| Electronic Components Datasheet Search |
|
5672 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Verical | 5672236001 | TE Connectivity | Heat Shrink Tubing RoHS : Compliant |
| 2,500 | |
| 56-724-005-LI | Spectrum Control | Conn D-Sub SKT 25 POS Solder RA Thru-Hole 25 Terminal 1 Port RoHS : Not Compliant |
| 43 | ||
| 56-721-003-LI | Spectrum Control | EMI FILTERED D-SUB CONNECTOR |
| 36 | ||
| 56-721-046 | Spectrum Control | EMI FILTERED D-SUB CONNECTOR |
| 1 | ||
![]() Avnet Americas | 5-102567-2 | TE Connectivity | - Trays (Alt: 5-102567-2) RoHS : Compliant |
| 512 | |
| JANTX2N5672 | Microchip Technology Inc | Trans GP BJT NPN 120V 30A 2-Pin TO-3 Tray - Bulk (Alt: JANTX2N5672) RoHS : Not Compliant |
| 100 | ||
| 1SNA235672R0000 | TE Connectivity | Self Adhesive Label Holder Polyamide Black - Bulk (Alt: 1SNA235672R0000) RoHS : Not Compliant |
| 0 | ||
| Y5672100R0009W | VPG Foil Resistors | FRSM1506U GF.100R 931753 - Waffle Pack (Alt: Y5672100R0009W) RoHS : Not Compliant |
| 0 | ||
| 14-56-7255 | Molex | CGRID SL IDT OPT C 15SAU 25CKT - Bulk (Alt: 0014567255) RoHS : Compliant |
| 0 | ||
| MT36VDDT25672M3Y-265J1 | Micron Technology Inc | - Trays (Alt: MT36VDDT25672M3Y-265J1) RoHS : Not Compliant | 0 | |||
| 1-102567-2 | TE Connectivity | - Trays (Alt: 1-102567-2) RoHS : Not Compliant |
| 0 | ||
| PTF5672K420BXBF | Vishay Intertechnologies | - Bulk (Alt: PTF5672K420BXBF) RoHS : Not Compliant |
| 0 | ||
| 1045672-1 | TE Connectivity | - Bag (Alt: 1045672-1) RoHS : Compliant |
| 0 | ||
| M39003/01-5672 | Vishay Intertechnologies | Tantalum Capacitor, 0.33 uF, 50 V, ? 5%, Axial Leaded, S, 3.43 mm, 7.26 mm - Bulk (Alt: M39003/01-5672) RoHS : Not Compliant |
| 0 | ||
| M39003/01-5672/HSD | Vishay Intertechnologies | Tantalum Capacitor, 0.33 uF, 50 V, ? 5%, Axial Leaded, S, 3.43 mm, 7.26 mm - Custom Tape W/Leader (Alt: M39003/01-5672/HSD) RoHS : Not Compliant |
| 0 | ||
| DSPB56725CAF | NXP Semiconductors | - Trays (Alt: DSPB56725CAF) RoHS : Compliant |
| 0 | ||
| 019-8567-240 | ITT Interconnect Solutions | - Bulk (Alt: 019-8567-240) RoHS : Not Compliant |
| 0 | ||
| 935156723410-T3N | Murata Manufacturing Co Ltd | C-NEW SI-IPD SIPIC SI-CAP - Tape and Reel (Alt: 935156723410-T3N) RoHS : Compliant |
| 0 | ||
ABM8W-13.5672MHZ-6-K1Z-T3![]() | Abracon Corporation | - Tape and Reel (Alt: ABM8W-13.5672MHZ-6-K1Z-T3) RoHS : Compliant | 0 | |||
![]() Mouser Electronics | 274-2AB | Wakefield-Vette | Heat Sinks Wave-Solderable Heat Sink, TO220, 13.2x19.1x12.7mm, Vertical/Horizontal, No Tab RoHS : Compliant |
| 12,475 | |
| 285SC | Wakefield-Vette | Heat Sinks SpeedClips for Use with 232/237/240/252/667, Carbon Steel, 10lbs Loading Force RoHS : Compliant |
| 8,812 | ||
| 235-85AB | Wakefield-Vette | Heat Sinks Heat Sink for TO220, 25.4x12.7x21.6mm, Vertical/Horizontal, No Tab RoHS : Compliant |
| 4,905 | ||
| 274-1AB | Wakefield-Vette | Heat Sinks Wave-Solderable Heat Sink, TO220, 13.2x19.1x9.5mm, Vertical/Horizontal, No Tab RoHS : Compliant |
| 4,601 | ||
| 281-1AB | Wakefield-Vette | Heat Sinks Low Height, Wave-Solderable Heat Sink for TO-220 RoHS : Compliant |
| 4,497 | ||
| 230-75AB | Wakefield-Vette | Heat Sinks Wave-Solderable Heat Sink, TO220, 14.5x12.7x19.1mm, Vertical/Horizontal, No Tab RoHS : Compliant |
| 3,944 | ||
| 233-60AB | Wakefield-Vette | Heat Sinks Wave-Solderable Heat Sink, TO220, 14.5x12.7x15.2mm, Vertical/Horizontal, No Tab RoHS : Compliant |
| 3,776 | ||
| 291-H36AB | Wakefield-Vette | Heat Sinks Heat Sink, Anodized, 27.0x9.1x21.9mm, TO-220 Mounting Hole Only (No Lock Clip) RoHS : Compliant |
| 3,210 | ||
| 286-AB | Wakefield-Vette | Heat Sinks Aluminum, Wave-Solderable Heat Sink for TO220, Anodized, 25.4x12.7x30.2mm RoHS : Compliant |
| 3,027 | ||
| 290-2AB | Wakefield-Vette | Heat Sinks Dual Package Heat Sink for TO-218, TO-220, TO-202, Aluminum, 25.4x30.0x12.7mm RoHS : Compliant |
| 1,875 | ||
| 268-85CTE | Wakefield-Vette | Heat Sinks Heat Sink for TO220 with Clip, Copper, Channel Style, 21.55x13.21x13.08mm RoHS : Compliant |
| 1,303 | ||
| 242-125ABE-22 | Wakefield-Vette | Heat Sinks Low Profile Twisted Fin Heat Sink, Aluminum, 22.2x6.4x32.6mm, Vertical, 22 Tab RoHS : Compliant |
| 401 | ||
| 260-4T5E | Wakefield-Vette | Heat Sinks Cup Clips for TO-5 Case Style Semiconductors, 2.36mm Tapped Base Depth RoHS : Compliant |
| 149 | ||
| 5672 | Adafruit Industries | Multiprotocol Development Tools ESP32-C6-DevKitC-1-N8 - 8MB SPI Flash RoHS : Compliant |
| 17 | ||
| SEAC-040-06-11.8-TU-TU-N | Samtec Inc | Ribbon Cables / IDC Cables .050" SEARAY(trademark) High-Speed High-Density Array Cable Assembly |
| 0 | ||
![]() Arrow Electronics | 56-724-005-LI | Spectrum Control | Conn D-Sub SKT 25 POS Solder RA Thru-Hole 25 Terminal 1 Port RoHS : Not Compliant |
| 43 | |
![]() Newark | 1971567-2 | TE Connectivity | Connector, Mini Hermaphroditic, 4Way; |Te Connectivity 1971567-2 RoHS : Compliant |
| 5,750 | |
| MP005672 | SPC Multicomp | Res N/W, Isolated, 51R, 0.063W, 1206; |Multicomp Pro MP005672 RoHS : Compliant |
| 5,000 | ||
| B65672B0000T001 | TDK Corporation | Transformer Coil Former, P26 X 16; |Tdk B65672B0000T001 RoHS : Compliant |
| 1,693 | ||
| MP015672 | SPC Multicomp | Cbl Gland, M16X1.5, 5-10Mm, Nylon, White; |Multicomp Pro MP015672 RoHS : Compliant |
| 1,005 | ||
| 229567-2114 | Molex | Cable Assy, Tpa2 Lmf Skt-Free End, 0.3M; |Molex 229567-2114 RoHS : Compliant |
| 340 | ||
| 45-672 | Ideal Industries Inc | Wire Stripper, 24-30Awg; |Ideal 45-672 RoHS : Not Compliant |
| 183 | ||
| MP005672 | SPC Multicomp | Res N/W, Isolated, 51R, 0.063W, 1206; |Multicomp Pro MP005672 RoHS : Compliant |
| 100 | ||
| 456720 | Allit Company Group | Euro Container, 400X300X120Mm, Blu/Gry; |Allit 456720 RoHS : Compliant |
| 64 | ||
| 5672A | Pomona Electronics | Test Lead Set, Black, Red, 1.22M, 60V, 1; |Pomona 5672A RoHS : Compliant |
| 25 | ||
| 2-2071567-2 | TE Connectivity | Contactor, Spst-No-Dm, 36Vdc, 250A; |Te Connectivity 2-2071567-2 RoHS : Compliant |
| 23 | ||
| 5672 | Kitronik Ltd | Halo Board, 3.5 To 5V, Bbc Micro:Bit; |Kitronik 5672 RoHS : Compliant |
| 21 | ||
| 05056724001 | Wera | Pozidriv Bit, Size Pz3, 25Mm; |Wera 05056724001 (Alternate Part Number: 4013288034502 RoHS : Compliant |
| 9 | ||
| FDS5672 | onsemi | Mosfet, N Ch, 60V, 12A, Soic; |Onsemi FDS5672 RoHS : Compliant |
| 1 | ||
| FDS5672 | onsemi | Mosfet, N Ch, 60V, 12A, Soic; |Onsemi FDS5672 RoHS : Compliant |
| 1 | ||
| 5672 | Adafruit Industries | Esp32-C6-Devkitc-1-N8 - 8Mb Spi Flash |Adafruit 5672 RoHS : Not Compliant |
| 0 | ||
![]() RS | 1725672 (MPT 0 5/ 4-2 54) | Phoenix Contact | PCB TERMINAL SCREW 2.54MM 20AWG 160V 6A 4 POSITION COMBICON MPT SERIES |
| 470 | |
| ECK200AAAPA (1-2071567-2) | TE Connectivity | HIGH-VAGE DC CONTACTOR FOR ELECTRIC VEHICLE CHARGING, SOLAR, STORAGE AND AUTOMAT |
| 24 | ||
| ECK250AAAPA (2-2071567-2) | TE Connectivity | HIGH-VAGE DC CONTACTOR FOR ELECTRIC VEHICLE CHARGING, SOLAR, STORAGE AND AUTOMAT |
| 24 | ||
| 2056721 | RS Pro | HIGH SPEED COGGED V DRIVE BELT, RUBBER, BLACK, 45.27 IN (1150 MM) LENGTH |
| 5 | ||
| 2056723 | RS Pro | HIGH SPEED COGGED V DRIVE BELT, RUBBER, BLACK, 36.57 IN (929 MM) LENGTH |
| 4 | ||
| 13056722 | Southwire Company LLC | UNDERGROUND FEEDER AND BRANCH CIRCUIT CABLE, 10-2 UF W/G, GRAY |
| 3 | ||
| 13056721 | Southwire Company LLC | UNDERGROUND FEEDER AND BRANCH CIRCUIT CABLE,10-2 UF W/G, GRAY |
| 3 | ||
| 2453567 (25533700) (HFI807503001NA-025RS) | RS Pro | 3/4-16 X 3 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, FINE |
| 2 | ||
| H56721 | Siemens | TALON SLIDING PLATE FOR K BASE- STEEL ; H56721 |
| 1 | ||
| 45-672 | Ideal Industries Inc | WIRE STRIPPER; 24-30 AWG; INCL LB-1002 BLADE |
| 1 | ||
| 2056725 | RS Pro | HIGH SPEED COGGED V DRIVE BELT, RUBBER, BLACK, 39.37 IN (1000 MM) LENGTH |
| 1 | ||
| 2456728 (25533787) (EBI203103000-050RS) | RS Pro | 5/16-18 X 3 IN ELEVATOR BOLT, GRADE 2, ZINC PLATED, COARSE |
| 1 | ||
| 2456727 (25533786) (EBI203102500-050RS) | RS Pro | 5/16-18 X 2 1/2 IN ELEVATOR BOLT, GRADE 2, ZINC PLATED, COARSE |
| 1 | ||
| 2454567 (25533390) (HFI503701750NA-050RS) | RS Pro | 3/8-24 X 1 3/4 IN HEX HEAD CAP SCREW, GRADE 5, ZINC PLATED, FINE |
| 1 | ||
| 5672 | Adafruit Industries | ESP32-C6-DEVKITC-1-N8 - 8MB SPI FLASH |
| 0 | ||
![]() Microchip Technology Inc | JANTX2N5672 | Microchip Technology Inc | Power BJT _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 708 | |
| JANTXV2N5672 | Microchip Technology Inc | Power BJT _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 589 | ||
| 2N5672 | Microchip Technology Inc | Power BJT _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 438 | ||
| MS2N5672 | Microchip Technology Inc | Power BJT _ TO-3, Projected EOL: 2049-02-05 - Contact for Pricing RoHS : Compliant | 0 | |||
| JAN2N5672 | Microchip Technology Inc | Power BJT _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 2C5672-MSCL | Microchip Technology Inc | Power BJT _ Die, Projected EOL: 2049-02-05 |
| 0 | ||
![]() Bisco Industries | 5672-006-90 | Seastrom Mfg | 2,570 | |||
| 5672-018-70 | Seastrom Mfg | 2,500 | ||||
| 5672-007-90 | Seastrom Mfg | 2,010 | ||||
| 5672-133-70 | Seastrom Mfg | 555 | ||||
| 5672-907-70 | Seastrom Mfg | 500 | ||||
| MS35672-34 | MS Pins | 345 | ||||
| MS35672-1 | Indiana Aircraft Hardware | 217 | ||||
| 5672-006 BN70 | O-RINGS | 201 | ||||
| 130-005-6-72 | Dunbar | 95 | ||||
| 5672-007-70 | Seastrom Mfg | 88 | ||||
| MS35672-22 | MS Pins | 15 | ||||
| MS35672-1 | MS Pins | 8 | ||||
| MS35672-23 | MS Pins | 1 | ||||
| MS35672-16 | MS Pins | 1 | ||||
| 56-721-015 | MISC. INDUSTRIAL CONNECTORS | 1 | ||||
![]() Onlinecomponents.com | 794-5672 | WAGO Innovative Connections | WMB marking card - as card - Marked - L1, L2, L3, N, Pe, - (20x) - stretchable 5 - 5.2 mm - Vertical marking - snap-on type - white RoHS : Compliant |
| 5 | |
| 155850-5672 | ITT Interconnect Solutions | Connector Miniature Circular Socket 6 Position Solder Cup Straight Flange Mount 6 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 121575-5672 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| 793-5672 | WAGO Innovative Connections | RoHS : Compliant |
| 0 | ||
| 155000-5672 | ITT Interconnect Solutions | Connector Circular Housing PIN 7 Position 6 Shell Size Olive Drab Cadmium Aluminum |
| 0 | ||
| 5672-SL005 | Alpha Wire | Slate - 30.48m (100ft)/Spool RoHS : Compliant |
| 0 | ||
| 5672-I | Brady Worldwide Inc |
| 0 | |||
| 5672-O | Brady Worldwide Inc |
| 0 | |||
| 5672-SL001 | Alpha Wire | Slate - 304.8m (1000ft)/Spool RoHS : Compliant |
| 0 | ||
| 5672-II | Brady Worldwide Inc | B689 5672-II WHT/GRN STYLE |
| 0 | ||
| 5672-SL002 | Alpha Wire | Slate - 152.4m (500ft)/Spool RoHS : Compliant |
| 0 | ||
| 5672-SL199 | Alpha Wire | 5672 SLATE BULK FT RoHS : Compliant |
| 0 | ||
| 71308-5672 | Molex | CGrid SMT Bkwy Hdr Tin 72Ckt Tubew/VC RoHS : Compliant |
| 0 | ||
| 151117-5672 | Molex | RoHS : Compliant |
| 0 | ||
| 5672-SLATE-1000 | Alpha Wire | Slate - 304.8m (1000ft)/Spool RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | DSPB56720AG | NXP Semiconductors | Digital Signal Processor Audio Processor Host Interface, I²C, SAI, SPI 200MHz 144-QFP Tray RoHS : Compliant |
| 240 | |
| DSPB56721AG | NXP Semiconductors | Digital Signal Processor Audio Processor Host Interface, I²C, SAI, SPI 200MHz 144-QFP Tray RoHS : Compliant |
| 151 | ||
UCC5672PWP![]() | Texas Instruments | IC SCSI, LVD, SE 9 LINE TERM 2.7V - 5.25V 28-SOP Tube RoHS : Compliant |
| 22 | ||
DAC5672MPFBREP![]() | Texas Instruments | IC DAC 2 CONV 14Bits Current Source Parallel 48-QFP T/R RoHS : Compliant |
| 1 | ||
DAC5672IPFBR![]() | Texas Instruments | IC DAC 2 CONV 14Bits Current Source Parallel 48-QFP T/R RoHS : Compliant |
| 137,366 | ||
DAC5672IPFB![]() | Texas Instruments | IC DAC 2 CONV 14Bits Current Source Parallel 48-QFP Tray RoHS : Compliant |
| 7,965 | ||
DAC5672MPFBEP![]() | Texas Instruments | IC DAC 2 CONV 14Bits Current Source Parallel 48-QFP Tray RoHS : Compliant |
| 253 | ||
UCC5672PWPTR![]() | Texas Instruments | IC SCSI, LVD, SE 9 LINE TERM 2.7V - 5.25V 28-SOP T/R RoHS : Compliant |
| 22,745 | ||
| UCC5672MWP | Unitrode Corporation | IC SCSI, LVD, SE 9 LINE TERM 2.7V - 5.25V 36-SOP Rail RoHS : Compliant |
| 1,475 | ||
| UCC5672MWPTR | Unitrode Corporation | IC SCSI, LVD, SE 9 LINE TERM 2.7V - 5.25V 36-SOP T/R RoHS : Compliant |
| 3,000 | ||
| UCC5672PWP | Unitrode Corporation | IC SCSI, LVD, SE 9 LINE TERM 2.7V - 5.25V 28-SOP Tube RoHS : Compliant |
| 48 | ||
![]() Sager | 2335672-1 | TE Connectivity | Bench Top Tools DIE, BRAID RoHS : Compliant | 0 | ||
| 567271-1 | TE Connectivity | Other Tools HDMSMPO11OF1550T | 0 | |||
| 0014567241 | Molex | Headers & Wire Housings SL IDT Opt D Female 22AWG Tin 24Ckt RoHS : Compliant | 0 | |||
| 1SNA235672R0000 | TE Connectivity | DIN Rail Terminal Blocks LHA1567 RoHS : Compliant |
| 0 | ||
| 1056729-1 | TE Connectivity | RF Connectors / Coaxial Connectors 2998 5028 02 RoHS : Compliant | 0 | |||
| 0014567231 | Molex | Headers & Wire Housings SL IDT Opt D Female 22AWG Tin 23Ckt RoHS : Compliant | 0 | |||
| 1-102567-2 | TE Connectivity | Board to Board & Mezzanine Connectors MODII 2PC HDR RoHS : Not Compliant |
| 0 | ||
| 1567238 | Phoenix Contact | Sensor Cables / Actuator Cables SAC-4P-M12MS/ 1,5-800/M12FR RoHS : Compliant |
| 0 | ||
| 1567283 | Phoenix Contact | Sensor Cables / Actuator Cables SAC-4P-M12MS/ 2,0-800/M12FS RoHS : Compliant |
| 0 | ||
| 1045672-1 | TE Connectivity | RF Connectors / Coaxial Connectors SSMA ST PCB-JCK STD T/H RoHS : Compliant |
| 0 | ||
| 1056722-1 | TE Connectivity | RF Connector Accessories 2998 5002 02 RoHS : Compliant | 0 | |||
| 0014567255 | Molex | CGRID SL IDT OPT C 15SAU 25CKT |
| 0 | ||
387005672![]() | Tark Thermal Solutions | Thermoelectric Peltier Modules PowerCycling PCX Series, Thermoelectric Coolers, 38 W cooling power, RTV perimeter seal RoHS : Compliant |
| 0 | ||
| 656724-1 | TE Connectivity | Bench Top Tools STUFFER BLADE REAR 2.5 | 0 | |||
| 567257-3 | TE Connectivity | Bench Top Tools HDM SMPR070F G | 0 | |||
![]() TME | 1-1969567-2 | TE Connectivity | Connector: wire-wire; plug; female; data; POWER; 7.5A; 250V; PIN: 12 RoHS : Compliant |
| 3,547 | |
| 95672-001LF | Amphenol Communications Solutions | Connector: RJ45; socket; data transfer; PIN: 8; Cat 5; shielded RoHS : Compliant |
| 657 | ||
| 1656725 | Phoenix Contact | Connector: RJ45; plug; data transfer; Variosub; PIN: 8; Cat 5e; 8p8c RoHS : Compliant |
| 354 | ||
| 05056722001 | Wera | Screwdriver bit: Pozidriv®; PZ2; 1/4"; Overall len: 25mm |
| 3 | ||
| 65672 | Delock | Cable; Jack 2.5mm 3pin angled plug,Jack 3.5mm 3pin socket |
| 3 | ||
| 2567.200 | Rittal | Cable gland plate |
| 2 | ||
| 2567230000 | Weidmüller Interface GmbH & Co. KG | Connector: PCB terminal block; power supply; OMNIMATE; 20A,32.5A RoHS : Compliant |
| 0 | ||
1856720000![]() | Weidmüller Interface GmbH & Co. KG | 1856720000 RoHS : Compliant |
| 0 | ||
| 5672 SL005 | Alpha Wire | Wire; Xtra Guard® 1; 10x26AWG; unshielded; 300V; 30.5m; Cu |
| 0 | ||
| 5672696010 | TE Connectivity | Heat shrink sleeve; flexible; 10mm; transparent; -30÷125°C RoHS : Compliant |
| 0 | ||
| 6456720 | Gedore Torque Ltd | Hammer; 300mm; round; steel; wood (ash); Ø: 40mm |
| 0 | ||
| 935156722510-T3S | Murata Manufacturing Co Ltd | Capacitor: silicon; 10nF; 30V; ±15%; -55÷150°C; ULSC; 0.6x0.3x0.1mm RoHS : Compliant |
| 0 | ||
| 5672 SL001 | Alpha Wire | Wire; Xtra Guard® 1; 10x26AWG; unshielded; 300V; 305m; Cu; stranded |
| 0 | ||
| 6567200 | Gedore Torque Ltd | Screwdriver bit: slot; 5.5x1.6mm; 5/16"; Overall len: 41mm |
| 0 | ||
| 935156723410-T3N | Murata Manufacturing Co Ltd | Capacitor: silicon; 1nF; 30V; ±15%; -55÷150°C; ULSC; 0.8x0.6x0.1mm |
| 0 | ||
![]() ComSIT USA | FDS5672![]() | Fairchild Semiconductor Corporation | 60V, 12A, 10 MILLI OHM N-CHANNEL POWERTRENCH MOSFET Power Field-Effect Transistor, 12A I(D), 60V, 0.01ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 598 | ||
| 95672001LF | Amphenol FCi | R/A GANG JACK FILTER ASSY 8 POS SHIELDED SNAP PER Telecom and Datacom Connector, 8 Contact(s), Female, Right Angle, Solder Terminal, Locking, Jack RoHS : Compliant | 144 | |||
UCC5672PWP![]() | Texas Instruments | MULTIMODE (LVD/SE) SCSI 9 LINE TERMINATOR SCSI Terminator, 9-Line, 105ohm, BICMOS, PDSO28 RoHS : Not Compliant | 50 | |||
JANTX2N5672![]() | Microsemi Corporation (now Microchip) | SEMICONDUCTOR DEVICE, TRANSISTOR, NPN, SILICON, HIGH-POWER Power Bipolar Transistor, 30A I(C), 120V V(BR)CEO, 1-Element, NPN, Silicon, TO-204AA, Metal, 2 Pin RoHS : Not Compliant | 48 | |||
| QL30120PFN100I5672 | QuickLogic Corporation | 12,000 USABLE PLD GATE PASIC 3 FPGA COMBINING HIGH PERFORMANCE AND HIGH DENSITY Field Programmable Gate Array, 320 CLBs, 12000 Gates, 225MHz, 320-Cell, CMOS, PQFP100 RoHS : Compliant | 10 | |||
![]() Interstate Connecting Components | 155672-0130 | ITT Interconnect Solutions | MKJ4C4F7-10DD | 0 | ||
| ZPF000000000205672 | TE Connectivity | DMC-M 88 AW 01 | 0 | |||
| 1-102567-2 | TE Connectivity | 40 MODII 2PC HDR DR SHRD .100 RoHS : Not Compliant |
| 0 | ||
| 155672-1141 | ITT Interconnect Solutions | MKJ4C4W7-10B | 0 | |||
| 155672-3130 | ITT Interconnect Solutions | MKJ4C4T7-10DD | 0 | |||
| 1045672-1 | TE Connectivity | 1062 0000 00 RoHS : Compliant |
| 0 | ||
| 155672-0140 | ITT Interconnect Solutions | MKJ4C4F7-10D | 0 | |||
| 155672-3101 | ITT Interconnect Solutions | MKJ4C4T7-10BA | 0 | |||
| 019-8567-240 | ITT Interconnect Solutions | 019-8567-240 | 0 | |||
| 1544567-2 | TE Connectivity | 2POS,NG1 CLIP 8MM,REC HSG,UNSE RoHS : Compliant | 0 | |||
| 155672-1100 | ITT Interconnect Solutions | MKJ4C4W7-10DA | 0 | |||
| 155672-3131 | ITT Interconnect Solutions | MKJ4C4T7-10BD | 0 | |||
| 011-8567-241 | ITT Interconnect Solutions | 011-8567-241 | 0 | |||
| 5672696001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCTSAS-NR502-X-25MM RoHS : Compliant | 0 | |||
| 936567-2 | TE Connectivity | JPT 2P ASSY FOR LPI INJECTOR RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | MCA105672-120 | Amphenol Limited |
| 0 | ||
| S556722-1000S52 | SOURIAU-SUNBANK |
| 0 | |||
| S556722-1001S52 | SOURIAU-SUNBANK |
| 0 | |||
| 45-672 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| 10-628485-672A | Amphenol Corporation |
| 0 | |||
| S556722-1200S52 | SOURIAU-SUNBANK |
| 0 | |||
| S556722-0600S52 | SOURIAU-SUNBANK |
| 0 | |||
| MCA105672-288 | Amphenol Limited |
| 0 | |||
| S556722-0601S52 | SOURIAU-SUNBANK |
| 0 | |||
| SGM26MDS3NSS0000/AA-15-672.0 | Amphenol Positronic |
| 0 | |||
| 163B5672 | SOURIAU-SUNBANK |
| 0 | |||
![]() PUI | 12.85672 | 10 | ||||
![]() Richardson RFPD | 935275672118![]() | NXP Semiconductors | I2C Interface 100kHz 6V 20-Pin SSOP T/R RoHS : Compliant | 0 | ||
| 1045672-1 | TE Connectivity | Conn SSMA 0Hz to 18GHz 50Ohm Solder ST Thru-Hole R RoHS : Compliant | 0 | |||
| 56-723-005-LI | Spectrum Control | 25/25 SOCKET D-SUB FILT CONN RoHS : Compliant |
| 0 | ||
| 56-724-004 | Spectrum Control | Conn D-Sub SKT 25 POS Solder RA Thru-Hole 25 Termi RoHS : Not Compliant |
| 0 | ||
| 56-725-003-LI | Spectrum Control | Conn D-Sub Adapter M/F 25/25 POS ST Panel Mount 1/ |
| 0 | ||
| AD5672RBCPZ-REEL7 | Analog Devices Inc | DAC 8-CH Segment 12-bit 20-Pin LFCSP EP T/R RoHS : Compliant |
| 0 | ||
| 935156722456-T3S | Murata Manufacturing Co Ltd | Cap Silicon 0.0056uF 60ppm/C 15% SMD 0201M 150C T/ RoHS : Compliant | 0 | |||
| 105672-HMC427LP3 | Analog Devices Inc | HMC427LP3/HMC427LP3E RF Switch Evaluation Board RoHS : Compliant | 0 | |||
| CVCO55CC-2567-2741 | Crystek Corporation | VoltageControlled Oscillator VCO RoHS : Compliant | 0 | |||
| 415672-1 | TE Connectivity | Conn SMB 0Hz to 4GHz 50Ohm Solder RA Thru-Hole RCP RoHS : Compliant | 0 | |||
| 935455672598 | NXP Semiconductors | 3400-3800 MHz RF Top-Side Cooling Evaluation Board |
| 0 | ||
| 56-723-003-GBL6 | Spectrum Control | Conn D-Sub SKT 25 POS Solder ST Thru-Hole 25 Termi |
| 0 | ||
| 56-725-001 | Spectrum Control | Conn Filtered D-Sub Adapter PIN/SKT 25/25 POS ST 1 RoHS : Not Compliant |
| 0 | ||
| AD5672RBRUZ | Analog Devices Inc | DAC 8-CH Segment 12-bit 20-Pin TSSOP Tube RoHS : Compliant |
| 0 | ||
| FDS5672 | onsemi | Trans MOSFET N-CH 60V 12A 8-Pin SOIC T/R RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | FDMS5672 | INSTOCK | 2,793 | |||
| OA5672.01/096 | INSTOCK | 448 | ||||
| 552567-2 | TE Connectivity | INSTOCK | 146 | |||
| MG655672-4 | INSTOCK | 20 | ||||
| 12.85672 | Geyer Electronic E K | INSTOCK | 10 | |||
| MT18HVF25672PY-667E1 | Microchip Technology Inc | INSTOCK | 7 | |||
| 1725672- | Phoenix Contact | INSTOCK | 1 | |||
![]() Avnet Abacus | 1725672 | Phoenix Contact | WireToBoard Terminal Block 254 mm 4 Ways 26 AWG 20 AWG 05 mm Screw (Alt: 1725672) RoHS : Compliant | 3,750 | ||
| 1656725 | Phoenix Contact | Modular Connector RJ45 Plug 1 x 1 Port 8P8C Cat5 IP20 Cable Mount (Alt: 1656725) RoHS : Compliant | 3 | |||
| 1056729-1 | TE Connectivity | (Alt: 1056729-1) RoHS : Compliant | 0 | |||
| 1045672-1 | TE Connectivity | (Alt: 1045672-1) RoHS : Compliant | 0 | |||
| 1045672-1 | TE Connectivity | (Alt: 1045672-1) RoHS : Compliant | 0 | |||
| 1056722-1 | TE Connectivity | (Alt: 1056722-1) RoHS : Compliant | 0 | |||
| 6457567-2 | TE Connectivity | Conn LC Adapter Multimode Duplex RCPRCP ST Panel Mount 02dB (Alt: 6457567-2) RoHS : Compliant | 0 | |||
| B65672BT1 | TDK Corporation | (Alt: B65672B0000T001) RoHS : Compliant | 0 | |||
| 5672694009 | TE Connectivity | (Alt: 5672694009) RoHS : Compliant | 0 | |||
| 5672860013 | TE Connectivity | (Alt: 5672860013) RoHS : Compliant | 0 | |||
| ED5672-000 | TE Connectivity | ZType Cable Marker PushOn Pre Printed Y Legend PVC White Box (Alt: ED5672-000) RoHS : Compliant | 0 | |||
| 2-6457567-2 | TE Connectivity | (Alt: 2-6457567-2) RoHS : Compliant | 0 | |||
| 3-1437567-2 | TE Connectivity | (Alt: 3-1437567-2) RoHS : Compliant | 0 | |||
| 1SNA235672R0000 | TE Connectivity | Self Adhesive Label Holder Polyamide Black (Alt: 1SNA235672R0000) RoHS : Compliant | 0 | |||
| 935156722456-T3S | Murata Manufacturing Co Ltd | (Alt: 935156722456-T3S) RoHS : Compliant | 0 | |||
![]() Avnet Asia | FDS5672 | onsemi | (Alt: FDS5672) RoHS : Compliant |
| 0 | |
| 2-2071567-2 | TE Connectivity | Contactor SPST-NO-DM 9VDC to 36VDC 250A (Alt: 2-2071567-2) RoHS : Compliant | 0 | |||
| 3-125-672 | Schurter Electronic Components | Rear Cover for Power Entry Module Shape A (Alt: 3-125-672) RoHS : Compliant | 0 | |||
| 1-2071567-2 | TE Connectivity | Contactor SPST-NO-DM 9VDC to 36VDC 200A (Alt: 1-2071567-2) RoHS : Compliant | 0 | |||
![]() Avnet Silica | DSPB56720AG | NXP Semiconductors | DSP Fixed Point 24bit 200 MHz LQFP 144 Pins (Alt: DSPB56720AG) RoHS : Compliant | 120 | ||
| 2N5672 | Microchip Technology Inc | (Alt: 2N5672) RoHS : Not Compliant | 0 | |||
| FDS5672 | onsemi | NChannel PowerTrench MOSFET 60V 12A 10mO (Alt: FDS5672) RoHS : Compliant | 0 | |||
| FDMS5672 | onsemi | NChannel UltraFET Trench MOSFET 60V 22A 115mO (Alt: FDMS5672) RoHS : Compliant | 0 | |||
| DSPB56724AG | NXP Semiconductors | Digital Signal Processor Dual Core 250 MHz 114 V to 126 V LQFP144 (Alt: DSPB56724AG) RoHS : Compliant | 0 | |||
| JANTX2N5672 | Microchip Technology Inc | (Alt: JANTX2N5672) RoHS : Compliant | 0 | |||
| DSPB56725AF | NXP Semiconductors | Audio Processor Dual Core Serial I2CSPI 80Pin LQFP Tray (Alt: DSPB56725AF) RoHS : Compliant | 0 | |||
| DSPB56725CAF | NXP Semiconductors | MultiCore Audio Processor 80Pin LQFP Tray (Alt: DSPB56725CAF) RoHS : Compliant | 0 | |||
| DSPB56720CAG | NXP Semiconductors | (Alt: DSPB56720CAG) RoHS : Compliant | 0 | |||
| IS61NVP25672-250B1L | Integrated Silicon Solution Inc | 18 MB SRAM (Alt: IS61NVP25672-250B1L) RoHS : Compliant | 0 | |||
| MX25U25672GZNI40/TR | Macronix International Co Ltd | NOR Flash 256Mbit 256M X 1bit128M X 2bit64M X 4bit Serial 18V 5ns 8Pin WSON (Alt: MX25U25672GZNI40/TR) RoHS : Compliant | 0 | |||
| ISL95833BHRTZ-TR5672 | Renesas Electronics Corporation | (Alt: ISL95833BHRTZ-TR5672) RoHS : Compliant | 0 | |||
| IS61NLP25672-200B1LI | Integrated Silicon Solution Inc | (Alt: IS61NLP25672-200B1LI) RoHS : Compliant | 0 | |||
| MT18HTS25672PKY-667G1 | Micron Technology Inc | DRAM Module DDR2 SDRAM 2Gbyte 244MiniRDIMM Tray (Alt: MT18HTS25672PKY-667G1) RoHS : Compliant | 0 | |||
| FP15672_STRADA-2X2MXS-T4-B | LEDIL | (Alt: FP15672_STRADA-2X2MXS-T4-B) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | AD5672RBCPZ-REEL7 | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,730 | |
| 749567-2 | TE Connectivity | IN STOCK SHIP TODAY |
| 1,443 | ||
UCC5672PWPTRG4![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,093 | ||
| 1-102567-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 545 | ||
| 56-724-053 | SCI | IN STOCK SHIP TODAY | 151 | |||
| 95672-001 | Amphenol FCi | IN STOCK SHIP TODAY |
| 105 | ||
| UCC5672PWP | Unitrode Corporation | IN STOCK SHIP TODAY |
| 85 | ||
| 3-1437567-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| MM5672BN | National Semiconductor Corporation | IN STOCK SHIP TODAY | 2 | |||
| 56-725-003-LI | SCI | IN STOCK SHIP TODAY |
| 1 | ||
2N5672![]() | RCA | IN STOCK SHIP TODAY |
| 1 | ||
![]() EBV Elektronik | DSPB56720AG | NXP Semiconductors | DSP Fixed Point 24bit 200 MHz LQFP 144 Pins (Alt: DSPB56720AG) RoHS : Compliant | 120 | ||
| 2N5672 | Microchip Technology Inc | (Alt: 2N5672) RoHS : Compliant | 0 | |||
| FDS5672 | onsemi | NChannel PowerTrench MOSFET 60V 12A 10mO (Alt: FDS5672) RoHS : Compliant | 0 | |||
| FDMS5672 | onsemi | NChannel UltraFET Trench MOSFET 60V 22A 115mO (Alt: FDMS5672) RoHS : Compliant | 0 | |||
| DSPB56724AG | NXP Semiconductors | Digital Signal Processor Dual Core 250 MHz 114 V to 126 V LQFP144 (Alt: DSPB56724AG) RoHS : Compliant | 0 | |||
| DSPB56725AF | NXP Semiconductors | Audio Processor Dual Core Serial I2CSPI 80Pin LQFP Tray (Alt: DSPB56725AF) RoHS : Compliant | 0 | |||
| DSPB56720CAG | NXP Semiconductors | (Alt: DSPB56720CAG) RoHS : Compliant | 0 | |||
| FP15672_STRADA-2X2MXS-T4-B | LEDIL | (Alt: FP15672_STRADA-2X2MXS-T4-B) RoHS : Compliant | 0 | |||
![]() Flip Electronics | DSPB56725CAF | NXP Semiconductors | Stock RoHS : Compliant | 2,219 | ||
| KDSPB56725CAF | NXP Semiconductors | Stock, Ship Today |
| 1,774 | ||
| DSPB56720AG | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 730 | ||
| DSPB56720CAG | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 647 | ||
| DSPB56721AF | NXP Semiconductors | Stock RoHS : Compliant | 29 | |||
![]() Master Electronics | 2335672-1 | TE Connectivity | DIE BRAID RoHS : Compliant |
| 0 | |
| 011567224 | TE Connectivity | ABB-CONNECTION - SNA SERIES SCREW TERMINAL BLOC RoHS : Compliant |
| 0 | ||
| 1SNA235672R0000 | TE Connectivity | LHA1567 RoHS : Compliant |
| 0 | ||
| 155672-0130 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| ZPF000000000205672 | TE Connectivity | DMC-M 88 AW 01 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1-102567-2 | TE Connectivity | 40 MODII 2PC HDR DR SHRD .100 RoHS : Not Compliant |
| 0 | ||
| 155672-1141 | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| 155672-3130 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| 1567238 | Phoenix Contact | Sensor/actuator cable - 4-position - PUR halogen-free - resistant to welding sparks - highly flexible - gray RAL 7001 - Plug straight M12 - A-coded - on Socket angled M12 - A-coded - cable length: 1.5 m - for robots and drag chains RoHS : Compliant |
| 0 | ||
| 1567283 | Phoenix Contact | SAC-4P-M12MS/ 2 0-800/M12FS RoHS : Compliant |
| 0 | ||
| 1045672-1 | TE Connectivity | 1062 0000 00 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 65672002 | TE Connectivity | TAT-125-1-9-STK MOQ Reduction RoHS : Compliant |
| 0 | ||
| 656724-1 | TE Connectivity | STUFFER BLADE REAR 2.5 RoHS : Compliant |
| 0 | ||
| 2-6457567-2 | TE Connectivity | ADPTR DUP LC SR BLU CER LOGO MOQ Reduction RoHS : Compliant |
| 0 | ||
| 155672-0140 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE33567-24 | Pasternack Enterprises | Key Specifications (Click on Data Sheet Above for Additional Details) .Connector Series 1BNCConnector Gender 1MaleConnector Polarity 1StandardConnector Angle 1StraightConnector Mount Method 1NoneConnector Impedance 150Connector Series 2Unterminated LeadConnector Gender 2SexlessConnector Polarity 2StandardConnector Angle 2StraightConnector Mount Method 2NoneConnector Impedance 20RF Cable Part NumberRG59B/URF Cable TypeRG59RF Cable Impedance75. BNC Male to Unterminated Lead Cable 24 Inch Length Using 75 Ohm RG59 Coax. Very low frequency equipment test lead cable assembly PE33567-24 from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a BNC cable connector on side 1. Our BNC test lead assembly has a unterminated lead connector on side 2. BNC to BNC RF test equipment lead cable is manufactured with male gender for side 1 and sexless for side 2. BNC male to unterminated lead sexless cable test lead for RF is constructed with RG59 cable and the impedance is 75 Ohm. PE33567-24 BNC male to unterminated lead sexless test equipment lead using RG59 cable has a 24 inch length. Pasternack BNC to unterminated lead RG59 very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with BNC to unterminated lead connectors and RG59 cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. |
| 1,288 | |
| PE3C6056-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. Fire Rated BNC Male to BNC Male Cable 72 Inch Length Using LMR-200-FR Coax With Times Microwave Parts., Radio frequency assembly fire rated BNC male to BNC male cable 72 inch length using LMR-200-FR coax with Times Microwave parts from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Fire rated BNC male to BNC male cable 72 inch length using LMR-200-FR coax with Times Microwave parts, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C6056-72, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C6056-72 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated BNC male to BNC male cable 72 inch length using LMR-200-FR coax with Times Microwave parts. |
| 215 | ||
| PE45672 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: NEX10, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: PE-1/4SFHC, Interface Type 2: SPP-250-LLPL, Interface Type 3: SPO-250, Interface Type 4: SPF-250. NEX10 Male Low PIM Quick Lock Connector Solder Attachment for PE-1/4SFHC, SPP-250-LLPL, SPO-250, SPF-250. PE45672 NEX10 male coaxial quick lock connector has an interface type of PE-1/4SFHC, SPP-250-LLPL, SPO-250, SPF-250 and a 50 Ohm impedance. Pasternack NEX10 male connector uses shield/contact solder/solder as an attachment method. Our male NEX10 coaxial connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack NEX10 male coaxial quick lock connector has a PTFE dielectric type. The Pasternack NEX10 coaxial connector has a brass body with tri-metal plating. Our PE45672 NEX10 connector uses brass contact. This NEX10 male coaxial quick lock RF connector is RoHS and REACH compliant. This Pasternack male NEX10 connector will ship the same day as purchased. Our NEX10 male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom NEX10 connector cable assemblies that will ship the same day as well. |
| 56 | ||
| PE356-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141, RF Cable Type: PE-P141, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMA Female to N Male Precision Cable 72 Inch Length Using PE-P141 Coax, RoHS., Radio frequency assembly SMA female to N male precision cable 72 inch length using PE-P141 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to N male precision cable 72 inch length using PE-P141 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our precision SMA to N type cable assemblies have a female gender on end 1 and male on end 2. This SMA to type N cable is a female to male coax assembly, PE356-72, can also be known as a precision SMA jack to N type plug cable assembly and will be shipped same-day as it is purchased. SMA jack to type N plug cable assembly PE356-72 is built with PE-P141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency SMA female to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE356-72 can also be used in the other direction and will be type N male to SMA female cable assembly if the opposite connectivity is required. Precision SMA jack to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to N male precision cable 72 inch length using PE-P141 coax, RoHS. |
| 23 | ||
| PE36156-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMP Female to SMP Female Right Angle Cable 72 Inch Length Using PE-SR047FL Coax., Radio frequency assembly SMP female to SMP female right angle cable 72 inch length using PE-SR047FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female to SMP female right angle cable 72 inch length using PE-SR047FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and right angle SMP cable connection on the other. Our SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE36156-72, can also be known as a SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE36156-72 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36156-72 can also be used in the other direction and will be right angle SMP female to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMP female right angle cable 72 inch length using PE-SR047FL coax. |
| 16 | ||
| PE3MSA00567-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. Lead Free TRB Threaded Plug with Blunt Cut for PE-30-02001, 24" Cable., Radio frequency assembly lead free TRB threaded plug with blunt cut for PE-30-02001, 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free TRB threaded plug with blunt cut for PE-30-02001, 24" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MSA00567-24 can also be known as a 1553 TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MSA00567-24 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00567-24 can also be used in the other direction and will be blunt cut genderless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free TRB threaded plug with blunt cut for PE-30-02001, 24" cable. |
| 13 | ||
| PE3W10956-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. HN Male to HN Female Cable 72 Inch Length Using RG214 Coax., Radio frequency assembly HN male to HN female cable 72 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to HN female cable 72 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom HN to HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a HN cable connection on one end and a HN cable connection on the other. Our HN to HN cable assembly has a male gender on end 1 and a female on end 2. PE3W10956-72 can also be known as a HN plug to HN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10956-72 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -20 to 80 degrees C. The flexible RF cable has an in-series connection. Our HN male to HN female cable has a maximum VSWR of 1.4:1. HN plug to HN jack cable assembly PE3W10956-72 is built with RG214 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10956-72 can also be used in the other direction and will be a HN female to HN male cable assembly if the opposite connectivity is required. HN plug to HN jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal HN to HN RF cable assembly as per your requirements. |
| 0 | ||
| PE3756-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMA Male Right Angle to BNC Male Cable 72 Inch Length Using RG188 Coax., Radio frequency assembly SMA male right angle to BNC male cable 72 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to BNC male cable 72 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and BNC cable connection on the other. Our right angle SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3756-72, can also be known as a right angle SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3756-72 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3756-72 can also be used in the other direction and will be BNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to BNC male cable 72 inch length using RG188 coax. |
| 0 | ||
| PE33556-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMC Plug to SMC Plug Right Angle Cable 72 Inch Length Using RG174 Coax., Radio frequency assembly SMC plug to SMC plug right angle cable 72 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to SMC plug right angle cable 72 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and right angle SMC cable connection on the other. Our SMC to right angle SMC cable assemblies have a plug gender on end 1 and plug on end 2. This SMC to SMC cable is a plug to plug coax assembly, PE33556-72, can also be known as a SMC male to right angle SMC male cable assembly and will be shipped same-day as it is purchased. SMC male to SMC male cable assembly PE33556-72 is built with RG174 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to right angle SMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMC plug to SMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33556-72 can also be used in the other direction and will be right angle SMC plug to SMC plug cable assembly if the opposite connectivity is required. SMC male to SMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to SMC plug right angle cable 72 inch length using RG174 coax. |
| 0 | ||
| PE3M0156-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 72 inches. Temperature Conditioned SMA Male Right Angle to N Male Low Loss Cable 72 Inch Length Using PE-P142LL Coax., Pasternack temperature conditioned SMA male right angle to N male low loss cable 72 inch length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0156-72 is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability SMA to type N cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with right angle SMA connection on one end and N type connection on the other. Our low loss right angle SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to N type cable is a male to male coax assembly. PE3M0156-72 can also be known as a temperature conditioned low loss right angle SMA plug to type N plug cable assembly and will be shipped the same day after it is purchased. SMA plug to type N plug cable assembly PE3M0156-72 is built with PE-P142LL which is a flexible coax. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency SMA right angle male to type N male cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0156-72 can be used in the other direction and will be type N male to right angle SMA male cable assembly. Pasternack high reliability low loss SMA right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for same-day shipment worldwide. Variations of PE44817 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned SMA male right angle to N male low loss cable 72 inch length using PE-P142LL coax. |
| 0 | ||
| PE3W15672-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. NEX10 Male to 4.3-10 Male Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax with Times Microwave Components., Radio frequency assembly NEX10 male to 4.3-10 male low PIM cable 24 inch length using TFT-5G-402 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to 4.3-10 male low PIM cable 24 inch length using TFT-5G-402 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM NEX10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W15672-24 can also be known as a low PIM NEX10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3W15672-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to 4.3-10 plug cable assembly PE3W15672-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W15672-24 can also be used in the other direction and will be a 4.3-10 male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of NEX10 and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W06756-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. HN Male to SC Male Cable 72 Inch Length Using RG8 Coax., Radio frequency assembly HN male to SC male cable 72 inch length using RG8 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to SC male cable 72 inch length using RG8 coax, HN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to SC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and SC cable connection on the other. Our HN to SC cable assemblies have a male gender on end 1 and male on end 2. PE3W06756-72 can also be known as a HN plug to SC plug cable assembly and will be shipped same-day as it is purchased. HN plug to SC plug cable assembly PE3W06756-72 is built with RG8 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to SC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency HN male to SC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06756-72 can also be used in the other direction and will be SC male to HN male cable assembly if the opposite connectivity is required. HN plug to SC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to SC cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to SC male cable 72 inch length using RG8 coax. |
| 0 | ||
| PE38456-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 72 inches. N Female to QN Male Cable 72 Inch Length Using RG58 Coax., Radio frequency assembly N female to QN male cable 72 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female to QN male cable 72 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to QN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and QN cable connection on the other. Our type N to QN cable assemblies have a female gender on end 1 and male on end 2. This type N to QN cable is a female to male coax assembly, PE38456-72, can also be known as a type N jack to QN plug cable assembly and will be shipped same-day as it is purchased. N type jack to QN plug cable assembly PE38456-72 is built with RG58 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to QN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this N type female to QN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38456-72 can also be used in the other direction and will be QN male to type N female cable assembly if the opposite connectivity is required. Type N jack to QN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to QN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to QN male cable 72 inch length using RG58 coax. |
| 0 | ||
| PE3C5672 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-1/2FAC, RF Cable Type: 1/2" Flexible, RF Cable Impedance: 50 Ohm. N Male to Trimmed Lead Cable Using 1/2 inch Flexible Coax., Radio frequency assembly N male to trimmed lead cable using 1/2 inch flexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to trimmed lead cable using 1/2 inch flexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to trimmed lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and trimmed lead cable connection on the other. Our N type to trimmed lead cable assemblies have a male gender on end 1 and sexless on end 2. This type N to trimmed lead cable is a male to sexless coax assembly, PE3C5672, can also be known as a N type plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. Type N plug to trimmed lead sexless cable assembly PE3C5672 is built with 1/2" flexible which is a corrugated coax type. The Pasternack corrugated N cable assembly is manufactured with type N to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this N type male to trimmed lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5672 can also be used in the other direction and will be trimmed lead sexless to type N male cable assembly if the opposite connectivity is required. Type N plug to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to trimmed lead cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to trimmed lead cable using 1/2 inch flexible coax. | 0 | |||
| PE3W15672-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. NEX10 Male to 4.3-10 Male Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax with Times Microwave Components., Radio frequency assembly NEX10 male to 4.3-10 male low PIM cable 36 inch length using TFT-5G-402 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to 4.3-10 male low PIM cable 36 inch length using TFT-5G-402 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM NEX10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W15672-36 can also be known as a low PIM NEX10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3W15672-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to 4.3-10 plug cable assembly PE3W15672-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W15672-36 can also be used in the other direction and will be a 4.3-10 male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of NEX10 and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
![]() Vyrian | MT18JBF25672PY-1G3XX![]() | Micron Technology Inc | DDR DRAM Module, 512MX4, CMOS | 6,951 | ||
MT18HVS25672KY-80EXX![]() | Micron Technology Inc | Synchronous DRAM Module, 256MX8, CMOS RoHS : Compliant | 6,191 | |||
MT18HTF25672FDY-80EXX![]() | Micron Technology Inc | DDR DRAM Module, 256MX72, CMOS RoHS : Compliant | 5,856 | |||
| MT18HTF25672PDZ-80EH1 | Micron Technology Inc | DDR DRAM Module, 256MX72, 0.4ns, CMOS, PDMA240 RoHS : Compliant | 5,659 | |||
| MT18HVF25672PY-667G1 | Micron Technology Inc | 4,509 | ||||
MT18JBZF25672PDY-1G5XX![]() | Micron Technology Inc | DDR DRAM Module, 256MX8, CMOS | 4,024 | |||
| MT18HVF25672PDY-53E | Micron Technology Inc | Memory IC, 256MX72, CMOS, PDMA240 RoHS : Compliant | 3,883 | |||
MT18HTF25672PY-40E![]() | Micron Technology Inc | DDR DRAM Module, 256MX72, 0.6ns, CMOS RoHS : Compliant | 3,595 | |||
| MT18HTF25672FDY-667A5N4 | Micron Technology Inc | 3,351 | ||||
| MT18HVF25672PY-80EG1 | Micron Technology Inc | 3,308 | ||||
| MT18JBF25672PDY-1G0D1 | Micron Technology Inc | DRAM | 2,965 | |||
MT18HTF25672FDY-667XX![]() | Micron Technology Inc | DDR DRAM Module, 256MX72, CMOS RoHS : Compliant | 2,797 | |||
MT18HVS25672KY-667XX![]() | Micron Technology Inc | Synchronous DRAM Module, 256MX8, CMOS RoHS : Compliant | 2,532 | |||
MT18HTF25672PDZ-667H1![]() | Micron Technology Inc | DDR DRAM Module, 256MX72, 0.45ns, CMOS RoHS : Compliant | 2,385 | |||
MT18HVS25672PKY-53EXX![]() | Micron Technology Inc | Synchronous DRAM Module, 256MX8, CMOS RoHS : Compliant | 2,367 | |||
![]() Win Source Electronics | BQ25672RQMR | Texas Instruments | IC CONTROLLED, 1- TO 4-CELL, 3-A / Charger IC Lithium Ion/Polymer 29-VQFN-HR (4x4) RoHS : Compliant |
| 11,840 | |
FDS5672![]() | Fairchild Semiconductor Corporation | MOSFET N-CH 60V 12A 8-SOIC RoHS : Compliant |
| 5,285 | ||
| ALC5672-VB-CGT | Realtek Semiconductor |
| 4,900 | |||
DAC5672IPFBRG4![]() | Texas Instruments | DAC 2-CH Segment 14-bit 48-Pin TQFP T/R / IC DAC 14BIT DUAL 275MSPS 48TQFP RoHS : Compliant |
| 3,060 | ||
| AD5672RBRUZ-REEL7 | Analog Devices Inc | RoHS : Compliant |
| 3,000 | ||
| AD5672RBRUZ | Analog Devices Inc | Octal, 12-/16-Bit nanoDAC+ with ppm/°C Reference, SPI Interface | IC DAC 12BIT V-OUT 20TSSOP RoHS : Compliant |
| 1,850 | ||
DAC5672IPFB![]() | Texas Instruments | IC DAC 14BIT DUAL 275MSPS 48TQFP RoHS : Compliant |
| 192 | ||
DAC5672IPFBR![]() | Texas Instruments | IC DAC 14BIT DUAL 275MSPS 48TQFP / DAC 2-CH Segment 14-bit 48-Pin TQFP T/R RoHS : Compliant |
| 180 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |