3114-R2 Price, Distributor, Stock

These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging

92-31-122

Southco

The high-end designs of these contoured handles combine both aesthetics and ergonomics in one and provide an ample handhold for easy actuation. A quick quarter-turn action is all it takes to engage or disengage cam from the frame. Extended shaft lengths

4695-3118-SS

RAF Electronic Hardware

47-10-231-15

Southco

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

47-80-531-15

Southco

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

53-11-310-26

Southco

These screws and captive screws provide an attractive polished finish and ample shaft length to mate with threaded receptacle on frame throughout a range of panel thicknesses. They are available with spring ejection to retract the screw body when threads

53-11-510-24

Southco

RS-3117-0375

Heyco

RS 0312 OD X171 ID X375 LG NAT

RS-3117-0500

Heyco

RS 0312 OD X171 ID X500 LG NAT

E3-11-312

Southco

E3-11-312

E3-110-206

Southco

E3-110-206

E3-113-85

Southco

The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic

E5-2-031-191

Southco

These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit

E5-2-131-181

Southco

D8-314-731-170

Southco

Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o

Pasternack Enterprises US

PE3C3113-120

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. N Male to N Female Bulkhead Low Loss Cable 120 Inch Length Using LMR-400-UF Coax., Radio frequency assembly N male to N female bulkhead low loss cable 120 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female bulkhead low loss cable 120 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type bulkhead cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and female on end 2. PE3C3113-120 can also be known as a low loss type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C3113-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3113-120 can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead low loss cable 120 inch length using LMR-400-UF coax.

1 : $147.99
25 : $140.59
50 : $133.19
100 : $127.27

132

PE3C0631-12

Pasternack Enterprises

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

PE3C6231-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum 4.3-10 Male Right Angle to 7/16 DIN Female Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male right angle to 7/16 DIN female low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male right angle to 7/16 DIN female low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-716F-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle TC-250-4310M-RA-LP 4.3-10 cable connection on one end and TC-SPP250-716F-LP 7/16 DIN cable connection on the other. Our low PIM right angle TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-716F-LP 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-716F-LP 7/16 DIN cable is a male to female coax assembly, PE3C6231-100CM, can also be known as a low PIM right angle TC-250-4310M-RA-LP 4.3-10 plug to TC-SPP250-716F-LP 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-RA-LP 4.3-10 plug to TC-SPP250-716F-LP 7/16 DIN jack cable assembly PE3C6231-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-RA-LP 4.3-10 cable assembly is manufactured with right angle TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-716F-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-RA-LP 4.3-10 right angle male to TC-SPP250-716F-LP 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6231-100CM can also be used in the other direction and will be TC-SPP250-716F-LP 7/16 DIN female to right angle TC-250-4310M-RA-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-RA-LP 4.3-10 right angle plug to TC-SPP250-716F-LP 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-716F-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-250-4310M-RA-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male right angle to 7/16 DIN female low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

PE7311-6

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 7.5 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.45:1, Attenuation: 6 dB, Connector Series 1: N, Connector Gender 1: Female, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 6 dB Fixed Attenuator, N Female To 7/16 DIN Male Directional Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 7.5 GHz. PE7311-6 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a female gender on side 1 and a 7/16 DIN male connector on side 2. The Pasternack PE7311-6 6 dB attenuator is rated for up to 7.5 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7311-6 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $668.99
10 : $642.23
25 : $615.47

PE3W13111

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Sexless, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to TNC Sexless Cable Using LMR-195 Coax. PE3W13111 is a BNC male right angle to TNC sexless cable using LMR-195 coax. This Pasternack BNC male right angle to TNC sexless cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm TNC for connector 2. BNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to sexless TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13111 BNC male right angle to TNC sexless cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C3115-24

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male Right Angle to N Female Low Loss Test Cable 24 Inch Length Using PE-P300LL Coax, LF Solder., Radio frequency assembly N male right angle to N female low loss test cable 24 inch length using PE-P300LL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to N female low loss test cable 24 inch length using PE-P300LL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with right angle type N cable connection on one end and type N cable connection on the other. Our low loss test right angle N type to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C3115-24, can also be known as a low loss test right angle type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3C3115-24 is built with PE-P300LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type right angle male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3115-24 can also be used in the other direction and will be type N female to right angle N type male cable assembly if the opposite connectivity is required. Low loss test N type right angle plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female low loss test cable 24 inch length using PE-P300LL coax, LF solder.

1 : $604.99
25 : $574.74
50 : $544.49

PE3111-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to SMB Plug Right Angle Cable 36 Inch Length Using RG174 Coax., Radio frequency assembly SMA male right angle to SMB plug right angle cable 36 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMB plug right angle cable 36 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMB cable connection on the other. Our right angle SMA to right angle SMB cable assembly has male gender on end 1 and plug on end 2. PE3111-36 can also be known as a right angle SMA plug to right angle SMB male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE dielectric type. SMA plug to SMB male cable assembly PE3111-36 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMB cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3111-36 RF cable are available on our downloadable PDF datasheet.PE3111-36 can also be used in the other direction and will be right angle SMB plug to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $102.99
25 : $97.84
50 : $92.69
100 : $88.57

PE34311-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 12 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 12 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 12 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE34311-12, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE34311-12 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34311-12 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 12 inch length using PE-SR405AL coax.

1 : $89.89
25 : $85.4
50 : $80.9
100 : $77.31

PE3C3111-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tin/Nickel, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. UHF Male to UHF Male Low Loss Cable 12 Inch Length Using LMR-600-DB Coax with Times Microwave Components., Radio frequency assembly UHF male to UHF male low loss cable 12 inch length using LMR-600-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The UHF male to UHF male low loss cable 12 inch length using LMR-600-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom UHF to UHF cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a UHF cable connection on one end and a UHF cable connection on the other. Our low loss a UHF to a UHF cable assembly has male gender on end 1 and male on end 2. PE3C3111-12 can also be known as a low loss UHF plug to UHF plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3111-12 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. UHF plug to UHF plug cable assembly PE3C3111-12 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tin/nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss UHF plug to UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF to UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $252.99
25 : $240.34
50 : $227.69
100 : $217.57

PE3C3113/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50. N Male to N Female Bulkhead Cable Using LMR-400-UF Coax. PE3C3113/HS is a N type male to N type female bulkhead cable using LMR-400-UF coax. This Pasternack type N male to type N female bulkhead cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm N type for connector 2. Our male type N to female type N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3113/HS type N male to type N female bulkhead cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W13114

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. N Female Bulkhead to N Female Bulkhead Cable Using RG188-DS Coax. PE3W13114 is a N female bulkhead to N female bulkhead cable using RG188-DS coax. This Pasternack N female bulkhead to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N bulkhead to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13114 N female bulkhead to N female bulkhead cable assembly is constructed with RG188-DS coax.

PE34311LF

Pasternack Enterprises

PE3C3111

Pasternack Enterprises

Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tin/Nickel, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm. UHF Male to UHF Male Low Loss Cable Using LMR-600-DB Coax with Times Microwave Components., Radio frequency assembly UHF male to UHF male low loss cable using LMR-600-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The UHF male to UHF male low loss cable using LMR-600-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom UHF to UHF cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a UHF cable connection on one end and a UHF cable connection on the other. Our low loss a UHF to a UHF cable assembly has male gender on end 1 and male on end 2. PE3C3111 can also be known as a low loss UHF plug to UHF plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3111 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. UHF plug to UHF plug cable assembly PE3C3111 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tin/nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss UHF plug to UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF to UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

PE3C3115-36

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male Right Angle to N Female Low Loss Test Cable 36 Inch Length Using PE-P300LL Coax, LF Solder., Radio frequency assembly N male right angle to N female low loss test cable 36 inch length using PE-P300LL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to N female low loss test cable 36 inch length using PE-P300LL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with right angle type N cable connection on one end and type N cable connection on the other. Our low loss test right angle type N to N type cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C3115-36, can also be known as a low loss test right angle type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C3115-36 is built with PE-P300LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N right angle male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3115-36 can also be used in the other direction and will be type N female to right angle N type male cable assembly if the opposite connectivity is required. Low loss test type N right angle plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female low loss test cable 36 inch length using PE-P300LL coax, LF solder.

1 : $500.99
25 : $475.94
50 : $450.89

PE3W03115

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. N Female Bulkhead to Reverse Polarity Push-On MCX Plug Right Angle Cable Using LMR-100 Coax. PE3W03115 is a N female bulkhead to reverse polarity MCX plug right angle cable using LMR-100A coax. This Pasternack N female bulkhead to reverse polarity MCX plug right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm MCX for connector 2. N to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N bulkhead to reverse polarity plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03115 N female bulkhead to MCX reverse polarity plug right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

TE Connectivity

640311-5

TE Connectivity

MINI AMP-IN 22-18 AWG POST TIN PLTD PCB Terminal Type: PCB Pin PCB Hole Diameter: 1.83 mm PCB Hole Diameter: .072 in PCB Thickness (Recommended): 1.57 mm PCB Thickness (Recommended): .062 in PCB Pin 1.83 mm .072" 1.57 mm | PCB Terminal | Part Number: 640311-5 | Internal Number: 640311-5 | TE Connectivity
RoHS : Compliant

1,000 : $0.08
100 : $0.1
25 : $0.16
10 : $0.18
1 : $0.19

25,650

1-1326031-1

TE Connectivity

2.8MM BLD,SEAL,12AWG Terminal Type: Tab Wire Size: 12 AWG Wire Size: 3.3 mm² Mating Tab Width: .11 in Mating Tab Width: 2.8 mm Tab 12 AWG 3.3 mm² .11" | 1.5/2.8 Connector System & Recpt And Tab | Part Number: 1-1326031-1 | Internal Number: 1-1326031-1 | TE Connectivity
RoHS : Compliant

10,000 : $0.13
5,000 : $0.16
2,500 : $0.22
1,000 : $0.29
500 : $0.43
100 : $0.52

6,685

3-640311-1

TE Connectivity

MINI AMP-IN 22-18 AWG .008PTPPHBZ PCB Terminal Type: PCB Pin PCB Hole Diameter: 1.83 mm PCB Hole Diameter: .072 in PCB Thickness (Recommended): 1.57 mm PCB Thickness (Recommended): .062 in PCB Pin 1.83 mm .072" 1.57 mm | PCB Terminal | Part Number: 3-640311-1 | Internal Number: 3-640311-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.09
100 : $0.12
10 : $0.15
1 : $0.19

5,600

2311768-2

TE Connectivity

AMPL REC, HD22, R/A, 26P, S/L Number of Positions: 26 Connector & Housing Type: Receptacle Connector System: Wire-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 2 D-Shaped Connector | 26 Receptacle Wire-to-Board Board Mount | Part Number: 2311768-2 | Internal Number: 2311768-2 | TE Connectivity
RoHS : Compliant

1,000 : $9.09
500 : $9.34
250 : $9.63
100 : $9.96
50 : $10.25
1 : $11.25

1,634

3-1192109-9

TE Connectivity

44A0111-14-0 Cable Type: Spec 44 Operating Voltage: 600 V Wire & Cable Insulation Material: Modified Radiation Cross-linked PVDF Conductor Material: Tin-Coated Copper Wire Size: 14 AWG Spec 44 600 V Modified Radiation Cross-linked PVDF Tin-Coated Copper | Hook Up Wire | Part Number: 3-1192109-9 | Internal Number: 282236-000 | 14 AWG | TE Connectivity
RoHS : Compliant

1 : $1.08

746

2-320631-1

TE Connectivity

TERMINAL, PIDG RING 16-14 HD 6 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.25 – 2 mm² Wire Size: 2050 – 5180 CMA Stud Size: M3.5 #6 Closed Ring Tongue Terminal 16 – 14 AWG 1.25 – 2 mm² 2050 – 5180 CMA | Pidg Ring Tongue Terminal | Part Number: 2-320631-1 | Internal Number: 2-320631-1 | TE Connectivity
RoHS : Compliant

1,000 : $1.61
500 : $1.66
250 : $1.71
100 : $1.76
50 : $1.81
25 : $1.86
10 : $1.91
1 : $1.95

544

2-2331102-1

TE Connectivity

TAB HEADER 46POS. PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 46 Number of Rows: 3 Centerline (Pitch): 4 mm Vertical Wire-to-Board 46 3 | Leavyseal Connector Header | Part Number: 2-2331102-1 | Internal Number: 2-2331102-1 | 4 mm | TE Connectivity
RoHS : Compliant

1 : $38.07

115

500031-1

TE Connectivity

SPIRAP 1/2 PE, OUTDR,BLK,50FT Wire & Cable Accessory Type: Cable Tie Tool Cable Tie Mount Type: Spiral Primary Product Material: Outdoor Polyethylene Primary Product Color: Black Packaged Length: 15.24 m Cable Tie Tool Spiral Outdoor Polyethylene Black | Cable Tie Mounts & Accessories | Part Number: 500031-1 | Internal Number: 500031-1 | TE Connectivity
RoHS : Compliant

500 : $4.51
250 : $4.66
100 : $4.82
50 : $4.97
25 : $5.13
10 : $5.28
1 : $5.44

114

1-2273110-4

TE Connectivity

M8 strgt socket to M12 strgt plug AA Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 1.5 m Cable Assembly Length: 4.9 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 1.5 m 4.9 ft | M8 Fs - M12 Ms Cable Assembly Bl | Part Number: 1-2273110-4 | Internal Number: 1-2273110-4 | TE Connectivity
RoHS : Compliant

50 : $26.71
25 : $28.29
10 : $29.86
1 : $31.43

1-2273111-4

TE Connectivity

M8 strgt socket to M12 strgt plug AA Cable Assembly Type: M8 to M12 Number of Positions: 4 Cable Assembly Length: 1.5 m Cable Assembly Length: 4.9 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 4 1.5 m 4.9 ft | M8 Fs - M12 Ms Cable Assembly Bl | Part Number: 1-2273111-4 | Internal Number: 1-2273111-4 | TE Connectivity
RoHS : Compliant

100 : $36.66
50 : $38.4
25 : $40.14
10 : $41.89
1 : $43.63

1-2273110-5

TE Connectivity

M8 strgt socket to M12 strgt plug AA Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 2 m 6.5 ft | M8 Fs - M12 Ms Cable Assembly Bl | Part Number: 1-2273110-5 | Internal Number: 1-2273110-5 | TE Connectivity
RoHS : Compliant

25 : $28.35
10 : $30.53
1 : $32.71

2178531-1

TE Connectivity

CROWN CLIP JUNIOR CONNECTOR Connector System: Board-to-Bus Bar Number of Positions: 1 Connector & Contact Terminates To: Printed Circuit Board Mating Conductor Thickness: .118 in Mating Conductor Thickness: 3 mm Board-to-Bus Bar 1 Printed Circuit Board .118" | Busbar Connector | Part Number: 2178531-1 | Internal Number: 2178531-1 | TE Connectivity
RoHS : Compliant

1,000 : $7.68
500 : $7.9
250 : $8.14
100 : $8.41
50 : $8.66
1 : $9.5

5103311-6

TE Connectivity

A/L LOW PRO HDR 26P RA BLACK Connector System: Wire-to-Board Number of Positions: 26 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 26 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5103311-6 | Internal Number: 5103311-6 | TE Connectivity
RoHS : Compliant

1,000 : $4.27
500 : $4.39
250 : $4.53
100 : $4.68
50 : $4.81
1 : $5.28

T1329031111-000

TE Connectivity

H3A-TG-PG11 Hood & Base Connector Product Type: Hood Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Hood Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1329031111-000 | Internal Number: T1329031111-000 | TE Connectivity
RoHS : Compliant

50 : $6.01
25 : $6.36
10 : $6.71
1 : $7.07

TAD14241311-005

TE Connectivity

M12D4-MR-PVC TYPE B RED-5.0M Cable Assembly Type: M12 Pigtail Number of Positions: 4 Cable Assembly Length: 5 m Cable Assembly Length: 16.4 ft M8/M12 Application Type: Industrial Ethernet M12 Pigtail 4 5 m 16.4 ft | Ethernet & Sercos-Iii M12-D 4Pos Pvc Red | Part Number: TAD14241311-005 | Internal Number: TAD14241311-005 | TE Connectivity
RoHS : Compliant

25 : $64.2
10 : $69.14
1 : $74.07

Teledyne HiRel

5962-8871311RA

Teledyne HiRel

PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT
RoHS : Not Compliant

5962-8606311QYA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 200 NS ACCESS TIME
RoHS : Not Compliant

5962-8871311XA

Teledyne HiRel

PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT
RoHS : Not Compliant

5962-8606311UA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 200 NS ACCESS TIME
RoHS : Not Compliant

5962-8871311SA

Teledyne HiRel

PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT
RoHS : Not Compliant

M38510/31101BEA

Teledyne HiRel

MAGNITUDE COMPARATOR, 4-BIT
RoHS : Not Compliant

5962-8606311YA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 200 NS ACCESS TIME
RoHS : Not Compliant

M38510/31101BFA

Teledyne HiRel

MAGNITUDE COMPARATOR, 4-BIT
RoHS : Not Compliant

5962-8606311XA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 200 NS ACCESS TIME
RoHS : Not Compliant

M38510/31101B2A

Teledyne HiRel

MAGNITUDE COMPARATOR, 4-BIT
RoHS : Not Compliant

5962-8606311QXA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 200 NS ACCESS TIME
RoHS : Not Compliant

Vyrian

MAX311EWN+T

Analog Devices Inc

Video Multiplexer, 1 Func, 4 Channel, CMOS, PDSO18
RoHS : Compliant

10,974

MAX6311EUK29D4+T

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 2 Channel, +2.9V, CMOS, PDSO5
RoHS : Compliant

9,561

MAX31182AUA

Analog Devices (Maxim Integrated)

8,885

MAX6311UK29D1+T

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 2 Channel, +2.9V, CMOS, PDSO5
RoHS : Compliant

8,002

MAX6311EUK47D2-T

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 2 Channel, +4.7V, CMOS, PDSO5

7,415

MAX6311UK35D4+T

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 2 Channel, +3.5V, CMOS, PDSO5
RoHS : Compliant

6,808

MAX6311EUK36D4-T

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 2 Channel, +3.6V, CMOS, PDSO5
RoHS : Unknown

6,507

MAX6311UK46D2+T

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 2 Channel, +4.6V, CMOS, PDSO5
RoHS : Compliant

6,475

MAX6311UK36D1-T

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 2 Channel, +3.6V, CMOS, PDSO5
RoHS : Unknown

5,942

MAX6311EUK31D1+T

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 2 Channel, +3.1V, CMOS, PDSO5
RoHS : Compliant

5,573

1-2273111-4

TE Connectivity

Cable Assembly, 22AWG, 30V, Communication Cable
RoHS : Compliant

5,320

MAX6311UK25D3-T

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 2 Channel, +2.5V, CMOS, PDSO5

5,182

MAX6311UK42D4-T

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 2 Channel, +4.2V, CMOS, PDSO5

5,040

MC0.063W06031%15K4

Multicomp Pro

Fixed Resistor, Metal Glaze/thick Film, 0.063W, 15400ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0603

744

MC0063W060311K62

Multicomp Pro

Fixed Resistor, Metal Glaze/thick Film, 0.063W, 1620ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0603

213

3114-R2 Distributor

Link URL