| Electronic Components Datasheet Search |
|
2718 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Master Electronics | 1-2324271-8 | TE Connectivity | LEFT SEGMENT LGA4189-5 SOCKET-P5 FOR ODM RoHS : Compliant |
| 0 | |
| 77311-127-18LF | Amphenol FCi | Connectors 18P STR SR TMT HDR .76 AU .465IN RoHS : Compliant |
| 0 | ||
CMM-2718AB-3815NC-TR![]() | Same Sky | 2.75 x 1.85 mm Analog Bottom Port Surface Mount 1.8 Vdc -38 ±1 dB MEMS Microphone RoHS : Compliant |
| 0 | ||
| HTSW-127-18-G-D | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-127-18-G-Q-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-127-18-TM-Q-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-127-182 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-127-185 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-127-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SS-02-28C-GF-27.18-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-127-189 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-127-184 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 4-2271897-0 | TE Connectivity | Conn DIN 41612 RCP 20 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| MP-762127-1-8A | TE Connectivity | Labels Thermal Transfer Printable Label Polyester Matte Silver 76.2x127mm MOQ Reduction RoHS : Compliant |
| 0 | ||
| HTSW-127-18-H-S-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Verical | 271808-000 | TE Connectivity | Cable Markers Pre-Marked Snap On Polyoxymethylene White Box RoHS : Compliant |
| 450 | |
| 271-8430-0171-702 | Dialight | Panel Mount Indicator Accessories RoHS : Not Compliant |
| 139 | ||
| 2718015 | Phoenix Contact | Sensor/Actuator Terminal Block F 5 POS Screw ST T DIN Rail 24A RoHS : Compliant |
| 100 | ||
| 271-8430-702 | Dialight | 15/32in Incand. PMI Base RoHS : Not Compliant |
| 71 | ||
| 2718206 | Phoenix Contact | Conn Installation Ground Terminal Block RCP 7 POS Screw ST T DIN Rail 24A RoHS : Compliant |
| 51 | ||
| 271-8430-0272-702 | Dialight | 15/32in Green Incand. PMI Assembly RoHS : Not Compliant |
| 23 | ||
| 271-8430-0111-702 | Dialight | 271-8430-0111-702 |
| 15 | ||
| 271847-000 | TE Connectivity | Shrink Boot Adapters 180° 14/15 Shell Size Olive Drab Cadmium Over Electroless Nickel Aluminum Alloy RoHS : Not Compliant |
| 7 | ||
| 2718701 | Phoenix Contact | Inline, Bus coupler, CANopen®, TWIN COMBICON, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including network connector, Inline connector, and marking field |
| 3 | ||
![]() Avnet Americas | 2718973 | Amphenol Corporation | CONN D38999 CIRC PIN 32 POS CRMP ST WALL MNT 32TERM - Bulk (Alt: 2718973) RoHS : Not Compliant | 57 | ||
| PSF4527180R0TZEA | Vishay Intertechnologies | PSF4527 180 .01% T-16 EA e3 - Tape and Reel (Alt: PSF4527180R0TZEA) RoHS : Compliant |
| 0 | ||
| PSF4527182R0FZEK | Vishay Intertechnologies | PSF4527 182 1% T-16 EK e3 - Bulk (Alt: PSF4527182R0FZEK) RoHS : Compliant |
| 0 | ||
| PSF452718K90BYTA | Vishay Intertechnologies | PSF4527 18.9K .1% T-13 R86 - Tape and Reel (Alt: PSF452718K90BYTA) RoHS : Not Compliant |
| 0 | ||
| PT06A-20-24PZ(027)(180) | Amphenol Corporation | Circular Connector, MIL-DTL-26482 Series I, Straight Plug, 24 Contacts, Solder Pin, Bayonet, Gold - Bulk (Alt: PT06A-20-24PZ(027)(180)) RoHS : Not Compliant |
| 0 | ||
| PSF452718K00AZBA | Vishay Intertechnologies | PSF4527 18K .05% T-16 B43 - Bulk (Alt: PSF452718K00AZBA) RoHS : Not Compliant |
| 0 | ||
| PSF452718K20FZEA | Vishay Intertechnologies | PSF4527 18.2K 1% T-16 EA e3 - Tape and Reel (Alt: PSF452718K20FZEA) RoHS : Compliant |
| 0 | ||
| D0002718 | VPG Foil Resistors | Resistor Power Chip 0.1Ohm 5% 2-Pin TO-220 - Bulk (Alt: D0002718) RoHS : Not Compliant |
| 0 | ||
| CDR34BX473BKZS38227185 | KEMET Corporation | .047UF 100V - Custom Tape W/Leader (Alt: CDR34BX473BKZS38227185) RoHS : Not Compliant |
| 0 | ||
| 10137927-1831LF | Amphenol Corporation | - Tape and Reel (Alt: 10137927-1831LF) RoHS : Not Compliant |
| 0 | ||
| MMA2718W | NXP Semiconductors | Accelerometer Single ?187g 4V to 20V 16-Pin QFN Rail - Rail/Tube (Alt: MMA2718W) RoHS : Not Compliant | 0 | |||
| PSF4527182K0FZEA | Vishay Intertechnologies | PSF4527 182K 1% T-16 EA e3 - Tape and Reel (Alt: PSF4527182K0FZEA) RoHS : Compliant |
| 0 | ||
| PSF4527182R0FXTA | Vishay Intertechnologies | PSF4527 182 1% T-10 R86 - Tape and Reel (Alt: PSF4527182R0FXTA) RoHS : Not Compliant |
| 0 | ||
| PSF452718K00BYBA | Vishay Intertechnologies | PSF4527 18K .1% T-13 B43 - Bulk (Alt: PSF452718K00BYBA) RoHS : Not Compliant |
| 0 | ||
| PSF452718K70BYEA | Vishay Intertechnologies | PSF4527 18.7K .1% T-13 EA e3 - Tape and Reel (Alt: PSF452718K70BYEA) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | SC1227 | Raspberry Pi | LCD Graphic Display Modules & Accessories Raspberry Pi Display RoHS : Compliant |
| 3,059 | |
| 2718 | Heyco | Conduit Fittings & Accessories DD 1109-1000 WHITE RoHS : Compliant |
| 1,990 | ||
| 2718206 | Phoenix Contact | DIN Rail Terminal Blocks VIOK 1 5-3D/PE RoHS : Compliant |
| 110 | ||
| 2718277 | Phoenix Contact | DIN Rail Terminal Blocks UDK 3 BU RoHS : Compliant |
| 102 | ||
| 27184 | SpotSee | Temperature Sensor Modules Cold Chain Complete 2 - 8C / 36 - 46F (Freeze Safe / WarmMark) - single window 8 hr RoHS : Compliant |
| 94 | ||
| 2718196 | Phoenix Contact | DIN Rail Terminal Blocks VIOK 1 5-2D RoHS : Compliant |
| 52 | ||
| 271-8430-702 | Dialight | Lamp Holders & Accessories EDGE LIGHT PANEL IND RoHS : Not Compliant |
| 36 | ||
| 2718015 | Phoenix Contact | DIN Rail Terminal Blocks VIOK 1 5 RoHS : Compliant |
| 18 | ||
| HLCD-30-01.73-TR-TR-1 | Samtec Inc | Rectangular Cable Assemblies High Speed Hermaphroditic Cable |
| 0 | ||
| 2718-2 | Daniels Manufacturing Corporation (DMC) | Crimpers / Crimping Tools SPECIAL PURPOSE TOOL |
| 0 | ||
| 2718-1 | Daniels Manufacturing Corporation (DMC) | Crimpers / Crimping Tools SPECIAL PURPOSE TOOL |
| 0 | ||
| 271808-000 | TE Connectivity | Wire Labels & Markers STD24W-V RoHS : Compliant |
| 0 | ||
| 2718600000 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Blocks SL 3.50/02/90G 3.2AU BK BX |
| 0 | ||
| 2718610000 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Blocks SL 3.50/02/180G 3.2AU BK BX |
| 0 | ||
| 2718020000 | Weidmüller Interface GmbH & Co. KG | Fixed Terminal Blocks LL 5.00/02/90 3.2SN OR BX PRT |
| 0 | ||
![]() Newark | 172718-3121 | Molex | Contact, Socket, 20-18Awg, Crimp; |Molex 172718-3121 RoHS : Compliant |
| 90,000 | |
| 172718-3121 | Molex | Contact, Socket, 20-18Awg, Crimp; |Molex 172718-3121 RoHS : Compliant |
| 14,635 | ||
| 172718-3111 | Molex | Contact, Socket, 20-18Awg, Crimp; |Molex 172718-3111 RoHS : Compliant |
| 6,682 | ||
CMM-2718AT-42308-TR![]() | Same Sky | Mems Microphone, Omni, -40 To 100Deg C; |Same Sky CMM-2718AT-42308-TR RoHS : Compliant |
| 1,000 | ||
| B32718P6456K000 | TDK Corporation | Cap, Power Film, 45Uf, 600V, Radial; |Tdk B32718P6456K000 RoHS : Compliant |
| 138 | ||
| TSW-127-18-G-S | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 27Pos; |Samtec, Inc. TSW-127-18-G-S RoHS : Compliant |
| 110 | ||
| FMCA2718-24 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 24", 610Mm, Rg223; |Fairview Microwave FMCA2718-24 RoHS : Not Compliant |
| 43 | ||
| FMCA2718-150CM | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 4.9 Ft, 1.5M, Rg223; |Fairview Microwave FMCA2718-150CM RoHS : Not Compliant |
| 43 | ||
| 1-2324271-8 | TE Connectivity | Lga Socket, 2097Pos, Copper Alloy; |Te Connectivity 1-2324271-8 RoHS : Compliant |
| 12 | ||
| MP002718 | SPC Multicomp | Circular Connector, 12Pos, Rcpt, Solder; |Multicomp Pro MP002718 RoHS : Compliant |
| 7 | ||
| 704.012.718 | EAO AG | Pushbutton Actuator, Round, Clear, 35Mm; |Eao 704.012.718 RoHS : Compliant |
| 5 | ||
| 704.062.718 | EAO AG | Switch Actuator, Clear, Pushbutton; |Eao 704.062.718 RoHS : Not Compliant |
| 3 | ||
| AB05 6027 18 32 PN00 | AB Connectors Ltd | Plug, Free, 32Way; |Tt Electronics/ab Connectors AB05 6027 18 32 PN00 RoHS : Not Compliant |
| 2 | ||
| 2718 | Adafruit Industries | Pi Foundation Display - 7 Touchscreen Display For Raspberry Pi |Adafruit 2718 (Alternate Part Number: 5051259022812 RoHS : Not Compliant |
| 0 | ||
| 2718 | Wiremold | Nm Ext. Elbow 2700 Ivory |Legrand Wiremold 2718 (Alternate Part Number: 5051259022812 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | DC2718A | Analog Devices Inc | No-Opto Isolated Flyback Conve RoHS : Compliant |
| 41 | |
![]() RS | 271870 | RS Pro | HEATSINK 0.5K/W 150X125X50MM |
| 190 | |
| 280755-2 (7188087) | TE Connectivity | FASTIN-FASTON .375 SERIES CRIMP RECEPTACLE, 9.53X1.22MM, 10 TO 7 AWG, TIN PLATED |
| 61 | ||
| 704.012.718 | EAO AG | INDICATOR ACTUATOR, FLUSH,35MM, NON-ILLUMINATIVE, MOM, CLEAR LENS, ALUMINUM BEZEL RoHS : Compliant |
| 56 | ||
| 2718281 | RS Pro | FUSED TERMINAL BLOCK 3 POLE PACK OF 10 - |
| 30 | ||
| 2718282 | RS Pro | FUSED TERMINAL BLOCK 4 POLE PACK OF 10 - |
| 30 | ||
| S1102SGAF (50051131271871) | 3M | SOLUS 1000-SERIES SAFETY GLASSES, BLACK/BLUE, GREY SCOTCHGARD ANTI-FOG LENS |
| 20 | ||
| 2451597 (25532718) (FHSIA0250175-100RS) | RS Pro | SCREW, 1/4-20 X 1 3/4 FLAT SOCKET CAP, PLAIN FINISH |
| 5 | ||
| 271864 | RS Pro | HEATSINK, UNIVERSAL RECTANGULAR ALUMINUM, 1K/W, 100 X 120 X 37MM, BLACK |
| 3 | ||
| 1412718 (HC-STA-B16-HLFD-1STM32-EL-AL) | Phoenix Contact | CONNECTOR HOUSING;HOOD;SIDE ENTRY;B16;LOCKING CLIP,2 ON BASE BOTTOM |
| 2 | ||
| VS2672718-KG00 | Norgren | OUTPUT BOARD, MP PCB 2 STATIONS, 24VDC, VS26 SERIES |
| 1 | ||
| 1692718 (SACB-8/ 8-L-M23 180) | Phoenix Contact | SENSOR/ACTUATOR BOX, LED M23 PLUG CONNECTION AND SINGLE OCCUPIED SLOTS |
| 1 | ||
| 2718 | Adafruit Industries | DISPLAY DEVELOPMENT TOOLS 7" TOUCHSCREEN DISPLAY FOR RASP PI |
| 0 | ||
| 2718 | Heyco | PLUG, NYLON 6/6, WHITE, 1.1090 IN, HEIGHT 0.4500 IN, DD SERIES |
| 0 | ||
| 2718 | Wiremold | NM EXT. ELBOW 2700 IVORY |
| 0 | ||
| 2718 | 80/20 Inc | 6" HD FLANGE MOUNT CASTER, RIGID, BLUE POLY WHEEL, 1500# CAPACITY |
| 0 | ||
![]() Microchip Technology Inc | MCP1727-1802E/MF![]() | Microchip Technology Inc | 1.5A LOW VOLTAGE LDO, DFN, Projected EOL: 2036-08-02 RoHS : Compliant |
| 19,485 | |
MCP1727-1802E/SN![]() | Microchip Technology Inc | 1.5A LOW VOLTAGE LDO, SOIC, Projected EOL: 2036-08-02 RoHS : Compliant |
| 100 | ||
| ELE02718 | Microchip Technology Inc | IC,4.096V,.5%,SHUNT,SOT-23, Projected EOL: - Contact for Pricing | 0 | |||
MCP1827-1802E/ET![]() | Microchip Technology Inc | 1.5A LDO Regulator, DDPAK, Projected EOL: 2036-09-06 RoHS : Compliant |
| 0 | ||
MCP1827-1802E/AT![]() | Microchip Technology Inc | 1.5A LDO Regulator, TO-220, Projected EOL: 2036-09-06 RoHS : Compliant |
| 0 | ||
| MIC5327-1.8YMT-TR | Microchip Technology Inc | Single 300mA Low Iq LDO, UDFN, Projected EOL: 2036-08-06 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | MS27183-12 | Superior Washer & Gasket Company | 45,755 | |||
| MS27183-10 | Superior Washer & Gasket Company | 35,803 | ||||
| MS27183-14 | BINDER METAL PRODUCTS | 32,689 | ||||
| MS27183-14 | Superior Washer & Gasket Company | 32,662 | ||||
| MS27183-13 | MS Washers | 13,514 | ||||
| MS27183-1 | MS Washers | 10,702 | ||||
| MS27183-13 | Superior Washer & Gasket Company | 6,488 | ||||
| MS27183-10 | MS Washers | 271 | ||||
| M2718A-BO | MISC. INDUSTRIAL HRD | 250 | ||||
| MS27183-14 | MS Washers | 145 | ||||
| 2718 | Century Spring Corp | 25 | ||||
| MS27183-12 | MS Washers | 14 | ||||
| PN102-27-18 | MISCELLANEOUS | 10 | ||||
| MS27183-11 | MS Washers | 5 | ||||
| MS27183-15 | Superior Washer & Gasket Company | 3 | ||||
![]() Future Electronics | 2718 | Heyco | RoHS : Compliant |
| 0 | |
![]() Onlinecomponents.com | 2718 | Heyco | DD 1109-1000 WHITE RoHS : Compliant |
| 0 | |
| 155850-2718 | ITT Interconnect Solutions | Connector Miniature Circular Socket 4 Position Crimp Straight Cable Mount 4 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 2718-FW | Middle Atlantic Products | NM EXT. ELBOW 2700 FOG WH RoHS : Compliant |
| 0 | ||
| 2718-WH | Middle Atlantic Products | NM EXT ELBOW 2700 WHITE RoHS : Compliant |
| 0 | ||
| 45-2718 | Ideal Industries Inc | CUSTOM STRIPMASTER , STAN RoHS : Compliant |
| 0 | ||
| 096521-2718 | ITT Interconnect Solutions | Cable Assembly RG178/U 0.457m 26AWG 37POS Micro D-Sub SKT |
| 0 | ||
| 2718-BSS | Marinco Electrical Group | Cover MAXIbus 2105/2126 RoHS : Compliant |
| 0 | ||
| 25-2718 | Eaton Cutler-Hammer | CONNECTORS RoHS : Compliant |
| 0 | ||
| 15067-2718 | Molex | RoHS : Compliant |
| 0 | ||
| 63801-2718 | Molex | PUNCH SHAFT RoHS : Compliant |
| 0 | ||
| 17352-2718 | Molex | RoHS : Compliant |
| 0 | ||
| 15061-2718 | Molex | RoHS : Compliant |
| 0 | ||
| EUS-704.02-2718 | EAO AG | RoHS : Compliant |
| 0 | ||
| 209-2-2718-5 | Sensata Circuit Breakers | Hydraulic Magnetic Circuit Breaker, 2 Pole, 209 Series | Sensata - Airpax 209-2-2718-5 RoHS : Compliant |
| 0 | ||
| 209-2-2718-3 | Sensata Circuit Breakers | Hydraulic Magnetic Circuit Breaker, 2 Pole, 209 Series | Sensata - Airpax 209-2-2718-3 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | TPS72718DSET![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 1.8V 250mA 6-SON T/R RoHS : Compliant |
| 1,639 | |
TPS72718YFFT![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 1.8V 250mA 4-BGA T/R RoHS : Compliant |
| 9,353 | ||
TPS727185YFFT![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 1.85V 250mA 4-BGA T/R RoHS : Compliant |
| 27,700 | ||
TPS72718YFFR![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 1.8V 250mA 4-BGA T/R RoHS : Compliant |
| 605,242 | ||
TPS727185YFFR![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 1.85V 250mA 4-BGA T/R RoHS : Compliant |
| 333,671 | ||
| MIC5327-1.8YMT TR | Micrel Inc | IC VOLT REG Fixed 1 REG 1.8V 300mA 4-SON T/R RoHS : Compliant |
| 2,669 | ||
| UPA2718GR-E1-AT | NEC Electronics Group | Power Field-Effect Transistor, P-Channel MOSFET RoHS : Compliant |
| 5,000 | ||
| DZ2718000L | ROHM Semiconductor | Zener Diode |
| 190,000 | ||
| DZ27180M0L | ROHM Semiconductor | TVS Diode Zener Uni-Directional 13V (Max) SOD-723 T/R RoHS : Compliant |
| 20,000 | ||
UPA2718AGR-E1-AT![]() | Renesas Electronics Corporation | MOSFET P-Channel 30V 13A 8-SOIC T/R RoHS : Compliant |
| 7,500 | ||
UPA2718AGR-E2-AT![]() | Renesas Electronics Corporation | MOSFET P-Channel 30V 13A 8-SOIC T/R RoHS : Compliant |
| 5,000 | ||
| UPA2718GR-E1-AT | Renesas Electronics Corporation | Power Field-Effect Transistor, P-Channel MOSFET RoHS : Compliant |
| 2,500 | ||
| UPA2718GR-E2-AT | Renesas Electronics Corporation | MOSFET P-Channel 30V 13A 8-SOIC T/R RoHS : Compliant |
| 19,780 | ||
![]() Sager | 1-2324271-8 | TE Connectivity | IC & Component Sockets Socket P5 15u left side RoHS : Compliant | 0 | ||
| HTSW-127-18-G-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 2132271810 | Molex | Headers & Wire Housings CLIK-MATE1.5 DRVT SMT AU0.1 ETP 18P NAT RoHS : Compliant |
| 0 | ||
| 40527-1854 | OMRON Electronic Components | DIP Switches / SIP Switches TKAT-1854 | 0 | |||
| R51-1RE..S00271802 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| MP-762127-1-8A | TE Connectivity | Labels and Industrial Warning Signs MP 3/5 LABEL PRICE PER LABEL RoHS : Compliant |
| 0 | ||
| A17927-18 | Qnity Laird | Thermal Interface Products TFLEX B2180MFG |
| 0 | ||
| IEGS11-27187-3-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| HM-762127-1-8A | TE Connectivity | Labels & Industrial Warning Signs HM 3/5 LABEL PRICE PER LABEL RoHS : Compliant |
| 0 | ||
| A927184001 | TE Connectivity | Heat Shrink Tubing & Sleeves RoHS : Compliant |
| 0 | ||
| 1727185112 | Molex | Headers & Wire Housings MINIFIT TPA 2.0 CRP TERM PHBR 22-24 S LS RoHS : Compliant |
| 0 | ||
| R51-1RE..S00271837 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 7-1616271-8 | TE Connectivity | TE Connectivity 37149001=BASE-MAIN |
| 0 | ||
| 3-2842271-8 | TE Connectivity | Board to Board & Mezzanine Connectors 38P,2MM,SHRD HDR,DRRT,0.38AU,TR RoHS : Compliant | 0 | |||
| 5-1372718-9 | TE Connectivity | CUTTING BLADE | 0 | |||
![]() TME | 1-2271888-4 | TE Connectivity | Connector: wire-board; male; data; Inom: 3A; PIN: 28; shrouded; 2mm RoHS : Compliant |
| 1,500 | |
| 1-2271888-5 | TE Connectivity | Connector: wire-board; male; data; Inom: 3A; PIN: 30; shrouded; 2mm RoHS : Compliant |
| 1,120 | ||
| 2271849-1 | TE Connectivity | Splice terminal: rail; 600V; spring clamp |
| 500 | ||
| 2718600000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; power supply |
| 100 | ||
| 502718 | LEDLENSER | Torch: LED headtorch; IP54; 20lm,100lm,200lm,400lm; 20h |
| 3 | ||
| 2-2271861-1 | TE Connectivity | Connector: wire-wire; Automotive |
| 2 | ||
| 10027188 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; data; PIN: 5; SMT; 1.5A; 125V |
| 0 | ||
| 1927180500 | Weidmüller Interface GmbH & Co. KG | Cable: for sensors; M8; PIN: 4; male,female; plug; Inom: 4A; SAI; PVC RoHS : Compliant |
| 0 | ||
| 0022718 | Lapp Group | Wire; ÖLFLEX® ROBUST 215C; 3G0.75mm2; black; 300V,500V; CPR: Fca RoHS : Compliant |
| 0 | ||
| 10027189 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; data; PIN: 6; SMT; 1.5A; 125V |
| 0 | ||
| 05022718001 | Wera | Wrench: hex key; inch,Hex Plus,spherical; HEX 3/8" |
| 0 | ||
| 10062718 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 6; THT; 3A; 100V |
| 0 | ||
| 102718 | MCI Transformer Corporation | Patch cord; F/UTP; Cat 6; RJ45 plug,RJ45 left angled plug; 10m |
| 0 | ||
| 1927180300 | Weidmüller Interface GmbH & Co. KG | Cable: for sensors; M8; PIN: 4; male,female; plug; Inom: 4A; SAI; PVC RoHS : Compliant |
| 0 | ||
| 17 X 2718 | OPTIBELT GmbH | Wedge belt |
| 0 | ||
![]() Interstate Connecting Components | 60271811SECOND1 | Amphenol PCD | 602GB | 0 | ||
| SA85002718905 | SOURIAU-SUNBANK | J38601 | 0 | |||
| PT06A-20-24PW(027)(180 | Amphenol Industrial Operations | PLUG | 0 | |||
| 1-1372718-4 | TE Connectivity | CUTTING BLADE | 0 | |||
| 10137927-1831LF | Amphenol FCi | 10137927-1831LF-MTK 3.0 18P DR RoHS : Unknown | 0 | |||
| MP-762127-1-8A | TE Connectivity | 8-1200603-9,F08497-000 RoHS : Compliant |
| 0 | ||
| HM-762127-1-8A | TE Connectivity | HM-762127-1-8A RoHS : Compliant | 0 | |||
| A927184001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCVERSAFLEX-08-8-SP RoHS : Compliant | 0 | |||
| OQ1271800300G | Amphenol Anytek | OQ-5.0- 12P GREY CONTACT WITH | 0 | |||
| TJ2271820000G | Amphenol Anytek | TJ - 5.0 - 22P GREY WITH FLANG | 0 | |||
| PT05SE-20-16SX(027)(18 | Amphenol Industrial Operations | PLUG | 0 | |||
| F27186-000 | TE Connectivity | CMC-0553-000-2 RoHS : Compliant | 0 | |||
| 7-1616271-8 | TE Connectivity | 37149001=BASE-MAIN |
| 0 | ||
| 8-1372718-6 | TE Connectivity | CUTTING BLADE COATED | 0 | |||
| 60271832PYCOND1 | Amphenol PCD | 602GB | 0 | |||
![]() NexGen Digital | 1827185 | Phoenix Contact | RoHS : Compliant | 937 | ||
![]() PEI Genesis | AT327-18 | Abbotec Incorporated |
| 76 | ||
| S2718-7724-1.5-12R | SOURIAU-SUNBANK |
| 0 | |||
| S85049/27-18W-229A | SOURIAU-SUNBANK |
| 0 | |||
| 505227-1806 | SOURIAU-SUNBANK |
| 0 | |||
| PT05SE16-26SW-027-180 | Amphenol Corporation |
| 0 | |||
| 2718-2 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| PT05SE20-16S-027-180 | Amphenol Corporation |
| 0 | |||
| J62718RA2 | SOURIAU-SUNBANK |
| 0 | |||
| J627-18L-13DS | SOURIAU-SUNBANK |
| 0 | |||
| 23A02718 | SOURIAU-SUNBANK |
| 0 | |||
| ATM327-18 | Abbotec Incorporated |
| 0 | |||
| 271-8430-702 | Dialight |
| 0 | |||
| S271-8W334 | SOURIAU-SUNBANK |
| 0 | |||
| 505227-1807 | SOURIAU-SUNBANK |
| 0 | |||
| S827-1812-1-1 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 62718-2 | TE Connectivity | Terminals RoHS : Compliant |
| 29,040 | |
| 1-2271875-0 | TE Connectivity | Connectors RoHS : Compliant |
| 2,607 | ||
| 4-2271897-0 | TE Connectivity | Connectors |
| 2,046 | ||
| 4-2271894-0 | TE Connectivity | Connectors |
| 1,841 | ||
| 1-2271888-0 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1,445 | ||
| 1-2271888-4 | TE Connectivity | TE COMPONENT (REF 1-2271888-4) RoHS : Compliant |
| 990 | ||
| 1-2271888-5 | TE Connectivity | TE COMPONENT (REF 1-2271888-5) RoHS : Compliant |
| 739 | ||
| 1-2324271-8 | TE Connectivity | connector accessories RoHS : Compliant |
| 253 | ||
| 77311-127-18LF | Amphenol FCi | Cable Assembly RoHS : Unknown |
| 115 | ||
| TSW-127-18-G-S | Samtec Inc | PCB Header, 2.54mm Pitch, Through-Hole, RoHS : Compliant |
| 73 | ||
| AT327-18 | Abbotec Incorporated | NUTPLATE 3/4 SZ 18 THRD 4-40 |
| 50 | ||
| 10-580927-183 | Amphenol Corporation | Connector |
| 17 | ||
| 1-1410271-8 | TE Connectivity | Backplane Connectors RoHS : Compliant |
| 14 | ||
| 271847-000 | TE Connectivity | connector accessories |
| 5 | ||
| D52718-000 | TE Connectivity | connector accessories RoHS : Not Compliant |
| 2 | ||
![]() Richardson RFPD | FP2327-18DP | Amphenol PCTEL | Dual-Polarized Directional Panel Antennas RoHS : Compliant | 0 | ||
| SI5338M-B02718-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 200MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| SI5338M-B02718-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 200MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| K319002718SK0J140 | Kendeil srl | FILM CAPACITOR RoHS : Compliant | 0 | |||
| 960-27-18-F-AB-0 | Wakefield-Vette | BOARDLEVEL HEAT SINK RoHS : Compliant |
| 0 | ||
| 960-27-18-D-AB-0 | Wakefield-Vette | BOARDLEVEL HEAT SINK RoHS : Compliant |
| 0 | ||
| DC2718A | Analog Devices Inc | LT8316 DC to DC Controller 11.4VDC to 12.6VDC Outp RoHS : Compliant |
| 0 | ||
| RP327-180-1000-S | Astrodyne TDI Power Supplies & EMI Filters | Bookshelf, 3-Phase Delta Dual Stage Power Line Fil RoHS : Not Compliant | 0 | |||
| K3190027180K0J140 | Kendeil srl | FILM CAPACITOR RoHS : Compliant | 0 | |||
| SI5345A-D12718-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| K329002718SK0J140 | Kendeil srl | FILM CAPACITOR RoHS : Compliant | 0 | |||
| K3290027180K0J140 | Kendeil srl | FILM CAPACITOR RoHS : Compliant | 0 | |||
| 960-27-18-S-AB-0 | Wakefield-Vette | BOARDLEVEL HEAT SINK RoHS : Compliant |
| 0 | ||
| R412718124 | Radiall | Attenuator 6GHz RoHS : Not Compliant |
| 0 | ||
| SI5345A-D12718-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | 1-1627183-0 | TE Connectivity | INSTOCK | 3,000 | ||
| VP27186-2 | VLSI Solution | INSTOCK | 150 | |||
| VP271863 | INSTOCK | 136 | ||||
| VP271862 | VLSI Solution | INSTOCK | 110 | |||
| 88LX2718-A1-NAX2C000 | Marvell Technology Group Ltd | INSTOCK | 103 | |||
![]() Avnet Abacus | 1827185 | Phoenix Contact | Pluggable Terminal Block 381 mm 8 Ways 28 AWG 16 AWG 15 mm Screw (Alt: 1827185) RoHS : Compliant | 50 | ||
| 2132271810 | Molex | Connector Wire to Board CLIKMate Receptacle Dual Row 18 Position 15mm Straight Surface Mount Natu - Tape and Reel (Alt: 2132271810) RoHS : Compliant | 0 | |||
| A927184001 | TE Connectivity | (Alt: A927184001) RoHS : Compliant | 0 | |||
| A927184001 | TE Connectivity | (Alt: A927184001) RoHS : Compliant | 0 | |||
| 1727185112 | Molex | (Alt: 1727185112) RoHS : Compliant | 0 | |||
| 1727185121 | Molex | - Tape and Reel (Alt: 1727185121) RoHS : Compliant | 0 | |||
| 1727185121 | Molex | (Alt: 1727185121) RoHS : Compliant | 0 | |||
| 1-2324271-8 | TE Connectivity | IC Component Socket 2097 Contacts LGA Socket Copper Alloy (Alt: 1-2324271-8) RoHS : Compliant | 0 | |||
| 1-1410271-8 | TE Connectivity | (Alt: 1-1410271-8) RoHS : Compliant | 0 | |||
| 1-2271888-4 | TE Connectivity | (Alt: 1-2271888-4) RoHS : Compliant | 0 | |||
| B32718H8506K | TDK Corporation | Power Film Capacitor 50 uF 800 V 10 Metallized PP Radial Box 4 Pin Through Hole (Alt: B32718H8506K000) RoHS : Compliant | 0 | |||
| OQ1271800300G | Amphenol Corporation | (Alt: OQ1271800300G) RoHS : Compliant | 0 | |||
| TJ2271820000G | Amphenol Corporation | (Alt: TJ2271820000G) RoHS : Compliant | 0 | |||
| EM0271800600G | Amphenol Corporation | (Alt: EM0271800600G) RoHS : Compliant | 0 | |||
| SMC12.7184J250B31TR24 | KEMET Corporation | General Purpose Film Capacitor Metallized PPS 5045 127114 Metric 018 uF 5 160 V 250 V - Tape and Reel (Alt: SMC12.7184J250B31TR24) RoHS : Compliant | 0 | |||
![]() Avnet Asia | KFGE27-18-A380G3A | Amphenol Corporation | (Alt: KFGE27-18-A380G3A) RoHS : Compliant |
| 540 | |
| WSC692718R20FEK | Vishay Intertechnologies | (Alt: WSC692718R20FEK) RoHS : Compliant | 0 | |||
| 12402718E512A | Amphenol Corporation | (Alt: 12402718E512A) RoHS : Compliant | 0 | |||
| KFGE27-18-A440G3A | Amphenol Corporation | AHLKFGE27-18-A440G3A CABLE OSFP224 OVERP (Alt: KFGE27-18-A440G3A) RoHS : Compliant | 0 | |||
| 1727185111 | Molex | (Alt: 1727185111) RoHS : Compliant | 0 | |||
| KFGE27-18-A305GCA | Amphenol Corporation | AHLKFGE27-18-A305GCA OSFP224 OVERPASS RH (Alt: KFGE27-18-A305GCA) RoHS : Compliant | 0 | |||
| KFGE27-18-A350GCA | Amphenol Corporation | AHLKFGE27-18-A350GCA CABLE OSFP224 OVERP (Alt: KFGE27-18-A350GCA) RoHS : Compliant | 0 | |||
| MMIC271809T4063C0300 | TDK Invensense | IVSMMIC271809T4063C0300 MEMS MIC T4063 1 (Alt: MMIC271809T4063C0300) RoHS : Compliant | 0 | |||
| KFGE27-18-A305G12 | Amphenol Corporation | AHLKFGE27-18-A305G12 CABLE OSFP224 OVERP (Alt: KFGE27-18-A305G12) RoHS : Compliant | 0 | |||
| KFGE27-18-A440G6A | Amphenol Corporation | AHL KFGE27-18-A440G6A CABLE OSFP224 OVER (Alt: KFGE27-18-A440G6A) RoHS : Compliant | 0 | |||
| KFGE27-18-A280GCA | Amphenol Corporation | AHLKFGE27-18-A280GCA CABLE OSFP224 OVERP (Alt: KFGE27-18-A280GCA) RoHS : Compliant | 0 | |||
| KFGE27-18-A440E3A | Amphenol Corporation | AHLKFGE27-18-A440E3A CABLE OSFP224 OVERP (Alt: KFGE27-18-A440E3A) RoHS : Compliant | 0 | |||
| 1727186121 | Molex | (Alt: 1727186121) RoHS : Compliant | 0 | |||
| 62718-1 | TE Connectivity | Quick Disconnect Terminal 18-22AWG RCP 13.71mm Strip (Alt: 62718-1) RoHS : Compliant | 0 | |||
| KFGE27-18-A305E12 | Amphenol Corporation | AHLKFGE27-18-A305E12 CABLE OSFP224 OVERP (Alt: KFGE27-18-A305E12) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MCP1827-1802E/ET![]() | Microchip Technology Inc | LDO Regulator Pos 18V 15A 6Pin5Tab DDPAK (Alt: MCP1827-1802E/ET) RoHS : Compliant | 0 | ||
MCP1727-1802E/SN![]() | Microchip Technology Inc | LDO Regulator Pos 18V 15A 8Pin SOIC N (Alt: MCP1727-1802E/SN) RoHS : Compliant | 0 | |||
MCP1827-1802E/AT![]() | Microchip Technology Inc | LDO Regulator Pos 18V 15A 5Pin5Tab TO220 (Alt: MCP1827-1802E/AT) RoHS : Compliant | 0 | |||
MCP1727-1802E/MF![]() | Microchip Technology Inc | LDO Regulator Pos 18V 15A 8Pin DFN EP (Alt: MCP1727-1802E/MF) RoHS : Compliant | 0 | |||
| MIC5327-1.8YMT-TR | Microchip Technology Inc | (Alt: MIC5327-1.8YMT-TR) RoHS : Compliant | 0 | |||
| 88LX2718A1-NAX2C000 | MaxLinear Inc | QFN32 Network Controller (Alt: 88LX2718A1-NAX2C000) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 271-866K/REEL | Xicon Passive Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,978 | |
| CDRH127-181MC | Sumida Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 500 | ||
| 271-8.06K | Xicon Passive Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 165 | ||
| 1827185 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 99 | ||
| 27.02718.381 | Isheng Electronics | IN STOCK SHIP TODAY |
| 63 | ||
| 27.02718.401 | Isheng Electronics | IN STOCK SHIP TODAY |
| 63 | ||
| MS27183-3 | IN STOCK SHIP TODAY | 16 | ||||
| M55302/27-185 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 7 | ||
| SG-51PT-27.1880MC | Seiko Epson Corporation | IN STOCK SHIP TODAY | 5 | |||
| 3002-7188-10 | Omnivision Technologies Inc | IN STOCK SHIP TODAY | 1 | |||
![]() DB Roberts | PNZ2718 | The Ohio Nut And Bolt Co |
| 6,000 | ||
| MS27183-8 | Military Specifications |
| 3,930 | |||
| MS27183-46 | Military Specifications |
| 3,000 | |||
| MS27183-3 | Military Specifications |
| 1,865 | |||
| MS27183-6 | Military Specifications |
| 1,050 | |||
| MS27183-45 | Military Specifications |
| 51 | |||
| MS27183-27 | Military Specifications |
| 3 | |||
| 2718 | Heyco | DD 1109-1000 WHITE | 0 | |||
| 10582718 | Essentra Components | 0 | ||||
| RFS2-27-18-A5 | Essentra Components | 0 | ||||
| E3-127-181 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 62-927-18 | Southco | 0 | ||||
| E3-127-1812 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 5827-S-627-188-506 | RAF Electronic Hardware | 0 | ||||
| 2271-832-N | RAF Electronic Hardware | STANDARD NYLON FEMALE FEMALE STANDOFF | 0 | |||
![]() EBV Elektronik | MCP1727-1802E/MF![]() | Microchip Technology Inc | LDO Regulator Pos 18V 15A 8Pin DFN EP (Alt: MCP1727-1802E/MF) RoHS : Compliant | 0 | ||
![]() FDH Electronics | M85049/27-18N | Amphenol PCD | Connector Acc |
| 461 | |
| M85049/27-18W | Amphenol PCD | Connector Acc |
| 403 | ||
| M85049/27-18W | SPI Connects | Backshells & Ac | 100 | |||
| 381A302-71/86-0 | TE Connectivity | Heat Shrink Prd RoHS : Compliant |
| 91 | ||
| M85049/27-18N | Glenair Inc | Backshells & Ac RoHS : Compliant | 65 | |||
| M85049/27-18W | Glenair Inc | Backshells & Ac RoHS : Not Compliant | 26 | |||
| M85049/27-18N | SOURIAU-SUNBANK | Connector Acc |
| 12 | ||
| 527-182NFP6A10B10C06 | Glenair Inc | Backshells & Ac | 4 | |||
| 527-182NFP6H06J10K10 | Glenair Inc | Backshells & Ac | 3 | |||
| 527-182NFP6A08B04C04 | Glenair Inc | Backshells & Ac |
| 3 | ||
| M85049/27-18N | SPI Connects | Backshells & Ac | 0 | |||
| 83452718 | Crouzet | Switches | 0 | |||
| 85227186177 | SOURIAU-SUNBANK | Connector 26482 | 0 | |||
| J627-18RA-2 | SOURIAU-SUNBANK | Backshells & Ac |
| 0 | ||
![]() Maritex | 1727181111 | Molex | Rectangular Connector Contacts; 1727181111; MOLEX; Tin; 16 AWG RoHS : Compliant |
| 3,138 | |
![]() Pasternack Enterprises US | PE3W06027-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA male to SMA male cable 18 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 18 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has male gender on end 1 and male on end 2. PE3W06027-18 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.050 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to SMA plug cable assembly PE3W06027-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3W06027-18 RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 285 | |
| PE3W16427-180CM | Pasternack Enterprises |
| 150 | |||
| PE3W08827-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male Right Angle to SMA Male Cable 18 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly SMA male right angle to SMA male cable 18 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male cable 18 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W08827-18 can also be known as a right angle SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W08827-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08827-18 can also be used in the other direction and will be SMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male cable 18 inch length using PE-SR402FLJ coax. |
| 126 | ||
| PE3M0127-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 18 inches. Temperature Conditioned SMA Male to SMA Female Bulkhead Low Loss Cable 18 Inch Length Using PE-P142LL Coax., Pasternack temperature conditioned SMA male to SMA female bulkhead low loss cable 18 inch length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0127-18 is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability SMA to SMA cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with SMA connection on one end and SMA connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly. PE3M0127-18 can also be known as a temperature conditioned low loss SMA plug to SMA jack cable assembly and will be shipped the same day after it is purchased. SMA plug to SMA jack cable assembly PE3M0127-18 is built with PE-P142LL which is a flexible coax. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency SMA male to SMA female cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0127-18 can be used in the other direction and will be SMA female to SMA male cable assembly. Pasternack high reliability low loss SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for same-day shipment worldwide. Variations of PE44826 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned SMA male to SMA female bulkhead low loss cable 18 inch length using PE-P142LL coax. |
| 13 | ||
| PE3W13027-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMP Female Cable 18 Inch Length Using RG405 Coax., Radio frequency assembly SMA male to SMP female cable 18 inch length using RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable 18 inch length using RG405 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMP cable connection on the other. Our SMA to SMP cable assemblies have a male gender on end 1 and female on end 2. PE3W13027-18 can also be known as a SMA plug to SMP jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMP jack cable assembly PE3W13027-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13027-18 can also be used in the other direction and will be SMP female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMP female cable 18 inch length using RG405 coax. |
| 0 | ||
| PE3C2718/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male Right Angle to N Female Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly BNC male right angle to N female low loss cable 12 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male right angle to N female low loss cable 12 inch length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle BNC cable connection on one end and a type N cable connection on the other. Our low loss right angle BNC to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C2718/HS-12 can also be known as a low loss right angle BNC plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2718/HS-12 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our right angle BNC male to type N female cable has a maximum VSWR of 1.4:1. BNC plug to type N jack cable assembly PE3C2718/HS-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2718/HS-12 can also be used in the other direction and will be a type N female to right angle BNC male cable assembly if the opposite connectivity is required. Low loss BNC right angle plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W12718 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. N Male to SMB Jack Cable Using PE-C100-LSZH Coax. PE3W12718 is a N male to SMB jack cable using PE-C100-LSZH coax. This Pasternack N male to SMB jack cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMB for connector 2. Our male N to jack SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12718 N male to SMB jack cable assembly is constructed with PE-C100-LSZH coax. | 0 | |||
| PE3C2718/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to N Female Low Loss Cable Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly BNC male right angle to N female low loss cable using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male right angle to N female low loss cable using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle BNC cable connection on one end and a type N cable connection on the other. Our low loss right angle BNC to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C2718/HS can also be known as a low loss right angle BNC plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2718/HS RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our right angle BNC male to type N female cable has a maximum VSWR of 1.4:1. BNC plug to type N jack cable assembly PE3C2718/HS is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2718/HS can also be used in the other direction and will be a type N female to right angle BNC male cable assembly if the opposite connectivity is required. Low loss BNC right angle plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3827-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 18 inches. N Male to N Male Cable 18 Inch Length Using RG402 Coax., Radio frequency assembly N male to N male cable 18 inch length using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 18 inch length using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our type N to N type cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3827-18, can also be known as a type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3827-18 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 18 inch length using RG402 coax. |
| 0 | ||
| PE3C2718 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Female to BNC Male Right Angle Cable Using LMR-2. PE3C2718 is a N female to BNC male right angle cable using LMR-240-UF coax. This Pasternack N female to BNC male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. N to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N to male BNC right angle cable assembly uses a ultra flexible cable type that is 50 Ohm. Pasternack PE3C2718 N female to BNC male right angle cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3M0027-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 18 inches. MIL-DTL-17 SMA Male Right Angle to TNC Male Cable 18 Inch Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 SMA male right angle to TNC male cable 18 inch length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male right angle to TNC male cable 18 inch length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/56-3109 SMA to M39012/26-0011 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle M39012/56-3109 SMA cable connection on one end and M39012/26-0011 TNC cable connection on the other. Our right angle M39012/56-3109 SMA to M39012/26-0011 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/56-3109 SMA to M39012/26-0011 TNC cable is a male to male coax assembly, PE3M0027-18, can also be known as a MIL-DTL-17/MIL-C-17 right angle M39012/56-3109 SMA plug to M39012/26-0011 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/56-3109 SMA plug to M39012/26-0011 TNC plug cable assembly PE3M0027-18 is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/56-3109 SMA cable assembly is manufactured with right angle M39012/56-3109 SMA to M39012/26-0011 TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/56-3109 SMA right angle male to M39012/26-0011 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0027-18 can also be used in the other direction and will be M39012/26-0011 TNC male to right angle M39012/56-3109 SMA male cable assembly if the opposite connectivity is required. M39012/56-3109 SMA right angle plug to M39012/26-0011 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/56-3109 SMA to M39012/26-0011 TNC cable assembly for quick shipment worldwide. Variations of M39012/56-3109 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male right angle to TNC male cable 18 inch length using M17/60-RG142 coax. |
| 0 | ||
| PE3W22718/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to Reverse Polarity SMA Male Cable Using LMR-100A-UF Coax with HeatShrink. PE3W22718/HS is a reverse polarity TNC male to reverse polarity SMA male cable using LMR-100A-UF coax. This Pasternack reverse polarity TNC male to reverse polarity SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity male TNC to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22718/HS TNC reverse polarity male to SMA reverse polarity male cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W02718 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. SMA Male to 2.92mm Male Cable Using PE-SR402AL Coax. PE3W02718 is a SMA male to 2.92mm male cable using PE-SR402AL coax. This Pasternack SMA male to 2.92mm male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 2.92mm for connector 2. Our male SMA to male 2.92mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W02718 SMA male to 2.92mm male cable assembly is constructed with PE-SR402AL coax. | 0 | |||
| PE39427-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to SMA Female Bulkhead Semi-Flexible Precision Cable 18 Inch Length Using PE-SR402FL Coax, LF Solder, RoHS., Radio frequency assembly SMA male to SMA female bulkhead semi-flexible precision cable 18 inch length using PE-SR402FL coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead semi-flexible precision cable 18 inch length using PE-SR402FL coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our precision SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE39427-18, can also be known as a precision SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE39427-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39427-18 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Precision SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead semi-flexible precision cable 18 inch length using PE-SR402FL coax, LF solder, RoHS. |
| 0 | ||
| PE3C2718/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male Right Angle to N Female Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly BNC male right angle to N female low loss cable 60 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male right angle to N female low loss cable 60 inch length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle BNC cable connection on one end and a type N cable connection on the other. Our low loss right angle BNC to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C2718/HS-60 can also be known as a low loss right angle BNC plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2718/HS-60 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our right angle BNC male to type N female cable has a maximum VSWR of 1.4:1. BNC plug to type N jack cable assembly PE3C2718/HS-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2718/HS-60 can also be used in the other direction and will be a type N female to right angle BNC male cable assembly if the opposite connectivity is required. Low loss BNC right angle plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
![]() TE Connectivity | 1742718-1 | TE Connectivity | 250 FASTON,FLAG,REC.,16-12 AWG,TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 16 – 12 AWG Wire Size: 1.31 – 3.31 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 16 – 12 AWG 1.31 – 3.31 mm² | Quick Disconnect | Part Number: 1742718-1 | Internal Number: 1742718-1 | TE Connectivity RoHS : Compliant |
| 178,969 | |
| 62718-2 | TE Connectivity | 250 FASTON FLAG REC 22-18 AWG TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 22 – 18 AWG Wire Size: .32 – .82 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 22 – 18 AWG .32 – .82 mm² | Quick Disconnect | Part Number: 62718-2 | Internal Number: 62718-2 | TE Connectivity RoHS : Compliant |
| 130,257 | ||
| 62718-1 | TE Connectivity | 250 FASTON FLAG REC 22-18 AWG BR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 22 – 18 AWG Wire Size: .32 – .82 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 22 – 18 AWG .32 – .82 mm² | Quick Disconnect | Part Number: 62718-1 | Internal Number: 62718-1 | TE Connectivity RoHS : Compliant |
| 71,283 | ||
| 381A302-71/86-0 | TE Connectivity | 381A302-71/86-0 Molded Part Shape: Y Shape Number of Branches: 3 Material Code: 71 Material Systems Code: 10 Adhesive Requirement: Adhesive Precoat Y Shape 3 71 10 | Heat Shrinkable Cable Breakout And Cable Transition | Part Number: 381A302-71/86-0 | Internal Number: 202817-000 | Alias Number: 5-1191470-0 | TE Connectivity RoHS : Compliant |
| 146 | ||
| 1-2271888-0 | TE Connectivity | DYNAMIC 1100D HDR ASSY H 40P XBLACK TIN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 40 Number of Rows: 2 PCB Mount Header Horizontal Wire-to-Board 40 | PCB Header & Receptacle | Part Number: 1-2271888-0 | Internal Number: 1-2271888-0 | TE Connectivity RoHS : Compliant |
| 120 | ||
![]() Vyrian | 2718688 | Phoenix Contact | Connector Sub-assemblies RoHS : Compliant | 13,315 | ||
| 301A512-71/86-0 | TE Connectivity | HEAT SHRINK BOOT, 34.3 ID Before Shrink RoHS : Compliant | 12,190 | |||
| 2718073 | Phoenix Contact | Modular Terminal Block, 24A, 4mm2, 1 Row(s), 4 Deck(s) RoHS : Compliant | 11,997 | |||
| 1827185 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 10,348 | |||
| 2882718 | Phoenix Contact | Surge Arrestors RoHS : Compliant | 10,118 | |||
| 2718206 | Phoenix Contact | Modular Terminal Block, 24A, 4mm2, 4 Row(s), 4 Deck(s) RoHS : Compliant | 9,821 | |||
| MEGARAID SAS 9271-8I | Broadcom Limited | 9,443 | ||||
| HM-762127-1-8A | TE Connectivity | Labeling Materials RoHS : Compliant | 8,223 | |||
MCP1827-1802E/ET![]() | Microchip Technology Inc | Fixed Positive LDO Regulator, 1.8V, 0.6V Dropout, CMOS, PSSO5 RoHS : Compliant | 7,973 | |||
| CT132718 | Micron Technology, Inc | 6,467 | ||||
| DC2718A | Analog Devices Inc | RoHS : Compliant | 5,059 | |||
| 2718015 | Phoenix Contact | Modular Terminal Block, 26A, 4mm2, 1 Row(s), 4 Deck(s) RoHS : Compliant | 4,905 | |||
| LMH2110TMX-S7002718 | Texas Instruments | 3,745 | ||||
| TPS72718YFFEVM-407 | Texas Instruments | 3,041 | ||||
| 1010027182 | Amphenol Corporation | PCB Connector, 8 Contact(s), 2 Row(s), Female, Right Angle, 0.1 inch Pitch, Surface Mount Terminal, Locking, Black Insulator | 237 | |||
![]() Win Source Electronics | RK2718B-M | Rockchip Electronics Co Ltd |
| 3,810 | ||
| 2027180100 | Molex | CONN QSFD DD RCPT 76P SLD RA SMD RoHS : Compliant |
| 337 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |