to LC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. LC plug to LC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality LC to LC cable assembly for quick shipment worldwide. Variations of LC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this LC male to LC male cable 84 inch length using RG218 coax. |
| 7 | ||
| PE7608-4 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 4 dB, Attenuation Accuracy, Typ: 0.6 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 85 deg C, Min Operating Temperature: -50 deg C. 4 dB RF fixed attenuator 2W, DC to 6GHz, SMA Male to SMA Female, Stainless Steel. PE7608-4 is a fixed 4 dB attenuator from Pasternack. This 4 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7608-4 fixed attenuator is available with a typical attenuation accuracy of 0.6 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -50 and 85 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with passivated stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 4 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 4 dB. The Pasternack PE7608-4 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 4 dB attenuator has a passivated stainless steel connector built with plating. Our fixed RF attenuator PE7608-4 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 4 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE3C6084 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. White FAKRA Jack Right Angle to Straight Cut Lead Cable Using RG316 Coax., Radio frequency assembly white FAKRA jack right angle to straight cut lead cable using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. White FAKRA jack right angle to straight cut lead cable using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to Straight Cut Lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle FAKRA cable connection on one end and Straight Cut Lead cable connection on the other. Our right angle FAKRA to Straight Cut Lead cable assemblies have a jack gender on end 1 and sexless on end 2. This FAKRA to Straight Cut Lead cable is a jack to sexless coax assembly, PE3C6084, can also be known as a right angle FAKRA female to Straight Cut Lead sexless cable assembly and will be shipped same-day as it is purchased. FAKRA female to Straight Cut Lead sexless cable assembly PE3C6084 is built with RG316 which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with right angle FAKRA to Straight Cut Lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FAKRA right angle jack to Straight Cut Lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6084 can also be used in the other direction and will be Straight Cut Lead sexless to right angle FAKRA jack cable assembly if the opposite connectivity is required. FAKRA right angle female to Straight Cut Lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to Straight Cut Lead cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this white FAKRA jack right angle to straight cut lead cable using RG316 coax. | 0 | |||
| PE3W06084/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Push-On SMP Female Right Angle to SSMB Jack Bulkhead Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly push-on SMP female right angle to SSMB jack bulkhead low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The push-on SMP female right angle to SSMB jack bulkhead low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SSMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMP cable connection on one end and a SSMB bulkhead cable connection on the other. Our low loss right angle SMP to SSMB cable assembly has a female gender on end 1 and a jack on end 2. PE3W06084/HS can also be known as a low loss right angle SMP jack to SSMB female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W06084/HS RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMP jack to SSMB female cable assembly PE3W06084/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to SSMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W06084/HS can also be used in the other direction and will be a SSMB jack bulkhead to right angle SMP female cable assembly if the opposite connectivity is required. Low loss SMP right angle jack to SSMB female bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SSMB cable assembly for quick shipment worldwide. Variations of SMP and SSMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SSMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W06084 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SSMB Jack Bulkhead to Push-On SMP Female Right Angle Cable Using LMR-100 Coax. PE3W06084 is a SSMB jack bulkhead to SMP female right angle cable using LMR-100A coax. This Pasternack SSMB jack bulkhead to SMP female right angle cable assembly uses a 50 Ohm SSMB for connector 1 and a 50 Ohm SMP for connector 2. SSMB to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack SSMB bulkhead to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06084 SSMB jack bulkhead to SMP female right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W06084/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Push-On SMP Female Right Angle to SSMB Jack Bulkhead Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly push-on SMP female right angle to SSMB jack bulkhead low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The push-on SMP female right angle to SSMB jack bulkhead low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SSMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMP cable connection on one end and a SSMB bulkhead cable connection on the other. Our low loss right angle SMP to SSMB cable assembly has a female gender on end 1 and a jack on end 2. PE3W06084/HS-100CM can also be known as a low loss right angle SMP jack to SSMB female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W06084/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMP jack to SSMB female cable assembly PE3W06084/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to SSMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W06084/HS-100CM can also be used in the other direction and will be a SSMB jack bulkhead to right angle SMP female cable assembly if the opposite connectivity is required. Low loss SMP right angle jack to SSMB female bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SSMB cable assembly for quick shipment worldwide. Variations of SMP and SSMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SSMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W16084LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MMCX Jack to Reverse Polarity TNC Female Bulkhead Cable Using RG316 Coax with HeatShrink, LF Solder. PE3W16084LF/HS is a MMCX jack to reverse polarity TNC female bulkhead cable using RG316 coax. This Pasternack MMCX jack to reverse polarity TNC female bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm TNC for connector 2. Our jack MMCX to reverse polarity female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16084LF/HS MMCX jack to TNC reverse polarity female bulkhead cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W06084/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Push-On SMP Female Right Angle to SSMB Jack Bulkhead Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly push-on SMP female right angle to SSMB jack bulkhead low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The push-on SMP female right angle to SSMB jack bulkhead low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SSMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMP cable connection on one end and a SSMB bulkhead cable connection on the other. Our low loss right angle SMP to SSMB cable assembly has a female gender on end 1 and a jack on end 2. PE3W06084/HS-48 can also be known as a low loss right angle SMP jack to SSMB female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W06084/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMP jack to SSMB female cable assembly PE3W06084/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to SSMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W06084/HS-48 can also be used in the other direction and will be a SSMB jack bulkhead to right angle SMP female cable assembly if the opposite connectivity is required. Low loss SMP right angle jack to SSMB female bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SSMB cable assembly for quick shipment worldwide. Variations of SMP and SSMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SSMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W06084/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Push-On SMP Female Right Angle to SSMB Jack Bulkhead Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly push-on SMP female right angle to SSMB jack bulkhead low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The push-on SMP female right angle to SSMB jack bulkhead low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SSMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMP cable connection on one end and a SSMB bulkhead cable connection on the other. Our low loss right angle SMP to SSMB cable assembly has a female gender on end 1 and a jack on end 2. PE3W06084/HS-200CM can also be known as a low loss right angle SMP jack to SSMB female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W06084/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMP jack to SSMB female cable assembly PE3W06084/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to SSMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W06084/HS-200CM can also be used in the other direction and will be a SSMB jack bulkhead to right angle SMP female cable assembly if the opposite connectivity is required. Low loss SMP right angle jack to SSMB female bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SSMB cable assembly for quick shipment worldwide. Variations of SMP and SSMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SSMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W06084LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Push-On SMP Female Right Angle to SSMB Jack Bulkhead Cable Using LMR-100 Coax, LF Solder. PE3W06084LF is a SMP female right angle to SSMB jack bulkhead cable using LMR-100A coax. This Pasternack SMP female right angle to SSMB jack bulkhead cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SSMB for connector 2. SMP right angle to SSMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to jack SSMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06084LF SMP female right angle to SSMB jack bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W06084/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Push-On SMP Female Right Angle to SSMB Jack Bulkhead Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly push-on SMP female right angle to SSMB jack bulkhead low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The push-on SMP female right angle to SSMB jack bulkhead low loss cable 24 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SSMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMP cable connection on one end and a SSMB bulkhead cable connection on the other. Our low loss right angle SMP to SSMB cable assembly has a female gender on end 1 and a jack on end 2. PE3W06084/HS-24 can also be known as a low loss right angle SMP jack to SSMB female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W06084/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMP jack to SSMB female cable assembly PE3W06084/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to SSMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W06084/HS-24 can also be used in the other direction and will be a SSMB jack bulkhead to right angle SMP female cable assembly if the opposite connectivity is required. Low loss SMP right angle jack to SSMB female bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SSMB cable assembly for quick shipment worldwide. Variations of SMP and SSMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SSMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE71S6084 | Pasternack Enterprises | Key Specifications, Connector Series: 2.92mm, Connector Gender: Female, Switch Design: SP6T, Minimum Frequency: DC, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Maximum Input Power (CW): 5 Watts, Maximum VSWR: 2.2:1, Maximum Insertion Loss: 1.1 dB, Minimum Isolation: 50 dB. SP6T Electromechanical Relay Latching Switch, Terminated, DC to 40 GHz, up to 40W, 28V Indicators, Reset, 2.92mm. PE71S6084 electromechanical RF relay switch from Pasternack is a SP6T design. Our SP6T electromechanical RF switch uses 2.92mm connectors at 50 Ohm. This 2.92mm RF relay SP6T switch has a maximum frequency of 40 GHz and maximum power of 5 Watts. The Pasternack radio frequency SP6T 2.92mm electro-mechanical relay switch is rated at a control voltage of 28 Volts, indicator voltage 30 and switching speed of 15ms. 2.92mm SP6T electro mechanical RF relay switch features Indicators, Reset with an isolation minimum of 50 dB. SP6T electromechanical relay radio frequency switch PE71S6084 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our SP6T 2.92mm coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts. |
| 0 | ||
| PE3W06084/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Push-On SMP Female Right Angle to SSMB Jack Bulkhead Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly push-on SMP female right angle to SSMB jack bulkhead low loss cable 36 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The push-on SMP female right angle to SSMB jack bulkhead low loss cable 36 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SSMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMP cable connection on one end and a SSMB bulkhead cable connection on the other. Our low loss right angle SMP to SSMB cable assembly has a female gender on end 1 and a jack on end 2. PE3W06084/HS-36 can also be known as a low loss right angle SMP jack to SSMB female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W06084/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMP jack to SSMB female cable assembly PE3W06084/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to SSMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W06084/HS-36 can also be used in the other direction and will be a SSMB jack bulkhead to right angle SMP female cable assembly if the opposite connectivity is required. Low loss SMP right angle jack to SSMB female bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SSMB cable assembly for quick shipment worldwide. Variations of SMP and SSMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SSMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
![]() Venkel Ltd. | LMCI1608-47NJT | VENKEL LTD | Low Value Multilayer Chip Inductor;0603;47nH;�5% RoHS : Compliant | 0 | ||
| LMCI1608-4N7ST | VENKEL LTD | Low Value Multilayer Chip Inductor;0603;4.7nH;�0.3nH RoHS : Compliant | 0 | |||
| MLF1608-47NMT | VENKEL LTD | Multilayer Chip Inductor;0603;47nH;�20% RoHS : Compliant | 0 | |||
| LMCI1608-47NKT | VENKEL LTD | Low Value Multilayer Chip Inductor;0603;47nH;�10% RoHS : Compliant | 0 | |||
| MLF1608-4R7MT | VENKEL LTD | Multilayer Chip Inductor;0603;4.7uH;�20% RoHS : Compliant | 0 | |||
| MLF1608-4R7KT | VENKEL LTD | Multilayer Chip Inductor;0603;4.7uH;�10% RoHS : Compliant | 0 | |||
![]() Vyrian | MAX16084XS16H-T | Analog Devices (Maxim Integrated) | 12,114 | |||
| LTC6084HDD#TR | Analog Devices Inc | Operational Amplifier, 2 Func, 1600uV Offset-Max, CMOS, PDSO10 RoHS : Not Compliant | 12,064 | |||
| MAX16084XS41V-T | Analog Devices (Maxim Integrated) | 11,621 | ||||
| MAX16084XS16P-T | Analog Devices (Maxim Integrated) | 11,400 | ||||
| MAX16084AXS17B | Analog Devices (Maxim Integrated) | 9,242 | ||||
| MAX16084XS16H | Analog Devices (Maxim Integrated) | 8,585 | ||||
LMC6084IMX![]() | Texas Instruments | Operational Amplifier, 4 Func, 1300uV Offset-Max, CMOS, PDSO14 RoHS : Not Compliant | 7,984 | |||
| LTC6084HMS8-PBF | Analog Devices Inc | 7,691 | ||||
| LTC6084HDD#PBF | Analog Devices Inc | Operational Amplifier, 2 Func, 1600uV Offset-Max, CMOS, PDSO10 RoHS : Compliant | 6,814 | |||
| LTC6084CMS8 | Analog Devices Inc | Operational Amplifier, 2 Func, 900uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant | 6,584 | |||
| MAX16084US | Analog Devices (Maxim Integrated) | 6,474 | ||||
| LTC6084CDD#TR | Analog Devices Inc | Operational Amplifier, 2 Func, 1350uV Offset-Max, CMOS, PDSO10 RoHS : Not Compliant | 6,360 | |||
| LTC6084CMS8#TRPBF | Analog Devices Inc | Operational Amplifier, 2 Func, 900uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 6,044 | |||
BUK7608-40B,118![]() | Nexperia | Power Field-Effect Transistor, 101A I(D), 40V, 0.008ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 5,702 | |||
| MAX16084AUS | Analog Devices (Maxim Integrated) | 4,945 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |