| Electronic Components Datasheet Search |
|
5624 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | MC101825624F | The Heico Companies LLC | Resistor: thick film; 5.62MΩ; 6.35x6.35x0.76mm; -55÷180°C |
| 265 | |
| F25624-000 | TE Connectivity | F25624-000 RoHS : Not Compliant |
| 50 | ||
| OR-PI-456/24UC | ORNO-POLSKA Sp zoo | Relay: installation; bistable; SPDT; Uswitch: max.250VAC; 16A; IP20 |
| 3 | ||
| SL515624Z | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 24; THT; 3A; 250V |
| 0 | ||
| SP276WF5624T1E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 5.62MΩ; SMD; 4527; 6W; ±1%; SP; 300V; -55÷155°C RoHS : Compliant |
| 0 | ||
| SOB562460 | celduc relais | Relay: solid state; 25A; Uswitch: 24÷600VAC; 2-phase; IP00; SOB |
| 0 | ||
| MFAS156-24-C | Pancon Corporation | Connector: wire-board; MAS-CON; socket; male; data; PIN: 24; 3.96mm |
| 0 | ||
| CRT01J7F5624 | Viking Technology | Resistor: thick film; 5.62MΩ; 0201; 50mW; ±5%; CRT; -55÷125°C; 500mA |
| 0 | ||
| CRT03F7E5624 | Viking Technology | Resistor: thick film; 5.62MΩ; 0603; 100mW; ±1%; CRT; -55÷155°C; 1A |
| 0 | ||
| CRT05J7E5624 | Viking Technology | Resistor: thick film; 5.62MΩ; 0805; 125mW; ±5%; CRT; -55÷155°C; 2A |
| 0 | ||
| MBA0204VC5624FCT00 | Vishay Intertechnologies | Resistor: metal film; 5.62MΩ; THT; 400mW; ±1%; V; 200V; Ø0.5x29mm RoHS : Compliant |
| 0 | ||
| CRT12F7E5624 | Viking Technology | Resistor: thick film; 5.62MΩ; 2512; 1W; ±1%; CRT; -55÷155°C; 2A |
| 0 | ||
| 10056243 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 1; THT; 3A; 250V |
| 0 | ||
| 1825624 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 12A RoHS : Compliant |
| 0 | ||
| 256241 | IRIMO | Clamp; parallel; with thumbwheel; Grip capac: max.400mm; D: 150mm |
| 0 | ||
![]() Verical | 5624W | Molex | Cable Accessories Strain Relief Grip Nylon Gray MAX-LOC® RoHS : Compliant |
| 120 | |
| 5624 | Molex | Cable Accessories Strain Relief Grip Nylon Green MAX-LOC® RoHS : Compliant |
| 10 | ||
![]() Avnet Americas | 3403.0156.24 | Schurter Electronic Components | - Tape and Reel (Alt: 3403.0156.24) RoHS : Compliant |
| 2,000 | |
| CA32L15624INR | CTS Corporation | - Tape and Reel (Alt: CA32L15624INR) RoHS : Compliant | 0 | |||
| CA70C15624GMT | CTS Corporation | - Tape and Reel (Alt: CA70C15624GMT) RoHS : Compliant |
| 0 | ||
| CA70P15624ILT | CTS Corporation | - Tape and Reel (Alt: CA70P15624ILT) RoHS : Not Compliant | 0 | |||
| 225775-5624 | Molex | HFM RTK031 JCK TERMINAL TO PLG TERMINAL - Bulk (Alt: 2257755624) RoHS : Compliant |
| 0 | ||
| EQDP-056-24.00-TBR-TTR-8 | Samtec Inc | - Bulk (Alt: EQDP-056-24.00-TBR-TTR-8) RoHS : Compliant |
| 0 | ||
| 656C15624I3T | CTS Corporation | - Tape and Reel (Alt: 656C15624I3T) RoHS : Compliant | 0 | |||
| 626L15624I3T | CTS Corporation | - Tape and Reel (Alt: 626L15624I3T) RoHS : Compliant |
| 0 | ||
| DBAS 78G 61-948 PW 090 E5624 SCC | TE Connectivity | - Bag (Alt: ZPF000000000200769) RoHS : Compliant |
| 0 | ||
| CA25L15624GNR | CTS Corporation | - Tape and Reel (Alt: CA25L15624GNR) RoHS : Compliant | 0 | |||
| CA25P15624ILR | CTS Corporation | - Tape and Reel (Alt: CA25P15624ILR) RoHS : Compliant | 0 | |||
| 654P15624C2T | CTS Corporation | - Tape and Reel (Alt: 654P15624C2T) RoHS : Compliant | 0 | |||
| 656V15624C2T | CTS Corporation | - Tape and Reel (Alt: 656V15624C2T) RoHS : Compliant | 0 | |||
| CA32C15624ILT | CTS Corporation | - Tape and Reel (Alt: CA32C15624ILT) RoHS : Compliant | 0 | |||
| CA50C15624INT | CTS Corporation | - Tape and Reel (Alt: CA50C15624INT) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | 411019-01 | Qualtek Electronics Corporation | AC Power Cords North American Power Cord, NEMA 5-15P to ROJ 2, Strip 5/8, 14AWG / 3C, SJT, 105C, 120 inches, NA Color Code, Black Color RoHS : Compliant |
| 475 | |
| 24QS5.50SBM | Calex Mfg Co Inc | DC/DC Converters - Through Hole 50W, 9-36V-in to 5V a. 10A out DC-DC Converter RoHS : Compliant |
| 47 | ||
| 5624HQ/PFC0382BX-1Q48U-SLP | SUNON USA | DC Fans DC Axial Fan, 120x120x38mm, 24VDC, 233.7CFM, 1.16"H2O, 4x Wire, Tach/PWM, IP52 RoHS : Compliant |
| 30 | ||
| 24S12.30MTW ROHS | Calex Mfg Co Inc | DC/DC Converters - Through Hole 360W, 9-36V-in to 12V a. 30A out DC-DC Converter RoHS : Compliant |
| 20 | ||
| 24S12.41MXW-N ROHS | Calex Mfg Co Inc | DC/DC Converters - Through Hole 500W, 9-36V-in to 12V a. 41A out DC-DC Converter, Neg ON/OFF Logic RoHS : Compliant |
| 20 | ||
| 24S24.15TCM ROHS | Calex Mfg Co Inc | DC/DC Converters - Chassis Mount 360W, 9-36V-in to 24V a. 15A out DC-DC Converter, Chassis Mount RoHS : Compliant |
| 19 | ||
| 24S24.6HEW ROHS | Calex Mfg Co Inc | DC/DC Converters - Through Hole 150W, 9-36V-in to 24V a. 6.26A out DC-DC Converter RoHS : Compliant |
| 18 | ||
| 24S28.13MTW ROHS | Calex Mfg Co Inc | DC/DC Converters - Through Hole 360W, 9-36V-in to 28V a. 13A out DC-DC Converter RoHS : Compliant |
| 16 | ||
| 24S12.12HEW ROHS | Calex Mfg Co Inc | DC/DC Converters - Through Hole 150W, 9-36V-in to 12V a. 12.5A out DC-DC Converter RoHS : Compliant |
| 14 | ||
| 24S28.36FXP ROHS | Calex Mfg Co Inc | DC/DC Converters - Through Hole 1000W, 9-36V to 28V a. 36A out DC-DC Converter, Parallel RoHS : Compliant |
| 13 | ||
| 24S24.42FXP ROHS | Calex Mfg Co Inc | DC/DC Converters - Through Hole 1000W, 9-36V to 24V a. 42A out DC-DC Converter, Parallel RoHS : Compliant |
| 12 | ||
| 24S24.42FXW ROHS | Calex Mfg Co Inc | DC/DC Converters - Through Hole 1000W, 9-36V to 24V a. 42A out DC-DC Converter RoHS : Compliant |
| 10 | ||
| 24S53.19FXW ROHS | Calex Mfg Co Inc | DC/DC Converters - Through Hole 1000W, 9-36V to 53V a. 19A out DC-DC Converter RoHS : Compliant |
| 9 | ||
| 24S12.84FXW ROHS | Calex Mfg Co Inc | DC/DC Converters - Through Hole 1000W, 9-36V to 12V a. 84A out DC-DC Converter RoHS : Compliant |
| 6 | ||
| SEAC-040-04-09.4-TU-TU | Samtec Inc | Board to Board & Mezzanine Connectors .050" SEARAY(trademark) High-Speed High-Density Array Cable Assembly |
| 0 | ||
![]() Newark | 1N5624-TR. | Vishay Intertechnologies | Rectifier, Standard, 3A, 200V, Sod-64; |Vishay 1N5624-TR. RoHS : Compliant |
| 10,068 | |
| 1N5624-TR. | Vishay Intertechnologies | Rectifier, Standard, 3A, 200V, Sod-64; |Vishay 1N5624-TR. RoHS : Compliant |
| 10,068 | ||
| ERJ-PM8F5624V | Panasonic Electronic Components | Chip Res Smd, 5M62, ±1%, 660Mw; Available Until Stocks Are Exhausted Alternative Available |Panasonic ERJ-PM8F5624V RoHS : Not Compliant |
| 5,000 | ||
| 0034.5624.11 | Schurter Electronic Components | Fuse, 5A, 250Vac, Smt; |Schurter 0034.5624.11 RoHS : Not Compliant |
| 900 | ||
| 3-1473562-4 | TE Connectivity | Idc Conn, Plug, 412Mm; |Te Connectivity 3-1473562-4 RoHS : Compliant |
| 847 | ||
| 3-156-244 | Schurter Electronic Components | Alo13 3734 Bolt-On A 250Vdc 400A; |Schurter 3-156-244 RoHS : Compliant |
| 48 | ||
| MP015624 | SPC Multicomp | Cable Marker, Carrier, Black/Yellow, One; |Multicomp Pro MP015624 RoHS : Compliant |
| 14 | ||
| FMC00656-24 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMC00656-24 RoHS : Not Compliant |
| 14 | ||
| 256/240 | Peltec Timers & Controls | Volt & Ph Monitor Relay, Spdt, 8A, 250V; Product Range:200 Series; Contact Configuration:Spdt; Contact Current:8A; Relay Mounting:Din Rail; Relay Terminals:Screw; Switching Voltage Max:250Vac; Supply Voltage Max:240V |Peltec 256/240 RoHS : Not Compliant |
| 8 | ||
| 10225-624 | nVent Schroff | Case, 19", Desk Top, Steel, 4U; |Nvent Schroff 10225-624 RoHS : Compliant |
| 4 | ||
| FMCA2756-24 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 24", 610Mm, Rg223; |Fairview Microwave FMCA2756-24 RoHS : Not Compliant |
| 4 | ||
| 6356-24 | Pomona Electronics | Test Lead Set, 609.6Mm, 70V, 5A; |Pomona 6356-24 RoHS : Compliant |
| 1 | ||
| FMCA2562-48 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2562-48 RoHS : Not Compliant |
| 1 | ||
| 5624 | Apex Tool Group LLC | Sckt 1/2" Sq Dr 3/4" Sq 1-1/2" Oal; |Apex 5624 (Alternate Part Number: 6346542287412 RoHS : Not Compliant |
| 0 | ||
| 5624 | Molex | Max-Loc F3 3/4 (.375-.437); |Molex 5624 (Alternate Part Number: 6346542287412 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | AD5624RBCPZ-5R2![]() | Analog Devices Inc | Quad 5V 12bit SPI DAC with ref RoHS : Compliant |
| 896 | |
AD5624RBCPZ-5REEL7![]() | Analog Devices Inc | Quad 5V 12bit SPI DAC with ref RoHS : Compliant |
| 702 | ||
AD5624RBCPZ-3REEL7![]() | Analog Devices Inc | Quad 3V 12bit SPI DAC with ref RoHS : Compliant |
| 387 | ||
AD5624RBRMZ-5REEL7![]() | Analog Devices Inc | Quad 5V 12bit SPI DAC with ref RoHS : Compliant |
| 365 | ||
AD5624BRMZ-REEL7![]() | Analog Devices Inc | Quad 2.5-5.5V 12bit SPI DAC RoHS : Compliant |
| 349 | ||
AD5624RBRMZ-5![]() | Analog Devices Inc | Quad 5V 12bit SPI DAC with ref RoHS : Compliant |
| 115 | ||
AD5624BRMZ![]() | Analog Devices Inc | Quad 2.5-5.5V 12bit SPI DAC RoHS : Compliant |
| 89 | ||
AD5624BCPZ-R2![]() | Analog Devices Inc | Quad 2.5-5.5V 12bit SPI DAC RoHS : Compliant |
| 50 | ||
AD5624RBCPZ-3R2![]() | Analog Devices Inc | Quad 3V 12bit SPI DAC with ref RoHS : Compliant |
| 50 | ||
AD5624RBRMZ-3![]() | Analog Devices Inc | Quad 3V 12bit SPI DAC with ref RoHS : Compliant |
| 4 | ||
AD5624BCPZ-REEL7![]() | Analog Devices Inc | Quad 2.5-5.5V 12bit SPI DAC RoHS : Compliant |
| 0 | ||
AD5624RBRMZ-3REEL7![]() | Analog Devices Inc | Quad 3V 12bit SPI DAC with ref RoHS : Compliant |
| 0 | ||
![]() RS | 3403.0156.24 | Schurter Electronic Components | FUSE BRD MNT 100MA 250VAC 125VDC RoHS : Compliant |
| 1,554 | |
| 3-1473562-4 | TE Connectivity | MICRO CONNECTOR, MALE PIN, 4-POSITION, CRIMP, TP, 27-20AWG, ORANGE, RITS SERIES RoHS : Compliant |
| 367 | ||
| BSF-4856-24 (BSF485624) | Isostatic Industries Inc | FLANGE BEARING, 1.504 X 1.755 X 1-1/2 X 2 X 3/16IN, POWDERED METAL BRONZE |
| 10 | ||
| VS1AP5CV20Q5 (62436) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, CONVERGENT, 20MM, 10-30VDC, PNP, QD, VS1 SERIES |
| 5 | ||
| 556247 | RS Pro | CAT5E CABLE YELLOW F/UTP SHIELD PVC MALE RJ45 MALE RJ45 3.3 FT (1M) |
| 4 | ||
| 5624F504 | Metal Work Pneumatic USA Inc | FILTER, SYNTESI, SY2, 20 MIC, AUTODRAIN, 1/2BSP |
| 2 | ||
| 5624D104 | Metal Work Pneumatic USA Inc | COALESCENCE FILTER/DEPURATOR, SYNTESI, SY2,MAN DRAIN,1/2"BSP |
| 2 | ||
| 5624V104 | Metal Work Pneumatic USA Inc | SY2 SHUT-OFF VALVE, MANUAL, 1/2B SP, SYNTESI SERIES |
| 2 | ||
| EKI-5624P-AE | Advantech Co Ltd | 4-PORT 10/100MBPS WITH POE+ AND 2GE INDUSTRY ETHERNET PROVIEW POE SWITCH,12VDC |
| 2 | ||
| 6356-24 (1903211) | Pomona Electronics | ALLIG CLIP PATCH CORD KIT |
| 2 | ||
| BI15-Q20-RDZ32X2 (4256249) | TURCK Inc | NC BLOCKINDUCTIVE PROX SENSOR 15MM DETECTION RANGE 10 TO 300VDC 20 TO 250VAC |
| 2 | ||
| 7056246 | RS Pro | HEAVY DUTY WATER FED TELESCOPIC BRUSH |
| 1 | ||
| 86562452 | Murrplastik Systemtechnik GmbH | ESL 35X17R LABEL |
| 1 | ||
| 86562454 | Murrplastik Systemtechnik GmbH | ESL 56X21R LABEL |
| 1 | ||
| 5624R144 | Metal Work Pneumatic USA Inc | REGULATOR, SYNTESI, SY2, 0-8 BAR, 1/2BSP |
| 1 | ||
![]() Microchip Technology Inc | 2N5624 | Microchip Technology Inc | Power BJT _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | |
| HV5624K7-G | Microchip Technology Inc | 32-CHANNEL, SERIAL TO PARALLEL CONVERTER w/OPEN DRAIN OUTPUTS, WQFN, Projected EOL: 2051-11-15 RoHS : Compliant |
| 0 | ||
| HV5624K7-G-M933 | Microchip Technology Inc | 32-CHANNEL, SERIAL TO PARALLEL CONVERTER w/OPEN DRAIN OUTPUTS, WQFN, Projected EOL: 2050-12-05 RoHS : Compliant |
| 0 | ||
| DSC1124CI5-156.2422 | Microchip Technology Inc | MEMS OSC, HCSL, 156.2422MHz, 10PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2051-04-12 RoHS : Compliant |
| 0 | ||
DSC1124CI5-156.2422T![]() | Microchip Technology Inc | MEMS OSC, HCSL, 156.2422MHz, 10PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2041-07-19 RoHS : Compliant |
| 0 | ||
![]() Onlinecomponents.com | 45-5624 | GC Electronics | Connector Accessories Telephone/Telecom Rubber Boot Red RoHS : Compliant |
| 101 | |
| 5624 | Woodhead Molex | Flexible Cord Connector 3/4 in Nonmetallic 0.38 in - 0.44 in RoHS : Compliant |
| 10 | ||
| 73403-5624 | Molex | Molex 73403-5624 MOLEX RoHS : Compliant |
| 0 | ||
| 155000-5624 | ITT Interconnect Solutions | Connector Circular Housing PIN 7 Position 6 Shell Size Electroless Nickel Plated Aluminum RoHS : Compliant |
| 0 | ||
| 5624-OO | Brady Worldwide Inc | B689 5624-OO BLK/YEL ACID RoHS : Compliant |
| 0 | ||
| 225775-5624 | Molex | RoHS : Compliant |
| 0 | ||
| 5624-2T | Leviton Manufacturing Co | Decora Plus Rocker Switch RoHS : Compliant |
| 0 | ||
| 5624-O | Brady Worldwide Inc | ULTRA-MARK SIZE 8SM, BLK/Y |
| 0 | ||
| 39530-5624 | Molex | 5.08MM EURO PLUG RA GRN 10A AU 24CKT RoHS : Compliant |
| 0 | ||
| 5624-2 | Leviton Manufacturing Co | 20 Amp, 120/277 Volt, Decora Plus Rocker 4-Way AC Quiet Switch, Commercial Spec Grade, Self Grounding, Back & Side Wired, - Brown RoHS : Compliant |
| 0 | ||
| 151117-5624 | Molex | RoHS : Compliant |
| 0 | ||
| 5624-2I | Leviton Manufacturing Co | 20 Amp, 120/277 Volt, Decora Plus Rocker 4-Way AC Quiet Switch, Commercial Spec Grade, Self Grounding, Back & Side Wired, - Ivory RoHS : Compliant |
| 0 | ||
| 5624-2R | Leviton Manufacturing Co | Decora Plus Rocker Switch RoHS : Compliant |
| 0 | ||
| 71308-5624 | Molex | CGrid SMT Bkwy Hdr Tin 24Ckt Tubew/VC RoHS : Compliant |
| 0 | ||
| 155850-5624 | ITT Interconnect Solutions | Connector Miniature Circular Socket 4 Position Solder Cup Straight Flange Mount 4 Terminal 1 Port RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | AFT18H356-24SR6 | NXP Semiconductors | RF MOSFET LDMOS 65V 1.88GHz 1.1A 6L-FLG T/R RoHS : Compliant |
| 25,798 | |
AD5624RBRMZ-5![]() | Analog Devices Inc | IC DAC 4 CONV 12Bits String DAC 3-Wire Serial, DSP, MICROWIRE, QSPI, SPI 10-SOP Tube RoHS : Compliant |
| 1 | ||
AD5624RBCPZ-3R2![]() | Analog Devices Inc | IC DAC 1 CONV 12Bits String DAC 2-Wire Serial, I²C SOT-363 T/R RoHS : Compliant |
| 1 | ||
TLV5624IDGKG4![]() | Texas Instruments | IC DAC 1 CONV 8Bits String DAC 4-Wire Serial, DSP, MICROWIRE, QSPI, SPI 8-SOP Tube RoHS : Compliant |
| 30 | ||
TLV5624CDGKR![]() | Texas Instruments | IC DAC 1 CONV 8Bits String DAC 4-Wire Serial, DSP, MICROWIRE, QSPI, SPI 8-SOP T/R RoHS : Compliant |
| 11,716 | ||
TLV5624ID![]() | Texas Instruments | IC DAC 1 CONV 8Bits String DAC 4-Wire Serial, DSP, MICROWIRE, QSPI, SPI 8-SOIC Tube RoHS : Compliant |
| 822 | ||
TLV5624IDGK![]() | Texas Instruments | IC DAC 1 CONV 8Bits String DAC 4-Wire Serial, DSP, MICROWIRE, QSPI, SPI 8-SOP Tube RoHS : Compliant |
| 94 | ||
TLV5624CD![]() | Texas Instruments | IC DAC 1 CONV 8Bits String DAC 4-Wire Serial, DSP, MICROWIRE, QSPI, SPI 8-SOIC Tube RoHS : Compliant |
| 1,061 | ||
TLV5624CDGK![]() | Texas Instruments | IC DAC 1 CONV 8Bits String DAC 4-Wire Serial, DSP, MICROWIRE, QSPI, SPI 8-SOP Tube RoHS : Compliant |
| 3,883 | ||
| CG5624ATT | Cypress Semiconductor | 32 K x 9 Static RAM) RoHS : Not Compliant |
| 1,108 | ||
FAN5624UMPX![]() | Fairchild Semiconductor Corporation | LED Driver ICs Linear 30mA 10-QFN T/R RoHS : Compliant |
| 16 | ||
| 1N5624 | Harris Semiconductor | Rectifier Single Standard 200V 3A Axial RoHS : Compliant |
| 14,213 | ||
| 2SC5624VH-TL-E | Renesas Electronics Corporation | RF BJT Single 3.5V 35mA SOT-343 RoHS : Compliant |
| 99,000 | ||
![]() Sager | 7705624063 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | ||
| 7705624144 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 1562464 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding DieCut,EcE089 | 0 | |||
| 215624-3 | TE Connectivity | Terminals SNAP-IN CLUSTER REC | 0 | |||
| EQDP-056-24.00-TBR-TTR-8 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant |
| 0 | ||
| 56-2400 | EAO AG | EAO | 0 | |||
| TH562411 | Saia-Burgess | Pushbutton Switches | 0 | |||
| YAFD56-24-19SNC013 | TE Connectivity | TE Connectivity NOT A VALID PART NUMBER | 0 | |||
| YAFD56-24-38PX-1A0 | TE Connectivity | Circular MIL Spec Connector AFD56-24-38PX-1A | 0 | |||
| YAFD56-24-38PY6116 | TE Connectivity | Circular MIL Spec Connector AFD56-24-38PY-6116 | 0 | |||
| YAFD56-24-98PX6117 | TE Connectivity | Circular MIL Spec Connector AFD56-24-98PX-6117 RoHS : Not Compliant | 0 | |||
| 7705624058 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| CJ1-B0-22-635-624-D | Carling Technologies | Circuit Breakers CJ1B022635624D RoHS : Compliant | 0 | |||
| AFD5624108PN6094 | TE Connectivity | Circular MIL Spec Connector PLUG ASSY | 0 | |||
| F25624-000 | TE Connectivity | Circular MIL Spec Backshells TXR32AB00-2010AI2J RoHS : Not Compliant |
| 0 | ||
![]() Ameya Holding Limited | AD5624BCPZ-REEL7![]() | Analog Devices Inc | IC DAC NANO 12BIT QUAD 10-LFCSP RoHS : Compliant | 517 | ||
AD5624BRMZ-REEL7![]() | Analog Devices Inc | IC DAC 12BIT QUAD 10MSOP RoHS : Compliant | 137 | |||
![]() ComSIT USA | 1N5624GPE354 | Vishay Intertechnologies | GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 3A, 200V V(RRM), Silicon, DO-201AD RoHS : Compliant | 30,800 | ||
| 1N5624TR | Vishay Intertechnologies | STANDARD AVALANCHE SINTERGLASS DIODE Rectifier Diode, Avalanche, 1 Phase, 1 Element, 3A, 200V V(RRM), Silicon RoHS : Compliant | 10,000 | |||
| 1N5624GPHE354 | Vishay Intertechnologies | GLASS PASSIVATED JUNCTION RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 3A, 200V V(RRM), Silicon, DO-201AD RoHS : Compliant | 1,400 | |||
| 1N5624 | GS Battery | GLASS PASSIVATED JUNCTION RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 3A, 200V V(RRM), Silicon RoHS : Not Compliant | 500 | |||
| AD5624BRMZREEL7 | Analog Devices Inc | Digital-to-analog converter (DAC), 12-bit, Analog Devices, MSOP package RoHS : Compliant | 63 | |||
| DBAS78G610SNC5624 | TE Connectivity | PLUG WITH HEAVY DUTY LANYARD AND BACKSHELL 61 Contact(s), Aluminium Alloy, Female, Plug RoHS : Not Compliant | 1 | |||
![]() Interstate Connecting Components | 155624-3151 | ITT Interconnect Solutions | MKJ1C2T13-37DF | 0 | ||
| 3-2176562-4 | TE Connectivity | 3430 H2 1% 22R 100PPM 1K RL RoHS : Unknown | 0 | |||
| FDBA 56-24-61 PW-K-A24 | TE Connectivity | FDBA 56-24-61 PW-K-A246 | 0 | |||
| FDBA 56-24-61 SN-K-A24 | TE Connectivity | FDBA 56-24-61 SN-K-A246 | 0 | |||
| FDBA 56-24-61 SX-K | TE Connectivity | FDBA 56-24-61 SX-K | 0 | |||
| ASK25624 | Amphenol Positronic | D-SUB STANDARD CONNECTOR | 0 | |||
| F25624-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCTXR32AB00-2010AI2J RoHS : Not Compliant | 0 | |||
| FDBA 56-24-31 SN-K-A49 | TE Connectivity | FDBA 56-24-31 SN-K-A499 | 0 | |||
| 155624-1141 | ITT Interconnect Solutions | MKJ1C2W13-37DE | 0 | |||
| 155624-3130 | ITT Interconnect Solutions | MKJ1C2T13-37BD | 0 | |||
| 026-8556-240 | ITT Interconnect Solutions | 026-8556-240 | 0 | |||
| 562486-000 | TE Connectivity | EHVM-SEMICON-TAPE-38-9M | 0 | |||
| D-500-L456-2-4Y3-240-E | TE Connectivity | D-500-L456-2-4Y3-240-E | 0 | |||
| FDBA 56-24-61 SZ-K 090 | TE Connectivity | FDBA 56-24-61 SZ-K 090 | 0 | |||
| FDBA 56-24-61 SW-K 090 | TE Connectivity | FDBA 56-24-61 SW-K 090 A231 | 0 | |||
![]() PEI Genesis | M10-330956-243 | Amphenol Corporation |
| 43 | ||
| C10-330956-24FL | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 55PC2156-24-CML5-9CS2502 | TE Connectivity | Connectors |
| 746 | |
| 1564562-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 575 | ||
| 1956240-2 | TE Connectivity | TE COMPONENT (REF 1956240-2) RoHS : Compliant |
| 541 | ||
| 1956240-3 | TE Connectivity | Relays RoHS : Compliant |
| 175 | ||
| 7-1437562-4 | TE Connectivity | Switches RoHS : Compliant |
| 148 | ||
| AFD56-24-61SW-6094 | TE Connectivity | AFD PLUG SZ24-61 SKT CAD |
| 66 | ||
| F25624-000 | TE Connectivity | connector accessories RoHS : Not Compliant |
| 33 | ||
| M10-330956-243 | Amphenol Corporation | MIL 24 PTSE 24 E/B E (LRGBIN) |
| 28 | ||
| 10-562403-51S | Amphenol Corporation | CONNECTOR |
| 16 | ||
| AFD56-24-38SN-6094 | TE Connectivity | AFD PLUG SZ24-38 SKT NI |
| 15 | ||
| REFK1905624BK1 | Hammond Manufacturing | K.D. ECONOMY RACK 19X56X24.5 RoHS : Compliant |
| 8 | ||
| DBAC56-24 | TE Connectivity | DBAC-HERM TYPE56 |
| 3 | ||
| 1473562-4 | TE Connectivity | Unspecified Connectors RoHS : Compliant |
| 2 | ||
| 88-565624-35S | Amphenol Corporation | RECEPT |
| 2 | ||
| 88-565624-35R | Amphenol Corporation | RECEPT |
| 2 | ||
![]() PUI | 12.85624 | 20 | ||||
![]() Chip 1 Exchange | 82356240030 | Wurth Elektronik | INSTOCK RoHS : Compliant | 65,146 | ||
| 1473562-4 | TE Connectivity | INSTOCK RoHS : Compliant | 1,690 | |||
| UC5624-11 -EWRS | INSTOCK | 550 | ||||
| WCT056247600R | INSTOCK | 100 | ||||
| 74456247 | INSTOCK | 78 | ||||
TLV5624ID![]() | Texas Instruments | INSTOCK RoHS : Compliant | 74 | |||
| 236-003/K015-6243/000-500 | WAGO Innovative Connections | INSTOCK | 53 | |||
| SV90-35624-R2A | INSTOCK | 47 | ||||
| 236-003/K015-6243/000-100 | WAGO Innovative Connections | INSTOCK | 30 | |||
| 236-003/K015-6243/000-200 | WAGO Innovative Connections | INSTOCK | 20 | |||
| 12.85624 | Geyer Electronic E K | INSTOCK | 20 | |||
| 236-003/K015-6243/000-400 | WAGO Innovative Connections | INSTOCK | 3 | |||
![]() Avnet Abacus | 3403.0156.24 | Schurter Electronic Components | (Alt: 3403.0156.24) RoHS : Compliant | 4,000 | ||
| 24562457 | nVent Schroff | (Alt: 24562457) RoHS : Compliant | 8 | |||
| 24562463 | nVent Schroff | Combined Mounting Kit 6319 HP Width Pitch (Alt: 24562463) RoHS : Compliant | 0 | |||
| 24562484 | nVent Schroff | (Alt: 24562484) RoHS : Compliant | 0 | |||
| 24562458 | nVent Schroff | Telescopic Slide with Adaptor Rail for 19 Inch Subracks And Chassis Aluminum (Alt: 24562458) RoHS : Compliant | 0 | |||
| 459856241 | Molex | (Alt: 459856241) RoHS : Compliant | 0 | |||
| 562425-000 | TE Connectivity | (Alt: 562425-000) RoHS : Compliant | 0 | |||
| 626L15624I3T | CTS Corporation | - Tape and Reel (Alt: 626L15624I3T) RoHS : Compliant | 0 | |||
| 02562415-000 | TE Connectivity | (Alt: 02562415-000) RoHS : Compliant | 0 | |||
| 626P15624C3T | CTS Corporation | - Tape and Reel (Alt: 626P15624C3T) RoHS : Compliant | 0 | |||
| 02562418-000 | TE Connectivity | (Alt: 02562418-000) RoHS : Compliant | 0 | |||
| CA70C15624GMT | CTS Corporation | - Tape and Reel (Alt: CA70C15624GMT) RoHS : Compliant | 0 | |||
| CA50C15624INT | CTS Corporation | - Tape and Reel (Alt: CA50C15624INT) RoHS : Compliant | 0 | |||
| PTF5624R900BYEB | Vishay Intertechnologies | Through Hole Resistor 249 ohm PTF Series 125 mW 01 Axial Leaded 300 V Metal Film - Tape and Reel (Alt: PTF5624R900BYEB) RoHS : Compliant | 0 | |||
| MRS25000C5624FCT00 | Vishay Intertechnologies | - Tape and Reel (Alt: MRS25000C5624FCT00) RoHS : Compliant | 0 | |||
![]() Avnet Asia | S1D56240D0A0000 | Epson Electronics America Inc | (Alt: S1D56240D0A0000) RoHS : Compliant | 0 | ||
| XCAU25P-1SFVB784I5624 | AMD | (Alt: XCAU25P-1SFVB784I5624) RoHS : Compliant | 0 | |||
![]() Avnet Silica | FAN5624UMPX | onsemi | Linear LED Driver 4channel with Singlewire Digital Interface (Alt: FAN5624UMPX) RoHS : Compliant | 0 | ||
| B39202B5624U410 | Qualcomm RFFE Filter Products | BASETATION SAW FILTERB1 TX 33MM (Alt: B39202B5624U410) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 2322-156-24323 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 4,000 | |
| 2322-156-24701 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 3,816 | ||
| 2322-724-65624 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 3,600 | ||
| 87256-2411 | Molex | IN STOCK SHIP TODAY RoHS : Not Compliant | 2,320 | |||
| 2306-187-15624 | Phoenix Contact | IN STOCK SHIP TODAY |
| 2,300 | ||
| PTF-56-249R-1%-T-13BF | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 1,900 | ||
| PTF56249R00FT13BF | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 1,900 | ||
| 1N5624 | GS Battery | IN STOCK SHIP TODAY |
| 475 | ||
| 2306 241 65624 | Vishay Intertechnologies | IN STOCK SHIP TODAY | 390 | |||
TLV5624IDGK![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 53 | ||
| 175-6-240P | Wakefield-Vette | IN STOCK SHIP TODAY |
| 40 | ||
| 65624-472 | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Not Compliant | 25 | |||
| 1N5624 | Harris Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 7 | ||
| MLSS156-24-C | ITW Switches | IN STOCK SHIP TODAY |
| 2 | ||
| 5945-856-2404 | Allied Controls Incorporated | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | SSS-156-24ZI | PennEngineering (PEM) | PEM SNAP-TOP� Standoffs (Types SSA SSS SSC) are designed for permanent installation into metal panels or PC boards.These all-metal standoffs use a spring action to hold PC boards and subassemblies securely while allowing for quick removal. Screws and o |
| 10,557 | |
| 5624-TE-136-033-115 | RAF Electronic Hardware | 0 | ||||
| 82-56-245-50 | Southco | The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin | 0 | |||
| SSA-156-24 | PennEngineering (PEM) | PEM SNAP-TOP� Standoffs (Types SSA SSS SSC) are designed for permanent installation into metal panels or PC boards.These all-metal standoffs use a spring action to hold PC boards and subassemblies securely while allowing for quick removal. Screws and o | 0 | |||
| 4562-440-A | RAF Electronic Hardware | 0 | ||||
| 82-56-242-60 | Southco | The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin | 0 | |||
| 82-56-242-20 | Southco | 0 | ||||
| 8562-4 | HeliCoil | 0 | ||||
| 30562-4-CP | RAF Electronic Hardware | 0 | ||||
| 17W05624B | Essentra Components | FLAT WASHER, .320 ID, .562 OD, | 0 | |||
| STKB-256-24 | Standard Insert | 16-STANDARD INSERT | 0 | |||
| 4562-440-SS-20 | RAF Electronic Hardware | STANDARD STAINLESS STEEL MALE-FEMALE STANDOFF | 0 | |||
| 5624-N-165-080-106 | RAF Electronic Hardware | 0 | ||||
| 82-56-245-60 | Southco | The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin | 0 | |||
| M0562-4-AL | RAF Electronic Hardware | METRIC ROUND SPACERS 6mm Rd X 33mm X 4.3mm ID | 0 | |||
![]() EBV Elektronik | 1N5624-TR | Vishay Intertechnologies | AVALANCHE DIODE SOD64 STD (Alt: 1N5624-TR) RoHS : Compliant | 10,000 | ||
| 1N5624-TAP | Vishay Intertechnologies | AVALANCHE DIODE SOD64 STD (Alt: 1N5624-TAP) RoHS : Compliant | 10,000 | |||
| FAN5624UMPX | onsemi | Linear LED Driver 4channel with Singlewire Digital Interface (Alt: FAN5624UMPX) RoHS : Compliant | 0 | |||
| AS22-M562-4G12 | Broadcom Limited | (Alt: AS22-M562-4G12) RoHS : Compliant | 0 | |||
![]() Flip Electronics | BCM56242XB0IFSBLG | Broadcom Limited | Stock, Ship Today |
| 41 | |
![]() Master Electronics | 25.624.3653.0 | Wieland Electric GmbH | Conn Rising Cage Terminal Block F 6 POS 3.81mm Screw ST Cable Mount 8A Carton RoHS : Compliant |
| 50 | |
| 5624 | Woodhead Molex | Flexible Cord Connector 3/4 in Nonmetallic 0.38 in - 0.44 in RoHS : Compliant |
| 0 | ||
| 155624-1405 | ITT Interconnect Solutions | Connector Miniature Circular Socket 20 Position Solder Straight Flange Mount 20 Terminal 1 Port RoHS : Not Compliant |
| 0 | ||
| 155624-3151 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| 215624-3 | TE Connectivity | SNAP-IN CLUSTER REC MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3-2176562-4 | TE Connectivity | 3430 H2 1% 22R 100ppm 1k RL RoHS : Compliant |
| 0 | ||
| EQDP-056-24.00-TBR-TTR-8 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 701562410 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| 701562447 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| 701562492 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-156-243 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CJ1-B0-22-635-624-D | Carling Technologies | CJ1B022635624D RoHS : Compliant |
| 0 | ||
| DBAS-78G-61-0-PN-090-L5624 | TE Connectivity | DBAS 78G 61-0 PN 090 L5624 RoHS : Compliant |
| 0 | ||
| DBAS78G301PN090L5624SCC | TE Connectivity | DBAS 78G 3-01 PN 090 L5624 SCC RoHS : Compliant |
| 0 | ||
| DBAS78GR370PN090Q5624 | TE Connectivity | DBAS 78GR 37-0 PN 090 Q5624 RoHS : Compliant |
| 0 | ||
![]() Neutron USA | DELL-CC5624S | Dell Computer | DELL ECOLOOP PRO SLIM BRIEFCASE 15 |
| 112 | |
| 14A-56-24 | Signal Transformer Inc | Laminated Core 56VA Power Transformer 115V, 230V Primary Parallel 12V, Series 24V Secondary Parallel 4.66A, Series 2.33A Through Hole |
| 50 | ||
| 1825624 | Phoenix Contact | Pluggable Terminal Blocks 14 Pos 5.08mm Invert Plug 24-12AWG Screw RoHS : Compliant |
| 50 | ||
| 0034.5624.11 | Schurter Electronic Components | Surface Mount Fuses SMD-FST 5X20 5A T RoHS : Compliant |
| 50 | ||
| 2-1473562-4 | TE Connectivity | Straight Cable Mount 2mm Pitch E-Con Sensor Connector 4 Way RoHS : Compliant |
| 50 | ||
| 97000005624 | HARTING Technology Group | Heavy Duty Power Connectors Han S 450 Plus crimp contact housing, 120 mm conductor, coding C1, red RoHS : Compliant |
| 50 | ||
| 7760056249 | Weidmüller Interface GmbH & Co. KG | Relay Sockets & Hardware TEST LEVER BLOCK DRH/DRW RoHS : Compliant |
| 20 | ||
| 9075624 | RS Pro | USB Connector Female 3.0 Type B-Type A Metal Contact Nickel Plated Panel Mount |
| 3 | ||
| 18656-2-4039 | ebm-papst | Fan Accessories GRD GRILL |
| 0 | ||
| PS-DC-DUAL-5624T | Transition Networks Inc | HARDENED 345 W ISOLATED PWR SUPPLY W/ 56 |
| 0 | ||
| 1656246 | Phoenix Contact | D-Sub Cables VS-09-DSUB-20-LI-2.0 RoHS : Compliant |
| 0 | ||
| 1-1473562-4 | TE Connectivity | Rectangular Connector RITS CONN.PLUG ASSY 4P RED RoHS : Compliant |
| 0 | ||
| 1795624 | Phoenix Contact | Pluggable Terminal Blocks 9 Pos 5.08mm pitch Plug 24-12 AWG Screw RoHS : Compliant |
| 0 | ||
| 1605624 | Phoenix Contact | Heavy Duty Power Connectors Male B10 10P IDC RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W14562-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male Right Angle to BNC Male Right Angle Low Loss Cable 48 Inch Length Using LMR-100A-UF Coax., Radio frequency assembly BNC male right angle to BNC male right angle low loss cable 48 inch length using LMR-100A-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male right angle to BNC male right angle low loss cable 48 inch length using LMR-100A-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle BNC cable connection on one end and a right angle BNC cable connection on the other. Our low loss right angle BNC to right angle BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14562-48 can also be known as a low loss right angle BNC plug to right angle BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14562-48 RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle BNC male to right angle BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3W14562-48 is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC right angle plug to BNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 356 | |
| PE3056-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to SMA Female Cable 24 Inch Length Using RG178 Coax., Radio frequency assembly SMA male to SMA female cable 24 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 24 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3056-24, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3056-24 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3056-24 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 24 inch length using RG178 coax. |
| 81 | ||
| PE3C10456-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Female Bulkhead to 2.92mm Female Bulkhead Cable 24 Inch Length Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 2.92mm female bulkhead cable 24 inch length using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 2.92mm female bulkhead cable 24 inch length using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a 2.92mm bulkhead cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a female gender on end 1 and a female on end 2. PE3C10456-24 can also be known as a 2.92mm jack to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our bulkhead 2.92mm female to bulkhead 2.92mm female cable has a maximum VSWR of 1.4:1. 2.92mm jack to 2.92mm jack cable assembly PE3C10456-24 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. 2.92mm jack bulkhead to 2.92mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10756-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 1.85mm Male to SMA Male Cable 24 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10756-24 1.85mm male to SMA male RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and an SMA cable connection on the other. Our 1.85mm to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10756-24 can also be known as a 1.85mm plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10756-24 1.85mm plug to SMA plug cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10756-24 can also be used in the other direction and will be an SMA male to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to SMA cable assembly for quick shipment worldwide. Variations of 1.85mm and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to SMA RF cable assembly as per your requirements. |
| 2 | ||
| PE3M0256-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348A, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 D38999 Contact Pin to SMA Male Cable 24 Inch Length Using PE-P086 Coax with HeatShrink, LF Solder. The PE3M0256-24 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA pin contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0256-24 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMA pin to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0256-24 between-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMA pin to SMA male cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0256-24 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMA to SMA RF cable are available on our downloadable PDF datasheet. BMA pin to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA RF cable assembly as per your requirements. |
| 1 | ||
| PE3W15624 | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SHV Plug to MHV Male Cable Using LMR-100 Coax. PE3W15624 is a SHV plug to MHV male cable using LMR-100A coax. This Pasternack SHV plug to MHV male cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm MHV for connector 2. Our plug SHV to male MHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15624 SHV plug to MHV male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W25624 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. SMA Male to QMA Female Bulkhead Cable Using RG188-DS Coax. PE3W25624 is a SMA male to QMA female bulkhead cable using RG188-DS coax. This Pasternack SMA male to QMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm QMA for connector 2. Our male SMA to female QMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25624 SMA male to QMA female bulkhead cable assembly is constructed with RG188-DS coax. | 0 | |||
| PE3W14156-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female to SMA Male Low PIM Cable Using 1/4 inch Superflexible Coax in 24 Inch., Radio frequency assembly N female to SMA male low PIM cable using 1/4 inch superflexible coax in 24 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female to SMA male low PIM cable using 1/4 inch superflexible coax in 24 inch, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM N type to SMA cable assemblies have a female gender on end 1 and male on end 2. This type N to SMA cable is a female to male coax assembly, PE3W14156-24, can also be known as a low PIM N type jack to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N jack to SMA plug cable assembly PE3W14156-24 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM type N female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W14156-24 can also be used in the other direction and will be SMA male to N type female cable assembly if the opposite connectivity is required. Low PIM type N jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to SMA male low PIM cable using 1/4 inch superflexible coax in 24 inch. |
| 0 | ||
| PE3C10356-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated 7/16 DIN Male to 7/16 DIN Male Low PIM Cable 24 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 7/16 DIN male to 7/16 DIN male low PIM cable 24 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 7/16 DIN male to 7/16 DIN male low PIM cable 24 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 7/16 DIN to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10356-24 can also be known as a low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10356-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C10356-24 is built with TCOM-400-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3M0356-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. MIL Size 8 D38999 Contact Socket to SMA Female Cable 24 Inch Length Using PE-P086 Coax with HeatShrink, LF Solder. The PE3M0356-24 from Pasternack is a D38999 contact cable assembly that is built with a size 8 M39029 socket contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. The PE3M0356-24 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 socket to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0356-24 in-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. M39029 socket to SMA female cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0356-24 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to SMA RF cable are available on our downloadable PDF datasheet. M39029 socket to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W05624 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. N Male to TNC Male Cable Using RG402 Coax. PE3W05624 is a N male to TNC male cable using RG402 coax. This Pasternack N male to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to male TNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W05624 N male to TNC male cable assembly is constructed with RG402 coax. | 0 | |||
| PE3C10856-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Non-Magnetic Cable 24 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10856-24 non-magnetic SMA male to SMA male RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10856-24 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10856-24 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10856-24 SMA plug to SMA plug cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3C5624 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. N Female to N Female 4 Hole Flange Cable Using RG393 Coax., Radio frequency assembly N female to N female 4 hole flange cable using RG393 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female to N female 4 hole flange cable using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N 4 hole flange cable connection on the other. Our type N to N type cable assemblies have a female gender on end 1 and female on end 2. This N type to type N cable is a female to female coax assembly, PE3C5624, can also be known as a type N jack to type N jack cable assembly and will be shipped same-day as it is purchased. N type jack to type N jack cable assembly PE3C5624 is built with RG393 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 10 GHz maximum frequency type N female to N type female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5624 can also be used in the other direction and will be type N female 4 hole flange to type N female cable assembly if the opposite connectivity is required. Type N jack to N type jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to N female 4 hole flange cable using RG393 coax. | 0 | |||
| PE3W15624LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SHV Plug to MHV Male Cable Using LMR-100 Coax, LF Solder. PE3W15624LF is a SHV plug to MHV male cable using LMR-100A coax. This Pasternack SHV plug to MHV male cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm MHV for connector 2. Our plug SHV to male MHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15624LF SHV plug to MHV male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C8056-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 24 inches. |
| 0 | ||
![]() Venkel Ltd. | CR1206-8W-5624FT | VENKEL LTD | Chip Resistor;1206;1/8W;5.62M;�1% RoHS : Compliant | 10,000 | ||
| CR1206-8W-5624DT | VENKEL LTD | Chip Resistor;1206;1/8W;5.62M;�0.5% RoHS : Compliant | 0 | |||
| AGCR1206-TL-5624FT | VENKEL LTD | Auto Grade Resistor;1206;1/4W;�200PPM;5.62M;�1% RoHS : Compliant | 0 | |||
| PWCR1206-UK-5624DT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;5.62M;�0.5% RoHS : Compliant | 0 | |||
| AGCR0402-PL-5624FT | VENKEL LTD | Auto Grade Resistor;0402;1/16W;�200PPM;5.62M;�1% RoHS : Compliant | 0 | |||
| PWCR1210-VK-5624FT | VENKEL LTD | Pulse Withstanding CR;1210;1/2W;�100PPM;5.62M;�1% RoHS : Compliant | 0 | |||
| HVCR0402-16W-5624FT | VENKEL LTD | High Voltage CR;0402;1/16W;5.62M;�1% RoHS : Compliant | 0 | |||
| MELFC0207-XK-5624FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�100PPM;5.62M;�1% RoHS : Compliant | 0 | |||
| CR0805-8W-5624DT | VENKEL LTD | Chip Resistor;0805;1/8W;5.62M;�0.5% RoHS : Compliant | 0 | |||
| CR0805-8W-5624FT | VENKEL LTD | Chip Resistor;0805;1/8W;5.62M;�1% RoHS : Compliant | 0 | |||
| MELFC0207-VK-5624FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�100PPM;5.62M;�1% RoHS : Compliant | 0 | |||
| AGCR2512-XL-5624FT | VENKEL LTD | Auto Grade Resistor;2512;1W;�200PPM;5.62M;�1% RoHS : Compliant | 0 | |||
| PWCR2010-WK-5624FT | VENKEL LTD | Pulse Withstanding CR;2010;3/4W;�100PPM;5.62M;�1% RoHS : Compliant | 0 | |||
| MELFC0207-VC-5624FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�50PPM;5.62M;�1% RoHS : Compliant | 0 | |||
| HVCR2010-2W-5624FT | VENKEL LTD | High Voltage CR;2010;1/2W;5.62M;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | TAS5624ADDV![]() | Texas Instruments | Audio Amplifier, 150W, 2 Channel(s), 1 Func, PDSO44 RoHS : Compliant | 9,618 | ||
TLV5624CDGKRG4![]() | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 3.5us Settling Time, PDSO8 RoHS : Compliant | 9,276 | |||
TLV5624IDGKG4![]() | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 3.5us Settling Time, PDSO8 RoHS : Compliant | 9,262 | |||
| TAS5624DDV | Texas Instruments | 8,916 | ||||
TLV5624CDGKG4![]() | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 3.5us Settling Time, PDSO8 RoHS : Compliant | 7,225 | |||
TLV5624CDGKR![]() | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 1us Settling Time, PDSO8 RoHS : Compliant | 6,606 | |||
TLV5624IDG4![]() | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 3.5us Settling Time, PDSO8 RoHS : Compliant | 6,509 | |||
TLV5624IDGK![]() | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 1us Settling Time, PDSO8 RoHS : Compliant | 6,153 | |||
TAS5624ADDVR![]() | Texas Instruments | Audio Amplifier, 150W, 2 Channel(s), 1 Func, PDSO44 RoHS : Compliant | 4,787 | |||
| TAS5624ADDVEVM | Texas Instruments | 4,782 | ||||
TLV5624CDR![]() | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 3.5us Settling Time, PDSO8 RoHS : Compliant | 3,859 | |||
TLV5624CDG4![]() | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 1us Settling Time, PDSO8 RoHS : Compliant | 3,769 | |||
TLV5624ID![]() | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 1us Settling Time, PDSO8 RoHS : Compliant | 3,699 | |||
TLV5624CDRG4![]() | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 3.5us Settling Time, PDSO8 RoHS : Compliant | 3,582 | |||
TLV5624CD![]() | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 1us Settling Time, PDSO8 RoHS : Compliant | 3,552 | |||
![]() Win Source Electronics | AD5624BRMZ![]() | Analog Devices Inc | IC DAC NANO 12BIT QUAD 10-MSOP RoHS : Compliant |
| 20,000 | |
AD5624BCPZ-R2![]() | Analog Devices Inc | IC DAC 12BIT V-OUT 10LFCSP / 12 Bit Digital to Analog Converter 4 10-LFCSP-WD (3x3) RoHS : Compliant |
| 7,140 | ||
AD5624BCPZ-REEL7![]() | Analog Devices Inc | IC DAC NANO 12BIT QUAD 10-LFCSP RoHS : Compliant |
| 6,980 | ||
| AD5624BCP | Analog Devices Inc | 12-Bit nanoDAC 4-Channel Voltage Output DAC LFCSP-10 |
| 6,000 | ||
AD5624BRMZ-REEL7![]() | Analog Devices Inc | IC DAC 12BIT V-OUT 10MSOP RoHS : Compliant |
| 3,000 | ||
AD5624RBRMZ-3![]() | Analog Devices Inc | Quad, 12-/14-/16-Bit nanoDACs with 5 ppm/C On-Chip Reference | IC DAC 12BIT V-OUT 10MSOP RoHS : Compliant |
| 2,600 | ||
AD5624RBRMZ-3REEL7![]() | Analog Devices Inc | IC DAC 12BIT V-OUT 10MSOP RoHS : Compliant |
| 2,600 | ||
| AD5624BRM | Analog Devices Inc | 12-Bit nanoDAC 4-Channel Voltage Output DAC MSOP-10 |
| 2,062 | ||
| AD5624RBCP | Analog Devices Inc | 12-Bit nanoDAC 4-Channel Voltage Output DAC with Internal Reference LFCSP-10 |
| 1,500 | ||
AD5624RBCPZ-5REEL7![]() | Analog Devices Inc | IC DAC NANO 12BIT QUAD 10-LFCSP RoHS : Compliant |
| 1,350 | ||
AD5624RBCPZ-3REEL7![]() | Analog Devices Inc | IC DAC NANO 12BIT 1.25V 10-LFCSP RoHS : Compliant |
| 1,306 | ||
TAS5624ADDV![]() | Texas Instruments | IC AMP D MONO/STER 400W 44HTSSOP RoHS : Compliant |
| 1,304 | ||
AD5624RBRMZ-5REEL7![]() | Analog Devices Inc | IC DAC 12BIT 2.5V REF 10-MSOP RoHS : Compliant |
| 1,000 | ||
AD5624RBCPZ-5R2![]() | Analog Devices Inc | IC DAC NANO 12BIT QUAD 10LFCSP RoHS : Compliant |
| 459 | ||
AD5624RBCPZ-3R2![]() | Analog Devices Inc | IC DAC NANO 12BIT 1.25V 10-LFCSP RoHS : Compliant |
| 90 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |