 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
496G-AE3-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | 770849-6 | TE Connectivity | Conn Housing Unsealed Receptacle 6 POS 3.96mm ST Cable Mount - Bag (Alt: 770849-6) RoHS : Compliant |
| 10,003 | |
| TLE49642MXTSA1 | Infineon Technologies AG | - Tape and Reel (Alt: TLE49642MXTSA1) RoHS : Compliant |
| 6,000 | ||
| STM32L496VGY6TR | STMicroelectronics | - Tape and Reel (Alt: STM32L496VGY6TR) RoHS : Not Compliant |
| 5,000 | ||
| TLE49613MXTSA1 | Infineon Technologies AG | Hall Effect Switch, 7.5 mT, -7.5 mT, 3 V to 32 V, 3 Pins, SOT-23 - Tape and Reel (Alt: TLE49613MXTSA1) RoHS : Compliant |
| 3,000 | ||
| CX496122-CQZR | Cirrus Logic | CUSTOM CS496122-CQZR FOR CROWN - Tape and Reel (Alt: CX496122-CQZR) RoHS : Compliant |
| 1,500 | ||
| M85049/69-11A | Glenair Inc | - Bulk (Alt: M85049/69-11A) RoHS : Not Compliant |
| 586 | ||
| 749611-1 | TE Connectivity | - Rail/Tube (Alt: 749611-1) RoHS : Not Compliant |
| 246 | ||
| JANTX1N4960 | Microchip Technology Inc | Diode Zener Single 12V 5% 5W 2-Pin E-Case Axial Thru-Hole Bag - Bulk (Alt: JANTX1N4960) RoHS : Not Compliant |
| 110 | ||
| 5749621-7 | TE Connectivity | - Bulk (Alt: 5749621-7) RoHS : Compliant |
| 72 | ||
| MCP6496UT-E/OT | Microchip Technology Inc | OP Amp Single 40V/us 1.8V to 5.5V 5-Pin SOT-23 T/R - Tape and Reel (Alt: MCP6496UT-E/OT) RoHS : Not Compliant |
| 50 | ||
| A85049602G10N | Amphenol Corporation | - Bulk (Alt: A85049602G10N) RoHS : Not Compliant |
| 14 | ||
| STM32L496ZGT3 | STMicroelectronics | - Bulk (Alt: STM32L496ZGT3) RoHS : Not Compliant |
| 10 | ||
| A85049602G10A | Amphenol Corporation | - Bulk (Alt: A85049602G10A) RoHS : Not Compliant |
| 7 | ||
| M85049/69-11N | Glenair Inc | - Bulk (Alt: M85049/69-11N) RoHS : Not Compliant |
| 3 | ||
| ASP-149651-03 | Samtec Inc | APPLICATION SPECIFIC PRODUCT - Bulk (Alt: ASP-149651-03) RoHS : Compliant | 1 | |||
 Newark | A4964KEVTR-J | Allegro MicroSystems LLC | Motor Controller, 3-Ph Bldc, Qfn-36; |Allegro Microsystems A4964KEVTR-J RoHS : Compliant |
| 9,635 | |
| A4964KEVTR-J | Allegro MicroSystems LLC | Motor Controller, 3-Ph Bldc, Qfn-36; |Allegro Microsystems A4964KEVTR-J RoHS : Compliant |
| 9,635 | ||
| B82496C3120J000 | TDK Corporation | Inductor, 12Nh, 5Ghz, 0603; |Tdk B82496C3120J000 RoHS : Compliant |
| 7,718 | ||
| B82496C3120J000 | TDK Corporation | Inductor, 12Nh, 5Ghz, 0603; |Tdk B82496C3120J000 RoHS : Compliant |
| 7,718 | ||
| B82496C3470J000 | TDK Corporation | Inductor, 47Nh, 0603 Case; |Tdk B82496C3470J000 RoHS : Compliant |
| 7,715 | ||
| B82496C3470J000 | TDK Corporation | Inductor, 47Nh, 0603 Case; |Tdk B82496C3470J000 RoHS : Compliant |
| 7,715 | ||
| 10776496 | Aptiv PLC | Auto Conn Housing, Rcpt, 24Pos, Pbt; |Aptiv/delphi 10776496 RoHS : Compliant |
| 360 | ||
| MP005496 | SPC Multicomp | Fuse, Time Delay, 1A, 125V, 2410; |Multicomp Pro MP005496 RoHS : Compliant |
| 250 | ||
| MP005496 | SPC Multicomp | Fuse, Time Delay, 1A, 125V, 2410; |Multicomp Pro MP005496 RoHS : Compliant |
| 250 | ||
| 2496721-1 | TE Connectivity | Rj45 Conn, R/A Jack, 8P8C, 4Gang, Tht; |Te Connectivity 2496721-1 RoHS : Compliant |
| 48 | ||
| T0054449699 | Weller Hand Tools GmbH | Lt 1Snw Soldering Tip 0.1Mm Chromed; |Weller (Apex Tool Group) T0054449699 RoHS : Compliant |
| 47 | ||
| S2GO2HALLTLE4966KTOBO1 | Infineon Technologies AG | Eval Board, Magnetic Position Sensor; |Infineon Technologies S2GO2HALLTLE4966KTOBO1 RoHS : Compliant |
| 17 | ||
| 7211 496 | Altech Corporation | Gland Locknut, Nyl 6, Blk, 1/2" Npt Thk; Thread Size:1/2" Npt; Material:Nylon 6 (Polyamide 6); Locknut Plating:-; Thickness:6Mm; Product Range:-; Thread Size - Imperial:1/2" Npt Rohs Compliant: Yes |Altech 7211 496 RoHS : Compliant |
| 13 | ||
| 103014967 | Schmersal | Limit Switch, 1No/2Nc, 240Vac, 24Vdc; |Schmersal 103014967 RoHS : Compliant |
| 1 | ||
| 496 | Keystone Electronics Corp | Handle; |Keystone 496 RoHS : Compliant |
| 0 | ||
 Analog Devices Inc | MAX4968CEXB+ | Analog Devices Inc | 16Ch High voltage switch in VG RoHS : Compliant |
| 2,541 | |
AD8496CRMZ-R7 | Analog Devices Inc | Thermocouple Amplifier RoHS : Compliant |
| 2,000 | ||
| LT3496EFE#TRPBF | Analog Devices Inc | 3x Out LED Drvr RoHS : Compliant |
| 2,000 | ||
| MAX6496ATA+T | Analog Devices Inc | 72V, Overvoltage-Protection Sw RoHS : Compliant |
| 1,418 | ||
| LTC2496CUHF#PBF | Analog Devices Inc | 16-B 8-/16-Ch DS ADC w/ Easy D RoHS : Compliant |
| 1,166 | ||
ADA4960-1ACPZ-R7 | Analog Devices Inc | 5GHz Low Distortion ADC Driver RoHS : Compliant |
| 312 | ||
| MAX1496EAI+ | Analog Devices Inc | 3.5- and 4.5-Digit, Single-Chi RoHS : Compliant |
| 277 | ||
| LT1496HS#PBF | Analog Devices Inc | 1.5uA Max, 1x, 2x & 4x Prec R2 RoHS : Compliant |
| 131 | ||
| MAX4968BEXB+T | Analog Devices Inc | 16-Channel, Linear, High-Volta RoHS : Compliant |
| 0 | ||
| LT1496HS#TRPBF | Analog Devices Inc | 1.5uA Max, 1x, 2x & 4x Prec R2 RoHS : Compliant |
| 0 | ||
| LT3496HUFD#TRPBF | Analog Devices Inc | 3x Out LED Drvr RoHS : Compliant |
| 0 | ||
| LT1496CS#TRPBF | Analog Devices Inc | 1.5uA Max, 1x, 2x & 4x Prec R2 RoHS : Compliant |
| 0 | ||
| LTC2496IUHF#TRPBF | Analog Devices Inc | 16-B 8-/16-Ch DS ADC w/ Easy D RoHS : Compliant |
| 0 | ||
| MAX4967EGEE/V+T | Analog Devices Inc | USB Automotive Protector (Anal | 0 | |||
| MAX6496ATA/V+T | Analog Devices Inc | 72V, Overvolt-Protect Switches RoHS : Compliant |
| 0 | ||
 RS | 7211 496 | Altech Corporation | CABLE GLAND, POLYAMIDE, LOCKNUT, 6MM THICKNESS, NPT 1/2 THREAD, 7211 SERIES |
| 1,113 | |
| HY54 (4496607) | 3M | PELTOR OPTIME III EARMUFF HYGIENE KIT, HEARING PROTECTION, H9 SERIES |
| 115 | ||
| 4967 (FILP 3.0) | Heyco | FILTER INSERT LOUVERED PLUG, NYLON, 3.1700 D X 0.8200 H IN, FILP SERIES |
| 101 | ||
| 1934968 (PT 1 5/12-PVH-5 0) | Phoenix Contact | PCB PLUG SCREW 5MM 16AWG 400V 12A 12 POSITION COMBICON PT SERIES |
| 50 | ||
| 2496847 | RS Pro | LONG STRAIGHT LEVER MICROSWITCH, SPDT, QUICK CONNECT TERMINAL, 16A@250VAC, IP40 |
| 14 | ||
| 1964967 | RS Pro | NITRILE RUBBER O-RING SEAL, 10MM BORE, 15MM OUTER DIAMETER |
| 11 | ||
| 4964-SS-12 (1915807) | Pomona Electronics | CABLE BNC MALE LOW NOISE 12" |
| 3 | ||
| 1964964 | RS Pro | NITRILE RUBBER O-RING SEAL, 8.5MM BORE, 13.5MM OUTER DIAMETER |
| 2 | ||
| SLM10P6Q (74966) | Banner Engineering Corp | SENSOR, RUGGED METAL, FIXED-DISTANCE, 10MM SLOT, 10-30VDC, PNP, M8 QDC, 74966 |
| 2 | ||
| 49605-14P | Leviton Manufacturing Co | WIRELESS 14" ENCLOSURE WITH VENTED HINGED DOOR |
| 1 | ||
| BF22/4-9699A (036869) | PEPPERL+FUCHS GmbH | CORDSET, CABLES/ACCESSORIES, 036869 |
| 1 | ||
| 4960702NU (49607-02NU) | Siemens | TALON 320A 7J RGLS 1POS LVRBPS MS OH/UG ; 49607-02NU |
| 1 | ||
| EM4964-SS-96# (3320931) | Pomona Electronics | BNC (M), LOW NOISE, MTO BULK |
| 1 | ||
| 496 | Keystone Electronics Corp | HANDLE, INSTRUMENTATION, ROUND, BRASS, NICKEL PLATE, 10-32 THREAD, LENGTH 6.00 RoHS : Compliant |
| 0 | ||
| 496 | Koyo Encoder Inc | TAPERED ROLLER BEARINGS, 80.96MM ID, 133.35MM OD |
| 0 | ||
 Microchip Technology Inc | JANS1N4963US | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 1,524 | |
| JANTX1N4967US | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 757 | ||
| 1N4496 | Microchip Technology Inc | Voltage Regulator _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 654 | ||
| 1N4967 | Microchip Technology Inc | Voltage Regulator _ B-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 484 | ||
| JANTXV1N4963 | Microchip Technology Inc | Voltage Regulator _ B-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 396 | ||
| JANTXV1N4960US | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 300 | ||
| CD4960 | Microchip Technology Inc | Voltage Regulator _ Die, Projected EOL: 2049-02-05 |
| 288 | ||
| JANTXV1N4961US | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 283 | ||
| JANTX1N4496 | Microchip Technology Inc | Voltage Regulator _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 235 | ||
| JANS1N4965US | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 211 | ||
| JANS1N4960US | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 205 | ||
| 1N4969 | Microchip Technology Inc | Voltage Regulator _ B-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 192 | ||
| JAN1N4963 | Microchip Technology Inc | Voltage Regulator _ B-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 145 | ||
| JANTXV1N4962US | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 100 | ||
| JAN1N4496 | Microchip Technology Inc | Voltage Regulator _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 91 | ||
 Rochester Electronics | SMBZ1496LT1G | onsemi | Zener Regulating Diode, 0.225W, SOT23 RoHS : Compliant |
| 9,000 | |
| TLV49613TAXBXA1 | Infineon Technologies AG | Hall Effect Sensor, -10.4mT Min, 10.4mT Max, 0-25mA, Rectangular, 3 Pin, Through Hole Mount RoHS : Compliant |
| 136,617 | ||
| A2C01649600A | Infineon Technologies AG | STD SPI |
| 4,350 | ||
| TLE49642KXTSA1 | Infineon Technologies AG | TLE4964 - Hall Switch RoHS : Compliant |
| 303,000 | ||
TLE49644MXTMA1 | Infineon Technologies AG | Solid State Magnetic Sensor Unipolar Switch Hall Effect SOT-23-3 T/R RoHS : Compliant |
| 105,436 | ||
| TLE49642MXTSA1 | Infineon Technologies AG | Solid State Magnetic Sensor Unipolar Switch Hall Effect SOT-23-3 T/R RoHS : Compliant |
| 2,466 | ||
| CS496102-CQZ | Cirrus Logic | CS496102 - DSP - CobraNet IC CobraNet Networking Processor |
| 802 | ||
| CS496122-IQZR/A1 | Cirrus Logic | CS4961 - Digital Audio NetworkingProcessor |
| 72 | ||
CY8C20496A-24LQXI | Cypress Semiconductor | Multifunction Peripheral, CMOS RoHS : Compliant |
| 10 | ||
| RF1K4915496 | Fairchild Semiconductor Corporation | Power Field-Effect Transistor, 2A I(D), 60V, 0.13ohm, 2-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MS-012AA RoHS : Not Compliant |
| 4,231 | ||
MAX496CPE+ | Maxim Integrated Products | Buffer Amplifier, 4 Func, CMOS, PDIP16 RoHS : Compliant |
| 25 | ||
| LM1496N | National Semiconductor Corporation | Analog Circuit RoHS : Not Compliant |
| 8,762 | ||
| LM4960SQ | National Semiconductor Corporation | Audio Amplifier, 1 Channel(s), 1 Func, PQCC28 RoHS : Not Compliant |
| 30 | ||
| LM4962TLX/NOPB | National Semiconductor Corporation | Audio Amplifier, 1 Func, PBGA20 RoHS : Compliant |
| 3,000 | ||
| L4964 | STMicroelectronics | L4964 - Power Management-DC-DC SWITCHING RoHS : Compliant |
| 1,350 | ||
 Sager | 496 | Honeywell Sensing and Control / MICRO SWITCH | Speed Sensors ATOM & PROX | 0 | ||
| 496 | Keystone Electronics Corp | Racks & Rack Cabinet Accessories HNDL BRS N PL 6.00 RoHS : Compliant |
| 0 | ||
| ZW-08-14-L-D-496-496 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 3-994962-2 | TE Connectivity | SCREW,HEX SOCKET HEAD,M5X35,FULL THREAD |
| 0 | ||
| 209-2-1-63F-4-9-60 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 219-3-1-65-4-9-60 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| 354969-1 | TE Connectivity | Other Tools SPRING EXTENSION |
| 0 | ||
| 310-99-149-61-001000 | Mill-Max Mfg Corp | IC & Component Sockets Interconnect Socket | 0 | |||
| 2473249-6 | TE Connectivity | 1.25 WTB HDR DIP, 6 POS |
| 0 | ||
| 249-6-C-30-70-30-2-63-2 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 2823549-6 | TE Connectivity | 6P,2MM,PL HDR,DRRT,2.2,0.76AU,TR RoHS : Compliant |
| 0 | ||
| 4-2176349-6 | TE Connectivity | Thick Film Resistors - SMD CRGCQ 2512 56K 1% RoHS : Compliant |
| 0 | ||
| 4-2496750-7 | TE Connectivity | 1.25MM HDR SMT, LOCKING HPI, GOLD, 7P RoHS : Compliant |
| 0 | ||
| HW-20-11-L-D-496-209 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 207496-9 | TE Connectivity | Headers & Wire Housings 4P SOCKET HEADER GLD METRIMATE RoHS : Compliant |
| 0 | ||
 Coilcraft Direct | E3496-AL | Coilcraft Inc | Common mode choke, RoHS RoHS : Compliant |
| 10 | |
| M1496-A | Coilcraft Inc | Power choke, for ON MC34166T, not RoHS RoHS : Not Compliant |
| 6 | ||
| C496 | Coilcraft Inc | Designer's Kit, XGL6030, 20% tolerance, SM power inductors, RoHS, halogen-free RoHS : Compliant |
| 4 | ||
 TME | 34960-0300 | Molex | Connector: automotive; PIN: 102; angled RoHS : Compliant |
| 7,920 | |
| 49623 | HELUKABEL | Wire: control cable; SUPERTRONIC® C-PVC; 5x0.14mm2; grey; Cu; PVC RoHS : Compliant |
| 73 | ||
| 21349697496006 | HARTING Technology Group | Cable: for sensors; PIN: 4; 7/8" male,7/8" female; unshielded RoHS : Compliant |
| 0 | ||
| 21349697496020 | HARTING Technology Group | Cable: for sensors; PIN: 4; 7/8" male,7/8" female; unshielded; 2m RoHS : Compliant |
| 0 | ||
| 21349697496003 | HARTING Technology Group | Cable: for sensors; PIN: 4; 7/8" male,7/8" female; unshielded RoHS : Compliant |
| 0 | ||
| 21349697496010 | HARTING Technology Group | Cable: for sensors; PIN: 4; 7/8" male,7/8" female; straight; plug RoHS : Compliant |
| 0 | ||
| 21349697496015 | HARTING Technology Group | Cable: for sensors; PIN: 4; 7/8" male,7/8" female; unshielded RoHS : Compliant |
| 0 | ||
| 09181249622 | HARTING Technology Group | Connector: IDC; SEK Low Profile; PIN: 24; straight; THT; tinned; PBT RoHS : Compliant |
| 0 | ||
| 09734962804 | HARTING Technology Group | Connector: DIN 41612; socket; female; PIN: 96; angled; THT; 2A RoHS : Compliant |
| 0 | ||
| B82496C3120J000 | TDK Corporation | Inductor: ceramic; SMD; 0603; 12nH; 450mA; R: 350mΩ; ±5%; -55÷150°C RoHS : Compliant |
| 0 | ||
| B82496C3470J000 | TDK Corporation | Inductor: ceramic; SMD; 0603; 47nH; 270mA; R: 950mΩ; ±5%; -55÷150°C RoHS : Compliant |
| 0 | ||
| 21349697597006 | HARTING Technology Group | Cable: for sensors; PIN: 5; 7/8" male,7/8" female; unshielded RoHS : Compliant |
| 0 | ||
| 21349900496030 | HARTING Technology Group | Connector: 7/8"; plug; female; PIN: 4; angled 90°; with lead; TPE-U RoHS : Compliant |
| 0 | ||
| 4-2176349-6 | TE Connectivity | Resistor: thick film; 56kΩ; SMD; 2512; 1W; ±1%; CRGCQ RoHS : Compliant |
| 0 | ||
| 1787496 | Phoenix Contact | Connector: pluggable terminal block; COMBICON S; 250V; PIN: 12 RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | SMBZ1496LT1G | onsemi | 44,435 | |||
| FPF2496UCX | onsemi | FPF2496 Series 1 Channel 5.5 V 105 mOhm SMT General Load Switch - WLCSP-9 RoHS : Compliant | 42,000 | |||
| AFE4960PYBGT | Texas Instruments | RoHS : Compliant | 20,176 | |||
| AFE4960PYBGR | Texas Instruments | RoHS : Compliant | 10,422 | |||
| ASP-115496-03 | Samtec Inc | 6,631 | ||||
| AFE4960YBGT | Texas Instruments | RoHS : Compliant | 2,598 | |||
| RAA2214964GNP#HB0 | Renesas Electronics Corporation | 2,442 | ||||
| TLE49643MXTSA1 | Infineon Technologies AG | SOT23-3/High Precision Automotive Hall Effect Switch RoHS : Compliant | 1,809 | |||
| BD65496MUV-E2 | ROHM Semiconductor | 1ch H桥驱动器 高速驱动型 RoHS : Compliant |
| 250 | ||
| STM32L496RGT6TR | STMicroelectronics | LQFP 64 10X10X1.4 1 RoHS : Compliant | 218 | |||
| RB496KATR | ROHM Semiconductor | Schottky Barrier Diodes RoHS : Compliant |
| 200 | ||
L4963D | STMicroelectronics | IC: driver; DC/DC converter; Uin: 9÷46VDC; Uout: 5.1÷36VDC; 1.5A RoHS : Compliant | 132 | |||
| STM32L496RGT3TR | STMicroelectronics | RoHS : Compliant | 110 | |||
| RB496EATR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
BD4960G-TR | ROHM Semiconductor | RoHS : Compliant |
| 24 | ||
 ComSIT USA | B82496C3129A | AVAILABLE EU | 2,703 | |||
| 49944496 | Murata Manufacturing Co Ltd | AVAILABLE EU | 450 | |||
| TLE49611K | AVAILABLE EU | 9,000 | ||||
| 24496 | WELL GROUP PRODUCTS | AVAILABLE EU | 1,028 | |||
ComSIT USA | B82496A3820J | TDK Electronics | RF CHOKE General Purpose Inductor, 0.082uH, 5%, 1 Element, Ceramic-Core, SMD RoHS : Compliant | 48,000 | ||
| B82496A3330J | TDK Electronics | RF CHOKE General Purpose Inductor, 0.033uH, 5%, 1 Element, Ceramic-Core, SMD RoHS : Compliant | 7,745 | |||
| B82496C3560J | TDK Electronics | SMT INDUCTOR General Purpose Inductor, 0.056uH, 5%, 1 Element, Ceramic-Core, SMD, 0603 RoHS : Compliant | 7,356 | |||
| B82496C3151J | TDK Electronics | SMT INDUCTOR General Purpose Inductor, 0.15uH, 5%, 1 Element, Ceramic-Core, SMD, 0603 RoHS : Compliant | 4,000 | |||
| B82496C3150J | TDK Electronics | SMT INDUCTOR General Purpose Inductor, 0.015uH, 5%, 1 Element, Ceramic-Core, SMD, 0603 RoHS : Compliant | 4,000 | |||
| TLE49642MXTSA1 | Infineon Technologies AG | Solid State Magnetic Sensor Unipolar Switch Hall Effect SOT-23-3 T/R RoHS : Compliant | 3,707 | |||
| T356K226K035AS49617514 | KEMET Corporation | TANTALUM THROUGH-HOLE CAPACITOR Tantalum Capacitor, Polarized, Tantalum (dry/solid), 35V, 10% +Tol, 10% -Tol, 22uF, Through Hole Mount RoHS : Compliant | 3,200 | |||
| L4964 | STMicroelectronics | Switching Regulator, Voltage-mode, 4A, 120kHz Switching Freq-Max, BIPolar, PZFM15 RoHS : Compliant | 2,822 | |||
| ISL32496EIUZT7A | Renesas Electronics Corporation | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO10 RoHS : Compliant | 1,381 | |||
| LM4960SQ | National Semiconductor Corporation | PIEZOELECTRIC SPEAKER DRIVER Audio Amplifier, 1 Channel(s), 1 Func, PQCC28 RoHS : Compliant | 1,000 | |||
| L4962N | STMicroelectronics | Electronic Component RoHS : Not Compliant | 549 | |||
| B39389G4963N201 | TDK Electronics | 38.9 MHZ VESTIGIAL SIDEBAND SAW FILTER SAW-Video/Sound Filter, 1 Function(s), 38.9MHz, 5 Pin(s) RoHS : Compliant | 192 | |||
| 9034966825 | HARTING Technology Group | Board Euro Connector, 96 Contact(s), 3 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Plug RoHS : Compliant | 100 | |||
| LT1496HSPBF | Linear Technology | Operational amplifier, dual, 16-pin SOIC, Linear Technology RoHS : Compliant | 58 | |||
| M85049699A | Amphenol Corporation | Connector Accessory, Boot Adapter, Aluminum Alloy RoHS : Compliant | 2 | |||
 Interstate Connecting Components | 1-1614965-5 | TE Connectivity | CPF 1206 24K 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | |
| 1-1879496-7 | TE Connectivity | CRGH0805 5% 56K 0.33W RoHS : Compliant |
| 0 | ||
| 3-994962-2 | TE Connectivity | SCREW,HEX SOCKET HEAD,M5X35,FU | 0 | |||
| 354969-1 | TE Connectivity | SPRING, EXTENSION |
| 0 | ||
| 22759/32-24-96 | TE Connectivity | 22759/32-24-96 RoHS : Compliant | 0 | |||
| 2473249-6 | TE Connectivity | 1.25 WTB HDR DIP, 6 POS | 0 | |||
| 2823549-6 | TE Connectivity | 6P,2MM,PL HDR,DRRT,2.2,0.76AU, RoHS : Compliant | 0 | |||
| 4-2176349-6 | TE Connectivity | CRGCQ 2512 56K 1% RoHS : Compliant |
| 0 | ||
| 4-2496750-7 | TE Connectivity | 1.25MM HDR SMT, LOCKING HPI, G RoHS : Compliant | 0 | |||
| 4-967629-1 | TE Connectivity | TAB HOUSING, 2.8MM, 18POS. RoHS : Compliant |
| 0 | ||
| 2-1658549-6 | TE Connectivity | FPH-3022T=FLXPAC HDR P 30 ST L RoHS : Compliant |
| 0 | ||
| 207496-9 | TE Connectivity | SKT HDR ASSY,4P,MMATE LF RoHS : Compliant |
| 0 | ||
| 1770-4964-2 | Glenair Inc | HERMETIC MICRO-D ADD $900.00 NASA SCREEN | 0 | |||
| 10612-24-96-F871 | TE Connectivity | 10612-24-96-F871 | 0 | |||
| 796949-6 | TE Connectivity | 6 POS TERMI-BLOK PCB MOUNT RoHS : Compliant |
| 0 | ||
 NexGen Digital | MFU4965CBA21 | 1,548 | ||||
| JANTX1N4967US | Microsemi FPGA & SoC (now Microchip) | 259 | ||||
| JAN1N4496US | Microsemi FPGA & SoC (now Microchip) | 50 | ||||
| L4962/A | STMicroelectronics | RoHS : Compliant | 38 | |||
| L4960 | STMicroelectronics | RoHS : Compliant | 18 | |||
| JANTX1N4968 | Microsemi FPGA & SoC (now Microchip) | 10 | ||||
| JAN1N4964 | Microsemi FPGA & SoC (now Microchip) | 8 | ||||
 PEI Genesis | 10-184964-22U | Amphenol Corporation |
| 0 | ||
| 122496 | Amphenol RF |
| 0 | |||
| 507-4961-3733-500F | Dialight | RoHS : Compliant |
| 0 | ||
| 7249690-2 | SOURIAU-SUNBANK |
| 0 | |||
| MS27496E11B2SB-LC | Aero-Electric Connector Inc |
| 0 | |||
| MS27496E11B35PA-LC | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS27496E11F2SD | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS27496E13B4SD | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS27496E15B5SA | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS27496E17F99SD | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS27496E19B11SB | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS27496E19B11SD-LC | Aero-Electric Connector Inc |
| 0 | |||
| MS27496E19B30PD-LC | Aero-Electric Connector Inc |
| 0 | |||
| MS27496E21B11PD-LC | Aero-Electric Connector Inc |
| 0 | |||
| MS27496E23B53PD-LC | Aero-Electric Connector Inc |
| 0 | |||
 PUI | 12.88496 | 21,944 | ||||
| 12.97496 | 9,000 | |||||
| 12.94496 | 2,847 | |||||
| 2349-64G00DPN3T-P | 330 | |||||
| 9001-14961C00A | Oupiin | RoHS : Compliant | 286 | |||
 Chip 1 Exchange | 34961-0340 | Molex | INSTOCK RoHS : Compliant | 328,948 | ||
| 49623-1090 | Molex | INSTOCK | 67,275 | |||
| 34961-0381 | Molex | INSTOCK | 39,590 | |||
| 34960-0300 | Molex | INSTOCK RoHS : Compliant | 26,769 | |||
| A759KS475M2EBAE496 | YAGEO Corporation | INSTOCK | 11,700 | |||
| 7134-9605 | INSTOCK | 4,750 | ||||
| B82496A3399J | TDK Electronics | INSTOCK | 3,000 | |||
| 816496-SF | TE Connectivity | INSTOCK RoHS : Compliant | 1,950 | |||
| B82496C3479J | TDK Electronics | INSTOCK RoHS : Compliant | 1,505 | |||
| LM1496N | INSTOCK | 111 | ||||
| 024967-0000 | INSTOCK | 45 | ||||
| B82496C3121 | TDK Electronics | INSTOCK | 42 | |||
| 1D49602-1 | INSTOCK | 9 | ||||
| 1D49698-41 | INSTOCK | 3 | ||||
| 1D49698-63 | INSTOCK | 2 | ||||
 Avnet Abacus | B82496C3101J | TDK Corporation | (Alt: B82496C3101J000) RoHS : Compliant | 80,000 | ||
| B82496C3100J | TDK Corporation | Wirewound Inductor 10 nH 02 ohm 5 GHz 600 mA 0603 1608 Metric B82496C SIMID Series (Alt: B82496C3100J000) RoHS : Compliant | 20,000 | |||
| 144969-1 | TE Connectivity | Automotive Connector Contact MQS Socket Crimp 20 AWG 23 AWG (Alt: 144969-1) RoHS : Compliant | 11,000 | |||
| 349690140 | Molex | Conn Housing RCP 14 POS 254mm ST Cable Mount Carton (Alt: 349690140) RoHS : Compliant | 7,500 | |||
| 349690142 | Molex | Automotive Connector Housing Brown Stac64 34969 Series Receptacle 14 Ways (Alt: 349690142) RoHS : Compliant | 4,560 | |||
| 394968-E | TE Connectivity | IDC Connector Vertical IDC Receptacle Female 127 mm 1 Row 3 Contacts Cable Mount (Alt: 394968-E) RoHS : Compliant | 1,904 | |||
| 254960-E | TE Connectivity | Conn DIN 41612 Receptacle 160 POS 254mm Press Fit ST Through Hole (Alt: 254960-E) RoHS : Compliant | 1,008 | |||
| 49681SC | Murata Manufacturing Co Ltd | Power Inductor SMD 680 uH 20 620 mA Shielded 620 mA 122mm x 122mm x 8mm (Alt: 49681SC) RoHS : Compliant | 500 | |||
| 1149611 | Phoenix Contact | Modular Connector RJ45 Jack 1 x 1 Port 8P8C IP20 Through Hole Mount (Alt: 1149611) RoHS : Compliant | 360 | |||
| 1714968 | Phoenix Contact | WireToBoard Terminal Block 635 mm 3 Ways 24 AWG 10 AWG 6 mm Screw (Alt: 1714968) RoHS : Compliant | 150 | |||
| 1149616 | Phoenix Contact | Modular Connector RJ45 Jack 1 x 4 Ganged 8P8C IP20 Through Hole Mount (Alt: 1149616) RoHS : Compliant | 128 | |||
| M85049/69-11Z | Amphenol Corporation | (Alt: M85049/69-11Z) RoHS : Not Compliant | 50 | |||
| 349617341 | Molex | (Alt: 349617341) RoHS : Compliant | 0 | |||
| 349617341 | Molex | (Alt: 349617341) RoHS : Compliant | 0 | |||
| 349674005 | Molex | (Alt: 349674005) RoHS : Compliant | 0 | |||
Avnet Asia | B82496C3221J | TDK Corporation | (Alt: B82496C3221J) RoHS : Compliant | 10,000 | ||
| 1-2496898-1 | TE Connectivity | 800G OSFP DAC CABLE, 2250MM, COM-MP3 (Alt: 1-2496898-1) RoHS : Compliant | 0 | |||
| 2496899-5 | TE Connectivity | (Alt: 2496899-5) RoHS : Compliant | 0 | |||
| 2496965-1 | TE Connectivity | (Alt: 2496965-1) RoHS : Compliant | 0 | |||
| 0349618345 | Molex | (Alt: 0349618345) RoHS : Compliant | 0 | |||
| 816496-SF | TE Connectivity | EMC CHOKES 300 VDC, 4 A, PCB TERMINAL (Alt: 816496-SF) RoHS : Compliant |
| 0 | ||
MC1496BDR2G | onsemi | (Alt: MC1496BDR2G) RoHS : Compliant | 0 | |||
| 1449630002 | Molex | DRAWING 144963-0002 . (Alt: 1449630002) RoHS : Compliant | 0 | |||
| 2496777-8 | TE Connectivity | RJ45+QSFP 3.05M W/ LH MID CBL CHN 36X AS (Alt: 2496777-8) RoHS : Compliant | 0 | |||
| PDQ24496-CS4 | TE Connectivity | (Alt: PDQ24496-CS4) RoHS : Compliant | 0 | |||
| 2496671-3 | TE Connectivity | APEC IO CABLE (Alt: 2496671-3) RoHS : Compliant | 0 | |||
| 2496844-1 | TE Connectivity | (Alt: 2496844-1) RoHS : Compliant | 0 | |||
| 2496898-2 | TE Connectivity | 800G OSFP DAC CABLE, 1000MM, COM-MP3 (Alt: 2496898-2) RoHS : Compliant | 0 | |||
| 0496160711 | Molex | USB Connector, Plug, USB 2.0, Mini USB Type B, 5 Ways, Gold, THT, Right Angle, Copper Alloy (Alt: 0496160711) RoHS : Compliant | 0 | |||
| 2454960-3 | TE Connectivity | ICCON INSERT 3.4 PIN SCREW 43.5 LENGT (Alt: 2454960-3) RoHS : Compliant | 0 | |||
 Avnet Silica | RB496EATR | ROHM Semiconductor | (Alt: RB496EATR) RoHS : Compliant | 3,000 | ||
| STM32L496RET6 | STMicroelectronics | MCU 32Bit ARM CortexM4F RISC 512KB Flash 171V to 36V 64Pin LQFP Tray (Alt: STM32L496RET6) RoHS : Compliant | 2,720 | |||
| STM32L496VGT6 | STMicroelectronics | ARM MCU STM32 Family STM32L4 Series Microcontrollers ARM CortexM4 32 bit 80 MHz 1 MB (Alt: STM32L496VGT6) RoHS : Compliant | 2,160 | |||
| STM32L496QGI6P | STMicroelectronics | ARM MCU STM32 Family STM32L4 Series Microcontrollers ARM CortexM4 32 bit 80 MHz 1 MB (Alt: STM32L496QGI6P) RoHS : Compliant | 1,248 | |||
| STM32L496VET6TR | STMicroelectronics | (Alt: STM32L496VET6TR) RoHS : Compliant | 1,000 | |||
| STM32L496VET6 | STMicroelectronics | MCU 32Bit ARM CortexM4F RISC 512KB Flash 171V to 36V 100Pin LQFP Tray (Alt: STM32L496VET6) RoHS : Compliant | 540 | |||
| STM32L496ZET6 | STMicroelectronics | MCU 32Bit ARM CortexM4F RISC 512KB Flash 171V to 36V 144Pin LQFP Tray (Alt: STM32L496ZET6) RoHS : Compliant | 300 | |||
| STM32L496VGT6P | STMicroelectronics | 1632BITS MICROS (Alt: STM32L496VGT6P) RoHS : Compliant | 90 | |||
| 1N4965US | Microchip Technology Inc | (Alt: 1N4965US) RoHS : Not Compliant | 36 | |||
| NUCLEO-L496ZG-P | STMicroelectronics | Development Board STM32L496ZGTP MCU SMPS Arduino ST Zio and Morpho Connectivity (Alt: NUCLEO-L496ZG-P) RoHS : Compliant | 4 | |||
| CDLL4962 | Microchip Technology Inc | Diode Zener Single 15V 5 5W 2Pin EPack (Alt: CDLL4962) RoHS : Compliant | 0 | |||
| STM32L496RGT3 | STMicroelectronics | ARM MCU 32bit ARM CortexM4 80 MHz 1 MB 320 KB 64Pin LQFP (Alt: STM32L496RGT3) RoHS : Compliant | 0 | |||
| STM32L496QGI6 | STMicroelectronics | ARM MCU STM32 Family STM32L4 Series Microcontrollers ARM CortexM4 32 bit 80 MHz 1 MB (Alt: STM32L496QGI6) RoHS : Compliant | 0 | |||
| BD65496MUV-E2 | ROHM Semiconductor | (Alt: BD65496MUV-E2) RoHS : Compliant | 0 | |||
| MP5496GR-0002-Z | Monolithic Power Systems | Power Management 55 V 5 LDOs 9 Regulated Outputs 28 Pins QFN (Alt: MP5496GR-0002-Z) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AX7DAF1-429.4967T | Abracon Corporation | XTAL OSC XO 429.4967MHZ LVDS SMD RoHS : Compliant |
| 0 | |
 Component Electronics, Inc | CVCO55-602496 | Crystek Corporation | IN STOCK SHIP TODAY | 4,250 | ||
| 749619-2 | IN STOCK SHIP TODAY | 1,000 | ||||
T496D226M016AS | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 570 | ||
| 49688 | Leviton Manufacturing Co | IN STOCK SHIP TODAY |
| 400 | ||
| 43249-6101 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 300 | ||
| T496C156M016AS | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 150 | |||
| SN7496N | Texas Instruments | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 122 | ||
| ECXO-149-66.000MHZ | Ecliptek Corporation | IN STOCK SHIP TODAY |
| 72 | ||
| T496C226M010AS | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 70 | |||
| 3496-1002 | 3M | IN STOCK SHIP TODAY | 41 | |||
| 9396/7496PC | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY | 18 | |||
| 749608-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 10 | ||
| 749697-2 | TE Connectivity | IN STOCK SHIP TODAY | 10 | |||
| 749621-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 8 | ||
| 4967014000 | IN STOCK SHIP TODAY | 2 | ||||
 DB Roberts | SPL49622 | Spiralock | 7/16-14 SPL Hi Limit PD Gage Standard Gage |
| 1 | |
| 496496 | Essentra Components | 0 | ||||
| 496429 | Essentra Components | 0 | ||||
| 496474 | Essentra Components | 0 | ||||
| 496555 | Essentra Components | 0 | ||||
| 496681 | Essentra Components | 0 | ||||
| 4549-632-SS | RAF Electronic Hardware | 0 | ||||
| 496471 | Essentra Components | 0 | ||||
| 496552 | Essentra Components | 0 | ||||
| 496589 | Essentra Components | 0 | ||||
| 12SWS2496 | Essentra Components | SHOULDER WASHER, .130 ID, .343 | 0 | |||
| SPL49651 | Spiralock | 1/2-20 SPL GO HANDLE | 0 | |||
| SPL49688 | Spiralock | 5/8-11 SPL Gage Set | 0 | |||
| SPL49608 | Spiralock | 3/8-16 SPL Gage Set | 0 | |||
| SPL49653 | Spiralock | 1/2-20 SPL Hi Limit Ramp Gage Standard Gage | 0 | |||
 EBV Elektronik | TLE49644MXTSA1 | Infineon Technologies AG | Hall Effect Switch 10 mT 85 mT 3 V to 32 V 3 Pins SOT23 (Alt: SP001042414) RoHS : Compliant | 2,688,000 | ||
| TLE4966V1KHTSA1 | Infineon Technologies AG | Hall Effect Sensor 10mA Latch 5V9V12V15V18V24V 6Pin TSOP TR (Alt: SP000997990) RoHS : Compliant | 21,000 | |||
| TLE49663GHTSA1 | Infineon Technologies AG | Hall Effect Sensor 10mA Bipolar 27V to 18V 6Pin TSOP TR (Alt: SP002983192) RoHS : Compliant | 3,000 | |||
| STM32L496ZGT6 | STMicroelectronics | ARM MCU STM32 Family STM32L4 Series Microcontrollers ARM CortexM4 32 bit 80 MHz 1 MB (Alt: STM32L496ZGT6) RoHS : Compliant | 2,940 | |||
| STM32L496RGT3 | STMicroelectronics | ARM MCU 32bit ARM CortexM4 80 MHz 1 MB 320 KB 64Pin LQFP (Alt: STM32L496RGT3) RoHS : Compliant | 1,920 | |||
| STM32L496QGI6P | STMicroelectronics | ARM MCU STM32 Family STM32L4 Series Microcontrollers ARM CortexM4 32 bit 80 MHz 1 MB (Alt: STM32L496QGI6P) RoHS : Compliant | 1,664 | |||
| STM32L496AGI6 | STMicroelectronics | ARM MCU STM32 Family STM32L4 Series Microcontrollers ARM CortexM4 32 bit 80 MHz 1 MB (Alt: STM32L496AGI6) RoHS : Compliant | 832 | |||
| STM32L496QGI6 | STMicroelectronics | ARM MCU STM32 Family STM32L4 Series Microcontrollers ARM CortexM4 32 bit 80 MHz 1 MB (Alt: STM32L496QGI6) RoHS : Compliant | 416 | |||
| MC1496BDR2G | onsemi | Balanced Modulator and Demodulator ONSSPCAPLFRS (Alt: MC1496BDR2G) RoHS : Compliant | 0 | |||
| STM32L496ZGT3 | STMicroelectronics | STMSTM32L496ZGT3 (Alt: STM32L496ZGT3) RoHS : Compliant | 0 | |||
| TLE49646MXTSA1 | Infineon Technologies AG | Hall Effect Switch High Precision AECQ100 Unipolar Hall Effect Switch 00035 T 00025 T 3 V (Alt: SP001042418) RoHS : Compliant | 0 | |||
| SQ4961EY-T1-GE3 | Vishay Intertechnologies | (Alt: SQ4961EY-T1-GE3) RoHS : Compliant | 0 | |||
| SQ4961EY-T1_GE3 | Vishay Intertechnologies | (Alt: SQ4961EY-T1_GE3) RoHS : Compliant | 0 | |||
| TLV49613TAXBXA1 | Infineon Technologies AG | Hall Effect Sensor 25mA Latch 3V to 26V 3Pin TO92S Bulk (Alt: SP001274776) RoHS : Compliant | 0 | |||
| JANS1N4962US/TR | Microchip Technology Inc | (Alt: JANS1N4962US/TR) RoHS : Compliant | 0 | |||
 ECCO | 2170496011 | ITT Interconnect Solutions | 1,286 | |||
| MS27496E13B98P | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 83 | ||
| 93-149614-12S | Amphenol Industrial Operations |
| 5 | |||
 Flip Electronics | NTD4969NT4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 34,690 | |
| NTD4965NT4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 9,960 | ||
| FPF2496UCX | onsemi | Stock, Ship Today RoHS : Compliant | 2,335 | |||
 Master Electronics | 354969-1 | TE Connectivity | Extension Spring RoHS : Compliant |
| 33 | |
| 280-566/281-496 | WAGO Innovative Connections | 3-conductor sensor supply terminal block - LED (green) - for NPN-(low-side) switching sensors - Power supply from sensor side - with colored conductor entries - 2.5 mm² - CAGE CLAMP® - 2 50 mm² - gray RoHS : Compliant |
| 13 | ||
| ZW-08-14-L-D-496-496 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| R85049/60-1N8 | TE Connectivity | R85049/60-1N8 MOQ Reduction RoHS : Compliant |
| 0 | ||
| R85049/60-2G36W | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| MTMM-105-14-G-D-496 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 096511-0496 | ITT Interconnect Solutions | MDB1-9SH002P RoHS : Compliant |
| 0 | ||
| 1-1614965-5 | TE Connectivity | CPF 1206 24K 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 1-1879496-7 | TE Connectivity | CRGH0805 5% 56K 0.33W RoHS : Compliant |
| 0 | ||
| 3-994962-2 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 219-3-1-65-4-9-60 | Sensata Circuit Breakers | Hydraulic Magnetic Circuit Breaker 3 Pole 209 Series | Sensata - Airpax 219-3-1-65-4-9-60 RoHS : Compliant |
| 0 | ||
| 34960-0300 | Molex | Mini50 Right Angle Header - 3 Bay - 102 Circuits - Bay A 34 Circuit - Bay A 34 Circuit - Bay C 34 Circuit. RoHS : Compliant |
| 0 | ||
| 34961-0381 | Molex | Mini50 Unsealed Right-Angle Header - 38 Circuits - 3 Rows - Polarization Option B - Gray - Tray. RoHS : Compliant |
| 0 | ||
| 22759/32-24-96 | TE Connectivity | 22759/32-24-96 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2473249-6 | TE Connectivity | 1.25 WTB HDR DIP 6 POS MOQ Reduction RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3FCA496-1M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: FC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex FC UPC, NK to SC UPC, SM OS2, 2.0mm PVC, Yellow-1M. Pasternack’s PE3FCA496-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long simplex cable assembly is equipped with FC/UPC narrow key to SC/UPC connectors. Our fiber optic cable has a yellow PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA496-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA496-1M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of simplex FC/UPC to SC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 167 | |
| PE3C4964-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 36 inches. Snap-On BMA Jack to BNC Male Cable 36 Inch Length Using RG400 Coax., Radio frequency assembly snap-on BMA jack to BNC male cable 36 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to BNC male cable 36 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and BNC cable connection on the other. Our BMA to BNC cable assemblies have a jack gender on end 1 and male on end 2. This BMA to BNC cable is a jack to male coax assembly, PE3C4964-36, can also be known as a BMA female to BNC plug cable assembly and will be shipped same-day as it is purchased. BMA female to BNC plug cable assembly PE3C4964-36 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BMA jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4964-36 can also be used in the other direction and will be BNC male to BMA jack cable assembly if the opposite connectivity is required. BMA female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to BNC male cable 36 inch length using RG400 coax. |
| 97 | ||
| PE39496-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. TNC Male to TNC Female Semi-Flexible Precision Cable 12 Inch Length Using PE-SR402FLJ Coax, LF Solder, RoHS., Radio frequency assembly TNC male to TNC female semi-flexible precision cable 12 inch length using PE-SR402FLJ coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC female semi-flexible precision cable 12 inch length using PE-SR402FLJ coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our precision TNC to TNC cable assemblies have a male gender on end 1 and female on end 2. This TNC to TNC cable is a male to female coax assembly, PE39496-12, can also be known as a precision TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE39496-12 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39496-12 can also be used in the other direction and will be TNC female to TNC male cable assembly if the opposite connectivity is required. Precision TNC plug to TNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC female semi-flexible precision cable 12 inch length using PE-SR402FLJ coax, LF solder, RoHS. |
| 87 | ||
| PE3C8496-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-375, RF Cable Type: SPF-375, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. Fire Rated 7/16 DIN Male to N Male Low PIM Cable 50 CM Length Using SPF-375 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 7/16 DIN male to N male low PIM cable 50 cm length using SPF-375 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 7/16 DIN male to N male low PIM cable 50 cm length using SPF-375 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and N type cable connection on the other. Our low PIM 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to type N cable is a male to male coax assembly, PE3C8496-50CM, can also be known as a low PIM 7/16 DIN plug to N type plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3C8496-50CM is built with SPF-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 7/16 DIN male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8496-50CM can also be used in the other direction and will be type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to N type cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 7/16 DIN male to N male low PIM cable 50 cm length using SPF-375 coax using Times Microwave parts. |
| 73 | ||
| PE3C4961-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Plug Bulkhead to TNC Male Cable 12 Inch Length Using RG400 Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable 12 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable 12 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4961-12, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4961-12 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4961-12 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable 12 inch length using RG400 coax. |
| 18 | ||
| PE3C10449-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Female Bulkhead to 1.85mm Female Cable 6 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 1.85mm female cable 6 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 1.85mm female cable 6 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a 1.85mm cable connection on the other. Our 2.92mm to 1.85mm cable assembly has a female gender on end 1 and a female on end 2. PE3C10449-6 can also be known as a 2.92mm jack to 1.85mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. 2.92mm jack to 1.85mm jack cable assembly PE3C10449-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method, while the other has the clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10449-6 can also be used in the other direction and will be a 1.85mm female to 2.92mm female bulkhead cable assembly if the opposite connectivity is required. 2.92mm jack bulkhead to 1.85mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 1.85mm RF cable assembly as per your requirements. |
| 11 | ||
| PE3C4724-96 | Pasternack Enterprises | Key Specifications, Connector 1 Series: LC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: LC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Phosphor Bronze, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG218/U, RF Cable Type: RG218, RF Cable Impedance: 50 Ohm, Length, Max: 96 inches. LC Male to LC Female Cable 96 Inch Length Using RG218 Coax., Radio frequency assembly LC male to LC female cable 96 inch length using RG218 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The LC male to LC female cable 96 inch length using RG218 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom LC to LC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a LC cable connection on one end and a LC cable connection on the other. Our LC to LC cable assembly has a male gender on end 1 and a female on end 2. PE3C4724-96 can also be known as a LC plug to LC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. Our PE3C4724-96 RF cable has a PVC jacket of 0.870-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has an in-series connection. LC plug to LC jack cable assembly PE3C4724-96 is built with RG218 which is a flexible coax type. The Pasternack flexible LC cable assembly is manufactured with LC to LC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C4724-96 can also be used in the other direction and will be a LC female to LC male cable assembly if the opposite connectivity is required. LC plug to LC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality LC to LC cable assembly for quick shipment worldwide. Variations of LC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal LC to LC RF cable assembly as per your requirements. |
| 1 | ||
| PE3649-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 60 inches. BNC Male to BNC Female Bulkhead Cable 60 Inch Length Using RG58 Coax., Radio frequency assembly BNC male to BNC female bulkhead cable 60 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC female bulkhead cable 60 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE3649-60, can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE3649-60 is built with RG58 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3649-60 can also be used in the other direction and will be BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC female bulkhead cable 60 inch length using RG58 coax. |
| 0 | ||
| PE3C4949-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Plug Bulkhead to BNC Male Cable 60 Inch Length Using RG316 Coax., Radio frequency assembly slide-on BMA plug bulkhead to BNC male cable 60 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to BNC male cable 60 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BNC cable connection on the other. Our BMA to BNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to BNC cable is a plug to male coax assembly, PE3C4949-60, can also be known as a BMA male to BNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to BNC plug cable assembly PE3C4949-60 is built with RG316 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency BMA plug bulkhead to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4949-60 can also be used in the other direction and will be BNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to BNC male cable 60 inch length using RG316 coax. |
| 0 | ||
| PE3C4969/HS-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMP Female Right Angle to SMP Female Right Angle Cable 6 Inch Length Using PE-P047 Coax with HeatShrink., Radio frequency assembly SMP female right angle to SMP female right angle cable 6 inch length using PE-P047 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to SMP female right angle cable 6 inch length using PE-P047 coax with heatshrink, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. PE3C4969/HS-6 can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C4969/HS-6 is built with PE-P047 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMP female right angle cable 6 inch length using PE-P047 coax with heatshrink. |
| 0 | ||
| PE3W13496 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. MCX Plug to MMCX Jack Cable Using PE-SR405FL Coax. PE3W13496 is a MCX plug to MMCX jack cable using PE-SR405FL coax. This Pasternack MCX plug to MMCX jack cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm MMCX for connector 2. Our plug MCX to jack MMCX cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W13496 MCX plug to MMCX jack cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE34966-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to Reverse Polarity TNC Male Cable 36 Inch Length Using PE-C400 Coax., Radio frequency assembly N male to reverse polarity TNC male cable 36 inch length using PE-C400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to reverse polarity TNC male cable 36 inch length using PE-C400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and reverse polarity TNC cable connection on the other. Our low loss N type to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to reverse polarity TNC cable is a male to male coax assembly, PE34966-36, can also be known as a low loss N type plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to reverse polarity TNC plug cable assembly PE34966-36 is built with PE-C400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34966-36 can also be used in the other direction and will be reverse polarity TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to reverse polarity TNC male cable 36 inch length using PE-C400 coax. |
| 0 | ||
| PE37849-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NMO Mount, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 60 inches. TNC Female to NMO Mount Connector Cable 60 Inch Length Using RG58 Coax., Radio frequency assembly TNC female to NMO mount connector cable 60 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC female to NMO mount connector cable 60 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to NMO mount cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and NMO mount cable connection on the other. Our TNC to NMO mount cable assemblies have a female gender on end 1 and sexless on end 2. This TNC to NMO mount cable is a female to sexless coax assembly, PE37849-60, can also be known as a TNC jack to NMO mount sexless cable assembly and will be shipped same-day as it is purchased. TNC jack to NMO mount sexless cable assembly PE37849-60 is built with RG58 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to NMO mount cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this TNC female to NMO mount sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37849-60 can also be used in the other direction and will be NMO mount sexless to TNC female cable assembly if the opposite connectivity is required. TNC jack to NMO mount sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to NMO mount cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female to NMO mount connector cable 60 inch length using RG58 coax. |
| 0 | ||
| PE3C9749-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Mini SMP Male to 2.4mm Female VITA 67 Cable 6 Inch Length Using PE-P086HF Coax with HeatShrink., Radio frequency assembly mini SMP male to 2.4mm female VITA 67 cable 6 inch length using PE-P086HF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP male to 2.4mm female VITA 67 cable 6 inch length using PE-P086HF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax vita 67 cable assembly is built with mini SMP cable connection on one end and 2.4mm cable connection on the other. Our vita 67 mini SMP to 2.4mm cable assemblies have a male gender on end 1 and female on end 2. PE3C9749-6 can also be known as a vita 67 mini SMP plug to 2.4mm jack cable assembly and will be shipped same-day as it is purchased. Mini SMP plug to 2.4mm jack cable assembly PE3C9749-6 is built with which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with mini SMP to 2.4mm cable connectors, has a 50 Ohm impedance. RF specs on this 40 GHz maximum frequency mini SMP male to 2.4mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9749-6 can also be used in the other direction and will be 2.4mm female to mini SMP male cable assembly if the opposite connectivity is required. Vita 67 mini SMP plug to 2.4mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.4mm cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP male to 2.4mm female VITA 67 cable 6 inch length using PE-P086HF coax with heatshrink. |
| 0 | ||
| PE3W05496 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SSMC Plug to Push-On SMP Female Right Angle Cable Using LMR-100 Coax. PE3W05496 is a SSMC plug to SMP female right angle cable using LMR-100A coax. This Pasternack SSMC plug to SMP female right angle cable assembly uses a 50 Ohm SSMC for connector 1 and a 50 Ohm SMP for connector 2. SSMC to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SSMC to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05496 SSMC plug to SMP female right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
 Vyrian | M85049/62-14Z | Amphenol Corporation | Connector Accessory, Boot Adapter, Aluminum Alloy RoHS : Compliant | 18,360 | ||
| PMP4963 | Texas Instruments | 9,592 | ||||
| 2304966 | Phoenix Contact | Cable Assembly, 50 Conductor(s), 26AWG, 60V, Flexible Cord And Fixture Wire RoHS : Compliant | 8,952 | |||
| JANS1N4965US | Microchip Technology Inc | Zener Diode, 20V V(Z), 5%, 5W, Silicon, Unidirectional RoHS : Not Compliant | 8,881 | |||
| STM32L496ZGT3 | STMicroelectronics | RISC Microcontroller, 32-Bit, 80MHz RoHS : Compliant | 7,702 | |||
| LM4960SQ | National Semiconductor Corporation | Audio Amplifier, 1 Channel(s), 1 Func, PQCC28 RoHS : Not Compliant | 7,263 | |||
| MAX496CPE+ | Maxim Integrated Products | Buffer Amplifier, 4 Func, CMOS, PDIP16 RoHS : Compliant | 7,109 | |||
| SN7496N | Texas Instruments | Parallel In Parallel Out, TTL/H/L Series, 5-Bit, Right Direction, True Output, TTL, PDIP16 RoHS : Not Compliant | 6,958 | |||
TM496TBM40S-70 | Texas Instruments | Fast Page DRAM Module, 4MX40, 70ns, CMOS | 6,760 | |||
| TLV49613TAXBXA1 | Infineon Technologies AG | Hall Effect Sensor, -10.4mT Min, 10.4mT Max, 0-25mA, Rectangular, Through Hole Mount RoHS : Compliant | 6,339 | |||
| MAX4968ECM | Analog Devices (Maxim Integrated) | 5,938 | ||||
LME49600TS | Texas Instruments | Audio Amplifier, 2 Channel(s), 1 Func, PSSO5 | 5,100 | |||
| 5962-01-414-9654 | AMD Xilinx | Field Programmable Gate Array, 50MHz, 144-Cell, CMOS, CQFP100 RoHS : Not Compliant | 3,567 | |||
| CT134962 | Micron Technology, Inc | 2,606 | ||||
MAX1496EAI-T | Maxim Integrated Products | ADC, Proprietary Method, 1 Func, 1 Channel, BICMOS, PDSO28 RoHS : Not Compliant | 195 | |||
 Waytek, Inc. | 49635 | Dynatex International | Dielectric Grease 5 OZ Tube Dynatex 49635 * APPLICATOR CAP FIXED |
| 0 | |
 Win Source Electronics | MC1496BDG | onsemi | Balanced Mod/Dmod 300MHz Automotive 14-Pin SOIC N Tube / IC MODULATOR/DEMODULATOR 14-SOIC RoHS : Compliant |
| 57,220 | |
| MC1496BDR2G | onsemi | Balanced Modulators/Demodulators RoHS : Compliant |
| 55,360 | ||
| TLE4961-1M | Infineon Technologies AG | High Precision Automotive Hall Effect Latch RoHS : Compliant |
| 39,000 | ||
| TLE49611MXTSA1 | Infineon Technologies AG | MAGNETIC SWITCH LATCH SOT23-3 / Digital Switch Latch Open Drain Hall Effect PG-SOT23-3-15 RoHS : Compliant |
| 36,940 | ||
| MP5496GR-0002-Z | Monolithic Power Systems | Power Management IC Buck Converter 4.5A/2.5A/4A/2A 2.8V to 5.5V with I2C Bus and OTP Surface Mount RoHS : Compliant |
| 30,000 | ||
MAX6496ATA+T | Maxim Integrated Products | 72V, Overvoltage-Protection Switches/Limiter Controllers with an External MOSFET RoHS : Compliant |
| 27,960 | ||
| TLE49646MXTSA1 | Infineon Technologies AG | MAG SWITCH UNIPOLAR SOT23-3 RoHS : Compliant |
| 25,940 | ||
| TS4962IQT | STMicroelectronics | IC AMP AUDIO PWR 2.8W MONO 8DFN RoHS : Compliant |
| 21,000 | ||
| AM4962GHTR-G1 | Diodes Incorporated | SINGLE PHASE FULL WAVE DIRECT PWM MOTOR DRIVER | IC MOTOR DRVR 3.5V-16V 14HTSSOP RoHS : Compliant |
| 20,000 | ||
| TDA7496 | STMicroelectronics | IC AMP PWR AB 5+5W MULTIWATT15 RoHS : Compliant |
| 13,450 | ||
| SI4965DY | Vishay Huntington | Dual P-Channel 1.8-V (G-S) MOSFET |
| 12,099 | ||
| STM32L496RET6TR | STMicroelectronics | IC MCU 32BIT 512KB FLASH 64LQFP / ARM® Cortex®-M4 STM32L4 Microcontroller IC 32-Bit Single-Core 80MHz 512KB (512K x 8) FLASH 64-LQFP (10x10) RoHS : Compliant |
| 11,160 | ||
| B82496C3220J | TDK Electronics | FIXED IND 22NH 380MA 500 MOHM RoHS : Compliant |
| 8,000 | ||
| STM32L496ZGT3 | STMicroelectronics | IC MCU 32BIT 1MB FLASH 144LQFP / ARM® Cortex®-M4 series Microcontroller IC 32-Bit Single-Core 80MHz 1MB (1M x 8) FLASH 144-LQFP (20x20) RoHS : Compliant |
| 988 | ||
| ADA4960-1ACPZ-R7 | Analog Devices Inc | IC ADC DRIVER 16LFCSP / ADC Driver IC Data Acquisition 16-LFCSP-WQ (3x3) RoHS : Compliant |
| 10 | ||
 Wuhan P&S | 10148496-112LF | Amphenol FCi | Backplane connector |
| 180,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand