| Electronic Components Datasheet Search |
|
45100SLASH20 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() DigiKey | 8451 0081000 | Belden Inc | CABLE 2COND 22AWG GRAY SHLD |
| 84,000 | |
BUK9K45-100E,115![]() | Nexperia | MOSFET 2N-CH 100V 21A LFPAK56D RoHS : Compliant |
| 2,897 | ||
BUK9K45-100E,115![]() | Nexperia | MOSFET 2N-CH 100V 21A LFPAK56D RoHS : Compliant |
| 2,897 | ||
| OQ1654510000G | Amphenol Anytek | TERM BLOCK HDR 16POS 5.08MM |
| 2,210 | ||
| 5047545100 | Molex | CONN FPC 51POS 0.3MM R/A RoHS : Compliant |
| 2,179 | ||
| 5047545100 | Molex | CONN FPC 51POS 0.3MM R/A RoHS : Compliant |
| 2,179 | ||
| 5047545100 | Molex | CONN FPC 51POS 0.3MM R/A RoHS : Compliant |
| 2,179 | ||
BUK9K45-100E,115![]() | Nexperia | MOSFET 2N-CH 100V 21A LFPAK56D RoHS : Compliant |
| 1,397 | ||
| 9451 008U500 | Belden Inc | 2 #22 PP FS PVC FR |
| 1,000 | ||
| 9451 006U1000 | Belden Inc | CABLE 2CON 22AWG BLUE SHLD |
| 1,000 | ||
| RLH-145-100-BK | Rip-Tie Inc | RECLSBLE FSTNR RECT 1" X 14.500" |
| 99 | ||
| 45100 | POWELL ELECTRONICS | ROLOC DISC PAD |
| 25 | ||
| MOT-I-81445-100 | ISL Products International | 32MM PLANETARY GEAR MOTOR - BRUS |
| 11 | ||
| 45100 | MAGELLAN DISTRIBUTION | ROLOC DISC PAD |
| 5 | ||
| SFP-10GB-DW45-100-C | Amphenol ProLabs | MSA and TAA 10GBase-DWDM 100GHz |
| 1 | ||
![]() Avnet Americas | SRN6045-100M | Bourns Inc | Power Inductor (SMD), 10 ?H, 2.5 A, Semishielded, 3 A, SRN6045 Series - Tape and Reel (Alt: SRN6045-100M) RoHS : Compliant |
| 12,000 | |
| 43045-1000 | Molex | Pin Header, 10 Contacts, 2 Rows, 3mm, Matte Tin, 8.5A, Right Angle, Shrouded, Brass Alloy, THT RA - Trays (Alt: 0430451000) RoHS : Compliant |
| 9,229 | ||
| 43045-1002 | Molex | Pin Header, 10 Contacts, 2 Rows, 3mm, Gold, 8.5A, Right Angle, Shrouded, Brass Alloy, Wire-to-Board - Trays (Alt: 0430451002) RoHS : Compliant |
| 7,030 | ||
| SRR7045-100M | Bourns Inc | Power Inductor (SMD), 10 ?H, 2 A, Shielded, 1.7 A, SRR7045 Series - Tape and Reel (Alt: SRR7045-100M) RoHS : Compliant |
| 5,000 | ||
| 43045-1009 | Molex | Conn Shrouded Header 10 POS 3mm Solder RA Surface Mount - Tape and Reel (Alt: 0430451009) RoHS : Compliant |
| 3,600 | ||
| 43045-1008 | Molex | Pin Header, 10 Contacts, 2 Rows, 3mm, Gold, 8.5A, Right Angle, Shrouded, Brass Alloy, Wire-to-Board - Tape and Reel (Alt: 0430451008) RoHS : Compliant |
| 1,400 | ||
| OQ0754510000G | Amphenol Corporation | - Bulk (Alt: OQ0754510000G) RoHS : Compliant |
| 690 | ||
| 0514510000 | Weidmüller Interface GmbH & Co. KG | - Bag (Alt: 0514510000) RoHS : Compliant |
| 20 | ||
| BPAL00060645100M09 | Pulse Electronics Corporation | Inductor Power Shielded Wirewound 10uH 20% 100kHz Ferrite 2.6A T/R - Tape and Reel (Alt: BPAL00060645100M09) RoHS : Compliant | 0 | |||
BUK9K45-100E,115![]() | Nexperia | - Tape and Reel (Alt: BUK9K45-100E,115) RoHS : Compliant |
| 0 | ||
| FW-12-03-L-D-245-100 | Samtec Inc | Board Stackers & Spacers, Pin Header, 6.22 mm, 24 Contacts, Solder, 2 Rows, 1.27 mm, FW Series - Bulk (Alt: FW-12-03-L-D-245-100) RoHS : Compliant | 0 | |||
| FW-12-05-L-D-445-100 | Samtec Inc | Board Stackers & Spacers, Pin Header, 11.3 mm, 24 Contacts, Solder, 2 Rows, 1.27 mm, FW Series - Bulk (Alt: FW-12-05-L-D-445-100) RoHS : Compliant | 0 | |||
| FW-25-05-G-D-545-100 | Samtec Inc | - Bulk (Alt: FW-25-05-G-D-545-100) RoHS : Compliant | 0 | |||
| FW-25-05-L-D-445-100-A-P-TR | Samtec Inc | - Tape and Reel (Alt: FW-25-05-L-D-445-100-A-P-TR) RoHS : Compliant |
| 0 | ||
| MW-10-03-G-D-145-100-P | Samtec Inc | - Rail/Tube (Alt: MW-10-03-G-D-145-100-P) RoHS : Compliant |
| 0 | ||
![]() Newark | SRN6045-100M | Bourns Inc | INDUCTOR, 10UH, SEMI SHIELDED, POWER; RoHS : Compliant |
| 10,000 | |
| SRN6045-100M | Bourns Inc | INDUCTOR, 10UH, SEMI SHIELDED, POWER; RoHS : Compliant |
| 10,000 | ||
| 0451002.MRL | Littelfuse Inc | FUSE SMD, 2A, VERY FAST ACTING, 125V; RoHS : Compliant |
| 1,000 | ||
| 8451 0081000 | Belden Inc | CBL, MULTIPAIR, SHIELDED, 1.0, 22AWG; RoHS : Compliant |
| 1,000 | ||
| SRN6045-100M | Bourns Inc | INDUCTOR, 10UH, SEMI SHIELDED, POWER; RoHS : Compliant |
| 1,000 | ||
| 43045-1006 | Molex | CONNECTOR, HEADER, 10POS, 2ROW, 3MM; (Alternate Part Number: 800754372336 RoHS : Compliant |
| 832 | ||
| 0451002.MRL | Littelfuse Inc | FUSE SMD, 2A, VERY FAST ACTING, 125V; RoHS : Compliant |
| 264 | ||
| 0451002.MRL | Littelfuse Inc | FUSE SMD, 2A, VERY FAST ACTING, 125V; RoHS : Compliant |
| 264 | ||
| 43045-1002 | Molex | CONNECTOR, HEADER, 10POS, 2ROW, 3MM; RoHS : Compliant |
| 156 | ||
| 691244510004 | Wurth Elektronik | TB, WIRE TO BRD, R/A, 4WAY, 12AWG; RoHS : Compliant |
| 31 | ||
| 9451 008U500 | Belden Inc | SHIELDED MULTIPAIR CABLE 1PR 500FT 300V; RoHS : Compliant |
| 6 | ||
| FAA-IST-4.5-100-NP-1.0-C2-T-I | Labfacility Limited | THERMOCOUPLE, TYPE T, 100MM, 250DEG C; RoHS : Compliant |
| 6 | ||
| 05005451001 | Wera | IMPAKTOR SOCKET SET, 3/8" DRIVE, 10PC; RoHS : Compliant |
| 4 | ||
| LPXTRJ45-100TX | L-com Inc | 10/100BT DATA LINE PROTECTOR, 12VDC; Available until stocks are exhausted RoHS : Compliant |
| 2 | ||
| 095-902-451-008 | Amphenol RF | RF CABLE ASSEMBLY, SMA STR PLUG, 8"; Cable Length - Imperial:8"; Cable Length - Metric:203mm; Coaxial Cable Type:TFlex 405; Connector Type A:SMA Straight Plug; Connector Type B:SMA Straight Plug; Impedance:50ohm; Jacket Color:- RoHS Compliant: Yes RoHS : Compliant |
| 1 | ||
![]() RS | 0451001.MRL | Littelfuse Inc | FAST-ACTING SMD CERAMIC FUSE, 1A, 125V, NANO2 SERIES RoHS : Compliant |
| 93 | |
| 0451004.MRL (5413423P) | Littelfuse Inc | FUSE, BOARD MOUNT, 4A, 125VAC/VDC 2SMD |
| 77 | ||
| 09451001560 | HARTING Technology Group | HAN 3A RJ45 10G CAT6 PLUG INSERT 8P IDC RoHS : Compliant |
| 38 | ||
| 0451003.MRL (5413417P) | Littelfuse Inc | FUSE, BOARD MOUNT, 3A, 125VAC/VDC 2SMD |
| 32 | ||
| 4510022 | Lapp Group | HOOK-UP WIRE,0.75MM2,STRANDED, BC, BLUE PVC INS RoHS : Compliant |
| 30 | ||
| 43045-1002 | Molex | HEADER,2 ROW, RIGHT-ANGLE, SNAP-IN LOCK,10 PIN, GOLD PLATE, SMT/GLOW WIRE COMPATIBLE RoHS : Compliant |
| 20 | ||
| 09488484745100 | HARTING Technology Group | RJ45 CABLE ASSEMBLY VARIOBOOT, RJ45 (UP-DOWN)-RJ45 (UP-DOWN),CAT6A YELLOW,10MM RoHS : Compliant |
| 9 | ||
| 0451001.NRL (7693719) | Littelfuse Inc | FUSE, 1A FF NON-RESETTABLE, SURFACE MOUNT, 125 V AC |
| 5 | ||
| 2451001 (25531164) (MPFI02506000-050RS) | RS Pro | SCREW, 1/4-20 X 6 PHILLIPS FLAT MACHINE, ZINC PLATED |
| 5 | ||
| 2451003 (25531170) (MPFI03101250X-100RS) | RS Pro | SCREW, 5/16-18 X 1 1/4 PHILLIPS FLAT MACHINE, ZINC PLATED |
| 5 | ||
| 89451001 | Crouzet | DIN RAIL 24VDC POWER SUPPLY 10W, 100-240VAC/24VDC, 0.4 A |
| 4 | ||
| NI12U-M18-AP6X (1645100) | TURCK Inc | PROXIMITY SENSOR, M18X1 THREADED BARREL, 3 WIRE, 10-30VDC, 2 METER |
| 2 | ||
| 9451 006U1000 | Belden Inc | MULTICONDUCTOR CABLE, 1PR/22AWG, 7X30, TC, PP INS, FOIL, BLUE PVC |
| 1 | ||
| NVAP45-100-SR | Norgren | VALVE, 5/2 MINI MANUAL, NYLON PUSH BUTTON, SPRING RETURN, 10-32 PORTS |
| 1 | ||
| CBL-M12D(MM4P)/RJ45-100 IP67 | Moxa Inc | CAT-5E UTP ETHERNET CABLE,1-METER M12-TO-RJ45, WATERPROOF 4-PIN D-CODED |
| 1 | ||
![]() Microchip Technology Inc | GC4510-00 | Microchip Technology Inc | Si NIP Non Hermetic Chip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | ||
| 090-14451-001 | Microchip Technology Inc | TIMEPROVIDER XT DISTRIBUTION MODULE, Projected EOL: 2051-05-07 - Contact for Pricing | 0 | |||
![]() Rochester Electronics | PSMN045-100HLX | Nexperia | N-channel 100 V, 45 mOhm, logic level MOSFET in LFPAK56D using TrenchMOS technology RoHS : Compliant |
| 1,140 | |
| DZ2451000L | ROHM Semiconductor | Zener Diode |
| 240,000 | ||
| DZ245100ZL | ROHM Semiconductor | Zener Diode |
| 42,000 | ||
![]() Sager | FW-12-03-L-D-245-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | ||
| FW-12-05-L-D-445-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-25-05-G-D-545-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-25-05-L-D-445-100-A-P-TR | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Micro Board Stacking Header, 0.050 Pitch RoHS : Compliant |
| 0 | ||
| FW-28-05-L-D-345-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-30-05-L-D-445-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-33-05-L-D-545-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-04-05-G-D-445-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| MW-10-03-G-D-145-100-P | Samtec Inc | Board to Board & Mezzanine Connectors 1.00 mm Flex Stack, Flexible Micro Board Stacker, Surface Mount RoHS : Compliant |
| 0 | ||
| 8860004510016 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 8860004510098 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| D62451-000 | TE Connectivity | TE Connectivity D-SCE-6.4-50-S1-6-CS34034 |
| 0 | ||
| 9764510018 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9864510004 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9864510086 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() TME | 0060100245100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 2.45mm; high speed steel; MAYKESTAG |
| 22 | |
| 10345100 | Lapp Group | Connector: HDC; module; female; EPIC® MC; PIN: 2; 82A; 1kV; 10÷25mm2 RoHS : Compliant |
| 8 | ||
| 451.00 | Proctor & Gamble | Countersink manual; Ø: 12mm |
| 0 | ||
| 66.1045-10021 | Stäubli Electrical Connectors | Test lead: single; 19A; banana socket 4mm,banana plug 4mm; black |
| 0 | ||
| 00845 10 000 1000 | RECA | Screw; M5; M5x10; 0.8; Head: cheese head; hex key; HEX 4mm; steel |
| 0 | ||
| 1924510000 | Weidmüller Interface GmbH & Co. KG | Splice terminal: rail; Z; 24A; 800V; clamp; wemid; 24AWG÷12AWG; TS35 RoHS : Compliant |
| 0 | ||
| 2694510050 | Weidmüller Interface GmbH & Co. KG | Cable: patch cord; angled,male,straight; Cores: 8; PE,PUR; 6.7mm RoHS : Compliant |
| 0 | ||
| KL-145/100/SW | Seifert Electronic GmbH & Co Kg | Heatsink: extruded; grilled; black; L: 100mm; W: 200mm; H: 40mm |
| 0 | ||
| EA19N E45100000008 | LUMEL SA | Ammeter; on panel; I AC: 0÷1.5kA; 40÷72Hz; Length: 97mm; EA19 |
| 0 | ||
| EA19N F451000000C0 | LUMEL SA | Ammeter; on panel; I AC: 0÷1.5kA; 40÷72Hz; Length: 97mm; EA19 |
| 0 | ||
| P 4145-100A | PeakTech Prüf- und Messtechnik GmbH | Current clamp; Øcable: 13mm; 50÷400Hz; 0÷100A; 0.2%; BNC (m) |
| 0 | ||
| BE271TF4510007 | LUMEL SA | Ammeter; on panel; I AC: 0÷1.5kA; Features: working position 90° |
| 0 | ||
| BE391MF4510007 | LUMEL SA | Ammeter; on panel; I AC: 0÷1.5kA; Features: working position 90° |
| 0 | ||
| T31804510000G | Amphenol Anytek | Connector: PCB terminal block; terminal; T3; 8A; PIN: 18; angled |
| 0 | ||
| VL2614510000G | Amphenol Anytek | Connector: pluggable terminal block; socket; male; 10A; 300V; THT |
| 0 | ||
![]() ComSIT USA | 0451001MRL | Littelfuse Inc | AVAILABLE EU | 4,046 | ||
| 0451002MRL | Littelfuse Inc | AVAILABLE EU | 5,890 | |||
| 0451003MRL | Littelfuse Inc | AVAILABLE EU | 110 | |||
| 0451005NRL | Littelfuse Inc | AVAILABLE EU | 37 | |||
| 0451007MRL | Littelfuse Inc | AVAILABLE EU | 787 | |||
| SRN6045100M | BOURNS INC. | AVAILABLE EU | 906 | |||
| SRN6045100M | Bourns Inc | AVAILABLE EU | 514 | |||
| 7447745100 | WUERTH ELEKTRONIK ITALIA SRL | AVAILABLE EU | 1,191 | |||
![]() ComSIT USA | 0451002MRL | Littelfuse Inc | SURFACE MOUNT FUSE Electric Fuse, Very Fast Blow, 2A, 125VAC, 125VDC, 50A (IR), Surface Mount, NANO RoHS : Compliant | 11,375 | ||
| 0451005MR | Littelfuse Inc | SURFACE MOUNT FUSE Electric Fuse, Very Fast Blow, 5A, 125VAC, 125VDC, 50A (IR), Surface Mount, NANO RoHS : Compliant | 5,990 | |||
| 0451004MRL | Littelfuse Inc | SURFACE MOUNT FUSE Electric Fuse, Very Fast Blow, 4A, 125VAC, 125VDC, 50A (IR), Surface Mount, NANO RoHS : Compliant | 5,580 | |||
| 0451005MRL | Littelfuse Inc | SURFACE MOUNT FUSE Electric Fuse, Very Fast Blow, 5A, 125VAC, 125VDC, 50A (IR), Surface Mount, NANO RoHS : Compliant | 3,000 | |||
| 430451006 | Molex | RIGHT ANGLE HEADER, 3.00MM PITCH, DUAL ROW, 10 CIRCUIT Rectangular Power Connector, 10 Contact(s), Male, Surface Mount Terminal RoHS : Not Compliant | 1,600 | |||
| 0451001MRL | Littelfuse Inc | SURFACE MOUNT FUSE Electric Fuse, Very Fast Blow, 1A, 125VAC, 125VDC, 50A (IR), Surface Mount, NANO RoHS : Compliant | 660 | |||
| 744045100 | Adolf Wuerth Gmbh & Co Kg | WE-LQ SMT POWER INDUCTOR General Purpose Inductor, 10uH, 20%, 1 Element, Ferrite-Core, SMD, 1812 RoHS : Compliant | 380 | |||
| 214451006 | TE Connectivity | RIGHT ANGLE HEADER ASSEMBLE MICRO MATE-N-LOK 3 MM CONNECTOR SYSTEM Power Connector, 6 Contact(s), Male, Solder Terminal, Plug RoHS : Compliant | 215 | |||
![]() GLYN GmbH & Co. KG | 451-00001C | Qnity Laird | BL654 - Bluetooth v5 / 802.15.4 / NFC Module (Nord RoHS : Compliant | 47 | ||
![]() Interstate Connecting Components | OQ1654510000G | Amphenol Anytek | OQ 5.08 16P GREEN LOGO CLOSE | 0 | ||
| 942-98345-10095 | Amphenol Fiber Optic Products | JUMPER, LC/UPC, 1.2MM, SINGLE ERROR:#REF! | 0 | |||
| D62451-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCD-SCE-6.4-50-S1-6-CS34034 | 0 | |||
| 942-98345-10040 | Amphenol Fiber Optic Products | JUMPER, LC/UPC, 1.2MM, SINGLE ERROR:#REF! | 0 | |||
| ID451000 | Amphenol Commercial | RUGGED BULKHEAD ADAPTER, RECPT |
| 0 | ||
| F84510-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCHTCM-SCE-TP-2.5K-1/4-4H-9 | 0 | |||
| 095-902-451-009 | Amphenol RF | SMA ST P TO SMA ST P 9 TFLEX 405 CBL, SS ANTI-TORQ |
| 0 | ||
| TXR54AB45-1006AI | TE Connectivity | TXR54AB45-1006AI RoHS : Not Compliant | 0 | |||
| 20009451-00 | TE Connectivity | PT9600-0400-121-F51 | 0 | |||
| 155545-1001 | ITT Interconnect Solutions | MKJ3A2W8-13SN | 0 | |||
| 20034451-00 | TE Connectivity | 315M-A-P6B-3S-036-B: CTO-13500 | 0 | |||
| 188451-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55A6370-16-9/96-9CS282 | 0 | |||
| T30304510000G | Amphenol Anytek | T3-5.0-3P GREEN - TAIL LENG | 0 | |||
| 10-305451-006 | Amphenol Aerospace |
| 0 | |||
| 1101045100150 | Amphenol PCD | PROTECTED RAIL LX0150MM | 0 | |||
![]() NexGen Digital | 0451002.MRL | Littelfuse Inc | RoHS : Compliant | 7,796 | ||
| G125-4510000B | Harwin | RoHS : Compliant | 667 | |||
![]() PEI Genesis | 172845-1004 | SOURIAU-SUNBANK |
| 0 | ||
| 001101045100060 | Amphenol PCD |
| 0 | |||
| 001101045100110 | Amphenol PCD |
| 0 | |||
| 001101045100140 | Amphenol PCD |
| 0 | |||
| 45100RC106S50 | Amphenol Socapex |
| 0 | |||
| TJT045100 | Amphenol PCD |
| 0 | |||
| 217-8545-100 | ITT Interconnect Solutions |
| 0 | |||
| 001101045100120 | Amphenol PCD |
| 0 | |||
| 001101045100150 | Amphenol PCD |
| 0 | |||
| 451000-0001 | Filconn |
| 0 | |||
| 001101045100090 | Amphenol PCD |
| 0 | |||
| 001101045100070 | Amphenol PCD |
| 0 | |||
| 45100R18-32P50 | Amphenol Socapex |
| 0 | |||
| A51-451-0000-220 | ITT Interconnect Solutions |
| 0 | |||
| 50-451-0000-220 | ITT Interconnect Solutions |
| 0 | |||
![]() Powell Electronics | ZW-04-11-L-D-645-100 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 1,028 | |
| TW-05-07-G-D-445-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 245 | ||
| TW-08-12-L-S-945-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 222 | ||
| TW-12-03-L-S-245-100 | Samtec Inc | Cable Assembly, Wire-to-Board, Through-H RoHS : Compliant |
| 200 | ||
| TW-11-02-L-S-145-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 174 | ||
| TW-11-04-T-S-145-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 174 | ||
| TW-20-03-G-D-345-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 120 | ||
| 2-1445100-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 99 | ||
| F84510-000 | TE Connectivity | Connectors |
| 85 | ||
| TW-20-12-LM-D-745-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 61 | ||
| TXR40AB45-1007AI | TE Connectivity | Connectors RoHS : Not Compliant |
| 34 | ||
| ID451000 | Amphenol Corporation | Connector |
| 32 | ||
| TW-30-07-T-Q-545-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 26 | ||
| 11107451-00 | TE Connectivity | SENSOR (TE REF 11107451-00) RoHS : Not Compliant |
| 2 | ||
| TXR54AB45-1006AI | TE Connectivity | Connectors RoHS : Not Compliant |
| 1 | ||
![]() Chip 1 Exchange | 10132797-045100LF | Amphenol Corporation | INSTOCK | 136,500 | ||
| 94510-0103 | Molex | INSTOCK RoHS : Compliant | 52,650 | |||
| 43045-1002 | Molex | INSTOCK RoHS : Compliant | 25,617 | |||
| 430451009 | Molex | INSTOCK | 13,236 | |||
| 744045100 | INSTOCK | 6,029 | ||||
| 43045-1007 | Molex | INSTOCK RoHS : Compliant | 4,290 | |||
| 0451005.MRL | INSTOCK | 4,215 | ||||
| 0451002.MRL | INSTOCK | 2,000 | ||||
| R451004 | INSTOCK | 1,535 | ||||
| 1P0451005.MRL | Littelfuse Inc | INSTOCK | 938 | |||
| 451.007MRL | INSTOCK | 936 | ||||
| R451007 | INSTOCK | 863 | ||||
| 0451005MRL | INSTOCK | 834 | ||||
| PK145-10017 | INSTOCK | 468 | ||||
| 0451001.MRL | Littelfuse Inc | INSTOCK RoHS : Compliant | 440 | |||
![]() Avnet Abacus | 430451009 | Molex | Conn Shrouded Header 10 POS 3mm Solder RA Surface Mount - Tape and Reel (Alt: 430451009) RoHS : Compliant | 42,200 | ||
| SRN6045-100M | Bourns Inc | Power Inductor SMD 10 H 25 A Semishielded 3 A SRN6045 Series - Tape and Reel (Alt: SRN6045-100M) RoHS : Compliant | 40,000 | |||
| 86564510065LF | Amphenol Corporation | Contact PIN Crimp ST Cable Mount Reel (Alt: 86564510065LF) RoHS : Compliant | 40,000 | |||
| 430451000 | Molex | Pin Header Power WiretoBoard 3 mm 2 Rows 10 Contacts Through Hole Right Angle (Alt: 430451000) RoHS : Compliant | 25,398 | |||
| SDCH1V6045-100M-R | Eaton Corporation | - Tape and Reel (Alt: SDCH1V6045-100M-R) RoHS : Compliant | 21,000 | |||
| 430451002 | Molex | Pin Header Power WiretoBoard 3mm 2 Rows 10 Contacts Through Hole Right Angle (Alt: 430451002) RoHS : Compliant | 6,723 | |||
| 430451001 | Molex | Pin Header WiretoBoard 3 mm 2 Rows 10 Contacts Through Hole Right Angle (Alt: 430451001) RoHS : Compliant | 6,120 | |||
| 430451006 | Molex | Conn Wire to Board HDR 10 POS 3mm Solder RA SMD Embossed TR - Tape and Reel (Alt: 430451006) RoHS : Compliant | 1,800 | |||
| 430451000 | Molex | Pin Header Power WiretoBoard 3 mm 2 Rows 10 Contacts Through Hole Right Angle (Alt: 430451000) RoHS : Compliant | 1,632 | |||
| C94510-000 | TE Connectivity | (Alt: C94510-000) RoHS : Compliant | 0 | |||
| F84510-000 | TE Connectivity | (Alt: F84510-000) RoHS : Compliant | 0 | |||
| F84510-000 | TE Connectivity | (Alt: F84510-000) RoHS : Compliant | 0 | |||
| 5047545100 | Molex | - Tape and Reel (Alt: 5047545100) RoHS : Compliant | 0 | |||
| 5047545100 | Molex | - Tape and Reel (Alt: 5047545100) RoHS : Compliant | 0 | |||
| OQ1654510000G | Amphenol Corporation | (Alt: OQ1654510000G) RoHS : Compliant | 0 | |||
![]() Avnet Asia | X1G004451000800 | Epson Electronics America Inc | (Alt: X1G004451000800) RoHS : Compliant |
| 4,000 | |
| X1G004451000212 | Epson Electronics America Inc | (Alt: X1G004451000212) RoHS : Compliant |
| 1,250 | ||
| OQ0254510000G | Amphenol Corporation | Terminal Block, Header, 5.08 mm, 2 Ways, 20 A, 300 V, Through Hole Right Angle (Alt: OQ0254510000G) RoHS : Compliant |
| 350 | ||
BUK9K45-100E,115![]() | Nexperia | (Alt: BUK9K45-100E,115) RoHS : Compliant | 0 | |||
| 0430451001 | Molex | Pin Header, 10 Contacts, 2 Rows, 3mm, Gold, 8.5A, Right Angle, Shrouded, Brass Alloy, Wire-to-Board (Alt: 0430451001) RoHS : Compliant | 0 | |||
| 10137945-10022RLF | Amphenol Corporation | (Alt: 10137945-10022RLF) RoHS : Compliant | 0 | |||
| 2-1445100-2 | TE Connectivity | Conn Power Header 2 POS 3mm Solder RA SMD 2 Terminal Single Port (Alt: 2-1445100-2) RoHS : Compliant |
| 0 | ||
| X1G004451009700 | Epson Electronics America Inc | SG5032CAN 25.000000 MHZ TDBA (Alt: X1G004451009700) RoHS : Compliant | 0 | |||
| X1G004451003600 | Epson Electronics America Inc | (Alt: X1G004451003600) RoHS : Compliant | 0 | |||
| 2-1445100-4 | TE Connectivity | Conn Power HDR 4 POS 3mm Solder RA SMD 4 Terminal 1 Port (Alt: 2-1445100-4) RoHS : Compliant | 0 | |||
| 10132797-045100LF | Amphenol Corporation | Stacking Board Connector, FCI BergStak 10132797 series, 40 Contacts, Header, 0.5 mm (Alt: 10132797-045100LF) RoHS : Compliant | 0 | |||
| PSMN045-100HLX | Nexperia | (Alt: PSMN045-100HLX) RoHS : Compliant | 0 | |||
| X1G004451000400 | Epson Electronics America Inc | (Alt: X1G004451000400) RoHS : Compliant | 0 | |||
| OQ0354510000G | Amphenol Corporation | Terminal Block, Header, 5.08 mm, 3 Ways, 20 A, 300 V, Through Hole Right Angle (Alt: OQ0354510000G) RoHS : Compliant | 0 | |||
| X1G004451000712 | Epson Electronics America Inc | (Alt: X1G004451000712) RoHS : Compliant | 0 | |||
![]() Avnet Silica | BUK7K45-100EX![]() | Nexperia | (Alt: BUK7K45-100EX) RoHS : Compliant | 3,000 | ||
| CASI245-100 | Antenova M2M | RF Cable Assembly IPEX MHF1 Right Angle Plug to SMA Bulkhead Jack 100m (Alt: CASI245-100) RoHS : Compliant | 0 | |||
| HXR45100-DNU | Renesas Electronics Corporation | (Alt: HXR45100-DNU) RoHS : Compliant | 0 | |||
| PSMN045-100HLX | Nexperia | (Alt: PSMN045-100HLX) RoHS : Compliant | 0 | |||
BUK9K45-100E,115![]() | Nexperia | (Alt: BUK9K45-100E,115) RoHS : Compliant | 0 | |||
| L0F2-B445100005001 | Lumileds | LED UniColor Royal Blue Chip LED 2Pin SMD TR (Alt: L0F2-B445100005001) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AHP24510.07.0100C | Taoglas Antenna Solutions | Active GNSS L1,L2 L-Band Stacked 45*45*10mm Patch 100mm 1.37 IPEX MHFI |
| 0 | |
![]() DB Roberts | 304510041556 | Essentra Components | 0 | |||
| 304510041152 | Essentra Components | 0 | ||||
| 304510040050 | Essentra Components | 0 | ||||
| E5-1-045-100 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-2-045-100 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 3451000 | Essentra Components | 0 | ||||
| 5662-TE-145-100-121 | RAF Electronic Hardware | 0 | ||||
| 1114510000VR | Essentra Components | 0 | ||||
![]() EBV Elektronik | AHP24510.07.0100C | Taoglas Antenna Solutions | L1L2 LBAND ANT (Alt: AHP24510.07.0100C) RoHS : Compliant | 0 | ||
| SGM2045-1.00XXDH4G/TR | SG Micro Corp | (Alt: SGM2045-1.00XXDH4G/TR) RoHS : Compliant | 0 | |||
![]() Master Electronics | FW-09-05-G-D-345-100-A | Samtec Inc | RoHS : Compliant |
| 0 | |
| FW-12-03-L-D-245-100 | Samtec Inc | Conn Board Stacker HDR 24 POS 1.27mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| FW-12-05-L-D-445-100 | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-25-05-G-D-545-100 | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-28-05-L-D-345-100 | Samtec Inc | Conn Board Stacker HDR 56 POS 1.27mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| FW-30-05-L-D-445-100 | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-33-05-L-D-545-100 | Samtec Inc | Conn Board Stacker HDR 66 POS 1.27mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| FW-04-05-G-D-445-100 | Samtec Inc | Conn Board Stacker HDR 8 POS 1.27mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| FW-06-02-L-D-245-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MW-10-03-G-D-145-100-P | Samtec Inc | 1.00 mm Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| D62451-000 | TE Connectivity | D-SCE-6.4-50-S1-6-CS34034 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 99-0145-10-07 | Franz Binder GmbH & Co | M16 IP40 Male angled connector Contacts: 7 (07-a) 4.0-6.0mm shieldable solder IP40 RoHS : Compliant |
| 0 | ||
| C94510-000 | TE Connectivity | RPS-5K-22-18/2.0-SS3-4 MOQ Reduction RoHS : Compliant |
| 0 | ||
| FW-13-05-L-D-345-100 | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-16-03-L-D-245-100 | Samtec Inc | Conn Board Stacker HDR 32 POS 1.27mm Solder ST SMD RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 8451 0081000 | Belden Inc | Cable, 22AWG, 1Pair black red Tinned Copper, SHIELD, 1000ft, SPOOL GRAY, TC drain wire, PVC jacket |
| 50 | |
| 09149451002 | HARTING Technology Group | Modular Connectors / Ethernet Connectors Han Domino RJ45 cube, IDC cat6 M.1 RoHS : Compliant |
| 50 | ||
| 0451007.NRL | Littelfuse Inc | Surface Mount Fuses 125VAC 7A .009ohms 451 NANO2 RoHS : Compliant |
| 50 | ||
| 19045-1000 | Molex | Self-Contained Power Connector Solid Nonmetallic Sheathed Cable 12-14 AWG COC-1 |
| 50 | ||
| 09451001520 | HARTING Technology Group | Modular Connectors / Ethernet Connectors Han3A RJ45 GL Cat6A plug insert 8p RoHS : Compliant |
| 50 | ||
| 09451001560 | HARTING Technology Group | Modular Connectors / Ethernet Connectors RJI IP67 PLUG HAN3A INSERT 10G RoHS : Compliant |
| 50 | ||
| 09451451000 | HARTING Technology Group | HARTING PushPull V4 v2.0 Mini DisplayPort cable assembly, double ended, 0.5m RoHS : Compliant |
| 20 | ||
| CBL-M12D(MM4P)/RJ45-100 IP67 | Moxa Inc | 1-meter M12-to-RJ45 Cat-5E UTP Ethernet cable with waterproof 4-pin D-coded M12 connector |
| 9 | ||
| 09451451003 | HARTING Technology Group | HARTING PushPull V4 v2.0 Mini DisplayPort cable assembly, double ended, 2.0m RoHS : Compliant |
| 8 | ||
| 2544510000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks RJ45G1 R1D 3.3E4G/Y TY RoHS : Compliant |
| 0 | ||
| MF45100V1-1000U-A99 | SUNON USA | DC Fans DC Axial Fan, 45x45x10mm, 5VDC, Vapo, Lead Wires, Auto Restart, D04164720G-00 RoHS : Compliant |
| 0 | ||
| 82404-510-039 PT-10 BONE KIT | PacTec | Enclosures, Boxes, & Cases 7.9 x 11 x 3 BONE PT-10 KIT |
| 0 | ||
| 1451-005G-T | TE Connectivity | Board Mount Pressure Sensors 0-5psig TUBE PORT RoHS : Compliant |
| 0 | ||
| EE45100S1-000U-999 | SUNON USA | DC Fans Axial Fan, 45x45x10mm, 5VDC, 11CFM, 1.3W, 32dBA, 6000RPM, 0.17"H2O, Sleeve, Wire |
| 0 | ||
| 82404-510-000 PT-10 BLACK KIT | PacTec | Enclosures, Boxes, & Cases 7.9 x 11 x 3 BLACK PT-10 KIT |
| 0 | ||
![]() Pasternack Enterprises US | PE3C6345-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Outdoor Rated N Male to N Male Low PIM Cable 100 cm Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated N male to N male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-NM-LP type N to TC-250-NM-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-NM-LP N type cable connection on one end and TC-250-NM-LP N type cable connection on the other. Our low PIM TC-250-NM-LP type N to TC-250-NM-LP type N cable assemblies have a male gender on end 1 and male on end 2. This TC-250-NM-LP type N to TC-250-NM-LP N type cable is a male to male coax assembly, PE3C6345-100CM, can also be known as a low PIM TC-250-NM-LP type N plug to TC-250-NM-LP N type plug cable assembly and will be shipped same-day as it is purchased. TC-250-NM-LP type N plug to TC-250-NM-LP type N plug cable assembly PE3C6345-100CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-NM-LP N cable assembly is manufactured with TC-250-NM-LP type N to TC-250-NM-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-NM-LP N type male to TC-250-NM-LP type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-250-NM-LP type N plug to TC-250-NM-LP type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-NM-LP N type to TC-250-NM-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-NM-LP N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts. |
| 871 | |
| PE3C6845-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm, Length: 39.37 inches. BNC Male to BNC Male Right Angle Cable 100 CM Length Using 53 Ohm RG55 Coax., Radio frequency assembly BNC male to BNC male right angle cable 100 cm length using 53 Ohm RG55 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male right angle cable 100 cm length using 53 Ohm RG55 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and right angle BNC cable connection on the other. Our BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C6845-100CM, can also be known as a BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C6845-100CM is built with RG55 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency BNC male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6845-100CM can also be used in the other direction and will be right angle BNC male to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male right angle cable 100 cm length using 53 Ohm RG55 coax. |
| 282 | ||
| PE3W00245-100CM | Pasternack Enterprises |
| 94 | |||
| PE3M0045-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/84-RG223-0XDS2, RF Cable Type: M17/84-RG223, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. MIL-DTL-17 N Female to SMA Male Cable 100 cm Length Using M17/84-RG223 Coax., Radio frequency assembly MIL-DTL-17 N female to SMA male cable 100 cm length using M17/84-RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female to SMA male cable 100 cm length using M17/84-RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/02-0503 type N to M39012/55-3028 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/02-0503 N type cable connection on one end and M39012/55-3028 SMA cable connection on the other. Our M39012/02-0503 type N to M39012/55-3028 SMA cable assemblies have a female gender on end 1 and male on end 2. This M39012/02-0503 type N to M39012/55-3028 SMA cable is a female to male coax assembly, PE3M0045-100CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/02-0503 type N jack to M39012/55-3028 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/02-0503 N type jack to M39012/55-3028 SMA plug cable assembly PE3M0045-100CM is built with M17/84-RG223 which is a flexible coax type. The Pasternack flexible M39012/02-0503 N cable assembly is manufactured with M39012/02-0503 N type to M39012/55-3028 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/02-0503 type N female to M39012/55-3028 SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0045-100CM can also be used in the other direction and will be M39012/55-3028 SMA male to M39012/02-0503 type N female cable assembly if the opposite connectivity is required. M39012/02-0503 type N jack to M39012/55-3028 SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/02-0503 type N to M39012/55-3028 SMA cable assembly for quick shipment worldwide. Variations of M39012/02-0503 N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female to SMA male cable 100 cm length using M17/84-RG223 coax. |
| 83 | ||
| PE3C6445-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-375, RF Cable Type: SPF-375, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Fire Rated 4.3-10 Male to 4.3-10 Male Low PIM Cable 100 cm Length Using SPF-375 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 4.3-10 male to 4.3-10 male low PIM cable 100 cm length using SPF-375 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 4.3-10 male to 4.3-10 male low PIM cable 100 cm length using SPF-375 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-375-4310M-LP 4.3-10 to TC-375-4310M-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-375-4310M-LP 4.3-10 cable connection on one end and TC-375-4310M-LP 4.3-10 cable connection on the other. Our low PIM TC-375-4310M-LP 4.3-10 to TC-375-4310M-LP 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This TC-375-4310M-LP 4.3-10 to TC-375-4310M-LP 4.3-10 cable is a male to male coax assembly, PE3C6445-100CM, can also be known as a low PIM TC-375-4310M-LP 4.3-10 plug to TC-375-4310M-LP 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. TC-375-4310M-LP 4.3-10 plug to TC-375-4310M-LP 4.3-10 plug cable assembly PE3C6445-100CM is built with SPF-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-375-4310M-LP 4.3-10 cable assembly is manufactured with TC-375-4310M-LP 4.3-10 to TC-375-4310M-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM TC-375-4310M-LP 4.3-10 male to TC-375-4310M-LP 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-375-4310M-LP 4.3-10 plug to TC-375-4310M-LP 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-375-4310M-LP 4.3-10 to TC-375-4310M-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-375-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 4.3-10 male to 4.3-10 male low PIM cable 100 cm length using SPF-375 coax using Times Microwave parts. |
| 43 | ||
| PE3C6245-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum 4.3-10 Male Right Angle to SMA Male Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male right angle to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male right angle to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-SM-LP SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle TC-250-4310M-RA-LP 4.3-10 cable connection on one end and TC-SPP250-SM-LP SMA cable connection on the other. Our low PIM right angle TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-SM-LP SMA cable assemblies have a male gender on end 1 and male on end 2. This TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-SM-LP SMA cable is a male to male coax assembly, PE3C6245-100CM, can also be known as a low PIM right angle TC-250-4310M-RA-LP 4.3-10 plug to TC-SPP250-SM-LP SMA plug cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-RA-LP 4.3-10 plug to TC-SPP250-SM-LP SMA plug cable assembly PE3C6245-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-RA-LP 4.3-10 cable assembly is manufactured with right angle TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-SM-LP SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-RA-LP 4.3-10 right angle male to TC-SPP250-SM-LP SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6245-100CM can also be used in the other direction and will be TC-SPP250-SM-LP SMA male to right angle TC-250-4310M-RA-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-RA-LP 4.3-10 right angle plug to TC-SPP250-SM-LP SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-SM-LP SMA cable assembly for quick shipment worldwide. Variations of TC-250-4310M-RA-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male right angle to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 19 | ||
| PE3M0145-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Temperature Conditioned SMA Female Bulkhead to SMA Male Right Angle Low Loss Cable 100 cm Length Using PE-P142LL Coax., Pasternack temperature conditioned SMA female bulkhead to SMA male right angle low loss cable 100 cm length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0145-100CM is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability SMA to SMA cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with SMA connection on one end and right angle SMA connection on the other. Our low loss SMA to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This SMA to SMA cable is a female to male coax assembly. PE3M0145-100CM can also be known as a temperature conditioned low loss SMA jack to right angle SMA plug cable assembly and will be shipped the same day after it is purchased. SMA jack to SMA plug cable assembly PE3M0145-100CM is built with PE-P142LL which is a flexible coax. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency SMA female to SMA right angle male cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0145-100CM can be used in the other direction and will be right angle SMA male to SMA female cable assembly. Pasternack high reliability low loss SMA jack to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for same-day shipment worldwide. Variations of PE45525 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned SMA female bulkhead to SMA male right angle low loss cable 100 cm length using PE-P142LL coax. |
| 0 | ||
| PE3C5845-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum 4.1/9.5 Mini DIN Female to SMA Male Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.1/9.5 mini DIN female to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.1/9.5 mini DIN female to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to SMA cable assemblies have a female gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to SMA cable is a female to male coax assembly, PE3C5845-100CM, can also be known as a low PIM 4.1/9.5 mini DIN jack to SMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN jack to SMA plug cable assembly PE3C5845-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5845-100CM can also be used in the other direction and will be SMA male to 4.1/9.5 mini DIN female cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN female to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder. |
| 0 | ||
| PE3W07145-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. BNC Female Bulkhead to TNC Male Right Angle Low Loss Cable 100 CM Length Using LMR-100 Coax., Radio frequency assembly BNC female bulkhead to TNC male right angle low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC female bulkhead to TNC male right angle low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC bulkhead cable connection on one end and a right angle TNC cable connection on the other. Our low loss BNC to right angle TNC cable assembly has a female gender on end 1 and a male on end 2. PE3W07145-100CM can also be known as a low loss BNC jack to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W07145-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our bulkhead BNC female to right angle TNC male cable has a maximum VSWR of 1.4:1. BNC jack to TNC plug cable assembly PE3W07145-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W07145-100CM can also be used in the other direction and will be a right angle TNC male to BNC female bulkhead cable assembly if the opposite connectivity is required. Low loss BNC jack bulkhead to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE345-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Male to N Male Right Angle Low Loss Test Cable 100 CM Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N male to N male right angle low loss test cable 100 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle low loss test cable 100 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with type N cable connection on one end and right angle N type cable connection on the other. Our low loss test type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE345-100CM, can also be known as a low loss test type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE345-100CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE345-100CM can also be used in the other direction and will be right angle type N male to N type male cable assembly if the opposite connectivity is required. Low loss test N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss test cable 100 cm length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE3W12745-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to MMCX Plug Right Angle Low Loss Cable 100 CM Length Using LMR-100A-UF Coax., Radio frequency assembly SMA male to MMCX plug right angle low loss cable 100 cm length using LMR-100A-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to MMCX plug right angle low loss cable 100 cm length using LMR-100A-UF coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMCX cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle MMCX cable connection on the other. Our low loss SMA to right angle MMCX cable assemblies have a male gender on end 1 and plug on end 2. PE3W12745-100CM can also be known as a low loss SMA plug to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to MMCX male cable assembly PE3W12745-100CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MMCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to MMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12745-100CM can also be used in the other direction and will be right angle MMCX plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MMCX plug right angle low loss cable 100 cm length using LMR-100A-UF coax. |
| 0 | ||
| PE3C3245-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male Right Angle to N Female Bulkhead Low Loss Test Cable 100 cm Length Using PE-P300LL Coax, RoHS., Radio frequency assembly SMA male right angle to N female bulkhead low loss test cable 100 cm length using PE-P300LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to N female bulkhead low loss test cable 100 cm length using PE-P300LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with right angle SMA cable connection on one end and type N bulkhead cable connection on the other. Our low loss test right angle SMA to N type cable assemblies have a male gender on end 1 and female on end 2. This SMA to type N cable is a male to female coax assembly, PE3C3245-100CM, can also be known as a low loss test right angle SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to N type jack cable assembly PE3C3245-100CM is built with PE-P300LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA right angle male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3245-100CM can also be used in the other direction and will be N type female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. Low loss test SMA right angle plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to N female bulkhead low loss test cable 100 cm length using PE-P300LL coax, RoHS. |
| 0 | ||
| PE3M0245-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL-27478, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Temperature Conditioned TNC Male Right Angle to N Female Bulkhead Low Loss Cable 100 cm Length Using PE-P300LL Coax., Pasternack temperature conditioned TNC male right angle to N female bulkhead low loss cable 100 cm length using PE-P300LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0245-100CM is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability TNC to type N cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with right angle TNC connection on one end and N type connection on the other. Our low loss right angle TNC to type N cable assemblies have a male gender on end 1 and female on end 2. This TNC to type N cable is a male to female coax assembly. PE3M0245-100CM can also be known as a temperature conditioned low loss right angle TNC plug to N type jack cable assembly and will be shipped the same day after it is purchased. TNC plug to type N jack cable assembly PE3M0245-100CM is built with PE-P300LL which is a flexible coax. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency TNC right angle male to N type female cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0245-100CM can be used in the other direction and will be type N female to right angle TNC male cable assembly. Pasternack high reliability low loss TNC right angle plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for same-day shipment worldwide. Variations of PE45526 TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned TNC male right angle to N female bulkhead low loss cable 100 cm length using PE-P300LL coax. |
| 0 | ||
| PE3C3045-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Female to Water Blue FAKRA Jack Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly SMA female to water blue FAKRA jack low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to water blue FAKRA jack low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and FAKRA cable connection on the other. Our low loss SMA to FAKRA cable assemblies have a female gender on end 1 and jack on end 2. PE3C3045-100CM can also be known as a low loss SMA jack to FAKRA female cable assembly and will be shipped same-day as it is purchased. SMA jack to FAKRA female cable assembly PE3C3045-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA female to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3045-100CM can also be used in the other direction and will be FAKRA jack to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to water blue FAKRA jack low loss cable 100 cm length using LMR-100 coax. |
| 0 | ||
| PE3C7845-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Male to N Female Bulkhead Low PIM Cable 100 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly N male to N female bulkhead low PIM cable 100 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead low PIM cable 100 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our low PIM N type to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C7845-100CM, can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C7845-100CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM N type male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7845-100CM can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead low PIM cable 100 cm length using 1/4 inch superflexible coax. |
| 0 | ||
![]() TE Connectivity | 2-1445100-6 | TE Connectivity | MICRO MNL HDR ASSY S/ROW LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 6 | PCB Header & Receptacle | Part Number: 2-1445100-6 | Internal Number: 2-1445100-6 | TE Connectivity RoHS : Compliant |
| 12,175 | |
| 2-1445100-4 | TE Connectivity | MICRO MNL HDR ASSY S/ROW LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 4 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 4 | PCB Header & Receptacle | Part Number: 2-1445100-4 | Internal Number: 2-1445100-4 | TE Connectivity RoHS : Compliant |
| 1,580 | ||
| 2-1445100-3 | TE Connectivity | MICRO MNL HDR ASSY S/ROW LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 3 | PCB Header & Receptacle | Part Number: 2-1445100-3 | Internal Number: 2-1445100-3 | TE Connectivity RoHS : Compliant |
| 1,505 | ||
| 201451-000 | TE Connectivity | B-106-1993 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 12 – 10 AWG Wire Size: 3 – 6 mm² Stud Size: 3/8 Stud Diameter: .413 in Closed Ring Tongue Terminal 12 – 10 AWG 3 – 6 mm² 3/8 | Ring Terminal | Part Number: 201451-000 | Internal Number: 201451-000 | Alias Number: 3-1191460-4 | .413" | TE Connectivity RoHS : Compliant |
| 1,208 | ||
| 2-1445100-2 | TE Connectivity | MICRO MNL HDR ASSY S/ROW LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 2 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 2 | PCB Header & Receptacle | Part Number: 2-1445100-2 | Internal Number: 2-1445100-2 | TE Connectivity RoHS : Compliant |
| 525 | ||
| 3-1445100-0 | TE Connectivity | MICRO MNL HDR ASSY S/ROW LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 10 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 10 | PCB Header & Receptacle | Part Number: 3-1445100-0 | Internal Number: 3-1445100-0 | TE Connectivity RoHS : Compliant |
| 150 | ||
| 2-1445100-8 | TE Connectivity | MICRO MNL HDR ASSY S/ROW LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 8 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 8 | PCB Header & Receptacle | Part Number: 2-1445100-8 | Internal Number: 2-1445100-8 | Alias Number: BM0614-000 | TE Connectivity RoHS : Compliant |
| 146 | ||
| VE45100RJS | TE Connectivity | VE 45W 100R 5% Solder Lug Resistance Value: 100 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 100 Ω Wire Wound 5 % Power Resistor | Part Number: VE45100RJS | Internal Number: 2-2176722-1 | TE Connectivity RoHS : Compliant |
| 50 | ||
![]() Teledyne HiRel | 5962-9451002MXA![]() | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 12 MACROCELL, 66 MHZ RoHS : Not Compliant | 0 | ||
5962-9451003MXA![]() | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 12 MACROCELL, 83 MHZ RoHS : Not Compliant | 0 | |||
5962-9451002MZA![]() | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 12 MACROCELL, 66 MHZ RoHS : Not Compliant | 0 | |||
5962-9451003MZA![]() | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 12 MACROCELL, 83 MHZ RoHS : Not Compliant | 0 | |||
5962-9451001MXA![]() | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 12 MACROCELL, 50 MHZ RoHS : Not Compliant | 0 | |||
5962-9451003MYA![]() | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 12 MACROCELL, 83 MHZ RoHS : Not Compliant | 0 | |||
5962-9451001MZA![]() | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 12 MACROCELL, 50 MHZ RoHS : Not Compliant | 0 | |||
5962-9451002MYA![]() | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 12 MACROCELL, 66 MHZ RoHS : Not Compliant | 0 | |||
5962-9451001MYA![]() | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 12 MACROCELL, 50 MHZ RoHS : Not Compliant | 0 | |||
![]() Vyrian | 9451008U1000 | Belden Inc | Wire And Cable, 2 Conductor(s), 22AWG, 300V, Communication Cable RoHS : Compliant | 17,309 | ||
| 834-43-045-10-001000 | Mill-max Mfg | Board Connector, 45 Contact(s), 1 Row(s), Female, Straight, Solder Terminal, Socket | 13,665 | |||
| BUK9K45-100E | Nexperia | Power Field-Effect Transistor RoHS : Compliant | 12,264 | |||
| 831-43-045-10-001000 | Mill-max Mfg | Board Connector, 45 Contact(s), 1 Row(s), Female, Straight, Solder Terminal, Socket | 10,924 | |||
| 5962-01-394-5100 | Texas Instruments | NOR Gate, TTL, CQCC20 RoHS : Not Compliant | 8,763 | |||
BUK9K45-100E,115![]() | Nexperia | Power Field-Effect Transistor, 21A I(D), N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 7,668 | |||
| 2-1445100-4 | TE Connectivity | Combination Line Connector, 4 Contact(s), Male, Surface Mount Terminal, Plug RoHS : Compliant | 7,357 | |||
| FW-04-05-L-D-345-100 | Samtec Inc | Board Stacking Connector, 8 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal RoHS : Compliant | 4,773 | |||
| 0451001.NR | Littelfuse Inc | Electric Fuse, Very Fast Blow, 1A, 125VAC, 125VDC, 50A (IR), Surface Mount, NANO RoHS : Not Compliant | 890 | |||
| 1451-005G-T | Ic Sensors | Piezoresistive Sensor, Gage, 0Psi Min, 5Psi Max, 0.25%, 60mV, Square, Surface Mount | 854 | |||
| 155145-1000 | ITT Interconnect Solutions | MIL Series Connector, 26 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle RoHS : Not Compliant | 843 | |||
| 4510011K | Lapp Group Pvt | Wire And Cable, 1 Conductor(s), 500V, Flexible Cord And Fixture Wire | 809 | |||
| 851-43-045-10-021000 | Mill-max Mfg | Board Connector | 587 | |||
| 0451001.MRSN | Littelfuse Inc | Electric Fuse, Very Fast Blow, 1A, 125VAC, 125VDC, 50A (IR), Surface Mount, NANO RoHS : Compliant | 286 | |||
| 451001 | Littelfuse Inc | 231 | ||||
![]() Win Source Electronics | 0451008.MRL | Littelfuse Inc | Fuse Chip Very Fast Acting 8A 125V SMD Solder Pad 2410 Ceramic T/R CE/CSA/PSE/UL / FUSE BRD MNT 8A 125VAC/VDC 2SMD RoHS : Compliant |
| 60,000 | |
| 0451004.MRL | Littelfuse Inc | FUSE BRD MNT 4A 125VAC/VDC 2SMD RoHS : Compliant |
| 52,000 | ||
| 0451005.MRL | Littelfuse Inc | FUSE BRD MNT 5A 125VAC/VDC 2SMD RoHS : Compliant |
| 36,800 | ||
| 0451001.MRL | Littelfuse Inc | FUSE BRD MNT 1A 125VAC/VDC 2SMD RoHS : Compliant |
| 36,666 | ||
| 0451002.MRL | Littelfuse Inc | FUSE BOARD MNT 2A 125VAC/VDC SMD RoHS : Compliant |
| 30,000 | ||
| 0451003.MRL | Littelfuse Inc | FUSE BRD MNT 3A 125VAC/VDC 2SMD RoHS : Compliant |
| 28,000 | ||
| SRN6045-100M | Bourns Inc | FIXED IND 10UH 2.5A 58.6MOHM SMD RoHS : Compliant |
| 20,416 | ||
| 0451007.MRL | Littelfuse Inc | FUSE BRD MNT 7A 125VAC/VDC 2SMD RoHS : Compliant |
| 20,000 | ||
| 43045-1000 | Molex | MICROFIT 3.0 RA HDR W/TH DR TIN RoHS : Compliant |
| 19,383 | ||
| 451-00001 | Laird Connectivity Inc | RF TXRX MODULE BT TRC ANT SMD / 802.15.4, Bluetooth Bluetooth v5.0, Thread Transceiver Module 2.4GHz Integrated, Trace Surface Mount |
| 8,400 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |