| Electronic Components Datasheet Search |
|
5029SLASH15C Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | 50-29-1900 | Molex | Terminal, Tin, 30 to 24 AWG, Brass, 7879 Series, KK High Pressure Crimp Terminal, Female, 30-24 AWG - Tape and Reel (Alt: 0050291900) RoHS : Compliant |
| 10,000 | |
| 485029-1 | TE Connectivity | Ring Tongue Terminal 14-18AWG 23.62mm 11.93mm Tin Strip - Tape and Reel (Alt: 485029-1) RoHS : Compliant |
| 9,000 | ||
MJE15029G![]() | onsemi | 8.0 A, 120 V PNP Bipolar Power Transistor. - Rail/Tube (Alt: MJE15029G) RoHS : Compliant |
| 1,500 | ||
| HLMP-5029 | Broadcom Limited | Right Angle Mount Housing for 5mm, T-1 3/4 LEDs - Bulk (Alt: HLMP-5029) RoHS : Compliant |
| 329 | ||
| ZW-08-12-G-S-450-290 | Samtec Inc | Board Stackers & Spacers, Pin Header, 11.43 mm, 8 Contacts, Solder, 1 Rows, 2.54 mm, ZW Series - Bulk (Alt: ZW-08-12-G-S-450-290) RoHS : Compliant |
| 91 | ||
DSC1001AI5-029.4912![]() | Microchip Technology Inc | - Rail/Tube (Alt: DSC1001AI5-029.4912) RoHS : Compliant |
| 50 | ||
| 8-2150294-6 | TE Connectivity | - Bulk (Alt: 8-2150294-6) RoHS : Not Compliant | 0 | |||
| 7-2150293-7 | TE Connectivity | - Bag (Alt: 7-2150293-7) RoHS : Not Compliant | 0 | |||
| 50-29-1559 | Molex | Connector Housing, Receptacle, 4 Contacts, 1 Row, 2.54 mm, 2695 Series, Nylon, KK 254, Black - Bag (Alt: 0050291559) RoHS : Compliant |
| 0 | ||
| ERC50294R00FEEK500 | Vishay Intertechnologies | Through Hole Resistor, 294 ohm, ERC Series, 100 mW, ? 1%, Axial Leaded, 200 V, Metal Film - Bulk (Alt: ERC50294R00FEEK500) RoHS : Compliant |
| 0 | ||
| RM222-050-291-0256 | Molex | - Bulk (Alt: RM222-050-291-0256) RoHS : Not Compliant |
| 0 | ||
| 1000B-5029F | iNRCORE LLC | 1000B-5029F - Rail/Tube (Alt: 1000B-5029F) RoHS : Not Compliant | 0 | |||
| 0318665029 | ITT Interconnect Solutions | - Bulk (Alt: 0318665029) RoHS : Not Compliant | 0 | |||
| 7010502972 | 3M Interconnect | CUSTOM CABLE ASSEMBLY 30006410 - Bulk (Alt: 7010502972) RoHS : Not Compliant |
| 0 | ||
| 43045-0291 | Molex | MICROFIT 3.0 VT TH HDR DR TIN 2CKT T&R - Tape and Reel (Alt: 0430450291) RoHS : Compliant |
| 0 | ||
![]() Newark | HB0502900090G | Amphenol Anytek | Terminal Block, Wtb, 5Pos, 24-18Awg, Th; Pitch Spacing:5Mm; No. Of Positions:5Positions; Wire Size Awg Min:24Awg; Wire Size Awg Max:18Awg; Conductor Area Csa:-; Wire Connection Method:Push In; Rated Current:10A; Rated Voltage:300V Rohs Compliant: Yes RoHS : Compliant |
| 3,000 | |
| 350291KFT | TE Connectivity | Chip Res Smd, 91K, ±1%, 2W; |Te Connectivity Cgs 350291KFT RoHS : Compliant |
| 1,660 | ||
| 350291KFT | TE Connectivity | Chip Res Smd, 91K, ±1%, 2W; |Te Connectivity Cgs 350291KFT RoHS : Compliant |
| 1,660 | ||
| AI-50290N | Mueller Electric Company | Crimp Terminal, Fork, #10, Yel, 10Awg; Product Range:-; Wire Size (Awg):12Awg To 10Awg; Conductor Area Csa:-; Stud Size - Metric:-; Stud Size - Imperial:#10; Insulator Material:Nylon (Polyamide); Insulator Colour:Yellow Rohs Compliant: Yes RoHS : Compliant |
| 750 | ||
| AI-50290N | Mueller Electric Company | Crimp Terminal, Fork, #10, Yel, 10Awg; |Mueller Electric AI-50290N RoHS : Compliant |
| 114 | ||
| 35029R1FT | TE Connectivity | Res, 9R1, 1%, 2W, 2010, Thick Film; |Te Connectivity Cgs 35029R1FT RoHS : Compliant |
| 105 | ||
| 1300250295 | Molex | Sensor Cord, 5P Plug-Rcpt, 5M; |Molex 1300250295 RoHS : Compliant |
| 24 | ||
| 66.2010-05029 | Stäubli Electrical Connectors | Stack 4Mm Banana Plug-Plug, Blue, 1M; |Staubli 66.2010-05029 RoHS : Compliant |
| 20 | ||
| 66.2014-05029 | Stäubli Electrical Connectors | Stack 4Mm Banana Plug-Plug, Violet, 2M; |Staubli 66.2014-05029 RoHS : Compliant |
| 10 | ||
| 66.2017-05029 | Stäubli Electrical Connectors | Stack 4Mm Banana Plug-Plug, Black, 2M; |Staubli 66.2017-05029 RoHS : Compliant |
| 7 | ||
| FMAM5029 | Fairview Microwave Inc | 44 Db Gain High Power Ldmos Amplifier At; |Fairview Microwave FMAM5029 RoHS : Compliant |
| 1 | ||
| 5029 | Keystone Electronics Corp | Test Point, Pcb, Compact, Smt; Product Range:-; Connector Colour:-; Connector Mounting:Surface Mount; Mounting Hole Dia:-; Contact Material:Phosphor Bronze; Contact Plating:Silver Plated Contacts Rohs Compliant: Yes |Keystone 5029 RoHS : Compliant |
| 0 | ||
| 5029 | George Risk Industries | Sw, S50Rs-18-B W/28 Ga 1061; |George Risk Industries 5029 RoHS : Not Compliant |
| 0 | ||
| 5029 | Keystone Electronics Corp | Sm Test Point - Compact |Keystone 5029 RoHS : Not Compliant |
| 0 | ||
| 5029 | Adafruit Industries | Tinys2 - Esp32-S2 Development Board |Adafruit 5029 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX15029ATB+T | Analog Devices Inc | 1.425V to 3.6V Input, 500mA Lo RoHS : Compliant |
| 70,199 | |
| MAX15029AGA/VY+T | Analog Devices Inc | High-Performance LDOs Deliver RoHS : Compliant | 13,600 | |||
| MAX15029ATB+ | Analog Devices Inc | 1.425V to 3.6V Input, 500mA Lo RoHS : Compliant | 8,441 | |||
| MAX15029AGA/VY+ | Analog Devices Inc | High-Performance LDOs Deliver RoHS : Compliant |
| 166 | ||
| MAX15029ATB/V+T | Analog Devices Inc | 1.425V to 3.6V Input, 500mA Lo RoHS : Compliant |
| 0 | ||
| MAX15029ATB/V+ | Analog Devices Inc | 1.425V to 3.6V Input, 500mA Lo RoHS : Compliant | 0 | |||
![]() RS | 8745029 | RS Pro | TERMINAL BLOCK PLUGGABLE 3 POSITION PLUG 28-14AWG SCREW GREEN 0.2IN (5.08MM) |
| 100 | |
| AI-50290N | Mueller Electric Company | INTERCONNECT TERMINAL, 12-10 NYLON INSULATED NUMB.10 SPADE |
| 89 | ||
| 5029-W | Leviton Manufacturing Co | WH REC SGL 2P-3W SPEC GR 15A-250V 6-15R |
| 78 | ||
| 5029 | Leviton Manufacturing Co | SINGLE RECEPTACLE OUTLET, 6-15R, 15A, 250V, BROWN |
| 32 | ||
| 1450290 | RS Pro | MILD STEEL HOSE CLAMP 12.0MM BAND WIDTH 16MM-22MM ID |
| 24 | ||
| 4435.0292 (TA35-CFTBFJ20C0-000) | Schurter Electronic Components | CBE TA35-CFTBFJ20C0 |
| 17 | ||
| 130025-0290 (DND11A-M020) | Woodhead Molex | MC 5P M/MFE 2M ST/ST DEVICENET |
| 13 | ||
| 1965029 | RS Pro | NITRILE RUBBER O-RING SEAL, 20MM BORE, 26MM OUTER DIAMETER |
| 5 | ||
| 650.2990.006 | Altech Corporation | INDUCTIVE SENSOR, KIN-E50PS/008-KLSM8 |
| 4 | ||
| 05029501001 (029501) | Wera Werk Hermann Werner GmbH & Co. KG | 395,KRAFTFORM PLUS,900 SERIES HOLO SW 3/16" X 90MM NUTSPINNER |
| 4 | ||
| 2685029 | RS Pro | HALOGEN FREE FLAME RETARDANT HEAT SHRINK TUBING 2:1 YELLOW/GREEN 0.5/0.25IN 4FT |
| 1 | ||
| T0053450299 | Apex Tool Group LLC | CARTRIDGE TIP HOLDER FOR UP TO RT TIPS |
| 1 | ||
| 650.2942.005 | Altech Corporation | INDUCTIVE SENSOR, KIB-M08PS/1.5-KLSM8 |
| 1 | ||
| 5029 | Adafruit Industries | TINYS2 - ESP32-S2 DEVELOPMENT BOARD |
| 0 | ||
| 5029 | Keystone Electronics Corp | CIRCUIT BOARD HARDWARE PCB SM TEST POINT COMPACT T/R RoHS : Compliant |
| 0 | ||
![]() Microchip Technology Inc | M83536/15-029L | Microchip Technology Inc | 4PDT 10 AMP RELAY QPL BR230-890B2-48V-029L, Projected EOL: 2051-08-17 - Contact for Pricing | 0 | ||
| M83536/15-029M | Microchip Technology Inc | 4PDT 10 AMP RELAY QPL BR230-890B2-48V-029M, Projected EOL: 2051-08-17 - Contact for Pricing | 0 | |||
| BR250-290C2-28V-015 | Microchip Technology Inc | SPDT 25 AMP RELAY QPL, Projected EOL: 2051-08-17 RoHS : Compliant |
| 0 | ||
| DSC1001DI5-029.4912 | Microchip Technology Inc | MEMS OSC, LVCMOS, 29.4912MHz, 10PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2051-04-17 RoHS : Compliant |
| 0 | ||
| DSC1001DL5-029.4912 | Microchip Technology Inc | MEMS OSC, LVCMOS, 29.4912MHz, 10PPM, 1.8-3.3V, -40 to 105C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-05-07 RoHS : Compliant |
| 0 | ||
| DSC1001AE5-029.1621 | Microchip Technology Inc | MEMS OSC, LVCMOS, 29.1621MHz, 10PPM, 1.8-3.3V, -20 to 70C, 7.0 x 5.0mm, VDFN, Projected EOL: 2045-11-21 RoHS : Compliant |
| 0 | ||
DSC1001AI5-029.4912![]() | Microchip Technology Inc | MEMS OSC, LVCMOS, 29.4912MHz, 10PPM, 1.8-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2046-03-30 RoHS : Compliant |
| 0 | ||
| DSC1001AL5-029.4912 | Microchip Technology Inc | MEMS OSC, LVCMOS, 29.4912MHz, 10PPM, 1.8-3.3V, -40 to 105C, 7.0 x 5.0mm, VDFN, Projected EOL: 2046-03-25 RoHS : Compliant |
| 0 | ||
| DSC1001CI5-029.4912 | Microchip Technology Inc | MEMS OSC, LVCMOS, 29.4912MHz, 10PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2045-12-27 RoHS : Compliant |
| 0 | ||
DSC1001DI5-029.4912T![]() | Microchip Technology Inc | MEMS OSC, LVCMOS, 29.4912MHz, 10PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2041-09-16 RoHS : Compliant |
| 0 | ||
| DSC1001DL5-029.4912T | Microchip Technology Inc | MEMS OSC, LVCMOS, 29.4912MHz, 10PPM, 1.8-3.3V, -40 to 105C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-05-07 RoHS : Compliant |
| 0 | ||
| DSC1001AE5-029.1621T | Microchip Technology Inc | MEMS OSC, LVCMOS, 29.1621MHz, 10PPM, 1.8-3.3V, -20 to 70C, 7.0 x 5.0mm, VDFN, Projected EOL: 2045-11-21 RoHS : Compliant |
| 0 | ||
DSC1001AI5-029.4912T![]() | Microchip Technology Inc | MEMS OSC, LVCMOS, 29.4912MHz, 10PPM, 1.8-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2041-02-02 RoHS : Compliant |
| 0 | ||
| DSC1001AL5-029.4912T | Microchip Technology Inc | MEMS OSC, LVCMOS, 29.4912MHz, 10PPM, 1.8-3.3V, -40 to 105C, 7.0 x 5.0mm, VDFN, Projected EOL: 2046-03-25 RoHS : Compliant |
| 0 | ||
DSC1001CI5-029.4912T![]() | Microchip Technology Inc | MEMS OSC, LVCMOS, 29.4912MHz, 10PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2045-12-27 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | LV5029MD-BH | onsemi | Display Driver, BICMOS, PDSO10 RoHS : Compliant |
| 72,350 | |
| S99-50299 | Infineon Technologies AG | Semiconductor RoHS : Compliant | 39,828 | |||
| MAX15029ATB+T | Analog Devices Inc | IC VOLT REG Adjustable 1 REG 500mV 500mA 10-SON T/R RoHS : Compliant |
| 132,500 | ||
| MAX15029ATB+ | Analog Devices Inc | IC VOLT REG Adjustable 1 REG 500mV 500mA 10-SON T/R RoHS : Compliant |
| 1,162 | ||
| PT5029M | Texas Instruments | Switching Regulator, Voltage-mode, 1A, 1200kHz Switching Freq-Max, Hybrid RoHS : Compliant |
| 13 | ||
MAX15029ATB+T![]() | Maxim Integrated Products | IC VOLT REG Adjustable 1 REG 500mV 500mA 10-SON T/R RoHS : Compliant |
| 94,840 | ||
![]() Sager | 5029 | Keystone Electronics Corp | Test Plugs & Test Jacks SM TEST POINT COMPACT T/R RoHS : Compliant |
| 10,000 | |
| 9713805029 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9763415029 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9821005029 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9861405029 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7707115029 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding NOSG,STR,ZnC,PSA,CTL | 0 | |||
| 8-2150294-6 | TE Connectivity | Bench Top Tools OC-PMC-AT-E-N-S | 0 | |||
| 7707215029 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7-2150293-7 | TE Connectivity | Bench Top Tools OC-100F155F-CRIMP TOOLING KIT | 0 | |||
| 7-2150298-2 | TE Connectivity | TE Connectivity OCEAN_2.0_Applicator-E-120F155FA | 0 | |||
| 5029028 | Phoenix Contact | Terminal Block Tools & Accessories LB SCREWS WITH BLUE INSULATOR RoHS : Compliant |
| 0 | ||
| 1200650295 | Molex | Sensor Cables / Actuator Cables MICRO-CHANGE M12 SNGLEND CRDST RoHS : Compliant |
| 0 | ||
| 0429705029 | Molex | Molex | 0 | |||
| 0050291559 | Molex | Headers & Wire Housings 100 KK Hsg W/LRamp W/PoR 4Ckt 2695 BK RoHS : Compliant |
| 0 | ||
| 04-0975-0296 | TE Connectivity | PT9150-0100-121-4140 RoHS : Not Compliant |
| 0 | ||
![]() TME | 50-29-1900 | Molex | Connector: wire-board; socket; female; data; 4A; 250V; tinned; 10mΩ RoHS : Compliant |
| 87,600 | |
| 50291 | Goobay | Adapter; USB 2.0; USB A socket,USB B plug |
| 68 | ||
| 2210502939 | Molex | Connector: valve connector; male; PIN: 2; IP67 RoHS : Compliant |
| 8 | ||
| 01050290 | GSR | Tap: metric; M20; right hand thread; 2.5; L: 140mm; 12mm |
| 0 | ||
| 095-850-292-036 | Amphenol RF | Cable; 0.914m; BNC male,both sides; straight; 50Ω |
| 0 | ||
| 095-850-294-048 | Amphenol RF | Cable; 1.219m; TNC male,both sides; straight; 50Ω |
| 0 | ||
| 105029 | Brymen Technology Corporation | Probe: K-type temperature; -20÷250°C |
| 0 | ||
| 1300250294 | Molex | Cable: for sensors; PIN: 5; 7/8" male,7/8" female; unshielded; 4m RoHS : Compliant |
| 0 | ||
| 131J35029X | Amphenol CONEC | Contact; male; copper alloy; gold-plated; THT; on PCBs; angled; 75Ω |
| 0 | ||
| 132A35029X | Amphenol CONEC | Contact; female; copper alloy; gold-plated; THT; on PCBs; angled |
| 0 | ||
| 30.075.029 | Iskra MIS | Relay: installation; bistable,impulse; NC + NO x3; Ucoil: 24VAC |
| 0 | ||
| 66.2015-15029 | Stäubli Electrical Connectors | Test lead: single; 32A; banana plug 4mm,both sides; Len: 1.5m |
| 0 | ||
| 165X15029X | Amphenol CONEC | Enclosure for connectors: D-Sub; D-Sub 15pin,D-Sub HD 26pin |
| 0 | ||
| 23.3050-29 | Stäubli Electrical Connectors | Laboratory connector: 4mm banana; socket; 1kV; 32A; white; brass RoHS : Compliant |
| 0 | ||
| 2502910000 | Weidmüller Interface GmbH & Co. KG | Splice terminal: rail; W; 520A; 1kV; screw-in; wemid; L: 83.5mm; TS35 RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | MJE15029G![]() | onsemi | Complementary Silicon Plastic Power Transistors RoHS : Compliant | 262 | ||
![]() ComSIT USA | MFSM250299 | Bourns Inc | PTC RESETTABLE FUSE PTC Resettable Fuse, Surface Mount RoHS : Compliant | 1,415 | ||
| 814150291 | TE Connectivity | Power/Signal Relay, 1 Form C, SPDT, Momentary, 0.03A (Coil), 12VDC (Coil), 360mW (Coil), 10A (Contact), DC Input, AC Output, Panel Mount RoHS : Not Compliant | 679 | |||
MJE15029G![]() | onsemi | PNP SILICON PLASTIC POWER TRANSISTOR Power Bipolar Transistor, 8A I(C), 120V V(BR)CEO, 1-Element, PNP, Silicon, TO-220AB, Plastic/Epoxy, 3 Pin RoHS : Compliant | 550 | |||
| BV03950290L | era | Electronic Component RoHS : Compliant | 10 | |||
![]() Interstate Connecting Components | 851-01A123S5029 | SOURIAU-SUNBANK | 0 | |||
| 85106EC106S5029 | SOURIAU-SUNBANK | J3800 RoHS : Not Compliant | 0 | |||
| 095-850-292-072 | Amphenol RF | BNC STRAIGHT PLUG IP67 TO BNC | 0 | |||
| 5-1879502-9 | TE Connectivity | CRGH2512 5% 3M6 2W RoHS : Compliant |
| 0 | ||
| 04-0975-0296 | TE Connectivity | PT9150-0100-121-4140 RoHS : Not Compliant | 0 | |||
| 04-0979-5029 | TE Connectivity | PT9510-0300-121-1130 RoHS : Not Compliant | 0 | |||
| 85106A106S5029 | SOURIAU-SUNBANK | J3800 RoHS : Not Compliant | 0 | |||
| 250292-000 | TE Connectivity | SMOE-81512-CEE05(S10) | 0 | |||
| 065029-0006 MS | ITT Interconnect Solutions | MS3126E12-10S | 0 | |||
| 065029-0006MS | ITT Interconnect Solutions | MS3126E12-10S | 0 | |||
| 7-2150299-7 | TE Connectivity | OCEAN_2.0_SPARE_PART_KIT-104F1 |
| 0 | ||
| C93-735029-08S | Amphenol Industrial Operations | Plug | 0 | |||
| 2150299-2 | TE Connectivity | OCEAN_2.0_APPLICATOR-E-104F140 |
| 0 | ||
| 150290-0021 | ITT Interconnect Solutions | 1502900021 | 0 | |||
| 2842502-9 | TE Connectivity | 9P TB HDR VT (180) 3.81, GN RoHS : Compliant | 0 | |||
![]() PEI Genesis | GM44785029 | Amphenol PCD |
| 0 | ||
| 956-312-502924 | Amphenol Corporation | RoHS : Unknown |
| 0 | ||
| 93-735029-01K | Amphenol Corporation |
| 0 | |||
| 93-735029-12S | Amphenol Corporation |
| 0 | |||
| 10-584650-29P | Amphenol Corporation |
| 0 | |||
| 10-584650-29S | Amphenol Corporation |
| 0 | |||
| 25502.9 | CONTA-CLIP Inc |
| 0 | |||
| 93-735029-01S | Amphenol Corporation |
| 0 | |||
| 93-735029-08S | Amphenol Corporation |
| 0 | |||
| 85102E145P5029 | SOURIAU-SUNBANK | RoHS : Compliant |
| 0 | ||
| 85106P145S5029 | SOURIAU-SUNBANK | RoHS : Compliant |
| 0 | ||
| 93-735029-08P | Amphenol Corporation |
| 0 | |||
| S982-C1810-1.50-29 | SOURIAU-SUNBANK |
| 0 | |||
| 21A25029 | SOURIAU-SUNBANK |
| 0 | |||
| 150290-0074 | ITT Interconnect Solutions |
| 0 | |||
![]() PUI | 12.85029 | 24,721 | ||||
![]() Chip 1 Exchange | 35965-0290 | Molex | INSTOCK | 738,732 | ||
| 50-29-1758 | Molex | INSTOCK RoHS : Compliant | 78,014 | |||
| 50-29-1907 | Molex | INSTOCK RoHS : Compliant | 61,399 | |||
| 50-29-1662 | Molex | INSTOCK RoHS : Compliant | 26,297 | |||
| 50-29-1650 | Molex | INSTOCK | 7,800 | |||
| ACW6229-0.50-2/9-0CK0429 | TE Connectivity | INSTOCK | 4,462 | |||
| 5-445029-1 | TE Connectivity | INSTOCK RoHS : Compliant | 2,449 | |||
| 7105-0292 | INSTOCK | 1,986 | ||||
| MF-SM150-2-99 | Bourns Inc | INSTOCK RoHS : Compliant | 1,648 | |||
| 50298- | INSTOCK | 263 | ||||
| MAF95029 | Qnity Laird | INSTOCK RoHS : Compliant | 161 | |||
| 8-1415029-1 | INSTOCK | 70 | ||||
| 550-2950-29-02-00 | INSTOCK | 64 | ||||
| 85107A84P5029 | INSTOCK | 25 | ||||
| MF-SM050-2-99 | INSTOCK | 16 | ||||
![]() Avnet Abacus | 9-1415029-1 | TE Connectivity | Electromechanical Relay SPDT 15A 24VDC 16KOhm Through Hole (Alt: 9-1415029-1) RoHS : Compliant | 13,860 | ||
| 8-1415029-1 | TE Connectivity | Electromechanical Relay SPDT 15A 12VDC 400Ohm Through Hole (Alt: 8-1415029-1) RoHS : Compliant | 7,350 | |||
| 50291559 | Molex | (Alt: 50291559) RoHS : Compliant | 0 | |||
| 50291559 | Molex | (Alt: 50291559) RoHS : Compliant | 0 | |||
| 13105029 | nVent Schroff | ACDC Front End Power Supply PSU 2 Outputs Fixed 58 W 24 V 12 A (Alt: 13105029) RoHS : Compliant | 0 | |||
| 50291692 | Molex | (Alt: 50291692) RoHS : Compliant | 0 | |||
| 5502986-1 | TE Connectivity | AMP55029861 (Alt: 5502986-1) RoHS : Compliant | 0 | |||
| 2150299-2 | TE Connectivity | (Alt: 2150299-2) RoHS : Not Compliant | 0 | |||
| 350291KFT | TE Connectivity | SMD Chip Resistor 91 kOhm 1 2 W 2010 5025 Metric Thick Film High Power (Alt: 2-2176398-1) RoHS : Compliant | 0 | |||
| 2842502-9 | TE Connectivity | 9P TB HDR VT 180 381 GN (Alt: 2842502-9) RoHS : Compliant | 0 | |||
| 7-2150299-7 | TE Connectivity | (Alt: 7-2150299-7) RoHS : Not Compliant | 0 | |||
| 50294-5240E | Amphenol Corporation | Conn DIN 41612 RCP 240 POS 254mm Solder RA ThruHole (Alt: 50294-5240E) RoHS : Not Compliant | 0 | |||
| 8-1437502-9 | TE Connectivity | (Alt: 8-1437502-9) RoHS : Compliant | 0 | |||
| 8-2150298-4 | TE Connectivity | (Alt: 8-2150298-4) RoHS : Not Compliant | 0 | |||
| 009159003502906 | Kyocera AVX Components | (Alt: 009159003502906) RoHS : Compliant | 0 | |||
![]() Avnet Asia | B39262M5029D310 | Qualcomm RFFE Filter Products | (Alt: B39262M5029D310) RoHS : Compliant | 1,000 | ||
| JX310-50292 | Amphenol Corporation | CONN BP PRESS FIT 99P (Alt: JX310-50292) RoHS : Compliant | 0 | |||
| JX310-50296 | Amphenol Corporation | CONN XCEDE HD BP PF 189P RT (Alt: JX310-50296) RoHS : Compliant | 0 | |||
| JX610-50299 | Amphenol Corporation | (Alt: JX610-50299) RoHS : Compliant | 0 | |||
| JX310-50294 | Amphenol Corporation | CONN BP PRESS FIT 77P (Alt: JX310-50294) RoHS : Compliant | 0 | |||
| 1-2250290-4 | Bel Fuse | Conn RJ45 Receptacle 12 POS 2.032mm Solder RA Through Hole 18 Terminal Single Port Tray (Alt: 1-2250290-4) RoHS : Compliant | 0 | |||
| 0359650292 | Molex | Terminal Position Assurance Retainer, 35965 Series, Nylon, Red, VersaBlade, -40 to 120 ?C (Alt: 0359650292) RoHS : Compliant | 0 | |||
| W5029 | Pulse Electronics Corporation | (Alt: W5029) RoHS : Compliant |
| 0 | ||
| GP820-50298 | Amphenol Corporation | (Alt: GP820-50298) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MJE15029G![]() | onsemi | 80 A 120 V PNP Bipolar Power Transistor ONSSPCTRNSTLT1T0R (Alt: MJE15029G) RoHS : Compliant | 0 | ||
| MP5029GD-C-Z | Monolithic Power Systems | (Alt: MP5029GD-C-Z) RoHS : Compliant | 0 | |||
| MPQ5029GD-AEC1-Z | Monolithic Power Systems | (Alt: MPQ5029GD-AEC1-Z) RoHS : Compliant | 0 | |||
| MPQ5029GD-C-AEC1-Z | Monolithic Power Systems | (Alt: MPQ5029GD-C-AEC1-Z) RoHS : Compliant | 0 | |||
| MPQ5029GD-C-AEC1-Z-CUT | Monolithic Power Systems | MPQ5029GD USB TYPEC CURRENT L (Alt: MPQ5029GD-C-AEC1-Z-CUT) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | P35029-1 | DB Unlimited | Piezo Bender |
| 0 | |
![]() Chip-Germany GmbH | 553585029 | Molex | 90 | |||
![]() Component Electronics, Inc | MF-SM150-2-99 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,461 | |
| 0050291692 | Molex | IN STOCK SHIP TODAY |
| 200 | ||
| 50-29-1602 | Molex | IN STOCK SHIP TODAY |
| 200 | ||
| 50-29-8013 | Molex | IN STOCK SHIP TODAY |
| 158 | ||
| CA550-2960-44-02-00 | Cambion Electronics Ltd | IN STOCK SHIP TODAY | 100 | |||
| 50-29-1061 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 93 | ||
| ZW-25-10-G-D-250-290 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant | 10 | |||
| 0950-2925 | Hewlett Packard Co | IN STOCK SHIP TODAY | 1 | |||
| 68-5029 | International Rectifier | IN STOCK SHIP TODAY | 1 | |||
| 502977-1 | TE Connectivity | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | 5029 | Heyco | NON POL BULKL MUST ODR W/5031 | 0 | ||
| 13RS075029B | Essentra Components | ROUND SPACER, .370 ID, .750 OD | 0 | |||
| 17W05029 | Essentra Components | FLAT WASHER, .333 ID, .513 OD, | 0 | |||
| 78230-050295 | Avdel | RNDEL-ARRETIERSCHRAUBE M3 F.C- | 0 | |||
| 20595029 | Essentra Components | 28MM.8-3MMWT ROUND TUBE INSERT | 0 | |||
| PK-0-50293-CF306 | Southco | 0 | ||||
| 78201-050291 | Avdel | BOWL TOOLING ASSY FR TAG-Z-20 | 0 | |||
| M5029 | Heyco | AL CG NPT 3/4-188-2 | 0 | |||
| PK-0-50293-CF310 | Southco | 0 | ||||
| 20425029 | Essentra Components | FOLDING HANDLE, SPRING LOADED | 0 | |||
| G5029 | Heyco | 0 | ||||
| 17W05029B | Essentra Components | FLAT WASHER, .333 ID, .513 OD, | 0 | |||
| 07265-02900 | Avdel | 07265 SB TL - A-KIT PRT | 0 | |||
| 13RS075029 | Essentra Components | ROUND SPACER, .370 ID, .750 OD | 0 | |||
![]() EBV Elektronik | HLMP-5029 | Broadcom Limited | Right Angle Mount Housing for 5mm T1 34 LEDs (Alt: HLMP-5029) RoHS : Compliant | 22,000 | ||
MJE15029G![]() | onsemi | 80 A 120 V PNP Bipolar Power Transistor ONSSPCTRNSTLT1T0R (Alt: MJE15029G) RoHS : Compliant | 0 | |||
| B50292B0KQLEG | Broadcom Limited | B50292 B0 IS AN OCTAL GPHY (Alt: B50292B0KQLEG) RoHS : Compliant | 0 | |||
| B50292B0IQLEG | Broadcom Limited | B50292B0IQLEG (Alt: B50292B0IQLEG) RoHS : Compliant | 0 | |||
| B50296B0IQLEG | Broadcom Limited | Communication ICs (Alt: B50296B0IQLEG) RoHS : Compliant | 0 | |||
| BCM50296B0KQLEG | Broadcom Limited | Quad QSGMII CopperFiber Gigabit Ethenet Transceiver (Alt: BCM50296B0KQLEG) RoHS : Compliant | 0 | |||
DSC1001AI5-029.4912![]() | Microchip Technology Inc | MEMS Oscillator 294912 MHz SMD 7mm x 5mm 10 ppm 33 V DSC1001 (Alt: DSC1001AI5-029.4912) RoHS : Compliant | 0 | |||
DSC1001DI5-029.4912T![]() | Microchip Technology Inc | MEMS Oscillator 294912 MHz SMD 25mm x 2mm 10 ppm 33 V DSC1001 (Alt: DSC1001DI5-029.4912T) RoHS : Compliant | 0 | |||
| C15029_FLORENTINA-4X1-HLD | LEDIL | Holderrectang0 Pos16967x4967mm D (Alt: C15029_FLORENTINA-4X1-HLD) RoHS : Compliant | 0 | |||
![]() Flip Electronics | MJE15029G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 130 | ||
![]() Master Electronics | 5029 | GC Electronics | Specialty Tools Hexagon Key Wrench RoHS : Not Compliant |
| 1 | |
| HTSW-150-29-FM-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 095-850-292-072 | Amphenol RF | RF / Coaxial Cable Assembly BNC Plug to BNC Plug RG58 50 ohm 72 1.8 m RoHS : Compliant |
| 0 | ||
| 7-2150293-7 | TE Connectivity | OC-100F155F-CRIMPTOOLINGKIT RoHS : Not Compliant |
| 0 | ||
| 5-1879502-9 | TE Connectivity | CRGH2512 5% 3M6 2W MOQ Reduction RoHS : Compliant |
| 0 | ||
| 5029028 | Phoenix Contact | Bridge screw - M3 - length: 30.3 mm - width: 4.75 mm - color: blue RoHS : Compliant |
| 0 | ||
| 04-0975-0296 | TE Connectivity | PT9150-0100-121-4140 RoHS : Compliant |
| 0 | ||
CPI-5029-105T![]() | Same Sky | 50 mm 12 Vdc 105 dB Through Hole Driving Circuit Piezo Audio Indicator Buzzer RoHS : Compliant |
| 0 | ||
| FW-16-05-G-D-250-290-A | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| ZW-07-10-G-D-250-290 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 155850-2945 | ITT Interconnect Solutions | Connector Miniature Circular Pin 6 Position Solder Cup Straight Flange Mount 6 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 155850-2990 | ITT Interconnect Solutions | Connector Miniature Circular Socket 10 Position Solder Cup Straight Flange Mount 10 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 1605029 | Phoenix Contact | Sleeve housing for cable connector straight Screw locking M23 shielded: No RoHS : Compliant |
| 0 | ||
| 121095-0293-W | ITT Interconnect Solutions | Circular Connector - Box Mount - Contact Arrangement: 28-16 - Sockets - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
| 065029-0013 | ITT Interconnect Solutions | Conn MIL-C-26482 Circular PIN 10 POS Crimp ST Cable Mount 10 Terminal 1 Port RoHS : Not Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE38502-9 | Pasternack Enterprises | Key Specifications, Connector Series 1: UMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 9 inches. UMCX Plug to MCX Plug Right Angle Cable 9 Inch Length Using RG178 Coax., Radio frequency assembly UMCX plug to MCX plug right angle cable 9 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. UMCX plug to MCX plug right angle cable 9 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UMCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle UMCX cable connection on one end and right angle MCX cable connection on the other. Our right angle UMCX to right angle MCX cable assemblies have a plug gender on end 1 and plug on end 2. This UMCX to MCX cable is a plug to plug coax assembly, PE38502-9, can also be known as a right angle UMCX male to right angle MCX male cable assembly and will be shipped same-day as it is purchased. UMCX male to MCX male cable assembly PE38502-9 is built with RG178 which is a flexible coax type. The Pasternack flexible UMCX cable assembly is manufactured with right angle UMCX to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this UMCX right angle plug to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38502-9 can also be used in the other direction and will be right angle MCX plug to right angle UMCX plug cable assembly if the opposite connectivity is required. UMCX right angle male to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UMCX to MCX cable assembly for quick shipment worldwide. Variations of UMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UMCX plug to MCX plug right angle cable 9 inch length using RG178 coax. |
| 21 | |
| PE15A5029 | Pasternack Enterprises | Key Specifications, Frequency, Min: 0.5 MHz, Frequency, Max: 500 MHz, Gain, Min: 40 dB, Gain, Typical: 44 dB, 1dB Compression Point, Min: 36 dBm, 3rd Intercept Point, Typ: 42 dB, Voltage, DC Typ: 28 Volts, Current, DC Typ: 2,000 mA. 44 dB Gain, 8 Watt Psat, 0.5 MHz to 500 MHz, High Power LDMOS Amplifier, SMA Input, SMA Output, 42 dBm IP3, Class A/AB. RF solid state power amplifier (SSPA) PE15A5029 from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a high power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 8 Watts. Pasternack solid state power amplifier part number PE15A5029 SMA high power amp has a 40 dB minimum gain and 44 dB typical gain. The high power high gain amp is rated with a Psat of 39 dBm. Our radio frequency high power solid state amplifier is constructed for minimum frequency of 0.5 MHz and a maximum frequency of 500 MHz. Additional radio frequency specs on this high gain high power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our high power high gain amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This high power 8 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs. |
| 1 | ||
| PE3W15029-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. NEX10 Male to QMA Male Low PIM Cable 24 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly NEX10 male to QMA male low PIM cable 24 inch length using 1/4 inch superflexible coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to QMA male low PIM cable 24 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a QMA cable connection on the other. Our low PIM NEX10 to QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W15029-24 can also be known as a low PIM NEX10 plug to QMA plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15029-24 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 120 dB. Our NEX10 male to QMA male cable has a maximum VSWR of 1.4:1. NEX10 plug to QMA plug cable assembly PE3W15029-24 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to QMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W15029-24 can also be used in the other direction and will be a QMA male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to QMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to QMA cable assembly for quick shipment worldwide. Variations of NEX10 and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to QMA low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE35029/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to BNC Female Bulkhead Cable Using RG316-DS Coax with HeatShrink. PE35029/HS is a BNC female bulkhead to BNC female bulkhead cable using RG316-DS coax. This Pasternack BNC female bulkhead to BNC female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our female BNC bulkhead to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE35029/HS BNC female bulkhead to BNC female bulkhead cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE3W15029 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm. NEX10 Male to QMA Male Low PIM Cable Using 1/4 inch Superflexible Coax., Radio frequency assembly NEX10 male to QMA male low PIM cable using 1/4 inch superflexible coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to QMA male low PIM cable using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a QMA cable connection on the other. Our low PIM NEX10 to QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W15029 can also be known as a low PIM NEX10 plug to QMA plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15029 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 120 dB. Our NEX10 male to QMA male cable has a maximum VSWR of 1.4:1. NEX10 plug to QMA plug cable assembly PE3W15029 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to QMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W15029 can also be used in the other direction and will be a QMA male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to QMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to QMA cable assembly for quick shipment worldwide. Variations of NEX10 and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to QMA low PIM RF cable assembly as per your requirements. | 0 | |||
| PE3W25029 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male to Reverse Polarity TNC Male Cable Using LMR-400 Coax. PE3W25029 is a N male to reverse polarity TNC male cable using LMR-400 coax. This Pasternack N male to reverse polarity TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25029 N male to TNC reverse polarity male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C5029 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. 3.5mm Female to SMA Female Cable Using RG402 Coax., Radio frequency assembly 3.5mm female to SMA female cable using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm female to SMA female cable using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and SMA cable connection on the other. Our 3.5mm to SMA cable assemblies have a female gender on end 1 and female on end 2. This 3.5mm to SMA cable is a female to female coax assembly, PE3C5029, can also be known as a 3.5mm jack to SMA jack cable assembly and will be shipped same-day as it is purchased. 3.5mm jack to SMA jack cable assembly PE3C5029 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3.5mm female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5029 can also be used in the other direction and will be SMA female to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to SMA cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm female to SMA female cable using RG402 coax. | 0 | |||
| PE3W15029-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. NEX10 Male to QMA Male Low PIM Cable 60 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly NEX10 male to QMA male low PIM cable 60 inch length using 1/4 inch superflexible coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to QMA male low PIM cable 60 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a QMA cable connection on the other. Our low PIM NEX10 to QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W15029-60 can also be known as a low PIM NEX10 plug to QMA plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15029-60 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 120 dB. Our NEX10 male to QMA male cable has a maximum VSWR of 1.4:1. NEX10 plug to QMA plug cable assembly PE3W15029-60 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to QMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W15029-60 can also be used in the other direction and will be a QMA male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to QMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to QMA cable assembly for quick shipment worldwide. Variations of NEX10 and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to QMA low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W05029LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to Reverse Polarity SMA Female Bulkhead Cable Using LMR-195 Coax, LF Solder. PE3W05029LF is a reverse polarity SMA male right angle to reverse polarity SMA female bulkhead cable using LMR-195 coax. This Pasternack reverse polarity SMA male right angle to reverse polarity SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to reverse polarity female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05029LF SMA reverse polarity male right angle to SMA reverse polarity female bulkhead cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W05029/BL | Pasternack Enterprises | 0 | ||||
| PE3W05029 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to Reverse Polarity SMA Female Bulkhead Cable Using LMR-195 Coax. PE3W05029 is a reverse polarity SMA male right angle to reverse polarity SMA female bulkhead cable using LMR-195 coax. This Pasternack reverse polarity SMA male right angle to reverse polarity SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to reverse polarity female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05029 SMA reverse polarity male right angle to SMA reverse polarity female bulkhead cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W15029-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. NEX10 Male to QMA Male Low PIM Cable 48 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly NEX10 male to QMA male low PIM cable 48 inch length using 1/4 inch superflexible coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to QMA male low PIM cable 48 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a QMA cable connection on the other. Our low PIM NEX10 to QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W15029-48 can also be known as a low PIM NEX10 plug to QMA plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15029-48 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 120 dB. Our NEX10 male to QMA male cable has a maximum VSWR of 1.4:1. NEX10 plug to QMA plug cable assembly PE3W15029-48 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to QMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W15029-48 can also be used in the other direction and will be a QMA male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to QMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to QMA cable assembly for quick shipment worldwide. Variations of NEX10 and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to QMA low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W15029-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. NEX10 Male to QMA Male Low PIM Cable 12 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly NEX10 male to QMA male low PIM cable 12 inch length using 1/4 inch superflexible coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to QMA male low PIM cable 12 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a QMA cable connection on the other. Our low PIM NEX10 to QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W15029-12 can also be known as a low PIM NEX10 plug to QMA plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15029-12 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 120 dB. Our NEX10 male to QMA male cable has a maximum VSWR of 1.4:1. NEX10 plug to QMA plug cable assembly PE3W15029-12 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to QMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W15029-12 can also be used in the other direction and will be a QMA male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to QMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to QMA cable assembly for quick shipment worldwide. Variations of NEX10 and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to QMA low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE35029 | Pasternack Enterprises | 0 | ||||
| PE35029LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to BNC Female Bulkhead Cable Using RG316-DS Coax, LF Solder. PE35029LF is a BNC female bulkhead to BNC female bulkhead cable using RG316-DS coax. This Pasternack BNC female bulkhead to BNC female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our female BNC bulkhead to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE35029LF BNC female bulkhead to BNC female bulkhead cable assembly is constructed with RG316-DS coax. | 0 | |||
![]() Vyrian | MF-SM050-2-99 | Bourns Inc | PTC Resettable Fuse, Surface Mount RoHS : Compliant | 18,282 | ||
| MF-R050-2-99 | Bourns Inc | PTC Resettable Fuse, 60V, Through Hole Mount RoHS : Compliant | 14,816 | |||
| MAX15029AGA-VS | Analog Devices (Maxim Integrated) | 12,007 | ||||
| MF-SM250-2-99 | Bourns Inc | PTC Resettable Fuse, Surface Mount RoHS : Compliant | 11,233 | |||
| LV5029MD-BH | onsemi | Display Driver, BICMOS, PDSO10 RoHS : Compliant | 10,680 | |||
| MAX15029ATB+ | Analog Devices Inc | Adjustable Positive LDO Regulator, 0.5V Min, 3.3V Max, 0.15V Dropout, BICMOS, PDSO10 RoHS : Compliant | 10,402 | |||
| MAX15029ATB+T | Analog Devices Inc | Adjustable Positive LDO Regulator, 0.5V Min, 3.3V Max, 0.15V Dropout, BICMOS, PDSO10 RoHS : Compliant | 8,509 | |||
| MAX15029ATB-VY | Analog Devices (Maxim Integrated) | 6,728 | ||||
| MAX15029ATB-V-T | Analog Devices (Maxim Integrated) | 6,273 | ||||
| MAX15029AGA/VY+ | Analog Devices Inc | Adjustable Positive LDO Regulator, 0.5V Min, 3.3V Max, 0.15V Dropout, BICMOS, PDSO8 RoHS : Compliant | 5,829 | |||
| MAX15029ATB-T | Analog Devices (Maxim Integrated) | 5,759 | ||||
| MAX15029AGA-VS-T | Analog Devices (Maxim Integrated) | 5,297 | ||||
| MAX15029AGA-VY | Analog Devices (Maxim Integrated) | 5,202 | ||||
MAX15029AGA/VY+T![]() | Maxim Integrated Products | Adjustable Positive LDO Regulator, 0.5V Min, 3.3V Max, 0.15V Dropout, BICMOS, PDSO8 RoHS : Compliant | 607 | |||
| MF-R250-2-99 | Bourns Inc | PTC Resettable Fuse, 30V, Through Hole Mount RoHS : Compliant | 122 | |||
![]() Waytek, Inc. | 5029 | Blue Sea Systems | ST Blade Fuse Block ATO ATC 12 Circuits & Cover **RETAIL** 100A PER BLOCK 30A PER CIRCUIT |
| 40 | |
![]() Win Source Electronics | MF-SM050-2-99 | Bourns Inc | FUSE RESETTABLE RoHS : Compliant |
| 32,020 | |
| FSMD050-2920 | Fuzetec Technology Co Ltd |
| 10,000 | |||
| FSMD050-2920-R | Fuzetec Technology Co Ltd | RESETTABLE FUSE - SMD, 2920 SIZE RoHS : Compliant |
| 9,320 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |