| Electronic Components Datasheet Search |
|
3896SLASH100SO Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | 38969-0002 | Molex | - Bulk (Alt: 0389690002) RoHS : Compliant |
| 4,730 | |
| 640389-6 | TE Connectivity | - Bag (Alt: 640389-6) RoHS : Compliant |
| 1,000 | ||
| 3896 | KEMET Corporation | - Boxed Product (Development Kits) (Alt: 3896) RoHS : Compliant |
| 0 | ||
| MIKROE-3896 | MikroElektronika | Mikromedia 5 Touch Screen Display for STM32F7 Capacitive 5-inch 32-Bit ARM 800x480Pixels - Boxed Product (Development Kits) (Alt: MIKROE-3896) RoHS : Compliant |
| 0 | ||
| 8-2150389-6 | TE Connectivity | - Bulk (Alt: 8-2150389-6) RoHS : Not Compliant | 0 | |||
| 687389-6 | TE Connectivity | - Bulk (Alt: 687389-6) RoHS : Not Compliant | 0 | |||
| 1638960000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1638960000) RoHS : Compliant |
| 0 | ||
| 1938968-3 | TE Connectivity | - Bulk (Alt: 1938968-3) RoHS : Compliant | 0 | |||
| Y00894K38960TR13L | VPG Foil Resistors | Resistor Metal Foil 4.3896kOhm 0.01% Bulk - Bulk (Alt: Y00894K38960TR13L) RoHS : Not Compliant |
| 0 | ||
| MPM3896GPJ-30-0000-T | Monolithic Power Systems | MPSMPM3896GPJ-30-0000-T 6V, 30A, SYNC BU - Trays (Alt: MPM3896GPJ-30-0000-T) RoHS : Compliant | 0 | |||
| 1938968-6 | TE Connectivity | - Bulk (Alt: 1938968-6) RoHS : Compliant | 0 | |||
| Y00894K38960TR0L | VPG Foil Resistors | Resistor Metal Foil 4.3896kOhm 0.01% Bulk - Bulk (Alt: Y00894K38960TR0L) RoHS : Not Compliant |
| 0 | ||
| 1855389-6 | TE Connectivity | - Bulk (Alt: 1855389-6) RoHS : Not Compliant | 0 | |||
| 1938967-8 | TE Connectivity | - Bulk (Alt: 1938967-8) RoHS : Compliant | 0 | |||
| 3896300000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 3896300000) RoHS : Compliant |
| 0 | ||
![]() Newark | 38969-0002 | Molex | Terminal Block, Barrier, 2Pos, 8Awg; Pitch Spacing:12.7Mm; No. Of Rows:1 Row; No. Of Positions:2Positions; Wire Size Awg Min:20Awg; Wire Size Awg Max:8Awg; Rated Current:50A; Rated Voltage:600V; Product Range:38969 Series Rohs Compliant: Yes RoHS : Compliant |
| 2,201 | |
| 640389-6 | TE Connectivity | Header, Right Angle, 0.156", 6Way; |Te Connectivity Amp 640389-6 RoHS : Compliant |
| 466 | ||
| LTC3896IFE#PBF | Analog Devices Inc | Dc/Dc Ctrl, Sync Inverting, 835Khz; |Analog Devices, Inc. LTC3896IFE#PBF RoHS : Compliant |
| 58 | ||
| 3896 | KEMET Corporation | Mounting Kit, Aluminum Electrolytic Cap; |Kemet 3896 RoHS : Compliant |
| 50 | ||
| 21038961505 | HARTING Technology Group | Sensor Conn, M12, Plug, 5Pos, Cable; Product Range:-; Sensor Connector Size:M12; Sensor Connector Gender:Male; No. Of Positions:5 Positions; Sensor Contact Type:Crimp Pin; Sensor Connector Mounting:Straight Cable Mount Rohs Compliant: Yes RoHS : Compliant |
| 20 | ||
| LTC3896HFE#PBF | Analog Devices Inc | Dc/Dc Ctrl, Sync Inverting, 835Khz; |Analog Devices, Inc. LTC3896HFE#PBF RoHS : Compliant |
| 20 | ||
| 72-13896 | SPC Multicomp | Test Lead, 4Mm Stackable Banana Plug, 1M; |Multicomp Pro 72-13896 RoHS : Compliant |
| 8 | ||
| FMC00389-60 | Fairview Microwave Inc | Rf - Coaxial Cable Assemblies; |Fairview Microwave FMC00389-60 RoHS : Not Compliant |
| 8 | ||
| T3896 | CK tools | Wire Cutter, Full Flush, 139Mm Lg; |Ck Tools T3896 RoHS : Not Compliant |
| 6 | ||
| 253896 | Hisense Co Ltd | Stand Screws 4Pk; |Hisense 253896 RoHS : Not Compliant |
| 6 | ||
| 21038961505 | HARTING Technology Group | Sensor Connector, M12, Plug, 5Pos; |Harting 21038961505 RoHS : Compliant |
| 2 | ||
| 1738960 | Phoenix Contact | Power Supply, Ac-Dc, 48V, 52.08A; |Phoenix Contact 1738960 RoHS : Compliant |
| 1 | ||
| 103003896 | Schmersal | Safety Light Curtain, 7M, 24Vdc; |Schmersal 103003896 RoHS : Compliant |
| 1 | ||
| ADD73896202 | LG Corporation | Refrigerato Door Foam Assembly; |Lg ADD73896202 RoHS : Not Compliant |
| 1 | ||
| 3896 | Adafruit Industries | 3-Bladed Trifoil Propeller Fan For Dc Motor |Adafruit 3896 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | LTC3896IFE#PBF | Analog Devices Inc | 150V L IQ, Sync Inv DC/DC Cntr RoHS : Compliant |
| 4,715 | |
| LTC3896HFE#TRPBF | Analog Devices Inc | 150V L IQ, Sync Inv DC/DC Cntr RoHS : Compliant |
| 214 | ||
| LTC3896EFE#PBF | Analog Devices Inc | 150V L IQ, Sync Inv DC/DC Cntr RoHS : Compliant |
| 34 | ||
| LTC3896EFE#TRPBF | Analog Devices Inc | 150V L IQ, Sync Inv DC/DC Cntr RoHS : Compliant |
| 28 | ||
| LTC3896HFE#PBF | Analog Devices Inc | 150V L IQ, Sync Inv DC/DC Cntr RoHS : Compliant |
| 4 | ||
| LTC3896IFE#TRPBF | Analog Devices Inc | 150V L IQ, Sync Inv DC/DC Cntr RoHS : Compliant |
| 0 | ||
![]() RS | 1243896 | RS Pro | CURRENT TRANSFORMER ENCLOSED 25A 500:1 4KVRMS UL94-V0 FAULT DETECTION |
| 56 | |
| 389684 | RS Pro | HEAT SHRINK TUBING BLACK 2:1 0.5IN X 32.8FT (12.7MM X 10M) 0.25IN SHRINK |
| 10 | ||
| 389662 | RS Pro | HEAT SHRINK TUBING BLACK POLYOLEFIN 2:1 0.25/0.13IN REEL OF 49FT (15M) |
| 8 | ||
| 1213896 | RS Pro | SOLID STATE RELAY 32V 30A SPST GENERAL PURPOSE DIN RAIL MOUNT SCREW TERMINALS |
| 8 | ||
| 389678 | RS Pro | HEAT SHRINK TUBING BLACK POLYOLEFIN 2:1 0.37/0.19IN REEL OF 39FT (12M) |
| 7 | ||
| 7038960 | RS Pro | PANEL MOUNT INDICATOR YELLOW LED 0.55"(14MM)HOLE 220 VAC/3MA LEAD WIRES |
| 4 | ||
| 2389642 | RS Pro | BRUSHED DC GEARED MOTOR 3V 50GCM 3825RPM 2.51W 260MA SPUR GEARHEAD |
| 4 | ||
| 389690 | RS Pro | HEAT SHRINK TUBING BLACK 2:1 0.75IN X 19.7FT (19MM X 6M) 0.37IN SHRINK |
| 3 | ||
| 7038967 | RS Pro | PANEL MOUNT INDICATOR GREEN LED 0.55"(14MM)HOLE 220 VAC/3MA LEAD WIRES |
| 3 | ||
| 1738960 | Phoenix Contact | TRIO-PM/1AC/48DC/2500W/PT - POWER SUPPLY RoHS : Compliant |
| 2 | ||
| 389640 | RS Pro | HEAT SHRINK TUBING BLACK 2:1 0.13IN X 65.6FT (3.2MM X 20M) 0.06IN SHRINK |
| 1 | ||
| 3896/40 | 3M | MULTICONDUCTOR CABLE,40C,30AWG,7X38,TC, PVC INS, ROUND2FLAT, BLACK PVC JKT, AWM |
| 1 | ||
| FKC-32 (538961) | Festo | MOMENT COMPENSATOR, FOR DGC-G LINEAR DRIVE, SZ 32 |
| 1 | ||
| 3896 | 80/20 Inc | 10 S M5 ANCHOR FASTENER |
| 0 | ||
| 3896 | Adafruit Industries | 3-BLADED TRIFOIL PROPELLER FAN FOR DC MOTOR |
| 0 | ||
![]() Bisco Industries | MS35338-96 | MS Washers | 67,573 | |||
| MS9389-61 | MS Pins | 546 | ||||
| SPC-63896 | Century Spring Corp | 192 | ||||
| 640389-6 | TE Connectivity | RoHS : Compliant | 126 | |||
| 38969-0002 | Molex | 2 | ||||
![]() Rochester Electronics | FAN73896MX | onsemi | 3-Phase Half-Bridge Gate-Drive IC RoHS : Compliant |
| 0 | |
TPS3896PDRYR![]() | Texas Instruments | Voltage Supervisor/Reset IC, Adjustable, 1 Channel, +0.5V, PDSO6 RoHS : Compliant |
| 570,706 | ||
| DS3896M | National Semiconductor Corporation | BTL Trapezoidal Transceivers RoHS : Not Compliant |
| 1,224 | ||
| DS3896MX | National Semiconductor Corporation | Line Transceiver, 8 Func, 8 Driver, 8 Rcvr, BIPolar, PDSO20 RoHS : Not Compliant |
| 8,000 | ||
| DS3896N | National Semiconductor Corporation | BTL Trapezoidal Transceivers RoHS : Not Compliant |
| 3,420 | ||
![]() Sager | 8-2150389-6 | TE Connectivity | Bench Top Tools OC-PMC-AT-E-N-S | 0 | ||
| FN389-6-21 | TE Connectivity | AC Power Entry Modules 6A FL MT 2FS HI-PRF POWER ENTRY MODULES RoHS : Compliant |
| 0 | ||
| 687389-6 | TE Connectivity | Other Tools HDM HB 9EMPR200T220O G | 0 | |||
| 3273896 | Phoenix Contact | DIN Rail Terminal Blocks PTFIX 10/12X4 OG RoHS : Compliant |
| 0 | ||
| 0389690003 | Molex | Barrier Terminal Blocks .250 TRI BARRIER 03P RoHS : Compliant |
| 0 | ||
| FN389-6-22 | TE Connectivity | AC Power Entry Modules 6A FL MT 2FS HI-PRF POWER ENTRY MODULES RoHS : Compliant |
| 0 | ||
| 1138965 | Phoenix Contact | Charge Controllers CHARX SEC-3150 RoHS : Compliant |
| 0 | ||
| 2423896-1 | TE Connectivity | EMI Gaskets, Sheets, Absorbers & Shielding CONN G SNG 5015 SHELL 14 RoHS : Compliant |
| 0 | ||
| 389615080860007 | Honeywell Sensing and Control / Clarostat | Industrial Motion & Position Sensors RESISTIVE & OPTICAL | 0 | |||
| 3-2176389-6 | TE Connectivity | RQ 1206 249R 0.1% 10PPM 5K RL RoHS : Compliant |
| 0 | ||
| 438962-000 | TE Connectivity | TE Connectivity XTPA080 | 0 | |||
| 1-338967-2 | TE Connectivity | Other Tools 16P. I/O CONNECTOR RoHS : Compliant |
| 0 | ||
| 1-1879389-6 | TE Connectivity | Headers & Wire Housings MGDU1-00016,US-L330Isat0.18Irms0.16 RoHS : Compliant |
| 0 | ||
| 0389690010 | Molex | Barrier Terminal Blocks 12.70MM SR CS NO MTG PC STL 10 CKT RoHS : Compliant |
| 0 | ||
| 1738960-2 | TE Connectivity | Fiber Optic Connectors CONN ASY MOD 24 POS LUXCIS RoHS : Compliant |
| 0 | ||
![]() TME | 505110-3896 | Molex | Connector: FFC/FPC; gold-plated; SMT; 500mA; 50V; Easy-On; PIN: 38 |
| 21,000 | |
| 2338964-1 | TE Connectivity | 2338964-1 |
| 3,729 | ||
| 640389-6 | TE Connectivity | Connector: wire-board; plug; male; PIN: 6; Inom: 7A,14.24A; THT RoHS : Compliant |
| 249 | ||
| 3038969 | Phoenix Contact | Comb bridge; grey; terminals: 2; 5mm RoHS : Compliant |
| 137 | ||
| 1738965-1 | TE Connectivity | 1738965-1 RoHS : Compliant |
| 49 | ||
| 38969-0009 | Molex | Connector: PCB terminal block; 50A; 600V; PIN: 9; straight; screw |
| 21 | ||
| 3896300000 | Weidmüller Interface GmbH & Co. KG | 3896300000 |
| 0 | ||
| 00138961 | GSR | Tap: metric; M20; fine thread,right hand thread; 2; L: 80mm; 12mm |
| 0 | ||
| 1238960 | Phoenix Contact | Connector: M12; contact insert; PIN: 12; 30V; straight; SMT; CuZn RoHS : Compliant |
| 0 | ||
| 1873896 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON M; 12A; 630V RoHS : Compliant |
| 0 | ||
| 004113896 | ETI Polam | Fuse: fuse; NH4a; ceramic,industrial; 1.443kA; 400VAC; gTr; WT-NH |
| 0 | ||
| 3-143-896 | Schurter Electronic Components | Nut; plastic; FIZ,FUL; -40÷85°C; Fuse: cylindrical |
| 0 | ||
| 0538960000 | Weidmüller Interface GmbH & Co. KG | Splice terminal: rail; SAK; 10A; 380V; screw terminal; 22AWG÷12AWG RoHS : Compliant |
| 0 | ||
| B63896 | Zakłady Kablowe BITNER | Wire: mains; BiTflame 1000; 3G2.5mm2; LSZH; orange; Core: Cu; 11.8mm |
| 0 | ||
| 10043896 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 38; THT; 1.5A; 60V |
| 0 | ||
![]() Interstate Connecting Components | 38969-0002 | Molex | 12.70MM SR CS NO MTG PC S CKT |
| 388 | |
| CD38963001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55D0211-20-2L(S82M) | 0 | |||
| 10-580138-96S(LC) | Amphenol Industrial Operations | Crimp Bayonet Receptacle, OD | 0 | |||
| 2423896-1 | TE Connectivity | CONN G SNG 5015 SHELL 14 RoHS : Compliant | 0 | |||
| 3-2176389-6 | TE Connectivity | RQ 1206 249R 0.1% 10PPM 5K RL RoHS : Compliant |
| 0 | ||
| 1-338967-2 | TE Connectivity | 16P. I/O CONNECTOR RoHS : Compliant |
| 0 | ||
| 1-1879389-6 | TE Connectivity | MGDU1-00016,US-L330Isat 0.18Irms0.16 RoHS : Compliant |
| 0 | ||
| 1738960-2 | TE Connectivity | CONNECTOR ASY,MODULE,24 8 POS,ARINC RoHS : Compliant |
| 0 | ||
| 1338969-1 | TE Connectivity | SUPPORT, REEL |
| 0 | ||
| 6-2176389-6 | TE Connectivity | RQ 1206 511R 0.1% 10PPM 5K RL RoHS : Compliant |
| 0 | ||
| 9-2176389-6 | TE Connectivity | RQ 1206 1K05 0.1% 10PPM 5K RL RoHS : Compliant |
| 0 | ||
| 1-1856389-6 | TE Connectivity | BOITIER F-F 4 VOIES LANG 6,3 | 0 | |||
| 1-2329389-6 | TE Connectivity | PB OFF/ON FC GRE M1 TERM WHI L RoHS : Compliant |
| 0 | ||
| 1338968-2 | TE Connectivity | LEADIN,TERMINAL |
| 0 | ||
| 9-1856389-6 | TE Connectivity | PGC 6-8 (C=8,4MM) JAUNE RoHS : Compliant | 0 | |||
![]() PEI Genesis | 10-580138-96S | Amphenol Corporation |
| 0 | ||
| 710038-96 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 1-2176389-6 | TE Connectivity | Passive Components RoHS : Compliant |
| 3,300 | |
| 640389-6 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 2,546 | ||
| 2338964-1 | TE Connectivity | Connectors |
| 2,461 | ||
| 1-640389-6 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 561 | ||
| M3896 | Heyco | FLEX LTSCG 1125 BLACK RoHS : Compliant |
| 165 | ||
| 1738965-1 | TE Connectivity | ARINC RoHS : Compliant |
| 63 | ||
| 389609001230807 | Honeywell Sensing and Control | Switch |
| 10 | ||
| 1338967-1 | TE Connectivity | PLATE, BASE |
| 5 | ||
![]() Richardson RFPD | SI5341B-D13896-GMR | Skyworks Solutions Inc | Fractional Synthesizer Technology Clock Generators RoHS : Compliant | 0 | ||
| LTC3896IFE#PBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Inverting 900kHz Automotiv RoHS : Compliant |
| 0 | ||
| LTC3896EFE#TRPBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Inverting 900kHz 31-Pin TS RoHS : Compliant |
| 0 | ||
| LTC3896HFE#PBF | Analog Devices Inc | DC/DC CNTRLR Single-OUT Inverting 900kHz Automotiv RoHS : Compliant |
| 0 | ||
| LTC3896IFE#TRPBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Inverting 900kHz 31-Pin TS RoHS : Compliant |
| 0 | ||
| SI5341B-D13896-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| 935389632431 | NXP Semiconductors | CAN 8Mbps Standby 5V Automotive AEC-Q100 8-Pin HVS RoHS : Compliant | 0 | |||
| LTC3896EFE#PBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Inverting 900kHz 31-Pin T RoHS : Compliant |
| 0 | ||
| 1738965-1 | TE Connectivity | Connector Accessories Connector Kit Straight Beige RoHS : Compliant | 0 | |||
| 225389-6 | TE Connectivity | Conn Type N 0Hz to 11GHz 50Ohm Crimp RA Cable Moun RoHS : Compliant | 0 | |||
| LTC3896HFE#TRPBF | Analog Devices Inc | DC/DC CNTRLR Single-OUT Inverting 900kHz 31-Pin TS RoHS : Compliant |
| 0 | ||
![]() Rutronik | Q65113A3896 | ams OSRAM Group | Oslon Square CRI90 5000K >260lm RoHS : Compliant |
| 3,000 | |
![]() Chip 1 Exchange | 505110-3896 | Molex | INSTOCK | 27,300 | ||
| 38969-0002 | Molex | INSTOCK | 16,779 | |||
| 38969-0010 | Molex | INSTOCK | 1,791 | |||
| 54104-3896 | Molex | INSTOCK RoHS : Compliant | 1,034 | |||
| XBT3896701 | SOLEC | INSTOCK | 500 | |||
| 2N3896 | General Electric Company | INSTOCK | 302 | |||
![]() Avnet Abacus | 3896 | KEMET Corporation | (Alt: 3896) RoHS : Compliant | 0 | ||
| 1338962 | Phoenix Contact | SMKDS 1 235 BD910 SMKDS1235BD910 (Alt: 1338962) RoHS : Compliant | 0 | |||
| 687389-6 | TE Connectivity | (Alt: 687389-6) RoHS : Not Compliant | 0 | |||
| 389690006 | Molex | (Alt: 389690006) RoHS : Compliant | 0 | |||
| 389690006 | Molex | (Alt: 389690006) RoHS : Compliant | 0 | |||
| 1738960-2 | TE Connectivity | (Alt: 1738960-2) RoHS : Compliant | 0 | |||
| 1338969-1 | TE Connectivity | (Alt: 1338969-1) RoHS : Compliant | 0 | |||
| FN389-6-21 | TE Connectivity | (Alt: 800266-SF) RoHS : Compliant | 0 | |||
| FN389-6-22 | TE Connectivity | (Alt: 800267-SF) RoHS : Compliant | 0 | |||
| 1638960000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1638960000) RoHS : Compliant | 0 | |||
| 1-338967-2 | TE Connectivity | (Alt: 1-338967-2) RoHS : Compliant | 0 | |||
| 1038960000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1038960000) RoHS : Compliant | 0 | |||
| 1238960000 | Weidmüller Interface GmbH & Co. KG | Conn Shrouded Header HDR 11 POS 508mm Solder RA ThruHole Box (Alt: 1238960000) RoHS : Compliant | 0 | |||
| 0538960000 | Weidmüller Interface GmbH & Co. KG | (Alt: 0538960000) RoHS : Compliant | 0 | |||
| 8-2150389-6 | TE Connectivity | (Alt: 8-2150389-6) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | 640389-6 | TE Connectivity | (Alt: 640389-6) RoHS : Compliant | 0 | ||
| 0389690004 | Molex | (Alt: 0389690004) RoHS : Compliant | 0 | |||
![]() Avnet Silica | C13896_STRADA-SQ-FS | LEDIL | Square Lens For MKR LUXEON M XML XTE LUXEON MZ LED (Alt: C13896_STRADA-SQ-FS) RoHS : Compliant | 0 | ||
| MPM3896GPJ-30-0000-T | Monolithic Power Systems | MPSMPM3896GPJ300000T 6V 30A SYNC BU (Alt: MPM3896GPJ-30-0000-T) RoHS : Compliant | 0 | |||
| MPM3896GPJ-30-0000-Z | Monolithic Power Systems | Power Module (Alt: MPM3896GPJ-30-0000-Z) RoHS : Compliant | 0 | |||
| MPM3896GPJ-20-001C-T | Monolithic Power Systems | Power Module (Alt: MPM3896GPJ-20-001C-T) RoHS : Compliant | 0 | |||
| MPM3896GPJ-30-0025-T | Monolithic Power Systems | Power Module (Alt: MPM3896GPJ-30-0025-T) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 3896068-01 | Mupac Corp | IN STOCK SHIP TODAY | 32 | ||
| 640389-6 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 5 | ||
| 1638960000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 4 | ||
| PS141338-96 | CAE Inc | IN STOCK SHIP TODAY | 1 | |||
![]() DB Roberts | MS35338-96 | Military Specifications |
| 8 | ||
| 884523896 | Essentra Components | HANDLE, BRIDGE WITH 96MM LENGT | 0 | |||
| 20593896 | Essentra Components | 0 | ||||
| 884573896 | Essentra Components | HANDLE, BRIDGE WITH 96MM LENGT | 0 | |||
| 13896 | Heyco | UTRG 1093 V0 BLACK | 0 | |||
| M3896 | Heyco | FLEX LTSCG 1125 BLACK RoHS : Compliant | 0 | |||
| 493896 | Essentra Components | 0 | ||||
![]() EBV Elektronik | C13896_STRADA-SQ-FS | LEDIL | Square Lens For MKR LUXEON M XML XTE LUXEON MZ LED (Alt: C13896_STRADA-SQ-FS) RoHS : Compliant | 0 | ||
![]() FDH Electronics | ET30738-96 OFHC | Whitmore/Wirenetics | Wire and Cable | 3,776 | ||
![]() Flip Electronics | FAN73896MX | onsemi | Stock, Ship Today RoHS : Compliant |
| 940 | |
![]() Maritex | 53896 | NTEC | Extension power cord; 3 cores; 1m; IEC C14 male; IEC C13 female; black; 1,0 mm |
| 2 | |
![]() Master Electronics | 43896 | Molex | MOL PLUG 2 PIN PANEL MOUNT RoHS : Compliant |
| 50 | |
| 389613G | EECO Switch | RoHS : Compliant |
| 2 | ||
| FN389-6-21 | TE Connectivity | Power Entry Module Filtered M 3 POS 250VAC 6A Switch/Fuse ST 1 Port RoHS : Compliant |
| 0 | ||
| 3273896 | Phoenix Contact | Distribution block - nom. voltage: 450 V - nominal current: 32 A - connection method: Push-in connection - Push-in connection - number of connections: 13 - cross section: 0.2 mm² - 6 mm² - AWG: 24 - 10 - width: 46.3 mm - height: 21.7 mm - color: orange - mounting type: for snapping onto a DIN rail adapter RoHS : Compliant |
| 0 | ||
| FN389-6-22 | TE Connectivity | Power Entry Module Filtered M 3 POS 250VAC 6A Switch/Fuse ST 1 Port MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1138965 | Phoenix Contact | CHARX SEC-3150 RoHS : Compliant |
| 0 | ||
| 2423896-1 | TE Connectivity | Conn G SNG 5015 Shell 14 RoHS : Compliant |
| 0 | ||
| CELBXK11-38968-2-V | Sensata Circuit Breakers | Circuit Breaker Hydraulic Magnetic 2 Pole CEL Series | Sensata - Airpax CELBXK11-38968-2-V RoHS : Compliant |
| 0 | ||
| 3896/40 -275-FT | 3M Interconnect | .025 30 AWG Stranded Mass RoHS : Compliant |
| 0 | ||
| 3896300000 | Weidmüller Interface GmbH & Co. KG | Enclosures Accessories Spacer RoHS : Compliant |
| 0 | ||
| 3-2176389-6 | TE Connectivity | RQ 1206 249R 0.1% 10PPM 5K RL MOQ Reduction RoHS : Compliant |
| 0 | ||
| 438962-000 | TE Connectivity | Misc Products MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1-338967-2 | TE Connectivity | 16P. I/O CONNECTOR MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1-1879389-6 | TE Connectivity | MGDU1-00016 US-L330Isat0.18Irms0.16 Inductor MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3896/80SO-275 | 3M Interconnect | .025 30 AWG STRANDED MASS RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 21038962415 | HARTING Technology Group | Circular Metric Connectors M12 S CODE 04P FE STRAIGHT SCL RoHS : Compliant |
| 50 | |
| 21038961525 | HARTING Technology Group | Circular Metric Connectors M12 K CODE 05P MA STRAIGHT PP RoHS : Compliant |
| 50 | ||
| 21038962515 | HARTING Technology Group | Circular Metric Connectors M12 K CODE 05P FE STRAIGHT SCL RoHS : Compliant |
| 50 | ||
| 0538960000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks DK 4/35 1D A1 RoHS : Compliant |
| 24 | ||
| 21038961510 | HARTING Technology Group | Circular Metric Connectors M12 L CODE 05P MA STRAIGHT SCL RoHS : Compliant |
| 24 | ||
| 21038962410 | HARTING Technology Group | Circular Metric Connectors M12 L CODE 04P FE STRAIGHT SCL RoHS : Compliant |
| 5 | ||
| 21038962525 | HARTING Technology Group | Circular Metric Connectors M12 K CODE 05P FE STRAIGHT PP RoHS : Compliant |
| 5 | ||
| 21038962520 | HARTING Technology Group | Circular Metric Connectors M12 L CODE 05P FE STRAIGHT PP RoHS : Compliant |
| 3 | ||
| 21038962420 | HARTING Technology Group | Circular Metric Connectors M12 L CODE 04P FE STRAIGHT PP RoHS : Compliant |
| 1 | ||
| 21038961520 | HARTING Technology Group | Circular Metric Connectors M12 L CODE 05P MA STRAIGHT PP RoHS : Compliant |
| 1 | ||
| 21038962510 | HARTING Technology Group | Circular Metric Connectors M12 L CODE 05P FE STRAIGHT SCL RoHS : Compliant |
| 0 | ||
| 389671-B21-AX | Axiom Manufacturing | Axiom 389671-B21-AX Infiniband SAS Cable |
| 0 | ||
| 389668-B21-AX | Axiom Manufacturing | Axiom 389668-B21-AX Infiniband SAS Cable |
| 0 | ||
| 21038961410 | HARTING Technology Group | Circular Metric Connectors M12 L CODE 04P MA SCL RoHS : Compliant |
| 0 | ||
| 21038961505 | HARTING Technology Group | M12 Power male L-coded, crimp connector RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE33896 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50. SMA Male to SMA Female Cable Using RG401 Coax. PE33896 is a SMA male to SMA female cable using RG401 coax. This Pasternack SMA male to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE33896 SMA male to SMA female cable assembly is constructed with RG401 coax. | 141 | ||
| PE38962-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG180B/U, RF Cable Type: RG180, RF Cable Impedance: 95 Ohm, Length, Max: 24 inches. TNC Male to TNC Male Cable 24 Inch Length Using 95 Ohm RG180 Coax., Radio frequency assembly TNC male to TNC male cable 24 inch length using 95 Ohm RG180 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC male cable 24 inch length using 95 Ohm RG180 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assembly has male gender on end 1 and male on end 2. PE38962-24 can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. TNC plug to TNC plug cable assembly PE38962-24 is built with RG180 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE38962-24 RF cable are available on our downloadable PDF datasheet. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC RF cable assembly as per your requirements. |
| 134 | ||
| PE38962-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG180B/U, RF Cable Type: RG180, RF Cable Impedance: 95 Ohm, Length, Max: 72 inches. TNC Male to TNC Male Cable 72 Inch Length Using 95 Ohm RG180 Coax., Radio frequency assembly TNC male to TNC male cable 72 inch length using 95 Ohm RG180 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC male cable 72 inch length using 95 Ohm RG180 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assembly has male gender on end 1 and male on end 2. PE38962-72 can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. TNC plug to TNC plug cable assembly PE38962-72 is built with RG180 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE38962-72 RF cable are available on our downloadable PDF datasheet. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC RF cable assembly as per your requirements. |
| 86 | ||
| PE33896-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to SMA Female Cable 6 Inch Length Using RG401 Coax., Radio frequency assembly SMA male to SMA female cable 6 inch length using RG401 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 6 inch length using RG401 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE33896-6, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE33896-6 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33896-6 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 6 inch length using RG401 coax. |
| 21 | ||
| PE33896LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Female Cable 36 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly SMA male to SMA female cable 36 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 36 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE33896LF-36, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE33896LF-36 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33896LF-36 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 36 inch length using RG401 coax, RoHS. |
| 20 | ||
| PE33896LF-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to SMA Female Cable 18 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly SMA male to SMA female cable 18 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 18 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE33896LF-18, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE33896LF-18 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33896LF-18 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 18 inch length using RG401 coax, RoHS. |
| 20 | ||
| PE33896-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Female Cable 36 Inch Length Using RG401 Coax., Radio frequency assembly SMA male to SMA female cable 36 inch length using RG401 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 36 inch length using RG401 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE33896-36, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE33896-36 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33896-36 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 36 inch length using RG401 coax. |
| 20 | ||
| PE33896-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMA Female Cable 60 Inch Length Using RG401 Coax., Radio frequency assembly SMA male to SMA female cable 60 inch length using RG401 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 60 inch length using RG401 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE33896-60, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE33896-60 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33896-60 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 60 inch length using RG401 coax. |
| 20 | ||
| PE7389-6 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 3 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.15:1, Attenuation: 6 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 6 dB Fixed Attenuator, N Male to N Female Black Anodized Aluminum Heatsink Body Rated to 50 Watts Up to 3 GHz. PE7389-6 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7389-6 6 dB attenuator is rated for up to 3 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7389-6 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 5 | ||
| PE3W13896 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. N Male to N Female Bulkhead Cable Using RG196 Coax. PE3W13896 is a N male to N female bulkhead cable using RG196 coax. This Pasternack N male to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13896 N male to N female bulkhead cable assembly is constructed with RG196 coax. | 0 | |||
| PE38963-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SSMA Female Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly SMA male to SSMA female cable 48 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SSMA female cable 48 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SSMA cable connection on the other. Our SMA to SSMA cable assembly has male gender on end 1 and female on end 2. PE38963-48 can also be known as a SMA plug to SSMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to SSMA jack cable assembly PE38963-48 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE38963-48 RF cable are available on our downloadable PDF datasheet.PE38963-48 can also be used in the other direction and will be SSMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3896 | Pasternack Enterprises | 0 | ||||
| PE38963-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SMA Male to SSMA Female Cable 72 Inch Length Using RG316 Coax., Radio frequency assembly SMA male to SSMA female cable 72 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SSMA female cable 72 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SSMA cable connection on the other. Our SMA to SSMA cable assembly has male gender on end 1 and female on end 2. PE38963-72 can also be known as a SMA plug to SSMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to SSMA jack cable assembly PE38963-72 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE38963-72 RF cable are available on our downloadable PDF datasheet.PE38963-72 can also be used in the other direction and will be SSMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W03896 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. TNC Male to N Female Cable Using LMR-240 Coax. PE3W03896 is a TNC male to N female cable using LMR-240 coax. This Pasternack TNC male to N female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our male TNC to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03896 TNC male to N female cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3389-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 60 inches. BNC Male Right Angle to BNC Male Right Angle Cable 60 Inch Length Using RG316-DS Coax., Radio frequency assembly BNC male right angle to BNC male right angle cable 60 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male right angle to BNC male right angle cable 60 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and right angle BNC cable connection on the other. Our right angle BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3389-60, can also be known as a right angle BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3389-60 is built with RG316-DS which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC right angle male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to BNC male right angle cable 60 inch length using RG316-DS coax. |
| 0 | ||
![]() TE Connectivity | 640389-6 | TE Connectivity | 06P MTA156 HDR ASSY SQ R/A F/L PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 6 | PCB Header & Receptacle | Part Number: 640389-6 | Internal Number: 640389-6 | TE Connectivity RoHS : Compliant |
| 959 | |
| 1738965-1 | TE Connectivity | BACKPLANE CONNECTOR KIT Number of Fibers: 24 Fiber Optic Product Type: Connector Kit for Optical Termini Backplane Fiber Optic | 24 Connector Kit for Optical Termini | Part Number: 1738965-1 | Internal Number: 1738965-1 | TE Connectivity RoHS : Compliant |
| 37 | ||
![]() Vyrian | 38968 | Protektive Pak | 18,521 | |||
| 38961 | Protektive Pak | 18,041 | ||||
| 38969 | Protektive Pak | 14,247 | ||||
| 38962 | Protektive Pak | 14,043 | ||||
| 1873896 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 12,022 | |||
| LTC3896IFE-TRPBF | Analog Devices Inc | 11,537 | ||||
| LTC3896EFE#TRPBF | Analog Devices Inc | Switching Controller, Current-mode, 900kHz Switching Freq-Max, CMOS, PDSO31 RoHS : Compliant | 9,596 | |||
| 38964 | Protektive Pak | 9,475 | ||||
TPS3896ADRYT![]() | Texas Instruments | Power Supply Support Circuit, Adjustable, 1 Channel, +0.5V, PDSO6 RoHS : Compliant | 9,445 | |||
| LTC3896IFE#PBF | Analog Devices Inc | Switching Controller, Current-mode, 900kHz Switching Freq-Max, CMOS, PDSO31 RoHS : Compliant | 9,213 | |||
| LTC3896HFE#PBF | Analog Devices Inc | Switching Controller, Current-mode, 900kHz Switching Freq-Max, CMOS, PDSO31 RoHS : Compliant | 8,751 | |||
| LTC3896IFE#TRPBF | Analog Devices Inc | Switching Controller, Current-mode, 900kHz Switching Freq-Max, CMOS, PDSO31 RoHS : Compliant | 6,267 | |||
| LTC3896IFE-PBF | Analog Devices Inc | 6,026 | ||||
| 5962-01-389-6545 | Analog Devices Inc | 5,186 | ||||
| SYN38963 | Kingston Technology Company | 2,465 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |