 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
3678 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Onlinecomponents.com | 121224-3678 | ITT Interconnect Solutions | Circular Connector - Wall Mount - Contact Arrangement: 20-2 - Pins - Bayonet Coupling |
| 0 | |
| 121575-3678 | ITT Interconnect Solutions | Conn Circular PIN 3 POS Crimp ST Cable Mount 3 Terminal 1 Port Automotive |
| 0 | ||
| 155850-3678 | ITT Interconnect Solutions | Connector Miniature Circular Pin 4 Position Solder Cup Straight Cable Mount 4 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 151117-3678 | Molex | RoHS : Compliant |
| 0 | ||
| 3678-STT-12-YELLOW | ICO Rally | RoHS : Compliant |
| 0 | ||
| 143-3678-000 | ITT Interconnect Solutions | Insul Assy KPDR8-3S RoHS : Compliant |
| 0 | ||
| 11-32-3678 | Molex | ROD COUPLING AM60099H237 RoHS : Compliant |
| 0 | ||
 Verical | 367-8430-09-503 | Dialight | 15/32in Incand. PMI Base RoHS : Exempt |
| 6,691 | |
| 367831201 | Molex | Conn Wire to Board HDR 12 POS 3.5mm Solder RA Side Entry Thru-Hole MX120G Carton RoHS : Compliant |
| 3,840 | ||
| 36783-1212 | Molex | MX120G Sealed Header Connector Assembly, 12 Circuit, Gray Housing with No Color Mark RoHS : Compliant |
| 3,740 | ||
| 367-8430-09-804 | Dialight | Lamp Holders and Accessories SUB MIN Panel Indicator RoHS : Must Be Verified |
| 1,338 | ||
| 367831201 | Molex | Conn Wire to Board HDR 12 POS 3.5mm Solder RA Side Entry Thru-Hole MX120G Carton RoHS : Compliant |
| 576 | ||
| 367-8430-09-808 | Dialight | Lamp Holders & Accessories SUB MIN. PANEL IND. |
| 300 | ||
| 367-8430-0932-503 | Dialight | Uni-Color Panel Mount Indicator RoHS : Not Compliant |
| 282 | ||
| 367831201 | Molex | Conn Wire to Board HDR 12 POS 3.5mm Solder RA Side Entry Thru-Hole MX120G Carton RoHS : Compliant |
| 252 | ||
| 367-8430-09-809 | Dialight | Lamp Holders & Accessories Based Indicator |
| 103 | ||
| 367-8430-0972-503 | Dialight | Uni-Color Green RoHS : Must Be Verified |
| 56 | ||
| 367-8430-09-810 | Dialight | Panel Indicators are designed for commercial and industrial applications RoHS : Not Compliant |
| 49 | ||
| 367-8430-0932-503 | Dialight | Uni-Color Panel Mount Indicator RoHS : Not Compliant |
| 45 | ||
| 367-8430-0932-503 | Dialight | Uni-Color Panel Mount Indicator RoHS : Not Compliant |
| 45 | ||
| 367-8430-0971-503 | Dialight | Uni-Color Red RoHS : Must Be Verified |
| 42 | ||
| 367-8430-0973-503 | Dialight | Uni-Color Yellow RoHS : Must Be Verified |
| 14 | ||
 Avnet Americas | 75-107136-78S | Amphenol Corporation | - Bulk (Alt: 75-107136-78S) RoHS : Not Compliant |
| 0 | |
| CIR02R-36-78SX-F80-VO | ITT Interconnect Solutions | - Bulk (Alt: CIR02R-36-78SX-F80-VO) RoHS : Not Compliant |
| 0 | ||
| CIR020R-36-78SY-F80 | ITT Interconnect Solutions | - Bulk (Alt: CIR020R-36-78SY-F80) RoHS : Not Compliant |
| 0 | ||
| ACS02E36-78S(003) | Amphenol Corporation | - Bulk (Alt: ACS02E36-78S(003)) RoHS : Not Compliant |
| 0 | ||
| 10-194236-78S | Amphenol Corporation | - Bulk (Alt: 10-194236-78S) RoHS : Not Compliant |
| 0 | ||
| 75-194236-78S | Amphenol Corporation | - Bulk (Alt: 75-194236-78S) RoHS : Not Compliant |
| 0 | ||
| 88-194236-78S | Amphenol Corporation | - Bulk (Alt: 88-194236-78S) RoHS : Not Compliant |
| 0 | ||
| CIR020R-36-78PX-F80 | ITT Interconnect Solutions | - Bulk (Alt: CIR020R-36-78PX-F80) RoHS : Not Compliant |
| 0 | ||
| CIR06CFZ-36-78S-F80-VO | ITT Interconnect Solutions | - Bulk (Alt: CIR06CFZ-36-78S-F80-VO) RoHS : Not Compliant |
| 0 | ||
| CIR06CFZGG-36-78S-F80 | ITT Interconnect Solutions | - Bulk (Alt: CIR06CFZGG-36-78S-F80) RoHS : Not Compliant |
| 0 | ||
| 1367870000 | Weidmüller Interface GmbH & Co. KG | BL 3.50/03/90 SN OR BX PRT - Bulk (Alt: 1367870000) RoHS : Not Compliant | 0 | |||
| CIR06AF-36-78P-F80-VO | ITT Interconnect Solutions | - Bulk (Alt: CIR06AF-36-78P-F80-VO) RoHS : Not Compliant |
| 0 | ||
| CIR06F-36-78S-F80 | ITT Interconnect Solutions | CIR 14C 128 216 SKT PLUG - Bulk (Alt: CIR06F-36-78S-F80) RoHS : Not Compliant |
| 0 | ||
| CIR06LCF-36-78PX-F80 | ITT Interconnect Solutions | - Bulk (Alt: CIR06LCF-36-78PX-F80) RoHS : Not Compliant |
| 0 | ||
| CIR01A-36-78P-F80-T12 | ITT Interconnect Solutions | - Bulk (Alt: CIR01A-36-78P-F80-T12) RoHS : Not Compliant |
| 0 | ||
 Mouser Electronics | 36783-1201 | Molex | Automotive Connectors MX120G 12P SHRD RA HDR ASY DR 3.2/3.5 RoHS : Compliant |
| 1,403 | |
| 36783-1202 | Molex | Automotive Connectors 12P MX120G HEADER ASSEMBLY BROWN RoHS : Compliant |
| 620 | ||
| 36783-1208 | Molex | Automotive Connectors 12P MX120G HEADER ASSEMBLY WHITE RoHS : Compliant |
| 149 | ||
| 367-8430-0971-503 | Dialight | Lamp Holders & Accessories SUB MINITURE PANEL INDICATOR |
| 65 | ||
| 367-8430-0972-503 | Dialight | Lamp Holders & Accessories SUB MINITURE PANEL INDICATOR RoHS : Not Compliant |
| 15 | ||
| 367-8430-0937-503 | Dialight | Lamp Holders & Accessories SUB MINITURE PANEL INDICATOR RoHS : Not Compliant |
| 3 | ||
| HLCD-40-05.91-BLS-BLS-2 | Samtec Inc | Rectangular Cable Assemblies High Speed Hermaphroditic Cable |
| 0 | ||
| 367-8430-09-503 | Dialight | Lamp Holders & Accessories INDICATOR HOUSING RoHS : Compliant |
| 0 | ||
| 36786.4 | icotek Corporation | Cable Mounting & Accessories PFS/SKL 8 - 11 |
| 0 | ||
| 36789.22 | icotek Corporation | Cable Mounting & Accessories PFSZ2/SKL 22 |
| 0 | ||
| 367-8430-0931-503 | Dialight | Panel Mount Indicators - Neon & Incandescent SUB MINITURE PANEL INDICATOR RoHS : Not Compliant |
| 0 | ||
| 367-8430-0973-503 | Dialight | Panel Mount Indicators - Neon & Incandescent SUB MINITURE PANEL INDICATOR RoHS : Not Compliant |
| 0 | ||
| 3678A | ABB Low Voltage Products and Systems | Electrical Enclosure Accessories ADPT,45DEG,FS/FD |
| 0 | ||
| 36783-1207 | Molex | Automotive Connectors 12P MX120G HEADER ASSEMBLY YELLOW RoHS : Compliant |
| 0 | ||
| 36786.2 | icotek Corporation | Cable Mounting & Accessories PFS/SKL 3 - 6 |
| 0 | ||
 Newark | 2367819-1 | TE Connectivity | Contact, Tab, 28-30Awg, Crimp; |Te Connectivity 2367819-1 RoHS : Compliant |
| 24,000 | |
| 2367819-1 | TE Connectivity | Contact, Tab, 28-30Awg, Crimp; Product Range:Dynamic D-1000 Series; Contact Gender:Tab; Contact Termination Type:Crimp; Wire Size Awg Max:28Awg; Contact Plating:Gold Plated Contacts; Wire Size Awg Min:30Awg Rohs Compliant: Yes |Te Connectivity 2367819-1 RoHS : Compliant |
| 24,000 | ||
| 2367817-2 | TE Connectivity | Contact, Socket, 22-28Awg, Crimp; Product Range:Dynamic D-1000 Series; Contact Gender:Socket; Contact Termination Type:Crimp; Wire Size Awg Max:22Awg; Contact Plating:Gold Plated Contacts; Wire Size Awg Min:28Awg Rohs Compliant: Yes RoHS : Compliant |
| 19,992 | ||
| 2367819-1 | TE Connectivity | Contact, Tab, 28-30Awg, Crimp; |Te Connectivity 2367819-1 RoHS : Compliant |
| 11,260 | ||
| 2367819-2.. | TE Connectivity | Contact, Tab, 22-28Awg, Crimp; |Te Connectivity 2367819-2.. RoHS : Compliant |
| 6,800 | ||
| 2367818-1 | TE Connectivity | Contact, Socket, 28-30Awg, Crimp; Product Range:Dynamic D-1000 Series; Contact Gender:Socket; Contact Termination Type:Crimp; Wire Size Awg Max:28Awg; Contact Plating:Gold Plated Contacts; Wire Size Awg Min:30Awg Rohs Compliant: Yes RoHS : Compliant |
| 6,150 | ||
| 2367817-2 | TE Connectivity | Contact, Socket, 22-28Awg, Crimp; |Te Connectivity 2367817-2 RoHS : Compliant |
| 6,000 | ||
| 2367817-2 | TE Connectivity | Contact, Socket, 22-28Awg, Crimp; |Te Connectivity 2367817-2 RoHS : Compliant |
| 5,553 | ||
| 2367818-2 | TE Connectivity | Contact, Socket, 22-28Awg, Crimp; Product Range:Dynamic D-1000 Series; Contact Gender:Socket; Contact Termination Type:Crimp; Wire Size Awg Max:22Awg; Contact Plating:Gold Plated Contacts; Wire Size Awg Min:28Awg Rohs Compliant: Yes RoHS : Compliant |
| 4,557 | ||
| 2367818-1 | TE Connectivity | Contact, Socket, 28-30Awg, Crimp; |Te Connectivity 2367818-1 RoHS : Compliant |
| 3,947 | ||
| 4-2213678-5 | TE Connectivity | Cob Led Holder, 13.5X13.5Mm, 3A, 60Vdc; |Te Connectivity 4-2213678-5 RoHS : Compliant |
| 173 | ||
| 3036783 | Phoenix Contact | Isolating Plug, Orange, Terminal Block; |Phoenix Contact 3036783 RoHS : Compliant |
| 125 | ||
| MP013678 | SPC Multicomp | Pwr Conn, 10Mm Skt Anode, 350A/1.5Kvdc; |Multicomp Pro MP013678 RoHS : Compliant |
| 85 | ||
| CT3678 | Cal Test Electronics | Adapter W/Test Clip, Oscilloscope Probe; |Cal Test Electronics CT3678 RoHS : Compliant |
| 1 | ||
| 3678 | Adafruit Industries | Adafruit I2S Stereo Decoder - Uda1334A Breakout |Adafruit 3678 RoHS : Not Compliant |
| 0 | ||
 RS | 1367888 | RS Pro | TERMINAL BLOCK WIRE TO BOARD 2 POSITION 14AWG SCREW WHITE 0.39IN (10MM) |
| 140 | |
| 1367889 | RS Pro | TERMINAL BLOCK WIRE TO BOARD 3 POSITION 14AWG SCREW WHITE 0.39IN (10MM) |
| 100 | ||
| 36783-1201 | Molex | MX120G SEALED MALE HEADER 90 DEG 6+6 WAY RoHS : Compliant |
| 45 | ||
| 2903678 (REL-IR4/LDP- 48DC/4X21) | Phoenix Contact | POWER RELAY, 4PDT, 48VDC/250VAC, 250VDC, 6A, RIFLINE COMPLETE RELAY SERIES |
| 42 | ||
| BT32-F25-0 (43678) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR, MOUNTING KIT, 043678, 43 SHAFT DIA, BT32 SERIES |
| 13 | ||
| 36787.6 (PFSZ | SKL 17-22) | icotek Corporation | EMC SHIELD CLAMPS FOR 10 3 MM BUS BAR, PLUGGABLE, PFSZ/SKL 17-22 |
| 10 | ||
| 36787.152 (PFS2Z | SKL 3-6 (2X STRAIN RELIEF)) | icotek Corporation | EMC SHIELD CLAMPS FOR 10 3 MM BUS BAR, PLUGGABLE, PFS2Z/SKL 3-6 |
| 10 | ||
| 5367819 | RS Pro | SC TO SC SINGLE MODE SIMPLEX FIBER OPTIC ADAPTER GREEN |
| 9 | ||
| 1533678 | RS Pro | ABS ELECTRONIC ENCLOSURE BLACK 7.5 X 4.33 X 2.36IN IP54 -5 TO +80C |
| 3 | ||
| 3273678 | Phoenix Contact | DISTRIBUTION BLOCK;DIN RAIL;6-POSITIONS;32A;600V;10-24 AWG;BLACK, YELLOW RoHS : Compliant |
| 3 | ||
| 3883678 | RS Pro | CYLINDER HONING SET BORE RANGE 24-50MM |
| 2 | ||
| M6-750-1-342-WT (173678) | Brady Worldwide Inc | PERMASLEEVE HEAT-SHRINK LABELS 0.75 IN DIA WT 1 IN RL/100 |
| 2 | ||
| 2453561 (25533678) (HFI806203501NA-025RS) | RS Pro | 5/8-18 X 3 1/2 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, FINE |
| 2 | ||
| 3678 | Adafruit Industries | ADAFRUIT I2S STEREO DECODER - UDA1334A BREAKOUT |
| 0 | ||
| 3678 | 80/20 Inc | 15 S SS ECON T-NUT 5/16-18 THREAD |
| 0 | ||
 Bisco Industries | A367-856 | Seastrom Mfg | 1,302 | |||
| 367-8430-09-503 | MISC. LEDS | 4 | ||||
 Rochester Electronics | LM3678SD-1.2/NOPB | Texas Instruments | IC VOLT REG Programmable Step-Down Buck 1 OUT 800mV, 1.2V 1.5A 10-SON T/R RoHS : Compliant |
| 9,750 | |
| LM3678SD-1.2/NOPB | National Semiconductor Corporation | IC VOLT REG Programmable Step-Down Buck 1 OUT 800mV, 1.2V 1.5A 10-SON T/R RoHS : Compliant |
| 1,839 | ||
| LM3678SDE-1.2/NOPB | National Semiconductor Corporation | IC VOLT REG Programmable Step-Down Buck 1 OUT 800mV, 1.2V 1.5A 10-SON T/R RoHS : Compliant |
| 3,901 | ||
 Sager | CMLPB11-1RLS4-36788-125-V | Sensata Circuit Breakers | Circuit Breakers | 0 | ||
| 3678B | ABB Group | Electrical Enclosure Accessories |
| 0 | ||
| 7-2836789-1 | TE Connectivity | TE Connectivity OCEAN_2.0_Applicator-S-110F200O | 0 | |||
| EG3678-000 | TE Connectivity | Solder Sleeves & Shield Tubing D-200-0233-RT RoHS : Compliant |
| 0 | ||
| SCIHP1367-8R2M | Signal Transformer Inc | Power Inductors - SMD Inductor SMD 8.20uH 16A16.6mohms200KHz | 0 | |||
| ELL1-367/8X10-G | ABB Group | CDT-14 ELL1-36 7/8X10-G |
| 0 | ||
| 2367819-1 | TE Connectivity | Headers & Wire Housings DYNAMIC D1000SL TAB CONT S AU0.2 PLATING RoHS : Compliant |
| 0 | ||
| 2393678-8 | TE Connectivity | EP 2.5 ,HEADER ASSEMBLY, BOSS, 8P RoHS : Compliant |
| 0 | ||
| 0367831207 | Molex | Automotive Connectors 12 CKT MX120G HEADER ASSEMBLY YELLOW RoHS : Compliant |
| 0 | ||
| 3-2213678-3 | TE Connectivity | LED Lighting Mounting Accessories LUMAWISE Z35 LED Hld. For Pan Hd Scws RoHS : Compliant |
| 0 | ||
| 7-2836783-1 | TE Connectivity | TE Connectivity OCEAN_2.0_Applicator-S-075F | 0 | |||
| ELL3/4-3678X612-G | ABB Group | CDT-68 ELL3/4-36 7/8X6 1/2-G |
| 0 | ||
| 3 836 780 | Lumasense Technologies Inc | REPLACEMENT-OPTICAL HEAD FOR IS5-LO/GL |
| 0 | ||
| LMLB1-1RLS4-36789-80-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| 1-2213678-6 | TE Connectivity | Z35 MINI LED HOLDER 13.5*13.5 CSK NO TAP RoHS : Compliant |
| 0 | ||
 TME | 4-2213678-3 | TE Connectivity | Connector: LED holder RoHS : Compliant |
| 17,064 | |
| 2367817-2 | TE Connectivity | Connector: wire-board; socket; female; Inom: 8.6A; for cable RoHS : Compliant |
| 6,000 | ||
| 367-8430-09-808 | Dialight | 367-8430-09-808 |
| 300 | ||
| 2-1423678-9 | TE Connectivity | Circuit breaker |
| 250 | ||
| 2213678-5 | TE Connectivity | Connector: LED holder RoHS : Compliant |
| 49 | ||
| 43678 | Wiha Quality Tools | Screwdriver: precision; Phillips; PH1; Blade length: 60mm; ESD |
| 10 | ||
| 7000-74367-8000100 | Murrelektronik GmbH | Patch cord; Cat 5; RJ45 plug,RJ45 left angled plug; stranded; Cu |
| 0 | ||
| 7000-74367-8002500 | Murrelektronik GmbH | Patch cord; Cat 5; RJ45 plug,RJ45 left angled plug; stranded; Cu |
| 0 | ||
| SKU 23678 | Phoenix Contact | Sensor: movement; 220÷240VAC; IP44; -25÷50°C; 12m; Range: 10s÷10min |
| 0 | ||
| 93.67.8.230 | FINDER SpA | Socket |
| 0 | ||
| 10136787 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 6; THT; 3A; 250V; SL 6 |
| 0 | ||
| 10136788 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 36; SMT; 3A; 100V; 2mm |
| 0 | ||
| 10136786 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 2; THT; 3A; 250V; SL 5 |
| 0 | ||
| 7000-74367-8001500 | Murrelektronik GmbH | Patch cord; Cat 5; RJ45 plug,RJ45 left angled plug; stranded; Cu |
| 0 | ||
| 10053678 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 20; THT; 3A; 250V; SL 2 |
| 0 | ||
 ComSIT USA | A367819 | SEASTROM MANUFACTURING CO INC | AVAILABLE EU | 734 | ||
| 13678 | WELL GROUP PRODUCTS | AVAILABLE EU | 504 | |||
ComSIT USA | T110A105M035AS49367896 | KEMET Corporation | TANTALUM THROUGH HOLE CAPACITOR Tantalum Capacitor, Polarized, Tantalum (dry/solid), 35V, 20% +Tol, 20% -Tol, 1uF, Through Hole Mount RoHS : Not Compliant | 12,245 | ||
 Interstate Connecting Components | 75-107136-78S | Amphenol Aerospace | RECEPT 75-107136-78S | 0 | ||
| CIR02R-36-78SX-F80-VO | ITT Interconnect Solutions | 5015 BAY RECP 12#8 2#16 SKT LC RoHS : Compliant |
| 0 | ||
| 963678-000 | TE Connectivity | 22759/42-22-6 RoHS : Compliant | 0 | |||
| GTC06LC36-78S(A57)(027 | Amphenol Industrial Operations | PLUG | 0 | |||
| GTC070CFZ-3678SZ | Amphenol Industrial Operations | 5015 RECP 12#8&2#16 SKT | 0 | |||
| CIR020R-36-78SY-F80 | ITT Interconnect Solutions | 5015 BAY RECP 12#8 2#16 SKT |
| 0 | ||
| ACS02E36-78S(003) | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| ACS02E36-78S(003) | Amphenol Industrial Operations | Threaded Solder Box Recept OD 5015 Class E |
| 0 | ||
| 10-194236-78S | Amphenol Aerospace | RECEPT 10-194236-78S | 0 | |||
| ACS06AF36-78P(003) | Amphenol Industrial Operations | 0 | ||||
| 75-194236-78S | Amphenol Aerospace | RECEPT 75-194236-78S | 0 | |||
| 88-194236-78S | Amphenol Aerospace | RECEPT 88-194236-78S | 0 | |||
| ACA3107A36-78PB(F80) | Amphenol Industrial Operations | 0 | ||||
| 2336788-1 | TE Connectivity | 5 PD 82 S225 80 C35 | 0 | |||
| CIR020R-36-78PX-F80 | ITT Interconnect Solutions | 5015 BAY RECP 12#8 2#16 PIN |
| 0 | ||
 PEI Genesis | ACS06F36-78SW-025 | Amphenol Corporation |
| 0 | ||
| ACS08A36-78SZ-472 | Amphenol Corporation |
| 0 | |||
| ACS08AF36-78S-025-B30 | Amphenol Corporation |
| 0 | |||
| ACS08AF36-78SZ-025 | Amphenol Corporation |
| 0 | |||
| AIB30U36-78PC | Amphenol Corporation |
| 0 | |||
| ACC00AF36-78SX-025 | Amphenol Corporation |
| 0 | |||
| ACC00F36-78PX-025-LC | Amphenol Corporation |
| 0 | |||
| ACC06AF36-78SZ-025-B30-LC | Amphenol Corporation |
| 0 | |||
| ACC08E36-78RW-025 | Amphenol Corporation |
| 0 | |||
| ACC08E36-78SZ-025-LC | Amphenol Corporation |
| 0 | |||
| ACS00AF36-78SZ-472 | Amphenol Corporation |
| 0 | |||
| ACS00F36-78PX-025-B30 | Amphenol Corporation |
| 0 | |||
| ACS00F36-78PZ-472 | Amphenol Corporation |
| 0 | |||
| ACS01AF36-78P-025 | Amphenol Corporation |
| 0 | |||
| ACS01F36-78SZ-025 | Amphenol Corporation |
| 0 | |||
 Powell Electronics | 4-2213678-3 | TE Connectivity | Lighting Connectors RoHS : Compliant |
| 11,275 | |
| 2367819-1 | TE Connectivity | Connectors RoHS : Compliant |
| 7,920 | ||
| 2367817-2 | TE Connectivity | Connectors RoHS : Compliant |
| 3,960 | ||
| 3-2213678-3 | TE Connectivity | Lighting Connectors RoHS : Compliant |
| 3,245 | ||
| 1-2213678-6 | TE Connectivity | Connectors RoHS : Compliant |
| 494 | ||
| 2-1423678-7 | TE Connectivity | Connectors |
| 132 | ||
| 2-1423678-0 | TE Connectivity | TE COMPONENT (REF 2-1423678-0) RoHS : Compliant |
| 48 | ||
| 1-1423678-9 | TE Connectivity | Relays RoHS : Compliant |
| 33 | ||
| 2-1423678-6 | TE Connectivity | Circuit Breakers |
| 30 | ||
| 71-263678-03P | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 9 | ||
| 71-263678-10S | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 8 | ||
| 71-263678-08P | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 6 | ||
| 71-263678-10P | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 4 | ||
| 75-194236-78P | Amphenol Corporation | CONNECTOR |
| 2 | ||
| 10-523367-8S | Amphenol Corporation | CONNECTOR |
| 1 | ||
 Richardson RFPD | 80367805 | HUBER+SUHNER | Cable Assembly, SMPM-T Threaded Female to SMPM-T T RoHS : Compliant |
| 0 | |
| 02236781 | SEMIKRON | Rectifier Diode 400V 320A 2-Pin Case E-15 RoHS : Compliant | 0 | |||
| 80367803 | HUBER+SUHNER | Microbend 2MTR-5 RoHS : Compliant |
| 0 | ||
| 80367802 | HUBER+SUHNER | Microbend 2MTR-3.5 RoHS : Compliant | 0 | |||
| 80367804 | HUBER+SUHNER | Cable Assembly, SMPM-T Threaded Female to SMPM-T T RoHS : Compliant |
| 0 | ||
 Rutronik | 3-103-678 | Schurter Electronic Components | FPBB FILTER 1PH 2ST U 16A 250VAC/DC RoHS : Compliant |
| 280 | |
 Chip 1 Exchange | 2367818-1 | TE Connectivity | INSTOCK RoHS : Compliant | 59,191 | ||
| 2367820-1 | TE Connectivity | INSTOCK RoHS : Compliant | 47,905 | |||
| 2367819-2 | TE Connectivity | INSTOCK RoHS : Compliant | 46,800 | |||
| 4-2213678-3 | TE Connectivity | INSTOCK RoHS : Compliant | 22,209 | |||
| 3-2213678-4 | TE Connectivity | INSTOCK RoHS : Compliant | 10,777 | |||
| 2213678-5 | TE Connectivity | INSTOCK RoHS : Compliant | 10,556 | |||
| 2213678-4 | TE Connectivity | INSTOCK RoHS : Compliant | 9,045 | |||
| 2213678-3 | TE Connectivity | INSTOCK RoHS : Compliant | 7,347 | |||
| 3-2213678-3 | TE Connectivity | INSTOCK RoHS : Compliant | 6,390 | |||
| 36783-1212 | Molex | INSTOCK | 4,992 | |||
| 2222 036 78109 | INSTOCK | 3,589 | ||||
| 5003678 | INSTOCK | 10 | ||||
 Avnet Abacus | 367831201 | Molex | Conn Shrouded Header 12 POS 35mm Solder RA Through Hole Carton (Alt: 367831201) RoHS : Compliant | 35,712 | ||
| 35236787 | Aptiv PLC | Connector Accessory 50mm to 70mm Recovery Shield Assembly (Alt: 35236787) RoHS : Compliant | 1,540 | |||
| 2367819-1 | TE Connectivity | (Alt: 2367819-1) RoHS : Compliant | 0 | |||
| 2393678-2 | TE Connectivity | EP 25 HEADER ASSEMBLY BOSS 2P (Alt: 2393678-2) RoHS : Compliant | 0 | |||
| 2393678-3 | TE Connectivity | EP 25 HEADER ASSEMBLY BOSS 3P (Alt: 2393678-3) RoHS : Compliant | 0 | |||
| 6367803001 | TE Connectivity | (Alt: 6367803001) RoHS : Compliant | 0 | |||
| 3678453001 | TE Connectivity | (Alt: 3678453001) RoHS : Compliant | 0 | |||
| 3678453001 | TE Connectivity | (Alt: 3678453001) RoHS : Compliant | 0 | |||
| 3-2213678-3 | TE Connectivity | (Alt: 3-2213678-3) RoHS : Compliant | 0 | |||
| 3-2213678-3 | TE Connectivity | (Alt: 3-2213678-3) RoHS : Compliant | 0 | |||
| 1-2213678-6 | TE Connectivity | (Alt: 1-2213678-6) RoHS : Compliant | 0 | |||
| MAL203678229E3 | Vishay Intertechnologies | (Alt: MAL203678229E3) RoHS : Compliant | 0 | |||
| MAL219367829E3 | Vishay Intertechnologies | (Alt: MAL219367829E3) RoHS : Compliant | 0 | |||
| MAL203678477E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor 047uF 63V 20 3000 hours 85C Radial Leaded (Alt: MAL203678477E3) RoHS : Compliant | 0 | |||
| MAL203678228E3 | Vishay Intertechnologies | (Alt: MAL203678228E3) RoHS : Compliant | 0 | |||
Avnet Asia | 0367820142 | Molex | 0W04538 WIRE#12 SLD WHT XX 0.25FLG/0.25 (Alt: 0367820142) RoHS : Compliant | 1,050 | ||
| 0367820150 | Molex | 0W09226WIRE #12SLD WT NEUT BANK3 AP8970 (Alt: 0367820150) RoHS : Compliant | 200 | |||
| 0367820007 | Molex | 0W05169WIRE#12 STRBROWN 100MM FFO/#10RNG (Alt: 0367820007) RoHS : Compliant | 0 | |||
| 0367820133 | Molex | 0W4723 WIRE ASSY BLK TB TO L3 OUTLETS (Alt: 0367820133) RoHS : Compliant | 0 | |||
| 0367820132 | Molex | 0W4720WIRE ASSY BLK NEUT TB TO L2 OUTLET (Alt: 0367820132) RoHS : Compliant | 0 | |||
| 0367820009 | Molex | 0W05171WIRE BLK #18 FOR POW PCB (Alt: 0367820009) RoHS : Compliant | 0 | |||
| 0367820054 | Molex | 0W6685A TWISTCBL ASSY CBCT6 TO MB AP8866 (Alt: 0367820054) RoHS : Compliant | 0 | |||
| 0367820135 | Molex | 0W05837WIRE #12 SLD BK L3 BANK3 (Alt: 0367820135) RoHS : Compliant | 0 | |||
| INN3678C-H605-TL | Power Integrations | AC DC Controller Off-Line CV/CC QR Flyback Switcher Single 85VAC to 265VAC Flyback 17-Pin InSOP-24D (Alt: INN3678C-H605-TL) RoHS : Compliant | 0 | |||
| 0367820118 | Molex | 0W05855WIRE #12 SLD BR B/W L6-20R AP8863 (Alt: 0367820118) RoHS : Compliant | 0 | |||
| 0367820065 | Molex | 0W10070WIRE ASSY BLK FOR AP8886 (Alt: 0367820065) RoHS : Compliant | 0 | |||
| 0367820057 | Molex | 0W07092 CB(L2) TO CTR_BRD(L1)-B (Alt: 0367820057) RoHS : Compliant | 0 | |||
| 0367820183 | Molex | 0W07097 WIRE #12 STR RD 220MM FO/10RNG (Alt: 0367820183) RoHS : Compliant | 0 | |||
| 0367820085 | Molex | 0W05174WIRE #12 STR BLK 60MM FFO/#10 RNG (Alt: 0367820085) RoHS : Compliant | 0 | |||
| INN3678C0253-H606-TL | Power Integrations | (Alt: INN3678C0253-H606-TL) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | ASPI-1367-8R2M-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
 Component Electronics, Inc | 0367800000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 40 | |
| 536783-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 15 | ||
 DB Roberts | 36785 | Avdel | KP-1861 | 0 | ||
| 19-0-36783 | Southco | 0 | ||||
| 493678 | Essentra Components | 0 | ||||
| 20036782 | Essentra Components | 0 | ||||
 EBV Elektronik | INN3678C-H605-TL | Power Integrations | AC DC Controller OffLine CVCC QR Flyback Switcher Single 85VAC to 265VAC Flyback 17Pin InSOP24D (Alt: INN3678C-H605-TL) RoHS : Compliant | 0 | ||
| INN3678C-H606-TL | Power Integrations | AC DC Controller OffLine CVCC QR Flyback Switcher Single 85VAC to 265VAC Flyback 17Pin InSOP24D (Alt: INN3678C-H606-TL) RoHS : Compliant | 0 | |||
 FDH Electronics | MS3367-8-0 | Silver State Wire & Cable | Wire Management | 100 | ||
| PTWY-36-78 | Cinch Connectivity Solutions | Data Bus |
| 11 | ||
| 23A02336-78 | Cooper Interconnect | Backshells & Ac | 0 | |||
| D-436-78 | TE Connectivity | Terminals & Spl RoHS : Compliant | 0 | |||
 Maritex | 2367819-2 | TE Connectivity | Rectangular Connector Contacts; 2367819-2; TE CONNECTIVITY; Gold; 22 AWG; 28 AWG RoHS : Compliant |
| 31,353 | |
| 936784-2 | TE Connectivity | Connectors Accessories; 936784-2; TE CONNECTIVITY; Black; Yes RoHS : Compliant |
| 1,603 | ||
| 936783-2 | TE Connectivity | Rectangular Connector Housings; 936783-2; TE CONNECTIVITY; 20 RoHS : Compliant |
| 771 | ||
| 936780-2 | TE Connectivity | Rectangular Connector Housings; 936780-2; TE CONNECTIVITY; 4; 20; Black; Straight RoHS : Compliant |
| 1 | ||
 Master Electronics | CIRG06-36-78SX-F80-V0 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Female Sockets - 14 Position - Shell Size-Insert 36-78 - Bayonet Lock - Crimp Contacts. RoHS : Not Compliant |
| 0 | |
| CIR020R-36-78P-F80-V0 | ITT Interconnect Solutions | Circular Connector - Receptacle - Male Pins - 14 Position - Shell Size-Insert 36-78 - Bayonet Lock - Crimp Contacts - Panel (Flange) Mount. RoHS : Not Compliant |
| 0 | ||
| CIR02R-36-78SX-F80-VO | ITT Interconnect Solutions | Circular Connector - Receptacle - Female Sockets - 14 Position - Shell Size-Insert 36-78 - Bayonet Lock - Orientation X - Crimp Contacts -Panel Mount. RoHS : Not Compliant |
| 0 | ||
| 963678-000 | TE Connectivity | 22759/42-22-6 MOQ Reduction RoHS : Compliant |
| 0 | ||
| JE-1503-5367-8 | 3M Interconnect | .050 BOARDMOUNT THRU-HOLE RoHS : Compliant |
| 0 | ||
| CIR020R-36-78SY-F80 | ITT Interconnect Solutions | Circular Connector - Receptacle - Female Sockets - 14 Position - Shell Size-Insert 36-78 - Bayonet Lock - Orientation Y - Crimp Contacts -Panel Mount. RoHS : Not Compliant |
| 0 | ||
| 3678B | Thomas & Betts | DuraGard Accessory - 45° Angle Adapter - Cast Brass RoHS : Compliant |
| 0 | ||
| CIRG06-36-78S-F80-V0 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Female Sockets - 14 Position - Shell Size-Insert 36-78 - Bayonet Lock - Crimp Contacts. RoHS : Not Compliant |
| 0 | ||
| EG3678-000 | TE Connectivity | D-200-0233-RT RoHS : Compliant |
| 0 | ||
| FRCIR030-36-78P-F80-V0 | ITT Interconnect Solutions | Veam Cir Vbn Other |Itt Cannon FRCIR030-36-78P-F80-V0 RoHS : Not Compliant |
| 0 | ||
| CIR020R-36-78PX-F80 | ITT Interconnect Solutions | Circular Connector - Receptacle - Male Pins - 14 Position - Shell Size-Insert 36-78 - Bayonet Lock - Orientation X - Crimp Contacts - Panel Mount. RoHS : Not Compliant |
| 0 | ||
| CIR06CFZ-36-78S-F80-VO | ITT Interconnect Solutions | Circular Connector - Straight Plug - Female Sockets - 14 Position - Shell Size-Insert 36-78 - Bayonet Lock - Crimp Contacts. RoHS : Not Compliant |
| 0 | ||
| CIR06CFZGG-36-78S-F80 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Female Sockets - 14 Position - Shell Size-Insert 36-78 - Bayonet Lock - Crimp Contacts. RoHS : Not Compliant |
| 0 | ||
| ELL1-367/8X10-G | Thomas & Betts | CDT-14 ELL1-36 7/8X10-G RoHS : Compliant |
| 0 | ||
| CIR02R-36-78P-F80-V0 | ITT Interconnect Solutions | Circular Connector - Receptacle - Male Pins - 14 Position - Shell Size-Insert 36-78 - Bayonet Lock - Crimp Contacts - Panel (Flange) Mount. RoHS : Not Compliant |
| 0 | ||
 Neutron USA | 3-103-678 | Schurter Electronic Components | Power Line Filters FILTER 1PH 2ST U 16A 250VAC/DC RoHS : Compliant |
| 50 | |
| 13678638 | Aptiv PLC | Connectors CONN MIC/P HVT 12W F ASM BLK SEALED RoHS : Compliant |
| 50 | ||
| 1636780000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks ZDU 2.5 OG RoHS : Compliant |
| 50 | ||
| 0367800000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks JUMPER TERM BLK 2POS SCREW-IN RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE33678-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Male to Straight Cut Lead Cable 24 Inch Length Using RG142 Coax., Radio frequency assembly BNC male to straight cut lead cable 24 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to straight cut lead cable 24 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to straight cut lead cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and straight cut lead cable connection on the other. Our BNC to straight cut lead cable assembly has male gender on end 1 and sexless on end 2. PE33678-24 can also be known as a BNC plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. BNC plug to straight cut lead sexless cable assembly PE33678-24 is built with RG142 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to straight cut lead cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33678-24 RF cable are available on our downloadable PDF datasheet.PE33678-24 can also be used in the other direction and will be straight cut lead sexless to BNC male cable assembly if the opposite connectivity is required. BNC plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to straight cut lead cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements. |
| 5,887 | |
| PE3678 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50. BNC Male to BNC Male Cable Using RG405 Coax. PE3678 is a BNC male to BNC male cable using RG405 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3678 BNC male to BNC male cable assembly is constructed with RG405 coax. | 88 | |||
| PE3678LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50. BNC Male to BNC Male Cable Using RG405 Coax, RoHS. PE3678LF is a BNC male to BNC male cable using RG405 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3678LF BNC male to BNC male cable assembly is constructed with RG405 coax. | 88 | |||
| PE3678LF-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 6 inches. BNC Male to BNC Male Cable 6 Inch Length Using RG405 Coax, RoHS., Radio frequency assembly BNC male to BNC male cable 6 inch length using RG405 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 6 inch length using RG405 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3678LF-6, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3678LF-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 6 inch length using RG405 coax, RoHS. |
| 36 | ||
| PE3678-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 6 inches. BNC Male to BNC Male Cable 6 Inch Length Using RG405 Coax., Radio frequency assembly BNC male to BNC male cable 6 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 6 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3678-6, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3678-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 6 inch length using RG405 coax. |
| 36 | ||
| PE3678-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 12 inches. BNC Male to BNC Male Cable 12 Inch Length Using RG405 Coax., Radio frequency assembly BNC male to BNC male cable 12 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 12 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3678-12, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3678-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 12 inch length using RG405 coax. |
| 18 | ||
| PE3678LF-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 18 inches. BNC Male to BNC Male Cable 18 Inch Length Using RG405 Coax, RoHS., Radio frequency assembly BNC male to BNC male cable 18 inch length using RG405 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 18 inch length using RG405 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3678LF-18, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3678LF-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 18 inch length using RG405 coax, RoHS. |
| 12 | ||
| PE3678LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 36 inches. BNC Male to BNC Male Cable 36 Inch Length Using RG405 Coax, RoHS., Radio frequency assembly BNC male to BNC male cable 36 inch length using RG405 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 36 inch length using RG405 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3678LF-36, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3678LF-36 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 36 inch length using RG405 coax, RoHS. |
| 6 | ||
| PE3678-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 48 inches. BNC Male to BNC Male Cable 48 Inch Length Using RG405 Coax., Radio frequency assembly BNC male to BNC male cable 48 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 48 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3678-48, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3678-48 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 48 inch length using RG405 coax. |
| 4 | ||
| PE3678-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 60 inches. BNC Male to BNC Male Cable 60 Inch Length Using RG405 Coax., Radio frequency assembly BNC male to BNC male cable 60 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 60 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3678-60, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3678-60 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 60 inch length using RG405 coax. |
| 3 | ||
| PE3W03678/PH270 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Thread, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. Reverse Thread SMA Male Right Angle to TNC Male Right Angle Cable Using RG58 Coax with 270 Deg. Clock. PE3W03678/PH270 is a reverse thread SMA male right angle to TNC male right angle cable using RG58 coax. This Pasternack reverse thread SMA male right angle to TNC male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse thread male SMA right angle to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03678/PH270 SMA reverse thread male right angle to TNC male right angle cable assembly is constructed with RG58 coax. | 0 | |||
| PE33678LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. BNC Male to Straight Cut Lead Cable Using RG142 Coax, LF Solder., Radio frequency assembly BNC male to straight cut lead cable using RG142 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to straight cut lead cable using RG142 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and straight cut lead cable connection on the other. Our BNC to straight cut lead cable assemblies have a male gender on end 1 and sexless on end 2. This BNC to straight cut lead cable is a male to sexless coax assembly, PE33678LF, can also be known as a BNC plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. BNC plug to straight cut lead sexless cable assembly PE33678LF is built with RG142 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to straight cut lead cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC male to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33678LF can also be used in the other direction and will be straight cut lead sexless to BNC male cable assembly if the opposite connectivity is required. BNC plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to straight cut lead cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to straight cut lead cable using RG142 coax, LF solder. | 0 | |||
| PE3C3678 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50. N Male to N Male Right Angle Cable Using LMR-240 Coax. PE3C3678 is a N type male to N type male right angle cable using LMR-240 coax. This Pasternack type N male to type N male right angle cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm N type for connector 2. type N to type N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male type N to male type N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3678 N type male to N type male right angle cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE36780/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Plug to Reverse Polarity TNC Plug Cable Using RG316 Coax with HeatShrink., Radio frequency assembly reverse polarity TNC plug to reverse polarity TNC plug cable using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity TNC plug to reverse polarity TNC plug cable using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC cable connection on one end and reverse polarity TNC cable connection on the other. Our reverse polarity TNC to reverse polarity TNC cable assembly has plug gender on end 1 and plug on end 2. PE36780/HS can also be known as a reverse polarity TNC male to reverse polarity TNC male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. Reverse polarity TNC male to reverse polarity TNC male cable assembly PE36780/HS is built with RG316 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE36780/HS RF cable are available on our downloadable PDF datasheet. TNC reverse polarity male to TNC reverse polarity male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC RF cable assembly as per your requirements. | 0 | |||
| PE36784/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMC Jack Bulkhead to MCX Plug Cable Using RG316 Coax with HeatShrink., Radio frequency assembly SMC jack bulkhead to MCX plug cable using RG316 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC jack bulkhead to MCX plug cable using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC bulkhead cable connection on one end and MCX cable connection on the other. Our SMC to MCX cable assemblies have a jack gender on end 1 and plug on end 2. This SMC to MCX cable is a jack to plug coax assembly, PE36784/HS, can also be known as a SMC female to MCX male cable assembly and will be shipped same-day as it is purchased. SMC female to MCX male cable assembly PE36784/HS is built with RG316 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMC jack bulkhead to MCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36784/HS can also be used in the other direction and will be MCX plug to SMC jack bulkhead cable assembly if the opposite connectivity is required. SMC female bulkhead to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to MCX cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC jack bulkhead to MCX plug cable using RG316 coax with heatshrink. | 0 | |||
 TE Connectivity | 2367819-1 | TE Connectivity | DYNAMIC D1000SL TAB CONT S AU0.2 PLATING Contact Mating Area Plating Material: Gold (Au) Contact Type: Tab Wire Size: 30 – 28 AWG Wire Size: .05 – .1 mm² Product Terminates To: Wire & Cable Gold (Au) Tab 30 – 28 AWG .05 – .1 mm² | Dynamic D1000 Slim Contact | Part Number: 2367819-1 | Internal Number: 2367819-1 | TE Connectivity RoHS : Compliant |
| 28,296 | |
| 2213678-3 | TE Connectivity | Z35 MINI LED HOLDER 12*15MM PANHEAD Lighting Connector Features Included: Zhaga Inspired Not Optic Compatible Operating Voltage: 60 VDC Termination Method to Wire & Cable: Poke-In Connector System: Wire-to-Component Number of Positions: 2 Zhaga Inspired 60 VDC Poke-In | Lumawise Led Holder | Part Number: 2213678-3 | Internal Number: 2213678-3 | TE Connectivity RoHS : Compliant |
| 5,455 | ||
| 3-2213678-4 | TE Connectivity | Z35 MINI LED HOLDER 12*15MM COUNTERSUNC Lighting Connector Features Included: Zhaga Inspired Not Optic Compatible Operating Voltage: 60 VDC Termination Method to Wire & Cable: Poke-In Connector System: Wire-to-Board Number of Positions: 1 Zhaga Inspired 60 VDC Poke-In | Lumawise Led Holder | Part Number: 3-2213678-4 | Internal Number: 3-2213678-4 | TE Connectivity RoHS : Compliant |
| 1,411 | ||
| 2213678-6 | TE Connectivity | Z35 MINI LED HOLDER 13.5*13.5MM CSK Lighting Connector Features Included: Zhaga Inspired Not Optic Compatible No Thermal Protection Operating Voltage: 60 VDC Termination Method to Wire & Cable: Poke-In Connector System: Wire-to-Component Number of Positions: 2 Zhaga Inspired 60 VDC | Lumawise Led Holder | Part Number: 2213678-6 | Internal Number: 2213678-6 | TE Connectivity RoHS : Compliant |
| 766 | ||
| 936782-2 | TE Connectivity | MT-II/JPT SLD 20P PLUG COVER Number of Positions: 20 Primary Product Color: Black Protection & Strain Relief Accessory Type: Cover Primary Product Material: PA 66 Cable Exit Angle: 180 ° Automotive Connector Cap & Cover | 20 Black Cover PA 66 | Part Number: 936782-2 | Internal Number: 936782-2 | TE Connectivity RoHS : Compliant |
| 478 | ||
 Vyrian | LM3678SD-1.2 | Texas Instruments | Switching Regulator, Voltage-mode, 2.4A, 3600kHz Switching Freq-Max | 9,776 | ||
| LM3678SDE-1.2 | Texas Instruments | Switching Regulator, Voltage-mode, 2.4A, 3600kHz Switching Freq-Max | 9,708 | |||
| D36780ZGU100 | Texas Instruments | 8,962 | ||||
| D36780PGE100 | Texas Instruments | 8,738 | ||||
DS3678J | Texas Instruments | Multiplexer | 8,058 | |||
| LM3678SD-1-2-NOPB | Texas Instruments | 8,015 | ||||
| LM3678SDE-1-2-NOPB | Texas Instruments | 6,829 | ||||
| 1736780 | Phoenix Contact | Barrier Strip Terminal Block, 20A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,512 | |||
| LM3678SD-1-2EV | Texas Instruments | 6,041 | ||||
| DS3678N | Texas Instruments | Multiplexer | 4,456 | |||
| TPS62843678EVM-167 | Texas Instruments | 4,429 | ||||
| LM3678SDX-1.2 | Texas Instruments | Switching Regulator, Voltage-mode, 2.4A, 3600kHz Switching Freq-Max | 4,061 | |||
| LM3678SDX-1-2-NOPB | Texas Instruments | 3,080 | ||||
| CT363678 | Micron Technology, Inc | 2,668 | ||||
| 1436783 | Phoenix Contact | Circular Connector RoHS : Compliant | 675 | |||
 Win Source Electronics | TPS53678RSLT | Texas Instruments |
| 22,910 | ||
| TPS53678RSLR | Texas Instruments | Dual CHANNEL(4-PGASE+1-PHASE) D-cap+ Ste |
| 22,220 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand