Electronic Components Datasheet Search
  English  ▼

X  



6002G-AE2-R Distributor

DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

Pasternack Enterprises US
PE3600-24

Pasternack Enterprises Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMC Plug to SMC Plug Right Angle Cable 24 Inch Length Using RG188 Coax., Radio frequency assembly SMC plug to SMC plug right angle cable 24 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to SMC plug right angle cable 24 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and right angle SMC cable connection on the other. Our SMC to right angle SMC cable assemblies have a plug gender on end 1 and plug on end 2. This SMC to SMC cable is a plug to plug coax assembly, PE3600-24, can also be known as a SMC male to right angle SMC male cable assembly and will be shipped same-day as it is purchased. SMC male to SMC male cable assembly PE3600-24 is built with RG188 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to right angle SMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMC plug to SMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3600-24 can also be used in the other direction and will be right angle SMC plug to SMC plug cable assembly if the opposite connectivity is required. SMC male to SMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to SMC plug right angle cable 24 inch length using RG188 coax.
1 : $48.59
25 : $46.16
50 : $43.73
100 : $41.79
283
PE15A6002

Pasternack Enterprises Key Specifications, Gain: 60 dB, Power Output: 19 dBm Psat, Power Input Min: -40 dBm, Power Input Max: 10 dBm, Frequency, Min: 1 GHz, Frequency, Max: 2 GHz, Noise Figure, Max: 2.5 dB, RF Output VSWR Max: 2:1, Connector Series: SMA. 60 dB Gain, 19 dBm Psat, 1 GHz to 2 GHz, Limiting Amplifier, -40 to 10 dBm Pin, SMA. PE15A6002 limiting amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized limiting amplifier uses SMA connectors. This SMA limiting amplifier has a minimum frequency of 1 GHz and maximum frequency of 2 GHz. The minimum gain of this limiting radio frequency amplifier is 60 dB with a minimum saturated output power of 19 dBm Psat. RF limiting amplifier PE15A6002 is rated at -40 dBm minimum power input and 10 maximum power input. Our limiting radio frequency amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial limiting amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
1 : $2,060.0
5 : $1,977.6
10 : $1,895.2
15
PE3W11600-24

Pasternack Enterprises Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Female Bulkhead to N Male Cable 24 Inch Length Using RG141 Coax., Radio frequency assembly TNC female bulkhead to N male cable 24 inch length using RG141 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC female bulkhead to N male cable 24 inch length using RG141 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and type N cable connection on the other. Our TNC to N type cable assemblies have a female gender on end 1 and male on end 2. PE3W11600-24 can also be known as a TNC jack to type N plug cable assembly and will be shipped same-day as it is purchased. TNC jack to type N plug cable assembly PE3W11600-24 is built with RG141 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency TNC female bulkhead to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11600-24 can also be used in the other direction and will be N type male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to N type cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to N male cable 24 inch length using RG141 coax.
1 : $126.99
25 : $120.64
50 : $114.29
100 : $109.21
10
PE46002

Pasternack Enterprises Key Specifications, Connector Series: TNC, Connector Gender: Female, Impedance: 50 Ohm, Body Style: 45 Degree, Mount Method: PCB, Minimum Frequency: DC, Maximum Frequency: 18 GHz. TNC Female PCB Mount Connector, 45 Degree angle with round contact 0.0394 inches diameter, 18GHz VSWR1.2. PE46002 TNC female 45 degree PCB RF connector has an impedance of 50 Ohm. Our female TNC 45 degree connector provides a maximum frequency of 18 GHz. This TNC female RF connector is stocked to be readily available for same business day shipment. The Pasternack 45 degree TNC female PCB connector has a teflon dielectric type and a VSWR of 1.2:1. Pasternack's TNC connector has a brass body with gold over nickel over copper plating. Our PE46002 TNC 45 degree connector uses acopper-tin-zinc alloy-plated beryllium copper contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector is made from brass material and has a contact life of 500 cycles or more. The PE46002 TNC PCB connector operates at a temperature range of -65 to 165 deg C. This female RF connector has a maximum insertion loss of 0.42 dB. The Pasternack TNC female connector has a dielectric withstanding voltage of 1,500 Vrms. This Pasternack 45 degree female TNC PCB connector will ship the same business day as purchased. Our PCB TNC 45 degree female connector is part of RF, microwave and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.
1 : $58.89
25 : $55.95
50 : $53.0
100 : $50.65
5
PE3W16002

Pasternack Enterprises Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. NEX10 Male to SMA Female Cable Using SPP-250-LLPL Coax. PE3W16002 is a NEX10 male to SMA female cable using SPP-250-LLPL coax. This Pasternack NEX10 male to SMA female cable assembly uses a 50 Ohm NEX10 for connector 1 and a 50 Ohm SMA for connector 2. Our male NEX10 to female SMA cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W16002 NEX10 male to SMA female cable assembly is constructed with SPP-250-LLPL coax.
0
PE3C6002

Pasternack Enterprises Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Female Cable Using LMR-400 Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN female cable using LMR-400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN female cable using LMR-400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to 7/16 DIN cable is a male to female coax assembly, PE3C6002, can also be known as a 7/16 DIN plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN jack cable assembly PE3C6002 is built with LMR-400 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7/16 DIN male to 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6002 can also be used in the other direction and will be 7/16 DIN female to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN female cable using LMR-400 coax.
0
PE3W06002

Pasternack Enterprises Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SSMA Male Right Angle to SMA Male Cable Using RG316-DS Coax. PE3W06002 is a SSMA male right angle to SMA male cable using RG316-DS coax. This Pasternack SSMA male right angle to SMA male cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SMA for connector 2. SSMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SSMA right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06002 SSMA male right angle to SMA male cable assembly is constructed with RG316-DS coax.
0
PE3C6002/HS

Pasternack Enterprises Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Female Cable Using LMR-400 Coax with HeatShrink. PE3C6002/HS is a 7/16 DIN male to 7/16 DIN female cable using LMR-400 coax. This Pasternack 7/16 DIN male to 7/16 DIN female cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 7/16 DIN to female 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C6002/HS 7/16 DIN male to 7/16 DIN female cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE6002

Pasternack Enterprises Key Specifications, Termination Type: RF Load, Connector Series: SMA, Connector Gender: Male, Minimum Frequency: DC, Maximum Frequency: 12.4 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.17:1, Maximum Power: 0.5 Watt. 0.5 Watt RF Load Up to 12.4 GHz With SMA Male Input Passivated Stainless Steel. PE6002 0.5 Watts RF load (also known as termination or dummy load) has a SMA connector that is male. This Pasternack 0.5 watt SMA male load / termination is rated for a maximum frequency of 12.4 GHz. Our SMA male termination load is a rf load termination with a 50 Ohm impedance. This SMA load / coax terminator is manufactured with no chain and passivated stainless steel body. Pasternack 50 Ohm SMA coaxial termination / load is RoHS compliant and has an average maximum VSWR of 1.17:1. PE6002 0.5 watt SMA male load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our SMA male 0.5 watt termination load will ship worldwide the same day as purchased.
RoHS : Compliant
1 : $68.49
25 : $65.07
50 : $61.64
100 : $58.9
0
PE80T6002

Pasternack Enterprises Key Specifications, Type: Tunnel Diode, Detector Polarity: Negative, Connector In Series: SMA, Connector In Gender: Male, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 100 MHz, Maximum Frequency: 4 GHz, Connector In Impedance: 50 Ohm. Tunnel Diode Detector, SMA, 5 nsec Pulse Risetime, Negative Video Out, +17 dBm max Pin, 100 MHz to 4 GHz. Pasternack tunnel diode detector PE80T6002 is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This tunnel diode detector is manufactured with SMA male to SMA female connectors. Our SMA tunnel diode detector has a minimum frequency of 100 MHz and a maximum frequency of 4 GHz. This SMA coaxial RF detector has a maximum input power of 17 dBm and a video capacitance of 0 pF. PE80T6002 coaxial SMA detector is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our tunnel diode detector can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.
1 : $936.99
5 : $899.51
10 : $862.03
0
PE33600-24

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male Right Angle to BNC Male Cable 24 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA male right angle to BNC male cable 24 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to BNC male cable 24 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and BNC cable connection on the other. Our right angle SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE33600-24, can also be known as a right angle SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE33600-24 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33600-24 can also be used in the other direction and will be BNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to BNC male cable 24 inch length using RG316-DS coax.
1 : $76.39
25 : $72.57
50 : $68.75
100 : $65.7
0
PE34600-24

Pasternack Enterprises Key Specifications (Click on Data Sheet Above for Additional Details) .Connector Series 1BananaConnector Gender 1PlugConnector Polarity 1StandardConnector Angle 1StraightConnector Mount Method 1NoneConnector Impedance 10Connector Series 2BananaConnector Gender 2PlugConnector Polarity 2StandardConnector Angle 2StraightConnector Mount Method 2NoneConnector Impedance 20RF Cable Part NumberRG316/URF Cable TypeRG316RF Cable Impedance50. Banana Plug to Banana Plug Cable 24 Inch Length Using RG316 Coax. Very low frequency equipment test lead cable assembly PE34600-24 from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a banana connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and plug for side 2. Banana plug to banana plug cable test lead for RF is constructed with RG316 cable and the impedance is 50 Ohm. PE34600-24 Banana plug to banana plug test equipment lead using RG316 cable has a 24 inch length. Pasternack banana to banana RG316 very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to banana connectors and RG316 cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States.
1 : $66.09
25 : $62.79
50 : $59.48
100 : $56.84
0
PE37600-24

Pasternack Enterprises Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length: 24 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable 24 Inch Length Using RG217 Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable 24 inch length using RG217 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male right angle cable 24 inch length using RG217 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE37600-24, can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE37600-24 is built with RG217 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7/16 DIN male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37600-24 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male right angle cable 24 inch length using RG217 coax.
1 : $523.99
25 : $497.79
50 : $471.59
0
PE3MSA00600-24

Pasternack Enterprises Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: PLUG, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. LSZH TRB Threaded Plug to 3-Lug TRB Non-Insulated Bulkhead Jack for TWCH-78-2, 24" Twinax Cable., Radio frequency assembly LSZH TRB threaded plug to 3-Lug TRB non-insulated bulkhead jack for TWCH-78-2, 24" twinax cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The LSZH TRB threaded plug to 3-Lug TRB non-insulated bulkhead jack for TWCH-78-2, 24" twinax cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MSA00600-24 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MSA00600-24 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00600-24 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this LSZH TRB threaded plug to 3-Lug TRB non-insulated bulkhead jack for TWCH-78-2, 24" twinax cable.
1 : $326.99
25 : $310.64
50 : $294.29
100 : $281.21
0
PE15A86002

Pasternack Enterprises Key Specifications, Power Output: 14 dBm P1dB, Frequency, Min: DC, Frequency, Max: 17 MHz, Gain: 30 dB, RF Input VSWR, Max: 1.2, Voltage, DC Min: 8 Volts, Voltage, DC Max: 15 Volts, Connector Series: SMA. 14 dBm P1dB, DC to 17 MHz, Gain Block Amplifier, 30 dB Gain, 25 dBm IP3, SMA. PE15A86002 RF gain block amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized gain block RF amplifier uses SMA connectors. This SMA gain block amplifier has a minimum frequency of DC, a maximum frequency of 17 MHz and a typical gain of 30 dB. Our radio frequency gain block amp PE15A86002 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial gain block amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
1 : $1,070.0
5 : $1,027.2
10 : $984.4
0

Vyrian
ZABG6002JB20TC

Diodes Incorporated Consumer Circuit, PQCC20
18,303
ZXMS6002GQTA

Diodes Incorporated Power Field-Effect Transistor, 1.4A I(D), 60V, 0.675ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET
16,672
ZABG6002Q20TC

Diodes Incorporated Consumer Circuit
11,764
V62/03660-02XE

Texas Instruments AND Gate, LV/LV-A/LVX/H Series, 4-Func, 2-Input, CMOS, PDSO14
RoHS : Compliant
9,047
XG2A-6002

OMRON Corporation Board Connector, 60 Contact(s), 2 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator
RoHS : Compliant
7,977
TSL6002IST

STMicroelectronics
RoHS : Compliant
6,969
XLS408XD0600-21

Broadcom Limited
6,583
XLP316XD1600-20

Broadcom Limited
5,747
ST16002D

Littelfuse Inc NTC Thermistor, 16ohm, Through Hole Mount
RoHS : Unknown
5,222
V62/04660-02YE

Texas Instruments Multiplexer, LVC/LCX/Z Series, 4-Func, 2 Line Input, 1 Line Output, True Output, CMOS, PDSO16
RoHS : Compliant
4,608
TC54VN6002ECB713

Microchip Technology Inc Power Supply Support Circuit, Fixed, 1 Channel, +6V, CMOS, PDSO3
RoHS : Compliant
4,110
TSL6002IYDT

STMicroelectronics
RoHS : Compliant
4,021
TSL6002IDT

STMicroelectronics Operational Amplifier, 2 Func, 4500uV Offset-Max, PDSO8
RoHS : Compliant
3,679
UMX6002SM

Microchip Technology Inc Pin Diode, 200V V(BR), Silicon
3,450
XLH736002.096000I

Renesas Electronics Corporation HCMOS Output Clock Oscillator, 2.096MHz Nom
486

Waytek, Inc.
160-021

AFC Cable Systems Inc Non-Metallic Electrical Tubing Black 3/4" 100 FT UL LIQUID TIGHT
100 : $1.3901
500 : $1.3132
4,200
19056-0025

Molex The Molex 19056-0025 non-insulated ring terminal fits 22-18 Ga. wire and a 5/16" stud. Constructed from tin-plated copper, it provides reliable conductivity and corrosion resistance for electrical terminations. Its brazed-seam barrel adds wire-holding strength, allows easy wire insertion, and supports crimping at any position around the barrel for secure installation.
100 : $0.282
200 : $0.2728
500 : $0.2466
1,000 : $0.2466
5,000 : $0.2466
4,176
190560023

Molex The Molex 19056-0023 non-insulated ring terminal fits 22-18 Ga. wire and a 1/4" stud. Constructed from tin-plated copper, it provides reliable conductivity and corrosion resistance for electrical terminations. Its brazed-seam barrel adds wire-holding strength, allows easy wire insertion, and supports crimping at any position around the barrel for secure installation.
100 : $0.3724
200 : $0.3386
500 : $0.301
1,000 : $0.2734
5,000 : $0.2608
2,091
160-026

AFC Cable Systems Inc Non-Metallic Electrical Tubing Black 1" 100 FT UL
100 : $2.7038
500 : $2.4545
200
19M-P10-R-060-02

MP Mechanical Products 19M-P10-R-060-02 is a Series 19 circuit breaker 60A, 30VDC, Type III manual reset LED. Additional details include SAE J1625 compliant, UL Recognized - UL1077, and SAE J1171 ignition protection.
1 : $31.73
5 : $30.45
10 : $29.17
50 : $28.1
100 : $27.25
89
19M-P10-B-060-02

MP Mechanical Products 19M-P10-B-060-02 is a Series 19 circuit breaker, 60A, 30VDC, Type III manual reset. Additional details include SAE J1625 compliant, UL Recognized - UL1077, and SAE J1171 ignition protection.
1 : $48.55
5 : $43.31
10 : $40.49
50 : $38.24
100 : $36.37
200 : $34.68
27
26002-6

FTZ Industries FTZ Industries 26002-6 thin-wall heat shrink tubing is black polyolefin tubing supplied in 6" lengths with a 2:1 shrink ratio for wire, terminal, and splice protection. Its flexible thin-wall construction supports clean shrink coverage, abrasion protection, and dependable insulation, with 40 pieces per bag.
40 : $0.1958
80 : $0.1745
200 : $0.1649
400 : $0.1851
25
19A-P10-R-060-02

MP Mechanical Products 19A-P10-R-060-02 is a Series 19 circuit breaker, 60A, 30VDC, Type I auto reset LED. Additional details include SAE J1625 compliant, UL Recognized - UL1077, and SAE J1171 ignition protection.
1 : $44.91
5 : $40.06
10 : $37.45
50 : $35.37
100 : $33.64
200 : $32.08
16

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com