| Electronic Components Datasheet Search |
|
33702 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Verical | 3370233 | Bossard Group | 3370233 |
| 8,300 | |
![]() Avnet Americas | 63443-3702 | Molex | STRIKER SCREW - Bulk (Alt: 0634433702) RoHS : Compliant |
| 0 | |
| 7100133702 | 3M Interconnect | EXL PRO UNITIZED WHEEL, EX-UW, 8A COARSE - Bulk (Alt: 7100133702) RoHS : Not Compliant |
| 0 | ||
| 1-993370-2 | TE Connectivity | CYLINDER,AIR,DOUBLE ACTING,STANDARD,PROX - Bulk (Alt: 1-993370-2) RoHS : Not Compliant |
| 0 | ||
| 1633702-1 | TE Connectivity | - Bulk (Alt: 1633702-1) RoHS : Not Compliant | 0 | |||
| 151063-3702 | Molex | Pin Header, 2 Contacts, 1 Row, 2mm, Gold, 2.5A, Straight, Shrouded, Copper Alloy, Wire-to-Board, THT - Bulk (Alt: 1510633702) RoHS : Compliant |
| 0 | ||
| 1-2823370-2 | TE Connectivity | - Tape and Reel (Alt: 1-2823370-2) RoHS : Compliant |
| 0 | ||
| 87833-7020 | Molex | Pin Header, 24 Contacts, 2 Rows, 2mm, Gold, 2A, Right Angle, Shrouded, Phosphor Bronze, THT RA - Tape and Reel (Alt: 0878337020) RoHS : Compliant |
| 0 | ||
| HDR-213337-02-FQSFPDD | Samtec Inc | - Bulk (Alt: HDR-213337-02-FQSFPDD) RoHS : Compliant | 0 | |||
| ESQT-122-02-F-D-337-028 | Samtec Inc | - Bulk (Alt: ESQT-122-02-F-D-337-028) RoHS : Compliant | 0 | |||
| A15337-02 | Qnity Laird | Tflex 3170, 18x18in - Bulk (Alt: A15337-02) RoHS : Compliant |
| 0 | ||
| 533702B02552G | Boyd Corporation | Heat Sink Passive TO-220 Radial Clip 5.7?C/W Black Anodized - Bulk (Alt: 533702B02552G) RoHS : Compliant | 0 | |||
| 533702B02552G | Boyd Corporation | Heat Sink Passive TO-220 Radial Clip 5.7?C/W Black Anodized - Bulk (Alt: 041778) RoHS : Compliant |
| 0 | ||
| 2-2823370-2 | TE Connectivity | - Tape and Reel (Alt: 2-2823370-2) RoHS : Not Compliant |
| 0 | ||
| 204223-3702 | Molex | SQUBA 1.8 PLUG ASSY-CLIP SLOT & KEY G - Bulk (Alt: 2042233702) RoHS : Compliant |
| 0 | ||
| 3-2823370-2 | TE Connectivity | - Tape and Reel (Alt: 3-2823370-2) RoHS : Not Compliant |
| 0 | ||
![]() Mouser Electronics | 337-024-559-804 | EDAC Inc | Standard Card Edge Connectors Card Edge Connector RoHS : Compliant |
| 31 | |
| 337-024-500-202 | EDAC Inc | Standard Card Edge Connectors GRN CRD EDGE .156X.2 PCB DEPTH .350 RoHS : Compliant |
| 17 | ||
| 337-020-558-812 | EDAC Inc | Standard Card Edge Connectors Card Edge Connector RoHS : Compliant |
| 16 | ||
| 337-020-540-201 | EDAC Inc | Standard Card Edge Connectors GRN CRD EDGE .156X.2 PCB DEPTH .350 RoHS : Compliant |
| 3 | ||
| TANGO17/3M/SMAM/S/S/26 | Siretta Ltd | Antennas 5G/4G WEATHER RESISTANT PANEL MOUNT ANTENNA SMA MALE 3M RG174 CABLE |
| 0 | ||
| 337-027-559-608 | EDAC Inc | Standard Card Edge Connectors Card Edge Connector RoHS : Compliant |
| 0 | ||
| 337-023-520-604 | EDAC Inc | Standard Card Edge Connectors Card Edge Connector RoHS : Compliant |
| 0 | ||
| 337-020-558-212 | EDAC Inc | Standard Card Edge Connectors Card Edge Connector RoHS : Compliant |
| 0 | ||
| 337-026-559-607 | EDAC Inc | Standard Card Edge Connectors Card Edge Connector RoHS : Compliant |
| 0 | ||
| 337-026-521-258 | EDAC Inc | Standard Card Edge Connectors Card Edge Connector RoHS : Compliant |
| 0 | ||
| 337-026-541-858 | EDAC Inc | Standard Card Edge Connectors Card Edge Connector RoHS : Compliant |
| 0 | ||
| 337-020-500-201 | EDAC Inc | Standard Card Edge Connectors GRN CRD EDGE .156X.2 PCB DEPTH .350 RoHS : Compliant |
| 0 | ||
| 337-023-540-602 | EDAC Inc | Standard Card Edge Connectors Card Edge Connector RoHS : Compliant |
| 0 | ||
| 337-023-542-104 | EDAC Inc | Standard Card Edge Connectors Card Edge Connector RoHS : Compliant |
| 0 | ||
| 337-023-540-102 | EDAC Inc | Standard Card Edge Connectors Card Edge Connector RoHS : Compliant |
| 0 | ||
![]() Newark | 533702B02552G | Boyd Corporation | Heat Sink; Thermal Resistance:5.7°C/W; Packages Cooled:To-220; External Width - Metric:41.9Mm; External Height - Metric:25.4Mm; External Length - Metric:25.4Mm; External Diameter - Metric:-; Heat Sink Material:Aluminum; Colour:Black Rohs Compliant: Yes RoHS : Compliant |
| 34 | |
| 99.337.0220.0 | Wieland Electric GmbH | Pcb Pin Header 8113 S/ 3 Ob |Wieland Electric 99.337.0220.0 RoHS : Not Compliant |
| 0 | ||
| 337-020-540-102 | EDAC Inc | Conn, Card Edge, Single Side, 20 Pos; |Edac 337-020-540-102 RoHS : Compliant |
| 0 | ||
| 337-020-540-878 | EDAC Inc | Conn Card Edge Dual Side 20 Pos 1.57Mm; |Edac 337-020-540-878 RoHS : Compliant |
| 0 | ||
| 337-020-541-804 | EDAC Inc | Conn Card Edge Dual Side 20 Pos 1.57Mm; |Edac 337-020-541-804 RoHS : Compliant |
| 0 | ||
| 337-022-541-604 | EDAC Inc | Conn, Card Edge, Single Side, 22 Pos; |Edac 337-022-541-604 RoHS : Compliant |
| 0 | ||
| 337-024-520-201 | EDAC Inc | Conn Card Edge Dual Side 24 Pos 1.57Mm; |Edac 337-024-520-201 RoHS : Compliant |
| 0 | ||
| 337-024-520-607 | EDAC Inc | Conn, Card Edge, Single Side, 24 Pos; |Edac 337-024-520-607 RoHS : Compliant |
| 0 | ||
| 337-024-523-668 | EDAC Inc | Conn, Card Edge, Single Side, 24 Pos; |Edac 337-024-523-668 RoHS : Compliant |
| 0 | ||
| 337-024-542-207 | EDAC Inc | Conn Card Edge Dual Side 24 Pos 1.57Mm; |Edac 337-024-542-207 RoHS : Compliant |
| 0 | ||
| 337-025-542-112 | EDAC Inc | Conn, Card Edge, Single Side, 25 Pos; |Edac 337-025-542-112 RoHS : Compliant |
| 0 | ||
| 337-026-500-212 | EDAC Inc | Conn Card Edge Dual Side 26 Pos 1.57Mm; |Edac 337-026-500-212 RoHS : Compliant |
| 0 | ||
| 337-026-524-108 | EDAC Inc | Conn, Card Edge, Single Side, 26 Pos; |Edac 337-026-524-108 RoHS : Compliant |
| 0 | ||
| 337-026-555-807 | EDAC Inc | Conn Card Edge Dual Side 26 Pos 1.57Mm; |Edac 337-026-555-807 RoHS : Compliant |
| 0 | ||
| 337-027-520-602 | EDAC Inc | Conn, Card Edge, Single Side, 27 Pos; |Edac 337-027-520-602 RoHS : Compliant |
| 0 | ||
![]() RS | 1533702 | RS Pro | ENCLOSURE CASE WHITE ABS 170MM X 85.5MM X 35.5MM |
| 3 | |
| 2453569 (25533702) (HFI807503501NA-025RS) | RS Pro | 3/4-16 X 3 1/2 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, FINE |
| 2 | ||
| E33702 | ifm efector inc | PROCESS ADAPTER; SENSOR CONNECTION G1 ASEPTOFLEX VARIO;TRI-CLAMP DN50 (2") |
| 1 | ||
| 2453370 (25533000) (HCI805000871-050RS) | RS Pro | 1/2-13 X 7/8 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, COARSE |
| 1 | ||
| 33702 | ELESA USA | MA.25-ISO 3287-P2, LABELS WITH MARKS AND SYMBOLS, LABELS WITH MARKS AND SYMBOLS |
| 0 | ||
| 33702 | Wiha Quality Tools | Extension Bar, 3/8-Inch Drive, 5-Inch |
| 0 | ||
| 33702 | Streamlight Inc | 3C LUX DIV 1 WITH WHITE LED WITHOUT ALKALINE BATTERIES. CLAM PACKAGED.BLACK |
| 0 | ||
| 337020 | Burkert Fluid Control Systems | CONTROL VALVE, 8802-GD-I-A-50,0SS-VA-FD27-N-0-E-F-L-0-0 |
| 0 | ||
| 337024 | Burkert Fluid Control Systems | SOLENOID VALVE, 6027-I03,0FFVAGM82-K-024/DC-16 *, 6027 SERIES |
| 0 | ||
| 83370/25 | Olympic Wire & Cable Corp | ENDURO CABLE, OUTDOOR/DIRECT BURIAL, PVC INSULAT, 16AWG STRAND (19X29), 25 COND |
| 0 | ||
| 63443-3702 | Molex | STRIKER SCREW |
| 0 | ||
| 66253370274 | Norton Winter | 7 x 1/8 x 5/8-11In. GeMini XXL Grinding/Cutting Wheel A 30 V T27 |
| 0 | ||
| 66253370275 | Norton Winter | 9 x 1/8 x 5/8-11In. GeMini XXL Grinding/Cutting Wheel A 30 V T27 |
| 0 | ||
| 4033702 (40337-02) | Siemens | TALON MQ7 STL RINGLESS 2.5 IN HUB NO GR ; 40337-02 |
| 0 | ||
| 7100133702 (00076308132125) | 3M | ScotchBrite EXL PRO Unitized Wheel, EXUW, 8A Coarse, 3 in x 3.5 mm x 3/8 in |
| 0 | ||
![]() Bisco Industries | 180-7337-02-05-00 | Cambion Electronics Ltd | RoHS : Not Compliant | 7,144 | ||
![]() Onlinecomponents.com | 33702 | Brady Worldwide Inc | SCN61-2 RoHS : Compliant |
| 0 | |
| LEGF6-1REC4R-33702-4-V | Sensata Circuit Breakers | Cir Brkr Hyd Mag Circuit Breaker RoHS : Compliant |
| 0 | ||
| IEGF6-1REC4R-33702-1-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| IEGF6-1REC4R-33702-3-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | BC337-025G![]() | onsemi | NPN Bipolar Transistor RoHS : Compliant |
| 52,165 | |
![]() Sager | 468-33702-001 | Carling Technologies | Switch Actuators | 0 | ||
| 0395337020 | Molex | Pluggable Terminal Blocks 5.08MM EURO PLUG VERT RWE GRN 20CKT |
| 0 | ||
| LEGF6-1REC4R-33702-2-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 51-337.025K | EAO AG | EAO | 0 | |||
| 1-993370-2 | TE Connectivity | TE Connectivity CYLINDER,AIR,DOUBLE ACTING,STANDARD,PROX |
| 0 | ||
| 1337021 | Phoenix Contact | Board to Board & Mezzanine Connectors FR 1,27/100-FH |
| 0 | ||
| 060-T337-02-01 | HONEYWELL TEST AND MEASUREMENT | NDW2BN,1AK,2AN,5F,6R,7BA:MODEL FP5000, |
| 0 | ||
| 0395337024 | Molex | Pluggable Terminal Blocks 5.08MM EURO PLUG VERT RWE GRN 24CKT | 0 | |||
| 1633702-1 | TE Connectivity | Crimpers / Crimping Tools CRIMPER, INS O .062 | 0 | |||
| 219-3-37024-1 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| 51-337.025D361 | EAO AG | EAO | 0 | |||
| 1-2823370-2 | TE Connectivity | Headers & Wire Housings 12P,2MM,SHRD HDR,DRVT,SMD,0.76AU,TRW/CAP RoHS : Compliant |
| 0 | ||
| 0395337022 | Molex | Pluggable Terminal Blocks 5.08MM EURO PLUG VERT RWE GRN 22CKT | 0 | |||
| 3033702 | Phoenix Contact | Terminal Block Tools & Accessories FBSR 2-5 RoHS : Compliant |
| 0 | ||
| LEGF6-1REC4R-33702-4-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag | 0 | |||
![]() TME | 1337024-1 | TE Connectivity | Connector: wire-wire; PIN: 2; straight; crimped; natural; nylon |
| 28,633 | |
| 3370233 | Bossard Group | Screw; M3; M3x10; 0.5; Head: cheese head; slotted,Torx®; TX10,0.8mm |
| 8,300 | ||
| 3337021 | Bossard Group | Screw; for wood; 5x55; Head: countersunk; Torx®; TX20; WIROX®; SPAX® |
| 500 | ||
| 3337027 | Bossard Group | Screw; for wood; 5x90; Head: countersunk; Torx®; TX20; WIROX®; SPAX® |
| 200 | ||
| 3033702 | Phoenix Contact | Comb bridge; red; ways: 2 RoHS : Compliant |
| 105 | ||
| 533702B02552G | Boyd Corporation | Heatsink: extruded; H; TO220; black; L: 25.4mm; W: 41.91mm; H: 25.4mm RoHS : Compliant |
| 0 | ||
| 09 0337 02 16 | Binder UK Ltd | Connector: M16; plug; male; PIN: 16; 3A; 32V; 680; soldering; straight |
| 0 | ||
| 3337022 | Bossard Group | Screw; for wood; 5x60; Head: countersunk; Torx®; TX20; WIROX®; SPAX® |
| 0 | ||
| 51-337.025D2F | EAO AG | Switch: rotary with key; 22mm; Stabl.pos: 2; NC x3 + NO x3; flat RoHS : Compliant |
| 0 | ||
| 3337026 | Bossard Group | Screw; for wood; 5x80; Head: countersunk; Torx®; TX20; WIROX®; SPAX® |
| 0 | ||
![]() Interstate Connecting Components | 180-7337-02-05-00 | Cambion Electronics Ltd | RoHS : Not Compliant |
| 2,751 | |
| 180-7337-02-05 | MISC MIL-AERO | UNCODED | 9 | |||
| 1-993370-2 | TE Connectivity | CYLINDER,AIR,DOUBLE ACTING,STA |
| 0 | ||
| 1-2823370-2 | TE Connectivity | 12P,2MM,SHRD HDR,DRVT,SMD,0.76 RoHS : Compliant |
| 0 | ||
| 2-2823370-2 | TE Connectivity | 22P,2MM,SHRD HDR,DRVT,SMD,0.76 RoHS : Compliant | 0 | |||
| 1337027-1 | TE Connectivity | EPB LID MOULDING | 0 | |||
| 3-2823370-2 | TE Connectivity | 32P,2MM,SHRD HDR,DRVT,SMD,0.76 RoHS : Compliant | 0 | |||
![]() Powell Electronics | 1337024-1 | TE Connectivity | Connectors |
| 18,898 | |
| 88-528337-02S | Amphenol Corporation | RECEPT |
| 3 | ||
| 10-523370-27P | Amphenol Corporation | CONNECTOR |
| 3 | ||
![]() Chip 1 Exchange | 1337024-1 | TE Connectivity | INSTOCK | 37,440 | ||
![]() Avnet Abacus | 1337020 | Phoenix Contact | Conn Stacking Receptacle 80 POS 127mm Solder RA SMD (Alt: 1337020) RoHS : Compliant | 1,120 | ||
| 1337021 | Phoenix Contact | FR 127100FH FR127100FH (Alt: 1337021) RoHS : Compliant | 0 | |||
| 33370237 | Aptiv PLC | ASM CONN 40 M DCS2 28 TTS 15 SLD 33370237 (Alt: 33370237) RoHS : Compliant | 0 | |||
| 1633702-1 | TE Connectivity | (Alt: 1633702-1) RoHS : Not Compliant | 0 | |||
| 1337024-1 | TE Connectivity | Conn Housing (Alt: 1337024-1) RoHS : Compliant | 0 | |||
| 878337020 | Molex | - Tape and Reel (Alt: 878337020) RoHS : Compliant | 0 | |||
| 878337020 | Molex | - Tape and Reel (Alt: 878337020) RoHS : Compliant | 0 | |||
| 533702B02552G | Boyd Corporation | Heat Sink Passive TO220 Radial Clip 57CW Black Anodized (Alt: 041778) RoHS : Compliant | 0 | |||
![]() Master Electronics | 3033702 | Phoenix Contact | Plug-in bridge - pitch: 5.2 mm - number of positions: 2 - color: red RoHS : Compliant |
| 79 | |
| 503370-2600 | Molex | Molex 503370-2600 2.5 FLOATING Connector Plug AD RoHS : Compliant |
| 0 | ||
| 1-993370-2 | TE Connectivity | CYLINDER AIR DOUBLE ACTING STANDARD PROX RoHS : Compliant |
| 0 | ||
| 1337021 | Phoenix Contact | FR 1 27/100-FH RoHS : Compliant |
| 0 | ||
| 060-T337-02-01 | Honeywell Sensing and Control | NDW2BN 1AK 2AN 5F 6R 7BA:M RoHS : Compliant |
| 0 | ||
| 1633702-1 | TE Connectivity | CRIMPER INSULATION O .062 RoHS : Not Compliant |
| 0 | ||
| 1337024-1 | TE Connectivity | Conn Housing PL 2 POS 6.35mm Crimp ST Cable Mount RoHS : Compliant |
| 0 | ||
| 219-3-37024-1 | Sensata Circuit Breakers | Hydraulic Magnetic Circuit Breaker 3 Pole 209 Series | Sensata - Airpax 219-3-37024-1 RoHS : Compliant |
| 0 | ||
| 1-2823370-2 | TE Connectivity | 12P 2MM SHRD HDR DRVT SMD 0.76AU TRW/CAP MOQ Reduction RoHS : Compliant |
| 0 | ||
| LEGF6-1REC4R-33702-4-V | Sensata Circuit Breakers | Cir Brkr Hyd Mag Circuit Breaker RoHS : Compliant |
| 0 | ||
| IEGF6-1REC4R-33702-3-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| ESQT-122-02-F-D-337-028 | Samtec Inc | 2.00 mm FleXYZ™ Flexible Elevated Socket Strip RoHS : Compliant |
| 0 | ||
| 2000033702 | OMRON Industrial Automation | PS HH WM 90-264 VAC 5V 1. RoHS : Compliant |
| 0 | ||
| 2-2823370-2 | TE Connectivity | 22P 2MM SHRD HDR DRVT SMD 0.76AU TRW/CAP MOQ Reduction RoHS : Compliant |
| 0 | ||
| IEGF6-1REC4R-33702-1-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE33370-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length: 24 inches. HN Male to HN Male Cable 24 Inch Length Using RG217 Coax., Radio frequency assembly HN male to HN male cable 24 inch length using RG217 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. HN male to HN male cable 24 inch length using RG217 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and HN cable connection on the other. Our HN to HN cable assemblies have a male gender on end 1 and male on end 2. This HN to HN cable is a male to male coax assembly, PE33370-24, can also be known as a HN plug to HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE33370-24 is built with RG217 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5 GHz maximum frequency HN male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. HN plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to HN male cable 24 inch length using RG217 coax. |
| 125 | |
| PE33702LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to HN Male Cable Using RG214 Coax, LF Solder. PE33702LF is a 7/16 DIN male to HN male cable using RG214 coax. This Pasternack 7/16 DIN male to HN male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm HN for connector 2. Our male 7/16 DIN to male HN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33702LF 7/16 DIN male to HN male cable assembly is constructed with RG214 coax. | 0 | |||
| PE33702 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to HN Male Cable Using RG214 Coax., Radio frequency assembly 7/16 DIN male to HN male cable using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to HN male cable using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 7/16 DIN cable connection on one end and a HN cable connection on the other. Our 7/16 DIN to HN cable assembly has a male gender on end 1 and a male on end 2. PE33702 can also be known as a 7/16 DIN plug to HN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE33702 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -20 to 80 degrees C. The flexible RF cable has a between series connection. Our 7/16 DIN male to HN male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to HN plug cable assembly PE33702 is built with RG214 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to HN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE33702 can also be used in the other direction and will be a HN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to HN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to HN cable assembly for quick shipment worldwide. Variations of 7/16 DIN and HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to HN RF cable assembly as per your requirements. | 0 | |||
| PE3370-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length: 24 inches. BNC Male Right Angle to BNC Male Right Angle Cable 24 Inch Length Using RG214 Coax., Radio frequency assembly BNC male right angle to BNC male right angle cable 24 inch length using RG214 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male right angle to BNC male right angle cable 24 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and right angle BNC cable connection on the other. Our right angle BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3370-24, can also be known as a right angle BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3370-24 is built with RG214 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC right angle male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to BNC male right angle cable 24 inch length using RG214 coax. |
| 0 | ||
| PE33702-108 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to HN Male Cable 108 Inch Length Using RG214 Coax., Radio frequency assembly 7/16 DIN male to HN male cable 108 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to HN male cable 108 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 7/16 DIN cable connection on one end and a HN cable connection on the other. Our 7/16 DIN to HN cable assembly has a male gender on end 1 and a male on end 2. PE33702-108 can also be known as a 7/16 DIN plug to HN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE33702-108 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -20 to 80 degrees C. The flexible RF cable has a between series connection. Our 7/16 DIN male to HN male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to HN plug cable assembly PE33702-108 is built with RG214 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to HN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE33702-108 can also be used in the other direction and will be a HN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to HN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to HN cable assembly for quick shipment worldwide. Variations of 7/16 DIN and HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to HN RF cable assembly as per your requirements. |
| 0 | ||
| PE33702-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to HN Male Cable 12 Inch Length Using RG214 Coax., Radio frequency assembly 7/16 DIN male to HN male cable 12 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to HN male cable 12 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 7/16 DIN cable connection on one end and a HN cable connection on the other. Our 7/16 DIN to HN cable assembly has a male gender on end 1 and a male on end 2. PE33702-12 can also be known as a 7/16 DIN plug to HN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE33702-12 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -20 to 80 degrees C. The flexible RF cable has a between series connection. Our 7/16 DIN male to HN male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to HN plug cable assembly PE33702-12 is built with RG214 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to HN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE33702-12 can also be used in the other direction and will be a HN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to HN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to HN cable assembly for quick shipment worldwide. Variations of 7/16 DIN and HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to HN RF cable assembly as per your requirements. |
| 0 | ||
| PE33702-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to HN Male Cable 36 Inch Length Using RG214 Coax., Radio frequency assembly 7/16 DIN male to HN male cable 36 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to HN male cable 36 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 7/16 DIN cable connection on one end and a HN cable connection on the other. Our 7/16 DIN to HN cable assembly has a male gender on end 1 and a male on end 2. PE33702-36 can also be known as a 7/16 DIN plug to HN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE33702-36 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -20 to 80 degrees C. The flexible RF cable has a between series connection. Our 7/16 DIN male to HN male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to HN plug cable assembly PE33702-36 is built with RG214 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to HN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE33702-36 can also be used in the other direction and will be a HN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to HN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to HN cable assembly for quick shipment worldwide. Variations of 7/16 DIN and HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to HN RF cable assembly as per your requirements. |
| 0 | ||
| PE33702-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to HN Male Cable 48 Inch Length Using RG214 Coax., Radio frequency assembly 7/16 DIN male to HN male cable 48 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to HN male cable 48 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 7/16 DIN cable connection on one end and a HN cable connection on the other. Our 7/16 DIN to HN cable assembly has a male gender on end 1 and a male on end 2. PE33702-48 can also be known as a 7/16 DIN plug to HN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE33702-48 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -20 to 80 degrees C. The flexible RF cable has a between series connection. Our 7/16 DIN male to HN male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to HN plug cable assembly PE33702-48 is built with RG214 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to HN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE33702-48 can also be used in the other direction and will be a HN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to HN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to HN cable assembly for quick shipment worldwide. Variations of 7/16 DIN and HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to HN RF cable assembly as per your requirements. |
| 0 | ||
| PE33702-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to HN Male Cable 72 Inch Length Using RG214 Coax., Radio frequency assembly 7/16 DIN male to HN male cable 72 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to HN male cable 72 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 7/16 DIN cable connection on one end and a HN cable connection on the other. Our 7/16 DIN to HN cable assembly has a male gender on end 1 and a male on end 2. PE33702-72 can also be known as a 7/16 DIN plug to HN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE33702-72 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -20 to 80 degrees C. The flexible RF cable has a between series connection. Our 7/16 DIN male to HN male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to HN plug cable assembly PE33702-72 is built with RG214 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to HN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE33702-72 can also be used in the other direction and will be a HN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to HN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to HN cable assembly for quick shipment worldwide. Variations of 7/16 DIN and HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to HN RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3370-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to Mini SMP Female Cable 24 Inch Length Using PE-P086 Coax., Radio frequency assembly SMA male right angle to mini SMP female cable 24 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to mini SMP female cable 24 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to mini SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and a mini SMP cable connection on the other. Our right angle SMA to mini SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C3370-24 can also be known as a right angle SMA plug to mini SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.52-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3370-24 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Our right angle SMA male to Mini SMP female cable has a maximum VSWR of 1.4:1. SMA plug to mini SMP jack cable assembly PE3C3370-24 is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to mini SMP cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with gold over nickel plating, while the other has the solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C3370-24 can also be used in the other direction and will be a mini SMP female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to mini SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to mini SMP cable assembly for quick shipment worldwide. Variations of SMA and mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Mini SMP RF cable assembly as per your requirements. |
| 0 | ||
![]() Teledyne HiRel | M38510/33702BFA![]() | Teledyne HiRel | DECODER, DUAL 2-TO-4-LINE RoHS : Not Compliant | 0 | ||
M38510/33702B2A![]() | Teledyne HiRel | DECODER, DUAL 2-TO-4-LINE RoHS : Not Compliant | 0 | |||
M38510/33702BEA![]() | Teledyne HiRel | DECODER, DUAL 2-TO-4-LINE RoHS : Not Compliant | 0 | |||
![]() Vyrian | 337-022-520-102 | EDAC Inc | Card Edge Connector, 22 Contact(s), 1 Row(s), Female, Straight, 0.156 inch Pitch, Solder Terminal, Hole 0.128, Green Insulator RoHS : Compliant | 17,554 | ||
| 337-022-523-202 | EDAC Inc | Card Edge Connector, 22 Contact(s), 2 Row(s), Female, Straight, 0.156 inch Pitch, Solder Terminal, Hole 0.128, Green Insulator RoHS : Compliant | 17,146 | |||
| 337-029-520-608 | EDAC Inc | Card Edge Connector, 29 Contact(s), 1 Row(s), Female, Straight, 0.156 inch Pitch, Solder Terminal, #4-40, Green Insulator RoHS : Compliant | 16,882 | |||
| 337-020-520-812 | EDAC Inc | Card Edge Connector, 20 Contact(s), 2 Row(s), Female, Straight, 0.156 inch Pitch, Solder Terminal, Hole 0.128, Green Insulator RoHS : Compliant | 14,207 | |||
M38510/33702B2X![]() | Texas Instruments | Decimal Decoder/Driver, F/FAST Series, Inverted Output, TTL, CQCC20 | 7,202 | |||
| BC337-025 | onsemi | Transistor RoHS : Not Compliant | 6,523 | |||
M38510/33702BFX![]() | Texas Instruments | Decoder/Driver, F/FAST Series, Inverted Output, TTL, CDFP16 | 5,889 | |||
M38510/33702BEX![]() | Texas Instruments | Decoder/Driver, F/FAST Series, Inverted Output, TTL, CDIP16 | 4,164 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |