| Electronic Components Datasheet Search |
|
4873 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 487378-5 | TE Connectivity | Connector: FFC/FPC; data; 1.5A,2A; 300V; PIN: 6; straight; -65÷105°C RoHS : Compliant |
| 4,225 | |
| 34873-2001 | Molex | 34873-2001 |
| 2,592 | ||
| 1924487-3 | TE Connectivity | Secondary lock; black RoHS : Compliant |
| 565 | ||
| 84873021 | Crouzet | Voltage monitoring relay; phase sequence,phase failure; IP20 RoHS : Compliant |
| 4 | ||
| 84873023 | Crouzet | Voltage monitoring relay; for DIN rail mounting; M; SPDT; IP20 RoHS : Compliant |
| 4 | ||
| 84873222 | Crouzet | Voltage monitoring relay; undervoltage,overvoltage; M; SPDT RoHS : Compliant |
| 4 | ||
| 84873024 | Crouzet | Voltage monitoring relay; for DIN rail mounting; M; SPDT; IP20 RoHS : Compliant |
| 2 | ||
| 84873022 | Crouzet | Voltage monitoring relay; phase sequence,phase failure; M; SPDT RoHS : Compliant |
| 2 | ||
| 4873 | Keystone Electronics Corp | Screwed spacer sleeve; 6.35mm; Int.thread: UNC2-56; cylindrical |
| 0 | ||
| 86093487313755ELF | Amphenol Communications Solutions | Connector: DIN 41612; male; data; PIN: 48; angled; THT RoHS : Compliant |
| 0 | ||
| 10054873 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 54; THR,THT; 3A |
| 0 | ||
| 0603WAF4873T5E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 487kΩ; SMD; 0603; 100mW; ±1%; 75V; -55÷125°C RoHS : Compliant |
| 0 | ||
| 1210W2F4873T5E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 487kΩ; SMD; 1210; 500mW; ±1%; 200V; -55÷125°C RoHS : Compliant |
| 0 | ||
| 2748730000 | Weidmüller Interface GmbH & Co. KG | Connector: HDC; female; crimped; industrial RoHS : Compliant |
| 0 | ||
| ERA8XEB4873V | Panasonic Electronic Components | Resistor: thin film; 487kΩ; SMD; 1206; 250mW; ±0.1%; ERA8X; 25ppm/°C |
| 0 | ||
![]() Verical | 487378-8 | TE Connectivity | Conn Housing RCP 9 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 50,171 | |
| 487378-8 | TE Connectivity | Conn Housing RCP 9 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 24,283 | ||
| 487378-3 | TE Connectivity | Conn Housing RCP 4 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 22,450 | ||
| 487378-5 | TE Connectivity | Conn Housing RCP 6 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 22,329 | ||
| 487378-1 | TE Connectivity | Conn Housing RCP 2 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 6,800 | ||
| 487378-5 | TE Connectivity | Conn Housing RCP 6 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 3,875 | ||
| 487378-2 | TE Connectivity | Conn Housing RCP 3 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 2,200 | ||
| 487378-9 | TE Connectivity | Conn Housing RCP 10 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 1,750 | ||
| 487378-9 | TE Connectivity | Conn Housing RCP 10 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 1,440 | ||
| 487378-8 | TE Connectivity | Conn Housing RCP 9 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 1,200 | ||
| 487378-9 | TE Connectivity | Conn Housing RCP 10 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 906 | ||
| 487378-5 | TE Connectivity | Conn Housing RCP 6 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 350 | ||
| 487378-5 | TE Connectivity | Conn Housing RCP 6 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 350 | ||
| 487378-7 | TE Connectivity | Conn Housing RCP 8 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 350 | ||
| 487378-6 | TE Connectivity | Conn Housing RCP 7 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 75 | ||
![]() Avnet Americas | 86093487313H55ELF | Amphenol Corporation | - Trays (Alt: 86093487313H55ELF) RoHS : Compliant |
| 352 | |
| 86093487313755ELF | Amphenol Corporation | - Trays (Alt: 86093487313755ELF) RoHS : Compliant |
| 260 | ||
| RL0503-1248-73-MS | Amphenol Corporation | - Bulk (Alt: RL0503-1248-73-MS) RoHS : Compliant |
| 48 | ||
| RLR07C4873FRBSL | Vishay Intertechnologies | - Bulk (Alt: RLR07C4873FRBSL) RoHS : Not Compliant |
| 0 | ||
| RLR32C4873FPB14 | Vishay Intertechnologies | Through Hole Resistor, 487 kohm, RLR Series, 1 W, ? 1%, Axial Leaded, 500 V, Metal Film, ? 100ppm/?C - Bulk (Alt: RLR32C4873FPB14) RoHS : Not Compliant |
| 0 | ||
| RN55C4873FRE7 | Vishay Intertechnologies | - Tape and Reel (Alt: RN55C4873FRE7) RoHS : Not Compliant |
| 0 | ||
| RN60C4873BRE5 | Vishay Intertechnologies | - Tape and Reel (Alt: RN60C4873BRE5) RoHS : Not Compliant |
| 0 | ||
| RN60D4873FRE6 | Vishay Intertechnologies | - Tape and Reel (Alt: RN60D4873FRE6) RoHS : Not Compliant |
| 0 | ||
| 514873-1 | TE Connectivity | - Bulk (Alt: 514873-1) RoHS : Compliant | 0 | |||
| M-0402K4873FSTF | Vishay Intertechnologies | M-0402 100PPM 487K 1% S TF e3 - Tape and Reel (Alt: M-0402K4873FSTF) RoHS : Compliant |
| 0 | ||
| ERJ-P14D4873U | Panasonic Electronic Components | SMD Chip Resistor, 487 kohm, ? 0.5%, 500 mW, 1210 [3225 Metric], Thick Film, High Power, Anti-Surge - Tape and Reel (Alt: ERJ-P14D4873U) |
| 0 | ||
| 487378-9 | TE Connectivity | - Bulk (Alt: 487378-9) RoHS : Compliant |
| 0 | ||
| NTRH10F4873CTRF | NIC Components Corp | SMD Chip Resistor, 487 kOhm, ? 1%, 125 mW, 0805 [2012 Metric], Thin Film, High Power, NTRH Series - Tape and Reel (Alt: NTRH10F4873CTRF) RoHS : Compliant |
| 0 | ||
| PLT1206Z4873ABWS | Vishay Intertechnologies | SMD Chip Resistor, 487 kohm, ? 0.05%, 400 mW, 1206 [3216 Metric], Thin Film, Precision, PLT Series - Waffle Pack (Alt: PLT1206Z4873ABWS) RoHS : Not Compliant |
| 0 | ||
| PLT1206Z4873BST0 | Vishay Intertechnologies | SMD Chip Resistor, 487 kohm, ? 0.1%, 400 mW, 1206 [3216 Metric], Thin Film, Precision, PLT Series - Tape and Reel (Alt: PLT1206Z4873BST0) RoHS : Compliant |
| 0 | ||
![]() Arrow Electronics | 487378-6 | TE Connectivity | Conn Housing RCP 7 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 12,715 | |
| 487378-3 | TE Connectivity | Conn Housing RCP 4 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 5 | ||
![]() Newark | ERJP06F4873V | Panasonic Electronic Components | Res, 487K, 1%, 0.5W, 0805, Thick Film; |Panasonic ERJP06F4873V RoHS : Compliant |
| 7,769 | |
| ERJP06F4873V | Panasonic Electronic Components | Res, 487K, 1%, 0.5W, 0805, Thick Film; |Panasonic ERJP06F4873V RoHS : Compliant |
| 7,769 | ||
| MP014873 | SPC Multicomp | Conn, Hdr, 6Pos, 1Row, 1.25Mm, Smd; |Multicomp Pro MP014873 RoHS : Compliant |
| 3,600 | ||
| ERJPA3F4873V | Panasonic Electronic Components | Res, 487K, 1%, Thick Film; |Panasonic ERJPA3F4873V RoHS : Compliant |
| 1,435 | ||
| ERJPA3F4873V | Panasonic Electronic Components | Res, 487K, 1%, Thick Film; |Panasonic ERJPA3F4873V RoHS : Compliant |
| 1,435 | ||
| 86093487313745ELF | Amphenol Communications Solutions | Conn, Din 41612, R/A Header, 48Pos, 3Row; |Amphenol Communications Solutions 86093487313745ELF RoHS : Compliant |
| 666 | ||
| TW-05-12-G-S-487-312 | Samtec Inc | Conn Stack Brd, 2Mm, 5Pos, Hdr; |Samtec, Inc. TW-05-12-G-S-487-312 RoHS : Compliant |
| 640 | ||
| 1714873 | Phoenix Contact | Btb Connector, Rcpt, 26Pos, 2Row, 1.27Mm; |Phoenix Contact 1714873 RoHS : Compliant |
| 456 | ||
| 744873100 | Wurth Elektronik | Inductor, 10Uh 20%, 3.81A, Dd 1280; |Würth Elektronik 744873100 RoHS : Compliant |
| 359 | ||
| 744873100 | Wurth Elektronik | Inductor, 10Uh 20%, 3.81A, Dd 1280; |Würth Elektronik 744873100 RoHS : Compliant |
| 359 | ||
| 33348730 | Aptiv PLC | Automotive Housing, Rcpt, 15Pos; |Aptiv/delphi 33348730 RoHS : Compliant |
| 300 | ||
| 84873029 | Crouzet | Phase Monitoring Relay, Spdt, 8A, Din; |Crouzet 84873029 RoHS : Compliant |
| 60 | ||
| 9071.99.0548 (73"Z-0-0-548) | HUBER+SUHNER | Gas Discharge Tube, 90V, Smd, 20Ka; |Huber+Suhner 9071.99.0548 (73"Z-0-0-548) RoHS : Compliant |
| 17 | ||
| 4873 | Keystone Electronics Corp | Standoff, Steel, Swage F, 2-56, 6.35Mm; |Keystone 4873 RoHS : Compliant |
| 0 | ||
| 4873 | Adafruit Industries | 2.5Mm Pitch 3-Pin Cable Matching Pair - Jst Xh Compatible |Adafruit 4873 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | DS17487-3+ | Analog Devices Inc | 3V/5V Real-Time Clocks RoHS : Compliant |
| 694 | |
| DS17487-3IND+ | Analog Devices Inc | 3V/5V Real-Time Clocks RoHS : Compliant |
| 672 | ||
![]() RS | 671RZ10 (784337 48731) | Marathon Special Products | CONN TERM STRIP BARRIER 10 7/16 IN PITCH DBL ROW 20A 300V THERMOPLASTIC |
| 3,610 | |
| 84873029 | Crouzet | PHASE MONITORING RELAY, DIN RAIL, SPDT, SCREW TERMINAL, 8A, 480VAC, MWS SERIES RoHS : Compliant |
| 953 | ||
| RL0503-1248-73-MS | Amphenol Advanced Sensors | THERMISTOR, NTC:RES 2 KILOHMS, RADIAL, DISC, EPOXY COATED |
| 550 | ||
| 66254487397 | Norton Winter | DURITE PAPER SHEET P180 GRIT A475 SC, 9 X 11 IN. |
| 100 | ||
| 66254487398 | Norton Winter | DURITE PAPER SHEET, NO FILLL, P220 GRIT, A475 SC, 9 X 11 IN. |
| 84 | ||
| 66254487393 | Norton Winter | DURITE PAPER SHEET P80 GRIT A475 SC, 9 X11 IN. |
| 50 | ||
| DP270-CLEAR-48.5ML (7100148730) | 3M | EPOXY POTTING COMPOUND, PASTE, CLEAR, 48.5ML, DUO-PACK, 60-MINUTE WORK TIME |
| 39 | ||
| 671RZ12 (784337 48737) | Marathon Special Products | CONN TERM STRIP BARRIER 12 7/16 IN PITCH DBL ROW 20A 300V THERMOPLASTIC |
| 30 | ||
| 1464873 | RS Pro | SLOTTED WIRE DUCT PVC 6FT X 3IN X 4IN 0.2IN (5MM) SLOT WIDTH RAL7030 |
| 21 | ||
| 84873023 | Crouzet | RELAY, E-MECH, 3-PHASE MONITOR, 5A, CTRL-V 480VAC, 250VAC, DIN RAIL MOUNT RoHS : Compliant |
| 13 | ||
| 48-73-1100 | Milwaukee Electric Tool Corporation | FRONT BRIM HARD HAT WITH 4PT RATCHETING SUSPENSION (USA) |
| 5 | ||
| 2454873 (25532673) (SSCFIA0310062-100RS) | RS Pro | SCREW, 5/16-24 X 5/8 SOCKET SET SCREW-CUP POINT PLAIN FINISH |
| 3 | ||
| MS6N-LWS-1/2-U-V (564873) | Festo | WATER SEPARATOR, AIRLINE, SZ 6, 1/2NPT, METAL BOWL, AUTO DRAIN |
| 2 | ||
| 2154873 | RS Pro | IEC PTFE TWIN TWISTED THERMOCOUPLE CABLE |
| 1 | ||
| 4873 | Adafruit Industries | 2.5MM PITCH 3-PIN CABLE MATCHING PAIR - JST XH COMPATIBLE |
| 0 | ||
![]() Future Electronics | 4873 | Keystone Electronics Corp | Round Standoff Threaded #2-56 Steel 0.250" (6.35mm) 1/4" RoHS : Compliant |
| 0 | |
![]() Onlinecomponents.com | 121575-4873 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 14S-6 - Sockets - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Compliant |
| 0 | |
| D8-4873 | L-com Inc | SWITCH BOX DB25 A-D 4 WAY RoHS : Compliant |
| 0 | ||
| 3-4873-2025DN | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 3-4873-2075DN | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 3-4873-2012DN | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 3-4873-26D6DN | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 3-4873-2170DN | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 3-4873-2048DN | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 3-4873-2088DN | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 3-4873-2011DN | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 3-4873-27D8DN | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 3-4873-2211DN | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| PFC-W1206LF-03-4873-A | TT Electronics Resistors | RoHS : Compliant |
| 0 | ||
| 3-4873-2143DN | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 3-4873-2031DN | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | NTMS4873NFR2G![]() | onsemi | Power MOSFET 30V 11.7A 12 mOhm Dual N-Channel SO-8 with Schottky Diode RoHS : Compliant |
| 66,286 | |
LM4873MTEX/NOPB![]() | Texas Instruments | Audio Amplifier Class AB 2-Channel (Stereo) with Stereo Headphones 2.6W, 3W 20-SOP T/R RoHS : Compliant |
| 22,118 | ||
TPS54873PWP![]() | Texas Instruments | IC VOLT REG Adjustable Step-Down Buck 1 OUT 900mV - 3.3V 8A 28-SOP Tube RoHS : Compliant |
| 4 | ||
LM4873MTE/NOPB![]() | Texas Instruments | Audio Amplifier Class AB 2-Channel (Stereo) with Stereo Headphones 2.6W, 3W 20-SOP T/R RoHS : Compliant |
| 1,891 | ||
| LM4873LQ | National Semiconductor Corporation | Audio Amplifier, 3W, 2 Channel(s), 1 Func RoHS : Not Compliant |
| 5,000 | ||
| LM4873MT/NOPB | National Semiconductor Corporation | Audio Amplifier, 1.9W, 2 Channel(s), 1 Func, PDSO20 RoHS : Compliant |
| 40 | ||
| LM4873MTE | National Semiconductor Corporation | Audio Amplifier, 2.2W, 2 Channel(s), 1 Func, PDSO20 RoHS : Not Compliant |
| 145 | ||
| LM4873MTE-1 | National Semiconductor Corporation | Audio Amplifier, 3W, 2 Channel(s), 1 Func, PDSO28 RoHS : Not Compliant |
| 15,132 | ||
| LM4873MTE/NOPB | National Semiconductor Corporation | Audio Amplifier Class AB 2-Channel (Stereo) with Stereo Headphones 2.6W, 3W 20-SOP T/R RoHS : Compliant |
| 1,834 | ||
![]() Sager | TW-05-12-G-S-487-312 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 640 | |
| 4873 | Keystone Electronics Corp | Standoffs & Spacers SM STANDOFF ON TAPE AND REEL |
| 0 | ||
| BA2-X0-04-873-211-D | Carling Technologies | Circuit Breakers | 0 | |||
| 514873-1 | TE Connectivity | Heavy Duty Power Connectors SICHERHEITSSCHALTER | 0 | |||
| TFR1206AHG4873NR | Littelfuse Inc | TFR 1206 25PPM 0.25W 487K OHM�0.05% |
| 0 | ||
| 487378-9 | TE Connectivity | FFC & FPC Connectors FFC HSG RECPT 9P RoHS : Compliant |
| 0 | ||
| 55A4873-22-A063 | TE Connectivity | TE Connectivity | 0 | |||
| 487378-3 | TE Connectivity | FFC & FPC Connectors REC 1X04P 100X100 HSG RoHS : Compliant |
| 0 | ||
| 644873-3 | TE Connectivity | Headers & Wire Housings 17P MTA156 HDR ASSY W/O#14 RoHS : Compliant | 0 | |||
| R51-0..S00448737 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| TFR1206BFG4873NR | Littelfuse Inc | TFR 1206 10PPM 0.25W 487K OHM�0.1% |
| 0 | ||
| 1-487378-9 | TE Connectivity | FFC & FPC Connectors 100X100 FFC HSG REC 1X20P RoHS : Compliant |
| 0 | ||
| 1404873 | Phoenix Contact | Ethernet Cables / Networking Cables SAC-M12MS/15,0-94B/ M12MS RoHS : Compliant | 0 | |||
| TFR1206BHG4873NR | Littelfuse Inc | TFR 1206 25PPM 0.25W 487K OHM�0.1% |
| 0 | ||
| 4873AB51K01200 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding GK,NiCu,NRS,PU,V0,Cst | 0 | |||
![]() ComSIT USA | 744873470 | Wurth Elektronik | AVAILABLE EU RoHS : Compliant | 3,000 | ||
| 86093487394755E1LF | Amphenol FCi | AVAILABLE EU | 3,143 | |||
![]() ComSIT USA | 1,14873E+15 | PRECI-DIP SSA | IC Socket, DIP8, 8 Contact(s), 2.54mm Term Pitch, 7.62mm Row Spacing, Surface Mount RoHS : Not Compliant | 1,132 | ||
| DS174873+ | Maxim Integrated Products | Real Time Clocks Clock/Calendar Parallel 24-DIP Tube RoHS : Compliant | 10 | |||
![]() Interstate Connecting Components | 487378-3 | TE Connectivity | 004 HOUSING FFC RCPT 100CL SR RoHS : Compliant |
| 4,104 | |
| 1-487378-9 | TE Connectivity | 020 HOUSING FFC RCPT 100CL SR RoHS : Compliant |
| 29 | ||
| 60384873 | WAGO Innovative Connections | EMD 40215646 |
| 2 | ||
| 11-18-4873 | Molex | 60800A128 INSULATION PUNCH * |
| 1 | ||
| 487378-9 | TE Connectivity | 010 HOUSING FFC RCPT 100CL SR RoHS : Compliant |
| 0 | ||
| 86093487313H65E1LF | Amphenol FCi | 86093487313H65E1LF-DIN HEADER RoHS : Compliant |
| 0 | ||
| 2176487-3 | TE Connectivity | BMC 0805 80R 25% A MED C | 0 | |||
| T3487300U | Amphenol Sine Systems | FEMALE RECEPTACLE FRONT MOUNT | 0 | |||
| 86093487394755E1LF | Amphenol FCi | 86093487394755E1LF-DIN HEADER |
| 0 | ||
| 2823487-3 | TE Connectivity | 3P,2MM,BRK HDR,SRRT,2.8,0.38AU RoHS : Compliant | 0 | |||
| 86093487313745ELF | Amphenol FCi | 86093487313745ELF-DIN TYPEC2 R RoHS : Compliant | 0 | |||
| 86093487313H55UPLF | Amphenol FCi | 86093487313H55UPLF-DIN TYPE C2 RoHS : Compliant | 0 | |||
| 2-487378-1 | TE Connectivity | 022 HOUSING FFC RCPT 100CL SR RoHS : Compliant |
| 0 | ||
| 714873-1 | TE Connectivity | 971 23B 127 | 0 | |||
| 204873-4 | TE Connectivity | 5009-329-0022 RoHS : Compliant |
| 0 | ||
![]() NexGen Digital | PFR03Q-4873-BNH-01 | Cyntech Inc | 216 | |||
![]() PEI Genesis | 10-564873-AFS | Amphenol Corporation |
| 0 | ||
![]() Powell Electronics | 487378-3 | TE Connectivity | 004 HOUSING FFC RCPT 100CL SR RoHS : Compliant |
| 87,120 | |
| 487378-8 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 49,932 | ||
| 6014873001 | TE Connectivity | Connectors RoHS : Compliant |
| 34,007 | ||
| 1-487378-0 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 15,820 | ||
| 487378-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 12,387 | ||
| 204873-4 | TE Connectivity | ARINC RoHS : Compliant |
| 2,156 | ||
| 644487-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 2,075 | ||
| 487378-9 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1,756 | ||
| 2-487378-5 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1,142 | ||
| TW-05-12-G-S-487-312 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 422 | ||
| 86093487313765E1LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 95 | ||
| 86093487313H55ELF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 18 | ||
| EK4873-000 | TE Connectivity | backshells, RoHS : Compliant |
| 13 | ||
| 721487-3 | TE Connectivity | WIRE CRIMPER |
| 1 | ||
| 5-1589487-3 | TE Connectivity | D-Sub Connectors RoHS : Not Compliant |
| 1 | ||
![]() Chip 1 Exchange | 487378-8 | TE Connectivity | INSTOCK RoHS : Compliant | 101,340 | ||
| 34873-1009 | Molex | INSTOCK | 45,110 | |||
| 0402WGF4873TCE | ROYAL | INSTOCK | 38,740 | |||
| 34873-2003 | Molex | INSTOCK | 38,188 | |||
| 1-487378-0 | TE Connectivity | INSTOCK RoHS : Compliant | 32,424 | |||
| 487378-5 | TE Connectivity | INSTOCK RoHS : Compliant | 27,072 | |||
| 0805S8F4873T5E | ROYAL | INSTOCK | 13,260 | |||
| 1-487378-9 | TE Connectivity | INSTOCK RoHS : Compliant | 10,760 | |||
| MMA02040C4873F##00 | Vishay Intertechnologies | INSTOCK | 7,086 | |||
| 0603SAF4873T5E | ROYAL | INSTOCK | 4,784 | |||
| 614-87-308-41-001101 | INSTOCK | 3,569 | ||||
| 860934873137550000- | Amphenol FCi | INSTOCK | 400 | |||
| 86093487313755000E1 | Dynamode | INSTOCK | 305 | |||
| RK73H2BTTD4873F | KOA Speer Electronics Inc | INSTOCK RoHS : Compliant | 200 | |||
| 15487347 | INSTOCK | 73 | ||||
![]() Avnet Abacus | 114-87-308-41-134161 | PRECI-DIP SSA | Conn DIP Socket Receptacle 8 POS 254mm Solder ST SMD (Alt: 114-87-308-41-134161) RoHS : Compliant | 16,016 | ||
| 86093487313755ELF | Amphenol Corporation | Conn DIN 41612 Header 48 POS 254mm Solder RA Through Hole (Alt: 86093487313755ELF) RoHS : Compliant | 672 | |||
| 1374873 | Phoenix Contact | Conn Socket Strip Receptacle 12 POS 127mm Solder ST SMD (Alt: 1374873) RoHS : Compliant | 560 | |||
| 487378-9 | TE Connectivity | Conn Housing RCP 10 POS 254mm Crimp ST Cable Mount (Alt: 487378-9) RoHS : Compliant | 0 | |||
| 487378-9 | TE Connectivity | Conn Housing RCP 10 POS 254mm Crimp ST Cable Mount (Alt: 487378-9) RoHS : Compliant | 0 | |||
| 487378-3 | TE Connectivity | Conn Housing RCP 4 POS 254mm Crimp ST Cable Mount (Alt: 487378-3) RoHS : Compliant | 0 | |||
| 487378-3 | TE Connectivity | Conn Housing RCP 4 POS 254mm Crimp ST Cable Mount (Alt: 487378-3) RoHS : Compliant | 0 | |||
| 33348730 | Aptiv PLC | Conn Housing Sealed RCP 15 POS 64mm ST Cable Mount (Alt: 33348730) RoHS : Compliant | 0 | |||
| ERJ8ENF4873V | Panasonic Electronic Components | SMD Chip Resistor 487 kohm 1 250 mW 1206 3216 Metric Thick Film - Tape and Reel (Alt: ERJ8ENF4873V) RoHS : Compliant | 0 | |||
| CR0603-FX-4873ELF | Bourns Inc | - Tape and Reel (Alt: CR0603-FX-4873ELF) RoHS : Compliant | 0 | |||
| CR0402-FX-4873GLF | Bourns Inc | - Tape and Reel (Alt: CR0402-FX-4873GLF) RoHS : Compliant | 0 | |||
| 03006-1248-73-G100 | Amphenol Corporation | Thermistor NTC 2KOhm 10 2Pin SOD80 TR (Alt: 03006-1248-73-G100) RoHS : Compliant | 0 | |||
| MCT06030C4873FP500 | Vishay Intertechnologies | - Tape and Reel (Alt: MCT06030C4873FP500) RoHS : Compliant | 0 | |||
| 114-87-306-41-134161 | PRECI-DIP SSA | Conn DIP Socket SKT 6 POS 254mm Solder ST SMD (Alt: 114-87-306-41-134161) RoHS : Compliant | 0 | |||
| 114-87-328-41-134161 | PRECI-DIP SSA | Conn DIP Socket SKT 28 POS 254mm Solder ST SMD (Alt: 114-87-328-41-134161) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 2487344-2 | TE Connectivity | QSFP 112G, 26AWG DSD 1.0M (Alt: 2487344-2) RoHS : Compliant | 0 | ||
| 86093487313H55ELF | Amphenol Corporation | (Alt: 86093487313H55ELF) RoHS : Compliant | 0 | |||
| 86093487313H55HTLF | Amphenol Corporation | FCI86093487313H55HTLF D-SUB CONNECTOR (Alt: 86093487313H55HTLF) RoHS : Compliant | 0 | |||
| 487378-6 | TE Connectivity | (Alt: 487378-6) RoHS : Compliant | 0 | |||
| MCT06030E4873BP500 | Vishay Intertechnologies | (Alt: MCT06030E4873BP500) RoHS : Compliant | 0 | |||
| 2-644487-3 | TE Connectivity | (Alt: 2-644487-3) RoHS : Compliant | 0 | |||
| 1-487378-5 | TE Connectivity | (Alt: 1-487378-5) RoHS : Compliant | 0 | |||
| 86093487313755ELF | Amphenol Corporation | (Alt: 86093487313755ELF) RoHS : Compliant | 0 | |||
| 2-487378-1 | TE Connectivity | (Alt: 2-487378-1) RoHS : Compliant | 0 | |||
| 284873-1 | TE Connectivity | (Alt: 284873-1) RoHS : Compliant | 0 | |||
![]() Chip-Germany GmbH | 487378-4 | TE Connectivity | RoHS : Compliant | 31 | ||
![]() Component Electronics, Inc | CR0805F4873T1LF | Chip Technologies Inc | IN STOCK SHIP TODAY |
| 55,000 | |
| CR32A4873FT | IBS Electronics Inc | IN STOCK SHIP TODAY RoHS : Unknown |
| 9,000 | ||
| CR1206F4873T1LF | Chip Technologies Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 5,000 | ||
| MF25C4873FT | IBS Electronics Inc | IN STOCK SHIP TODAY RoHS : Unknown |
| 5,000 | ||
| CRCW06034873FRT1 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4,730 | ||
| MCR03EZHF4873 | ROHM Semiconductor | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,500 | ||
| CR16-4873FM | Chip Technologies Inc | IN STOCK SHIP TODAY |
| 3,500 | ||
| 2322-704-64873L | YAGEO Corporation | IN STOCK SHIP TODAY |
| 1,900 | ||
| 9T06031A4873BAHFT | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,600 | ||
| CRCW12064873FRT1 | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 400 | ||
| RM06F4873CT | Cal-Chip Electronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 110 | ||
| RN55D4873F | CGW | IN STOCK SHIP TODAY |
| 70 | ||
| 487378-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 69 | ||
| RM10F4873CT | Cal-Chip Electronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 30 | ||
TPS54873PWP![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 11 | ||
![]() DB Roberts | 14873 | Heyco | BRASS CGC M75-630X11MMTHD | 0 | ||
| 48733 | Avdel | SCREW 117773 | 0 | |||
| 1284873 | Essentra Components | 0 | ||||
| 487300 | Essentra Components | HANDLE, GRAB - 300MM LENGTH - | 0 | |||
| M4873 | Heyco | SCG 2.375 GRAY | 0 | |||
![]() Master Electronics | 487378-3 | TE Connectivity | 004 HOUSING FFC RCPT 100CL SR RoHS : Compliant |
| 22,487 | |
| 487378-9 | TE Connectivity | 010 HOUSING FFC RCPT 100CL SR RoHS : Compliant |
| 2,661 | ||
| 84873023 | Crouzet | Electromechanical Relay 208/480VAC 5A SPDT (92.6x17.5x69)mm DIN Rail Control Relay RoHS : Compliant |
| 17 | ||
| BA2-X0-04-873-211-D | Carling Technologies | Circuit Breaker B-Series Hydraulic-Magnetic | Carling Technologies BA2-X0-04-873-211-D RoHS : Compliant |
| 7 | ||
| ERJ-P14D4873U | Panasonic Electronic Components | Res Thick Film 1210 487K Ohm 0.5% 0.5W(1/2W) ±100ppm/°C Pad SMD Automotive T/R RoHS : Compliant |
| 0 | ||
| TW-05-12-G-S-487-312 | Samtec Inc | Stacking Board Connector TW Series 5 Contacts Header 2 mm Through Hole 1 Rows RoHS : Compliant |
| 0 | ||
| CR0603-FX-4873ELF | Bourns Inc | Thick Film Chip Resistor - 1/10 W - 487 Kohm ±1% - ±100ppm/°C - SMD 0603 - RoHS Compliant - Tape&Reel RoHS : Compliant |
| 0 | ||
| ERA-8XEB4873V | Panasonic Electronic Components | 1206 THIN FILM RES 750V 487KOhm RoHS : Compliant |
| 0 | ||
| ERJ-1TNF4873U | Panasonic Electronic Components | Res Thick Film 2512 487K Ohm 1% 1W ±100ppm/°C Pad SMD Automotive T/R RoHS : Compliant |
| 0 | ||
| CR0402-FX-4873GLF | Bourns Inc | Thick Film Chip Resistor - 1/16 W - 487 Kohm ±1% - ±100ppm/°C - SMD 0402 - RoHS Compliant - Tape&Reel RoHS : Compliant |
| 0 | ||
| ERJ-S1DF4873U | Panasonic Electronic Components | Res Thick Film 2010 487K Ohm 1% 0.75W(3/4W) A±100ppm/A°C Sulfur Resistant Pad SMD Automotive T/R RoHS : Compliant |
| 0 | ||
| ERJ-U08D4873V | Panasonic Electronic Components | Anti-Sulfur Thick Film Resistor - 487 Kohm - ±0.5% - 0.25W - 1206 - -55°C to +155°C - AEC-Q200 - Tape&Reel RoHS : Compliant |
| 0 | ||
| 114-87-328-41-134161 | PRECI-DIP SSA | RoHS : Compliant |
| 0 | ||
| RCV-00114873 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| CRT1206-FZ-4873ELF | Bourns Inc | Thin Film Precision Chip Resistor - 1/4 W - 487 Kohm ±1% - ±50ppm/°C - 200V - SMD 1206 RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE7487-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 3 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, SMA Male to SMA Female Brass Gold Body Rated to 2 Watts Up to 26.5 GHz. PE7487-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with brass body material and gold plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 3 dB. The Pasternack PE7487-3 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 3 dB attenuator has a brass connector built with gold plating. Our fixed RF attenuator PE7487-3 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 12 | |
| PE3C8487-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 36 inches. Fire Rated 7/16 DIN Male Right Angle to N Male Low PIM Cable 36 Inch Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 7/16 DIN male right angle to N male low PIM cable 36 inch length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 7/16 DIN male right angle to N male low PIM cable 36 inch length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 7/16 DIN cable connection on one end and type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to type N cable is a male to male coax assembly, PE3C8487-36, can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to N type plug cable assembly PE3C8487-36 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN right angle male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8487-36 can also be used in the other direction and will be type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 7/16 DIN male right angle to N male low PIM cable 36 inch length using SPF-250 coax using Times Microwave parts. |
| 10 | ||
| PE3C6487-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX002, RF Cable Type: PE-SR047TNLL, RF Cable Impedance: 50 Ohm, Length: 36 inches. 1.85mm Male to 1.85mm Male Low Loss Cable 36 Inch Length Using 047 Coax., Radio frequency assembly 1.85mm male to 1.85mm male low loss cable 36 inch length using 047 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 1.85mm male to 1.85mm male low loss cable 36 inch length using 047 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our low loss 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE3C6487-36, can also be known as a low loss 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE3C6487-36 is built with PE-SR047TNLL which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 70 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male low loss cable 36 inch length using 047 coax. |
| 9 | ||
| PE3MSA00487-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. Lead Free Bend Relief 3-Lug TRB Jack with Blunt Cut for PE-30-02003, 36 Inch Cable., Radio frequency assembly lead free bend relief 3-Lug TRB jack with blunt cut for PE-30-02003, 36 inch cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free bend relief 3-Lug TRB jack with blunt cut for PE-30-02003, 36 inch cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00487-36 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00487-36 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00487-36 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free bend relief 3-Lug TRB jack with blunt cut for PE-30-02003, 36 inch cable. |
| 5 | ||
| PE7487-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 30 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, SMA Male to SMA Female Brass Gold Body Rated to 2 Watts Up to 26.5 GHz. PE7487-30 is a fixed 30 dB attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with brass body material and gold plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 30 dB. The Pasternack PE7487-30 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 30 dB attenuator has a brass connector built with gold plating. Our fixed RF attenuator PE7487-30 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 30 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE3FCA487-3M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex LC APC to SC UPC, SM OS2, 2.0mm Plenum, Yellow-3M. Pasternack’s PE3FCA487-3M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long simplex cable assembly is equipped with LC/APC to SC/UPC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA487-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA487-3M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of simplex LC/APC to SC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 1 | ||
| PE3C4873-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Jack 2 Hole Flange to Slide-On BMA Jack 2 Hole Flange Cable 60 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to slide-on BMA jack 2 hole flange cable 60 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to slide-on BMA jack 2 hole flange cable 60 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and BMA 2 hole flange cable connection on the other. Our BMA to BMA cable assemblies have a jack gender on end 1 and jack on end 2. This BMA to BMA cable is a jack to jack coax assembly, PE3C4873-60, can also be known as a BMA female to BMA female cable assembly and will be shipped same-day as it is purchased. BMA female to BMA female cable assembly PE3C4873-60 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 22 GHz maximum frequency BMA jack 2 hole flange to BMA jack 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BMA female 2 hole flange to BMA female 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to slide-on BMA jack 2 hole flange cable 60 inch length using RG405 coax. |
| 0 | ||
| PE3C4873-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 36 inches. Slide-On BMA Jack 2 Hole Flange to Slide-On BMA Jack 2 Hole Flange Cable 36 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to slide-on BMA jack 2 hole flange cable 36 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to slide-on BMA jack 2 hole flange cable 36 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and BMA 2 hole flange cable connection on the other. Our BMA to BMA cable assemblies have a jack gender on end 1 and jack on end 2. This BMA to BMA cable is a jack to jack coax assembly, PE3C4873-36, can also be known as a BMA female to BMA female cable assembly and will be shipped same-day as it is purchased. BMA female to BMA female cable assembly PE3C4873-36 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 22 GHz maximum frequency BMA jack 2 hole flange to BMA jack 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BMA female 2 hole flange to BMA female 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to slide-on BMA jack 2 hole flange cable 36 inch length using RG405 coax. |
| 0 | ||
| PE3W14873 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. TNC Male to Plug Cable Using RG188 Coax. PE3W14873 is a TNC male to FAKRA plug cable using RG188 coax. This Pasternack TNC male to FAKRA plug cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm FAKRA for connector 2. Our male TNC to plug FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14873 TNC male to FAKRA plug cable assembly is constructed with RG188 coax. | 0 | |||
| PE3W24873 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. SMA Female to BNC Female Bulkhead Cable Using PE-SR402FLJ Coax. PE3W24873 is a SMA female to BNC female bulkhead cable using PE-SR402FLJ coax. This Pasternack SMA female to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our female SMA to female BNC bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W24873 SMA female to BNC female bulkhead cable assembly is constructed with PE-SR402FLJ coax. | 0 | |||
| PE3C4873-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 24 inches. Slide-On BMA Jack 2 Hole Flange to Slide-On BMA Jack 2 Hole Flange Cable 24 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to slide-on BMA jack 2 hole flange cable 24 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to slide-on BMA jack 2 hole flange cable 24 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and BMA 2 hole flange cable connection on the other. Our BMA to BMA cable assemblies have a jack gender on end 1 and jack on end 2. This BMA to BMA cable is a jack to jack coax assembly, PE3C4873-24, can also be known as a BMA female to BMA female cable assembly and will be shipped same-day as it is purchased. BMA female to BMA female cable assembly PE3C4873-24 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 22 GHz maximum frequency BMA jack 2 hole flange to BMA jack 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BMA female 2 hole flange to BMA female 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to slide-on BMA jack 2 hole flange cable 24 inch length using RG405 coax. |
| 0 | ||
| PE38487-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length: 36 inches. QN Male to QN Male Right Angle Cable 36 Inch Length Using RG213 Coax., Radio frequency assembly QN male to QN male right angle cable 36 inch length using RG213 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to QN male right angle cable 36 inch length using RG213 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to QN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and right angle QN cable connection on the other. Our QN to right angle QN cable assemblies have a male gender on end 1 and male on end 2. This QN to QN cable is a male to male coax assembly, PE38487-36, can also be known as a QN plug to right angle QN plug cable assembly and will be shipped same-day as it is purchased. QN plug to QN plug cable assembly PE38487-36 is built with RG213 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to right angle QN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this QN male to QN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38487-36 can also be used in the other direction and will be right angle QN male to QN male cable assembly if the opposite connectivity is required. QN plug to QN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to QN cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to QN male right angle cable 36 inch length using RG213 coax. |
| 0 | ||
| PE3487-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Male Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly N male to N male cable 36 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3487-36, can also be known as a N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3487-36 is built with RG316 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 36 inch length using RG316 coax. |
| 0 | ||
| PE3C4873-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Jack 2 Hole Flange to Slide-On BMA Jack 2 Hole Flange Cable 12 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to slide-on BMA jack 2 hole flange cable 12 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to slide-on BMA jack 2 hole flange cable 12 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and BMA 2 hole flange cable connection on the other. Our BMA to BMA cable assemblies have a jack gender on end 1 and jack on end 2. This BMA to BMA cable is a jack to jack coax assembly, PE3C4873-12, can also be known as a BMA female to BMA female cable assembly and will be shipped same-day as it is purchased. BMA female to BMA female cable assembly PE3C4873-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 22 GHz maximum frequency BMA jack 2 hole flange to BMA jack 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BMA female 2 hole flange to BMA female 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to slide-on BMA jack 2 hole flange cable 12 inch length using RG405 coax. |
| 0 | ||
| PE3W04873 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female Bulkhead to Reverse Polarity SMA Male Right Angle Cable Using RG402 Coax. PE3W04873 is a reverse polarity SMA female bulkhead to reverse polarity SMA male right angle cable using RG402 coax. This Pasternack reverse polarity SMA female bulkhead to reverse polarity SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity female SMA bulkhead to reverse polarity male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04873 SMA reverse polarity female bulkhead to SMA reverse polarity male right angle cable assembly is constructed with RG402 coax. | 0 | |||
![]() Venkel Ltd. | AGCR0603-QK-4873FT | VENKEL LTD | Auto Grade Resistor;0603;1/10W;�100PPM;487K;�1% RoHS : Compliant | 0 | ||
| AGCR2512-2XK-4873FT | VENKEL LTD | Auto Grade Resistor;2512;2W;�100PPM;487K;�1% RoHS : Compliant | 0 | |||
| HPTF0805-RN-4873BT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�10PPM;487K ;�0.1% RoHS : Compliant | 0 | |||
| HPTF0805-TC-4873CT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�50PPM;487K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-10W-K-4873BT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�100PPM;487K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR1206-4W-C-4873DT | VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;487K ;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-4W-K-4873CT-1K | VENKEL LTD | Thin Film CR;1206;1/4W;�100PPM;487K ;�0.25% RoHS : Compliant | 0 | |||
| AGCR0805-RK-4873FT | VENKEL LTD | Auto Grade Resistor;0805;1/8W;�100PPM;487K;�1% RoHS : Compliant | 0 | |||
| TFCR2010-4W-K-4873CT-1K | VENKEL LTD | Thin Film CR;2010;1/4W;�100PPM;487K ;�0.25% RoHS : Compliant | 0 | |||
| CRG0402-P-4873FT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;487K ;�1% RoHS : Compliant | 0 | |||
| PWCR1210-VK-4873FT | VENKEL LTD | Pulse Withstanding CR;1210;1/2W;�100PPM;487K;�1% RoHS : Compliant | 0 | |||
| UPTF1206-8W-N-4873UT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;10PPM;487K ;�0.01% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-4873FT | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;487K;�1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-4873CT | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;487K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-8W-C-4873FT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;487K ;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | LM4873MTEX-1 | National Semiconductor Corporation | Audio Amplifier, 3W, 2 Channel(s), 1 Func, PDSO28 RoHS : Not Compliant | 15,915 | ||
DS17487-3IND![]() | Maxim Integrated Products | Real Time Clock, Non-Volatile, 1 Timer(s), CMOS, PDIP24 RoHS : Not Compliant | 11,816 | |||
| DS17487-3+ | Analog Devices Inc | Real Time Clock, Non-Volatile, 1 Timer(s), CMOS, PDIP24 RoHS : Compliant | 10,392 | |||
LM4873MWC![]() | Texas Instruments | Audio Amplifier, 1.1W, 2 Channel(s), 1 Func | 9,485 | |||
TPS54873PWP![]() | Texas Instruments | Switching Regulator, Voltage-mode, 12A, 762kHz Switching Freq-Max, PDSO28 RoHS : Compliant | 8,311 | |||
| 5962-01-048-7370 | Texas Instruments | OR Gate, TTL, CDIP14 RoHS : Not Compliant | 8,139 | |||
| LM4873MT | National Semiconductor Corporation | Audio Amplifier, 1.9W, 2 Channel(s), 1 Func, PDSO20 RoHS : Not Compliant | 8,021 | |||
| LM4873MTE | National Semiconductor Corporation | Audio Amplifier, 2.2W, 2 Channel(s), 1 Func, PDSO20 RoHS : Not Compliant | 7,719 | |||
LM4873MTEX![]() | Texas Instruments | Audio Amplifier, 2.2W, 2 Channel(s), 1 Func, PDSO20 RoHS : Not Compliant | 7,447 | |||
| 5962-01-348-7380 | Texas Instruments | Regulator, 1 Output, BIPolar RoHS : Not Compliant | 7,362 | |||
TPS54873PWPG4![]() | Texas Instruments | Switching Regulator, Voltage-mode, 12A, 762kHz Switching Freq-Max, PDSO28 RoHS : Compliant | 6,635 | |||
| 5962-01-348-7383 | Texas Instruments | Display Driver, PQCC44 RoHS : Not Compliant | 4,998 | |||
| 5962-01-151-4873 | Texas Instruments | Operational Amplifier, 1 Func, 4000uV Offset-Max, BIPolar, CDFP10 RoHS : Not Compliant | 4,467 | |||
| 5962-01-104-8731 | Texas Instruments | OTP ROM, 32X8, 40ns, TTL, PDIP16 RoHS : Not Compliant | 3,550 | |||
| LM4873MT/NOPB | National Semiconductor Corporation | Audio Amplifier, 1.9W, 2 Channel(s), 1 Func, PDSO20 RoHS : Compliant | 2,768 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |