| Electronic Components Datasheet Search |
|
4666 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | 5-104666-3 | TE Connectivity | Conn Shrouded Header HDR 40 POS 1.27mm Solder ST Thru-Hole Tube - Rail/Tube (Alt: 5-104666-3) RoHS : Compliant |
| 336 | |
| 1426466-6 | TE Connectivity | - Bulk (Alt: 1426466-6) RoHS : Not Compliant | 0 | |||
| 466670-2 | TE Connectivity | - Bulk (Alt: 466670-2) RoHS : Not Compliant | 0 | |||
| 6646666-1 | TE Connectivity | - Bulk (Alt: 6646666-1) RoHS : Compliant | 0 | |||
| 446660-1 | TE Connectivity | - Bulk (Alt: 446660-1) RoHS : Compliant |
| 0 | ||
| 466691-3 | TE Connectivity | - Bulk (Alt: 466691-3) RoHS : Not Compliant | 0 | |||
| 2646660000 | Weidmüller Interface GmbH & Co. KG | CHDV 5.00/14/90 3.5SN GN BX - Bulk (Alt: 2646660000) RoHS : Not Compliant |
| 0 | ||
| SIT8924AA-22-18E-55.466670D | SiTime Corporation | - Tape and Reel (Alt: SIT8924AA-22-18E-55.466670D) RoHS : Compliant | 0 | |||
| SIT9001AC-43-33E4-66.66700Y | SiTime Corporation | - Tape and Reel (Alt: SIT9001AC-43-33E4-66.66700Y) RoHS : Compliant | 0 | |||
| 466634-2 | TE Connectivity | - Bulk (Alt: 466634-2) RoHS : Not Compliant | 0 | |||
| 466689-3 | TE Connectivity | - Bulk (Alt: 466689-3) RoHS : Not Compliant | 0 | |||
| 466689-2 | TE Connectivity | - Bulk (Alt: 466689-2) RoHS : Not Compliant | 0 | |||
| 6-104666-1 | TE Connectivity | - Rail/Tube (Alt: 6-104666-1) RoHS : Compliant |
| 0 | ||
| 6646660-1 | TE Connectivity | - Bulk (Alt: 6646660-1) RoHS : Compliant | 0 | |||
| MAL224666472E3 | Vishay Intertechnologies | - Bulk (Alt: MAL224666472E3) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | 4666 | Adafruit Industries | Adafruit Accessories Mini Basic PIR Sensor - BS412 RoHS : Compliant |
| 2,243 | |
| 661-00682-C | Amphenol Corporation | Desktop AC Adapters 85W 20V at 4.25A Black MagSafe 2 Laptop Power Adapter and Cable |
| 15 | ||
| 661-4485-C | Amphenol Corporation | Desktop AC Adapters 60W 16.5V at 3.65A Black MagSafe 1 Laptop Power Adapter and Cable |
| 15 | ||
| 661-3994-C | Amphenol Corporation | Desktop AC Adapters 85W 18.5V at 4.6A Black MagSafe 1 Laptop Power Adapter and Cable |
| 15 | ||
| 661-00681-C | Amphenol Corporation | Desktop AC Adapters 60W 16.5V at 3.65A Black MagSafe 2 Laptop Power Adapter and Cable |
| 15 | ||
| 661-00529-C | Amphenol Corporation | Desktop AC Adapters 45W 14.85V at 3.05A Black MagSafe 2 Laptop Power Adapter and Cable |
| 14 | ||
| 1466617 | Phoenix Contact | Industrial Surge Protectors VAL-SPP-T2-440-3+1-UT-R RoHS : Compliant |
| 8 | ||
| HLE-112-02-F-DV-BE-TR | Samtec Inc | Headers & Wire Housings Cost-Effective Reliable Socket |
| 0 | ||
| 4666 | Keystone Electronics Corp | Mounting Hardware MICA INSULATOR RoHS : Compliant | 0 | |||
| 665240-B21-C | Amphenol Corporation | Ethernet Modules HP 665240-B21 Comparable 10/100/1000Mbs Quad RJ-45 Port 100m PCIe 2.0 x4 Network Interface Card RoHS : Compliant |
| 0 | ||
| 665243-B21-C | Amphenol Corporation | Ethernet Modules HP 665243-B21 Comparable 10Gbs Dual Open SFP+ Port PCIe 2.0 x8 Network Interface Card w/PXE boot RoHS : Compliant |
| 0 | ||
| 665249-B21-C | Amphenol Corporation | Ethernet Modules HP 665249-B21 Comparable 10Gbs Dual Open SFP+ Port PCIe 2.0 x8 Network Interface Card w/PXE boot RoHS : Compliant |
| 0 | ||
| 46661T9 | ITT Interconnect Solutions | D-Sub Standard Connectors 46661T9 |
| 0 | ||
| 466651N002 | TE Connectivity | Circular MIL Spec Strain Reliefs & Adapters 5412-00-130006-CS2359 RoHS : Compliant |
| 0 | ||
| 46660-0001 | Molex | Hook-up Wire SLIDERZ 20 CIRCUIT - CUSTOM RoHS : Compliant |
| 0 | ||
![]() Newark | 2834666-2 | TE Connectivity | Contact, Socket, 24-22Awg, Crimp; Product Range:Dynamic Ultra Series; Contact Gender:Socket; Contact Termination Type:Crimp; Wire Size Awg Max:22Awg; Contact Plating:Pre Tin Plated Contacts; Wire Size Awg Min:24Awg Rohs Compliant: Yes RoHS : Compliant |
| 60,000 | |
| 2834666-2 | TE Connectivity | Contact, Socket, 24-22Awg, Crimp; |Te Connectivity 2834666-2 RoHS : Compliant |
| 59,900 | ||
| ADA4666-2ARMZ-R7 | Analog Devices Inc | Op-Amp, 4Mhz, -40 To 125Deg C, Msop-8; |Analog Devices, Inc. ADA4666-2ARMZ-R7 RoHS : Compliant |
| 1,275 | ||
| ADA4666-2ARMZ-R7 | Analog Devices Inc | Op-Amp, 4Mhz, -40 To 125Deg C, Msop-8; |Analog Devices, Inc. ADA4666-2ARMZ-R7 RoHS : Compliant |
| 1,275 | ||
| ADA4666-2ARMZ | Analog Devices Inc | Op-Amp, 4Mhz, -40 To 125Deg C, Msop-8; |Analog Devices, Inc. ADA4666-2ARMZ RoHS : Compliant |
| 1,121 | ||
ADN4666ARZ![]() | Analog Devices Inc | Receiver, 400Mbps, 3.3V, Nsoic; |Analog Devices, Inc. ADN4666ARZ RoHS : Compliant |
| 620 | ||
| 284666-1 | TE Connectivity | Automotive Housing, Plug, 18Pos, Black; |Te Connectivity Amp 284666-1 RoHS : Compliant |
| 615 | ||
ADN4666ARUZ![]() | Analog Devices Inc | Receiver, 400Mbps, 3.3V, Tssop; |Analog Devices, Inc. ADN4666ARUZ RoHS : Compliant |
| 362 | ||
| 84666 | Brady Worldwide Inc | B302-10X14-Wr-T-Emergency Exit Only/ Sig; |Brady 84666 RoHS : Not Compliant |
| 60 | ||
| FMCA1466-6 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 6", 152.4Mm, Rg316; |Fairview Microwave FMCA1466-6 RoHS : Not Compliant |
| 23 | ||
| FMCA1466-60 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 5 Ft, 1.52M, Rg316; |Fairview Microwave FMCA1466-60 RoHS : Not Compliant |
| 23 | ||
| 1424666 | Phoenix Contact | Sensor Connector, M12, Plug, 4Pos, Cable; |Phoenix Contact 1424666 (Alternate Part Number: 4055626375939 RoHS : Compliant |
| 22 | ||
| 1046666 | Phoenix Contact | Hmi, Touch, 7-In, Tft, 800 X 480 Pxl; |Phoenix Contact 1046666 RoHS : Compliant |
| 3 | ||
| MIKROE-4666 | MikroElektronika | Fusion For Pic V8 With Pic24Ep512Gu814; |Mikroelektronika MIKROE-4666 RoHS : Compliant |
| 2 | ||
| 4666 | Adafruit Industries | Mini Basic Pir Sensor - Bs412 |Adafruit 4666 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | ADN4666ARUZ-REEL7![]() | Analog Devices Inc | Quad Channel 400Mbps LVDS Rece RoHS : Compliant |
| 35,268 | |
ADN4666ARZ-REEL7![]() | Analog Devices Inc | Quad Channel 400Mbps LVDS Rece RoHS : Compliant |
| 13,175 | ||
ADN4666ARZ![]() | Analog Devices Inc | Quad Channel 400Mbps LVDS Rece RoHS : Compliant |
| 7,616 | ||
| ADA4666-2ARMZ-RL | Analog Devices Inc | 18VLowPowerRRIO Untrimmed Cmos RoHS : Compliant |
| 4,750 | ||
| MAX4666ESE+ | Analog Devices Inc | 5 Ohm, Quad, SPST, CMOS Analog RoHS : Compliant |
| 1,614 | ||
ADN4666ARUZ![]() | Analog Devices Inc | Quad Channel 400Mbps LVDS Rece RoHS : Compliant |
| 239 | ||
| MAX4666CSE+ | Analog Devices Inc | 5 Ohm, Quad, SPST, CMOS Analog RoHS : Compliant |
| 64 | ||
| MAX4666CPE+ | Analog Devices Inc | 5 Ohm, Quad, SPST, CMOS Analog RoHS : Compliant |
| 1 | ||
| ADA4666-2ACPZ-R7 | Analog Devices Inc | 18VLowPowerRRIO Untrimmed Cmos RoHS : Compliant |
| 0 | ||
| ADA4666-2ARMZ | Analog Devices Inc | 18VLowPowerRRIO Untrimmed Cmos RoHS : Compliant |
| 0 | ||
| ADA4666-2ARMZ-R7 | Analog Devices Inc | 18VLowPowerRRIO Untrimmed Cmos RoHS : Compliant |
| 0 | ||
| ADA4666-2ACPZ-RL | Analog Devices Inc | 18VLowPowerRRIO Untrimmed Cmos RoHS : Compliant |
| 0 | ||
| MAX4666CSE+T | Analog Devices Inc | 5 Ohm, Quad, SPST, CMOS Analog RoHS : Compliant | 0 | |||
| MAX4666ESE+T | Analog Devices Inc | 5 Ohm, Quad, SPST, CMOS Analog RoHS : Compliant | 0 | |||
![]() RS | 93.01.0.024 (6668087) | FINDER SpA | RELAY SOCKET, 6A, 250V, SCREW, DIN RAIL, FOR USE WITH 34.51, 93 SERIES |
| 699 | |
| 446664 | RS Pro | TELEPHONE EXTENSION CABLE GRAY PVC SHEATH MALE RJ12 9 10" (3 M) |
| 615 | ||
| 93.51.7.024 (6668104) | FINDER SpA | RELAY SOCKET, DIN RAIL, 6A, 250V, FOR 34.51 RELAY, 93 SERIES |
| 138 | ||
| 1424666 (SACC-M12MS-4PL SH) | Phoenix Contact | CIRCULAR M12 PLUG, A CODE, 4 POSITION, PUSH IN, 4A, IP65, IP67, SPEEDCON SERIES |
| 50 | ||
| 93.21.0.024 (6668126) | FINDER SpA | RELAY SOCKET, TIMED, 12A 250V, SCREW, FOR 34.51 RELAYS, 93 SERIES |
| 27 | ||
| BI7-EG18F-AG6X (4614666) | TURCK Inc | PROXIMITY SENSOR, 7MM SENSING DISTANCENO, 2WIRE DC, FLUSH MOUNT |
| 5 | ||
| GRLA-3/8-QB-3/8-U (534666) | Festo | FLOW CONTROL VALVE, ONE-WAY, GRLA-3/8-QB-3/8-U |
| 5 | ||
| 1466627 | RS Pro | RS PRO HF ACCES KIT 27PCS FOR RS-HF 600 |
| 2 | ||
| 2394666 | RS Pro | PFABUTTON MAGNET THERMOCOUPLE WITH MINIATURE PLUG, TYPE K, 7/0.2MM, 1.64 FT |
| 1 | ||
| 1466623 | RS Pro | PASSIVE OSCILLOSCOPE PROBE 300MHZ 700V CAT I 1:100 BNC CONNECTOR 1.2NS RISE |
| 1 | ||
| 1246664 | RS Pro | 2 WAY IN-LINE CABLE SOCKET 30A IP68 |
| 1 | ||
| HEPP-28-30-EP-B (8146669) | Festo | GRIPPER, PARALLEL, HEPP SERIES |
| 1 | ||
| 4666 | Keystone Electronics Corp | TO-66 TRANSISTOR INSULATOR RoHS : Compliant |
| 0 | ||
| 4666 | Adafruit Industries | MINI BASIC PIR SENSOR - BS412 |
| 0 | ||
| 4666 | Dichtomatik | O-RING, 122,00 4,00 70 NBR NB7027 |
| 0 | ||
![]() Microchip Technology Inc | DSA1001DL3-055.4666VAO | Microchip Technology Inc | MEMS OSC, AUTO, LVCMOS, 55.4666MHz, 20PPM, 1.8-3.3V, -40 to 105C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-04-12 RoHS : Compliant |
| 0 | |
| DSA1001DL3-055.4666TVAO | Microchip Technology Inc | MEMS OSC, AUTO, LVCMOS, 55.4666MHz, 20PPM, 1.8-3.3V, -40 to 105C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-04-12 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 946-6693-02-03-10 | Cambion Electronics Ltd | 670 | |||
| 466604-006 | Accurate Screw Machine | 117 | ||||
| 12546661 | MISCELLANEOUS | 10 | ||||
| MS35764-666 | MS Bolts | 6 | ||||
| MS124666 | MS Inserts | 3 | ||||
| 4666-1032-AL | RAF Electronic Hardware | 2 | ||||
![]() Onlinecomponents.com | 793-4666 | WAGO Innovative Connections | WMB marking card - as card - Marked - 1 ... 50 (2x) - stretchable 4 - 4.2 mm - Vertical marking - snap-on type - white RoHS : Compliant |
| 0 | |
| 053514-4666 | ITT Interconnect Solutions | DCMZ-8X8S-Y-A197; D Sub; D Sub RoHS : Compliant |
| 0 | ||
| 151117-4666 | Molex | RoHS : Compliant |
| 0 | ||
| C115371-4666 | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| 71-4666 | Philmore | ADD-ON MIC BOOM-32-CHROME RoHS : Compliant |
| 0 | ||
| KH-4666-1 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 11-18-4666 | Molex | 60757A106 REAR PLUNGER RETAINER RoHS : Compliant |
| 0 | ||
| 902-4666-4-00 | Hirose Electric Co Ltd | [SignalBee™] 2 X 2.2mm Pitch, Wire-to-Wire Connector for Small Spaces RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | NB3N4666CDTR2G | onsemi | IC INTERFACE Receiver 400Mbps 2.97V - 3.63V 16-SOP T/R RoHS : Compliant |
| 120,049 | |
| ADA4666-2ACPZ-R7 | Analog Devices Inc | Op Amp Standard 4MHz 8-SON T/R RoHS : Compliant |
| 5 | ||
ADN4666ARUZ![]() | Analog Devices Inc | IC INTERFACE Receiver LVDS 400Mbps 3V - 3.6V 16-SOP Tube RoHS : Compliant |
| 23,341 | ||
| ADA4666-2ACPZ-RL | Analog Devices Inc | Op Amp Standard 4MHz 8-SON T/R RoHS : Compliant |
| 62 | ||
| D646669EPGF | Texas Instruments | DSP Computer Storage RoHS : Not Compliant |
| 480 | ||
MAX4666CPE![]() | Maxim Integrated Products | SPST, 4 Func, 1 Channel, CMOS, PDIP16 RoHS : Not Compliant |
| 15 | ||
| LM4666SD/NOPB | National Semiconductor Corporation | Audio Amplifier Class D 2-Channel (Stereo) 1.2W 14-SON T/R RoHS : Compliant |
| 20,365 | ||
![]() Sager | 4666 | Keystone Electronics Corp | Mounting Hardware MICA INSULATOR RoHS : Compliant | 0 | ||
| 1046669 | Phoenix Contact | Heavy Duty Power Connectors HC-BS-PG9 RoHS : Compliant |
| 0 | ||
| J4-6666-25-SV-CS854 | ABB Group | 25KV MULTI-POINT JUNCTION CS854 |
| 0 | ||
| 446660-1 | TE Connectivity | Rack & Panel Connectors SOCKET INSERT ASSM |
| 0 | ||
| 466651N002 | TE Connectivity | TE Connectivity 5412-00-130006-CS2359 RoHS : Not Compliant |
| 0 | ||
| 4666AB51K00794 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding GK,NiCu,NRS,PU,V0,Rec | 0 | |||
| 5414666-1 | TE Connectivity | RF Adapters - In Series PLUG-JACK ADAPTER R/A RoHS : Compliant | 0 | |||
| 1466605 | Phoenix Contact | VAL-SPP-T2-385-1+0-UT RoHS : Compliant |
| 0 | ||
| 1466687 | Phoenix Contact | Phoenix Contact VAL-SPP-T2-385-P |
| 0 | ||
| J4666625RCS1739 | ABB Group | 4 PT JUNCTION,J4-6666-25R W/K650J4 |
| 0 | ||
| 1466690 | Phoenix Contact | Phoenix Contact VAL-SPP-T2-750-P |
| 0 | ||
| J4-6666-25R | ABB Group | MULTIPOINT JUNCTION 25KV |
| 0 | ||
| 466634-2 | TE Connectivity | Bench Top Tools HDM SMPR042F090FKSA | 0 | |||
| 5.46.667.014/0000 | RAFI USA Inc | Switch Bezels / Switch Caps KEYCAP RS74 3-COLOURED | 0 | |||
| 5-104666-3 | TE Connectivity | Board to Board & Mezzanine Connectors 40SYSTEM 50 HDR DRST SHRD SN RoHS : Compliant |
| 0 | ||
![]() TME | 2944666671 | Fair-Rite Products Corp | Ferrite: bead; 1.02kΩ; Leads: axial; 100MHz; -55÷125°C RoHS : Compliant |
| 1,600 | |
| 2944666631 | Fair-Rite Products Corp | Ferrite: bead; 1.2kΩ; 100MHz; -55÷125°C RoHS : Compliant |
| 800 | ||
| 4666 | Rosa 3D | Filament: ASA; 1.75mm; black; 250÷280°C; 1kg; Table temp: 70÷110°C |
| 0 | ||
| 00466 60 000 200 | RECA | Screw; M6; M6x60; Head: cheese head; Phillips; PH3; steel; zinc |
| 0 | ||
| 00466 65 000 200 | RECA | Screw; M6; M6x65; Head: cheese head; Phillips; PH3; steel; zinc |
| 0 | ||
| 2646665802 | Fair-Rite Products Corp | Ferrite: sleeve; 46; -55÷90°C; 17.45x9.5x12.7mm; 100MHz; 76Ω RoHS : Compliant |
| 0 | ||
| 2466630500 | Weidmüller Interface GmbH & Co. KG | 2466630500 RoHS : Compliant |
| 0 | ||
| 10046662 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 34; THT; 3A; 250V; SL 1 |
| 0 | ||
| 10046663 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 35; THT; 3A; 250V; SL 1 |
| 0 | ||
| 1824666 | Phoenix Contact | Connector: PCB terminal block; 17.5A; 160V; PIN: 5; spring clamp RoHS : Compliant |
| 0 | ||
| 2646660000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; 10A; 630V; angled 90° |
| 0 | ||
| 1424666 | Phoenix Contact | Connector: M12; plug; PIN: 4; male; 60V; straight; push-lock; 4A RoHS : Compliant |
| 0 | ||
| 10046661 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 34; THT; 3A; 250V; SL 1 |
| 0 | ||
| 46663002 | Stahlwille Tools | Screwdriver: insulated; Phillips; PH2; 215mm; DRALL+ |
| 0 | ||
| 10046660 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 34; THT; 3A; 250V; SL 1 |
| 0 | ||
![]() ComSIT USA | 9,34666E+11 | Nexperia | AVAILABLE EU | 4,332 | ||
![]() Interstate Connecting Components | 446660-1 | TE Connectivity | SOCKET INSERT ASSY. |
| 0 | |
| 466651N002 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC5412-00-130006-CS2359 RoHS : Not Compliant | 0 | |||
| 5-104666-3 | TE Connectivity | 40 SYSTEM 50 HDR DRST SHRD SN RoHS : Compliant |
| 0 | ||
| 5-104666-2 | TE Connectivity | 30 SYSTEM 50 HDR DRST SHRD SN RoHS : Compliant |
| 0 | ||
| 6-104666-1 | TE Connectivity | 26 SYSTEM 50 HDR DRST SHRD SN RoHS : Compliant |
| 0 | ||
| ET04666001 | TE Connectivity | BISS-NO.1-0-30MM RoHS : Compliant | 0 | |||
| 3-644466-6 | TE Connectivity | 06P MTA156 CONN ASSY 20AWG YEL RoHS : Compliant |
| 0 | ||
| 0146662002 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCDSPL-NR3-0-STK RoHS : Compliant | 0 | |||
| 284666-1 | TE Connectivity | COVER+LEVER AND PLUG HSG KIT RoHS : Compliant |
| 0 | ||
| 2116466-6 | TE Connectivity | BRIDE 851+VOU 358 | 0 | |||
| 10-552446-66P | Amphenol Aerospace | TV INSR, GRMT 19-66P |
| 0 | ||
| 5-104666-4 | TE Connectivity | 50 SYSTEM 50 HDR DRST SHRD SN RoHS : Compliant |
| 0 | ||
| 5-104666-5 | TE Connectivity | 80 SYSTEM 50 HDR DRST SHRD SN RoHS : Compliant |
| 0 | ||
| 6364666-1 | TE Connectivity | CONN SEC II 31 POS W/ LATCH RoHS : Compliant |
| 0 | ||
| 6364666-2 | TE Connectivity | CONN SEC II 25 POS W/ LATCH RoHS : Compliant |
| 0 | ||
![]() NexGen Digital | 2944666631 | Fair-Rite Products Corp | RoHS : Compliant | 123 | ||
![]() PEI Genesis | S4666-1 | SOURIAU-SUNBANK |
| 0 | ||
| 46660-T9 | ITT Interconnect Solutions |
| 0 | |||
| 8246665-1 | SOURIAU-SUNBANK |
| 0 | |||
| SM-C-586466-6 | SOURIAU-SUNBANK |
| 0 | |||
| 46661-T9 | ITT Interconnect Solutions |
| 0 | |||
![]() Powell Electronics | 6-104666-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 514 | |
| 3-644466-6 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 320 | ||
| 104666-6 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 319 | ||
| 5-104666-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 146 | ||
| 6364666-1 | TE Connectivity | Card Edge Connectors RoHS : Compliant |
| 145 | ||
| 446660-1 | TE Connectivity | ARINC |
| 7 | ||
| 88-444666-96W | Amphenol Corporation | PLUG |
| 3 | ||
| 284666-1 | TE Connectivity | Connectors RoHS : Compliant |
| 3 | ||
| 14-666000-00 | Aries Electronics Inc | IC & Component Sockets SOIC TO SOWIC ADA RoHS : Not Compliant |
| 3 | ||
| 88-444666-11P | Amphenol Corporation | PLUG |
| 2 | ||
| 88-444666-35P | Amphenol Corporation | PLUG |
| 2 | ||
| 88-444666-32S | Amphenol Corporation | PLUG |
| 2 | ||
| 88-444666-35T | Amphenol Corporation | PLUG |
| 1 | ||
| 6-104666-1 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1 | ||
| 88-444666-28S | Amphenol Corporation | PLUG |
| 1 | ||
![]() Richardson RFPD | SI5335D-B14666-GMR | Skyworks Solutions Inc | Web Customizable, Any Frequency, Any Output Quad C RoHS : Compliant | 0 | ||
| 511JBA004666BAG | Skyworks Solutions Inc | Differential Single Ended Single Frequency Xo Oe P RoHS : Compliant |
| 0 | ||
| ADA4666-2ACPZ-R7 | Analog Devices Inc | Op Amp Dual Low Power Amplifier R-R I/O ±9V/18V 8- RoHS : Compliant |
| 0 | ||
| ADA4666-2ARMZ | Analog Devices Inc | Op Amp Dual Low Power Amplifier R-R I/O ±9V/18V 8- RoHS : Compliant |
| 0 | ||
| 511JBA004666CAG | Skyworks Solutions Inc | Oscillator XO 133.333333MHz ±50ppm LVDS 52% 1.8V 6 RoHS : Compliant |
| 0 | ||
| 22646666 | HUBER+SUHNER | Conn Type F-Type N Adapter 0Hz to 2GHz 75Ohm ST Ca RoHS : Compliant |
| 0 | ||
| ADA4666-2ARMZ-R7 | Analog Devices Inc | Op Amp Dual Low Power Amplifier R-R I/O ±9V/18V 8- RoHS : Compliant |
| 0 | ||
| ADA4666-2ACPZ-RL | Analog Devices Inc | Op Amp Dual Low Power Amplifier R-R I/O ±9V/18V 8- RoHS : Compliant |
| 0 | ||
| 530NB004666DG | Skyworks Solutions Inc | Oscillator XO 133.333333MHz ±31.5ppm LVDS 55% 3.3V RoHS : Compliant |
| 0 | ||
| 511JBA004666BAGR | Skyworks Solutions Inc | Oscillator XO 133.333333MHz ±50ppm LVDS 52% 1.8V 6 RoHS : Compliant |
| 0 | ||
ADN4666ARZ-REEL7![]() | Analog Devices Inc | LVDS Receiver 400Mbps 16-Pin SOIC N T/R RoHS : Compliant |
| 0 | ||
| SI5335D-B14666-GM | Skyworks Solutions Inc | Web Customizable, Any Frequency, Any Output Quad C RoHS : Compliant | 0 | |||
| 530NB004666DGR | Skyworks Solutions Inc | Oscillator XO 133.333333MHz ±31.5ppm LVDS 55% 3.3V RoHS : Compliant |
| 0 | ||
| 22646662 | HUBER+SUHNER | Conn BMA 0Hz to 18GHz 50Ohm Solder ST Cable Mount RoHS : Compliant | 0 | |||
| 124666 | Wakefield-Vette | HEAT PIPE RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 6098-4666 | SUMITOMO ELECTRIC Interconnect Products | INSTOCK | 55,900 | ||
| 2834666-2 | TE Connectivity | INSTOCK RoHS : Compliant | 19,500 | |||
| 2834666-1 | TE Connectivity | INSTOCK RoHS : Compliant | 19,500 | |||
| 2944666631 | Fair-Rite Products Corp | INSTOCK RoHS : Compliant | 13,000 | |||
| 10204666-00 | TE Connectivity | INSTOCK | 5,336 | |||
| 2246667-1 | TE Connectivity | INSTOCK RoHS : Compliant | 5,127 | |||
MAX4666ESE+![]() | Maxim Integrated Products | INSTOCK RoHS : Compliant | 1,144 | |||
MAX4666CSE+T![]() | Maxim Integrated Products | INSTOCK RoHS : Compliant | 230 | |||
| BA75-04666C | INSTOCK | 60 | ||||
![]() Avnet Abacus | 284666-1 | TE Connectivity | Conn Housing PL 18 POS 254mm Crimp ST Cable Mount Loose Piece (Alt: 284666-1) RoHS : Compliant | 0 | ||
| 284666-1 | TE Connectivity | Conn Housing PL 18 POS 254mm Crimp ST Cable Mount Loose Piece (Alt: 284666-1) RoHS : Compliant | 0 | |||
| 6646666-1 | TE Connectivity | (Alt: 6646666-1) RoHS : Compliant | 0 | |||
| 6646660-1 | TE Connectivity | (Alt: 6646660-1) RoHS : Compliant | 0 | |||
| 6364666-1 | TE Connectivity | (Alt: 6364666-1) RoHS : Compliant | 0 | |||
| 6364666-2 | TE Connectivity | (Alt: 6364666-2) RoHS : Compliant | 0 | |||
| 4666 N-395 | ebm-papst | PAP4666 N395 (Alt: 9244014395) RoHS : Compliant | 0 | |||
| 5-104666-3 | TE Connectivity | Conn Shrouded Header HDR 40 POS 127mm Solder ST ThruHole Tube (Alt: 5-104666-3) RoHS : Compliant | 0 | |||
| 5-104666-2 | TE Connectivity | Conn Shrouded Header HDR 30 POS 127mm Solder ST ThruHole Tube (Alt: 5-104666-2) RoHS : Compliant | 0 | |||
| 466638-000 | TE Connectivity | (Alt: 466638-000) RoHS : Compliant | 0 | |||
| 6-104666-1 | TE Connectivity | (Alt: 6-104666-1) RoHS : Compliant | 0 | |||
| ET04666001 | TE Connectivity | BISSNO1030MM (Alt: ET04666001) RoHS : Compliant | 0 | |||
| 5-104666-4 | TE Connectivity | Conn Shrouded Header HDR 50 POS 127mm Solder ST ThruHole Tube (Alt: 5-104666-4) RoHS : Compliant | 0 | |||
| 5-104666-4 | TE Connectivity | Conn Shrouded Header HDR 50 POS 127mm Solder ST ThruHole Tube (Alt: 5-104666-4) RoHS : Compliant | 0 | |||
| 5-104666-5 | TE Connectivity | Conn Shrouded Header HDR 80 POS 127mm Solder ST ThruHole Tube (Alt: 5-104666-5) RoHS : Compliant | 0 | |||
![]() Avnet Silica | NB3N4666CDTR2G | onsemi | Quad LVCMOS Differential Line Receiver Translator 33 V (Alt: NB3N4666CDTR2G) RoHS : Compliant | 0 | ||
![]() Component Electronics, Inc | 2322-724-66652L | YAGEO Corporation | IN STOCK SHIP TODAY |
| 5,000 | |
| 2322-704-66651L | YAGEO Corporation | IN STOCK SHIP TODAY |
| 4,000 | ||
| 2322-734-66659 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 2,430 | ||
| 2944666631 | Fair-Rite Products Corp | IN STOCK SHIP TODAY RoHS : Compliant |
| 439 | ||
| 5-104666-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 307 | ||
| SI4666DY-T1-GE3 | Vishay Siliconix | IN STOCK SHIP TODAY RoHS : Compliant | 6 | |||
| VSACC24666-1W | ViewSonic Corporation | IN STOCK SHIP TODAY | 1 | |||
![]() DB Roberts | 4666-1032-SS | RAF Electronic Hardware | 0 | |||
| 8466-632-A-24 | RAF Electronic Hardware | 0 | ||||
| 466677 | Essentra Components | 0 | ||||
| 466672 | Essentra Components | 0 | ||||
| TP114-666 | Pop Rivets | 0 | ||||
| 466680 | Essentra Components | 0 | ||||
| 466676 | Essentra Components | 0 | ||||
| 466675 | Essentra Components | 0 | ||||
| 466654 | Essentra Components | 0 | ||||
| 20546663 | Essentra Components | P0.667,0.580 C0.605,0.518SILIC | 0 | |||
| 466653 | Essentra Components | 0 | ||||
| 466682 | Essentra Components | 0 | ||||
| 466656 | Essentra Components | 0 | ||||
| 4466600 | SHEREX FASTENING SO | 0 | ||||
| 4466600 | PennEngineering (PEM) | 0 | ||||
![]() EBV Elektronik | NB3N4666CDTR2G | onsemi | Quad LVCMOS Differential Line Receiver Translator 33 V (Alt: NB3N4666CDTR2G) RoHS : Compliant | 0 | ||
| SI4666DY-T1-GE3 | Vishay Intertechnologies | (Alt: SI4666DY-T1-GE3) RoHS : Compliant | 0 | |||
![]() FDH Electronics | M22759/32-24-5/4-.666" | Whitmore/Wirenetics | Wire and Cable | 13,719 | ||
| M22759/32-22-4/6-.667" | Whitmore/Wirenetics | Hook-Up Wire | 1,544 | |||
| MANHAT M4666 | Alpha Wire | Wire and Cable |
| 296 | ||
| 10-552446-66P | Amphenol Aerospace | Circular Conn |
| 103 | ||
![]() Flip Electronics | NB3N4666CDTR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,500 | |
![]() Master Electronics | 6-104666-1 | TE Connectivity | 26 SYSTEM 50 HDR DRST SHRD SN RoHS : Compliant |
| 2 | |
| 1046669 | Phoenix Contact | Screw plug - cable gland material: Nickel-plated brass - connecting thread: Pg9 - color: silver RoHS : Compliant |
| 0 | ||
| 446660-1 | TE Connectivity | SOCKET INSERT ASSY. RoHS : Compliant |
| 0 | ||
| 466651N002 | TE Connectivity | 5412-00-130006-CS2359 MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 1466605 | Phoenix Contact | VAL-SPP-T2-385-1+0-UT RoHS : Compliant |
| 0 | ||
| 1466687 | Phoenix Contact | VAL-SPP-T2-385-P RoHS : Compliant |
| 0 | ||
| 1466690 | Phoenix Contact | VAL-SPP-T2-750-P RoHS : Compliant |
| 0 | ||
| 000846660 | ITT Interconnect Solutions | MS3106F3217SW; MIL-DTL 5015 Series I; Circular RoHS : Not Compliant |
| 0 | ||
| Z46669 | ITT Interconnect Solutions | Circular Connector - Receptacle - Female Sockets - 26 Position - Shell Size-Insert 28-12 - Bayonet Lock - Crimp Contacts - Panel (Flange) Mount. RoHS : Not Compliant |
| 0 | ||
| 5-104666-3 | TE Connectivity | 40 SYSTEM 50 HDR DRST SHRD SN MOQ Reduction RoHS : Compliant |
| 0 | ||
| 5-104666-2 | TE Connectivity | 30 SYSTEM 50 HDR DRST SHRD SN MOQ Reduction RoHS : Compliant |
| 0 | ||
| 484666 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| VAB2UFR4-66600-000 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| 466638-000 | TE Connectivity | 202D174-3/86-0 MOQ Reduction RoHS : Compliant |
| 0 | ||
| M4666-SL002 | Alpha Wire | Slate - 152.4m (500ft)/Spool RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 2466600000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks AFS 2.5 CF 2C 24V BK RoHS : Compliant |
| 50 | |
| 09654666812 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV ML SSDP ANG73-254 37P RoHS : Compliant |
| 48 | ||
| 2466610000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks AFS 2.5 CF 2C 12V BK RoHS : Compliant |
| 41 | ||
| 1424666 | Phoenix Contact | Circular Metric Connectors SACC-M12MS-4PL SH, 4-position, shielded, Plug straight M12 RoHS : Compliant |
| 0 | ||
| 1046667 | Phoenix Contact | TFT Displays & Accessories BTP 2102W 16:9 800X480 RoHS : Compliant |
| 0 | ||
| 5146662 | Phoenix Contact | Printers BLUEMARK CLED-FLUID-CARTR. RoHS : Compliant |
| 0 | ||
| 1046666 | Phoenix Contact | TFT Displays & Accessories BTP 2070W 16:9 800X480 RoHS : Compliant |
| 0 | ||
| 3046663 | Phoenix Contact | Component Terminal Block, Screw, 2row 4Conn, 500V 24A, 12-26AWG, UTTB 2,5-DIO/U-O RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE4666 | Pasternack Enterprises | Key Specifications, Polarity: Reverse Polarity, Connector Series: TNC, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Interface Type 1: RG59B/U, Interface Type 2: RG62, Interface Type 3: RG71. RP-TNC Male Connector Crimp/Solder Attachment for RG59B/U, RG62, RG71. PE4666 reverse polarity TNC male coaxial connector has an interface type of TNC male which is compatible with RG59B/U, RG62 and RG71 cables and has an impedance of 50 Ohms. Pasternack's reverse polarity TNC male connector uses crimp/solder as an attachment method. This TNC male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack reverse polarity TNC male coaxial connector has a PTFE dielectric type. Pasternack's TNC coaxial connector has a brass body with nickel plating. Our PE4666 reverse polarity TNC connector uses agold-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. Our high-quality PE4666 features a 70 µin minimum body plating specification. This TNC connector has a gold inner contact plating. Our TNC male connector has a length of 1.135 inches, a width of 0.59 inches, and a weight of 0.034 lbs. This Pasternack reverse polarity male TNC connector will ship the same business day as purchased. Our TNC male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements. |
| 1,416 | |
| PE3W05466-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. N Male to SMA Female Cable 6 Inch Length Using RG400 Coax., Radio frequency assembly N male to SMA female cable 6 inch length using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to SMA female cable 6 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our type N to SMA cable assembly has male gender on end 1 and female on end 2. PE3W05466-6 can also be known as a type N plug to SMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Type N plug to SMA jack cable assembly PE3W05466-6 is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to SMA cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3W05466-6 RF cable are available on our downloadable PDF datasheet.PE3W05466-6 can also be used in the other direction and will be SMA female to type N male cable assembly if the opposite connectivity is required. N type plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal N RF cable assembly as per your requirements. |
| 227 | ||
| PE44666 | Pasternack Enterprises | Key Specifications, Polarity: Reverse Polarity, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 12.4 GHz, Interface Type 1: PE-C400, Interface Type 2: PE-B400, Interface Type 3: PE-B405, Interface Type 4: LMR-400, Interface Type 5: LMR-400-DB, Interface Type 6: LMR-400-UF, Interface Type 7: .400 inch. RP SMA Male Connector Crimp/Solder Attachment for PE-C400, PE-B400, PE-B405, LMR-400, LMR-400-DB, LMR-400-UF, 0.400 inch. PE44666 reverse polarity SMA male coaxial connector has an interface type of PE-C400, PE-B400, PE-B405, LMR-400, LMR-400-DB, LMR-400-UF, .400 inch and a 50 Ohm impedance. Pasternack reverse polarity SMA male connector uses shield/contact crimp/solder as an attachment method. Our reverse polarity male SMA coaxial connector provides a minimum frequency of DC and a maximum frequency of 12.4 GHz. The Pasternack reverse polarity SMA male coaxial connector has a PTFE dielectric type. The Pasternack SMA coaxial connector has a brass body with gold plating. Our PE44666 reverse polarity SMA connector uses beryllium copper contact. This reverse polarity SMA male coaxial RF connector is RoHS and REACH compliant. This Pasternack reverse polarity male SMA connector will ship the same day as purchased. Our SMA reverse polarity male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMA connector cable assemblies that will ship the same day as well, *LMR™ is a Trademark of Times Microwave. |
| 43 | ||
| PE3MSA00466-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: PLUG, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: PLUG, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. Lead Free 2-Slot TRB Plug to 3-Slot TRB Plug 1553 Cable 60 Inch Length Using 78 Ohm M17/176-00002 Twinax., Radio frequency assembly lead free 2-Slot TRB plug to 3-Slot TRB plug 1553 cable 60 inch length using 78 Ohm M17/176-00002 twinax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 2-Slot TRB plug to 3-Slot TRB plug 1553 cable 60 inch length using 78 Ohm M17/176-00002 twinax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and plug on end 2. PE3MSA00466-60 can also be known as a 1553 TRB male to TRB male cable assembly and will be shipped same-day as it is purchased. TRB male to TRB male cable assembly PE3MSA00466-60 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to TRB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB male to TRB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 2-Slot TRB plug to 3-Slot TRB plug 1553 cable 60 inch length using 78 Ohm M17/176-00002 twinax. |
| 6 | ||
| PE3C4666 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 3.5mm Female Bulkhead to SMP Female Right Angle Cable Using PE-P086HF Coax. PE3C4666 is a 3.5mm female bulkhead to SMP female right angle cable using PE-P086HF coax. This Pasternack 3.5mm female bulkhead to SMP female right angle cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm SMP for connector 2. 3.5mm to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female 3.5mm bulkhead to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C4666 3.5mm female bulkhead to SMP female right angle cable assembly is constructed with PE-P086HF coax and the maximum VSWR is 1.4:1. | 0 | |||
| PE3W14666/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Slide-On BMA Jack 2 Hole Flange to SMA Female Bulkhead Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly slide-on BMA jack 2 hole flange to SMA female bulkhead low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The slide-on BMA jack 2 hole flange to SMA female bulkhead low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA 2 hole flange cable connection on one end and a SMA bulkhead cable connection on the other. Our low loss BMA to SMA cable assembly has a jack gender on end 1 and a female on end 2. PE3W14666/HS-100CM can also be known as a low loss BMA female to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14666/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to SMA jack cable assembly PE3W14666/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14666/HS-100CM can also be used in the other direction and will be a SMA female bulkhead to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. Low loss BMA female 2 hole flange to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to SMA cable assembly for quick shipment worldwide. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W24666 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Thread, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. Reverse Thread SMA Male to 7/16 DIN Female Cable Using RG400 Coax. PE3W24666 is a reverse thread SMA male to 7/16 DIN female cable using RG400 coax. This Pasternack reverse thread SMA male to 7/16 DIN female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our reverse thread male SMA to female 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24666 SMA reverse thread male to 7/16 DIN female cable assembly is constructed with RG400 coax. | 0 | |||
| PE3W14666/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Slide-On BMA Jack 2 Hole Flange to SMA Female Bulkhead Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly slide-on BMA jack 2 hole flange to SMA female bulkhead low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The slide-on BMA jack 2 hole flange to SMA female bulkhead low loss cable 24 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA 2 hole flange cable connection on one end and a SMA bulkhead cable connection on the other. Our low loss BMA to SMA cable assembly has a jack gender on end 1 and a female on end 2. PE3W14666/HS-24 can also be known as a low loss BMA female to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14666/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to SMA jack cable assembly PE3W14666/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14666/HS-24 can also be used in the other direction and will be a SMA female bulkhead to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. Low loss BMA female 2 hole flange to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to SMA cable assembly for quick shipment worldwide. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W14666/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack 2 Hole Flange to SMA Female Bulkhead Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly slide-on BMA jack 2 hole flange to SMA female bulkhead low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The slide-on BMA jack 2 hole flange to SMA female bulkhead low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA 2 hole flange cable connection on one end and a SMA bulkhead cable connection on the other. Our low loss BMA to SMA cable assembly has a jack gender on end 1 and a female on end 2. PE3W14666/HS can also be known as a low loss BMA female to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14666/HS RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to SMA jack cable assembly PE3W14666/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14666/HS can also be used in the other direction and will be a SMA female bulkhead to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. Low loss BMA female 2 hole flange to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to SMA cable assembly for quick shipment worldwide. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W14666/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Slide-On BMA Jack 2 Hole Flange to SMA Female Bulkhead Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly slide-on BMA jack 2 hole flange to SMA female bulkhead low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The slide-on BMA jack 2 hole flange to SMA female bulkhead low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA 2 hole flange cable connection on one end and a SMA bulkhead cable connection on the other. Our low loss BMA to SMA cable assembly has a jack gender on end 1 and a female on end 2. PE3W14666/HS-48 can also be known as a low loss BMA female to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14666/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to SMA jack cable assembly PE3W14666/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14666/HS-48 can also be used in the other direction and will be a SMA female bulkhead to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. Low loss BMA female 2 hole flange to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to SMA cable assembly for quick shipment worldwide. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W14666 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack 2 Hole Flange to SMA Female Bulkhead Cable Using LMR-100 Coax. PE3W14666 is a BMA jack 2 hole flange to SMA female bulkhead cable using LMR-100A coax. This Pasternack BMA jack 2 hole flange to SMA female bulkhead cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm SMA for connector 2. Our jack BMA 2 hole flange to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14666 BMA jack 2 hole flange to SMA female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE34666/SP2 | Pasternack Enterprises | 0 | ||||
| PE3W14666/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Slide-On BMA Jack 2 Hole Flange to SMA Female Bulkhead Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly slide-on BMA jack 2 hole flange to SMA female bulkhead low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The slide-on BMA jack 2 hole flange to SMA female bulkhead low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA 2 hole flange cable connection on one end and a SMA bulkhead cable connection on the other. Our low loss BMA to SMA cable assembly has a jack gender on end 1 and a female on end 2. PE3W14666/HS-200CM can also be known as a low loss BMA female to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14666/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to SMA jack cable assembly PE3W14666/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14666/HS-200CM can also be used in the other direction and will be a SMA female bulkhead to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. Low loss BMA female 2 hole flange to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to SMA cable assembly for quick shipment worldwide. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W14466-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male Right Angle to QMA Male Cable 6 Inch Length Using RG400 Coax., Radio frequency assembly SMA male right angle to QMA male cable 6 inch length using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to QMA male cable 6 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and a QMA cable connection on the other. Our right angle SMA to QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W14466-6 can also be known as a right angle SMA plug to QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14466-6 RF cable has a FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to QMA male cable has a maximum VSWR of 1.4:1. SMA plug to QMA plug cable assembly PE3W14466-6 is built with RG400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to QMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W14466-6 can also be used in the other direction and will be a QMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to QMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to QMA cable assembly for quick shipment worldwide. Variations of SMA and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to QMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W14666/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Slide-On BMA Jack 2 Hole Flange to SMA Female Bulkhead Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly slide-on BMA jack 2 hole flange to SMA female bulkhead low loss cable 36 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The slide-on BMA jack 2 hole flange to SMA female bulkhead low loss cable 36 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA 2 hole flange cable connection on one end and a SMA bulkhead cable connection on the other. Our low loss BMA to SMA cable assembly has a jack gender on end 1 and a female on end 2. PE3W14666/HS-36 can also be known as a low loss BMA female to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14666/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to SMA jack cable assembly PE3W14666/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14666/HS-36 can also be used in the other direction and will be a SMA female bulkhead to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. Low loss BMA female 2 hole flange to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to SMA cable assembly for quick shipment worldwide. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
![]() TE Connectivity | 3-644466-6 | TE Connectivity | 06P MTA156 CONN ASSY 20AWG YEL Number of Positions: 6 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: With Mating Alignment Type: Polarizing Tab Standard Rectangular Connector | 6 Receptacle Connector Assembly With | Part Number: 3-644466-6 | Internal Number: 3-644466-6 | TE Connectivity RoHS : Compliant |
| 6,900 | |
| 5-104666-3 | TE Connectivity | 40 SYSTEM 50 HDR DRST SHRD SN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 40 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5-104666-3 | Internal Number: 5-104666-3 | TE Connectivity RoHS : Compliant |
| 1,775 | ||
| 5-104666-1 | TE Connectivity | 20 SYSTEM 50 HDR DRST SHRD SN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 20 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5-104666-1 | Internal Number: 5-104666-1 | TE Connectivity RoHS : Compliant |
| 639 | ||
| 5-104666-5 | TE Connectivity | 80 SYSTEM 50 HDR DRST SHRD SN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 80 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5-104666-5 | Internal Number: 5-104666-5 | TE Connectivity RoHS : Compliant |
| 212 | ||
| 2246667-1 | TE Connectivity | DUAL BAND PUCK ANTENNA ASSY, 1.37 CABLE Antenna Type: Stamped Metal Band Type: Dual Band Primary Application: Wi-Fi Communication Protocol: Wi-Fi Zigbee Bluetooth Mounting Location: Internal/Embedded Stamped Metal Dual Band Wi-Fi | Antenna | Part Number: 2246667-1 | Internal Number: 2246667-1 | TE Connectivity RoHS : Compliant |
| 200 | ||
| 6364666-2 | TE Connectivity | CONN SEC II 25 POS W/ LATCH Connector System: Board-to-Board Number of Positions: 50 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in Contact Current Rating (Max): 4.26 A Board-to-Board 50 2.54 mm .1" | Card Edge Power Connector | Part Number: 6364666-2 | Internal Number: 6364666-2 | TE Connectivity RoHS : Compliant |
| 135 | ||
![]() Vyrian | 6-104666-1 | TE Connectivity | Board Connector, 26 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Locking, Black Insulator, Plug RoHS : Compliant | 13,144 | ||
MAX4666EPE![]() | Maxim Integrated Products | SPST, 4 Func, 1 Channel, CMOS, PDIP16 RoHS : Not Compliant | 12,029 | |||
ADN4666ARZ![]() | Analog Devices Inc | Line Receiver, 4 Func, 4 Rcvr, CMOS, PDSO16 RoHS : Compliant | 11,474 | |||
| ADA4666-2ACPZ-RL | Analog Devices Inc | Operational Amplifier, 2 Func, 3500uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 11,353 | |||
| 1414666 | Phoenix Contact | Cables/Accessories RoHS : Compliant | 11,025 | |||
| ADA4666-2ARMZ | Analog Devices Inc | Operational Amplifier, 2 Func, 3500uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 8,985 | |||
| 1424666 | Phoenix Contact | Circular Connector, 4 Contact(s), Zinc Alloy, Male, Plug RoHS : Compliant | 8,655 | |||
ADN4666ARUZ![]() | Analog Devices Inc | Line Receiver, 4 Func, 4 Rcvr, CMOS, PDSO16 RoHS : Compliant | 8,474 | |||
| ADA4666-2ACPZ-R7 | Analog Devices Inc | Operational Amplifier, 2 Func, 3500uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 7,260 | |||
| ADA4666-2ARMZ-R7 | Analog Devices Inc | Operational Amplifier, 2 Func, 3500uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 5,608 | |||
| PT4666A | Texas Instruments | DC-DC Regulated Power Supply Module, 2 Output, 25W, Hybrid RoHS : Not Compliant | 4,269 | |||
| LM4666SDX/NOPB | Texas Instruments | Audio Amplifier, 2 Func, PDSO14 RoHS : Compliant | 3,112 | |||
MAX4666CSE-T![]() | Maxim Integrated Products | SPST, 4 Func, 1 Channel, CMOS, PDSO16 RoHS : Not Compliant | 819 | |||
MAX4666CSE+T![]() | Maxim Integrated Products | SPST, 4 Func, 1 Channel, CMOS, PDSO16 RoHS : Compliant | 812 | |||
MAX4666CSE+![]() | Maxim Integrated Products | SPST, 4 Func, 1 Channel, CMOS, PDSO16 RoHS : Compliant | 241 | |||
![]() Win Source Electronics | ADA4666-2ARMZ | Analog Devices Inc | 18 V, 725 A, 4 MHz CMOS RRIO Operational Amplifier | IC OPAMP GP 2 CIRCUIT 8MSOP RoHS : Compliant |
| 20,912 | |
| ADA4666-2ARMZ-R7 | Analog Devices Inc | IC OPAMP GP 2 CIRCUIT 8MSOP RoHS : Compliant |
| 20,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |