| Electronic Components Datasheet Search |
|
4867 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Future Electronics | 4867 | Keystone Electronics Corp | Stainless Steel 3.2 mm Length 6-32 Thread Force-Fit Round Standoff RoHS : Compliant |
| 0 | |
![]() Verical | 4867690001 | TE Connectivity | Cable Markers Printable Heat Shrink Cross-Linked Polyolefin Red RoHS : Compliant |
| 750 | |
| 4867690001 | TE Connectivity | Cable Markers Printable Heat Shrink Cross-Linked Polyolefin Red RoHS : Compliant |
| 212 | ||
![]() Avnet Americas | 2-644486-7 | TE Connectivity | Conn Shrouded Header HDR 7 POS 2.54mm Solder ST Thru-Hole - Bag (Alt: 2-644486-7) RoHS : Compliant |
| 1,600 | |
| 5748676-3 | TE Connectivity | D Sub Backshell, Diecast, Rapid Assembly, AMPLIMITE, DB, 180?, Zinc Alloy Body - Bag (Alt: 5748676-3) RoHS : Compliant |
| 399 | ||
| 5748678-4 | TE Connectivity | Connector Accessories Backshell/Cable Clamp Acrylonitrile Butadiene-Styrene Black Shell Size 4 Indi - Bag (Alt: 5748678-4) RoHS : Compliant |
| 213 | ||
| 5748677-3 | TE Connectivity | Cable Clamp for AMPLIMITE Series D-Subminiature Connectors Thermoplastic Black - Bag (Alt: 5748677-3) RoHS : Compliant |
| 202 | ||
| 5748677-5 | TE Connectivity | - Bag (Alt: 5748677-5) RoHS : Compliant |
| 104 | ||
| 5748676-4 | TE Connectivity | D Sub Backshell, Diecast, Rapid Assembly, AMPLIMITE, DC, 180?, Zinc Alloy Body - Bag (Alt: 5748676-4) RoHS : Compliant |
| 100 | ||
| 5748677-4 | TE Connectivity | Connector Accessories 9 POS Backshell/Cable Clamp Thermoplastic Bright Nickel Over Copper Shell Siz - Bag (Alt: 5748677-4) RoHS : Not Compliant |
| 95 | ||
| 5748677-2 | TE Connectivity | Cable Clamp for AMPLIMITE Series D-Subminiature Connectors Thermoplastic Black - Bag (Alt: 5748677-2) RoHS : Compliant |
| 2 | ||
| Y1748675R000B0L | VPG Foil Resistors | VHP202ZJ 675R000 0.1% - Bulk (Alt: Y1748675R000B0L) RoHS : Not Compliant |
| 0 | ||
| 4-1589486-7 | TE Connectivity | Receptacle Assy, vertical surface mount, two row - Bag (Alt: 4-1589486-7) RoHS : Not Compliant |
| 0 | ||
| 1948670500 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1948670500) RoHS : Not Compliant | 0 | |||
| 1486780000 | Weidmüller Interface GmbH & Co. KG | BL 3.50/02/180LH AU GY BX - Bulk (Alt: 1486780000) RoHS : Not Compliant | 0 | |||
| 2486-7511-000 | Radiall | SMB / STRAIGHT JACK RECEPTACLE MALE NICKEL - Bulk (Alt: 2486-7511-000) RoHS : Compliant |
| 0 | ||
| 548676-1 | TE Connectivity | - Bulk (Alt: 548676-1) RoHS : Not Compliant |
| 0 | ||
| MKP1848675454Y5 | Vishay Intertechnologies | - Bulk (Alt: MKP1848675454Y5) RoHS : Compliant | 0 | |||
![]() Mouser Electronics | 8671 | Keystone Electronics Corp | LED Lenses T1 3/4 CLR LENS CAP RoHS : Compliant |
| 8,869 | |
| 1814867 | Phoenix Contact | Pluggable Terminal Blocks PTSM 0,5/ 4-HH-2,5- THR WH R32 RoHS : Compliant |
| 2,751 | ||
| 5748676-4 | TE Connectivity | D-Sub Backshells KIT W/GROMMETS 37P .47" RoHS : Compliant |
| 907 | ||
| 5748677-3 | TE Connectivity | D-Sub Backshells CABLE CLAMP KIT SIZE 3 RoHS : Compliant |
| 846 | ||
| 4867 | Keystone Electronics Corp | Standoffs & Spacers FORCE-FIT 6-32 .125 RoHS : Compliant |
| 482 | ||
| 5748677-4 | TE Connectivity | D-Sub Backshells CLAMP KIT SIZE 4 RoHS : Compliant |
| 213 | ||
| 5748678-5 | TE Connectivity | D-Sub Backshells DSUB ACC: D CABLE CLAMP RoHS : Compliant |
| 191 | ||
| 5748677-5 | TE Connectivity | D-Sub Backshells DSUB ACC: D CABLE CLAMP SHLD RoHS : Compliant |
| 124 | ||
| 86-7 | Daniels Manufacturing Corporation (DMC) | Crimpers / Crimping Tools POSITIONER |
| 15 | ||
| 4867 | Adafruit Industries | Temperature Sensor Development Tools Adafruit SCD-30 - NDIR True CO2 Temperature and Humidity Sensor - STEMMA QT / Qwiic RoHS : Compliant |
| 11 | ||
| 5748678-3 | TE Connectivity | D-Sub Backshells DSUB ACC: B CABLE CLAMP RoHS : Compliant |
| 5 | ||
| 5748678-1 | TE Connectivity | D-Sub Backshells DSUB ACC: E CABLE CLAMP RoHS : Compliant |
| 2 | ||
| 86-79 | Daniels Manufacturing Corporation (DMC) | Crimpers / Crimping Tools 86 Positioner RoHS : Compliant |
| 1 | ||
| 4867 | Inspired LED | LED Lighting Fixtures White, 3000K, 3 Watt 18 Inch Length RoHS : Compliant |
| 0 | ||
| LPAF-30-03.0-L-06-1-K-FR | Samtec Inc | Board to Board & Mezzanine Connectors .050" LP Array(trademark) High-Speed High-Density Low Profile Open-Pin-Field Array |
| 0 | ||
![]() Newark | 5748678-2 | TE Connectivity | Cable Clamp Kit, Size 2, Abs; Product Range:Amplimite Series; D Sub Shell Size:Da; Cable Exit Angle:180°; Connector Body Material:Abs (Acrylonitrile Butadiene Styrene) Body; Accessory Type:Cable Clamp Kit; Connector Shell Size:Da Rohs Compliant: Yes RoHS : Compliant |
| 343 | |
| 5748678-4 | TE Connectivity | Cable Clamp Kit, Size 4, Abs; Product Range:Amplimite Series; D Sub Shell Size:Dc; Cable Exit Angle:180°; Connector Body Material:Abs (Acrylonitrile Butadiene Styrene) Body; Accessory Type:Cable Clamp Kit With Grommets Rohs Compliant: Yes RoHS : Compliant |
| 259 | ||
| 84867 | GEARWRENCH | Impact Socket 6 Point 3/4" Drive 1" Af; |Gearwrench 84867 RoHS : Not Compliant |
| 195 | ||
| 5748678-5 | TE Connectivity | Cable Clamp Kit, Size 5, Abs; Product Range:Amplimite Series; D Sub Shell Size:Dd; Cable Exit Angle:180°; Connector Body Material:Abs (Acrylonitrile Butadiene Styrene) Body; Accessory Type:Cable Clamp Kit With Grommets Rohs Compliant: Yes RoHS : Compliant |
| 55 | ||
| 5748678-3 | TE Connectivity | Cable Clamp Kit, Size 3, Abs; Product Range:Amplimite Series; D Sub Shell Size:Db; Cable Exit Angle:180°; Connector Body Material:Abs (Acrylonitrile Butadiene Styrene) Body; Accessory Type:Cable Clamp Kit With Grommets Rohs Compliant: Yes RoHS : Compliant |
| 36 | ||
| FMCA1486-72 | Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMCA1486-72 RoHS : Not Compliant |
| 23 | ||
| 20848-674 | nVent Schroff | Plug-In Unit, 6U, 6Hp; For Use With:Panels And Racks; External Height - Imperial:14"; External Height - Metric:355.6Mm; External Width - Imperial:1.2"; External Width - Metric:-; External Depth - Imperial:-; External Depth - Metric:-Rohs Compliant: Yes RoHS : Compliant |
| 20 | ||
| 77.A2.9.024.8671 | FINDER SpA | Ssr, Dpst-No, 25A, 4-32Vdc, Panel; |Finder Relays, Inc. 77.A2.9.024.8671 RoHS : Compliant |
| 10 | ||
| 94867 | 3M Interconnect | Terminal, Spade/Fork, #8, Crimp, Red; Product Range:Highland Series; Wire Size Awg Min:22Awg; Wire Size Awg Max:18Awg; Conductor Area Csa:-; Stud Size - Metric:M4; Stud Size - Imperial:#8; Insulator Material:Vinyl; Stud Size:#8 Rohs Compliant: No RoHS : Not Compliant |
| 8 | ||
| 77.C2.9.024.8671 | FINDER SpA | Ssr, Dpst-No, 50A, 4-32Vdc, Panel; |Finder Relays, Inc. 77.C2.9.024.8671 RoHS : Compliant |
| 8 | ||
| 77.A3.9.024.8671 | FINDER SpA | Ssr, 3Pst-No, 25A, 4-32Vdc, Panel; |Finder Relays, Inc. 77.A3.9.024.8671 RoHS : Compliant |
| 7 | ||
| 8048678 | Festo | Tubing Pneumatics; |Festo 8048678 RoHS : Compliant |
| 4 | ||
| WR71X24867 | Haier America Inc | Shelf Door Module; |Haier WR71X24867 RoHS : Not Compliant |
| 1 | ||
| 4867 | Adafruit Industries | Adafruit Scd-30 - Ndir Co2 Temperature And Humidity Sensor - Stemma Qt/Qwiic |Adafruit 4867 RoHS : Not Compliant |
| 0 | ||
| 4867 | Keystone Electronics Corp | Standoff; |Keystone 4867 RoHS : Compliant |
| 0 | ||
![]() RS | 5748677-4 | TE Connectivity | HOOD D-SUB 37POS STR.EXIT AMP METALLIZEDPLASTIC 0.255-0.47INCBLDIA EMI/RFISHIELD RoHS : Not Compliant |
| 94 | |
| 4867 | Keystone Electronics Corp | STANDOFF, FORCE-FIT, THREADED 6.32, LENGTH .125, OD .281, STAINLESS STEEL |
| 78 | ||
| 1448674 | RS Pro | ETHERNET SWITCH, UNMANAGED, COMPACT, 8 PORT, 30 VDC UL60950-1 CSA C22.2 |
| 51 | ||
| PUN-H-4X0,75-TSW (8048673) | Festo | TUBING, POLYURETHANE, HYDROLYSIS RESISTANT, 4MM OD, TRANSL WHITE, 50M COIL |
| 50 | ||
| 4867ANW-BOX | Arrow Hart | PLUG ANGLE 15A 125V 2P3W VINYL STR WH |
| 22 | ||
| 1964867 | RS Pro | NITRILE RUBBER O-RING SEAL, 10MM BORE, 14MM OUTER DIAMETER |
| 9 | ||
| IHLP1616BZERR10M11 (7486785P) | Vishay Dale | IHLP1616BZ-11 WIREWOUND SMDINDUCTOR W/ METALCORE,100 NH +/-20%WIREWOUND 12A IDC |
| 7 | ||
| 6214867 | RS Pro | ENCLOSURE DIE CAST ALUMINUM 5.5 X 2.51 X 2.17 IN (139.6 X 63.8 X 55 MM) |
| 6 | ||
| 60486 (60486-7) | Klein Tools Inc | COOLING PVA TOWEL, HIGH-VISIBILITY YELLOW, 2-PACK |
| 4 | ||
| 5748678-4 | TE Connectivity | HOOD, D-SUB, 37POS, STR.EXIT, AMP, ABS, 0.255-0.470IN.CBLDIA, EMI/RFISHIELD RoHS : Compliant |
| 3 | ||
| 154867 | RS Pro | BLACK CFCFFREE POLYURETHANE KNEELING & SITTING MAT 24 X 44 X 3CM |
| 2 | ||
| 1448678 | RS Pro | TEMPERATURE CONTROLLER PID OR ON/OFF 3 INPUT/3 OUTPUT 24VAC/VDC DIN |
| 2 | ||
| 454867 | RS Pro | D36 SERIES CRIMP TOOL DIE FOR TERMINAL TYPES WIRE SIZE 50 MM2 |
| 1 | ||
| 1448677 | RS Pro | TEMPERATURE CONTROLLER PID OR ON/OFF 3 INPUT/2 OUTPUT 24VAC/VDC DIN |
| 1 | ||
| 4867 | Adafruit Industries | ADAFRUIT SCD-30 - NDIR CO2 TEMPERATURE AND HUMIDITY SENSOR - STEMMA QT / QWIIC |
| 0 | ||
![]() Bisco Industries | 94867 | MISCELLANEOUS | 28 | |||
| 5748676-4 | TE Connectivity | RoHS : Compliant | 20 | |||
| 4867 | Keystone Electronics Corp | 10 | ||||
| 20848-674 | nVent Schroff | RoHS : Compliant | 10 | |||
| LS10048-6-7-16 | MISC. SPACERS/STANDOFFS/HANDLES | 10 | ||||
| 748678-1 | TE Connectivity | RoHS : Not Compliant | 5 | |||
![]() Onlinecomponents.com | 3-4867-007A | Eaton Cutler-Hammer | Pushbutton Suitable for RMQ-Titan Pushbutton Seri RoHS : Compliant |
| 15 | |
| 3-4867-020A | Eaton Cutler-Hammer | Pushbutton Suitable For Rmq-Titan Pushbutton Seri/Cooper Bussmann |Eaton Bussmann M30C-FDRL-X RoHS : Compliant |
| 9 | ||
| 121575-4867 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 16S-8 - Pins - Bayonet Coupling - Endbell w/Clamp & Bushing |
| 0 | ||
| 4867-BOX | Arrow Hart | RoHS : Compliant |
| 0 | ||
| HE.4867 | Greenlee Textron Inc | GREENLEE HE.4867 Decal, Warning (Ek22Gl), Cable Termination RoHS : Compliant |
| 0 | ||
| 053514-4867 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| 3-4867-021A | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| JE-1501-4867-2 | 3M Interconnect | .100 (2.54 MM) UNIVERSAL RoHS : Compliant |
| 0 | ||
| 3-4867-028A | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 3-4867-027A | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 3-4867-008A | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 3-4867-032A | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 3-4867-030A | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 3-4867-024A | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 80-0012-4867-5 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | MAX4867ELT+ | Maxim Integrated Products | MAX4867 Overvoltage Protection Controllers With Reverse Polarity Protection RoHS : Compliant |
| 866 | |
| MAX4867ELT+T | Maxim Integrated Products | Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO6 RoHS : Compliant |
| 7,500 | ||
MAX4867EUT![]() | Maxim Integrated Products | Fixed, 1 Channel, BICMOS, PDSO6 RoHS : Not Compliant |
| 2,626 | ||
MAX4867EUT-T![]() | Maxim Integrated Products | Fixed, 1 Channel, BICMOS, PDSO6 RoHS : Not Compliant |
| 5,000 | ||
| LM4867MTEX/NOPB | National Semiconductor Corporation | Audio Amplifier, 3W, 2 Channel(s), 1 Func, PDSO20 RoHS : Compliant |
| 2,650 | ||
![]() Sager | 4867 | Keystone Electronics Corp | Standoffs & Spacers FORCE-FIT 6-32 .125 |
| 0 | |
| 1424867 | Phoenix Contact | Heavy Duty Power Connectors HC-STA-B48-SHWS- 2SSM32-EMC-AL RoHS : Compliant |
| 0 | ||
| 486703000 | C&K Switches | Switch Hardware | 0 | |||
| 060-CS04867921437 | HONEYWELL TEST AND MEASUREMENT | AP111BR,1A,2J,5B,6A,9A:MODEL STJE, 100 | 0 | |||
| 2404867 | Phoenix Contact | Solid State Drives - SSD 60GB M.2 MLC SSD KIT RoHS : Compliant | 0 | |||
| 548676-1 | TE Connectivity | TE Connectivity ANGLE |
| 0 | ||
| 7-2266486-7 | TE Connectivity | Crimpers / Crimping Tools OC-050F075F-CRIMP TOOLING KIT | 0 | |||
| 486701000 | C&K Switches | Switch Hardware | 0 | |||
| 4-542486-7 | TE Connectivity | Bench Top Tools AMBOSS |
| 0 | ||
| BT1-X0-04-867-1X2-D | Carling Technologies | Circuit Breakers | 0 | |||
| 5748677-2 | TE Connectivity | D-Sub Backshells DSUB ACC: A CABLE CLAMP SHLD RoHS : Compliant |
| 0 | ||
| 6-542486-7 | TE Connectivity | Bench Top Tools AMBOSS ANVIL | 0 | |||
| 7-2836486-7 | TE Connectivity | Crimpers / Crimping Tools OCEAN 2.0 SPARE PART KIT-055F055O |
| 0 | ||
| 7-2150486-7 | TE Connectivity | Bench Top Tools OC-110F130F-CRIMP TOOLING KIT | 0 | |||
| 7-2837486-7 | TE Connectivity | TE Connectivity OCEAN_2.0_SPARE_PART_KIT-110O130O | 0 | |||
![]() TME | 2274867-5 | TE Connectivity | Contact; gold flash; shielded,EMI; Press-Fit,THT; on PCBs; angled RoHS : Compliant |
| 1,408 | |
| 5748677-3 | TE Connectivity | Enclosure for connectors: D-Sub; for cable; straight; shielded RoHS : Compliant |
| 466 | ||
| 10-564867-17U | Amphenol Corporation | Enclosure for connectors: D-Sub |
| 21 | ||
| 5748677-1 | TE Connectivity | Enclosure for connectors: D-Sub; straight; shielded; UNC 4-40 RoHS : Compliant |
| 15 | ||
| 64867 | Goobay | Cable; DisplayPort plug,both sides; DisplayPort 2.0,optical |
| 4 | ||
| 4867 | Keystone Electronics Corp | Screwed spacer sleeve; 3.18mm; Int.thread: UNC6-32; cylindrical |
| 0 | ||
| 1814867 | Phoenix Contact | Connector: pluggable terminal block; COMBICON XS; 320V; PIN: 4 RoHS : Compliant |
| 0 | ||
| 7000-44867-7960030 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; M12 female panel,RJ45 angled plug RoHS : Compliant |
| 0 | ||
| 77.B3.9.024.8671 | FINDER SpA | Relay: solid state; 40A; Uswitch: 24÷660VAC; 3-phase; IP20; 77 |
| 0 | ||
| 7000-44867-7960110 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; M12 female panel,RJ45 angled plug |
| 0 | ||
| 77.C2.9.024.8671 | FINDER SpA | Relay: solid state; 50A; Uswitch: 24÷660VAC; 2-phase; IP20; 77 |
| 0 | ||
| 1748671 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON XL; 76A; 1kV RoHS : Compliant |
| 0 | ||
| 7000-44867-7960075 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; M12 female panel,RJ45 angled plug RoHS : Compliant |
| 0 | ||
| 1848671 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON S; 8A; 400V RoHS : Compliant |
| 0 | ||
| GW94867 | Gewiss SpA | RCD breaker; Inom: 25A; Ires: 30mA; Poles: 4; 400VAC; IP40; 1÷35mm2 |
| 0 | ||
![]() ComSIT USA | 57486774 | TE Connectivity | AVAILABLE EU | 137 | ||
![]() Interstate Connecting Components | 5748678-5 | TE Connectivity | 2 PC PLST CBL CLMP KIT RoHS : Compliant |
| 53 | |
| 5748678-4 | TE Connectivity | 2 PC PLST CBL CLMP KIT RoHS : Compliant |
| 20 | ||
| 4-1589486-7 | TE Connectivity | STM009L82HN = SMT CONN RoHS : Not Compliant |
| 0 | ||
| 548676-1 | TE Connectivity | ANGLE |
| 0 | ||
| 4-542486-7 | TE Connectivity | AMBOSS |
| 0 | ||
| 048673-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCS03-03-R-9035 RoHS : Not Compliant | 0 | |||
| 486724-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55A0814-26-93 RoHS : Compliant | 0 | |||
| 7-2836486-7 | TE Connectivity | OCEAN_2.0_SPARE_PART_KIT-055F0 |
| 0 | ||
| RX48670137 | ITT Interconnect Solutions | RX486191608 | 0 | |||
| 5748677-5 | TE Connectivity | PLTD PLST CBL CLMP KITSZ 5 RoHS : Compliant |
| 0 | ||
| SA85004867932 | SOURIAU-SUNBANK | J3861 | 0 | |||
| 5748676-3 | TE Connectivity | DIE CAST CBL CLMP KITSZ 3 RoHS : Compliant |
| 0 | ||
| 10-048670-29S | Amphenol Industrial Operations | Crimp Plug, OD | 0 | |||
| 244867-000 | TE Connectivity | LVIT-150/50-A/U-C(140) RoHS : Compliant | 0 | |||
| 144-8674-000 | ITT Interconnect Solutions | 144-8674-000 | 0 | |||
![]() PEI Genesis | C10-564867-18FL | Amphenol Corporation |
| 242 | ||
| C10-564867-17FL | Amphenol Corporation |
| 122 | |||
| C10-564867-24FL | Amphenol Corporation |
| 2 | |||
| 10-564867-32FG | Amphenol Corporation |
| 0 | |||
| 10-048670-29S | Amphenol Corporation |
| 0 | |||
| C10-564867-14FL | Amphenol Corporation |
| 0 | |||
| C10-564867-20FL | Amphenol Corporation |
| 0 | |||
| C10-564867-16FL | Amphenol Corporation |
| 0 | |||
| U10-564867-323 | Amphenol Corporation |
| 0 | |||
| 10-564867-14Y | Amphenol Corporation |
| 0 | |||
| 10-564867-17U | Amphenol Corporation |
| 0 | |||
| C10-564867-11FL | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | ASP-194867-01 | Samtec Inc | Header / Socket Strip |
| 6,996 | |
| 5748678-4 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 193 | ||
| C10-564867-18FL | Amphenol Corporation | GT 06 18 E/B A SHORT (072) |
| 160 | ||
| 95-668-44867 | Amphenol RF | RF Connector |
| 116 | ||
| 848672-001 | TE Connectivity | Labels and Industrial Warning Signs |
| 99 | ||
| C10-564867-17FL | Amphenol Corporation | GT 06 16 E/B A SHORT (072) |
| 81 | ||
| 5748677-2 | TE Connectivity | PL PLAS STR REL-KIT RoHS : Compliant |
| 28 | ||
| 5748676-3 | TE Connectivity | DIE CAST STR REL-KIT RoHS : Compliant |
| 28 | ||
| 5748676-2 | TE Connectivity | DIE CAST STR REL-KIT RoHS : Compliant |
| 26 | ||
| 5748677-1 | TE Connectivity | PL PLAS STR REL-KIT RoHS : Compliant |
| 18 | ||
| 5748676-4 | TE Connectivity | DIE CAST STR REL-KIT RoHS : Compliant |
| 17 | ||
| 5748678-5 | TE Connectivity | 2 PC PLST CBL CLMP KIT RoHS : Compliant |
| 3 | ||
| 4-1589486-7 | TE Connectivity | D-Sub Connectors RoHS : Not Compliant |
| 1 | ||
| 7-2836486-7 | TE Connectivity | Tools |
| 1 | ||
| C10-564867-24FL | Amphenol Corporation | CONNECTOR |
| 1 | ||
![]() Richardson RFPD | SI5332BD14867-GM2R | Skyworks Solutions Inc | Frequency Synthesis Clock Generator RoHS : Compliant | 0 | ||
| SI5332BD14867-GM2 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 40-P RoHS : Compliant | 0 | |||
| TX4867 | Rakon Limited | Temperature Compensated Crystal Oscillator RoHS : Compliant | 0 | |||
| 1486-7511-000 | Radiall | RF Coax Pnl Mt Conn RoHS : Not Compliant | 0 | |||
| 935314867557 | NXP Semiconductors | MCU 8-bit S08 CISC 8KB Flash 3.3V/5V 32-Pin LQFP T RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 5748676-3 | TE Connectivity | INSTOCK RoHS : Compliant | 29,008 | ||
| 5748676-4 | TE Connectivity | INSTOCK RoHS : Compliant | 16,489 | |||
| 5748676-1 | TE Connectivity | INSTOCK RoHS : Compliant | 6,068 | |||
| 5748676-2 | TE Connectivity | INSTOCK RoHS : Compliant | 3,289 | |||
| 2274867-5 | TE Connectivity | INSTOCK RoHS : Compliant | 2,196 | |||
| 5748677-1 | TE Connectivity | INSTOCK RoHS : Compliant | 1,495 | |||
| 0348671002 | Molex | INSTOCK | 864 | |||
| 748677-1 | TE Connectivity | INSTOCK RoHS : Not Compliant | 9 | |||
| 748677-2 | TE Connectivity | INSTOCK RoHS : Not Compliant | 4 | |||
![]() Avnet Abacus | 5748676-1 | TE Connectivity | Cable Clamp Kit for AMPLIMITE Series 9 Position D Subminiature Connectors Zinc Alloy (Alt: 5748676-1) RoHS : Compliant | 4,900 | ||
| 5748676-3 | TE Connectivity | D Sub Backshell Diecast Rapid Assembly AMPLIMITE DB 180 Zinc Alloy Body (Alt: 5748676-3) RoHS : Compliant | 1,000 | |||
| 548676-1 | TE Connectivity | (Alt: 548676-1) RoHS : Compliant | 0 | |||
| 5748677-2 | TE Connectivity | Cable Clamp for AMPLIMITE Series DSubminiature Connectors Thermoplastic Black (Alt: 5748677-2) RoHS : Compliant | 0 | |||
| 5748677-2 | TE Connectivity | Cable Clamp for AMPLIMITE Series DSubminiature Connectors Thermoplastic Black (Alt: 5748677-2) RoHS : Compliant | 0 | |||
| 848677-000 | TE Connectivity | TE 202D9214860 (Alt: 848677-000) RoHS : Compliant | 0 | |||
| 848677-000 | TE Connectivity | TE 202D9214860 (Alt: 848677-000) RoHS : Compliant | 0 | |||
| 048673-000 | TE Connectivity | (Alt: 048673-000) RoHS : Not Compliant | 0 | |||
| 4-1589486-7 | TE Connectivity | Receptacle Assy vertical surface mount two row (Alt: 4-1589486-7) RoHS : Not Compliant | 0 | |||
| 4-1589486-7 | TE Connectivity | Receptacle Assy vertical surface mount two row (Alt: 4-1589486-7) RoHS : Not Compliant | 0 | |||
| 7-2266486-7 | TE Connectivity | (Alt: 7-2266486-7) RoHS : Not Compliant | 0 | |||
| 5-1393486-7 | TE Connectivity | DSubminiature IDC Connector Female 25Position Gold Over Nickel Contact Blister Pack (Alt: 5-1393486-7) RoHS : Compliant | 0 | |||
| 5-1393486-7 | TE Connectivity | DSubminiature IDC Connector Female 25Position Gold Over Nickel Contact Blister Pack (Alt: 5-1393486-7) RoHS : Compliant | 0 | |||
| SK 486 70 SA | Fischer Elektronik GmbH & Co KG | Heatsink 258x8mm L70mm black anodised (Alt: 10101723) RoHS : Compliant | 0 | |||
| MAL204867332E3 | Vishay Intertechnologies | (Alt: MAL204867332E3) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 23204-867 | Pentair Equipment Protection - Hoffman | (Alt: 23204-867) RoHS : Compliant | 0 | ||
| 5748676-5 | TE Connectivity | (Alt: 5748676-5) RoHS : Compliant | 0 | |||
| 5748677-2 | TE Connectivity | Cable Clamp for AMPLIMITE Series D-Subminiature Connectors Thermoplastic Black (Alt: 5748677-2) RoHS : Compliant | 0 | |||
| 5748676-1 | TE Connectivity | (Alt: 5748676-1) RoHS : Compliant | 0 | |||
| 5748676-2 | TE Connectivity | D Sub Backshell, Diecast, Rapid Assembly, AMPLIMITE, DA, 180?, Zinc Alloy Body (Alt: 5748676-2) RoHS : Compliant | 0 | |||
![]() Avnet Silica | SLG4BX48676-AP | Renesas Electronics Corporation | (Alt: SLG4BX48676-AP) RoHS : Compliant | 0 | ||
![]() Component Electronics, Inc | 748677-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 44 | |
| 5748678-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| 748678-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 17 | ||
| 5748677-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 11 | ||
| 5748676-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 4 | ||
| 5748678-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 3 | ||
| 748678-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
| 5748676-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| 5748678-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| 748676-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
| 748676-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
![]() DB Roberts | H48670-01 | Shercon Inc | 0 | |||
| H48670-02 | Shercon Inc | 0 | ||||
| 14867 | Heyco | LIQUID TIGHT CLAMPING CORDGRIP BRASS CGC M20-150X6MMTHD | 0 | |||
| 464867 | Essentra Components | 0 | ||||
| M4867 | Heyco | SCG 2.000 GRAY | 0 | |||
![]() FDH Electronics | W4867-7 | FDH Electronics | Wire and Cable | 8,850 | ||
| 5748676-4 | TE Connectivity | Connector Acc RoHS : Compliant |
| 48 | ||
| 5748676-3 | TE Connectivity | Connector Acc RoHS : Compliant |
| 15 | ||
| 748676-2 | TE Connectivity | Backshells & Ac RoHS : Not Compliant | 7 | |||
| 5748676-1 | TE Connectivity | Connector Acc RoHS : Compliant |
| 2 | ||
| 8486788-001 | Aptiv PLC | Miscellaneous | 0 | |||
| 5748677-1 | TE Connectivity | Connector Acc RoHS : Compliant |
| 0 | ||
| 5748678-2 | TE Connectivity | Placeholder RoHS : Compliant | 0 | |||
![]() Maritex | 5748676-1 | TE Connectivity | D-Sub Backshells; 5748676-1; TE CONNECTIVITY; 9; 3 m; Metal; Silver RoHS : Compliant |
| 878 | |
| 5748677-2 | TE Connectivity | D-Sub Backshells; 5748677-2; TE CONNECTIVITY; 15; Silver; 15; No RoHS : Compliant |
| 13 | ||
![]() Master Electronics | 848677-000 | TE Connectivity | 202D921-4/86-0 RoHS : Compliant |
| 125 | |
| 048670-0137 | ITT Interconnect Solutions | Thread Connector With Threaded Coupling. RoHS : Not Compliant |
| 7 | ||
| 1424867 | Phoenix Contact | Box mounting bases B48 - with single locking latch - material: Die-cast aluminum - salt water resistant - cable outlets: 2 - lateral - height: 99 mm - cable gland: none - support sleeve: yes - 2x M32 - Standard RoHS : Compliant |
| 0 | ||
| 4-1589486-7 | TE Connectivity | STM009L82HN = SMT Conn RoHS : Not Compliant |
| 0 | ||
| 000948670 | ITT Interconnect Solutions | Veam Cir Vbn Other |Itt Cannon FRCIR06R-18-20S-F80-T12 RoHS : Not Compliant |
| 0 | ||
| 060-CS04867921437 | Honeywell Sensing and Control | AP111BR 1A 2J 5B 6A 9A:MOD RoHS : Compliant |
| 0 | ||
| 078248-6721 | ITT Interconnect Solutions | NLDFT-1-R-L-C300-M40S-HG / 078238-6721 / Circular RoHS : Compliant |
| 0 | ||
| 248-6735-100 | ITT Interconnect Solutions | Itt Cannon |Itt Cannon 248-6735-100 RoHS : Compliant |
| 0 | ||
| 548676-1 | TE Connectivity | TE Connectivity ANGLE RoHS : Compliant |
| 0 | ||
| 80-0012-1486-7 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| S1SD-10-28-GF-48.67-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 970-0004-867 | ITT Interconnect Solutions | Wire 26-7/34 Wt/bk/or/gn E; Micros; Micro RoHS : Compliant |
| 0 | ||
| 448678-2 | TE Connectivity | Insert Assm 30 Plug Arinc600 RoHS : Compliant |
| 0 | ||
| 7-2266486-7 | TE Connectivity | OC-050F075F-CRIMPTOOLINGKIT RoHS : Not Compliant |
| 0 | ||
| JE-1501-4867-2 | 3M Interconnect | .100 (2.54 MM) UNIVERSAL RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 4867 | Adafruit Industries | Temperature Sensor Development Tools Adafruit SCD-30 - NDIR CO2 Temperature and Humidity Sensor - STEMMA QT / Qwiic |
| 50 | |
| 5748678-3 | TE Connectivity | D-Sub Backshells DSUB ACC: B CABLE CLAMP RoHS : Compliant |
| 50 | ||
| 1148670000 | Weidmüller Interface GmbH & Co. KG | Fixed Terminal Blocks SL 5.08HC/03/180G 3.2SN BK BX RoHS : Compliant |
| 50 | ||
| 5748676-1 | TE Connectivity | D-Sub Backshells KIT W/GROMMETS RoHS : Compliant |
| 50 | ||
| 5748677-2 | TE Connectivity | Hood D-Sub 15Pos StraightExit AMP MetallizedPlastic 0.185-0.320In.CblDia Shield RoHS : Compliant |
| 50 | ||
| 5748677-5 | TE Connectivity | Hood D-Sub 50Pos Str.Exit AMPBrand MetallizedPlastic 0.255-0.47In.CblDia EMI/RFI RoHS : Compliant |
| 0 | ||
| 5748676-3 | TE Connectivity | Cable Clamp Kit, Hood D-Sub 25Pos StraightExit AMP Die-CastMetal 0.255-0.470In.CblDia Shielded RoHS : Compliant |
| 0 | ||
| 2924867 | Phoenix Contact | Terminal Block Interface Modules MACX MCR-EX-SL SD-23-48-LFD RoHS : Compliant |
| 0 | ||
| AXG94867 | Axiom Manufacturing | AXIOM MPO-MPO OM3 F/M FIBER CABLE 5M |
| 0 | ||
| 5748676-5 | TE Connectivity | Hood D-Sub 50Pos Str.Exit AMPBrand Die-CastMetal 0.255-0.470In.CblDia EMI/RFI RoHS : Compliant |
| 0 | ||
| 5748676-4 | TE Connectivity | Hood D-Sub 37Pos Str.Exit AMP Die-CastMetal 0.255-0.470In.CblDia EMI/RFIShield RoHS : Compliant |
| 0 | ||
| 5748677-4 | TE Connectivity | Hood D-Sub 37Pos Str.Exit AMP MetallizedPlastic 0.255-0.47InCblDia EMI/RFIShield RoHS : Not Compliant |
| 0 | ||
| 1848671 | Phoenix Contact | Pluggable Terminal Blocks SDDC 1,5/ 5-PV-3,5 RoHS : Compliant |
| 0 | ||
| 1414867 | Phoenix Contact | Sensor Cables / Actuator Cables 5POS Power Cable Orange 1.5m RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W14867/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. TNC Female to SMA Male Right Angle Low Loss Cable Using LMR-195 Coax with HeatShrink., Radio frequency assembly TNC female to SMA male right angle low loss cable using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female to SMA male right angle low loss cable using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss TNC to right angle SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W14867/HS can also be known as a low loss TNC jack to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14867/HS RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our TNC female to right angle SMA male cable has a maximum VSWR of 1.4:1. TNC jack to SMA plug cable assembly PE3W14867/HS is built with LMR-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14867/HS can also be used in the other direction and will be a right angle SMA male to TNC female cable assembly if the opposite connectivity is required. Low loss TNC jack to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 8,503 | ||
| PE3W14867/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Female to SMA Male Right Angle Low Loss Cable 12 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly TNC female to SMA male right angle low loss cable 12 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female to SMA male right angle low loss cable 12 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss TNC to right angle SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W14867/HS-12 can also be known as a low loss TNC jack to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14867/HS-12 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our TNC female to right angle SMA male cable has a maximum VSWR of 1.4:1. TNC jack to SMA plug cable assembly PE3W14867/HS-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14867/HS-12 can also be used in the other direction and will be a right angle SMA male to TNC female cable assembly if the opposite connectivity is required. Low loss TNC jack to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,992 | ||
| PE3C4867 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack 2 Hole Flange to SMP Female Cable Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to SMP female cable using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to SMP female cable using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and SMP cable connection on the other. Our BMA to SMP cable assemblies have a jack gender on end 1 and female on end 2. This BMA to SMP cable is a jack to female coax assembly, PE3C4867, can also be known as a BMA female to SMP jack cable assembly and will be shipped same-day as it is purchased. BMA female to SMP jack cable assembly PE3C4867 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA jack 2 hole flange to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4867 can also be used in the other direction and will be SMP female to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMP cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to SMP female cable using PE-SR405FLJ coax. | 0 | |||
| PE3W04867LF | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to SMA Female Bulkhead Cable Using RG316 Coax, LF Solder. PE3W04867LF is a MMCX plug right angle to SMA female bulkhead cable using RG316 coax. This Pasternack MMCX plug right angle to SMA female bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. MMCX right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04867LF MMCX plug right angle to SMA female bulkhead cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W24867 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Female to BNC Female Bulkhead Cable Using RG405 Coax. PE3W24867 is a SMA female to BNC female bulkhead cable using RG405 coax. This Pasternack SMA female to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our female SMA to female BNC bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W24867 SMA female to BNC female bulkhead cable assembly is constructed with RG405 coax. | 0 | |||
| PE3W04867 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to SMA Female Bulkhead Cable Using RG316 Coax. PE3W04867 is a MMCX plug right angle to SMA female bulkhead cable using RG316 coax. This Pasternack MMCX plug right angle to SMA female bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. MMCX right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04867 MMCX plug right angle to SMA female bulkhead cable assembly is constructed with RG316 coax. | 0 | |||
| PE33486-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SMA Male to SMA Male Cable 72 Inch Length Using RG393 Coax., Radio frequency assembly SMA male to SMA male cable 72 inch length using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 72 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has male gender on end 1 and male on end 2. PE33486-72 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. SMA plug to SMA plug cable assembly PE33486-72 is built with RG393 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33486-72 RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE34486-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B100, RF Cable Type: PE-B100, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMC Plug Right Angle to SMC Jack Bulkhead Cable 72 Inch Length Using PE-B100 Coax., Radio frequency assembly SMC plug right angle to SMC jack bulkhead cable 72 inch length using PE-B100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug right angle to SMC jack bulkhead cable 72 inch length using PE-B100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMC cable connection on one end and SMC bulkhead cable connection on the other. Our right angle SMC to SMC cable assemblies have a plug gender on end 1 and jack on end 2. This SMC to SMC cable is a plug to jack coax assembly, PE34486-72, can also be known as a right angle SMC male to SMC female cable assembly and will be shipped same-day as it is purchased. SMC male to SMC female cable assembly PE34486-72 is built with PE-B100 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with right angle SMC to SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMC right angle plug to SMC jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34486-72 can also be used in the other direction and will be SMC jack bulkhead to right angle SMC plug cable assembly if the opposite connectivity is required. SMC right angle male to SMC female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug right angle to SMC jack bulkhead cable 72 inch length using PE-B100 coax. |
| 0 | ||
| PE3C4486-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMA Female Bulkhead to SSMC Plug Right Angle Cable 72 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA female bulkhead to SSMC plug right angle cable 72 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SSMC plug right angle cable 72 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle SSMC cable connection on the other. Our SMA to right angle SSMC cable assemblies have a female gender on end 1 and plug on end 2. This SMA to SSMC cable is a female to plug coax assembly, PE3C4486-72, can also be known as a SMA jack to right angle SSMC male cable assembly and will be shipped same-day as it is purchased. SMA jack to SSMC male cable assembly PE3C4486-72 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA female bulkhead to SSMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4486-72 can also be used in the other direction and will be right angle SSMC plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SSMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SSMC plug right angle cable 72 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3C4867-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Jack 2 Hole Flange to SMP Female Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to SMP female cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to SMP female cable 12 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and SMP cable connection on the other. Our BMA to SMP cable assemblies have a jack gender on end 1 and female on end 2. This BMA to SMP cable is a jack to female coax assembly, PE3C4867-12, can also be known as a BMA female to SMP jack cable assembly and will be shipped same-day as it is purchased. BMA female to SMP jack cable assembly PE3C4867-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA jack 2 hole flange to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4867-12 can also be used in the other direction and will be SMP female to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMP cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to SMP female cable 12 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3C4867-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 24 inches. Slide-On BMA Jack 2 Hole Flange to SMP Female Cable 24 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to SMP female cable 24 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to SMP female cable 24 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and SMP cable connection on the other. Our BMA to SMP cable assemblies have a jack gender on end 1 and female on end 2. This BMA to SMP cable is a jack to female coax assembly, PE3C4867-24, can also be known as a BMA female to SMP jack cable assembly and will be shipped same-day as it is purchased. BMA female to SMP jack cable assembly PE3C4867-24 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA jack 2 hole flange to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4867-24 can also be used in the other direction and will be SMP female to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMP cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to SMP female cable 24 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3C4867-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 36 inches. Slide-On BMA Jack 2 Hole Flange to SMP Female Cable 36 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to SMP female cable 36 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to SMP female cable 36 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and SMP cable connection on the other. Our BMA to SMP cable assemblies have a jack gender on end 1 and female on end 2. This BMA to SMP cable is a jack to female coax assembly, PE3C4867-36, can also be known as a BMA female to SMP jack cable assembly and will be shipped same-day as it is purchased. BMA female to SMP jack cable assembly PE3C4867-36 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA jack 2 hole flange to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4867-36 can also be used in the other direction and will be SMP female to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMP cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to SMP female cable 36 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3C4867-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 6 inches. Slide-On BMA Jack 2 Hole Flange to SMP Female Cable 6 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to SMP female cable 6 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to SMP female cable 6 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and SMP cable connection on the other. Our BMA to SMP cable assemblies have a jack gender on end 1 and female on end 2. This BMA to SMP cable is a jack to female coax assembly, PE3C4867-6, can also be known as a BMA female to SMP jack cable assembly and will be shipped same-day as it is purchased. BMA female to SMP jack cable assembly PE3C4867-6 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA jack 2 hole flange to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4867-6 can also be used in the other direction and will be SMP female to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMP cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to SMP female cable 6 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3C4867-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Jack 2 Hole Flange to SMP Female Cable 60 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to SMP female cable 60 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to SMP female cable 60 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and SMP cable connection on the other. Our BMA to SMP cable assemblies have a jack gender on end 1 and female on end 2. This BMA to SMP cable is a jack to female coax assembly, PE3C4867-60, can also be known as a BMA female to SMP jack cable assembly and will be shipped same-day as it is purchased. BMA female to SMP jack cable assembly PE3C4867-60 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA jack 2 hole flange to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4867-60 can also be used in the other direction and will be SMP female to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMP cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to SMP female cable 60 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3FCA486-7M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: APC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex LC APC to LC UPC, SM OS2, 2.0mm LSZH, Yellow-7M. Pasternack’s PE3FCA486-7M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 7-meter long simplex cable assembly is equipped with LC/APC to LC/UPC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA486-7M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA486-7M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of simplex LC/APC to LC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
![]() TE Connectivity | 2-644486-7 | TE Connectivity | 07P MTA100 SHRDED HDR ASSY SN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 7 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 7 | Polyester Vertical PCB Header: 2.54Mm & Shrouded & Mta 100 | Part Number: 2-644486-7 | Internal Number: 2-644486-7 | TE Connectivity RoHS : Compliant |
| 539 | |
| 5748678-3 | TE Connectivity | 2 PC PLST CBL CLMP KIT Strain Relief Accessory Type: Cable Clamp Kit Primary Product Material: ABS Primary Product Color: Black Compatible With Connector Shell Size: 3 Shielded: No Cable Clamp Kit ABS Black 3 | Connector Strain Relief | Part Number: 5748678-3 | Internal Number: 5748678-3 | TE Connectivity RoHS : Compliant |
| 238 | ||
| 5748678-4 | TE Connectivity | 2 PC PLST CBL CLMP KIT Strain Relief Accessory Type: Cable Clamp Kit Primary Product Material: ABS Primary Product Color: Black Compatible With Connector Shell Size: 4 Shielded: No Cable Clamp Kit ABS Black 4 | Connector Strain Relief | Part Number: 5748678-4 | Internal Number: 5748678-4 | TE Connectivity RoHS : Compliant |
| 134 | ||
| 5748678-5 | TE Connectivity | 2 PC PLST CBL CLMP KIT Strain Relief Accessory Type: Cable Clamp Kit Primary Product Material: ABS Primary Product Color: Black Compatible With Connector Shell Size: 5 Shielded: No Cable Clamp Kit ABS Black 5 | Connector Strain Relief | Part Number: 5748678-5 | Internal Number: 5748678-5 | TE Connectivity RoHS : Compliant |
| 70 | ||
| 5748677-5 | TE Connectivity | PLTD PLST CBL CLMP KIT,SZ 5 Strain Relief Accessory Type: Cable Clamp Kit Primary Product Material: Thermoplastic Compatible With Connector Shell Size: 5 Shielded: Yes Number of Positions: 50 Cable Clamp Kit Thermoplastic 5 | Connector Strain Relief | Part Number: 5748677-5 | Internal Number: 5748677-5 | TE Connectivity RoHS : Compliant |
| 55 | ||
![]() Vyrian | 5748678-3 | TE Connectivity | Connector Accessory, Backshell, Acrylonitrile Butadiene Styrene RoHS : Compliant | 12,728 | ||
| 5748676-5 | TE Connectivity | Connector Accessory, 0.255in Min Cable Dia, 0.47in Max Cable Dia, Backshell, Zinc Alloy RoHS : Compliant | 12,590 | |||
| 5748677-5 | TE Connectivity | Connector Accessory, 0.255in Min Cable Dia, 0.47in Max Cable Dia, Backshell, Polyethylene RoHS : Compliant | 12,094 | |||
| 5748678-5 | TE Connectivity | Connector Accessory, Backshell, Acrylonitrile Butadiene Styrene RoHS : Compliant | 11,320 | |||
| 748677-3 | TE Connectivity | Connector Accessory, 0.255in Min Cable Dia, 0.47in Max Cable Dia, Backshell, Metallized Plastic RoHS : Not Compliant | 10,674 | |||
| 5748678-2 | TE Connectivity | Connector Accessory, Backshell, Acrylonitrile Butadiene Styrene RoHS : Compliant | 9,979 | |||
| MAX4867LELT | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, BICMOS RoHS : Not Compliant | 9,747 | |||
| 2814867 | Phoenix Contact | Signal Interfaces | 9,470 | |||
| 2748674 | Phoenix Contact | Surge Arrestors | 8,680 | |||
| LM4867MT | Texas Instruments | Audio Amplifier, 1.5W, 2 Channel(s), 2 Func, PDSO20 | 8,667 | |||
| LM4867LQ | Texas Instruments | Audio Amplifier | 7,021 | |||
| 2N4867 | National Semiconductor Corporation | Transistor | 6,810 | |||
| 114867A | Micron Technology, Inc | 5,493 | ||||
MAX4867ELT-T![]() | Maxim Integrated Products | Power Supply Support Circuit, Fixed, 1 Channel, BICMOS RoHS : Not Compliant | 1,208 | |||
MAX4867ELT![]() | Maxim Integrated Products | Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO6 RoHS : Not Compliant | 839 | |||
![]() Waytek, Inc. | 148670-91W | General Cable Technologies Corporation | 12GA SXL Black Cross-Link Automotive Wire XLPE -51C to 125C |
| 10,500 | |
| 148671-91W | General Cable Technologies Corporation | 12GA SXL Red Cross-Link Automotive Wire XLPE -51C to 125C |
| 10,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |