| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
Avnet Americas | 143-3399-004
| ITT Interconnect Solutions | - Bulk (Alt: 143-3399-004)
RoHS : Not Compliant | 2,000 : $265.08188
1,000 : $270.41977
500 : $275.9591
100 : $324.01367
50 : $425.97995
|
| 0
 |
143-3399-005
| ITT Interconnect Solutions | - Bulk (Alt: 143-3399-005)
RoHS : Compliant | 2,000 : $159.236
1,000 : $162.4425
500 : $165.77
100 : $194.62918
50 : $255.8337
|
| 0
|
143-3399-003
| ITT Interconnect Solutions | MS3452*24-7S - Bulk (Alt: 143-3399-003)
RoHS : Not Compliant | 2,000 : $190.8452
1,000 : $191.8189
500 : $192.7926
100 : $217.61646
50 : $258.45947
|
| 0
|
Mouser Electronics | 33-3997EXF-00-5000
| Calian | Antennas eXtended Filter Full BD+L-BD Correction (28dB) SMA STR MALE CONN 5000mm cable
RoHS : Compliant | | 39
|
33-3990XF-01-01
| Calian | Antennas eXtended Filter Full-BD+L-BD Correction TNC FEM CONN Conical WHT Radome NO CBL
RoHS : Compliant | | 22
|
33-3990XF-00-10-5000
| Calian | Antennas eXtended FLTR Full-BD+L-BD CORR SMA STR MALE CONN LowPro Grey Radome 5000mm CBL
RoHS : Compliant | | 15
|
33-3990XF-14-01
| Calian | Antennas eXtended Filter Full-BD+L-BD CORR N-type FEM CONN Conical WHT Radome NO CBL
RoHS : Compliant | | 7
|
33-3997EXF-09-0150
| Calian | Antennas eXtended FLTR Full BD+L-BD CORR (28dB) U.FL RT ANGLE FEM MicroCX CONN 0150mm CBL
RoHS : Compliant | | 2
|
33-3990EXF-00-5000
| Calian | Antennas eXtended Filter Full BD+L-BD Correction (35dB) SMA STR MALE CONN 5000mm cable
RoHS : Compliant | | 2
|
33-3997EXF-05-0150
| Calian | Antennas eXtended Filter Full BD+L-BD Correction (28dB) MXC RT ANGLE MALE CONN 0150mm CBL
RoHS : Compliant | | 1
|
33-3990EXF-09-0150
| Calian | Antennas eXtended FLTR Full BD+L-BD CORR (35dB) U.FL RT ANGLE FEM MicroCX CONN 0150mm CBL
RoHS : Compliant | | 1
|
33399
| Wiha Quality Tools | Screwdrivers, Nut Drivers & Socket Drivers 49 Piece 1/4 Drive MM and SAE Socket Set
RoHS : Not Applicable | | 0
 |
Q40SN6RQ
| Banner Engineering Corp | Photoelectric Sensors EZ-BEAM Q40 Series: Receiver; Range: 60 m; Input: 10-30 V dc; Output: Complementary NPN; 4-pin M12 Integral QD | | 0
|
33-3990EXF-05-0150
| Calian | Antennas eXtended Filter Full BD+L-BD Correction (35dB) MCX RT ANGLE MALE CONN 0150mm CBL
RoHS : Compliant | | 0
|
333991
| Murrelektronik GmbH | Murrelektronik MSAL0-A-T105_0.5-XH, Dinotec 2550-005-00 | | 0
|
333992
| Murrelektronik GmbH | Murrelektronik MSAL0-A-T105_1.0-XH, Dinotec 2550-010-00 | | 0
|
333993
| Murrelektronik GmbH | Murrelektronik MSAL0-A-T105_2.0-XH, Dinotec 2550-020-00 | | 0
|
333994
| Murrelektronik GmbH | Murrelektronik MSAL0-A-T105_3.0-XH, Dinotec 2550-030-00 | | 0
|
Newark | MEG63339904
| LG Corporation | Rail Holder; |Lg MEG63339904
RoHS : Not Compliant | 1 : $41.05
5 : $37.98
10 : $36.17
25 : $34.12
50 : $31.57
100 : $29.52
250 : $26.46
|
| 1
|
33399
| Wiha Quality Tools | 49 Piece 1/4 Drive Mm And Sae Socket Set Rohs Compliant: Yes |Wiha 33399
RoHS : Compliant | | 0
|
MEG63339903
| LG Corporation | Rail Holder; |Lg MEG63339903
RoHS : Not Compliant | 1 : $41.05
5 : $37.98
10 : $36.17
25 : $34.12
50 : $31.57
100 : $29.52
250 : $26.46
|
| 0
|
RS | Q40SN6RQ (33399)
| Banner Engineering Corp | PHOTOELECTRIC SENSOR, RECEIVER, 60M, 10-30VDC, NPN, QD, Q40 | 1 : $132.98
5 : $121.01
10 : $115.69
|
| 2
|
2454037 (25533399) (HFI503704000NA-025RS)
| RS Pro | 3/8-24 X 4 IN HEX HEAD CAP SCREW, GRADE 5, ZINC PLATED, FINE | | 2
|
FLK-TIS60+ 30HZ (5133399)
| Fluke Calibration | THERMAL IMAGER, 30 HZ, RESOLUTION: 320X240, IR FUSION, AUTOBLEND, TIS SERIES | | 1
|
33399
| Wiha Quality Tools | Socket Set, 1/4 in Drive, MM and SAE, 49 Piece | | 0
|
333993
| Burkert Fluid Control Systems | CONTROL SYSTEM, AIRLINE, 8644-11-08-10-00-00-00-000-WG-00-00-00, 8644 SERIES | | 0
|
333994
| Burkert Fluid Control Systems | SHUT OFF VALVE, 2032-A-25,0-EA-B-VH-SODF-TG04-D-F * | | 0
|
333998
| Burkert Fluid Control Systems | 33399814 | | 0
|
333999
| Burkert Fluid Control Systems | VALVE, ROCKER, SOLENOID, 0127-T-01,2-CC-PK-FB23-012/DC-03 *, 127 SERIES | 1 : $220.69
5 : $209.66
10 : $203.04
|
| 0
|
333996
| Burkert Fluid Control Systems | SPARES SET, SET3-6240-000-06,0DFVA0000-00333996* | | 0
|
333995
| Burkert Fluid Control Systems | VALVE ISLAND, 8652-24-00-00-24-00-00-00-00-EET-I-00, 8652 SERIES | | 0
|
4333994
| WIKA Instrument LP | PRESSURE GAUGE;232.34 4.5 2000PSI 1/2 L DAMP;1/2" NPT LOWER MOUNT;PLASTIC CASE | | 0
|
531102 (00051115333996)
| 3M | Standard Abrasives Quick Change Aluminum Oxide Resin Fiber Disc | 25 : $2.48
50 : $2.35
100 : $2.28
|
| 0
|
EAMK-A-R48-48A (1133399)
| Festo | COUPLING HOUSING, FOR MOTOR ASSY, 48MM CNTR DIA, MOTOR IF 48MM A, R AXIS | | 0
|
7010533399 (00638060709153)
| 3M | Hookit Microfinishing Film Disc 366L, 50 Mic, Type D, 8 in x NH, Die 800L | 200 : $4.97
400 : $4.73
800 : $4.58
|
| 0
|
16_QN-50-7-2/133_NE (23033399)
| HUBER+SUHNER | RF CONNECTORS / COAXIAL CONNECTORS, QN RIGHT ANGLE CABLE PLUG | | 0
|
Bisco Industries | MS21333-99
| UMPCO Inc | | | 231
|
MS3339-9-9
| MS Miscellaneous | | | 75
|
Onlinecomponents.com | 33399
| Wiha Quality Tools | 49 PIECE 1/4 DRIVE MM AND
RoHS : Compliant | 25 : $144.39
10 : $151.99
5 : $159.99
3 : $168.41
1 : $177.27
|
| 0
|
CEG1-1REC4-33399-05-V
| Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag
RoHS : Compliant | 252 : $20.69
102 : $25.6
51 : $28.49
27 : $32.55
12 : $49.39
6 : $53.35
3 : $71.43
|
| 0
|
CEG1-1REC4-33399-10-V
| Sensata Circuit Breakers | Cir Brkr Mag-hydr Lever
RoHS : Compliant | 250 : $10.85
100 : $13.09
50 : $14.22
25 : $15.56
10 : $24.12
5 : $24.49
1 : $34.76
|
| 0
|
CEG1-1REC4-33399-252-V
| Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag
RoHS : Compliant | 102 : $27.95
51 : $31.12
21 : $51.5
12 : $53.81
6 : $57.33
3 : $76.74
|
| 0
|
Rochester Electronics | MCZ33399EFR2
 | Freescale Semiconductor | IC INTERFACE Transceiver LIN 20kbps 7V - 18V 8-SOIC T/R
RoHS : Compliant | 100,000 : $0.6144
10,000 : $0.7333
1,000 : $0.8225
500 : $0.8919
100 : $0.991
|
| 572,500
|
Sager | CEG1-1REC4-33399-05-V
| Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag | 1 : $66.2
45 : $40.66
108 : $31.66
321 : $25.07
666 : $23.14
1,383 : $21.4
|
| 0
|
CEG1-1REC4-33399-252-V
| Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag | 1 : $72.24
42 : $44.25
87 : $38.48
297 : $27.3
612 : $25.19
1,272 : $23.24
|
| 0
|
CEG1-1REC4-33399-06-V
| Sensata Circuit Breakers | Circuit Breakers | | 0
|
CEG1-1REC4-33399-03-V
| Sensata Circuit Breakers | Circuit Breakers | | 0
|
CEG1-1REC4-33399-10-V
| Sensata Circuit Breakers | Circuit Breakers | | 0
|
TME | 2333994-1
| TE Connectivity | Connector: wire-wire; female; data; 4.14mm; natural; crimped
RoHS : Compliant | | 5,000
|
6333990
| Gedore Torque Ltd | Wrench; hook; tool steel; 108mm; phosphated | 5 : $10.09
3 : $10.76
1 : $11.96
|
| 0
|
ComSIT USA | MCZ33399EFR2
| Freescale Semiconductor | LOCAL INTERCONNECT NETWORK (LIN) PHYSICAL INTERFACE Interface Circuit, PDSO8
RoHS : Compliant | | 12,585
|
Interstate Connecting Components | 2333994-1
| TE Connectivity | 04P MINI UMNL CAP HSG GWT
RoHS : Compliant | | 0
|
143-3399-003
| ITT Interconnect Solutions | INS ASSY MS3452LCVA2-24-7S | | 0
|
143-3399-004
| ITT Interconnect Solutions | INSUL ASSY CVA24-7S | | 0
|
143-3399-005
| ITT Interconnect Solutions | INS ASSY MS3450-24-7S | | 0
|
Braemac Americas-Symmetry | 33-3990XF-01-01
| Calian | eXtended-Filtered Full-Band Plus L-Band Corrections, HAS support/coverage, includes Ground Plane, TNC female connector, conical white radome, no cable | | 0
|
33-3990XF-14-01
| Calian | eXtended-Filtered Full-Band Plus L-Band Corrections, HAS support/coverage, includes Ground Plane, N-type female connector, conical white radome, no cable | | 0
|
33-3997EXF-09-0110
| Calian | TW3997EXF, embedded full band GNSS antenna with U.FL connector, 110mm cable length, XF filtering | | 0
|
33-3990EXF-10-250
| Calian | GNSS full band, L-band, TW3990EXF, SMA R/A, 250mm cable length | | 0
|
33-3990EXF-09-0150
| Calian | eXtended Filter Full Band Plus L-Band Corrections (35dB), HAS support/coverage, U.FL right angle female micro-coax connector, 0150mm cable | | 0
|
33-3997EXF-09-0150
| Calian | eXtended Filter Full Band Plus L-Band Corrections (28dB), HAS support/coverage, U.FL right angle female micro-coax connector, 0150mm cable | | 0
|
33-3990XF-00-10-5000
| Calian | eXtended-Filtered Full-Band Plus L-Band Corrections, HAS support/coverage, includes Ground Plane, SMA straight male connector, low profile grey radome, 5000mm cable | | 0
|
33-3990EXF-05-0150
| Calian | eXtended Filter Full Band Plus L-Band Corrections (35dB), HAS support/coverage, MCX right angle male connector, 0150mm cable | | 0
|
33-3997XF-09-0110
| Calian | TW3997XF antenna with UFL, 110mm cable length. | | 0
|
33-3997EXF-00-5000
| Calian | eXtended Filter Full Band Plus L-Band Corrections (28dB), HAS support/coverage, SMA straight male connector, 5000mm cable | | 0
|
33-3990XF-01-10
| Calian | TW3990XF Full Band GNSS Antenna adds L-band, E6 | | 0
|
33-3997EXF-05-0150
| Calian | eXtended Filter Full Band Plus L-Band Corrections (28dB), HAS support/coverage MXC right angle male connector, 0150mm cable | | 0
|
33-3990EXF-00-5000
| Calian | eXtended Filter Full Band Plus L-Band Corrections (35dB), HAS support/coverage, SMA straight male connector, 5000mm cable | | 0
|
EBV Elektronik | MCZ33399EF
| NXP Semiconductors | LIN Local Interconnect Network Physical Interface (Alt: MCZ33399EF)
RoHS : Compliant | | 0
|
PC33399P1EF
| NXP Semiconductors | Interface ICs (Alt: PC33399P1EF)
RoHS : Compliant | | 0
|
MCZ33399EFR2
| NXP Semiconductors | LIN Transceiver 10 Kbps to 20 Kbps 7V to 18V Supply 525V250 A Output SOIC8 (Alt: MCZ33399EFR2)
RoHS : Compliant | | 0
|
PC33399P1EFR2
| NXP Semiconductors | Interface ICs (Alt: PC33399P1EFR2)
RoHS : Compliant | | 0
|
Flip Electronics | MC33399PEFR2
| NXP Semiconductors | Stock
RoHS : Compliant | | 82,500
|
Master Electronics | 143-3399-003
| ITT Interconnect Solutions | INS ASSY MS3452L/CVA2-24-7S / 143-3399-003 / Circular
RoHS : Compliant | 50 : $241.69
38 : $246.62
25 : $363.39
13 : $662.05
|
| 0
|
143-3399-004
| ITT Interconnect Solutions | INSUL ASSY CVA24-7S / 143-3399-004 / Circular
RoHS : Compliant | 50 : $372.96
38 : $380.57
25 : $566.54
13 : $1,066.57
|
| 0
|
CEG1-1REC4-33399-05-V
| Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag
RoHS : Compliant | 252 : $20.69
102 : $25.6
51 : $28.49
27 : $32.55
12 : $49.39
6 : $53.35
3 : $71.43
|
| 0
|
CEG1-1REC4-33399-252-V
| Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag
RoHS : Compliant | 102 : $27.95
51 : $31.12
21 : $51.5
12 : $53.81
6 : $57.33
3 : $76.74
|
| 0
|
143-3399-005
| ITT Interconnect Solutions | INS ASSY MS3450-24-7S / 143-3399-005 / Circular
RoHS : Compliant | 50 : $226.3
38 : $230.92
25 : $340.25
13 : $619.89
|
| 0
|
CEG1-1REC4-33399-10-V
| Sensata Circuit Breakers | Cir Brkr Mag-hydr Lever
RoHS : Compliant | 250 : $10.85
100 : $13.09
50 : $14.22
25 : $15.56
10 : $24.12
5 : $24.49
1 : $34.76
|
| 0
|
JE-1503-3339-9
| 3M Interconnect | .050 BOARDMOUNT THRU-HOLE
RoHS : Compliant | 100 : $6.91
75 : $7.05
50 : $7.56
25 : $10.07
|
| 0
|
Pasternack Enterprises US | PE33399LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75. 75 Ohm BNC Male to 75 Ohm BNC Male Cable Using 75 Ohm RG11 Coax, RoHS. PE33399LF is a BNC male to BNC male cable using RG11 coax. This Pasternack BNC male to BNC male cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE33399LF BNC male to BNC male cable assembly is constructed with RG11 coax. | | 288
|
PE33399
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75. 75 Ohm BNC Male to 75 Ohm BNC Male Cable Using 75 Ohm RG11 Coax. PE33399 is a BNC male to BNC male cable using RG11 coax. This Pasternack BNC male to BNC male cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE33399 BNC male to BNC male cable assembly is constructed with RG11 coax. | | 288
|
PE33399-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 12 Inch Length Using 75 Ohm RG11 Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 12 inch length using 75 Ohm RG11 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male cable 12 inch length using 75 Ohm RG11 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33399-12, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33399-12 is built with RG11 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 12 inch length using 75 Ohm RG11 coax. | 1 : $85.59
25 : $81.31
50 : $77.03
100 : $73.61
|
| 48
|
PE33399LF-24
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 24 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 24 Inch Length Using 75 Ohm RG11 Coax, RoHS., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 24 inch length using 75 Ohm RG11 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male cable 24 inch length using 75 Ohm RG11 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33399LF-24, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33399LF-24 is built with RG11 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 24 inch length using 75 Ohm RG11 coax, RoHS. | 1 : $100.99
25 : $95.94
50 : $90.89
100 : $86.85
|
| 48
|
PE33399-60
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 60 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 60 Inch Length Using 75 Ohm RG11 Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 60 inch length using 75 Ohm RG11 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male cable 60 inch length using 75 Ohm RG11 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33399-60, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33399-60 is built with RG11 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 60 inch length using 75 Ohm RG11 coax. | 1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03
|
| 48
|
PE33399LF-48
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 48 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 48 Inch Length Using 75 Ohm RG11 Coax, RoHS., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG11 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG11 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33399LF-48, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33399LF-48 is built with RG11 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG11 coax, RoHS. | 1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59
|
| 48
|
PE33399LF-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 12 Inch Length Using 75 Ohm RG11 Coax, RoHS., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 12 inch length using 75 Ohm RG11 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male cable 12 inch length using 75 Ohm RG11 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33399LF-12, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33399LF-12 is built with RG11 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 12 inch length using 75 Ohm RG11 coax, RoHS. | 1 : $78.19
25 : $74.28
50 : $70.37
100 : $67.24
|
| 48
|
PE33399LF-36
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 36 Inch Length Using 75 Ohm RG11 Coax, RoHS., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG11 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG11 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33399LF-36, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33399LF-36 is built with RG11 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG11 coax, RoHS. | 1 : $82.39
25 : $78.27
50 : $74.15
100 : $70.86
|
| 48
|
PE33399-36
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 36 Inch Length Using 75 Ohm RG11 Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG11 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG11 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33399-36, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33399-36 is built with RG11 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG11 coax. | 1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5
|
| 48
|
PE33399-24
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 24 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 24 Inch Length Using 75 Ohm RG11 Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 24 inch length using 75 Ohm RG11 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male cable 24 inch length using 75 Ohm RG11 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33399-24, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33399-24 is built with RG11 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 24 inch length using 75 Ohm RG11 coax. | 1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15
|
| 48
|
PE33399-48
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 48 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 48 Inch Length Using 75 Ohm RG11 Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG11 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG11 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33399-48, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33399-48 is built with RG11 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG11 coax. | 1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31
|
| 48
|
PE33399-72
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 72 Inch Length Using 75 Ohm RG11 Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 72 inch length using 75 Ohm RG11 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male cable 72 inch length using 75 Ohm RG11 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33399-72, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33399-72 is built with RG11 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 72 inch length using 75 Ohm RG11 coax. | 1 : $102.99
25 : $97.84
50 : $92.69
100 : $88.57
|
| 48
|
PE33399LF-60
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 60 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 60 Inch Length Using 75 Ohm RG11 Coax, RoHS., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 60 inch length using 75 Ohm RG11 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male cable 60 inch length using 75 Ohm RG11 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33399LF-60, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33399LF-60 is built with RG11 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 60 inch length using 75 Ohm RG11 coax, RoHS. | 1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15
|
| 48
|
PE33399LF-72
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 72 Inch Length Using 75 Ohm RG11 Coax, RoHS., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 72 inch length using 75 Ohm RG11 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male cable 72 inch length using 75 Ohm RG11 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33399LF-72, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33399LF-72 is built with RG11 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 72 inch length using 75 Ohm RG11 coax, RoHS. | 1 : $94.19
25 : $89.48
50 : $84.77
100 : $81.0
|
| 48
|
PE33399/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 75 Ohm BNC Male Cable Using 75 Ohm RG11 Coax with HeatShrink. PE33399/HS is a BNC male to BNC male cable using RG11 coax. This Pasternack BNC male to BNC male cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE33399/HS BNC male to BNC male cable assembly is constructed with RG11 coax. | | 0
|
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand