| Electronic Components Datasheet Search |
|
4945 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Onlinecomponents.com | 121575-4945 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 16-11 - Sockets - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Compliant |
| 0 | |
| 00-4945 | Woodhead Molex | GROMMET-922J- F2 BLACK MAX-LOC.203X.328S RoHS : Compliant |
| 0 | ||
| 4945-K-24 | Pomona Electronics | RoHS : Compliant |
| 0 | ||
| 4945-K-18 | Pomona Electronics | RoHS : Compliant |
| 0 | ||
| 4945-K-60 | Pomona Electronics | RoHS : Compliant |
| 0 | ||
| 4945-K-36 | Pomona Electronics | Cable Assembly PVC 0.914m BNC to 2(Pin Receptacle) M-PIN/PIN RoHS : Compliant |
| 0 | ||
| 4945-K-48 | Pomona Electronics | Cable Assembly PVC 1.219m BNC to 2(Pin Receptacle) M-PIN/PIN RoHS : Compliant |
| 0 | ||
| XN-4005-4945-9 | 3M Interconnect | 3M TWIN AXIAL PCI EXPRESS RoHS : Compliant |
| 0 | ||
| 11-40-4945 | Molex | CONDUCTOR PUNCH RoHS : Compliant |
| 0 | ||
| 11-18-4945 | Molex | 60808A103 INSULATION PUNCH RoHS : Compliant |
| 0 | ||
| JBH-4945-KO | BUD Industries Inc | The JBH-4945-KO is a 16-gauge steel junction box featuring a hinged cover, a quarter-turn latch, and multiple conduit knockouts. RoHS : Compliant |
| 0 | ||
![]() Verical | 49456-1047 | Molex | Conn FPC Connector SKT 10 POS 1mm Solder RA SMD T/R RoHS : Compliant |
| 55,200 | |
| 49456-1257 | Molex | 1.0 FPC/FFC B/F Assy 12 CKT RoHS : Compliant |
| 9,600 | ||
| 49456-1217 | Molex | Conn FFC Connector SKT 12 POS 1mm Solder RA Thru-Hole BackFlip™ T/R RoHS : Compliant |
| 8,400 | ||
| 49456-1017 | Molex | Conn FFC Connector SKT 10 POS 1mm Solder RA SMD BackFlip™ T/R RoHS : Compliant |
| 4,800 | ||
| 49456-1047 | Molex | Conn FPC Connector SKT 10 POS 1mm Solder RA SMD T/R RoHS : Compliant |
| 1,200 | ||
![]() Avnet Americas | 249-4517-000 | ITT Interconnect Solutions | - Bulk (Alt: 249-4517-000) RoHS : Compliant |
| 100 | |
| M85049/45W18 | Glenair Inc | - Bulk (Alt: M85049/45W18) RoHS : Not Compliant |
| 0 | ||
| 8-146494-5 | TE Connectivity | - Bulk (Alt: 8-146494-5) RoHS : Compliant | 0 | |||
| 654E34945C2T | CTS Corporation | - Tape and Reel (Alt: 654E34945C2T) RoHS : Compliant | 0 | |||
| 10-522494-56P | Amphenol Corporation | - Bulk (Alt: 10-522494-56P) RoHS : Not Compliant |
| 0 | ||
| 2549450000 | Weidmüller Interface GmbH & Co. KG | PCB Plug-In Terminal Block Connector Female PL 7.62mm 5 Position Straight Box - Bulk (Alt: 2549450000) RoHS : Not Compliant |
| 0 | ||
| 10-494596-13G | Amphenol Corporation | - Bulk (Alt: 10-494596-13G) RoHS : Not Compliant |
| 0 | ||
| 10-522494-56S | Amphenol Corporation | - Bulk (Alt: 10-522494-56S) RoHS : Not Compliant |
| 0 | ||
AX7DAF4-945.0000T![]() | Abracon Corporation | - Tape and Reel (Alt: AX7DAF4-945.0000T) RoHS : Compliant | 0 | |||
| 10-494596-117 | Amphenol Corporation | - Bulk (Alt: 10-494596-117) RoHS : Not Compliant |
| 0 | ||
| M85049/45Z18 | Glenair Inc | - Bulk (Alt: M85049/45Z18) RoHS : Not Compliant |
| 0 | ||
| 656V34945C2T | CTS Corporation | - Tape and Reel (Alt: 656V34945C2T) RoHS : Compliant | 0 | |||
| 8-2151494-5 | TE Connectivity | - Bulk (Alt: 8-2151494-5) RoHS : Not Compliant | 0 | |||
AX7DCF4-945.0000T![]() | Abracon Corporation | - Tape and Reel (Alt: AX7DCF4-945.0000T) RoHS : Compliant | 0 | |||
| 654L34945C3T | CTS Corporation | - Tape and Reel (Alt: 654L34945C3T) RoHS : Compliant | 0 | |||
![]() Mouser Electronics | 5819SMJE3/TR13 | Microchip Technology Inc | Schottky Diodes & Rectifiers Small-Signal Schottky RoHS : Compliant |
| 4,844 | |
| 5817SMJe3/TR13 | Microchip Technology Inc | Schottky Diodes & Rectifiers Small-Signal Schottky RoHS : Compliant |
| 3,266 | ||
| 5822SMJe3/TR13 | Microchip Technology Inc | Schottky Diodes & Rectifiers Small-Signal Schottky RoHS : Compliant |
| 3,240 | ||
| 5818SMJe3/TR13 | Microchip Technology Inc | Schottky Diodes & Rectifiers Small-Signal Schottky RoHS : Compliant |
| 1,224 | ||
| 5KP5.0CAE3/TR13 | Microchip Technology Inc | ESD Protection Diodes / TVS Diodes TVS 5000W, Stand-off voltage = 5.0V, +/- 5%, Bi-dir RoHS : Compliant |
| 344 | ||
| 5KP33AE3/TR13 | Microchip Technology Inc | ESD Protection Diodes / TVS Diodes TVS 5000W, Stand-off voltage = 33V, +/- 5%, Uni-dir RoHS : Compliant |
| 251 | ||
| 5KP60AE3/TR13 | Microchip Technology Inc | ESD Protection Diodes / TVS Diodes TVS 5000W, Stand-off voltage = 60V, +/- 5%, Uni-dir RoHS : Compliant |
| 222 | ||
| 494518-E | TE Connectivity | Circular Metric Connectors 12-PIN,A-CODING,SMT RoHS : Compliant |
| 38 | ||
| 4945-K-18 | Pomona Electronics | Test Leads BNC TO.025"SQ.RE RoHS : Compliant |
| 11 | ||
| 4945-K-24 | Pomona Electronics | Test Leads BNC TO.025"SQ.RE RoHS : Compliant |
| 10 | ||
| 4945-K-36 | Pomona Electronics | Test Leads BNC TO.025"SQ.RE RoHS : Compliant |
| 8 | ||
| 4945 | Adafruit Industries | Jumper Wires 2.54mm 0.1 Pitch 18-pin Jumper Cable - 20cm long RoHS : Compliant |
| 0 | ||
| 4945 | Inspired LED | Lighting Cables Cable Adaptor M/M/F |
| 0 | ||
| MMSD-15-24C-L-48.03-S-K | Samtec Inc | Rectangular Cable Assemblies 2.54MM MINI MATE ASSY RoHS : Compliant |
| 0 | ||
| 4945-K-60 | Pomona Electronics | Test Leads BNC TO.025"SQ.RE RoHS : Compliant |
| 0 | ||
![]() Newark | 1-2474494-5 | TE Connectivity | Rf Coax Conn, R/A Fakra Plug, 50 Ohm; |Te Connectivity 1-2474494-5 RoHS : Compliant |
| 778 | |
| 1714945 | Phoenix Contact | Btb Conn, Header, 80Pos, 2Row, 1.27Mm; |Phoenix Contact 1714945 RoHS : Compliant |
| 269 | ||
| 713.650.097.004.945 | ODU Steckverbindungssysteme Gmbh & Co Kg | Dust Cap/Cover, Black, Tpu, Ipx7, Cap; |Odu-Usa 713.650.097.004.945 RoHS : Compliant |
| 246 | ||
| JBH-4945-KO | BUD Industries Inc | Enclosure Met, Electrical/Ind, Steel; |Bud Industries JBH-4945-KO RoHS : Compliant |
| 168 | ||
| 249-4518-000 | ITT Interconnect Solutions | Backshell, Dlm, 60Way; |Itt Cannon 249-4518-000 RoHS : Compliant |
| 96 | ||
| 3109604945 | Kyocera AVX Components | Potentiometer, 250R; |Kyocera Avx 3109604945 RoHS : Compliant |
| 80 | ||
| SC4945 | Fairview Microwave Inc | Rf/Coaxial Connector, 7/16 Din Coaxial; |Fairview Microwave SC4945 RoHS : Not Compliant |
| 64 | ||
| 49454-9003 | Molex | Wire Seal, Red, Bulb Socket; For Use With:Molex S8 & T20 Bulb Sockets; Lamp Socket Size:S8; Accessory Type:Wire Seal; Product Range:49454 Series Rohs Compliant: Yes |Molex 49454-9003 RoHS : Compliant |
| 46 | ||
| 704.945.6 | EAO AG | Cable Gland, Plastic, Grey; |Eao 704.945.6 RoHS : Compliant |
| 10 | ||
| 14945/SP | Bulgin | Contact Removal Tool, For 8 Way; |Bulgin Limited 14945/SP RoHS : Compliant |
| 9 | ||
| 704.945.1 | EAO AG | Enclosure 94 Mm X 94 Mm X 81 Mm Plastic; |Eao 704.945.1 RoHS : Compliant |
| 5 | ||
| 704.945.7 | EAO AG | Enclosure, Yellow/Grey, Plastic, Switch; For Use With:Eao 704 Series Switches; Product Range:04 Series Rohs Compliant: Yes |Eao 704.945.7 RoHS : Compliant |
| 4 | ||
| 249-4501-000 | ITT Interconnect Solutions | Backshell, Dlm, 260Way; |Itt Cannon 249-4501-000 RoHS : Compliant |
| 3 | ||
| 14945/SP | Bulgin | Insertion/Extraction Tool, 8Pole; For Use With:8 Way Connectors; Product Range:6000 Series Rohs Compliant: Yes |Bulgin Limited 14945/SP RoHS : Compliant |
| 2 | ||
| 4945 | Adafruit Industries | 2.54Mm 0.1 Pitch 18-Pin Jumper Cable - 20Cm Long |Adafruit 4945 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX14945EWE+ | Analog Devices Inc | 2.75KV Isolated 500kbps Half-D RoHS : Compliant |
| 9,159 | |
| ADA4945-1CP-EBZ | Analog Devices Inc | Eval board for 16 lead LFCSP RoHS : Compliant |
| 1,094 | ||
| MAX14945EWE+T | Analog Devices Inc | 2.75KV Isolated 500kbps Half-D RoHS : Compliant |
| 94 | ||
| ADA4945-1ACPZ-R2 | Analog Devices Inc | Differential Precision ADC Dri RoHS : Compliant |
| 0 | ||
| ADA4945-1ACPZ-R7 | Analog Devices Inc | Differential Precision ADC Dri RoHS : Compliant |
| 0 | ||
| MAX4945AELA+ | Analog Devices Inc | Overvoltage-Protection Control RoHS : Compliant | 0 | |||
| MAX4945AELA+T | Analog Devices Inc | Overvoltage-Protection Control RoHS : Compliant |
| 0 | ||
| ADA4945-1ACPZ-RL | Analog Devices Inc | Differential Precision ADC Dri RoHS : Compliant |
| 0 | ||
![]() RS | D-SCE-1K-38-50-4 (949459-000) | TE Connectivity | PRINTABLE TUBING, THERMOFIT, FLUID RESISTANT,3:1,YELLOW,1.5, D-SCE SERIES |
| 2,000 | |
| 1494531 | Phoenix Contact | PTV2.5 Q TERMINAL KIT 01-20 POS |
| 171 | ||
| 7649457 | RS Pro | NON-RESETTABLE WIRE ENDED FUSE 2.65MM DIAMETER SPEED FF 0.5A 125VAC/DC QTY X 10 |
| 110 | ||
| 704.945.1 | EAO AG | ENCLOSURE, WITH ANTI-TWIST DEVICE, IP66,94L X 94B X 81H, PLASTIC, GRAY RoHS : Compliant |
| 86 | ||
| 704.945.6 | EAO AG | ACCESSORY, CABLE GLAND, USE ON 04 SERIES ENCLOSURE, M20 X 1.5 THREAD, PLASTIC, GRAY RoHS : Compliant |
| 29 | ||
| LJK-1/8 (4945) | Festo | FITTINGS, ELBOW, HOLLOW BOLT, AIR, G1/8 FEMALE TO G1/8 MALE, ZINC, LJK SERIES |
| 27 | ||
| BI8U-M18M-VP6X-H1141 (1634945) | TURCK Inc | INDUCTIVE PROXIMITY SWITCH M12X1 MALE CONNECTOR DC 4WIRE,10-30VDC |
| 22 | ||
| 14945/SP | Bulgin | INSERTION & EXTRACTION TOOL FOR 6000 SERIES PIN, SOCKET CONTACT |
| 18 | ||
| 704.945.4 | EAO AG | ENCLOSURE, WITH ANTI-TWIST DEVICE, IP66,180L X 180B X 110H, PLASTIC, GRAY RoHS : Compliant |
| 5 | ||
| 2834945 | RS Pro | DUAL M08 ST. 3P FEMALE-ST. 3P MALE 3W 5 |
| 4 | ||
| 4945-K-60 (1915644) | Pomona Electronics | CONNECTOR, BNC (MALE) WITH MOLDED STRAIN RELIEF, GOLD PLATED BRASS, PTFE |
| 3 | ||
| RSFV 49-4.5 IN/14.5 (U7276) | TURCK Inc | CONNECTOR, MALE, PANEL MOUNT, 7/8-16UN, 4.5 INCH WIRES, 316 SS, U7276 |
| 2 | ||
| 833494-50 | AMETEK Inc | BRUSH ASSY, SET OF 2 CARBON BRUSHES (33494) W/HOUSING |
| 1 | ||
| NECU-S-M8G3-HX-Q3 (564945) | Festo | PLUG CONNECTOR, M8 3 PIN, STRAIGHT PLUG, FOR 2.1-3.5 MM CABLE |
| 1 | ||
| 4945 | Adafruit Industries | 2.54MM 0.1 PITCH 18-PIN JUMPER CABLE - 20CM LONG |
| 0 | ||
![]() Microchip Technology Inc | 1N4945 | Microchip Technology Inc | UFR,FRR _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | |
| GC4945-12 | Microchip Technology Inc | Si PIN Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| 1N4945/TR | Microchip Technology Inc | UFR,FRR _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | TLE49452GMELCOHUMA1 | Infineon Technologies AG | Hall Effect Sensor RoHS : Compliant |
| 1,551,000 | |
TLE4945-2G![]() | Infineon Technologies AG | Magnetic Field Sensor RoHS : Compliant |
| 671,317 | ||
| TLE49452LHALA1 | Infineon Technologies AG | Hall Effect Sensor RoHS : Compliant |
| 397 | ||
| TLE4945LHALA1 | Infineon Technologies AG | Hall Effect Sensor, -10mT Min, 10mT Max, Rectangular, 3 Pin, Through Hole Mount RoHS : Compliant |
| 31,640 | ||
| A4945GLJTR-T | Allegro MicroSystems LLC | AC Motor Controller, 1.8A, PDSO8 RoHS : Compliant |
| 100 | ||
CY2149-45PC![]() | Cypress Semiconductor | Standard SRAM, 1KX4, 45ns PDIP18 RoHS : Not Compliant |
| 383 | ||
| MAX4945AELA+ | Maxim Integrated Products | Buffer/Inverter Based Peripheral Driver, BICMOS, PDSO8 RoHS : Compliant |
| 67,652 | ||
MAX4945AELA+T![]() | Maxim Integrated Products | Buffer/Inverter Based Peripheral Driver, BICMOS, PDSO8 RoHS : Compliant |
| 189,405 | ||
| MAX4945ELA+ | Maxim Integrated Products | Buffer/Inverter Based Peripheral Driver, BICMOS, PDSO8 RoHS : Compliant |
| 19,852 | ||
MAX4945ELA+T![]() | Maxim Integrated Products | Buffer/Inverter Based Peripheral Driver, BICMOS, PDSO8 RoHS : Compliant |
| 2,500 | ||
| MAX4945LELA+ | Maxim Integrated Products | Buffer/Inverter Based Peripheral Driver, BICMOS, PDSO8 RoHS : Compliant |
| 11,371 | ||
| LM49450SQ | National Semiconductor Corporation | 1.2W, 2 Channel(s), 1 Func RoHS : Not Compliant |
| 425 | ||
![]() Sager | 2904945![]() | Phoenix Contact | DIN Rail Power Supplies STEP-PS/277AC/ 24DC/3.5 RoHS : Compliant |
| 8 | |
| 8-146494-5 | TE Connectivity | Headers & Wire Housings 70 MODII HDR DRST UNSHRD STKG RoHS : Compliant | 0 | |||
| 2494561-2 | TE Connectivity | HD1400 BLIND PLUG GEN2 NO SHIELD TOOL RoHS : Compliant |
| 0 | ||
| 468-34945-001 | Carling Technologies | Rocker Switches | 0 | |||
| 494577-E | TE Connectivity | M12 M 4 B H S * 201 17,0 094 * * * 9999 RoHS : Compliant |
| 0 | ||
| 54945BEUB | ABB Group | 54945BE 90 DEGREE BEND |
| 0 | ||
| 2494574-1 | TE Connectivity | HD1000 BLIND PLUG GEN2 NO SHIELD FINGER RoHS : Compliant |
| 0 | ||
| K1149458 | TE Connectivity | ROTARY SWITCH DS-111-GE1 RoHS : Compliant |
| 0 | ||
| 8-2151494-5 | TE Connectivity | Bench Top Tools OC-PMC-AT-PA-S-F-S | 0 | |||
| 704.945.2 | EAO AG | ENCLOSURE, 130 MM X 94 MM X 81 MM, PLASTIC, GREY RoHS : Compliant |
| 0 | ||
| 0824945 | Phoenix Contact | Terminal Block Tools & Accessories ZB 15 CUS 1 strip is 1 piece RoHS : Compliant |
| 0 | ||
| 554945-1 | TE Connectivity | D-Sub Backshells 180 COVER KIT 36P RoHS : Compliant | 0 | |||
| 1714945 | Phoenix Contact | Board to Board & Mezzanine Connectors FP 1,27/ 80-MV 1,75 RoHS : Compliant | 0 | |||
| 1494553 | Phoenix Contact | SAC-5P- 45 0-PUR/M12FS BK | 0 | |||
| LELK1-1REC4-33494-501-R1-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
![]() TME | 095-666-44945 | Amphenol Corporation | Cable |
| 98 | |
| BM0314945 | BM Group spa | Tip: ring tube; M12; 95mm2; crimped; for cable; angled 45°; tinned |
| 62 | ||
| 14945/SP | Bulgin | Tool: for removal; terminals; Buccaneer 6000,Buccaneer 7000 |
| 21 | ||
| 10049454 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 16; SMT; 3A; 250V; 2x8 |
| 0 | ||
| 10049456 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 16; SMT; 3A; 250V; 2x8 |
| 0 | ||
| 2494560000 | Weidmüller Interface GmbH & Co. KG | Connector: HDC; female; crimped; 10÷8mm2 RoHS : Compliant |
| 0 | ||
| 449452 | Elesa+Ganter | Transport wheel; Ø: 150mm; W: 56mm; hub with ball bearings; 463kg |
| 0 | ||
| 10049455 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 16; SMT; 3A; 250V; 2x8 |
| 0 | ||
| 2649450000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; CH; 15A; 630V; angled 90° |
| 0 | ||
| 449451 | Elesa+Ganter | Transport wheel; Ø: 125mm; W: 56mm; hub with ball bearings; 407kg |
| 0 | ||
| 10049457 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 16; SMT; 3A; 250V; 2x8 |
| 0 | ||
| 449453 | Elesa+Ganter | Transport wheel; Ø: 200mm; W: 56mm; hub with ball bearings; 662kg |
| 0 | ||
| 10049458 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 16; SMT; 3A; 250V; 2x8 |
| 0 | ||
| 7000-13161-3494500 | Murrelektronik GmbH | Cable: for sensors; PIN: 5; M12 male; angled; 45m; plug; 60VDC; 50VAC RoHS : Compliant |
| 0 | ||
| 449.45 | Proctor & Gamble | File; needle; round; Working part len: 200mm; 12pcs; Ø: 4mm |
| 0 | ||
![]() Ameya Holding Limited | LM49450SQ/NOPB![]() | Texas Instruments | LM49450SQ/NOPB D 类 立体声 音频放大器, +85 °C, 32引脚 LLP封装 RoHS : Compliant | 27,475 | ||
LM49450SQX/NOPB![]() | Texas Instruments | IC AUDIO SUBSYSTEM 2.5W D 32LLP RoHS : Compliant | 24,356 | |||
![]() ComSIT USA | TLE49452G | Infineon Technologies AG | BIPOLAR HALL IC SWITCH FOR MAGNETIC FIELD APPLICATION Analog Circuit, 1 Func, BIPolar, PSSO3 RoHS : Not Compliant | 2,328 | ||
![]() Interstate Connecting Components | 249-4501-000 | ITT Interconnect Solutions | DL ONE PIECE METAL B ACK SHELL |
| 138 | |
| 249-4517-000 | ITT Interconnect Solutions | DL METAL BACK SHELL |
| 0 | ||
| 2494561-2 | TE Connectivity | HD1400 BLIND PLUG GEN2 NO SHIE RoHS : Compliant | 0 | |||
| 494577-E | TE Connectivity | M12 MALE. B CODE, 4P, 17MM SMT RoHS : Compliant | 0 | |||
| 10-522494-56P | Amphenol Aerospace | 22992 CONN |
| 0 | ||
| 2494574-1 | TE Connectivity | HD1000 BLIND PLUG GEN2 NO SHIE RoHS : Compliant | 0 | |||
| 10-522494-56S | Amphenol Aerospace | 22992 CONN |
| 0 | ||
| 5-1879494-5 | TE Connectivity | CRGH0603 5% 180R 0.2W RoHS : Compliant |
| 0 | ||
| M85049/45A10 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Compliant |
| 0 | ||
| M85049/45W18 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S |
| 0 | ||
| K1149458 | TE Connectivity | Rotary Switch DS-111-GE1 RoHS : Compliant |
| 0 | ||
| M85049/45A22 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Compliant |
| 0 | ||
| M85049/45Z18 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S | 0 | |||
| 10-494596-139 | Amphenol Aerospace | 0 | ||||
| 2CMA104945R1000 | Amphenol Sine Systems | ABB430B9E PANEL MOUNTED INLET | 0 | |||
![]() PEI Genesis | 249-4517-000 | ITT Interconnect Solutions |
| 430 | ||
| 249-4501-000 | ITT Interconnect Solutions |
| 0 | |||
| 573H534-9-450 | HellermannTyton |
| 0 | |||
| M85049/45A10 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/45W18 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/45A22 | SOURIAU-SUNBANK |
| 0 | |||
| 313C764-9-450 | HellermannTyton |
| 0 | |||
| 313F364-9-450 | HellermannTyton |
| 0 | |||
| M85049/45W22 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/45W10 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/45W12 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/45A12 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/45W8 | SOURIAU-SUNBANK |
| 0 | |||
| 313C774-9-450 | HellermannTyton |
| 0 | |||
| 249-4518-000 | ITT Interconnect Solutions |
| 0 | |||
![]() Powell Electronics | 34945 | TE Connectivity | SPLICE,PG BUTT 12-10 RoHS : Compliant |
| 3,960 | |
| 81044/12-24-945 | TE Connectivity | Connectors RoHS : Compliant |
| 891 | ||
| 5536494-5 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 358 | ||
| 50084945-05 | Honeywell Sensing and Control | Switch |
| 263 | ||
| 095-666-44945 | Amphenol RF | RF Connector |
| 65 | ||
| M85049/45Z24 | Glenair Inc | ACCESSORIES - STRAIN RELIEF/CLAMPS |
| 25 | ||
| M85049/45Z20 | Glenair Inc | ACCESSORIES - STRAIN RELIEF/CLAMPS |
| 22 | ||
| 10-584945-2P | Amphenol Corporation | CONNECTOR |
| 21 | ||
| M85049/45Z18 | Glenair Inc | ACCESSORIES - STRAIN RELIEF/CLAMPS |
| 21 | ||
| M85049/45Z14 | Glenair Inc | ACCESSORIES - STRAIN RELIEF/CLAMPS |
| 17 | ||
| M85049/45Z16 | Glenair Inc | ACCESSORIES - STRAIN RELIEF/CLAMPS |
| 17 | ||
| M85049/45Z10 | Glenair Inc | ACCESSORIES - STRAIN RELIEF/CLAMPS |
| 15 | ||
| 10-584945-2S | Amphenol Corporation | CONNECTOR |
| 14 | ||
| M85049/45Z12 | Glenair Inc | ACCESSORIES - STRAIN RELIEF/CLAMPS |
| 14 | ||
| 449453-000 | TE Connectivity | Data Bus Components RoHS : Compliant |
| 2 | ||
![]() Richardson RFPD | ADA4945-1ACPZ-RL | Analog Devices Inc | SP Amp DIFF AMP Single R-R O/P 10V 16-Pin LFCSP EP RoHS : Compliant |
| 0 | |
| 935360494557 | NXP Semiconductors | SOC i.MX 6SoloLite ARMCortex A9 40nm 432-Pin MAP-B RoHS : Compliant | 0 | |||
| ADA4945-1ACPZ-R2 | Analog Devices Inc | SP Amp DIFF AMP Single R-R O/P 10V 16-Pin LFCSP EP RoHS : Compliant |
| 0 | ||
| ADA4945-1ACPZ-R7 | Analog Devices Inc | SP Amp DIFF AMP Single R-R O/P 10V 16-Pin LFCSP EP RoHS : Compliant |
| 0 | ||
| 22649458 | HUBER+SUHNER | Conn SMA-SMA Adapter 0Hz to 18GHz 50Ohm ST PL/F Go RoHS : Compliant |
| 0 | ||
| ADA4945-1CP-EBZ | Analog Devices Inc | ADA4945-1 Special Purpose Amplifier Evaluation Boa RoHS : Compliant |
| 0 | ||
| SI5332BD14945-GM2R | Skyworks Solutions Inc | Frequency Synthesis Clock Generator RoHS : Compliant | 0 | |||
| 935384494598 | NXP Semiconductors | Trans RF MOSFET N-CH 133V | 0 | |||
| SI5332BD14945-GM2 | Skyworks Solutions Inc | Frequency Synthesis Clock Generator RoHS : Compliant | 0 | |||
| 1-745494-5 | TE Connectivity | Conn D-Sub PIN 15 POS 1.37mm IDT STCable Mount 15 RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 49456-1047 | Molex | INSTOCK | 93,600 | ||
| 494543-E | ERNI | INSTOCK | 30,056 | |||
| TLE4945-2L | Infineon Technologies AG | INSTOCK RoHS : Compliant | 20,000 | |||
| 49456-1217 | Molex | INSTOCK | 10,920 | |||
| 449453-000 | TE Connectivity | INSTOCK RoHS : Compliant | 2,762 | |||
| U4945 | INSTOCK | 450 | ||||
| G494565-455 | INSTOCK | 200 | ||||
| 8044945- | INSTOCK | 200 | ||||
| G494565-462 | INSTOCK | 35 | ||||
![]() Avnet Abacus | 249-4520-000 | ITT Interconnect Solutions | BACKSHELL DL1156 ROHS (Alt: 249-4520-000) RoHS : Compliant | 600 | ||
| 1804945 | Phoenix Contact | FKMCP 15 2ST381 GYBD22Q FKMCP152ST381GYBD22Q (Alt: 1804945) RoHS : Compliant | 0 | |||
| 0824945 | Phoenix Contact | ZB 15 CUS ZB15CUS (Alt: 0824945) RoHS : Compliant | 0 | |||
| 15494583 | Aptiv PLC | (Alt: 15494583) RoHS : Compliant | 0 | |||
| K1149458 | TE Connectivity | (Alt: K1149458) RoHS : Compliant | 0 | |||
| 554945-1 | TE Connectivity | Connector Accessories Cover Kit Thermoplastic 36 POS (Alt: 554945-1) RoHS : Compliant | 0 | |||
| 15494598 | Aptiv PLC | (Alt: 15494598) RoHS : Compliant | 0 | |||
| 14945/SP | Bulgin | TOOL INSERTEXTRACT FOR SA3544 (Alt: 14945/SP) RoHS : Compliant | 0 | |||
| 494561617 | Molex | - Tape and Reel (Alt: 494561617) RoHS : Compliant | 0 | |||
| 8-146494-5 | TE Connectivity | (Alt: 8-146494-5) RoHS : Compliant | 0 | |||
| 1494560000 | Weidmüller Interface GmbH & Co. KG | Conn Terminal Block 6 POS 762mm Solder ST ThruHole 30A Box (Alt: 1494560000) RoHS : Compliant | 0 | |||
744945-001![]() | TE Connectivity | (Alt: 744945-001) RoHS : Compliant | 0 | |||
| 494511-000 | TE Connectivity | (Alt: 494511-000) RoHS : Compliant | 0 | |||
| 249-4517-000 | ITT Interconnect Solutions | Connector Accessories Metal Backshell Nickel Over Die Cast Aluminum (Alt: 249-4517-000) RoHS : Not Compliant | 0 | |||
| 249-4501-000 | ITT Interconnect Solutions | Connector Accessories Metal Backshell Nickel Over Die Cast Aluminum (Alt: 249-4501-000) RoHS : Compliant | 0 | |||
![]() Avnet Asia | SLG4AD49454V | Renesas Electronics Corporation | SM (B) PROGRAMMED DEVICE, SPU4 IFE CONTROL GREENPAK LOGIC, 18-5589-01 (Alt: SLG4AD49454V) RoHS : Compliant | 0 | ||
| SLG4AD49452V | Renesas Electronics Corporation | SM (B) PROGRAMMED DEVICE, SPU4 IFE CONTROL GREENPAK LOGIC, 18-5589-01 (Alt: SLG4AD49452V) RoHS : Compliant | 0 | |||
| SLG4AD49455V | Renesas Electronics Corporation | SM (B) PROGRAMMED DEVICE, SPU4 IFE CONTROL GREENPAK LOGIC, (Alt: SLG4AD49455V) RoHS : Compliant | 0 | |||
| SLG4AD49453V | Renesas Electronics Corporation | SM (B) PROGRAMMED DEVICE, SPU4 IFE CONTROL GREENPAK LOGIC, 18-5589-01 (Alt: SLG4AD49453V) RoHS : Compliant | 0 | |||
| 249-4520-000 | ITT Interconnect Solutions | (Alt: 249-4520-000) RoHS : Compliant | 0 | |||
| 34945 | TE Connectivity | (Alt: 34945) RoHS : Compliant | 0 | |||
| ASP-214945-01 | Samtec Inc | 1MM TIGER CLAW RUGGED SOCKET STRIP (Alt: ASP-214945-01) RoHS : Compliant | 0 | |||
![]() Avnet Silica | BD4945G-TR![]() | ROHM Semiconductor | (Alt: BD4945G-TR) RoHS : Compliant | 0 | ||
![]() Component Electronics, Inc | 34945 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 214 | |
| 494-5025-004 | Teradyne Inc | IN STOCK SHIP TODAY | 71 | |||
| 554945-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 12 | ||
| 4945-WHITE-1X36YD-SMPK | 3M | IN STOCK SHIP TODAY |
| 5 | ||
| 4945-K-24 | Pomona Electronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
![]() DB Roberts | 14945 | Heyco | BRASS CGHT PG7-050X6MMTHD | 0 | ||
| 4945-12 | HeliCoil | 0 | ||||
| 4945-10 | HeliCoil | 0 | ||||
![]() Flip Electronics | PCGA49451F | onsemi | Stock, Ship Today | 2,285 | ||
![]() Master Electronics | 249-4517-000 | ITT Interconnect Solutions | Connector Accessory - 0.75in Max Cable Dia - Backshell - Aluminum Alloy RoHS : Compliant |
| 129 | |
| RCV-00114945 | Carling Technologies | VVG8CUB100 RoHS : Compliant |
| 0 | ||
| 8-146494-5 | TE Connectivity | 70 MODII HDR DRST UNSHRD STKG MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2494561-2 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| 494577-E | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 54945BEUB | Thomas & Betts | Copper One-Hole Lug - 90 Degree Bend Long Barrel - Blind End - #1 AWG - Tin Plated - Green RoHS : Compliant |
| 0 | ||
| 54945BEUBPH | Thomas & Betts | Copper One-Hole Lug - 90 Degree Bend Long Barrel - Peep Hole - #1 AWG - Tin Plated - Green RoHS : Compliant |
| 0 | ||
| 2494574-1 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| 64945 | TE Connectivity | 64945 RoHS : Compliant |
| 0 | ||
| 5-1879494-5 | TE Connectivity | CRGH0603 5% 180R 0.2W RoHS : Compliant |
| 0 | ||
| 33124945 | Aptiv Services Deutschland GmbH - Werk Neumarkt | CTS 0.5 Locking Lance Unsealed Terminal Cross Sec (0.17 - 0.35 mm²) RoHS : Compliant |
| 0 | ||
| K1149458 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| K1149458 | TE Connectivity | Rotary Switch DS-111-GE1 MOQ Reduction RoHS : Compliant |
| 0 | ||
744945-001![]() | TE Connectivity | CES-5 RoHS : Compliant |
| 0 | ||
| 0824945 | Phoenix Contact | Zack marker strip - can be ordered: Strip - white - labeled according to customer specifications - mounting type: snap into tall marker groove - for terminal block width: 15.2 mm - lettering field size: 10.5 x 15.1 mm - Number of individual labels: 5 RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3FCA494-5M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: FC, Connector 1 Polish Type: APC, Connector 2 Series: FC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex FC APC, NK to FC UPC, NK, SM OS2, 2.0mm Riser, Yellow-5M. Pasternack’s PE3FCA494-5M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long simplex cable assembly is equipped with FC/APC narrow key to FC/UPC narrow key connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA494-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA494-5M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of simplex FC/APC to FC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 1 | |
| PE3W14945LF | Pasternack Enterprises | Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. NEX10 Male to QMA Male Right Angle Cable Using TFT-5G-402 Coax, LF Solder. PE3W14945LF is a NEX10 male to QMA male right angle cable using TFT-5G-402 coax. This Pasternack NEX10 male to QMA male right angle cable assembly uses a 50 Ohm NEX10 for connector 1 and a 50 Ohm QMA for connector 2. NEX10 to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male NEX10 to male QMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14945LF NEX10 male to QMA male right angle cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE34945/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to Reverse Polarity TNC Male Cable Using RG58 Coax with HeatShrink. PE34945/HS is a reverse polarity TNC male to reverse polarity TNC male cable using RG58 coax. This Pasternack reverse polarity TNC male to reverse polarity TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity male TNC to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34945/HS TNC reverse polarity male to TNC reverse polarity male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W04945/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to SMC Jack Cable Using RG188-DS Coax with HeatShrink. PE3W04945/HS is a reverse polarity SMA male to SMC jack cable using RG188-DS coax. This Pasternack reverse polarity SMA male to SMC jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMC for connector 2. Our reverse polarity male SMA to jack SMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04945/HS SMA reverse polarity male to SMC jack cable assembly is constructed with RG188-DS coax. | 0 | |||
| PE3C4945-66 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to N Male Cable 6 Inch Length Using RG316 Coax., Pasternack’s PE3C4945-66 BMA plug bulkhead to type N male RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BMA plug to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA bulkhead cable connection on one end and a type N cable connection on the other. Our BMA to type N cable assembly has a plug gender on end 1 and a male on end 2. PE3C4945-66 can also be known as a BMA male to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.8-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. BMA to type N cable from Pasternack is ideal for applications including bma cable rf backplanes, blind mate bma test, rack and panel, phased array interconnects and high speed switching networks. Our PE3C4945-66 RF cable has an FEP jacket of 0.098-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. Our bulkhead BMA plug to type N male cable has a maximum VSWR of 1.4:1. This PE3C4945-66 BMA male to type N plug cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C4945-66 can also be used in the other direction and will be a type N male to BMA plug bulkhead cable assembly if the opposite connectivity is required. This BMA male bulkhead to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to type N cable assembly for quick shipment worldwide. Variations of BMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W14945-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. NEX10 Male to QMA Male Right Angle Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax with Times Microwave Components., Radio frequency assembly NEX10 male to QMA male right angle low PIM cable 24 inch length using TFT-5G-402 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to QMA male right angle low PIM cable 24 inch length using TFT-5G-402 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a right angle QMA cable connection on the other. Our low PIM NEX10 to right angle QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W14945-24 can also be known as a low PIM NEX10 plug to right angle QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3W14945-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to right angle QMA male cable has a maximum VSWR of 1.4:1. NEX10 plug to QMA plug cable assembly PE3W14945-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to right angle QMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W14945-24 can also be used in the other direction and will be a right angle QMA male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to QMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to QMA cable assembly for quick shipment worldwide. Variations of NEX10 and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to QMA low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C4945 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to N Male Cable Using RG316 Coax., Radio frequency assembly slide-on BMA plug bulkhead to N male cable using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to N male cable using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and type N cable connection on the other. Our BMA to type N cable assemblies have a plug gender on end 1 and male on end 2. This BMA to type N cable is a plug to male coax assembly, PE3C4945, can also be known as a BMA male to N type plug cable assembly and will be shipped same-day as it is purchased. BMA male to type N plug cable assembly PE3C4945 is built with RG316 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BMA plug bulkhead to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4945 can also be used in the other direction and will be type N male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to type N cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to N male cable using RG316 coax. | 0 | |||
| PE3W14945 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. NEX10 Male to QMA Male Right Angle Low PIM Cable Using TFT-5G-402 Coax with Times Microwave Components., Radio frequency assembly NEX10 male to QMA male right angle low PIM cable using TFT-5G-402 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to QMA male right angle low PIM cable using TFT-5G-402 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a right angle QMA cable connection on the other. Our low PIM NEX10 to right angle QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W14945 can also be known as a low PIM NEX10 plug to right angle QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3W14945 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to right angle QMA male cable has a maximum VSWR of 1.4:1. NEX10 plug to QMA plug cable assembly PE3W14945 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to right angle QMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W14945 can also be used in the other direction and will be a right angle QMA male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to QMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to QMA cable assembly for quick shipment worldwide. Variations of NEX10 and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to QMA low PIM RF cable assembly as per your requirements. | 0 | |||
| PE34945LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to Reverse Polarity TNC Male Cable Using RG58 Coax with HeatShrink, LF Solder. PE34945LF/HS is a reverse polarity TNC male to reverse polarity TNC male cable using RG58 coax. This Pasternack reverse polarity TNC male to reverse polarity TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity male TNC to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34945LF/HS TNC reverse polarity male to TNC reverse polarity male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W14945-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. NEX10 Male to QMA Male Right Angle Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax with Times Microwave Components., Radio frequency assembly NEX10 male to QMA male right angle low PIM cable 36 inch length using TFT-5G-402 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to QMA male right angle low PIM cable 36 inch length using TFT-5G-402 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a right angle QMA cable connection on the other. Our low PIM NEX10 to right angle QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W14945-36 can also be known as a low PIM NEX10 plug to right angle QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3W14945-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to right angle QMA male cable has a maximum VSWR of 1.4:1. NEX10 plug to QMA plug cable assembly PE3W14945-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to right angle QMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W14945-36 can also be used in the other direction and will be a right angle QMA male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to QMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to QMA cable assembly for quick shipment worldwide. Variations of NEX10 and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to QMA low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C4945-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 36 inches. Slide-On BMA Plug Bulkhead to N Male Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly slide-on BMA plug bulkhead to N male cable 36 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to N male cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and type N cable connection on the other. Our BMA to N type cable assemblies have a plug gender on end 1 and male on end 2. This BMA to N type cable is a plug to male coax assembly, PE3C4945-36, can also be known as a BMA male to type N plug cable assembly and will be shipped same-day as it is purchased. BMA male to type N plug cable assembly PE3C4945-36 is built with RG316 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BMA plug bulkhead to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4945-36 can also be used in the other direction and will be type N male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to type N cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to N male cable 36 inch length using RG316 coax. |
| 0 | ||
| PE3W14945-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. NEX10 Male to QMA Male Right Angle Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax with Times Microwave Components., Radio frequency assembly NEX10 male to QMA male right angle low PIM cable 60 inch length using TFT-5G-402 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to QMA male right angle low PIM cable 60 inch length using TFT-5G-402 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a right angle QMA cable connection on the other. Our low PIM NEX10 to right angle QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W14945-60 can also be known as a low PIM NEX10 plug to right angle QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3W14945-60 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to right angle QMA male cable has a maximum VSWR of 1.4:1. NEX10 plug to QMA plug cable assembly PE3W14945-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to right angle QMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W14945-60 can also be used in the other direction and will be a right angle QMA male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to QMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to QMA cable assembly for quick shipment worldwide. Variations of NEX10 and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to QMA low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W24945/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SSMA Male to BNC Female Bulkhead Cable Using RG188 Coax with HeatShrink. PE3W24945/HS is a SSMA male to BNC female bulkhead cable using RG188 coax. This Pasternack SSMA male to BNC female bulkhead cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SSMA to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24945/HS SSMA male to BNC female bulkhead cable assembly is constructed with RG188 coax. | 0 | |||
| PE3C4945-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 6 inches. Slide-On BMA Plug Bulkhead to N Male Cable 6 Inch Length Using RG316 Coax., Radio frequency assembly slide-on BMA plug bulkhead to N male cable 6 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to N male cable 6 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and type N cable connection on the other. Our BMA to N type cable assemblies have a plug gender on end 1 and male on end 2. This BMA to type N cable is a plug to male coax assembly, PE3C4945-6, can also be known as a BMA male to N type plug cable assembly and will be shipped same-day as it is purchased. BMA male to type N plug cable assembly PE3C4945-6 is built with RG316 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BMA plug bulkhead to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4945-6 can also be used in the other direction and will be N type male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to type N cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to N male cable 6 inch length using RG316 coax. |
| 0 | ||
| PE3W14945-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. NEX10 Male to QMA Male Right Angle Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax with Times Microwave Components., Radio frequency assembly NEX10 male to QMA male right angle low PIM cable 12 inch length using TFT-5G-402 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to QMA male right angle low PIM cable 12 inch length using TFT-5G-402 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a right angle QMA cable connection on the other. Our low PIM NEX10 to right angle QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W14945-12 can also be known as a low PIM NEX10 plug to right angle QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3W14945-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to right angle QMA male cable has a maximum VSWR of 1.4:1. NEX10 plug to QMA plug cable assembly PE3W14945-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to right angle QMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W14945-12 can also be used in the other direction and will be a right angle QMA male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to QMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to QMA cable assembly for quick shipment worldwide. Variations of NEX10 and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to QMA low PIM RF cable assembly as per your requirements. |
| 0 | ||
![]() Vyrian | MAX14945EWE | Analog Devices (Maxim Integrated) | 11,697 | |||
| MAX4945AELA+T | Analog Devices Inc | Buffer/Inverter Based Peripheral Driver, BICMOS, PDSO8 RoHS : Compliant | 11,646 | |||
| MAX14945EWE+ | Analog Devices Inc | Line Transceiver RoHS : Compliant | 10,484 | |||
| MAX14945EWE+T | Analog Devices Inc | Line Transceiver RoHS : Compliant | 10,202 | |||
| MAX4945LELA+T | Analog Devices Inc | Buffer/Inverter Based Peripheral Driver, BICMOS, PDSO8 RoHS : Compliant | 9,341 | |||
| MAX4945ELA-TG50 | Analog Devices (Maxim Integrated) | 9,253 | ||||
| MAX14945EWE-T | Analog Devices (Maxim Integrated) | 7,243 | ||||
| MAX4945AELA-TG104 | Analog Devices (Maxim Integrated) | 7,073 | ||||
| MAX4945AELA+ | Analog Devices Inc | Buffer/Inverter Based Peripheral Driver, BICMOS, PDSO8 RoHS : Compliant | 6,949 | |||
| MAX4945LELA-T | Analog Devices (Maxim Integrated) | 6,669 | ||||
| MAX4945BELA-T | Analog Devices (Maxim Integrated) | 6,116 | ||||
| MAX4945ELA-T | Analog Devices (Maxim Integrated) | 6,037 | ||||
| MAX4945ELA | Analog Devices (Maxim Integrated) | 5,489 | ||||
| MAX4945LELA+ | Analog Devices Inc | Buffer/Inverter Based Peripheral Driver, BICMOS, PDSO8 RoHS : Compliant | 5,282 | |||
| MAX4945AELA-T | Analog Devices (Maxim Integrated) | 5,266 | ||||
![]() Waytek, Inc. | 49452 | Dynatex International | Boltlocker High Strength Red 24 ML Dynatex |
| 32 | |
| 149452-10 | General Cable Technologies Corporation | 2 GA SGX Red Cross-Link Bare Copper Battery Cable -51C to 125C 133/23 Stranding |
| 0 | ||
![]() Win Source Electronics | TLE4945L | Infineon Technologies AG | Uni- and Bipolar Hall IC Switches for Magnetic Field Applications | MAGNETIC SWITCH BIPOLAR PSSO-3-2 RoHS : Compliant |
| 72,000 | |
| TLE4945LHALA1 | Infineon Technologies AG | MAGNETIC SWITCH BIPOLAR 3SSO RoHS : Compliant |
| 42,000 | ||
TLE4945-2G![]() | Infineon Technologies AG | Hall Effect Sensor 100mA Bipolar 5V/9V/12V/15V/18V Automotive 4-Pin(3+Tab) SOT-89 / MAGNETIC SWITCH BIPOLAR SOT89-3 RoHS : Compliant |
| 40,000 | ||
| LM49450SQ | National Semiconductor Corporation | AUDIO AMPLIFIER, 1.2W, 2 CHANNEL RoHS : Not Compliant |
| 12,321 | ||
| MAX4945LELA+TG104 | Maxim Integrated Products | INTEGRATED CIRCUIT |
| 10,330 | ||
| TLE4945-2L | Infineon Technologies AG | MAGNETIC SWITCH BIPOLAR PSSO-3-2 RoHS : Compliant |
| 10,000 | ||
| TLE49452LHALA1 | Infineon Technologies AG | MAGNETIC SWITCH BIPOLAR 3SSO RoHS : Compliant |
| 9,120 | ||
LM49450SQ/NOPB![]() | Texas Instruments | Boomer I2S Input, 2.5W/Channel, Low EMI, Stereo, Class D Audio Sub-System with Ground Referenced Headphone Amplifier, 3D Enhancement, and Headphone Sense | IC AUDIO SUBSYSTEM 2.5W D 32WQFN RoHS : Compliant |
| 7,827 | ||
| MAX4945AELA+ | Maxim Integrated Products | MAX4945 OVERVOLTAGE-PROTECTION C / Overvoltage Protection Controller PMIC 8-μDFN (2x2) RoHS : Compliant |
| 7,703 | ||
MAX4945AELA+T![]() | Maxim Integrated Products | IC CTLR OVP W/FET 5.80V 8-UDFN RoHS : Compliant |
| 6,910 | ||
| ADA4945-1ACPZ | Analog Devices Inc | ADI Differential Precision ADC Driver |
| 5,414 | ||
| ADA4945-1ACPZ-R2 | Analog Devices Inc | IC ADC DRIVER 16LFCSP / ADC Driver IC Data Acquisition 16-LFCSP (3x3) RoHS : Compliant |
| 5,160 | ||
| ADA4945-1ACPZ-R7 | Analog Devices Inc | IC ADC DRIVER 16LFCSP RoHS : Compliant |
| 4,970 | ||
| ADA4945-1ACPZ-RL | Analog Devices Inc | IC ADC DRIVER 16LFCSP RoHS : Compliant |
| 4,950 | ||
MAX4945LELA+T![]() | Maxim Integrated Products | IC CTLR OVP W/FET 5.80V 8-UDFN RoHS : Compliant |
| 2,882 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |