| Electronic Components Datasheet Search |
|
4905 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Master Electronics | 54905BEUFPH-1 | Thomas & Betts | LNG BAR NO.6 1/4 BH 45DEG RoHS : Compliant |
| 0 | |
| HTSW-149-05-L-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-149-05-L-T-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-149-05-LM-S-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-49-05-F-D-280-157 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-49-05-F-D-400-188 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-49-05-L-D-330-100 | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| MTMM-149-05-F-Q-150 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-149-05-T-D-030 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CA1-B0-34-490-522-I | Carling Technologies | CA1B034490522I RoHS : Compliant |
| 0 | ||
| ERM8-049-05.0-S-DV-DS-TR | Samtec Inc | 0.80 mm Edge Rate® Rugged High-Speed Terminal Strip RoHS : Compliant |
| 0 | ||
| FW-49-05-F-D-275-157 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-49-05-F-D-440-188 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-49-05-L-D-325-100 | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-49-05-L-D-350-100 | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
![]() Verical | 49050C | Myrra | AC/DC Power Supply Single-OUT 5V 1A 5W |
| 195 | |
| 490543-000 | TE Connectivity | Heat Shrink Transition T Style Fluid Resistant Modified Elastomer Black RoHS : Compliant |
| 66 | ||
| 49050G | Myrra | 49050G |
| 11 | ||
| 490543-000 | TE Connectivity | Heat Shrink Transition T Style Fluid Resistant Modified Elastomer Black RoHS : Compliant |
| 10 | ||
![]() Avnet Americas | IRF4905PBF | Infineon Technologies AG | - Rail/Tube (Alt: IRF4905PBF) RoHS : Compliant |
| 14,226 | |
| IRF4905STRLPBF | Infineon Technologies AG | - Product that comes on tape, but is not reeled (Alt: 40M7917) RoHS : Compliant |
| 0 | ||
| 4905 | 3M Interconnect | 4905 - Cable Rools/Shrink Tubing (Alt: 7000123596) RoHS : Not Compliant |
| 0 | ||
| 4905 | 3M Interconnect | 4905 - Cable Rools/Shrink Tubing (Alt: 7000123504) RoHS : Not Compliant |
| 0 | ||
| PI6C49053AIEX | Diodes Incorporated | - Tape and Reel (Alt: PI6C49053AIEX) RoHS : Compliant | 0 | |||
| RN4905FE,LF(CT | Toshiba America Electronic Components | - Tape and Reel (Alt: RN4905FE,LF(CT) RoHS : Compliant |
| 0 | ||
| ERM8-049-05.0-S-DV-DS-TR | Samtec Inc | Mezzanine Connector, Header, 0.8 mm, 2 Rows, 98 Contacts, Surface Mount, Phosphor Bronze - Tape and Reel (Alt: ERM8-049-05.0-S-DV-DS-TR) RoHS : Compliant |
| 0 | ||
| 684905-1 | TE Connectivity | - Bag (Alt: 684905-1) RoHS : Compliant |
| 0 | ||
| CA121004-905 | ITT Interconnect Solutions | - Bulk (Alt: CA121004-905) RoHS : Not Compliant |
| 0 | ||
| 057-8749-052 | ITT Interconnect Solutions | - Bulk (Alt: 057-8749-052) RoHS : Not Compliant |
| 0 | ||
| ERM8-049-05.0-L-DV-DS-L-P-TR | Samtec Inc | Mezzanine Connector, Header, 0.8 mm, 2 Rows, 98 Contacts, Straight, Solder, Surface Mount - Tape and Reel (Alt: ERM8-049-05.0-L-DV-DS-L-P-TR) RoHS : Compliant |
| 0 | ||
| MIC3490-5.0YM5-TR | Microchip Technology Inc | High Input Voltage LDO Regulator 5V 5-Pin SOT-23 T/R - Tape and Reel (Alt: MIC3490-5.0YM5-TR) RoHS : Compliant |
| 0 | ||
| RN4905,LXHF(CT | Toshiba America Electronic Components | Transistor Digital BJT PNP/NPN 50V 100mA 6-Pin SOT-363 - Tape and Reel (Alt: RN4905,LXHF(CT) RoHS : Compliant | 0 | |||
| 7010364905 | 3M Interconnect | MULTI-FINISHING CONVOLUTE WHEEL, MU-WL, - Bulk (Alt: 7010364905) RoHS : Not Compliant |
| 0 | ||
| ERF8-049-05.0-S-DV-L-TR | Samtec Inc | Mezzanine Connector, Receptacle, 0.8 mm, 2 Rows, 98 Contacts, Straight, Solder, Surface Mount - Tape and Reel (Alt: ERF8-049-05.0-S-DV-L-TR) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | 1-2490541-2 | TE Connectivity | Cable Glands, Strain Reliefs & Cord Grips VENTILATION GLAND,PA6,PG9,4-8,8,BLK RoHS : Compliant |
| 600 | |
| 2490541-2 | TE Connectivity | Cable Glands, Strain Reliefs & Cord Grips VENTILATION GLAND,PA6,M12,4-8,8,LGR RoHS : Compliant |
| 598 | ||
| 1-2490541-0 | TE Connectivity | Cable Glands, Strain Reliefs & Cord Grips VENTILATION GLAND,PA6,PG9,4-8,8,GRY RoHS : Compliant |
| 595 | ||
| 4905 | Keystone Electronics Corp | Terminals QUICK FIT TERMINAL RoHS : Compliant |
| 164 | ||
| CFM-8025BG-490-592-20 | Same Sky | DC Fans dc axial fan, 80 mm square, 25 mm, 48 Vdc, ball, 9000 RPM, 95 CFM, TS RoHS : Compliant |
| 76 | ||
| CFM-8038BF-490-551-20 | Same Sky | DC Fans dc axial fan, 80 mm square, 38 mm, 48 Vdc, ball, 9000 RPM, 68.96 CFM, TS RoHS : Compliant |
| 56 | ||
| 4905 | Adafruit Industries | Raspberry Pi Hats / Add-on Boards 40-pin FPC to Straight 2x20 IDC Female Socket Header RoHS : Compliant |
| 39 | ||
| MHODB24490507NM-IP | Amphenol PCTEL | Antennas 2.4-2.5/4.94-5.925 GHZ DUAL BAND OMNI, N MALE, SEALED ANTENNA RoHS : Compliant |
| 25 | ||
| MMSD-04-22C-L-48.50-S-K | Samtec Inc | Rectangular Cable Assemblies Mini-Mate Cable Assembly |
| 0 | ||
| 49056 | icotek Corporation | Cable Mounting & Accessories KEL 24/10-E black |
| 0 | ||
| 4905-1/2"x72yd | 3M Interconnect | Adhesive Tapes 1/2"x72yd VHB CLEAR TAPE RoHS : Compliant |
| 0 | ||
| 4905-1"x72yd | 3M Interconnect | Adhesive Tapes SMALL PACK 1X72YD BULK SMALL PK RoHS : Compliant |
| 0 | ||
| 490510-2A | OTTO Engineering Inc | Joysticks G3, GRIP BACK HALF, 1 HTWM, NO P9S, |
| 0 | ||
| 49056.200 | icotek Corporation | Cable Mounting & Accessories KEL 24/10-E black V2A |
| 0 | ||
| 4905-3/4x72 | 3M Interconnect | Adhesive Tapes 4905 3/4X72 YD BULK RoHS : Compliant |
| 0 | ||
![]() Newark | 2490540-2 | TE Connectivity | Ventilation Cable Gland, 25L/H, M12X1.5; |Te Connectivity Amp 2490540-2 RoHS : Compliant |
| 600 | |
| 1-2490541-1 | TE Connectivity | Ventilation Cable Gland, 70L/H, Pg9; |Te Connectivity Amp 1-2490541-1 RoHS : Compliant |
| 600 | ||
| 1-2490541-2 | TE Connectivity | Ventilation Cable Gland, 70L/H, Pg9; |Te Connectivity Amp 1-2490541-2 RoHS : Compliant |
| 600 | ||
| 2490541-3 | TE Connectivity | Ventilation Cable Gland, 70L/H, M12X1.5; |Te Connectivity Amp 2490541-3 RoHS : Compliant |
| 599 | ||
| 1-2490541-4 | TE Connectivity | Ventilation Cable Gland, 70L/H, Pg11; |Te Connectivity Amp 1-2490541-4 RoHS : Compliant |
| 450 | ||
| 2490540-6 | TE Connectivity | Ventilation Cable Gland, 35L/H, M16X1.5; |Te Connectivity Amp 2490540-6 RoHS : Compliant |
| 300 | ||
| 1-2490540-4 | TE Connectivity | Ventilation Cable Gland, 35L/H, Pg 11; |Te Connectivity Amp 1-2490540-4 RoHS : Compliant |
| 300 | ||
| CFM-8038BF-490-551-20 | Same Sky | Dc Axial Fan, 68.96Cfm, 12W, 48V; |Same Sky CFM-8038BF-490-551-20 RoHS : Compliant |
| 56 | ||
| 2490540-7 | TE Connectivity | Ventilation Cable Gland, 50L/H, M20X1.5; |Te Connectivity Amp 2490540-7 RoHS : Compliant |
| 48 | ||
| MP014905 | SPC Multicomp | Cbl Tie, Hook & Loop, 310Mm, Nyl/Pp, Blu; |Multicomp Pro MP014905 RoHS : Compliant |
| 45 | ||
TLE4905LE6433HAXA1![]() | Infineon Technologies AG | Hall Effect Sensor, Unipolar, Sip-3; Available Until Stocks Are Exhausted |Infineon Technologies TLE4905LE6433HAXA1 RoHS : Compliant |
| 40 | ||
| CT4049-0.5A | Cal Test Electronics | |Cal Test Electronics CT4049-0.5A RoHS : Compliant |
| 24 | ||
| 4905F 25MM | 3M Interconnect | Foam Tape, Acrylic, 66M X 25Mm; |3M 4905F 25MM RoHS : Not Compliant |
| 2 | ||
| 4905 | Keystone Electronics Corp | Pc Quick-Fit Terminal; |Keystone 4905 RoHS : Not Compliant |
| 0 | ||
| 4905 | Adafruit Industries | 40-Pin Fpc To Straight 2X20 Idc Female Socket Header |Adafruit 4905 RoHS : Not Compliant |
| 0 | ||
![]() RS | 54905BE | Color-Keyed | COPPER ONE-HOLE LUG 6 AWG 1/4" BOLT SIZE TIN PLATED DIE CODE 24 DIECODEBLUE |
| 58 | |
| 2454905 (25532656) (SSCFIA-100087-100RS) | RS Pro | SCREW, 10/32 X 7/8 SOCKET SET SCREW-CUP POINT PLAIN FINISH |
| 10 | ||
| 3/4-5-4905 | TapeCase | 3M VHB, 20 MIL, ACRYLIC - 0.75IN X 5YD ROLL |
| 9 | ||
| 1954905 | RS Pro | CONNECTOR CABLE ASSEMBLY 8K MINI MALE DISPLAYPORT-MALE DISPLAYPORT 6.6FT LENGTH |
| 8 | ||
| 833490-52 | AMETEK Inc | BRUSH ASSY, SET OF 2 CARBON BRUSHES (33490-2) W/HOUSING |
| 8 | ||
| 69083149050 | Norton Winter | QUANTUM VITRIFIED BOND MOUNTED POINT B122 3NQ80-OVS 80 GRIT, 3/8 X 1/8 IN. |
| 5 | ||
| 4905306 | Fenner Drives Inc | GREEN 89 T 6MM 100'/30.5M EAGLE BELTING |
| 3 | ||
| 5349-05 | Norgren | ELEMENT KIT: F44, 08 SERIES |
| 3 | ||
| 2154905 | RS Pro | IEC PTFE FLAT PAIR THERMOCOUPLE CABLE TY |
| 2 | ||
| 0940490591 | Kluber Lubrication | ASONIC GHY 72, 400G, CARTRIDGE PLASTIC BLACK CAP YELLOW |
| 2 | ||
| RNA4905-2RSR-XL (1914458) | INA Bearings | NEEDLE ROLLER BEARING 30MM ID 42MM OD 17 |
| 2 | ||
| OVEL-7-H-15-PQ-VQ4-UA-C-A-V1PNLK-H3 (8049053) | Festo | VACUUM GENERATOR,4MM CONN, 7MM NOZZLE, PNP/NPN/IO LINK SIGNAL |
| 2 | ||
| VMPA2-B8-R3C2-C-06 (549057) | Festo | REGULATOR PLATE, AIR PRESSURE, FOR 4, MPA-S MFLD BLOCK, 2 TO 5 BAR, 21MM |
| 1 | ||
| 4905 | Keystone Electronics Corp | TERMINAL;QUICK-FIT;PCB MALE;.205 TAB;HORIZONTAL;20 AMP RoHS : Compliant |
| 0 | ||
| 4905 | Adafruit Industries | 40-PIN FPC TO STRAIGHT 2X20 IDC FEMALE SOCKET HEADER |
| 0 | ||
![]() Microchip Technology Inc | MIC3490-5.0YM5-TR | Microchip Technology Inc | High Vin, Low Iq Regulator, SOT-23, Projected EOL: 2046-10-29 RoHS : Compliant |
| 2,720 | |
SST38VF6404-90-5C-EKE![]() | Microchip Technology Inc | 2.7V to 3.6V 64Mbit pm Parallel Advanced MPF+, TSOP, Projected EOL: 2036-09-08 RoHS : Compliant |
| 1,632 | ||
| 1N4905 | Microchip Technology Inc | Temperature Compensated _ DO-35, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 2N4905 | Microchip Technology Inc | Power BJT _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 1N4905A | Microchip Technology Inc | Temperature Compensated _ DO-35, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| CDLL4905 | Microchip Technology Inc | Temperature Compensated _ DO-213AA, Projected EOL: 2049-02-05 RoHS : Not Compliant |
| 0 | ||
| 1N4905/TR | Microchip Technology Inc | Temperature Compensated _ DO-35, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| CDLL4905A | Microchip Technology Inc | Temperature Compensated _ DO-213AA, Projected EOL: 2049-02-05 RoHS : Not Compliant |
| 0 | ||
| 1N4905A/TR | Microchip Technology Inc | Temperature Compensated _ DO-35, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| CDLL4905/TR | Microchip Technology Inc | Temperature Compensated _ DO-213AA, Projected EOL: 2049-02-05 RoHS : Not Compliant |
| 0 | ||
| CDLL4905A/TR | Microchip Technology Inc | Temperature Compensated _ DO-213AA, Projected EOL: 2049-02-05 RoHS : Not Compliant |
| 0 | ||
SST38VF6404-90-5I-EKE![]() | Microchip Technology Inc | 2.7V to 3.6V 64Mbit pm Parallel Advanced MPF+, TSOP, Projected EOL: 2036-06-26 RoHS : Compliant |
| 0 | ||
SST38VF6404-90-5C-B3KE![]() | Microchip Technology Inc | 2.7V to 3.6V 64Mbit pm Parallel Advanced MPF+, TFBGA, Projected EOL: 2036-06-10 RoHS : Compliant |
| 0 | ||
SST38VF6404-90-5I-B3KE![]() | Microchip Technology Inc | 2.7V to 3.6V 64Mbit pm Parallel Advanced MPF+, TFBGA, Projected EOL: 2036-04-19 RoHS : Compliant |
| 0 | ||
| SST38VF6404-90-5I-EKE-NCM | Microchip Technology Inc | 2.7V to 3.6V 64 bit parallel advanced MPF+, TSOP, Projected EOL: 2041-03-21 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Bisco Industries | MS9549-05 | Superior Washer & Gasket Company | 22,302 | |||
| MS9549-05 | Moeller Manufacturing & Supply | 1,400 | ||||
| 015-0D49-050 | Superior Washer & Gasket Company | 500 | ||||
| 20849-056 | nVent Schroff | 200 | ||||
| DL6-3449-05-CT-N1 | Staffall | 194 | ||||
| DL5-3449-05-CT-N1 | Staffall | 100 | ||||
| R4-90-511-20 | Southco | Southco Electronic Access and Locking Solutions R4-90-511-20 |
| 13 | ||
| MS9349-05 | UMPCO Inc | 4 | ||||
| NA0149-050 | INSERTS | 3 | ||||
| 1100-49-0519 | Staffall | 2 | ||||
![]() Future Electronics | 4905 | Keystone Electronics Corp | Brass Tin Plate 0.56 inch Length Male PC Quick Fit Terminal RoHS : Compliant |
| 0 | |
![]() Onlinecomponents.com | 38704-4905 | Molex | Conn Barrier Strip 5 POS 8.26mm Solder ST Thru-Hole RoHS : Compliant |
| 364 | |
| 38734-4905 | Molex | SR BTS PC CS 5 ASY C RoHS : Compliant |
| 0 | ||
| 155207-4905 | ITT Interconnect Solutions | Connector Miniature Circular Socket 2 Position Solder Straight Jam Nut 2 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 38724-4905 | Molex | Barrier Strip Terminal Block, 1 Row(s), 1 Deck(s) RoHS : Compliant |
| 0 | ||
| 155626-4905 | ITT Interconnect Solutions | Connector Miniature Circular Socket 2 Position Solder Straight Flange Mount 2 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 155624-4905 | ITT Interconnect Solutions | MKJ1C2C13-2DA RoHS : Compliant |
| 0 | ||
| 121575-4905 | ITT Interconnect Solutions | Circular Connector - Box Mount - Contact Arrangement: 14S-1 - Sockets - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Compliant |
| 0 | ||
| 155204-4905 | ITT Interconnect Solutions | Connector Miniature Circular Socket 2 Position Solder Straight Jam Nut 2 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 155850-4905 | ITT Interconnect Solutions | Connector Miniature Circular Pin 6 Position Solder Cup Straight Cable Mount 6 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| C115371-4905 | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| 14-44-4905 | Molex | 2.54mm Pitch SL™ Insulation Displacement Connector Assembly, Male, Single Row, Version D, Back Ribs, for Wire Size 28 AWG, 0.76µm Gold (Au), 5 Circuits RoHS : Compliant |
| 0 | ||
| GHG-511-4905-R0001 | Cooper Crouse-Hinds | GHG 511 4905 R0001 RoHS : Compliant |
| 0 | ||
| 4905-1-INX72YD | 3M | RoHS : Compliant |
| 0 | ||
| XN-4005-4905-3 | 3M Interconnect | 3M TWIN AXIAL PCI EXPRESS RoHS : Compliant |
| 0 | ||
| 11-18-4905 | Molex | 60742A138 ANVIL RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | AUIRF4905L | Infineon Technologies AG | Power Field-Effect Transistor, 42A I(D), 55V, 0.02ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-262AA RoHS : Compliant |
| 1,264 | |
| IRF4905STRLPBF | Infineon Technologies AG | MOSFET P-Channel 55V 42A (Tc) TO-263-3 T/R RoHS : Not Compliant |
| 33,078 | ||
| AUIRF4905 | Infineon Technologies AG | MOSFET P-Channel 55V 74A (Tc) TO-220-3 Tube RoHS : Compliant |
| 78 | ||
| TLE4905LHALA1 | Infineon Technologies AG | Solid State Magnetic Sensor Unipolar Switch Hall Effect 3-SIP Ammo RoHS : Compliant |
| 4 | ||
| IRF4905PBF | Infineon Technologies AG | MOSFET P-Channel 55V 74A (Tc) TO-220-3 Tube RoHS : Compliant |
| 59,560 | ||
| CY24905ZXC | Cypress Semiconductor | CLOCK GENERATOR |
| 4,627 | ||
| CY24905ZXCT | Cypress Semiconductor | CLOCKS |
| 5,000 | ||
MC34905CS3EK![]() | Freescale Semiconductor | Specialized Power Management System Basis Chip 32-SOP Tube RoHS : Compliant |
| 82 | ||
| HA9P4905-5 | Harris Semiconductor | Comparator General Purpose 4 CH Push-Pull 16-SOIC RoHS : Not Compliant |
| 987 | ||
AUIRF4905![]() | International Rectifier | MOSFET P-Channel 55V 74A (Tc) TO-220-3 Tube RoHS : Compliant |
| 54 | ||
| AUIRF4905L | International Rectifier | Power Field-Effect Transistor, 42A I(D), 55V, 0.02ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-262AA RoHS : Compliant |
| 5,129 | ||
IRF4905LPBF![]() | International Rectifier | MOSFET P-Channel 55V 42A (Tc) TO262 Tube RoHS : Compliant |
| 2 | ||
HA9P4905-5![]() | Intersil Corporation | Comparator General Purpose 4 CH Push-Pull 16-SOIC RoHS : Not Compliant |
| 66 | ||
| HA9P4905-5Z | Intersil Corporation | Comparator General Purpose 4 CH Push-Pull 16-SOIC Tube RoHS : Compliant |
| 2 | ||
| HA9P4905-5Z | Renesas Electronics Corporation | Comparator General Purpose 4 CH Push-Pull 16-SOIC Tube RoHS : Compliant |
| 2 | ||
![]() Sager | 4905 | Keystone Electronics Corp | Terminals QUICK FIT TERMINAL RoHS : Compliant |
| 0 | |
| 7704905075 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7704905156 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 54905BEUFPH-1 | ABB Group | LNG BAR NO.6 1/4 BH 45DEG PEEP HOLE |
| 0 | ||
| 7704905029 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7704905074 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7704905155 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| FW-49-05-L-D-330-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| CA1-B0-34-490-522-I | Carling Technologies | Circuit Breakers CA1B034490522I RoHS : Compliant | 0 | |||
| ERM8-049-05.0-L-DV-DS-L-FR | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| ERM8-049-05.0-S-DV-DS-TR | Samtec Inc | Board to Board & Mezzanine Connectors 0.80 mm Edge Rate Rugged High Speed Terminal RoHS : Compliant |
| 0 | ||
| FW-49-05-L-D-325-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-49-05-L-D-350-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 54905BE | ABB Group | Fixed Terminal Blocks |
| 0 | ||
| 0192490502 | Molex | Molex | 0 | |||
![]() TME | 2134905-1 | TE Connectivity | Connector: wire-wire; plug; female; Automotive; for cable; crimped RoHS : Compliant |
| 2,500 | |
| 4905 | Keystone Electronics Corp | Terminal: flat; 5.2mm; 0.5mm; male; THT; brass; tinned; angled 90° RoHS : Compliant |
| 33 | ||
| 2490520000 | Weidmüller Interface GmbH & Co. KG | Splice terminal: rail; 57A; spring clamp; beige; wemid; 10mm2; TS35 RoHS : Compliant |
| 23 | ||
| 44905 | Mega Electronics Inc | Grindingstone; 5pcs; plunger; 6mm |
| 10 | ||
| 704.905.5 | EAO AG | Contact block; 22mm; 04; front fixing; plug-in terminals; 500VAC RoHS : Compliant |
| 6 | ||
| 94905 | Goobay | Patch cord; S/FTP; Cat 6a; RJ45 plug,both sides; 30m; stranded; Cu |
| 5 | ||
| 49.0518 | SCANGRIP North America Inc | Lamp: working; Kit: 4 heads,handle; -10÷40°C; 5pcs; case |
| 1 | ||
| 1-2490541-0 | TE Connectivity | Vented; PG9; IP66,IP68; polyamide; grey; Cable gland: cable RoHS : Compliant |
| 0 | ||
| 2-2176490-5 | TE Connectivity | Resistor: wire-wound; 470Ω; with heatsink; 100W; ±5%; 848V; 150mm RoHS : Compliant |
| 0 | ||
| 2490540-4 | TE Connectivity | Vented; M16; IP66,IP67; brass; silver; Cable gland: cable RoHS : Compliant |
| 0 | ||
| 1-2490540-5 | TE Connectivity | Vented; PG13,5; IP66,IP67; brass; silver; Cable gland: cable RoHS : Compliant |
| 0 | ||
| 7000-13161-3490500 | Murrelektronik GmbH | Cable: for sensors; PIN: 5; M12 male; angled; 5m; plug; 60VDC; 50VAC RoHS : Compliant |
| 0 | ||
| 1-2490540-6 | TE Connectivity | Vented; PG13,5; IP66,IP67; brass; silver; Cable gland: cable RoHS : Compliant |
| 0 | ||
| 404905 | KING TONY | Socket: RIBE®-bit; RIBE®; RIBE®M5; 1/2"; 100mm; long |
| 0 | ||
| 490 5M 9 | OPTIBELT GmbH | Timing belt; 5M; 490mm; metric; OMEGA |
| 0 | ||
![]() Ameya Holding Limited | IRF4905PBF | Infineon Technologies AG | Hong Kong RoHS : Compliant | 138,000 | ||
| IRF4905STRLPBF | Infineon Technologies AG | RoHS : Compliant | 5,600 | |||
![]() ComSIT USA | TLE6237G4905AA | Infineon Technologies AG | Electronic Component RoHS : Not Compliant | 5,000 | ||
IRF4905STRLPBF![]() | International Rectifier | HEXFET Power MOSFET Power Field-Effect Transistor, 42A I(D), 55V, 0.02ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB RoHS : Compliant | 1,470 | |||
IRF4905PBF![]() | International Rectifier | HEXFET POWER MOSFET Power Field-Effect Transistor, 74A I(D), 55V, 0.02ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Compliant | 579 | |||
| AUIRFI4905 | International Rectifier | HEXFET POWER MOSFET Power Field-Effect Transistor, 39A I(D), 55V, 0.02ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Not Compliant | 500 | |||
| AUIRF4905L | International Rectifier | HEXFET POWER MOSFET Power Field-Effect Transistor, 42A I(D), 55V, 0.02ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-262AA RoHS : Not Compliant | 150 | |||
| HA9P4905SZ | Intersil Corporation | Electronic Component RoHS : Compliant | 63 | |||
| HA9P49055 | Intersil Corporation | PRECISION QUAD COMPARATOR Comparator, 4 Func, 10000uV Offset-Max, 180ns Response Time, BIPolar, PDSO16 RoHS : Not Compliant | 52 | |||
| IRF4905SPBF | International Rectifier | HEXFET Power MOSFET Power Field-Effect Transistor, 42A I(D), 55V, 0.02ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252 RoHS : Not Compliant | 50 | |||
| AUIRF4905STRL | Infineon Technologies AG | Power Field-Effect Transistor, 42A I(D), 55V, 0.02ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB RoHS : Compliant | 25 | |||
| AUIRF4905S | Infineon Technologies AG | Power Field-Effect Transistor, 42A I(D), 55V, 0.02ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB RoHS : Compliant | 7 | |||
![]() Interstate Connecting Components | 684905-1 | TE Connectivity | PLATE, BASE RoHS : Compliant |
| 0 | |
| CA121004-905 | ITT Interconnect Solutions | CA121004-905 | 0 | |||
| SA85002714905 | SOURIAU-SUNBANK | J38601 | 0 | |||
| 057-8749-052 | ITT Interconnect Solutions | 057-8749-052 | 0 | |||
| 2490541-3 | TE Connectivity | VENT CG,PA6,M12,4-8,8,BLK RoHS : Compliant | 0 | |||
| SP44905X-13 | TE Connectivity | 44905X GSFC 311P18-05T101 RoHS : Not Compliant |
| 0 | ||
| 749-051 | Glenair Inc | 0 | ||||
| 1-2490541-1 | TE Connectivity | VENT CG,PA6,PG9,4-8,8,LGR RoHS : Compliant | 0 | |||
| 1-2490541-2 | TE Connectivity | VENT CG,PA6,PG9,4-8,8,BLK RoHS : Compliant | 0 | |||
| 4-1437490-5 | TE Connectivity | 7022X16CA2=21VDC 1.5-15 SEC,A2 RoHS : Compliant |
| 0 | ||
| 2490540-6 | TE Connectivity | VENT CG,BRASS,M16,5-9,8 RoHS : Compliant | 0 | |||
| 058-8549-055 | ITT Interconnect Solutions | END-CA000106 DT 14S-D14-A34 | 0 | |||
| 057-8749-050 | ITT Interconnect Solutions | 057-8749-050 | 0 | |||
| 687-049-05 | Glenair Inc | MICRO-D HARDWARE | 0 | |||
| 217-8749-052 | ITT Interconnect Solutions | 217-8749-052 | 0 | |||
![]() PEI Genesis | CA121004-905 | ITT Interconnect Solutions |
| 0 | ||
| 10-497649-055 | Amphenol Corporation |
| 0 | |||
| S4905-24 | SOURIAU-SUNBANK |
| 0 | |||
| S4905-20 | SOURIAU-SUNBANK |
| 0 | |||
| 836149054 | Ulti-Mate Connector Inc |
| 0 | |||
| S1816C4905-8 | SOURIAU-SUNBANK |
| 0 | |||
| 05A149-05S01 | SOURIAU-SUNBANK |
| 0 | |||
| 836249052 | Ulti-Mate Connector Inc |
| 0 | |||
| 7-10049-05 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | ACW4249-0.50-G233-0CK0587 | TE Connectivity | Connectors |
| 9,900 | |
| 81044/12-24-905 | TE Connectivity | Connectors RoHS : Compliant |
| 792 | ||
| 1604905-1 | TE Connectivity | backshells, RoHS : Compliant |
| 497 | ||
| TSW-149-05-T-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 160 | ||
| MTMM-149-05-G-D-191 | Samtec Inc | Connector Header RoHS : Compliant |
| 59 | ||
| 88-443149-05S | Amphenol Corporation | PLUG |
| 55 | ||
| 88-463549-05S | Amphenol Corporation | RECEPT |
| 41 | ||
| 72-314049-05P | Amphenol Corporation | MIL-C 26482 SERIES I CONNECTOR |
| 22 | ||
| 71-400449-05P | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 17 | ||
| 88-443049-05T | Amphenol Corporation | PLUG |
| 16 | ||
| 88-443049-05Z | Amphenol Corporation | PLUG |
| 3 | ||
| 2161490-5 | TE Connectivity | ASSEMBLY, FEED, SPLICE |
| 2 | ||
| 91-542249-05T | Amphenol Corporation | RECEPT |
| 1 | ||
| 1490597-1 | TE Connectivity | TE COMPONENT (REF 1490597-1) RoHS : Compliant |
| 1 | ||
| 88-443749-05T | Amphenol Corporation | PLUG |
| 1 | ||
![]() Richardson RFPD | MHODB24490507NM-IP | Amphenol PCTEL | Industrial IoT Radio Module RoHS : Not Compliant |
| 0 | |
| MIC3490-5.0YM5-TR | Microchip Technology Inc | LDO Regulator Pos 5V 0.1A 5-Pin SOT-23 T/R RoHS : Compliant | 0 | |||
| SP44905X-13 | TE Connectivity | Discrete NTC RoHS : Not Compliant |
| 0 | ||
| CO4905-1.8432-T-TR | Raltron Electronics Corporation | OSCILLATOR CRYSTAL RoHS : Compliant | 0 | |||
| SI5356B-B04905-GM | Skyworks Solutions Inc | I2C PROGRAMMABLE, ANY-FREQUENCY 1-200 MHZ,QUAD FRE RoHS : Compliant | 0 | |||
| MUF4905 | Amphenol PCTEL | 490-512,5DB,CHR RoHS : Not Compliant |
| 0 | ||
| SI5356B-B04905-GMR | Skyworks Solutions Inc | I2C PROGRAMMABLE, ANY-FREQUENCY 1-200 MHZ,QUAD FRE RoHS : Compliant | 0 | |||
| SP44905X-24 | TE Connectivity | Precision NTC Glass Thermistor RoHS : Not Compliant |
| 0 | ||
| 1490597-1 | TE Connectivity | Crimping Die Assembly RoHS : Compliant |
| 0 | ||
| 1490534-1 | TE Connectivity | Crimping Dies For Solistrand Terminals And Splices RoHS : Compliant | 0 | |||
| CO4905-20.000-TR | Raltron Electronics Corporation | OSCILLATOR CRYSTAL RoHS : Compliant | 0 | |||
| 1490598-1 | TE Connectivity | Tools and Accessories, Die Assembly, Terminal #6 RoHS : Compliant |
| 0 | ||
| CO4905-24.000-EXT-TR | Raltron Electronics Corporation | OSCILLATOR CRYSTAL RoHS : Compliant | 0 | |||
| SP44905X-19 | TE Connectivity | Precision NTC Glass Thermistor RoHS : Not Compliant |
| 0 | ||
| SP44905X-15 | TE Connectivity | Thermistor NTC 5K Ohm 0.2% 2-Pin Cable Mount Wire RoHS : Not Compliant |
| 0 | ||
![]() Rutronik | IRF4905STRLPBF | Infineon Technologies AG | P-CH 55V 42A 20mOhm TO263 RoHS : Compliant |
| 15,200 | |
| IRF4905PBF | Infineon Technologies AG | P-CH 55V 74A 20mOhm TO220 RoHS : Compliant |
| 7,600 | ||
![]() Chip 1 Exchange | 490-5926-2-ND | Murata Manufacturing Co Ltd | INSTOCK | 6,068 | ||
| IRF4905SPBF | International Rectifier | INSTOCK RoHS : Compliant | 3,920 | |||
| CO4905-19.44MHZ | INSTOCK | 1,000 | ||||
| SST38VF6404-90-5C-B3KE | INSTOCK | 289 | ||||
| IRF4905STRL | INSTOCK | 190 | ||||
| IRF4905S | INSTOCK | 158 | ||||
| IRF4905PBF | Infineon Technologies AG | INSTOCK RoHS : Compliant | 36 | |||
| 104-49054 | ept Connectors | INSTOCK RoHS : Compliant | 18 | |||
![]() Avnet Abacus | 349052447 | Molex | (Alt: 349052447) RoHS : Compliant | 60,000 | ||
| 684905-1 | TE Connectivity | (Alt: 684905-1) RoHS : Not Compliant | 0 | |||
| 2049050-1 | TE Connectivity | AMP20490501 (Alt: 2049050-1) RoHS : Compliant | 0 | |||
| 387244905 | Molex | Conn Barrier Strip 5 POS 953mm Solder ST ThruHole (Alt: 387244905) RoHS : Compliant | 0 | |||
| 2490541-3 | TE Connectivity | VENT CGPA6M12488BLK (Alt: 2490541-3) RoHS : Compliant | 0 | |||
| 834249058 | Molex | Cable Assembly 28AWG 25 POS Commercial MicroD to 25 POS Commercial MicroD FF CrimpCrimp Bag (Alt: 834249058) RoHS : Compliant | 0 | |||
| 834249058 | Molex | Cable Assembly 28AWG 25 POS Commercial MicroD to 25 POS Commercial MicroD FF CrimpCrimp Bag (Alt: 834249058) RoHS : Compliant | 0 | |||
| 704905-000 | TE Connectivity | (Alt: 704905-000) RoHS : Compliant | 0 | |||
| 6-146490-5 | TE Connectivity | (Alt: 6-146490-5) RoHS : Compliant | 0 | |||
| 49058-16T12 | ITT Interconnect Solutions | CAN4905816T12 (Alt: 05213006812) RoHS : Compliant | 0 | |||
| SP44905X-13 | TE Connectivity | (Alt: SP44905X-13) RoHS : Compliant | 0 | |||
| 1-2490541-1 | TE Connectivity | VENT CGPA6PG9488LGR (Alt: 1-2490541-1) RoHS : Compliant | 0 | |||
| 1-2490541-2 | TE Connectivity | VENT CGPA6PG9488BLK (Alt: 1-2490541-2) RoHS : Compliant | 0 | |||
| ERF8-049-05.0-S-DV-L-TR | Samtec Inc | Mezzanine Connector Receptacle 08 mm 2 Rows 98 Contacts Straight Solder Surface Mount (Alt: ERF8-049-05.0-S-DV-L-TR) RoHS : Compliant | 0 | |||
| ERM8-049-05.0-S-DV-DS-TR | Samtec Inc | Mezzanine Connector Header 08 mm 2 Rows 98 Contacts Surface Mount Phosphor Bronze (Alt: ERM8-049-05.0-S-DV-DS-TR) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 2490546-2 | TE Connectivity | (Alt: 2490546-2) RoHS : Compliant | 0 | ||
| 2490599-1 | TE Connectivity | CONN,GEN Z,9.25MM,FEMALE,BLK,2X28,0.6MM, (Alt: 2490599-1) RoHS : Compliant | 0 | |||
| 2490546-1 | TE Connectivity | (Alt: 2490546-1) RoHS : Compliant | 0 | |||
| 0349052447 | Molex | Terminal, Socket, Wire to Board Connector, Tin, Copper Alloy, Cable Mount, Straight, 34905 Series (Alt: 0349052447) RoHS : Compliant | 0 | |||
| 5044490507 | Molex | Pin Header, 5 Contacts, 1 Row, 1mm, Gold, 1.5A, Straight, Shrouded, Phosphor Bronze, Wire-to-Board (Alt: 5044490507) RoHS : Compliant | 0 | |||
![]() Avnet Silica | SC4905BIMSTRT![]() | Semtech Corporation | (Alt: SC4905BIMSTRT) RoHS : Compliant | 0 | ||
| MIC3490-5.0YM5-TR | Microchip Technology Inc | High Input Voltage LDO Regulator 5V 5Pin SOT23 TR (Alt: MIC3490-5.0YM5-TR) RoHS : Compliant | 0 | |||
SST38VF6404-90-5C-EKE![]() | Microchip Technology Inc | Flash Parallel 33V 64Mbit 4M x 16bit 90ns 48Pin TSOP Tray (Alt: SST38VF6404-90-5C-EKE) RoHS : Compliant | 0 | |||
SST38VF6404-90-5I-EKE![]() | Microchip Technology Inc | Flash Parallel 33V 64Mbit 4M x 16bit 90ns 48Pin TSOP Tray (Alt: SST38VF6404-90-5I-EKE) RoHS : Compliant | 0 | |||
SST38VF6404-90-5I-B3KE![]() | Microchip Technology Inc | Flash Parallel 33V 64Mbit 4M x 16bit 90ns 48Pin TFBGA Tray (Alt: SST38VF6404-90-5I-B3KE) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | IRF4905S![]() | International Rectifier | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 127 | |
IRF4905![]() | International Rectifier | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 114 | ||
| IRF4905-TR | International Rectifier | IN STOCK SHIP TODAY |
| 108 | ||
IRF4905PBF![]() | International Rectifier | IN STOCK SHIP TODAY RoHS : Compliant |
| 92 | ||
| 88924-905 | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Unknown | 30 | |||
| IRF4905STRLPBF | Infineon Technologies AG | IN STOCK SHIP TODAY RoHS : Compliant |
| 22 | ||
IRF4905L![]() | International Rectifier | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 17 | ||
| 57.504.9055.0 | Wieland Electric GmbH | IN STOCK SHIP TODAY RoHS : Compliant |
| 3 | ||
![]() DB Roberts | 005249059905 | Essentra Components | SPACER 2.6X5X10 BLACK POM | 0 | ||
| 07349-05654 | Avdel | EXTENDED 14 INTERLOK NT IP | 0 | |||
| FCWA-0349-050 | Essentra Components | 0 | ||||
| 14905 | Heyco | BRASS CGHT M6-025X5MMTHD | 0 | |||
| 464905 | Essentra Components | 0 | ||||
| R4-90-511-20 | Southco | These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging | 0 | |||
![]() EBV Elektronik | IRF4905PBF | Infineon Technologies AG | Power MOSFET P Channel 55 V 74 A 002 ohm TO220AB Through Hole (Alt: SP001571330) RoHS : Compliant | 62,000 | ||
| IRF4905STRLPBF | Infineon Technologies AG | Trans MOSFET PCH 55V 74A 3Pin2Tab D2PAK TR (Alt: SP001559632) RoHS : Compliant | 56,800 | |||
| IRF4905LPBF | Infineon Technologies AG | Power MOSFET P Channel 55 V 74 A 002 ohm TO262 Through Hole (Alt: SP001563376) RoHS : Compliant | 0 | |||
| RN4905,LF(CT | Toshiba America Electronic Components | (Alt: RN4905,LF(CT) RoHS : Compliant | 0 | |||
| RN4905FE,LXHF | Toshiba America Electronic Components | Digital Transistors AUTO AECQ 2in1 Pointsymmetrical PNP NPN Q1BSR22kO Q1BER47kO (Alt: RN4905FE,LXHF) RoHS : Compliant | 0 | |||
| MIC3490-5.0YM5-TR | Microchip Technology Inc | High Input Voltage LDO Regulator 5V 5Pin SOT23 TR (Alt: MIC3490-5.0YM5-TR) RoHS : Compliant | 0 | |||
| RN4905FE(TE85L,F) | Toshiba America Electronic Components | (Alt: RN4905FE(TE85L,F)) RoHS : Compliant | 0 | |||
SST38VF6404-90-5C-EKE![]() | Microchip Technology Inc | Flash Parallel 33V 64Mbit 4M x 16bit 90ns 48Pin TSOP Tray (Alt: SST38VF6404-90-5C-EKE) RoHS : Compliant | 0 | |||
SST38VF6404-90-5I-EKE![]() | Microchip Technology Inc | Flash Parallel 33V 64Mbit 4M x 16bit 90ns 48Pin TSOP Tray (Alt: SST38VF6404-90-5I-EKE) RoHS : Compliant | 0 | |||
SST38VF6404-90-5I-B3KE![]() | Microchip Technology Inc | Flash Parallel 33V 64Mbit 4M x 16bit 90ns 48Pin TFBGA Tray (Alt: SST38VF6404-90-5I-B3KE) RoHS : Compliant | 0 | |||
![]() FDH Electronics | M49055/12-13 | TEMP-FLEX, LLC | Wire and Cable | 310 | ||
| 85003314905 | SOURIAU-SUNBANK | Connector 26482 | 107 | |||
| M49055/12-24 | Anixter Inc | Wire and Cable | 91 | |||
| 85010774905 | SOURIAU-SUNBANK | Connector Misc | 75 | |||
| 85002654905 | SOURIAU-SUNBANK | Connector Acc |
| 61 | ||
| M22759/11-24-9058 | Whitmore/Wirenetics | Wire and Cable | 31 | |||
| M22759/11-24-9057 | Whitmore/Wirenetics | Wire and Cable | 31 | |||
| M22759/11-24-9056 | Whitmore/Wirenetics | Wire and Cable | 31 | |||
| M22759/11-24-905 | Whitmore/Wirenetics | Hook-Up Wire | 31 | |||
| 749-051 | Glenair Inc | Connector | 2 | |||
| 50084949-05 | Honeywell Sensing and Control | Switches |
| 0 | ||
| SA85002734905 | SOURIAU-SUNBANK | Connector 26482 |
| 0 | ||
| 85002694905 | SOURIAU-SUNBANK | Connector 26482 |
| 0 | ||
| 85019644905 | SOURIAU-SUNBANK | Circular Conn | 0 | |||
| 85002674905 | SOURIAU-SUNBANK | Circular Conn |
| 0 | ||
![]() Flip Electronics | AUIRFI4905 | Infineon Technologies AG | Stock RoHS : Compliant | 4,000 | ||
![]() Maritex | IRF4905STRLPBF | Infineon Technologies AG | MOSFETs; IRF4905STRLPBF; INFINEON TECHNOLOGIES; -55 V; -74 A; 20 V; 170 W RoHS : Compliant |
| 8,263 | |
| IRF4905PBF-VB | VBsemi Electronics Co Ltd | MOSFETs; IRF4905PBF-VB; VBSEMI |
| 135 | ||
| IRF4905STRPBF | VBsemi Electronics Co Ltd | Transistor: P-MOSFET; unipolar; -60V; -80A; 0,019ohm; 104.2W; -55+150 st.C; SMD; TO263 (D2PAK) |
| 88 | ||
| IRF4905PBF | Infineon Technologies AG | MOSFETs; IRF4905PBF; INFINEON TECHNOLOGIES; -55 V; -74 A; 20 V; 200 W RoHS : Compliant |
| 18 | ||
![]() Pasternack Enterprises US | PE3W14905 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Low Loss Cable Using LMR-LW195 Coax., Radio frequency assembly BNC male to BNC male low loss cable using LMR-LW195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable using LMR-LW195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14905 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14905 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3W14905 is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 6,260 | ||
| PE3W14905-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male to BNC Male Low Loss Cable 12 Inch Length Using LMR-LW195 Coax., Radio frequency assembly BNC male to BNC male low loss cable 12 inch length using LMR-LW195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 12 inch length using LMR-LW195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14905-12 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14905-12 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3W14905-12 is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 2,742 | ||
| PE3W14905-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Male to BNC Male Low Loss Cable 24 Inch Length Using LMR-LW195 Coax., Radio frequency assembly BNC male to BNC male low loss cable 24 inch length using LMR-LW195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 24 inch length using LMR-LW195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14905-24 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14905-24 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3W14905-24 is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,371 | ||
| PE3W14905-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Male to BNC Male Low Loss Cable 36 Inch Length Using LMR-LW195 Coax., Radio frequency assembly BNC male to BNC male low loss cable 36 inch length using LMR-LW195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 36 inch length using LMR-LW195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14905-36 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14905-36 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3W14905-36 is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 914 | ||
| PE3W14905-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to BNC Male Low Loss Cable 48 Inch Length Using LMR-LW195 Coax., Radio frequency assembly BNC male to BNC male low loss cable 48 inch length using LMR-LW195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 48 inch length using LMR-LW195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14905-48 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14905-48 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3W14905-48 is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 685 | ||
| PE3W14905-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-LW195 Coax., Radio frequency assembly BNC male to BNC male low loss cable 60 inch length using LMR-LW195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 60 inch length using LMR-LW195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14905-60 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14905-60 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3W14905-60 is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 548 | ||
| PE4905 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: MMCX, Connector Gender: Plug, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: Thru Hole. MMCX Plug Connector Solder Attachment Thru Hole PCB, .100 inch x .031 inch Hole Spacing. PE4905 MMCX plug pcb connector has an interface type of thru hole and a 50 Ohm impedance. Pasternack MMCX plug connector uses shield/contact solder as an attachment method. Our plug MMCX pcb connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack MMCX plug pcb connector has a PTFE dielectric type. The Pasternack MMCX pcb connector has a brass body with gold over nickel plating. Our PE4905 MMCX connector uses beryllium copper contact. This MMCX plug pcb RF connector is REACH compliant. This Pasternack plug MMCX connector will ship the same day as purchased. Our MMCX plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom MMCX connector cable assemblies that will ship the same day as well. |
| 164 | ||
| PE3C4905 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to Slide-On BMA Jack Right Angle 2 Hole Flange Cable Using PE-SR402FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and right angle BMA 2 hole flange cable connection on the other. Our BMA to right angle BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4905, can also be known as a BMA male to right angle BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4905 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to right angle BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA right angle jack 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4905 can also be used in the other direction and will be right angle BMA jack 2 hole flange to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA right angle female 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable using PE-SR402FLJ coax. | 35 | |||
| PE3C8490-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. Fire Rated 7/16 DIN Female to N Male Low PIM Cable 50 CM Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 7/16 DIN female to N male low PIM cable 50 cm length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 7/16 DIN female to N male low PIM cable 50 cm length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and N type cable connection on the other. Our low PIM 7/16 DIN to type N cable assemblies have a female gender on end 1 and male on end 2. This 7/16 DIN to N type cable is a female to male coax assembly, PE3C8490-50CM, can also be known as a low PIM 7/16 DIN jack to type N plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN jack to type N plug cable assembly PE3C8490-50CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN female to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8490-50CM can also be used in the other direction and will be type N male to 7/16 DIN female cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN jack to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 7/16 DIN female to N male low PIM cable 50 cm length using SPF-250 coax using Times Microwave parts. |
| 11 | ||
| PE3C4905-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Plug Bulkhead to Slide-On BMA Jack Right Angle 2 Hole Flange Cable 12 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 12 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 12 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and right angle BMA 2 hole flange cable connection on the other. Our BMA to right angle BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4905-12, can also be known as a BMA male to right angle BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4905-12 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to right angle BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA right angle jack 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4905-12 can also be used in the other direction and will be right angle BMA jack 2 hole flange to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA right angle female 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 12 inch length using PE-SR402FLJ coax. |
| 7 | ||
| PE3C4905-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 24 inches. Slide-On BMA Plug Bulkhead to Slide-On BMA Jack Right Angle 2 Hole Flange Cable 24 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 24 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 24 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and right angle BMA 2 hole flange cable connection on the other. Our BMA to right angle BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4905-24, can also be known as a BMA male to right angle BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4905-24 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to right angle BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA right angle jack 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4905-24 can also be used in the other direction and will be right angle BMA jack 2 hole flange to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA right angle female 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 24 inch length using PE-SR402FLJ coax. |
| 7 | ||
| PE3C4905-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Plug Bulkhead to Slide-On BMA Jack Right Angle 2 Hole Flange Cable 60 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 60 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 60 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and right angle BMA 2 hole flange cable connection on the other. Our BMA to right angle BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4905-60, can also be known as a BMA male to right angle BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4905-60 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to right angle BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA right angle jack 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4905-60 can also be used in the other direction and will be right angle BMA jack 2 hole flange to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA right angle female 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 60 inch length using PE-SR402FLJ coax. |
| 7 | ||
| PE3W04905 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. 1.85mm Male to BNC Female 4 Hole Flange Cable Using PE-047SR Coax. PE3W04905 is a 1.85mm male to BNC female 4 hole flange cable using PE-047SR coax. This Pasternack 1.85mm male to BNC female 4 hole flange cable assembly uses a 50 Ohm 1.85mm for connector 1 and a 50 Ohm BNC for connector 2. Our male 1.85mm to female BNC 4 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04905 1.85mm male to BNC female 4 hole flange cable assembly is constructed with PE-047SR coax. | 0 | |||
| PE3W24905 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. MMCX Jack to Reverse Polarity SMA Female Bulkhead Cable Using RG174 Coax. PE3W24905 is a MMCX jack to reverse polarity SMA female bulkhead cable using RG174 coax. This Pasternack MMCX jack to reverse polarity SMA female bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. Our jack MMCX to reverse polarity female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24905 MMCX jack to SMA reverse polarity female bulkhead cable assembly is constructed with RG174 coax. | 0 | |||
| PE44905 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: 2.92mm, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Non-Solder Contact, Mount Method: 4 Hole Flange, Minimum Frequency: DC, Maximum Frequency: 40 GHz, Interface Type 1: PE-047SR, Interface Type 2: PE-SR047FL. 2.92mm Female Connector Clamp/Non-Solder Contact Attachment 4 Hole Flange Mount for PE-047SR, PE-SR047FL. PE44905 2.92mm female 4 hole flange coaxial connector has an interface type of PE-047SR, PE-SR047FL and a 50 Ohm impedance. Pasternack 2.92mm female 4 hole flange connector uses shield/contact clamp/non-solder contact as an attachment method. Our female 2.92mm coaxial connector provides a minimum frequency of DC and a maximum frequency of 40 GHz. The Pasternack 2.92mm female 4 hole flange coaxial connector has a ULTEM dielectric type and a VSWR of 1.2. The Pasternack 2.92mm coaxial connector has a passivated stainless steel body. Our PE44905 2.92mm connector uses beryllium copper contact. This 2.92mm female 4 hole flange coaxial RF connector is RoHS and REACH compliant. This Pasternack female 2.92mm 4 hole flange connector will ship the same day as purchased. Our 4 hole flange 2.92mm female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 2.92mm connector cable assemblies that will ship the same day as well. |
| 0 | ||
![]() TE Connectivity | 1-2490541-1 | TE Connectivity | VENT CG,PA6,PG9,4-8,8,LGR Cable Gland Product Type: Ventilated Cable Gland Primary Product Material: PA 6 Clamping Diameter Range: 4 – 8 mm Primary Product Color: Light Gray Outer Thread Size: PG9 Ventilated Cable Gland PA 6 4 – 8 mm Light Gray | Ventilation Cable Gland | Part Number: 1-2490541-1 | Internal Number: 1-2490541-1 | TE Connectivity RoHS : Compliant |
| 592 | |
| 2490541-2 | TE Connectivity | VENT CG,PA6,M12,4-8,8,LGR Cable Gland Product Type: Ventilated Cable Gland Primary Product Material: PA 6 Clamping Diameter Range: 4 – 8 mm Primary Product Color: Light Gray Outer Thread Size: M12 x 1.5 Ventilated Cable Gland PA 6 4 – 8 mm Light Gray | Ventilation Cable Gland | Part Number: 2490541-2 | Internal Number: 2490541-2 | TE Connectivity RoHS : Compliant |
| 584 | ||
| 2134905-1 | TE Connectivity | GIC 2.5W PLUG HSG 6P NATURAL Number of Positions: 6 Connector & Housing Type: Plug Connector Product Type: Housing Connector System: Wire-to-Wire UL Flammability Rating: UL 94V-0 Std Temp Sig Grace Inertia Plug | 6 Plug Housing Wire-to-Wire | Part Number: 2134905-1 | Internal Number: 2134905-1 | TE Connectivity RoHS : Compliant |
| 464 | ||
| 1-2490541-4 | TE Connectivity | VENT CG,PA6,PG11,4-8,8,LGR Cable Gland Product Type: Ventilated Cable Gland Primary Product Material: PA 6 Clamping Diameter Range: 4 – 8 mm Primary Product Color: Light Gray Outer Thread Size: PG11 Ventilated Cable Gland PA 6 4 – 8 mm Light Gray | Ventilation Cable Gland | Part Number: 1-2490541-4 | Internal Number: 1-2490541-4 | TE Connectivity RoHS : Compliant |
| 443 | ||
| 2490540-3 | TE Connectivity | VENT CG,BRASS,M16,2-6,8 Cable Gland Product Type: Ventilated Cable Gland Primary Product Material: Brass Clamping Diameter Range: 2 – 6 mm Primary Product Plating Material: Nickel Outer Thread Size: M16 x 1.5 Ventilated Cable Gland Brass 2 – 6 mm Nickel | Ventilation Cable Gland | Part Number: 2490540-3 | Internal Number: 2490540-3 | TE Connectivity RoHS : Compliant |
| 304 | ||
| 2490540-6 | TE Connectivity | VENT CG,BRASS,M16,5-9,8 Cable Gland Product Type: Ventilated Cable Gland Primary Product Material: Brass Clamping Diameter Range: 5 – 9 mm Primary Product Plating Material: Nickel Outer Thread Size: M16 x 1.5 Ventilated Cable Gland Brass 5 – 9 mm Nickel | Ventilation Cable Gland | Part Number: 2490540-6 | Internal Number: 2490540-6 | TE Connectivity RoHS : Compliant |
| 296 | ||
| 2490540-4 | TE Connectivity | VENT CG,BRASS,M16,4-7,8 Cable Gland Product Type: Ventilated Cable Gland Primary Product Material: Brass Clamping Diameter Range: 4 – 7 mm Primary Product Plating Material: Nickel Outer Thread Size: M16 x 1.5 Ventilated Cable Gland Brass 4 – 7 mm Nickel | Ventilation Cable Gland | Part Number: 2490540-4 | Internal Number: 2490540-4 | TE Connectivity RoHS : Compliant |
| 294 | ||
| 1-2490540-6 | TE Connectivity | VENT CG,BRASS,PG13.5,6-11,9 Cable Gland Product Type: Ventilated Cable Gland Primary Product Material: Brass Clamping Diameter Range: 6 – 11 mm Primary Product Plating Material: Nickel Outer Thread Size: PG13.5 Ventilated Cable Gland Brass 6 – 11 mm Nickel | Ventilation Cable Gland | Part Number: 1-2490540-6 | Internal Number: 1-2490540-6 | TE Connectivity RoHS : Compliant |
| 293 | ||
| 1-2490540-5 | TE Connectivity | VENT CG,BRASS,PG13.5,5-9,9 Cable Gland Product Type: Ventilated Cable Gland Primary Product Material: Brass Clamping Diameter Range: 5 – 9 mm Primary Product Plating Material: Nickel Outer Thread Size: PG13.5 Ventilated Cable Gland Brass 5 – 9 mm Nickel | Ventilation Cable Gland | Part Number: 1-2490540-5 | Internal Number: 1-2490540-5 | TE Connectivity RoHS : Compliant |
| 289 | ||
| 2490540-8 | TE Connectivity | VENT CG,BRASS,M20,6-11,8 Cable Gland Product Type: Ventilated Cable Gland Primary Product Material: Brass Clamping Diameter Range: 6 – 11 mm Primary Product Plating Material: Nickel Outer Thread Size: M20 x 1.5 Ventilated Cable Gland Brass 6 – 11 mm Nickel | Ventilation Cable Gland | Part Number: 2490540-8 | Internal Number: 2490540-8 | TE Connectivity RoHS : Compliant |
| 282 | ||
| 1-2490541-7 | TE Connectivity | VENT CG,PA6,PG13.5,6-12,9,LGR Cable Gland Product Type: Ventilated Cable Gland Primary Product Material: PA 6 Clamping Diameter Range: 6 – 12 mm Primary Product Color: Light Gray Outer Thread Size: PG13.5 Ventilated Cable Gland PA 6 6 – 12 mm Light Gray | Ventilation Cable Gland | Part Number: 1-2490541-7 | Internal Number: 1-2490541-7 | TE Connectivity RoHS : Compliant |
| 190 | ||
| 2490540-1 | TE Connectivity | VENT CG,BRASS,M12,2-6,8 Cable Gland Product Type: Ventilated Cable Gland Primary Product Material: Brass Clamping Diameter Range: 2 – 6 mm Primary Product Plating Material: Nickel Outer Thread Size: M12 x 1.5 Ventilated Cable Gland Brass 2 – 6 mm Nickel | Ventilation Cable Gland | Part Number: 2490540-1 | Internal Number: 2490540-1 | TE Connectivity RoHS : Compliant |
| 78 | ||
| 1-2149490-5 | TE Connectivity | SFP+ Assy 2x8 EMI Spg 4 Lp Sn Enhanced Pluggable Form Factor: SFP+ Pluggable I/O Product Type: Cage Assembly with Integrated Connector Centerline (Pitch): .8 mm Centerline (Pitch): .032 in Sealable: No SFP+ Cage Assembly with Integrated Connector .8 mm .032" | High Speed I/o | Part Number: 1-2149490-5 | Internal Number: 1-2149490-5 | TE Connectivity RoHS : Compliant |
| 67 | ||
| 2490540-7 | TE Connectivity | VENT CG,BRASS,M20,5-9,8 Cable Gland Product Type: Ventilated Cable Gland Primary Product Material: Brass Clamping Diameter Range: 5 – 9 mm Primary Product Plating Material: Nickel Outer Thread Size: M20 x 1.5 Ventilated Cable Gland Brass 5 – 9 mm Nickel | Ventilation Cable Gland | Part Number: 2490540-7 | Internal Number: 2490540-7 | TE Connectivity RoHS : Compliant |
| 35 | ||
![]() Vyrian | 1434905 | Phoenix Contact | Cables/Accessories RoHS : Compliant | 10,048 | ||
| 1-2149490-5 | TE Connectivity | Connector Accessory, Nickel Silver Alloy RoHS : Compliant | 9,623 | |||
| 1654905 | Phoenix Contact | Fiber Optic Connector, 200/230um, Multi Mode, Simplex, Plug RoHS : Compliant | 8,801 | |||
LM4905MM![]() | Texas Instruments | Audio Amplifier, 1.07W, 1 Channel(s), 1 Func, PDSO8 | 8,286 | |||
| MC34905CS3EK | NXP Semiconductors | Support Circuit, 1-Trnsvr, CMOS, PDSO32 RoHS : Compliant | 7,205 | |||
| L4905 | STMicroelectronics | RoHS : Not Compliant | 7,065 | |||
| CT324905 | Micron Technology, Inc | 6,781 | ||||
TLE4905GNTSA1![]() | Infineon Technologies AG | Analog Circuit, 1 Func, BIPolar, PSSO3 | 6,519 | |||
| 1749052 | Phoenix Contact | Barrier Strip Terminal Block, 41A, 6mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,769 | |||
| CT490579 | Micron Technology, Inc | 4,710 | ||||
| 1844905 | Phoenix Contact | Barrier Strip Terminal Block, 6A, 0.5mm2, 2 Row(s), 2 Deck(s) RoHS : Compliant | 4,217 | |||
| LM4905LQ | Texas Instruments | Audio Amplifier, 1.07W, 1 Channel(s), 1 Func | 4,100 | |||
| NTD4905NT4G | onsemi | Power Field-Effect Transistor, 12A I(D), 30V, 0.007ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 3,980 | |||
SST38VF6404-90-5C-EKE![]() | Microchip Technology Inc | Flash, 4MX16, 90ns, PDSO48 RoHS : Compliant | 3,189 | |||
| MC34905CS5EK | NXP Semiconductors | Support Circuit, 1-Trnsvr, CMOS, PDSO32 RoHS : Compliant | 2,589 | |||
![]() Win Source Electronics | IRF4905![]() | International Rectifier | Power MOSFET(Vdss=-55V, Rds(on)=0.02ohm, Id=-74A) RoHS : Not Compliant |
| 83,004 | |
| IRF4905PBF | Infineon Technologies AG | MOSFET P-CH 55V 74A TO-220AB RoHS : Compliant |
| 75,620 | ||
| IRF4905STRLP | UMW | MOSFET P-CH 55V 42A D2PAK |
| 44,320 | ||
IRF4905S![]() | International Rectifier | Power MOSFET(Vdss=-55V, Rds(on)=0.02ohm, Id=-74A) RoHS : Not Compliant |
| 36,884 | ||
| IRF4905STRLPBF | Infineon Technologies AG | MOSFET P-CH 55V 42A D2PAK RoHS : Compliant |
| 36,000 | ||
| IRF4905STRPBF | VBsemi Electronics Co Ltd | P-mosfet Transistor; D2PAK(TO-263); -60V; -110A; 272W |
| 35,220 | ||
| IRF4905SPBF | Infineon Technologies AG | MOSFET P-CH 55V 42A D2PAK RoHS : Compliant |
| 34,800 | ||
| IRF4905STRRPBF | Infineon Technologies AG | Advanced Process Technology | MOSFET P-CH 55V 42A D2PAK RoHS : Compliant |
| 34,390 | ||
| IRF4905STR | Infineon Technologies AG | P-Channel -55V -74A 200W Surface Mount D2PAK |
| 22,410 | ||
| IRF4905SHR | Infineon Technologies AG | Trans MOSFET P-CH Si 55V 74A 3-Pin(2+Tab) D2PAK T/R |
| 10,390 | ||
| IRF4905LPBF | Infineon Technologies AG | MOSFET P-CH 55V 42A TO-262 RoHS : Compliant |
| 9,730 | ||
| TLE4905L | Siemens | Uni- and Bipolar Hall IC Switches for Magnetic Field Applications / Hall Effect Sensor 100mA Unipolar 5V/9V/12V/15V/18V Automotive 3-Pin SSO Ammo |
| 2,850 | ||
| AUIRF4905S | Infineon Technologies AG | MOSFET P-CH 55V 42A D2PAK RoHS : Compliant |
| 1,000 | ||
| AUIRF4905STRL | Infineon Technologies AG | MOSFET P-CH 55V 42A D2PAK RoHS : Compliant |
| 252 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |