40L-R4F0018 Price, Distributor, Stock

Lens for LED high power; angle: 20 degrees ; Number of LEDs: 1; Dimensions: round 19.40mm; Height: 14.90mm; material: PMMA; Fastening: fixing-ring; frame

100 : $0.39
50 : $0.44
10 : $0.463
1 : $0.488

371

LL03LU-DO40L (XPE) ROHS

LedLink Optics

Lens for LED high power; angle: 36 degrees ; Number of LEDs: 3; Dimensions: round 35mm; Height: 10.7mm; material: PMMA; Fastening: glue; frame

84 : $1.234
42 : $1.434
10 : $1.512
1 : $1.601

350

LL01CR-DF40L06-M2 (XPE) ROHS

LedLink Optics

Lens for LED high power; angle: 27 degrees ; Number of LEDs: 1; Dimensions: round 13.5mm; Height: 6.65mm; material: PMMA; Fastening: frame

270 : $0.771
90 : $0.837
10 : $0.938
1 : $0.991

227

LL01ED-AQ40L (MX6) ROHS

LedLink Optics

Lens for LED high power; angle: 40 degrees ; Number of LEDs: 1; Dimensions: round 22.5mm; Height: 10.44mm; material: PMMA; PC; Fastening: glue

72 : $0.369
10 : $0.44
1 : $0.463

LL01ED-CC40L06, ROHS

LedLink Optics

Lens for LED high power; angle: 40 degrees ; Number of LEDs: 1; Dimensions: round 22.1mm; Height: 10.5mm; material: PMMA; PC; Fastening: glue

10 : $1.032
1 : $1.087

LL18ED-BI40L (MX6) ROHS

LedLink Optics

Lens for LED high power; angle: 40 degrees ; Number of LEDs: 18; Dimensions: round 110mm; Height: 14.9mm; material: PMMA; PC; Fastening: glue

4 : $4.974
1 : $5.235

LL01ZZ-EX40L (MX6) ROHS

LedLink Optics

Lens for LED high power; angle: 40 degrees ; Number of LEDs: 1; Dimensions: round 21mm; Height: 9.6mm; material: PMMA; PC; Fastening: glue

100 : $0.384
50 : $0.43
10 : $0.458
1 : $0.48

Pasternack Enterprises US

PE3W00140LF/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to BNC Male Cable 36 Inch Length Using RG142 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to BNC male cable 36 inch length using RG142 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to BNC male cable 36 inch length using RG142 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a BNC cable connection on the other. Our type N to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W00140LF/HS-36 can also be known as a type N plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W00140LF/HS-36 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our type N male to BNC male cable has a maximum VSWR of 1.4:1. Type N plug to BNC plug cable assembly PE3W00140LF/HS-36 is built with RG142 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W00140LF/HS-36 can also be used in the other direction and will be a BNC male to type N male cable assembly if the opposite connectivity is required. Type N plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of type N and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to BNC RF cable assembly as per your requirements.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

2,710

PE34440LF

Pasternack Enterprises

Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: C, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50. C Male to C Male Cable Using RG141 Coax, RoHS. PE34440LF is a type C male to type C male cable using RG141 coax. This Pasternack C type male to C type male cable assembly uses a 50 Ohm type C for connector 1 and a 50 Ohm type C for connector 2. Our male type C to male type C cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34440LF C type male to C type male cable assembly is constructed with RG141 coax and the maximum VSWR is 1.4:1.

2,136

LMR-240-LLPX

Pasternack Enterprises

Key Specifications, Generic Name: LMR-240-LLPX, Flex Type: Flexible, Impedance: 50 Ohm, Dielectric Type: PTFE, Velocity of Propagation: 76 %, Jacket Diameter: 0.214 in, Jacket Material: Fluoropolymer, RF Shielding: 90 dB, Frequency, Max: 8 GHz, Max Operating Temperature: 125 deg C, Minimum Bend Radius, One Time: 0.75 in, Minimum Bend Radius, Repeated: 2.5 in, Coax Type: Coax. Low Loss Flexible LMR-240-LLPX Rated Coax Cable with Fluoropolymer Jacket. The LMR-240-LLPX part number from Pasternack is a low-loss coax cable that is flexible. Pasternack flexible coax RF cable has an impedance of 50 Ohm and a PTFE dielectric. Our LMR-240-LLPX coax cable is constructed with a 0.214-inch jacket made of fluoropolymer. This low-loss coax cable has a nominal capacitance of 26.7 pF/Ft. This LMR-240-LLPX flexible RF cable has a minimum RF shielding of 90 dB. Our coax cable from Pasternack has a maximum frequency of 8 GHz. Additional specifications for this LMR-240-LLPX RF coaxial cable are on our downloadable PDF datasheet above. This low-loss RF cable has a one-time minimum bend radius of 0.75 inch and a repeat minimum bend radius of 2.5 inch. Our low-loss 50 Ohm flexible cable has a peak power rating of 5,600 watts. Our LMR-240-LLPX coax cable can operate at temperatures ranging from -40 to +125 degrees C. The coax cable has a typical insertion loss/attenuation of 1.4, 3.1, 5.4, 7.6, 9.9, 11.5, 12.9, 15.1, 20 and 24.3 dB/100ft at frequency of 30 MHz, 150 MHz, 450 MHz, 900 MHz, 1.5 GHz, 2 GHz, 2.5 GHz, 3.4 GHz, 5.8 GHz and 8 GHz respectively. The LMR-240-LLPX flexible RF cable has a copper center conductor. Pasternack LMR-240-LLPX low-loss coax cables are part of our RF, microwave, and millimeter wave components. These flexible cables and our other RF parts are available for same-day shipping worldwide. Custom RF cable assemblies using LMR-240-LLPX or other coax can be built and shipped the same business day as well, LMR® is a registered trademark of Times Microwave Systems.

1 : $6.79

204

PE36540LF-48

Pasternack Enterprises

Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 48 inches. 10-32 Male to BNC Male Cable 48 Inch Length Using RG178 Coax, RoHS., Radio frequency assembly 10-32 male to BNC male cable 48 inch length using RG178 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 10-32 male to BNC male cable 48 inch length using RG178 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10-32 to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 10-32 cable connection on one end and BNC cable connection on the other. Our 10-32 to BNC cable assemblies have a male gender on end 1 and male on end 2. This 10-32 to BNC cable is a male to male coax assembly, PE36540LF-48, can also be known as a 10-32 plug to BNC plug cable assembly and will be shipped same-day as it is purchased. 10-32 plug to BNC plug cable assembly PE36540LF-48 is built with RG178 which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with 10-32 to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10-32 male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36540LF-48 can also be used in the other direction and will be BNC male to 10-32 male cable assembly if the opposite connectivity is required. 10-32 plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10-32 male to BNC male cable 48 inch length using RG178 coax, RoHS.

1 : $102.99
25 : $97.84
50 : $92.69
100 : $88.57

PE3C5640LF-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.4mm Male to 2.4mm Male Cable 12 Inch Length Using PE-SR405AL Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5640LF-12 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5640LF-12 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax, LF solder.

1 : $346.99
25 : $329.64
50 : $312.29
100 : $298.41

PE3C2740LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. SMA Male to N Female Bulkhead Cable Using LMR-200 Coax with HeatShrink, LF Solder. PE3C2740LF/HS is a SMA male to N female bulkhead cable using LMR-200 coax. This Pasternack SMA male to N female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our male SMA to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2740LF/HS SMA male to N female bulkhead cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W09940LF-48

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC Twinax, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 78 Ohm, Connector Series 2: BNC Twinax, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 78 Ohm, RF Cable Part Number: RG108A/U, RF Cable Type: RG108, RF Cable Impedance: 78 Ohm, Length: 48 inches. BNC Twinax Jack to BNC Twinax Jack Bulkhead Cable 48 Inch Length Using 78 Ohm RG108 Coax, LF Solder., Radio frequency assembly BNC twinax jack to BNC twinax jack bulkhead cable 48 inch length using 78 Ohm RG108 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC twinax jack to BNC twinax jack bulkhead cable 48 inch length using 78 Ohm RG108 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC twinax to BNC twinax cable assembly orders will ship same day as well. Pasternack RF twinax cable assembly is built with BNC twinax cable connection on one end and BNC twinax bulkhead cable connection on the other. Our BNC twinax to BNC twinax cable assemblies have a jack gender on end 1 and jack on end 2. This BNC twinax to BNC twinax cable is a jack to jack twinax assembly, PE3W09940LF-48, can also be known as a BNC twinax female to BNC twinax female cable assembly and will be shipped same-day as it is purchased. BNC twinax female to BNC twinax female cable assembly PE3W09940LF-48 is built with RG108 which is a flexible twinax type. The Pasternack flexible BNC Twinax cable assembly is manufactured with BNC twinax to BNC twinax cable connectors, has a 78 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC twinax jack to BNC twinax jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09940LF-48 can also be used in the other direction and will be BNC twinax jack bulkhead to BNC twinax jack cable assembly if the opposite connectivity is required. BNC twinax female to BNC twinax female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC twinax to BNC twinax cable assembly for quick shipment worldwide. Variations of BNC twinax cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC twinax jack to BNC twinax jack bulkhead cable 48 inch length using 78 Ohm RG108 coax, LF solder.

1 : $254.99
25 : $242.24
50 : $229.49
100 : $219.29

PE3W01240LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using PE-P195 Coax, LF Solder. PE3W01240LF is a SMA male to SMA male cable using PE-P195 coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01240LF SMA male to SMA male cable assembly is constructed with PE-P195 coax.

PE3W00940LF

Pasternack Enterprises

Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. HN Male to N Male Cable Using RG214 Coax, LF Solder. PE3W00940LF is a HN male to N male cable using RG214 coax. This Pasternack HN male to N male cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm N for connector 2. Our male HN to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00940LF HN male to N male cable assembly is constructed with RG214 coax.

PE3W16040LF

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to SMA Male Right Angle Cable Using LMR-100A-UF Coax, LF Solder. PE3W16040LF is a TNC male right angle to SMA male right angle cable using LMR-100A-UF coax. This Pasternack TNC male right angle to SMA male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16040LF TNC male right angle to SMA male right angle cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE36440LF

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to MCX Plug Right Angle Cable Using RG316 Coax, RoHS. PE36440LF is a MMCX plug right angle to MCX plug right angle cable using RG316 coax. This Pasternack MMCX plug right angle to MCX plug right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MCX for connector 2. MMCX right angle to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE36440LF MMCX plug right angle to MCX plug right angle cable assembly is constructed with RG316 coax.

PE3W04140LF

Pasternack Enterprises

Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. HN Male Right Angle to SHV Plug Cable Using RG213 Coax, LF Solder. PE3W04140LF is a HN male right angle to SHV plug cable using RG213 coax. This Pasternack HN male right angle to SHV plug cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm SHV for connector 2. HN right angle to SHV coaxial cable assembly uses 90 degree right angle coax cable connector. Our male HN right angle to plug SHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04140LF HN male right angle to SHV plug cable assembly is constructed with RG213 coax.

PE3W09040LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SSMC Plug Cable Using RG174 Coax with HeatShrink, LF Solder. PE3W09040LF/HS is a TNC female bulkhead to SSMC plug cable using RG174 coax. This Pasternack TNC female bulkhead to SSMC plug cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SSMC for connector 2. Our female TNC bulkhead to plug SSMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09040LF/HS TNC female bulkhead to SSMC plug cable assembly is constructed with RG174 coax.

PE3W09940LF-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC Twinax, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 78 Ohm, Connector Series 2: BNC Twinax, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 78 Ohm, RF Cable Part Number: RG108A/U, RF Cable Type: RG108, RF Cable Impedance: 78 Ohm, Length: 78.74 inches. BNC Twinax Jack to BNC Twinax Jack Bulkhead Cable 200 cm Length Using 78 Ohm RG108 Coax, LF Solder., Radio frequency assembly BNC twinax jack to BNC twinax jack bulkhead cable 200 cm length using 78 Ohm RG108 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC twinax jack to BNC twinax jack bulkhead cable 200 cm length using 78 Ohm RG108 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC twinax to BNC twinax cable assembly orders will ship same day as well. Pasternack RF twinax cable assembly is built with BNC twinax cable connection on one end and BNC twinax bulkhead cable connection on the other. Our BNC twinax to BNC twinax cable assemblies have a jack gender on end 1 and jack on end 2. This BNC twinax to BNC twinax cable is a jack to jack twinax assembly, PE3W09940LF-200CM, can also be known as a BNC twinax female to BNC twinax female cable assembly and will be shipped same-day as it is purchased. BNC twinax female to BNC twinax female cable assembly PE3W09940LF-200CM is built with RG108 which is a flexible twinax type. The Pasternack flexible BNC Twinax cable assembly is manufactured with BNC twinax to BNC twinax cable connectors, has a 78 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC twinax jack to BNC twinax jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09940LF-200CM can also be used in the other direction and will be BNC twinax jack bulkhead to BNC twinax jack cable assembly if the opposite connectivity is required. BNC twinax female to BNC twinax female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC twinax to BNC twinax cable assembly for quick shipment worldwide. Variations of BNC twinax cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC twinax jack to BNC twinax jack bulkhead cable 200 cm length using 78 Ohm RG108 coax, LF solder.

1 : $267.99
25 : $254.59
50 : $241.19
100 : $230.47

PE3W12240LF

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to SC Male Cable Using LMR-195 Coax, LF Solder. PE3W12240LF is a 7/16 DIN male to SC male cable using LMR-195 coax. This Pasternack 7/16 DIN male to SC male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm SC for connector 2. Our male 7/16 DIN to male SC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12240LF 7/16 DIN male to SC male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

Teledyne HiRel

54ACQ240LMQB

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS

Venkel Ltd.

SS1040L-EVL

VENKEL LTD

Rectifier;SOD-123;40V;1A
RoHS : Not Compliant

63,000

Vyrian

SPC560D40L1B3E0X

STMicroelectronics

RISC Microcontroller, 32-Bit, FLASH, SPC56 CPU, 48MHz, CMOS, PQFP64
RoHS : Compliant

11,752

V140LU10AP

Littelfuse Inc

Varistor, 180V, 42J, Through Hole Mount
RoHS : Compliant

10,286

MAX16040LLA29-T

Analog Devices (Maxim Integrated)

10,248

NM25C040LZEMT8

National Semiconductor Corporation

EEPROM, 512X8, Serial, CMOS, PDSO8
RoHS : Not Compliant

7,281

SPC560C40L1C6E0Y

STMicroelectronics

6,621

RD38F3040L0YUQ0

Micron Technology Inc

Memory Circuit, Flash+PSRAM, PBGA88
RoHS : Not Compliant

6,101

M36W0R5040L4ZSE

Micron Technology Inc

Memory Circuit, Flash+PSRAM, CMOS, PBGA56
RoHS : Compliant

5,659

LM340LAZ-12

Texas Instruments

Fixed Positive Standard Regulator, 12V, BIPolar, PBCY3

5,207

HEX40L-KC-90-11-A2-1

TE Connectivity

Circular Connector Adapter, Aluminum Alloy
RoHS : Compliant

4,979

SPC560B40L5B6E0X

STMicroelectronics

Microcontroller, 32-Bit, FLASH, 64MHz, CMOS, PQFP144
RoHS : Compliant

4,650

PF38F3040L0YFQ0

Micron Technology Inc

Memory Circuit, Flash+PSRAM, PBGA88
RoHS : Compliant

4,208

XCKU040-L1FFVA1156E

AMD Xilinx

Field Programmable Gate Array, 530250-Cell, PBGA1156
RoHS : Compliant

4,070

XCKU040-L1FBVA900E

AMD Xilinx

Field Programmable Gate Array, 530250-Cell, PBGA900
RoHS : Compliant

3,189

XCKU040-L1SFVA784I

AMD Xilinx

Field Programmable Gate Array, 530250-Cell, PBGA784
RoHS : Compliant

1,821

TISP4040L1AJR-S

Bourns Inc

Thyristor Surge Protector, 40V V(BO) Max, 22A, DO-214AC
RoHS : Compliant

751

Waytek, Inc.

12089040-L

Aptiv PLC

Weather Pack Male Terminal 20-18 GA #12089040

50 : $0.2148
200 : $0.1805
500 : $0.1706
1,000 : $0.158

76,786

T40L0C2 111-04301

HellermannTyton

HellermannTyton T40L0C22 standard cable tie is a self-locking nylon tie with a 14.6" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications.

100 : $0.2145
200 : $0.1953
500 : $0.174
1,000 : $0.1579
5,000 : $0.1502

18,300

T40L0M4 111-04305

HellermannTyton

HellermannTyton T40L0M44 standard cable tie is a self-locking nylon tie with a 14.4" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications.

1,000 : $0.1404
5,000 : $0.131

11,000

Win Source Electronics

BAS40LT1G

onsemi

DIODE SCHOTTKY 40V 120MA SOT23-3
RoHS : Compliant

16,670 : $0.018
12,500 : $0.02
9,665 : $0.0207
7,010 : $0.0214
4,525 : $0.0221
1,860 : $0.0269

690,000

BAS40L

Nexperia

Schottky barrier diode
RoHS : Compliant

4,055 : $0.074
3,250 : $0.077
2,500 : $0.08
1,745 : $0.0861
1,125 : $0.0891
530 : $0.0951

360,000

B340LA-13-F

Diodes Incorporated

Rectifier Diode Schottky 40V 3A 2-Pin SMA T/R / DIODE SCHOTTKY 40V 3A SMA
RoHS : Compliant

1,795 : $0.1672
1,440 : $0.174
1,110 : $0.1808
775 : $0.1944
500 : $0.2012
235 : $0.2148

339,268

SDMK0340L-7-F

Diodes Incorporated

DIODE SCHOTTKY 40V 30MA SOD323
RoHS : Compliant

6,175 : $0.0486
4,615 : $0.0542
3,570 : $0.0561
2,590 : $0.058
1,675 : $0.0598
690 : $0.0729

335,500

DMN6140LQ-13

Diodes Incorporated

MOSFET N-CH 60V 1.6A SOT23
RoHS : Compliant

4,235 : $0.0709
3,395 : $0.0737
2,615 : $0.0766
1,825 : $0.0824
1,175 : $0.0853
550 : $0.091

130,000

SDM1M40LP8-7

Diodes Incorporated

DIODE SCHOTTKY 40V 1A 2DFN
RoHS : Compliant

3,515 : $0.0854
2,625 : $0.0953
2,035 : $0.0985
1,475 : $0.1018
955 : $0.1051
395 : $0.1281

90,000

DMN6140L-13

Diodes Incorporated

MOSFET N-CH 60V 1.6A SOT23
RoHS : Compliant

2,540 : $0.1182
1,900 : $0.1319
1,470 : $0.1364
1,065 : $0.141
690 : $0.1455
285 : $0.1773

60,000

SMV1247-040LF

Skyworks Solutions Inc

DIODE VARACTOR 15V 20MA 0402 / Varactors Single 15 V Surface Mount 0402
RoHS : Compliant

435 : $0.6952
325 : $0.7754
250 : $0.8021
185 : $0.8288
120 : $0.8556
50 : $1.0427

30,000

LSHM-130-04.0-L-DV-A-S-K-TR

Samtec Inc

RoHS : Compliant

56 : $5.4466
42 : $6.075
32 : $6.2845
24 : $6.494
15 : $6.7035
7 : $8.1699

30,000

SDMP0340LST-7-F

Diodes Incorporated

DIODE ARRAY SCHOTTKY 40V SOT523
RoHS : Compliant

1,020 : $0.2955
760 : $0.3296
590 : $0.341
430 : $0.3523
275 : $0.3637
115 : $0.4432

10,112

CYPD5125-40LQXI

Infineon Technologies AG

CCG5

86 : $3.9117
65 : $4.3631
50 : $4.5135
37 : $4.6639
24 : $4.8144
10 : $5.8676

4,900

CYPD4225-40LQXIT

Infineon Technologies AG

TYPE-C - OTHERS
RoHS : Compliant

154 : $1.9557
115 : $2.1813
89 : $2.2565
65 : $2.3318
42 : $2.407
18 : $2.9335

4,580

BTS5240L

Infineon Technologies AG

Addendum for PCN-Datasheet 2004-018-A
RoHS : Not Compliant

44 : $6.894
33 : $7.6894
26 : $7.9546
19 : $8.2197
12 : $8.4849
5 : $10.341

4,135

SPC560D40L3C4E0X

STMicroelectronics

IC MCU 32BIT 256KB FLASH 100LQFP / e200z0h series Microcontroller IC 32-Bit Single-Core 48MHz 256KB (256K x 8) FLASH 100-LQFP (14x14)
RoHS : Compliant

42 : $9.3437
32 : $10.4213
24 : $10.7809
18 : $11.1405
12 : $11.4988
5 : $14.0149

3,660

HMC1040LP3CETR

Analog Devices Inc

IC AMP VSAT 24GHZ-43.5GHZ 16SMT
RoHS : Compliant

1 : $984.8485

360