| Electronic Components Datasheet Search |
|
44812 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Onlinecomponents.com | 44812-0002 | Molex | Conn Socket Strip RCP 2 POS 2.54mm Solder ST Thru-Hole KK® Tray RoHS : Compliant |
| 10,306 | |
| 44812-0016 | Molex | Conn Socket Strip RCP 16 POS 2.54mm Solder ST Thru-Hole KKA® Tray RoHS : Compliant |
| 7,144 | ||
| 44812-0005 | Molex | Conn Socket Strip RCP 5 POS 2.54mm Solder ST Thru-Hole KK® Tray RoHS : Compliant |
| 2,294 | ||
| 44812-0014 | Molex | 2.54mm Pitch KK® PC Board Receptacle, Top and Bottom Entry, Low Profile, 5.00µm Tin (Sn), 14 Circuits RoHS : Compliant |
| 648 | ||
| 44812-0015 | Molex | Conn Socket Strip RCP 15 POS 2.54mm Solder ST Thru-Hole KK® Tray RoHS : Compliant |
| 450 | ||
| 44812-0007 | Molex | Conn Socket Strip RCP 7 POS 2.54mm Solder ST Thru-Hole KK® Tray RoHS : Compliant |
| 46 | ||
| 44812-0006 | Molex | 2.54mm Pitch KK® PC Board Receptacle, Top and Bottom Entry, Low Profile, 5.00µm Tin (Sn), 6 Circuits RoHS : Compliant |
| 9 | ||
| ER920-44812 | NAMCO Controls | Infrared Detector-SHORT-120VAC-800C- RoHS : Compliant |
| 0 | ||
![]() Verical | 448120002 | Molex | Conn Socket Strip RCP 2 POS 2.54mm Solder ST Thru-Hole KK Tray RoHS : Compliant |
| 10,306 | |
| 44812-0016 | Molex | Conn Socket Strip RCP 16 POS 2.54mm Solder ST Thru-Hole KK Tray RoHS : Compliant |
| 6,144 | ||
| 448120040 | Molex | Conn Socket Strip RCP 2 POS 2.54mm Solder ST Thru-Hole KK Tray RoHS : Compliant |
| 4,160 | ||
| 44812-0005 | Molex | Conn Socket Strip RCP 5 POS 2.54mm Solder ST Top Entry Thru-Hole KK Tray RoHS : Compliant |
| 2,286 | ||
| 44812-0016 | Molex | Conn Socket Strip RCP 16 POS 2.54mm Solder ST Thru-Hole KK Tray RoHS : Compliant |
| 1,000 | ||
| 44812-0014 | Molex | Conn Socket Strip RCP 14 POS 2.54mm Solder ST Top Entry Thru-Hole KK Tray RoHS : Compliant |
| 648 | ||
| 44812-0015 | Molex | Conn Socket Strip RCP 15 POS 2.54mm Solder ST Thru-Hole KK Tray RoHS : Compliant |
| 450 | ||
![]() Avnet Americas | 505448-1294 | Molex | 1.25WB DL RA ASSY 12CKT BLU G010 - Tape and Reel (Alt: 5054481294) RoHS : Compliant |
| 0 | |
| 505448-1270 | Molex | MLP1.25 DUAL RA SMT SN ETP 12P NAT - Tape and Reel (Alt: 5054481270) RoHS : Compliant |
| 0 | ||
| 5-644812-4 | TE Connectivity | - Bulk (Alt: 5-644812-4) RoHS : Compliant | 0 | |||
| 505448-1274 | Molex | MLP1.25 DUAL RA SMT SN ETP 12P BLU - Tape and Reel (Alt: 5054481274) RoHS : Compliant |
| 0 | ||
| 3-644812-9 | TE Connectivity | - Bulk (Alt: 3-644812-9) RoHS : Compliant | 0 | |||
| 505448-1234 | Molex | 1.25WB DL RA ASSY 12CKT BLU G038 - Tape and Reel (Alt: 5054481234) RoHS : Compliant |
| 0 | ||
| 505448-1290 | Molex | 1.25WB DL RA ASSY 12CKT NAT G010 - Tape and Reel (Alt: 5054481290) RoHS : Compliant |
| 0 | ||
| 3-644812-2 | TE Connectivity | - Bulk (Alt: 3-644812-2) RoHS : Compliant | 0 | |||
| 505448-1250 | Molex | 1.25WB DL RA ASSY 12CKT NAT G076 - Tape and Reel (Alt: 5054481250) RoHS : Compliant |
| 0 | ||
| 505448-1272 | Molex | MLP1.25 DUAL RA SMT SN ETP 12P RED - Tape and Reel (Alt: 5054481272) RoHS : Compliant |
| 0 | ||
| 3-644812-6 | TE Connectivity | - Bulk (Alt: 3-644812-6) RoHS : Compliant | 0 | |||
| 3-644812-4 | TE Connectivity | - Bulk (Alt: 3-644812-4) RoHS : Compliant | 0 | |||
| 505448-1251 | Molex | Pin Header, 12 Contacts, 2 Rows, 1.25mm, Gold, 1.5A, Right Angle, Shrouded, Brass, Wire-to-Board - Tape and Reel (Alt: 5054481251) RoHS : Compliant |
| 0 | ||
| 505448-1292 | Molex | 1.25WB DL RA ASSY 12CKT RED G010 - Tape and Reel (Alt: 5054481292) RoHS : Compliant |
| 0 | ||
| FW-13-04-G-D-448-120 | Samtec Inc | Board Stackers & Spacers, Pin Header, 11.38 mm, 26 Contacts, Solder, 2 Rows, 1.27 mm, FW Series - Rail/Tube (Alt: FW-13-04-G-D-448-120) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | 1-104481-0 | TE Connectivity | Headers & Wire Housings SPOINT SKT 32-28 Reel of 15000 RoHS : Compliant |
| 135,000 | |
| 5-104481-2 | TE Connectivity | Headers & Wire Housings SHORT POINT RoHS : Compliant |
| 36,459 | ||
| 1-104481-2 | TE Connectivity | Headers & Wire Housings CONTACT GLD 32-28AWG RoHS : Compliant |
| 22,891 | ||
| 35448129 | Aptiv PLC | Automotive Connectors LOCK TPA/CLIP ORN RoHS : Compliant |
| 2,327 | ||
| 505448-1291 | Molex | Headers & Wire Housings 1.25WB DL RA 12CKT BK G010 RoHS : Compliant |
| 1,890 | ||
| 4812 | Keystone Electronics Corp | Standoffs & Spacers 1.75 NYL stdoff 4-40 Thread RoHS : Compliant |
| 1,550 | ||
| 505448-1271 | Molex | Headers & Wire Housings MicroLockPlus RA HDR DR 12CKT TIN-BIS BL RoHS : Compliant |
| 1,443 | ||
| 3-644812-3 | TE Connectivity | Headers & Wire Housings 03P MTA156 PSTD CONN 18AWG LF RoHS : Compliant |
| 11 | ||
| TMR 4-4812 | Traco Power | DC/DC Converters - Through Hole 36-75Vin 12V 333mA 4W Iso Reg SIP RoHS : Compliant |
| 8 | ||
| 4448-124L | API Delevan | Coupled Inductors 50uH 15% .111ohm Hi Currnt Molded SMT RoHS : Not Compliant |
| 5 | ||
| DV6448/12 | ebm-papst | DC Fans Tubeaxial, 172x160x51mm, 48V, 311.9CFM, 40W, 65dB, 4300RPM, Ball, Speed Signal RoHS : Compliant |
| 0 | ||
| TMR 4-4812WI | Traco Power | DC/DC Converters - Through Hole 18-75Vin 12V 333mA 4W Iso Reg SIP RoHS : Compliant |
| 0 | ||
| PE3C0448-12 | Pasternack Enterprises | RF Cable Assemblies Reverse Polarity TNC Plug to Reverse Polarity TNC Plug Low Loss Cable 12 Inch Length Using LMR-240 Coax |
| 0 | ||
| PE34448-12 | Pasternack Enterprises | RF Cable Assemblies SMA Male to SMB Plug Cable 12 Inch Length Using RG196 Coax |
| 0 | ||
| PE39448-12 | Pasternack Enterprises | RF Cable Assemblies SMA Male Right Angle to N Female Bulkhead Semi-Flexible Precision Cable 12 Inch Length Using PE-SR405FL Coax, LF Solder, RoHS |
| 0 | ||
![]() Newark | 1-104481-2 | TE Connectivity | Contact, Socket, 28Awg, Crimp; |Te Connectivity Amp 1-104481-2 RoHS : Compliant |
| 9,110 | |
| 505448-1271 | Molex | Conn, R/A Hdr, 12Pos, 2Row, 1.25Mm, Smt; |Molex 505448-1271 RoHS : Compliant |
| 1,726 | ||
| 505448-1271 | Molex | Conn, R/A Hdr, 12Pos, 2Row, 1.25Mm, Smt; |Molex 505448-1271 RoHS : Compliant |
| 1,500 | ||
| 1-104481-2 | TE Connectivity | Contact, Receptacle, 32-28Awg, Crimp; Product Range:Ampmodu Short Point Series; Contact Gender:Socket; Contact Termination Type:Crimp; Wire Size Awg Max:28Awg; Contact Plating:Gold Plated Contacts; Wire Size Awg Min:32Awg Rohs Compliant: Yes RoHS : Compliant |
| 573 | ||
| 0448.125MR | Littelfuse Inc | Fuse Smd, 125Ma, Very Fast Acting, 125V; |Littelfuse 0448.125MR RoHS : Compliant |
| 535 | ||
| 0448.125MR | Littelfuse Inc | Fuse Smd, 125Ma, Very Fast Acting, 125V; |Littelfuse 0448.125MR RoHS : Compliant |
| 535 | ||
| 0448.125MR | Littelfuse Inc | Fuse, V Fast Acting, Smd, 125Ma; |Littelfuse 0448.125MR RoHS : Compliant |
| 387 | ||
| 0448.125MR | Littelfuse Inc | Fuse, V Fast Acting, Smd, 125Ma; |Littelfuse 0448.125MR RoHS : Compliant |
| 387 | ||
| 505448-1291 | Molex | Pin Header, 505448-1291; |Molex 505448-1291 RoHS : Compliant |
| 217 | ||
| THT-194-481-2.5-SC | Brady Worldwide Inc | Bpt-194-481/ Roll; |Brady THT-194-481-2.5-SC RoHS : Not Compliant |
| 142 | ||
| 505448-1291 | Molex | Wtb Connector, R/A Hdr, 12Pos, 2Row, Smt; Connector Systems:Signal, Wire To Board; Pitch Spacing:1.25Mm; No. Of Rows:2Rows; No. Of Contacts:12Contacts; Contact Termination Type:Surface Mount; Connector Shroud:Shrouded Rohs Compliant: Yes RoHS : Compliant |
| 20 | ||
| TS24/4-8-12 | ABB Low Voltage Products and Systems | Bell Transformer, 4V/8V/12V, 6A, 24Va; |Abb TS24/4-8-12 RoHS : Compliant |
| 12 | ||
| TMR 4-4812WI | Traco Power | Dc-Dc Converter, 12V, 0.333A; Power Supply Applications:Ite; Dc/Dc Converter Type:Sip; Input Ratio:4:1; Output Power Max:4W; No. Of Outputs:1 Output; Output Voltage - Output 1:12V; Output Current - Output 1:333Ma; Width:9.3Mm Rohs Compliant: Yes RoHS : Compliant |
| 5 | ||
| 895-032-544-812 | EDAC Inc | Conn, Edac 895-032-544-812; |Edac 895-032-544-812 RoHS : Not Compliant |
| 0 | ||
| 895-074-544-812 | EDAC Inc | Conn, Edac 895-074-544-812; |Edac 895-074-544-812 RoHS : Not Compliant |
| 0 | ||
![]() RS | 1244812 | RS Pro | GALVANIZED STEEL BOW SHACKLE 1000LBS WORKING LOAD 0.51IN JAW WIDTH |
| 5 | |
| 2454481 (25532914) (BHSFIA0250075-100RS) | RS Pro | SCREW, 1/4-28 X 3/4 BUTTON SOCKET CAP, PLAIN FINISH |
| 5 | ||
| 24-4812 | Eaton Cutler-Hammer | CONTACT LEVER ASSEMBLY |
| 0 | ||
| 44812-0005 | Molex | KK 254 SERIES 2.54MM 5 WAY 1 ROW STRAIGHT PCB SOCKET THROUGH HOLE SOCKET STRIP RoHS : Compliant |
| 0 | ||
| 5-104481-2 | TE Connectivity | CONNECTOR, AMPMODU, SHORT POINT CONT PLTD SN RoHS : Compliant |
| 0 | ||
| 0448.125MR | Littelfuse Inc | FUSE 125V V/FA NANO2 Lead-Free .125A RoHS : Compliant |
| 0 | ||
| 505448-1294 | Molex | 1.25WB DL RA ASSY 12CKT BLU G010 |
| 0 | ||
| 505448-1270 | Molex | MLP1.25 DUAL RA SMT SN ETP 12P NAT |
| 0 | ||
| 505448-1274 | Molex | MLP1.25 DUAL RA SMT SN ETP 12P BLU |
| 0 | ||
| 10132448121PLF | Amphenol FCi | 10132448-121PLF-MINITEK PWR3.0 HCC P TER |
| 0 | ||
| M-2448.125-DPKEE1.87 | Bimba Manufacturing Company | CYLINDER, O.L., WITH MAGNET ; 1-3/4IN BORE; STROKE: 48.125IN; DBL ACT/PIVOT MT, |
| 0 | ||
| 44812-0003 (448120003) | Molex | KK 254 SERIES 2.54MM 3 WAY 1 ROW STRAIGHT PCB SOCKET THROUGH HOLE SOCKET STRIP |
| 0 | ||
| 44812-0002 (448120002) | Molex | KK 254 SERIES 2.54MM 2 WAY 1 ROW STRAIGHT PCB SOCKET THROUGH HOLE SOCKET STRIP |
| 0 | ||
| 44812-0007 (448120007) | Molex | KK 254 SERIES 2.54MM 7 WAY 1 ROW STRAIGHT PCB SOCKET THROUGH HOLE SOCKET STRIP |
| 0 | ||
| 4448-12WT (78205116210) | B-Line by Eaton | NEMA 12 48.00 WIRING TROUGH |
| 0 | ||
![]() Sager | 0448120027 | Molex | Headers & Wire Housings KK 100 PCB CONN ASSY LO PRO 9 CKT 15 AU | 0 | ||
| 5054481290 | Molex | 1.25WB DL RA ASSY 12CKT NAT G010 RoHS : Compliant |
| 0 | ||
| 5-104481-2 | TE Connectivity | Headers & Wire Housings SHORT POINT RoHS : Compliant |
| 0 | ||
| 0448.125MR | Littelfuse Inc | FUSE 125V V/FA NANO2 LEAD-FREE .125A RoHS : Compliant | 0 | |||
| 0448120031 | Molex | Headers & Wire Housings KK 100 PCB CONN ASSY LO PRO 13 CKT 15 AU | 0 | |||
| TW-17-07-L-D-448-120 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
| 5-644812-4 | TE Connectivity | Headers & Wire Housings 24P MTA156 PSTD CONN 18AWG LF RoHS : Compliant | 0 | |||
| 0448120053 | Molex | Headers & Wire Housings KK 100 PCB CONN ASSY LO PRO 15 CKT 30 AU | 0 | |||
| LMLC1-1RLS4-28448-12 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| T11-0-20.0A-34481-2-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 5054481251 | Molex | Headers & Wire Housings 1.25WB DL RA ASSY 12CKT BK G076 RoHS : Compliant |
| 0 | ||
| 3-644812-9 | TE Connectivity | Headers & Wire Housings 09P MTA156 PSTD CONN 18AWG LF RoHS : Compliant | 0 | |||
| CA1-X0-09-448-121-D | Carling Technologies | Circuit Breakers | 0 | |||
| 3-644812-3 | TE Connectivity | Headers & Wire Housings 03P MTA156 PSTD CONN 18AWG LF RoHS : Compliant |
| 0 | ||
| 3-644812-2 | TE Connectivity | Headers & Wire Housings 02P MTA156 PSTD CONN 18AWG LF RoHS : Compliant | 0 | |||
![]() TME | 44812-0040 | Molex | Connector: wire-board; female; data; 500V; PIN: 2; 2.54mm; tinned RoHS : Compliant |
| 4,160 | |
| 44812 | ProLinear/PONTECH Inc | Flap grinding wheels; Ø: 125mm; Granularity: 60; 22.2mm |
| 165 | ||
| 03448125 | GSR | Drill bit; for metal; Ø: 12.5mm; high speed steel grounded HSS-G |
| 0 | ||
| 150HB4_4812S1.5 | GAPTEC Electronic GmbH & Co. KG | Converter: DC/DC; 150W; Uin: 18÷72VDC; Uout: 12VDC; Iout: 12.5A; THT |
| 0 | ||
| 3DAW4_4812S1.5 | GAPTEC Electronic GmbH & Co. KG | Converter: DC/DC; 3W; Uin: 18÷75VDC; Uout: 12VDC; Iout: 250mA; DIP |
| 0 | ||
| 3S8EW4_4812S1.5RP | GAPTEC Electronic GmbH & Co. KG | Converter: DC/DC; 3W; Uin: 18÷75VDC; Uout: 12VDC; Iout: 250mA; SIP8 |
| 0 | ||
| 56.44.8.120.0000 | FINDER SpA | Relay: electromagnetic; 4PDT; Icontacts max: 12A; monostable; PCB RoHS : Compliant |
| 0 | ||
| 6DAW4_4812S1.5 | GAPTEC Electronic GmbH & Co. KG | Converter: DC/DC; 6W; Uin: 18÷75VDC; Uout: 12VDC; Iout: 500mA; DIP24 |
| 0 | ||
| 3DAW4_4812S4 | GAPTEC Electronic GmbH & Co. KG | Converter: DC/DC; 3W; Uin: 18÷75VDC; Uout: 12VDC; Iout: 250mA; DIP24 |
| 0 | ||
| 3S8W4_4812S4RP | GAPTEC Electronic GmbH & Co. KG | Converter: DC/DC; 3W; Uin: 18÷75VDC; Uout: 12VDC; Iout: 250mA; SIP8 |
| 0 | ||
| 3D8W4_4812D1.6RP | GAPTEC Electronic GmbH & Co. KG | Converter: DC/DC; 3W; Uin: 18÷75VDC; Uout: 12VDC; Uout2: -12VDC; DIP8 |
| 0 | ||
| 10DAW4_4812S1.5 | GAPTEC Electronic GmbH & Co. KG | Converter: DC/DC; 10W; Uin: 18÷72VDC; Uout: 12VDC; Iout: 833mA; THT |
| 0 | ||
| 3DAW4_4812S6 | GAPTEC Electronic GmbH & Co. KG | Converter: DC/DC; 3W; Uin: 18÷75VDC; Uout: 12VDC; Iout: 250mA; DIP24 |
| 0 | ||
| 03448120 | GSR | Drill bit; for metal; Ø: 12mm; high speed steel grounded HSS-G |
| 0 | ||
| 10DPW4_4812D1.5 | GAPTEC Electronic GmbH & Co. KG | Converter: DC/DC; 10W; Uin: 18÷75VDC; Uout: 12VDC; Uout2: -12VDC |
| 0 | ||
![]() ComSIT USA | 0448125MR | Littelfuse Inc | SURFACE MOUNT FUSE Electric Fuse, Very Fast Blow, 1.25A, 125VAC, 125VDC, 50A (IR), Surface Mount, NANO RoHS : Compliant | 1,000 | ||
![]() Interstate Connecting Components | 505448-1271 | Molex | EMBOSSED PKG FOR 505448 12P B ACK |
| 1,500 | |
| 5-104481-2 | TE Connectivity | SHORT POINT CONT PLTD SN RoHS : Compliant |
| 285 | ||
| 505448-1291 | Molex | 1.25MM 12P SM HDR,2 ROW RA 0.10um AU,T&R,BLK |
| 125 | ||
| 44812-0023 | Molex | KK 100 PCB CONN ASSY LO P CKT 15 AU RoHS : Compliant |
| 23 | ||
| 3-644812-3 | TE Connectivity | 03P MTA156 PSTD CONN 18AWG LF RoHS : Compliant |
| 16 | ||
| 5-104481-2 | TE Connectivity | SHORT POINT CONT PLTD SN RoHS : Compliant |
| 0 | ||
| 10-497448-125 | Amphenol Aerospace | 0 | ||||
| 10-597448-125 | Amphenol Industrial Operations | 0 | ||||
| 10-244812-03S | Amphenol Industrial Operations | PLUG | 0 | |||
| 10-244812-03P | Amphenol Industrial Operations | PLUG | 0 | |||
| 104481-2 | TE Connectivity | SHORT POINT CONT PLTD SN-PB RoHS : Not Compliant |
| 0 | ||
| 1-104481-2 | TE Connectivity | SHORT POINT RECP CONT LP RoHS : Compliant |
| 0 | ||
| 053514-4812 | ITT Interconnect Solutions | DCMV-37S-N-F225 | 0 | |||
![]() PEI Genesis | S694-48-125R | SOURIAU-SUNBANK |
| 0 | ||
![]() Chip 1 Exchange | 44812-0002 | Molex | INSTOCK RoHS : Compliant | 18,838 | ||
| 505448-1271 | Molex | INSTOCK | 18,200 | |||
| 44812-0016 | Molex | INSTOCK RoHS : Compliant | 9,287 | |||
| 44812-0005 | Molex | INSTOCK RoHS : Compliant | 5,447 | |||
![]() Avnet Abacus | 448120030 | Molex | (Alt: 448120030) RoHS : Compliant | 0 | ||
| 448120024 | Molex | (Alt: 448120024) RoHS : Compliant | 0 | |||
| 448120009 | Molex | Conn Socket Strip RCP 9 POS 254mm Solder ST ThruHole Tube (Alt: 448120009) RoHS : Compliant | 0 | |||
| 448120009 | Molex | Conn Socket Strip RCP 9 POS 254mm Solder ST ThruHole Tube (Alt: 448120009) RoHS : Compliant | 0 | |||
| 448120013 | Molex | Conn Socket Strip RCP 13 POS 254mm Solder ST ThruHole Tube (Alt: 448120013) RoHS : Compliant | 0 | |||
| 448120025 | Molex | Conn Socket Strip RCP 7 POS 254mm Solder ST ThruHole Tray (Alt: 448120025) RoHS : Compliant | 0 | |||
| 448120015 | Molex | Conn Socket Strip RCP 15 POS 254mm Solder ST ThruHole Tube (Alt: 448120015) RoHS : Compliant | 0 | |||
| 448120015 | Molex | Conn Socket Strip RCP 15 POS 254mm Solder ST ThruHole Tube (Alt: 448120015) RoHS : Compliant | 0 | |||
| 448120002 | Molex | (Alt: 448120002) RoHS : Compliant | 0 | |||
| 448120002 | Molex | (Alt: 448120002) RoHS : Compliant | 0 | |||
| 448120003 | Molex | Conn Socket Strip RCP 3 POS 254mm Solder ST ThruHole Tube (Alt: 448120003) RoHS : Compliant | 0 | |||
| 448120003 | Molex | Conn Socket Strip RCP 3 POS 254mm Solder ST ThruHole Tube (Alt: 448120003) RoHS : Compliant | 0 | |||
| 5-104481-2 | TE Connectivity | Contact SKT Crimp ST Cable Mount Strip (Alt: 5-104481-2) RoHS : Compliant | 0 | |||
| 5-104481-2 | TE Connectivity | Contact SKT Crimp ST Cable Mount Strip (Alt: 5-104481-2) RoHS : Compliant | 0 | |||
| BFC237448123 | Vishay Intertechnologies | VISBFC237448123 (Alt: BFC237448123) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 5054481291 | Molex | (Alt: 5054481291) RoHS : Compliant | 0 | ||
![]() Master Electronics | 5-104481-2 | TE Connectivity | SHORT POINT CONT PLTD SN RoHS : Compliant |
| 30,000 | |
| 44812-0005 | Molex | Conn Socket Strip RCP 5 POS 2.54mm Solder ST Thru-Hole KK® Tray RoHS : Compliant |
| 2,294 | ||
| 71-144812-10P | Amphenol Industrial Operations | Plug |Amphenol Industrial 71-144812-10P RoHS : Compliant |
| 25 | ||
| TW-17-07-L-D-448-120 | Samtec Inc | Flexible Surface Mount Board Stacking Header RoHS : Compliant |
| 0 | ||
| 44812-0014 | Molex | 2.54mm Pitch KK® PC Board Receptacle Top and Bottom Entry Low Profile 5.00µm Tin (Sn) 14 Circuits RoHS : Compliant |
| 0 | ||
| 3-644812-3 | TE Connectivity | 03P MTA156 PSTD CONN 18AWG LF MOQ Reduction RoHS : Compliant |
| 0 | ||
| 144-8129-600 | ITT Interconnect Solutions | Connector |Itt Cannon 144-8129-600 RoHS : Compliant |
| 0 | ||
| 44812-0007 | Molex | Conn Socket Strip RCP 7 POS 2.54mm Solder ST Thru-Hole KK® Tray RoHS : Compliant |
| 0 | ||
| XC5E-4481-2 | Aratas Corporation | DIN Connector RoHS : Compliant |
| 0 | ||
| FW-08-05-G-D-448-121 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-13-04-G-D-448-120 | Samtec Inc | FLEXIBLE MICRO BOARD STAC RoHS : Compliant |
| 0 | ||
| 6448/12HAU-211 | ebm-papst | Dc Fans Dc Tubeaxial Fan Speed Signal Ttl Compatible RoHS : Compliant |
| 0 | ||
| DV6448/12 | ebm-papst | DC Fan Axial Ball Bearing 48V 28V to 60V 311.9CFM 65dB RoHS : Compliant |
| 0 | ||
| 2844481-2 | TE Connectivity | SDE COMMERCIAL DIE 2D RoHS : Not Compliant |
| 0 | ||
| XC5E-4481-2A | Aratas Corporation | DIN Connector RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C0448-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity TNC Plug to Reverse Polarity TNC Plug Low Loss Cable 12 Inch Length Using LMR-240 Coax., Radio frequency assembly reverse polarity TNC plug to reverse polarity TNC plug low loss cable 12 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity TNC plug to reverse polarity TNC plug low loss cable 12 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity TNC cable connection on one end and reverse polarity TNC cable connection on the other. Our low loss reverse polarity TNC to reverse polarity TNC cable assemblies have a plug gender on end 1 and plug on end 2. PE3C0448-12 can also be known as a low loss reverse polarity TNC male to reverse polarity TNC male cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC male to reverse polarity TNC male cable assembly PE3C0448-12 is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency reverse polarity TNC plug to reverse polarity TNC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC reverse polarity male to TNC reverse polarity male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC plug to reverse polarity TNC plug low loss cable 12 inch length using LMR-240 coax. |
| 785 | |
| PE3C4448-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female Bulkhead to SSMC Plug Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA female bulkhead to SSMC plug cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SSMC plug cable 12 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SSMC cable connection on the other. Our SMA to SSMC cable assemblies have a female gender on end 1 and plug on end 2. This SMA to SSMC cable is a female to plug coax assembly, PE3C4448-12, can also be known as a SMA jack to SSMC male cable assembly and will be shipped same-day as it is purchased. SMA jack to SSMC male cable assembly PE3C4448-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA female bulkhead to SSMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4448-12 can also be used in the other direction and will be SSMC plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SSMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SSMC plug cable 12 inch length using PE-SR405FLJ coax. |
| 431 | ||
| PE34481-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMB Plug to SMB Plug Right Angle Cable 24 Inch Length Using RG400 Coax., Radio frequency assembly SMB plug to SMB plug right angle cable 24 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to SMB plug right angle cable 24 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and right angle SMB cable connection on the other. Our SMB to right angle SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE34481-24, can also be known as a SMB male to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE34481-24 is built with RG400 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to right angle SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMB plug to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34481-24 can also be used in the other direction and will be right angle SMB plug to SMB plug cable assembly if the opposite connectivity is required. SMB male to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMB plug right angle cable 24 inch length using RG400 coax. |
| 344 | ||
| PE44812 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: TNC, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 18 GHz, Interface Type 1: PE-P142LL. TNC Male Right Angle Precision Connector Clamp/Solder Attachment for PE-P142LL. PE44812 TNC male right angle coaxial connector has an interface type of PE-P142LL and a 50 Ohm impedance. Pasternack TNC male connector uses shield/contact clamp/solder as an attachment method. Our male TNC right angle coaxial connector provides a minimum frequency of DC and a maximum frequency of 18 GHz. The Pasternack right angle TNC male coaxial connector has a PTFE dielectric type and a VSWR of 1.16. The Pasternack TNC coaxial connector has a passivated stainless steel body. Our PE44812 TNCright angle connector uses beryllium copper contact. This TNC male right angle coaxial RF connector is RoHS and REACH compliant. This Pasternack right angle male TNC connector will ship the same day as purchased. Our TNC right angle male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom TNC connector cable assemblies that will ship the same day as well. |
| 125 | ||
| PE3W07448-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Right Angle Cable 12 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMA male to SMA male right angle cable 12 inch length using PE-SR405FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male right angle cable 12 inch length using PE-SR405FL coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W07448-12 can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W07448-12 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance. RF specs on this 12.4 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07448-12 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 12 inch length using PE-SR405FL coax. |
| 115 | ||
| PE34448-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMB Plug Cable 12 Inch Length Using RG196 Coax., Radio frequency assembly SMA male to SMB plug cable 12 inch length using RG196 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMB plug cable 12 inch length using RG196 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB cable connection on the other. Our SMA to SMB cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMB cable is a male to plug coax assembly, PE34448-12, can also be known as a SMA plug to SMB male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB male cable assembly PE34448-12 is built with RG196 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA male to SMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34448-12 can also be used in the other direction and will be SMB plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB plug cable 12 inch length using RG196 coax. |
| 81 | ||
| PE3MSA00448-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: JACK, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Lead Free 3-Lug TRB Non-Insulated Bulkhead Jack to Jack for 78 Ohm M17/176-00002, 12" Cable., Radio frequency assembly lead free 3-Lug TRB non-insulated bulkhead jack to jack for 78 Ohm M17/176-00002, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 3-Lug TRB non-insulated bulkhead jack to jack for 78 Ohm M17/176-00002, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MSA00448-12 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MSA00448-12 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack bulkhead to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female bulkhead to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 3-Lug TRB non-insulated bulkhead jack to jack for 78 Ohm M17/176-00002, 12" cable. |
| 21 | ||
| PE33448-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG6A/U, RF Cable Type: RG6, RF Cable Impedance: 75 Ohm, Length: 12 inches. 75 Ohm BNC Female to 75 Ohm BNC Female Cable 12 Inch Length Using 75 Ohm RG6 Coax., Radio frequency assembly 75 Ohm BNC female to 75 Ohm BNC female cable 12 inch length using 75 Ohm RG6 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC female to 75 Ohm BNC female cable 12 inch length using 75 Ohm RG6 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a female gender on end 1 and female on end 2. This BNC to BNC cable is a female to female coax assembly, PE33448-12, can also be known as a BNC jack to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC jack cable assembly PE33448-12 is built with RG6 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is double shielded. RF specs on this BNC female to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC jack to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC female to 75 Ohm BNC female cable 12 inch length using 75 Ohm RG6 coax. |
| 20 | ||
| PE3C10448-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Female Bulkhead to 1.85mm Male Cable 12 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 1.85mm male cable 12 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 1.85mm male cable 12 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a 1.85mm cable connection on the other. Our 2.92mm to 1.85mm cable assembly has a female gender on end 1 and a male on end 2. PE3C10448-12 can also be known as a 2.92mm jack to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. 2.92mm jack to 1.85mm plug cable assembly PE3C10448-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method, while the other has the clamp/solder attachment method and a stainless steel body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10448-12 can also be used in the other direction and will be a 1.85mm male to 2.92mm female bulkhead cable assembly if the opposite connectivity is required. 2.92mm jack bulkhead to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 1.85mm RF cable assembly as per your requirements. |
| 0 | ||
| PE38448-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 12 inches. QN Male to QN Male Cable 12 Inch Length Using RG58 Coax., Radio frequency assembly QN male to QN male cable 12 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to QN male cable 12 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to QN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and QN cable connection on the other. Our QN to QN cable assemblies have a male gender on end 1 and male on end 2. This QN to QN cable is a male to male coax assembly, PE38448-12, can also be known as a QN plug to QN plug cable assembly and will be shipped same-day as it is purchased. QN plug to QN plug cable assembly PE38448-12 is built with RG58 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to QN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5 GHz maximum frequency QN male to QN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. QN plug to QN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to QN cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to QN male cable 12 inch length using RG58 coax. |
| 0 | ||
| PE3W15448-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Female Bulkhead to 4.3-10 Male Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax with Times Microwave Components., Radio frequency assembly 4.3-10 female bulkhead to 4.3-10 male low PIM cable 12 inch length using TFT-5G-402 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 female bulkhead to 4.3-10 male low PIM cable 12 inch length using TFT-5G-402 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 bulkhead cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM 4.3-10 to 4.3-10 cable assembly has a female gender on end 1 and a male on end 2. PE3W15448-12 can also be known as a low PIM 4.3-10 jack to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3W15448-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our bulkhead 4.3-10 female to 4.3-10 male cable has a maximum VSWR of 1.4:1. 4.3-10 jack to 4.3-10 plug cable assembly PE3W15448-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W15448-12 can also be used in the other direction and will be a 4.3-10 male to 4.3-10 female bulkhead cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack bulkhead to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C4481-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 24 inches. SSMC Plug to SSMC Plug Right Angle Cable 24 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SSMC plug to SSMC plug right angle cable 24 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMC plug to SSMC plug right angle cable 24 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMC cable connection on one end and right angle SSMC cable connection on the other. Our SSMC to right angle SSMC cable assemblies have a plug gender on end 1 and plug on end 2. This SSMC to SSMC cable is a plug to plug coax assembly, PE3C4481-24, can also be known as a SSMC male to right angle SSMC male cable assembly and will be shipped same-day as it is purchased. SSMC male to SSMC male cable assembly PE3C4481-24 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SSMC cable assembly is manufactured with SSMC to right angle SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SSMC plug to SSMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4481-24 can also be used in the other direction and will be right angle SSMC plug to SSMC plug cable assembly if the opposite connectivity is required. SSMC male to SSMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to SSMC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to SSMC plug right angle cable 24 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3448-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to N Male Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly SMA male to N male cable 12 inch length using PE-SR402FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3448-12, can also be known as a SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3448-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMA male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3448-12 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 12 inch length using PE-SR402FL coax. |
| 0 | ||
| PE38448-120 | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 120 inches. QN Male to QN Male Cable 120 Inch Length Using RG58 Coax., Radio frequency assembly QN male to QN male cable 120 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to QN male cable 120 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to QN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and QN cable connection on the other. Our QN to QN cable assemblies have a male gender on end 1 and male on end 2. This QN to QN cable is a male to male coax assembly, PE38448-120, can also be known as a QN plug to QN plug cable assembly and will be shipped same-day as it is purchased. QN plug to QN plug cable assembly PE38448-120 is built with RG58 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to QN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5 GHz maximum frequency QN male to QN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. QN plug to QN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to QN cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to QN male cable 120 inch length using RG58 coax. |
| 0 | ||
| PE3C3448-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male Right Angle to BNC Male Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly SMA male right angle to BNC male cable 12 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to BNC male cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and BNC cable connection on the other. Our right angle SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3C3448-12, can also be known as a right angle SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C3448-12 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3448-12 can also be used in the other direction and will be BNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to BNC male cable 12 inch length using RG174 coax. |
| 0 | ||
![]() Vyrian | 44812-0005 | Molex | Board Connector, 5 Contact(s), 1 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Plug RoHS : Compliant | 11,388 | ||
| 44812-0010 | Molex | Board Connector, 10 Contact(s), 1 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Plug RoHS : Compliant | 11,026 | |||
| 44812-0002 | Molex | Board Connector, 2 Contact(s), 1 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Plug RoHS : Compliant | 9,845 | |||
| 44812-0016 | Molex | Board Connector, 16 Contact(s), 1 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Plug RoHS : Compliant | 8,029 | |||
| 44812-0006 | Molex | Board Connector, 6 Contact(s), 1 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Plug RoHS : Compliant | 7,789 | |||
| 44812-0011 | Molex | Board Connector, 11 Contact(s), 1 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Plug RoHS : Compliant | 6,852 | |||
| LM3448-120VFLBK-NOPB | Texas Instruments | 5,007 | ||||
| 44812-0003 | Molex | Board Connector, 3 Contact(s), 1 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Plug RoHS : Compliant | 4,422 | |||
| 44812-0028 | Molex | Board Connector, 10 Contact(s), 1 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Plug RoHS : Compliant | 4,103 | |||
| CT144812 | Micron Technology, Inc | 3,124 | ||||
| 44812-0025 | Molex | Board Connector, 7 Contact(s), 1 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Plug RoHS : Compliant | 628 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |