50480800BCNRNNFZCWC Price, Distributor, Stock

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length: 48 inches. BNC Male to BNC Female Bulkhead Cable 48 Inch Length Using RG213 Coax., Radio frequency assembly BNC male to BNC female bulkhead cable 48 inch length using RG213 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC female bulkhead cable 48 inch length using RG213 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE3450-48, can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE3450-48 is built with RG213 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3450-48 can also be used in the other direction and will be BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC female bulkhead cable 48 inch length using RG213 coax.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

PE3C6504-12

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-375, RF Cable Type: SPO-375, RF Cable Impedance: 50 Ohm, Length: 12 inches. Outdoor Rated 7/16 DIN Female to 7/16 DIN Female Low PIM Cable 12 Inch Length Using SPO-375 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN female to 7/16 DIN female low PIM cable 12 inch length using SPO-375 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN female to 7/16 DIN female low PIM cable 12 inch length using SPO-375 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP375-716F-LP 7/16 DIN cable connection on one end and TC-SPP375-716F-LP 7/16 DIN cable connection on the other. Our low PIM TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable assemblies have a female gender on end 1 and female on end 2. This TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable is a female to female coax assembly, PE3C6504-12, can also be known as a low PIM TC-SPP375-716F-LP 7/16 DIN jack to TC-SPP375-716F-LP 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. TC-SPP375-716F-LP 7/16 DIN jack to TC-SPP375-716F-LP 7/16 DIN jack cable assembly PE3C6504-12 is built with SPO-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP375-716F-LP 7/16 DIN cable assembly is manufactured with TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM TC-SPP375-716F-LP 7/16 DIN female to TC-SPP375-716F-LP 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP375-716F-LP 7/16 DIN jack to TC-SPP375-716F-LP 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP375-716F-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN female to 7/16 DIN female low PIM cable 12 inch length using SPO-375 coax using Times Microwave parts.

1 : $107.99
25 : $102.59
50 : $97.19
100 : $92.87

PE45046

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: 7/16 DIN, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Interface Type 1: LMR-195, Interface Type 2: LMR-195-FR, Interface Type 3: PE-C195, Interface Type 4: PE-P195. 7/16 DIN Male Right Angle Connector Crimp/Solder Attachment for LMR-195, LMR-195-FR, PE-C195, PE-P195. PE45046 7/16 DIN male right angle coaxial connector has an interface type of LMR-195, LMR-195-FR, PE-C195, PE-P195 and a 50 Ohm impedance. Pasternack 7/16 DIN male connector uses shield/contact crimp/solder as an attachment method. Our male 7/16 DIN right angle coaxial connector provides a minimum frequency of DC and a maximum frequency of 3 GHz. The Pasternack right angle 7/16 DIN male coaxial connector has a PTFE dielectric type and a VSWR of 1.2. The Pasternack 7/16 DIN coaxial connector has a brass body with tri-metal plating. Our PE45046 7/16 DINright angle connector uses brass contact. This 7/16 DIN male right angle coaxial RF connector is RoHS and REACH compliant. This Pasternack right angle male 7/16 DIN connector will ship the same day as purchased. Our 7/16 DIN right angle male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 7/16 DIN connector cable assemblies that will ship the same day as well, *LMR™ is a Trademark of Times Microwave.

1 : $65.99
25 : $62.69
50 : $59.39
100 : $56.75

PE15A5048

Pasternack Enterprises

Key Specifications, Frequency, Min: 6 GHz, Frequency, Max: 18 GHz, Gain, Min: 35 dB, 1dB Compression Point, Min: 33 dBm, 3rd Intercept Point, Typ: 40 dB, Voltage, DC Typ: 12 Volts. 2 Watt P1dB, 6 GHz to 18 GHz, Medium Power Amplifier, SMA, 35 dB Gain, 40 dBm IP3. RF solid state power amplifier (SSPA) PE15A5048 from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a medium power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 2 Watts. Pasternack solid state power amplifier part number PE15A5048 SMA medium power amp has a 35 dB minimum gain. The medium power medium gain amp is rated with a P1dB of 33 dBm. Our radio frequency medium power solid state amplifier is constructed for minimum frequency of 6 GHz and a maximum frequency of 18 GHz. Additional radio frequency specs on this high frequency medium gain medium power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our medium power medium gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This medium power 2 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs.

1 : $14,775.0
5 : $14,184.0
10 : $13,593.0

PE35350-48

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG6A/U, RF Cable Type: RG6, RF Cable Impedance: 75 Ohm, Length: 48 inches. 75 Ohm TNC Male to 75 Ohm BNC Male Cable 48 Inch Length Using 75 Ohm RG6 Coax., Radio frequency assembly 75 Ohm TNC male to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG6 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm TNC male to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG6 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and BNC cable connection on the other. Our TNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to BNC cable is a male to male coax assembly, PE35350-48, can also be known as a TNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to BNC plug cable assembly PE35350-48 is built with RG6 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to BNC cable connectors, has a 75 Ohm impedance and is double shielded. RF specs on this TNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35350-48 can also be used in the other direction and will be BNC male to TNC male cable assembly if the opposite connectivity is required. TNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm TNC male to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG6 coax.

1 : $65.99
25 : $62.69
50 : $59.39
100 : $56.75

PE3W05046/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: 10KV, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. 10KV Female Bulkhead to MCX Plug Right Angle Cable Using LMR-195-FR Coax with HeatShrink., Pasternack’s PE3W05046/BK/HS 10KV female bulkhead to right angle MCX plug RF cable assembly using LMR-195-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 10KV female to MCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 10KV to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 10KV bulkhead cable connection on one end and a right angle MCX cable connection on the other. Our 10KV to MCX cable assembly has a female gender on end 1 and a plug on end 2. PE3W05046/BK/HS can also be known as a 10KV jack to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05046/BK/HS RF cable has an frpe jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. This PE3W05046/BK/HS 10KV jack to MCX male cable assembly is built with LMR-195-FR, which is a flexible coax type. The Pasternack flexible 10KV cable assembly is manufactured with 10KV to right angle MCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05046/BK/HS can also be used in the other direction and will be a right angle MCX plug to 10KV female bulkhead cable assembly if the opposite connectivity is required. This 10KV jack bulkhead to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 10KV to MCX cable assembly for quick shipment worldwide. Variations of 10KV and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 10KV to MCX RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

PE3W12504

Pasternack Enterprises

PE3W25047LF

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. Mini SMP Female to SMP Female Right Angle Cable Using PE-P086HF Coax, LF Solder. PE3W25047LF is a Mini SMP female to SMP female right angle cable using PE-P086HF coax. This Pasternack Mini SMP female to SMP female right angle cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMP for connector 2. Mini SMP to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25047LF Mini SMP female to SMP female right angle cable assembly is constructed with PE-P086HF coax.

PE34504/HS

Pasternack Enterprises

PE35048LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMA Female Bulkhead Cable Using RG142 Coax with HeatShrink, LF Solder. PE35048LF/HS is a SMA female bulkhead to SMA female bulkhead cable using RG142 coax. This Pasternack SMA female bulkhead to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA bulkhead to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE35048LF/HS SMA female bulkhead to SMA female bulkhead cable assembly is constructed with RG142 coax.

PE3C5048

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Male to SMP Female Right Angle Cable Using PE-SR405FLJ Coax., Radio frequency assembly SMA male to SMP female right angle cable using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMP female right angle cable using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMP cable connection on the other. Our SMA to right angle SMP cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMP cable is a male to female coax assembly, PE3C5048, can also be known as a SMA plug to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMP jack cable assembly PE3C5048 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5048 can also be used in the other direction and will be right angle SMP female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMP female right angle cable using PE-SR405FLJ coax.

PE3C5504-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Smooth Bore SMP Male Bulkhead to Trimmed Lead Cable 24 Inch Length Using Tinned RG405 Coax., Radio frequency assembly smooth bore SMP male bulkhead to trimmed lead cable 24 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Smooth bore SMP male bulkhead to trimmed lead cable 24 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to trimmed lead cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and trimmed lead cable connection on the other. Our SMP to trimmed lead cable assembly has male gender on end 1 and sexless on end 2. PE3C5504-24 can also be known as a SMP plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMP plug to trimmed lead sexless cable assembly PE3C5504-24 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has crimp/solder attachment method and body with plating.Additional dimensions, specifications and CAD drawings for this PE3C5504-24 RF cable are available on our downloadable PDF datasheet.PE3C5504-24 can also be used in the other direction and will be trimmed lead sexless to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to trimmed lead cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP RF cable assembly as per your requirements.

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

PE3W02504

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG303/U, RF Cable Type: RG303, RF Cable Impedance: 50 Ohm. N Male to C Male Cable Using RG303 Coax. PE3W02504 is a N male to C male cable using RG303 coax. This Pasternack N male to C male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm C for connector 2. Our male N to male C cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02504 N male to C male cable assembly is constructed with RG303 coax.

PE3W15040LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to 7/16 DIN Male Right Angle Cable Using LMR-600-UF Coax with HeatShrink, LF Solder. PE3W15040LF/HS is a 7/16 DIN male right angle to 7/16 DIN male right angle cable using LMR-600-UF coax. This Pasternack 7/16 DIN male right angle to 7/16 DIN male right angle cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. 7/16 DIN right angle to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 7/16 DIN right angle to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15040LF/HS 7/16 DIN male right angle to 7/16 DIN male right angle cable assembly is constructed with LMR-600-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C4750-48

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male Right Angle to TNC Male Cable 48 Inch Length Using LMR-600-DB Coax., Radio frequency assembly N male right angle to TNC male cable 48 inch length using LMR-600-DB coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to TNC male cable 48 inch length using LMR-600-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and TNC cable connection on the other. Our right angle type N to TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to TNC cable is a male to male coax assembly, PE3C4750-48, can also be known as a right angle type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3C4750-48 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type right angle male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4750-48 can also be used in the other direction and will be TNC male to right angle type N male cable assembly if the opposite connectivity is required. Type N right angle plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to TNC male cable 48 inch length using LMR-600-DB coax.

1 : $161.99
25 : $153.89
50 : $145.79
100 : $139.31

TE Connectivity

5050462-2

TE Connectivity

SOCKET,MIN-SPR W/H SN-AU SER-2 Socket Length: 4.52 mm Socket Length: .178 in PCB Hole Diameter: .052 in PCB Hole Diameter: 1.32 mm Socket Sleeve Style: Open Bottom Pin Socket | 4.52 mm .178" .052" 1.32 mm | Part Number: 5050462-2 | Internal Number: 5050462-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.66
500 : $0.68
250 : $0.7
100 : $0.72
50 : $0.75
1 : $0.82

37,857

350436-2

TE Connectivity

RING TERMINAL 18-14 AWG TPST Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 18 – 14 AWG Wire Size: .8 – 2 mm² Wire Size: 1624 – 4106 CMA Stud Size: #10 Closed Ring Tongue Terminal 18 – 14 AWG .8 – 2 mm² 1624 – 4106 CMA | Ring Terminal | Part Number: 350436-2 | Internal Number: 350436-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.08
100 : $0.11
10 : $0.13
1 : $0.17

22,279

485043-2

TE Connectivity

SPLICE 4000-9000 .020 TPBR Splice Type: Thru Splice Pigtail Splice Wire Size: 4000 – 9000 CMA Insulation Option: Uninsulated Sealable: No Splice Features: Serrated Thru Splice 4000 – 9000 CMA Uninsulated | Electrical Wire Splice | Part Number: 485043-2 | Internal Number: 485043-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.11
100 : $0.15
10 : $0.18
1 : $0.24

8,014

3627575047C100K-1

TE Connectivity

3627C 575047 10UH 10% S1 Inductance: 10 µH Current Rating (Max): 2000 mA DC Resistance: .13 Ω Passive Component Tolerance: 10 % Shielded: No Power Inductor | 10 µH 2000 mA .13 Ω 10 % | Part Number: 3627575047C100K-1 | Internal Number: 1-2176641-1 | TE Connectivity
RoHS : Compliant

2,500 : $1.06
1,000 : $1.09
500 : $1.12
250 : $1.15
100 : $1.17
50 : $1.2
25 : $1.23
10 : $1.26
1 : $1.29

4,000

350416-5

TE Connectivity

.093 COMM P&S PIN AU/NI/BR Contact Mating Area Plating Material: Gold (Au) Contact Type: Pin Wire Contact Termination Area Plating Material: Gold Wire Size: 20 – 14 AWG Operating Voltage: 250 VAC 600 VAC Gold (Au) Pin 20 – 14 AWG | Connector Contact | Part Number: 350416-5 | Internal Number: 350416-5 | TE Connectivity
RoHS : Compliant

1,000 : $0.64
100 : $0.86
10 : $1.06
1 : $1.34

3,769

3550470RJT

TE Connectivity

3550 470R 5% Resistance Value: 470 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 5 W Surface Mount Resistor | 470 Ω Thick Metal Film Power Resistor 5 % | Part Number: 3550470RJT | Internal Number: 2176405-4 | TE Connectivity
RoHS : Compliant

1,000 : $1.5
500 : $1.55
250 : $1.59
100 : $1.64
50 : $1.69
25 : $1.73
10 : $1.78
1 : $1.82

3,019

35504K7JT

TE Connectivity

3550 4K7 5% Resistance Value: 4.7K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 5 W Surface Mount Resistor | 4.7K Ω Thick Metal Film Power Resistor 5 % | Part Number: 35504K7JT | Internal Number: 1-2176405-6 | TE Connectivity
RoHS : Compliant

1,000 : $1.48
500 : $1.53
250 : $1.57
100 : $1.62
50 : $1.66
25 : $1.71
10 : $1.75
1 : $1.8

1,637

355047KJT

TE Connectivity

3550 47K 5% Resistance Value: 47K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 5 W Surface Mount Resistor | 47K Ω Thick Metal Film Power Resistor 5 % | Part Number: 355047KJT | Internal Number: 2-2176405-8 | TE Connectivity
RoHS : Compliant

1,000 : $1.5
500 : $1.55
250 : $1.59
100 : $1.64
50 : $1.69
25 : $1.73
10 : $1.78
1 : $1.82

1,335

1116504-2

TE Connectivity

MJ,10MM,8P,NO SHIELD,SN TAILS Modular Jack & Plug Interface Type: RJ45 Port Configuration: Single Port Port Matrix Configuration: 1 x 1 Modular Jacks & Plugs Products: RJ Type Jacks & Plugs Modular Connector Style: Jack RJ45 Single Port 1 x 1 RJ Type Jacks & Plugs | Rj45 Connector | Part Number: 1116504-2 | Internal Number: 1116504-2 | TE Connectivity
RoHS : Compliant

1,000 : $4.98
500 : $5.13
250 : $5.28
100 : $5.46
50 : $5.62
1 : $6.17

928

650408-5

TE Connectivity

064 EURO TYPE C RECEPT ST ASSY Connector & Housing Type: Receptacle Connector System: Board-to-Board Termination Post & Tail Length: .18 in Termination Post & Tail Length: 4.57 mm Number of Positions: 64 Receptacle Board-to-Board .18" 4.57 mm | Eurocard Connector | Part Number: 650408-5 | Internal Number: 650408-5 | TE Connectivity
RoHS : Compliant

1,000 : $4.0
500 : $4.11
250 : $4.24
100 : $4.38
50 : $4.51
1 : $4.94

610

5650461-5

TE Connectivity

ASSY,RECEPTACLE,EUROCARD,TYPE Connector & Housing Type: Receptacle Connector System: Board-to-Board Termination Post & Tail Length: .11 in Termination Post & Tail Length: 2.79 mm Number of Positions: 96 Receptacle Board-to-Board .11" 2.79 mm | Eurocard Connector | Part Number: 5650461-5 | Internal Number: 5650461-5 | TE Connectivity
RoHS : Compliant

1,000 : $5.13
500 : $5.38
250 : $5.65
100 : $5.76
50 : $5.99
25 : $6.6
10 : $6.73
1 : $7.61

556

5650462-4

TE Connectivity

ASSY,RECEPTACLE,EUROCARD,TYPE Connector & Housing Type: Receptacle Connector System: Board-to-Board Termination Post & Tail Length: .167 in Termination Post & Tail Length: 4.24 mm Number of Positions: 96 Receptacle Board-to-Board .167" 4.24 mm | Eurocard Connector | Part Number: 5650462-4 | Internal Number: 5650462-4 | TE Connectivity
RoHS : Compliant

1,000 : $6.59
500 : $6.78
250 : $6.99
100 : $7.22
50 : $7.43
1 : $8.16

484

650408-4

TE Connectivity

064 EURO TYPE C RECEPT ST ASSY Eurocard Connector | Part Number: 650408-4 | Internal Number: 650408-4 | TE Connectivity
RoHS : Compliant

1,000 : $5.16
500 : $5.31
250 : $5.47
100 : $5.65
50 : $5.82
1 : $6.38

379

1-111504-8

TE Connectivity

024 UNIV I/O 30DP NO EARS LTCH Connector System: Wire-to-Wire Number of Positions: 24 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Wire 24 2.54 mm .1" | Ribbon Cable Connector | Part Number: 1-111504-8 | Internal Number: 1-111504-8 | TE Connectivity
RoHS : Compliant

1,000 : $16.2
500 : $16.66
250 : $17.18
100 : $17.76
50 : $18.27
1 : $20.05

246

HSA5047RJ

TE Connectivity

HSA50 47R 5% Resistance Value: 47 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminum Housed & Hsa | 47 Ω Wire Wound 5 % Power Resistor | Part Number: HSA5047RJ | Internal Number: 6-1625984-1 | TE Connectivity
RoHS : Compliant

100 : $7.99
50 : $8.37
25 : $8.75
10 : $9.13
1 : $9.51

217

Teledyne HiRel

5962-8680504QA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 16, 170 NS ACCESS TIME
RoHS : Not Compliant

5962-9158504MYA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 50 NS ACCESS TIME
RoHS : Not Compliant

5962-9158504MZA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 50 NS ACCESS TIME
RoHS : Not Compliant

5962-9154504MXA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR
RoHS : Not Compliant

5962-87515043A

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 90 NS ACCESS TIME
RoHS : Not Compliant

5962-87515043C

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 90 NS ACCESS TIME

5962-9071504MUA

Teledyne HiRel

FIFO MEMORY, 4K X 9, 50 NS ACCESS TIME
RoHS : Not Compliant

5962-8873504KA

Teledyne HiRel

PROM, ONE TIME, 2K X 8, REGISTERED, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-88735043A

Teledyne HiRel

PROM, ONE TIME, 2K X 8, REGISTERED, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-89755043A

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT AND-OR
RoHS : Not Compliant

5962-8873504LA

Teledyne HiRel

PROM, ONE TIME, 2K X 8, REGISTERED, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-88735043C

Teledyne HiRel

PROM OTP 2K X 8 REGISTERED 25 NS

5962-9071504MYA

Teledyne HiRel

FIFO MEMORY, 4K X 9, 50 NS ACCESS TIME
RoHS : Not Compliant

5962-8680504XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 16, 170 NS ACCESS TIME
RoHS : Not Compliant

M38510/31504BFA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS
RoHS : Not Compliant

Venkel Ltd.

SMPI505040-1R0NU

VENKEL LTD

Square Miniature Power Inductor;505040;1uH;�30%
RoHS : Compliant

C01005HQN250-4R7CNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;25V;4.7pF;�0.25pF
RoHS : Compliant

C0201HQN250-4R0CNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;25V;4pF;�0.25pF
RoHS : Compliant

C0201X5R250-473KNP

VENKEL LTD

Chip Capacitor;0201;X5R;25V;0.047uF;�10%
RoHS : Compliant

C0402C0G250-4R0CNP

VENKEL LTD

Chip Capacitor;0402;C0G;25V;4pF;�0.25pF
RoHS : Compliant

C0603HQN250-470JNP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;25V;47pF;�5%
RoHS : Compliant

C0603HQN250-4R2ANP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;25V;4.2pF;�0.05pF
RoHS : Compliant

C0603X7R250-473MNP

VENKEL LTD

Chip Capacitor;0603;X7R;25V;0.047uF;�20%
RoHS : Compliant

C1812X7R250-475MNE

VENKEL LTD

Chip Capacitor;1812;X7R;25V;4.7uF;�20%
RoHS : Compliant

MELFC0204-TE-1504DT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�25PPM;1.5M;�0.5%
RoHS : Compliant

MELFC0204-ZC-1504FT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;1.5M;�1%
RoHS : Compliant

MELFC0204-ZK-7504FT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�100PPM;7.5M;�1%
RoHS : Compliant

C0201HQN250-4R3ANP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;25V;4.3pF;�0.05pF
RoHS : Compliant

C0402HQN250-4R1BNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;25V;4.1pF;�0.1pF
RoHS : Compliant

C0603X7R250-473MPE

VENKEL LTD

Chip Capacitor;0603;X7R;25V;0.047uF;�20%;Pd
RoHS : Compliant

Win Source Electronics

CD4504BM

Texas Instruments

IC TRNSLTR UNIDIRECTIONAL 16SOIC / Voltage Level Translator Unidirectional 1 Circuit 6 Channel 16-SOIC
RoHS : Compliant

900 : $0.3336
725 : $0.3472
555 : $0.3608
390 : $0.3879
250 : $0.4014
120 : $0.4286

95,000

CD4504BPWRG4

Texas Instruments

CMOS Hex Voltage Level Shifter for TTL-to-CMOS or CMOS-to-CMOS Operation
RoHS : Compliant

1,910 : $0.1573
1,530 : $0.1637
1,180 : $0.17
825 : $0.1828
530 : $0.1892
250 : $0.202

87,080

0527450497

Molex

CONN TOP 4POS 0.5MM R/A
RoHS : Compliant

2,380 : $0.1413
1,780 : $0.1576
1,375 : $0.1631
1,000 : $0.1684
645 : $0.1739
265 : $0.2119

84,256

52745-0497

Molex

0.50mm (.020") Pitch FFC/FPC Connector, Right Angle, SMT, ZIF, Top Contact Style, 4 Circuits, Lead-free, Gold (Au) Contact Plating, High Barrier Packaging
RoHS : Compliant

2,560 : $0.1173
1,910 : $0.1309
1,480 : $0.1354
1,075 : $0.1399
695 : $0.1444
285 : $0.176

64,256

BTS5045-2EKA

Infineon Technologies AG

IC PWR SW HI-SIDE 2CH DSO14-40
RoHS : Compliant

154 : $1.9549
115 : $2.1805
89 : $2.2557
65 : $2.3309
42 : $2.4061
18 : $2.9324

50,000

0430250400

Molex

CONN RCPT HSG 4POS 3.00MM
RoHS : Compliant

5,390 : $0.0624
4,030 : $0.0696
3,115 : $0.072
2,260 : $0.0744
1,460 : $0.0768
600 : $0.0935

46,070