| Electronic Components Datasheet Search |
|
4964 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Verical | 4964-0-00-01-00-00-33-0 | Mill-Max Mfg Corp | 4964-0-00-01-00-00-33-0 |
| 55,900 | |
| 4964-0-00-21-00-00-33-0 | Mill-Max Mfg Corp | Contact PIN Solder ST Thru-Hole RoHS : Compliant |
| 10,017 | ||
| 4964-0-00-01-00-00-33-0 | Mill-Max Mfg Corp | 4964-0-00-01-00-00-33-0 |
| 2,000 | ||
| 4964025061 | Amphenol FCi | VHDM reg Backplane connectors Vertical Orientation Press Fit Termination 6 Row VHDM 25 positions open H Series 4.75mm (0.187in) Header RoHS : Must Be Verified |
| 725 | ||
| 4964-SS-120 | Pomona Electronics | Cable Assembly Coaxial 3.048m 22AWG BNC to BNC M-M RoHS : Compliant |
| 8 | ||
| 4964-SS-36 | Pomona Electronics | Cable Assembly Coaxial 0.914m 22AWG BNC to BNC M-M RoHS : Compliant |
| 5 | ||
| 4964-SS-24 | Pomona Electronics | Cable Assembly Coaxial 0.609m 22AWG BNC to BNC M-M RoHS : Compliant |
| 4 | ||
| 4964-SS-72 | Pomona Electronics | Cable Assembly Coaxial 1.828m 22AWG BNC to BNC M-M RoHS : Must Be Verified |
| 1 | ||
| 49643-GRY-S2 | Belden Inc | 49643-GRY-S2 |
| 1 | ||
![]() Avnet Americas | TLE49646MXTSA1 | Infineon Technologies AG | Hall Effect Switch, High Precision, AEC-Q100, Unipolar Hall Effect Switch, 0.0035 T, 0.0025 T, 3 V - Tape and Reel (Alt: TLE49646MXTSA1) RoHS : Compliant |
| 45,000 | |
| TLE49642MXTSA1 | Infineon Technologies AG | - Tape and Reel (Alt: TLE49642MXTSA1) RoHS : Compliant |
| 6,000 | ||
| TLE49644MXTSA1 | Infineon Technologies AG | Hall Effect Switch, 10 mT, 8.5 mT, 3 V to 32 V, 3 Pins, SOT-23 - Product that comes on tape, but is not reeled (Alt: 18AC0645) RoHS : Compliant |
| 0 | ||
| 1149-6419 | Amphenol Corporation | - Trays (Alt: 1149-6419) RoHS : Compliant |
| 0 | ||
| Y149647R0000B9R | VPG Foil Resistors | High-Precision Resistor Metal Foil 47Ohm 0.1% T/R - Tape and Reel (Alt: Y149647R0000B9R) RoHS : Compliant |
| 0 | ||
| JANS1N4964CUS | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf - Bulk (Alt: JANS1N4964CUS) RoHS : Not Compliant |
| 0 | ||
| M85049/6-41N | Amphenol Corporation | - Bulk (Alt: A85049641N) RoHS : Not Compliant |
| 0 | ||
| M85049/6-41N | Glenair Inc | - Bulk (Alt: M85049/6-41N) RoHS : Not Compliant |
| 0 | ||
| Y14964K17000Q0W | VPG Foil Resistors | High-Precision Resistor Metal Foil 4.17kOhm 0.02% Waffle Pack - Waffle Pack (Alt: Y14964K17000Q0W) RoHS : Not Compliant |
| 0 | ||
| TLE49644MXTSA1 | Infineon Technologies AG | Hall Effect Switch, 10 mT, 8.5 mT, 3 V to 32 V, 3 Pins, SOT-23 - Tape and Reel (Alt: TLE49644MXTSA1) RoHS : Compliant |
| 0 | ||
| TLV49644TAXBXA1 | Infineon Technologies AG | - Bulk (Alt: TLV49644TAXBXA1) RoHS : Compliant |
| 0 | ||
| Y14964K99000Q0W | VPG Foil Resistors | High-Precision Resistor Metal Foil 4.99kOhm 0.02% Waffle Pack - Waffle Pack (Alt: Y14964K99000Q0W) RoHS : Not Compliant |
| 0 | ||
| L4964HT | STMicroelectronics | - Rail/Tube (Alt: L4964HT) RoHS : Compliant | 0 | |||
| JAN1N4964US/TR | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf - Tape and Reel (Alt: JAN1N4964US/TR) RoHS : Not Compliant |
| 0 | ||
| JANTX1N4964DUS/TR | Microchip Technology Inc | Diode Zener Single 18V 1% 5W 2-Pin D-5B - Tape and Reel (Alt: JANTX1N4964DUS/TR) RoHS : Not Compliant |
| 0 | ||
![]() Mouser Electronics | 3-124-964 | Schurter Electronic Components | Surface Mount Fuses USL 0603 35 mA SMD super fast 0TP RoHS : Compliant |
| 8,830 | |
| 4964-SS-36 | Pomona Electronics | RF Cable Assemblies 36IN BNC MALE CABLE RoHS : Compliant |
| 67 | ||
| 4964-SS-24 | Pomona Electronics | RF Cable Assemblies 24IN BNC MALE CABLE RoHS : Compliant |
| 52 | ||
| 4964-SS-60 | Pomona Electronics | RF Cable Assemblies BNC ON LOW NOISE RoHS : Compliant |
| 25 | ||
| 4964 | Adafruit Industries | Adafruit Accessories Adafruit Rotary Trinkey - USB NeoPixel Rotary Encoder RoHS : Compliant |
| 9 | ||
| 4964-SS-120 | Pomona Electronics | RF Cable Assemblies BNC ON LOW NOISE RoHS : Compliant |
| 7 | ||
| 4964-SS-48 | Pomona Electronics | RF Cable Assemblies BNC ON LOW NOISE RoHS : Compliant |
| 6 | ||
| 4964-SS-240 | Pomona Electronics | RF Cable Assemblies BNC ON LOW NOISE RoHS : Compliant |
| 4 | ||
| 4964-SS-12 | Pomona Electronics | RF Cable Assemblies BNC ON LOW NOISE RoHS : Compliant |
| 1 | ||
| MMSDT-06-20-L-12.00-D-K-MDX | Samtec Inc | Rectangular Cable Assemblies .100" Mini Mate Double Row Discrete Wire Cable Assembly |
| 0 | ||
| 4964-SS-72 | Pomona Electronics | RF Cable Assemblies BNC ON LOW NOISE RoHS : Compliant |
| 0 | ||
| 4964-SS-26 | Pomona Electronics | RF Cable Assemblies BNC (M), Low Noise MTO RoHS : Compliant |
| 0 | ||
| 49645 C62S2 | Belden Inc | Ribbon Cables / IDC Cables GPIB UNSHD CONNECTOR RI38601 RoHS : Compliant |
| 0 | ||
| 496467-000 | TE Connectivity | Multi-Conductor Cables 55PC1221-18-2/6-4CS2502 |
| 0 | ||
| 4-964300-1 | TE Connectivity | Automotive Connectors TAB A 2.8x0.8 CONTACT SWS RoHS : Compliant |
| 0 | ||
![]() Newark | TLE49643KXTSA1 | Infineon Technologies AG | Hall Effect Sw, Unipolar, Sc-59-3; |Infineon Technologies TLE49643KXTSA1 RoHS : Compliant |
| 26,200 | |
| TLE49643KXTSA1 | Infineon Technologies AG | Hall Effect Sw, Unipolar, Sc-59-3; |Infineon Technologies TLE49643KXTSA1 RoHS : Compliant |
| 26,200 | ||
| TLE49645MXTMA1 | Infineon Technologies AG | Hall Effect Sw, Unipolar, 7.5G, Sot-23-3; |Infineon Technologies TLE49645MXTMA1 RoHS : Compliant |
| 5,260 | ||
| TLE49645MXTMA1 | Infineon Technologies AG | Hall Effect Sw, Unipolar, 7.5G, Sot-23-3; |Infineon Technologies TLE49645MXTMA1 RoHS : Compliant |
| 5,260 | ||
| TLE49645MXTSA1 | Infineon Technologies AG | Hall Switch, Unipolar, 0.0075T, Sot-23-3; |Infineon Technologies TLE49645MXTSA1 RoHS : Compliant |
| 3,722 | ||
| TLE49645MXTSA1 | Infineon Technologies AG | Hall Switch, Unipolar, 0.0075T, Sot-23-3; |Infineon Technologies TLE49645MXTSA1 RoHS : Compliant |
| 3,722 | ||
| ZB2BY4964 | Schneider Electric | Legend Plate, 30Mm X 40Mm, Pendant Cntrl; |Schneider Electric ZB2BY4964 RoHS : Compliant |
| 995 | ||
| TLE49644MXTSA1 | Infineon Technologies AG | Hall Effect Sw, Unipolar, 0.01T/Sot-23-3; |Infineon Technologies TLE49644MXTSA1 RoHS : Compliant |
| 597 | ||
| TLE49644MXTSA1 | Infineon Technologies AG | Hall Effect Sw, Unipolar, 0.01T/Sot-23-3; |Infineon Technologies TLE49644MXTSA1 RoHS : Compliant |
| 597 | ||
| TLE49641MXTSA1 | Infineon Technologies AG | Hall Effect Sw, Unipolar, Sot-23-3; |Infineon Technologies TLE49641MXTSA1 RoHS : Compliant |
| 248 | ||
| TLE49641MXTSA1 | Infineon Technologies AG | Hall Effect Sw, Unipolar, Sot-23-3; |Infineon Technologies TLE49641MXTSA1 RoHS : Compliant |
| 248 | ||
| HG4964-16DP-90 | L-com Inc | Antenna, Mimo Wimax, 4.9Ghz-6.4Ghz; |L-Com HG4964-16DP-90 RoHS : Compliant |
| 15 | ||
| 1149-6419 | Amphenol SV Microwave | Rf Adaptr/Bmb Rp Plug-2.92Mm Plug/50 Ohm; Convert From Coax Type:Bmb Rp; Convert From Gender:Plug; Convert To Coax Type:2.92Mm Coaxial; Convert To Gender:Plug; Adapter Body Style:Straight Adaptor; Impedance:50Ohm; Product Range:- Rohs Compliant: Yes RoHS : Compliant |
| 5 | ||
| 4964 | Lumberg Automation | Stl 328/100 M Pur/ Black; |Lumberg Automation 4964 RoHS : Not Compliant |
| 0 | ||
| 4964 | Adafruit Industries | Adafruit Rotary Trinkey - Usb Neopixel Rotary Encoder |Adafruit 4964 RoHS : Not Compliant |
| 0 | ||
![]() RS | 704.964.5 | EAO AG | ACCESSORY, TERMINAL COVER, RECTANGLE,29 X 42 X 3.5MM, PLASTIC, CLEAR RoHS : Compliant |
| 301 | |
| 7100349643 (AB8020-WO) | 3M | EMI ABSORBER AB8020-WO, 210 MM X 297 MM, WITHOUT ADHESIVE |
| 50 | ||
| 4964-SS-24 (1915865) | Pomona Electronics | CABLE ASSY 24 IN. 22 AWG BNC BOOTED BLACK JACKET UL LISTED |
| 16 | ||
| 64149 (64149 CX/500) | HELUKABEL | HOOK-UP WIRE, BARE COPPER, FINELY STRANDED, POLYVINYL CHLORIDE INSULATED, VDE AN |
| 8 | ||
| 2394964 | RS Pro | CABLE MOUNT SOLAR PV CONNECTOR, CRIMP, MALE, 1 KV, 2.5 MM2 |
| 5 | ||
| 4964-SS-72 (1915975) | Pomona Electronics | CABLE ASSY 72 IN. 22 AWG BNC BOOTED BLACK JACKET UL LISTED |
| 4 | ||
| 496401 | RS Pro | ADHESIVE PRE-PRINTED BLACK LABEL. QUANTITY: 120 |
| 3 | ||
| 4964-SS-12 (1915807) | Pomona Electronics | CABLE BNC MALE LOW NOISE 12" |
| 3 | ||
| 2084964 | RS Pro | H16B SURFACE MOUNT, HEAVY DUTY POWER CONNECTOR HOUSING, 1 LOCKING LEVER, M25 |
| 2 | ||
| 1964964 | RS Pro | NITRILE RUBBER O-RING SEAL, 8.5MM BORE, 13.5MM OUTER DIAMETER |
| 2 | ||
| 4964-SS-120 (1915818) | Pomona Electronics | CABLE BNC MALE LOW NOISE 120" |
| 2 | ||
| 2834964 | RS Pro | DUAL M12 ST. 4P FEMALE-ST. 4P MALE 4W 0 |
| 1 | ||
| 7974964 | RS Pro | GAS, LIQUID PRESSURE SENSOR ANALOG VOLTAGE RELATIVE 232PSI G1/4 DIN43650 C |
| 1 | ||
| EM4964-SS-96# (3320931) | Pomona Electronics | BNC (M), LOW NOISE, MTO BULK |
| 1 | ||
| 4964 | Adafruit Industries | ADAFRUIT ROTARY TRINKEY - USB NEOPIXEL ROTARY ENCODER |
| 0 | ||
![]() Microchip Technology Inc | JANTX1N4964C | Microchip Technology Inc | Voltage Regulator _ B-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 897 | |
| 1N4964US | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 594 | ||
| JANTX1N4964US | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 402 | ||
| JANS1N4964 | Microchip Technology Inc | Voltage Regulator _ B-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 301 | ||
| JAN1N4964 | Microchip Technology Inc | Voltage Regulator _ B-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 250 | ||
| JANTXV1N4964 | Microchip Technology Inc | Voltage Regulator _ B-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 127 | ||
| JANS1N4964US | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 87 | ||
| 1N4964CUS | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 57 | ||
| JAN1N4964D | Microchip Technology Inc | Voltage Regulator _ B-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 1N4964CUS/TR | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2050-11-29 RoHS : Compliant |
| 0 | ||
| 090-04964-000 | Microchip Technology Inc | DE-9(M) to BNC(F),6' RG174 DC IRIG TTL Input for VIALITE Fiber Serial Data MDL, Projected EOL: 2051-10-22 - Contact for Pricing | 0 | |||
| JANS1N4964CUS | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JAN1N4964US/TR | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2050-11-29 RoHS : Compliant |
| 0 | ||
| JANS1N4964CUS/TR | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2050-11-29 RoHS : Compliant |
| 0 | ||
| JANTX1N4964DUS/TR | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2050-11-29 RoHS : Compliant |
| 0 | ||
![]() Onlinecomponents.com | 00-4964 | Woodhead Molex | Cable Accessories Grommet MAX-LOC® RoHS : Compliant |
| 100 | |
| 4964-SS-36 | Pomona Electronics | Cable Assembly Coaxial 0.914m 22AWG BNC to BNC M-M RoHS : Compliant |
| 9 | ||
| 4964-SS-120 | Pomona Electronics | Cable Assembly PVC 3.048m 22AWG BNC to BNC M-M RoHS : Compliant |
| 8 | ||
| 4964-SS-24 | Pomona Electronics | Cable Assembly PVC 0.609m 22AWG BNC to BNC M-M |
| 4 | ||
| 4964-SS-60 | Pomona Electronics | Cable Assembly PVC 1.524m 22AWG BNC to BNC M-M RoHS : Compliant |
| 1 | ||
| 4964-SS-72 | Pomona Electronics | Cable Assembly Data 22AWG Circular to Circular M-M RoHS : Compliant |
| 1 | ||
| 4964 | Lumberg Automation | STL 328/100 M PUR RoHS : Compliant |
| 0 | ||
| C115371-4964 | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| 121575-4964 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 20A48 - Sockets - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Compliant |
| 0 | ||
| 70-4964 | Philmore | DUAL ROW HEADER-64 RoHS : Compliant |
| 0 | ||
| 4964-SS-12 | Pomona Electronics | BNC (M), LOW NOISE RoHS : Compliant |
| 0 | ||
| 4964-SS-240 | Pomona Electronics | BNC (M), LOW NOISE RoHS : Compliant |
| 0 | ||
| 4964-SS-48 | Pomona Electronics | Cable Assembly PVC 1.219m 22AWG BNC to BNC M-M RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | TLE49644MXTSA1 | Infineon Technologies AG | Solid State Magnetic Sensor Unipolar Switch Hall Effect SOT-23-3 T/R RoHS : Compliant |
| 7,635 | |
| TLE49643KXTSA1 | Infineon Technologies AG | Solid State Magnetic Sensor Unipolar Switch Hall Effect SOT-23-3 T/R RoHS : Compliant |
| 2 | ||
| TLE49645MXTMA1 | Infineon Technologies AG | Solid State Magnetic Sensor Unipolar Switch Hall Effect SOT-23-3 T/R RoHS : Compliant |
| 44,000 | ||
| TLE49641MXTSA1 | Infineon Technologies AG | Solid State Magnetic Sensor Unipolar Switch Hall Effect SOT-23-3 T/R RoHS : Compliant |
| 41 | ||
| A2C0349640000 | Infineon Technologies AG | STD SPI |
| 665 | ||
| TLE49643MXTSA1 | Infineon Technologies AG | Solid State Magnetic Sensor Unipolar Switch Hall Effect SOT-23-3 T/R RoHS : Compliant |
| 2,130 | ||
| TLE49643MXTMA1 | Infineon Technologies AG | Solid State Magnetic Sensor Unipolar Switch Hall Effect SOT-23-3 T/R RoHS : Compliant |
| 4,995 | ||
| TLE49641KXTSA1 | Infineon Technologies AG | Solid State Magnetic Sensor Unipolar Switch Hall Effect SOT-23-3 T/R RoHS : Compliant |
| 283,145 | ||
| TLV49645TAXBXA1 | Infineon Technologies AG | Hall Effect Sensor, 2.8mT Min, 10.4mT Max, 0-25mA, Rectangular, 3 Pin, Through Hole Mount RoHS : Compliant |
| 4,454 | ||
| TLE49642MXTSA1 | Infineon Technologies AG | Solid State Magnetic Sensor Unipolar Switch Hall Effect SOT-23-3 T/R RoHS : Compliant |
| 2,466 | ||
| TLE49642KXTSA1 | Infineon Technologies AG | Solid State Magnetic Sensor Unipolar Switch Hall Effect SOT-23-3 T/R RoHS : Compliant |
| 303,000 | ||
TLE49644MXTMA1![]() | Infineon Technologies AG | Solid State Magnetic Sensor Unipolar Switch Hall Effect SOT-23-3 T/R RoHS : Compliant |
| 105,436 | ||
| A4964KJPTR-T | Allegro MicroSystems LLC | Motor Driver ICs Controller - Commutation, Direction Management 48-QFP T/R RoHS : Compliant |
| 6,821 | ||
| MAX4964ETT+ | Maxim Integrated Products | MAX4964 - Semiconductor (Obsolete Product) RoHS : Compliant |
| 2,816 | ||
| L4964 | STMicroelectronics | L4964 - Power Management-DC-DC SWITCHING RoHS : Compliant |
| 1,350 | ||
![]() Sager | 110-44-964-41-001000 | Mill-Max Mfg Corp | IC & Component Sockets 64P TIN PIN TIN CONT RoHS : Compliant |
| 0 | |
1424964![]() | Phoenix Contact | Sensor Cables / Actuator Cables SAC-3P-MR/ 3,0-547/ FR SCO BK RoHS : Compliant |
| 0 | ||
| 70230-4964 | OMRON Electronic Components | Safety Light Curtains TYPE: SYSTEM, SAFETY LIGHT CURTAIN, MODEL MSF4800S-20-1160-20-0320-10X-10R -003XI-003RI-RM2APB -003XI-003RI-SB1-RM2APB | 0 | |||
| BA2-X0-04-964-121-D | Carling Technologies | Circuit Breakers | 0 | |||
| 539496-4 | TE Connectivity | TE Connectivity SETZFINGER KOMPL. | 0 | |||
| 4-964300-1 | TE Connectivity | Automotive Connectors TAB 2.8X0.8 RoHS : Compliant |
| 0 | ||
| ADQC-4049-640 | Merkle-Korff Industries | Merkle-Korff | 0 | |||
| 2294964-2 | TE Connectivity | Circular MIL Spec Connector CIRCULAR HD, RCPTCLE FREE HANGING |
| 0 | ||
| 1724964 | Phoenix Contact | Fixed Terminal Blocks PTDA 1.5/ 6-3.5 6P 3.5MM FIXED RoHS : Compliant |
| 0 | ||
| 1496476-3 | TE Connectivity | USB Cables / IEEE 1394 Cables STD-A TO MINI-B ASSY 2.0 METER RoHS : Compliant |
| 0 | ||
| 1549644 | Phoenix Contact | HC-CME-DD-107-F-SNAP-L RoHS : Compliant |
| 0 | ||
| 1749641 | Phoenix Contact | Pluggable Terminal Blocks 14 Pos 3.81mm pitch Through Hole Header RoHS : Compliant |
| 0 | ||
| 1496476-2 | TE Connectivity | USB Cables / IEEE 1394 Cables STD-A TO MINI-B ASSY 1.5 METER RoHS : Compliant |
| 0 | ||
| 1549643 | Phoenix Contact | Phoenix Contact HC-CME-DD-71-M RoHS : Compliant |
| 0 | ||
| 2294964-1 | TE Connectivity | Standard Circular Connector CIRCULAR HD, RECEPT FREE HANGING |
| 0 | ||
![]() TME | 4-1614964-4 | TE Connectivity | Resistor: thin film; 22Ω; SMD; 1206; 125mW; 3.05x1.55x0.55mm RoHS : Compliant |
| 1,000 | |
| 1249644 | Lapp Group | Wire; ÖLFLEX® HEAT 180 SiF A; silicone; SiF A; 1x1mm2; stranded RoHS : Compliant |
| 90 | ||
| 1249640 | Lapp Group | Wire; ÖLFLEX® HEAT 180 SiF A; silicone; SiF A; 1x0.25mm2; Cu RoHS : Compliant |
| 44 | ||
| 10-184964-123 | Amphenol Corporation | 10-184964-123 |
| 31 | ||
| 10-184964-243 | Amphenol Corporation | Connector: circular; Automotive |
| 26 | ||
| 1249642 | Lapp Group | Wire; ÖLFLEX® HEAT 180 SiF A; silicone; SiF A; 1x0.5mm2; stranded RoHS : Compliant |
| 14 | ||
| 4964 | Pololu Corporation | Converter: step up / step down; Uout: 3.3V; Uin: 1.4÷16V; 1.5A |
| 5 | ||
| 704.964.5 | EAO AG | Terminal cover; 04; plastic RoHS : Compliant |
| 3 | ||
| 1496440000 | Weidmüller Interface GmbH & Co. KG | Tip: ring; M10; 150÷150mm2; crimped; for cable; non-insulated RoHS : Compliant |
| 0 | ||
| 5907559504964 | Eltrim Kable Sp zoo | Wire; H07V-K; stranded; Cu; 16mm2; PVC; yellow; 450V,750V; Class: 5 |
| 0 | ||
| 10054964 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 40; THT; 3A; 250V |
| 0 | ||
| 1844964 | Phoenix Contact | Connector: pluggable terminal block; power supply; COMBICON S RoHS : Compliant |
| 0 | ||
| 4964-SS-24 | Pomona Electronics | Test lead: single; 60VDC; 30VAC; BNC plug,both sides; Len: 0.61m RoHS : Compliant |
| 0 | ||
| 1496450000 | Weidmüller Interface GmbH & Co. KG | Tip: ring; M12; 150÷150mm2; for cable; non-insulated; 13mm RoHS : Compliant |
| 0 | ||
| 52024964 | Lapp Group | Cable gland; PG16; IP68; brass; metallic RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | L4964 | STMicroelectronics | IC: driver; DC/DC converter; 5.1÷40VDC; 4A; MULTIWATT15 RoHS : Compliant | 3,696 | ||
![]() ComSIT USA | LFXTAL034964REEL | IQD Frequency Products | CRYSTAL 16MHz �50ppm �100ppm 4-SMD RoHS : Compliant | 12,000 | ||
| T322D336K015AS4964 | KEMET Corporation | TANTALUM THROUGH-HOLE CAPACITOR Tantalum Capacitor, Polarized, Tantalum (dry/solid), 15V, 10% +Tol, 10% -Tol, 33uF, Through Hole Mount RoHS : Not Compliant | 7,720 | |||
| 13649649 | Delphi Automotive LLP | 2 WAY BLACK METRI-PACK 150 UNSEALED MALE CONNECTOR Combination Line Connector RoHS : Compliant | 4,000 | |||
| TLE49642MXTSA1 | Infineon Technologies AG | Solid State Magnetic Sensor Unipolar Switch Hall Effect SOT-23-3 T/R RoHS : Compliant | 3,707 | |||
| L4964 | STMicroelectronics | Switching Regulator, Voltage-mode, 4A, 120kHz Switching Freq-Max, BIPolar, PZFM15 RoHS : Compliant | 2,822 | |||
![]() Interstate Connecting Components | 1149-6419 | Amphenol SV Microwave | BMB MLE to 2.92mm MLE ADPT ADPT (1 SB) RoHS : Compliant |
| 0 | |
| 3-1614964-2 | TE Connectivity | CPF 1206 6R8 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| M85049/6-41N | Amphenol PCD | 26482 SII/83723 SIII/5015 Backshell Env-EMI/RFI |
| 0 | ||
| M85049/6-41N | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S | 0 | |||
| 2349642-2 | TE Connectivity | CAGE ASSY, 1X4, QSFP28, SPRING | 0 | |||
| A85049643X | Amphenol PCD | M850496-43X | 0 | |||
| M85049/6-44W | Amphenol PCD | 26482 SII/83723 SIII/5015 Backshell Env-EMI/RFI |
| 0 | ||
| M85049/6-44W | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S |
| 0 | ||
| GS85049/64-14W | Glenair Inc | D52 - CONNECTOR ACCESSORY | 0 | |||
| M85049/6-42W | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S |
| 0 | ||
| M85049/6-42W | Amphenol PCD | 26482 SII/83723 SIII/5015 Backshell Env-EMI/RFI |
| 0 | ||
| M85049/6-4S | Glenair Inc | RFI/EMI ENVIRON ADAPTER STAINLESS STEEL | 0 | |||
| A85049641X | Amphenol PCD | M850496-41X | 0 | |||
| 1770-4964-2 | Glenair Inc | HERMETIC MICRO-D ADD $900.00 NASA SCREEN | 0 | |||
| 1770-4964-1 | Glenair Inc | HERMETIC MICRO-D ADD $900 NASA SCREEN | 0 | |||
![]() PEI Genesis | 1149-6419 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | |
| 10-184964-08U | Amphenol Corporation |
| 0 | |||
| M85049/6-41N | SOURIAU-SUNBANK |
| 0 | |||
| M85049/6-41N | Amphenol PCD |
| 0 | |||
| M85049/6-43B | SOURIAU-SUNBANK |
| 0 | |||
| M85049/6-44W | SOURIAU-SUNBANK |
| 0 | |||
| M85049/6-44W | Amphenol PCD |
| 0 | |||
| M85049/6-42W | SOURIAU-SUNBANK |
| 0 | |||
| M85049/6-42W | Amphenol PCD |
| 0 | |||
| M85049/6-4S | SOURIAU-SUNBANK |
| 0 | |||
| 10-184964-22U | Amphenol Corporation |
| 0 | |||
| U10-184964-081 | Amphenol Corporation |
| 0 | |||
| M85049/6-4B | SOURIAU-SUNBANK |
| 0 | |||
| 1149-6413 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
| 10-184964-18U | Amphenol Corporation |
| 0 | |||
![]() PUI | 2349-64G00DPN3T-P | 330 | ||||
![]() Chip 1 Exchange | 49646/8840A17 K1 | Lumberg Connect GmbH | INSTOCK | 3,600 | ||
| 1649-645 | INSTOCK | 1,050 | ||||
![]() Avnet Abacus | 1724964 | Phoenix Contact | PTDA 15 635 PTDA15635 (Alt: 1724964) RoHS : Compliant | 0 | ||
| 1749641 | Phoenix Contact | MCDN 1514G1381 P26THR MCDN1514G1381P26THR (Alt: 1749641) RoHS : Compliant | 0 | |||
| 524964-E | TE Connectivity | SRCA 254 10 M 1KS SMD 137 E1 094 GUR T OZ J 2 524963 MAXIBRIDGE A (Alt: 524964-E) RoHS : Compliant | 0 | |||
| 15496486 | Aptiv PLC | Connector Position Assurance Lock for Automotive Connectors Polyamide 6 Natural (Alt: 15496486) RoHS : Compliant | 0 | |||
| 121496-4 | TE Connectivity | Conn Backplane RCP 100 POS 254mm Solder ST ThruHole (Alt: 121496-4) RoHS : Not Compliant | 0 | |||
| 314964-1 | TE Connectivity | (Alt: 314964-1) RoHS : Not Compliant | 0 | |||
| 1496476-6 | TE Connectivity | Cable Assembly USB 1m 28AWG 5 POS USB to 4 POS USB PLPL SolderSolder Bag (Alt: 1496476-6) RoHS : Compliant | 0 | |||
| 1544964-1 | TE Connectivity | Contact SKT Crimp ST Cable Mount (Alt: 1544964-1) RoHS : Compliant | 0 | |||
| 1544964-1 | TE Connectivity | Contact SKT Crimp ST Cable Mount (Alt: 1544964-1) RoHS : Compliant | 0 | |||
| 1496476-3 | TE Connectivity | Cable Assembly USB 2m 24AWG28AWG 5 POS USB to 4 POS USB PLPL SolderSolder Bag (Alt: 1496476-3) RoHS : Compliant | 0 | |||
| 1496476-2 | TE Connectivity | (Alt: 1496476-2) RoHS : Compliant | 0 | |||
| 1338496-4 | TE Connectivity | (Alt: 1338496-4) RoHS : Not Compliant | 0 | |||
| 1614964-1 | TE Connectivity | SMD Chip Resistor 100 kOhm 01 125 mW 1206 3216 Metric Thin Film (Alt: 1614964-1) RoHS : Compliant | 0 | |||
| 1614964-2 | TE Connectivity | SMD Chip Resistor 100 kOhm 01 125 mW 1206 3216 Metric Thin Film (Alt: 1614964-2) RoHS : Not Compliant | 0 | |||
| 4-964284-1 | TE Connectivity | (Alt: 4-964284-1) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 1496476-2 | TE Connectivity | (Alt: 1496476-2) RoHS : Compliant | 0 | ||
![]() Avnet Silica | 1N4964 | Microchip Technology Inc | (Alt: 1N4964) RoHS : Not Compliant | 0 | ||
| 1N4964US | Microchip Technology Inc | 18V 65mA 9A Voltage Regulator SQ SMT (Alt: 1N4964US) RoHS : Compliant | 0 | |||
| 1N4964/TR | Microchip Technology Inc | (Alt: 1N4964/TR) RoHS : Compliant | 0 | |||
| JAN1N4964 | Microchip Technology Inc | (Alt: JAN1N4964) RoHS : Not Compliant | 0 | |||
| JANTX1N4964 | Microchip Technology Inc | (Alt: JANTX1N4964) RoHS : Not Compliant | 0 | |||
| JANTXV1N4964 | Microchip Technology Inc | (Alt: JANTXV1N4964) RoHS : Not Compliant | 0 | |||
| JANS1N4964US | Microchip Technology Inc | (Alt: JANS1N4964US) RoHS : Compliant | 0 | |||
| JANTX1N4964US | Microchip Technology Inc | (Alt: JANTX1N4964US) RoHS : Compliant | 0 | |||
| JANTXV1N4964US | Microchip Technology Inc | (Alt: JANTXV1N4964US) RoHS : Not Compliant | 0 | |||
| JANTX1N4964/TR | Microchip Technology Inc | (Alt: JANTX1N4964/TR) RoHS : Not Compliant | 0 | |||
![]() Component Electronics, Inc | 4964-SS-60 | Pomona Electronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | |
![]() EBV Elektronik | TLE49644MXTSA1 | Infineon Technologies AG | Hall Effect Switch 10 mT 85 mT 3 V to 32 V 3 Pins SOT23 (Alt: SP001042414) RoHS : Compliant | 2,688,000 | ||
| JANTX1N4964US | Microchip Technology Inc | (Alt: JANTX1N4964US) RoHS : Compliant | 0 | |||
| TLE49645MXTSA1 | Infineon Technologies AG | Hall Effect Sensor 25mA Unipolar 33V5V9V12V15V18V24V 3Pin SOT23 TR (Alt: SP000997958) RoHS : Compliant | 0 | |||
| TLE49646MXTSA1 | Infineon Technologies AG | Hall Effect Switch High Precision AECQ100 Unipolar Hall Effect Switch 00035 T 00025 T 3 V (Alt: SP001042418) RoHS : Compliant | 0 | |||
| TLE49643KXTSA1 | Infineon Technologies AG | Hall Effect Switch Omnipolar 20 Gauss 10 Gauss 3 V to 28 V 3 Pins SOT23 (Alt: SP000910188) RoHS : Compliant | 0 | |||
| TLE49645MXTMA1 | Infineon Technologies AG | Hall Effect Sensor 25mA Unipolar 3V to 32V 3Pin SOT23 TR (Alt: SP001328246) RoHS : Compliant | 0 | |||
| TLE49641MXTSA1 | Infineon Technologies AG | Hall Effect Sensor 25mA Unipolar 33V5V9V12V15V18V24V 3Pin SOT23 TR (Alt: SP000923326) RoHS : Compliant | 0 | |||
| TLE49641MXTMA1 | Infineon Technologies AG | Hall Effect Sensor 25mA Unipolar 3V to 32V 3Pin SOT23 TR (Alt: SP001328238) RoHS : Compliant | 0 | |||
| TLE49643MXTSA1 | Infineon Technologies AG | Hall Effect Sensor 25mA Unipolar 33V5V9V12V15V18V24V 3Pin SOT23 TR (Alt: SP001013860) RoHS : Compliant | 0 | |||
| TLE49643MXTMA1 | Infineon Technologies AG | (Alt: SP001328242) RoHS : Compliant | 0 | |||
| TLE49641KXTSA1 | Infineon Technologies AG | Hall Effect Sensor 25mA Unipolar 33V5V9V12V15V18V24V 3Pin SC59 TR (Alt: SP000848000) RoHS : Compliant | 0 | |||
| TLV49644TAXBXA1 | Infineon Technologies AG | POSITIONCURRENT SENSORS (Alt: SP001274780) RoHS : Compliant | 0 | |||
| W1192-496428/SPD2025-4X | Broadcom Limited | SPD20254X Mechanical Samples (Alt: W1192-496428/SPD2025-4X) RoHS : Compliant | 0 | |||
| W1192-496428/AFCD-V74KN2 | Broadcom Limited | AFCDV74KN2 Mechanical Samples (Alt: W1192-496428/AFCD-V74KN2) RoHS : Compliant | 0 | |||
| FCP14964_FLORENTINA-2X2-SS | LEDIL | Holder Assembly with Lens Square 2x2 POS Polycarbonate 1772mm Height Black Box (Alt: FCP14964_FLORENTINA-2X2-SS) RoHS : Compliant | 0 | |||
![]() Master Electronics | M85049/6-42W | Amphenol PCD | Backshell - Env-EMI/RFI - Cadmium RoHS : Compliant |
| 18 | |
| 3-1614964-2 | TE Connectivity | CPF 1206 6R8 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| JANS1N4964CUS | Microchip Technology Inc | 5W Zener Diode - 18 Volt ±2% - Glass - SMD - MIL-PRF-19500/356 RoHS : Compliant |
| 0 | ||
| 144-9649-000 | ITT Interconnect Solutions | Insul 2 De 19 Skt Double / 144-9649-000 / Micro RoHS : Compliant |
| 0 | ||
| JAN1N4964US/TR | Microchip Technology Inc | 5W Zener Diode - 18 Volt ±5% - Glass - SMD - Tape&Reel - MIL-PRF-19500/356 RoHS : Compliant |
| 0 | ||
| JANTX1N4964DUS/TR | Microchip Technology Inc | 5W Zener Diode - 18 Volt ±1% - Glass - SMD - Tape&Reel - MIL-PRF-19500/356 RoHS : Compliant |
| 0 | ||
| JANS1N4964CUS/TR | Microchip Technology Inc | 5W Zener Diode - 18 Volt ±2% - Glass - SMD - Tape&Reel - MIL-PRF-19500/356 RoHS : Compliant |
| 0 | ||
| 5-1614964-8 | TE Connectivity | CPF 1206 82R 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 1N4964CUS/TR | Microchip Technology Inc | 5W Zener Diode - 18 Volt ±2% - Glass - SMD - Tape&Reel RoHS : Compliant |
| 0 | ||
1424964![]() | Phoenix Contact | Sensor/actuator cable - 3-position - PVC - yellow - Plug angled M12 SPEEDCON - A-coded - on Socket angled M12 SPEEDCON - A-coded - cable length: 3 m RoHS : Compliant |
| 0 | ||
| 4-1614964-7 | TE Connectivity | CPF 1206 30R 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 1544964-1 | TE Connectivity | 8MM NG1+ TERMINAL RoHS : Compliant |
| 0 | ||
| 7-1614964-5 | TE Connectivity | CPF 1206 470R 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 3-1879496-4 | TE Connectivity | CRGH0805 5% 300K 0.33W RoHS : Compliant |
| 0 | ||
| JAN1N4964D | Microchip Technology Inc | 5W Zener Diode - 18 Volt ±1% - Glass - Through Hole - MIL-PRF-19500/356 RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C4964 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to BNC Male Cable Using RG400 Coax., Radio frequency assembly snap-on BMA jack to BNC male cable using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to BNC male cable using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and BNC cable connection on the other. Our BMA to BNC cable assemblies have a jack gender on end 1 and male on end 2. This BMA to BNC cable is a jack to male coax assembly, PE3C4964, can also be known as a BMA female to BNC plug cable assembly and will be shipped same-day as it is purchased. BMA female to BNC plug cable assembly PE3C4964 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BMA jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4964 can also be used in the other direction and will be BNC male to BMA jack cable assembly if the opposite connectivity is required. BMA female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to BNC male cable using RG400 coax. | 485 | ||
| PE3496-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male to N Male Cable 48 Inch Length Using RG213 Coax., Radio frequency assembly N male to N male cable 48 inch length using RG213 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 48 inch length using RG213 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE3496-48, can also be known as a type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3496-48 is built with RG213 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 48 inch length using RG213 coax. |
| 334 | ||
| PE3C4964-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 6 inches. Snap-On BMA Jack to BNC Male Cable 6 Inch Length Using RG400 Coax., Radio frequency assembly snap-on BMA jack to BNC male cable 6 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to BNC male cable 6 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and BNC cable connection on the other. Our BMA to BNC cable assemblies have a jack gender on end 1 and male on end 2. This BMA to BNC cable is a jack to male coax assembly, PE3C4964-6, can also be known as a BMA female to BNC plug cable assembly and will be shipped same-day as it is purchased. BMA female to BNC plug cable assembly PE3C4964-6 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BMA jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4964-6 can also be used in the other direction and will be BNC male to BMA jack cable assembly if the opposite connectivity is required. BMA female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to BNC male cable 6 inch length using RG400 coax. |
| 97 | ||
| PE3C4964-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 36 inches. Snap-On BMA Jack to BNC Male Cable 36 Inch Length Using RG400 Coax., Radio frequency assembly snap-on BMA jack to BNC male cable 36 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to BNC male cable 36 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and BNC cable connection on the other. Our BMA to BNC cable assemblies have a jack gender on end 1 and male on end 2. This BMA to BNC cable is a jack to male coax assembly, PE3C4964-36, can also be known as a BMA female to BNC plug cable assembly and will be shipped same-day as it is purchased. BMA female to BNC plug cable assembly PE3C4964-36 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BMA jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4964-36 can also be used in the other direction and will be BNC male to BMA jack cable assembly if the opposite connectivity is required. BMA female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to BNC male cable 36 inch length using RG400 coax. |
| 97 | ||
| PE3C4964-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 12 inches. Snap-On BMA Jack to BNC Male Cable 12 Inch Length Using RG400 Coax., Radio frequency assembly snap-on BMA jack to BNC male cable 12 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to BNC male cable 12 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and BNC cable connection on the other. Our BMA to BNC cable assemblies have a jack gender on end 1 and male on end 2. This BMA to BNC cable is a jack to male coax assembly, PE3C4964-12, can also be known as a BMA female to BNC plug cable assembly and will be shipped same-day as it is purchased. BMA female to BNC plug cable assembly PE3C4964-12 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BMA jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4964-12 can also be used in the other direction and will be BNC male to BMA jack cable assembly if the opposite connectivity is required. BMA female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to BNC male cable 12 inch length using RG400 coax. |
| 97 | ||
| PE3C4964-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 24 inches. Snap-On BMA Jack to BNC Male Cable 24 Inch Length Using RG400 Coax., Radio frequency assembly snap-on BMA jack to BNC male cable 24 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to BNC male cable 24 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and BNC cable connection on the other. Our BMA to BNC cable assemblies have a jack gender on end 1 and male on end 2. This BMA to BNC cable is a jack to male coax assembly, PE3C4964-24, can also be known as a BMA female to BNC plug cable assembly and will be shipped same-day as it is purchased. BMA female to BNC plug cable assembly PE3C4964-24 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BMA jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4964-24 can also be used in the other direction and will be BNC male to BMA jack cable assembly if the opposite connectivity is required. BMA female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to BNC male cable 24 inch length using RG400 coax. |
| 97 | ||
| PE3C8496-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-375, RF Cable Type: SPF-375, RF Cable Impedance: 50 Ohm, Length: 48 inches. Fire Rated 7/16 DIN Male to N Male Low PIM Cable 48 Inch Length Using SPF-375 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 7/16 DIN male to N male low PIM cable 48 inch length using SPF-375 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 7/16 DIN male to N male low PIM cable 48 inch length using SPF-375 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and N type cable connection on the other. Our low PIM 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to N type cable is a male to male coax assembly, PE3C8496-48, can also be known as a low PIM 7/16 DIN plug to type N plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3C8496-48 is built with SPF-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 7/16 DIN male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8496-48 can also be used in the other direction and will be N type male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 7/16 DIN male to N male low PIM cable 48 inch length using SPF-375 coax using Times Microwave parts. |
| 40 | ||
| PE3W03496-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 48 inches. 10-32 Female to BNC Male Cable 48 Inch Length Using RG178 Coax., Radio frequency assembly 10-32 female to BNC male cable 48 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 10-32 female to BNC male cable 48 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10-32 to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 10-32 cable connection on one end and BNC cable connection on the other. Our 10-32 to BNC cable assemblies have a female gender on end 1 and male on end 2. This 10-32 to BNC cable is a female to male coax assembly, PE3W03496-48, can also be known as a 10-32 jack to BNC plug cable assembly and will be shipped same-day as it is purchased. 10-32 jack to BNC plug cable assembly PE3W03496-48 is built with RG178 which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with 10-32 to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency 10-32 female to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03496-48 can also be used in the other direction and will be BNC male to 10-32 female cable assembly if the opposite connectivity is required. 10-32 jack to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10-32 female to BNC male cable 48 inch length using RG178 coax. |
| 14 | ||
| PE3C9496-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length, Max: 48 inches. SHV Plug Right Angle to SHV Plug Right Angle Cable 48 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly SHV plug right angle to SHV plug right angle cable 48 inch length using 75 Ohm RG59 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV plug right angle to SHV plug right angle cable 48 inch length using 75 Ohm RG59 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SHV cable connection on one end and right angle SHV cable connection on the other. Our right angle SHV to right angle SHV cable assemblies have a plug gender on end 1 and plug on end 2. PE3C9496-48 can also be known as a right angle SHV male to right angle SHV male cable assembly and will be shipped same-day as it is purchased. SHV male to SHV male cable assembly PE3C9496-48 is built with RG59 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with right angle SHV to right angle SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency SHV right angle plug to SHV right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV right angle male to SHV right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV plug right angle to SHV plug right angle cable 48 inch length using 75 Ohm RG59 coax. |
| 8 | ||
| PE44964 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: SMP, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: Thread-In, Interface Type 1: Pin. SMP Male Smooth Bore Connector Solder Attachment Thread-In Mount Pin Terminal .065 inch Pin Length Pre-Tinned. PE44964 SMP male thread-in terminal smooth bore connector has an interface type of pin and a 50 Ohm impedance. Pasternack SMP male thread-in connector uses shield/contact solder as an attachment method. The Pasternack SMP male thread-in terminal smooth bore connector has a PTFE dielectric type. The Pasternack SMP terminal connector has a passivated stainless steel body. Our PE44964 SMP connector uses beryllium copper contact. This SMP male thread-in terminal smooth bore RF connector is RoHS and REACH compliant. This Pasternack male SMP thread-in connector will ship the same day as purchased. Our thread-in SMP male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMP connector cable assemblies that will ship the same day as well. |
| 2 | ||
| PE3W04964 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. 2.92mm Male to SMP Female Right Angle Cable Using Tinned RG405 Coax. PE3W04964 is a 2.92mm male to SMP female right angle cable using RG405 Tinned coax. This Pasternack 2.92mm male to SMP female right angle cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMP for connector 2. 2.92mm to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 2.92mm to female SMP right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04964 2.92mm male to SMP female right angle cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3W24964 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to Mini SMP Male Cable Using PE-P047HF Coax. PE3W24964 is a Mini SMP female right angle to Mini SMP male cable using PE-P047HF coax. This Pasternack Mini SMP female right angle to Mini SMP male cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm Mini SMP for connector 2. Mini SMP right angle to Mini SMP coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP right angle to male Mini SMP cable assembly uses a high flex cable type that is 50 Ohm. Pasternack PE3W24964 Mini SMP female right angle to Mini SMP male cable assembly is constructed with PE-P047HF coax. | 0 | |||
| PE4964 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: C, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: Bulkhead, Interface Type 1: RG214, Interface Type 2: RG213, Interface Type 3: RG393, Interface Type 4: RG8, Interface Type 5: RG225, Interface Type 6: RG11, Interface Type 7: RG216, Interface Type 8: RG144, Interface Type 9: RG215, Interface Type 10: RG9. C Female Bulkhead Connector Clamp/Solder Attachment For RG213, RG214, RG8, RG9, RG11, RG225, RG393, .720 inch D Hole. PE4964 type C female bulkhead coaxial connector has an interface type of RG214, RG213, RG393, RG8, RG225, RG11, RG216, RG144, RG215, RG9 and a 50 Ohm impedance. Pasternack type C female bulkhead connector uses shield/contact clamp/solder as an attachment method. The Pasternack C type female bulkhead coaxial connector has a PTFE dielectric type. The Pasternack C type coaxial connector has a brass body with nickel plating. This type C female bulkhead coaxial RF connector is RoHS and REACH compliant. This Pasternack female C type bulkhead connector will ship the same day as purchased. Our bulkhead type C female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom type C connector cable assemblies that will ship the same day as well. |
| 0 | ||
| PE3W14964 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SMA Male Right Angle Cable Using LMR-LW195 Coax. PE3W14964 is a TNC female bulkhead to SMA male right angle cable using LMR-LW195 coax. This Pasternack TNC female bulkhead to SMA male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female TNC bulkhead to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14964 TNC female bulkhead to SMA male right angle cable assembly is constructed with LMR-LW195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE34496-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMC Plug to SMC Plug Right Angle Cable 48 Inch Length Using RG400 Coax., Radio frequency assembly SMC plug to SMC plug right angle cable 48 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to SMC plug right angle cable 48 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and right angle SMC cable connection on the other. Our SMC to right angle SMC cable assemblies have a plug gender on end 1 and plug on end 2. This SMC to SMC cable is a plug to plug coax assembly, PE34496-48, can also be known as a SMC male to right angle SMC male cable assembly and will be shipped same-day as it is purchased. SMC male to SMC male cable assembly PE34496-48 is built with RG400 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to right angle SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMC plug to SMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34496-48 can also be used in the other direction and will be right angle SMC plug to SMC plug cable assembly if the opposite connectivity is required. SMC male to SMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to SMC plug right angle cable 48 inch length using RG400 coax. |
| 0 | ||
![]() Vyrian | 1496476-3 | TE Connectivity | Interconnection Device RoHS : Compliant | 12,066 | ||
| W1192-496428/SPD2025-4X | Broadcom Limited | 9,849 | ||||
| 1749641 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 2 Row(s), 2 Deck(s) RoHS : Compliant | 9,045 | |||
| JANTX1N4964US | Microchip Technology Inc | Zener Diode, 18V V(Z), 5%, 5W, Silicon, Unidirectional RoHS : Not Compliant | 8,685 | |||
| W1192-496428 | Broadcom Limited | 8,253 | ||||
| L4964HT | STMicroelectronics | Switching Regulator, Voltage-mode, 4A, 120kHz Switching Freq-Max, BIPolar, PZFM15 RoHS : Compliant | 7,580 | |||
| L4964 | STMicroelectronics | Switching Regulator, Voltage-mode, 4A, 120kHz Switching Freq-Max, BIPolar, PZFM15 RoHS : Compliant | 5,754 | |||
| W1202-496428 | Broadcom Limited | 4,202 | ||||
| 5962-01-414-9645 | AMD Xilinx | Field Programmable Gate Array, 70MHz, 144-Cell, CMOS, CPGA84 | 3,773 | |||
| TLE49643KXTSA1 | Infineon Technologies AG | Hall Effect Sensor, 6.1mT Min, 16.6mT Max, 0-25mA, Plastic/epoxy, Rectangular, 3 Pin, Surface Mount RoHS : Compliant | 3,562 | |||
| CT144964 | Micron Technology, Inc | 3,409 | ||||
| W1192-496428/AFCD-V74KN2 | Broadcom Limited | 3,284 | ||||
| MGF4964BL | Mitsubishi Electric | RF Small Signal Field-Effect Transistor, 1-Element, K Band, Gallium Arsenide, P-Channel, High Electron Mobility FET | 863 | |||
| TLE49642MXTSA1/SAMPLE | Infineon Technologies AG | Hall Effect Sensor, 15.9mT Min, 36mT Max, 0-25mA, Rectangular, Surface Mount RoHS : Unknown | 264 | |||
| TLE49642MXTMA1/SAMPLE | Infineon Technologies AG | Hall Effect Sensor, 15.9mT Min, 36mT Max, 0-25mA, Rectangular, Surface Mount RoHS : Unknown | 202 | |||
![]() Win Source Electronics | TLE4964-6M | Infineon Technologies AG | Board Mount Hall Effect / Magnetic Sensors POSITION SENS ATV RoHS : Compliant |
| 27,956 | |
| TLE49646MXTSA1 | Infineon Technologies AG | MAG SWITCH UNIPOLAR SOT23-3 RoHS : Compliant |
| 25,940 | ||
TLE49646MXTMA1![]() | Infineon Technologies AG | MAG SWITCH UNIPOLAR SOT23-3 / Digital Switch Unipolar Switch Open Drain Hall Effect PG-SOT23-3-15 RoHS : Compliant |
| 25,380 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |