2500000023 Price, Distributor, Stock

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Plenum Snap-On 4.3-10 Male to SMA Male Right Angle Low PIM Cable 200 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum snap-on 4.3-10 male to SMA male right angle low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum snap-on 4.3-10 male to SMA male right angle low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-SM-RA-LP SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310MS-LP 4.3-10 cable connection on one end and right angle TC-SPP250-SM-RA-LP SMA cable connection on the other. Our low PIM TC-SPP250-4310MS-LP 4.3-10 to right angle TC-SPP250-SM-RA-LP SMA cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-SM-RA-LP SMA cable is a male to male coax assembly, PE3C6250-200CM, can also be known as a low PIM TC-SPP250-4310MS-LP 4.3-10 plug to right angle TC-SPP250-SM-RA-LP SMA plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-SM-RA-LP SMA plug cable assembly PE3C6250-200CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310MS-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310MS-LP 4.3-10 to right angle TC-SPP250-SM-RA-LP SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310MS-LP 4.3-10 male to TC-SPP250-SM-RA-LP SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6250-200CM can also be used in the other direction and will be right angle TC-SPP250-SM-RA-LP SMA male to TC-SPP250-4310MS-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-SM-RA-LP SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-SM-RA-LP SMA cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310MS-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum snap-on 4.3-10 male to SMA male right angle low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts.

1 : $163.99
25 : $155.79
50 : $147.59
100 : $141.03

PE3C6250-60

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 60 inches. Plenum Snap-On 4.3-10 Male to SMA Male Right Angle Low PIM Cable 60 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum snap-on 4.3-10 male to SMA male right angle low PIM cable 60 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum snap-on 4.3-10 male to SMA male right angle low PIM cable 60 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-SM-RA-LP SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310MS-LP 4.3-10 cable connection on one end and right angle TC-SPP250-SM-RA-LP SMA cable connection on the other. Our low PIM TC-SPP250-4310MS-LP 4.3-10 to right angle TC-SPP250-SM-RA-LP SMA cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-SM-RA-LP SMA cable is a male to male coax assembly, PE3C6250-60, can also be known as a low PIM TC-SPP250-4310MS-LP 4.3-10 plug to right angle TC-SPP250-SM-RA-LP SMA plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-SM-RA-LP SMA plug cable assembly PE3C6250-60 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310MS-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310MS-LP 4.3-10 to right angle TC-SPP250-SM-RA-LP SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310MS-LP 4.3-10 male to TC-SPP250-SM-RA-LP SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6250-60 can also be used in the other direction and will be right angle TC-SPP250-SM-RA-LP SMA male to TC-SPP250-4310MS-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-SM-RA-LP SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-SM-RA-LP SMA cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310MS-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum snap-on 4.3-10 male to SMA male right angle low PIM cable 60 inch length using SPP-250-LLPL coax using Times Microwave parts.

1 : $147.99
25 : $140.59
50 : $133.19
100 : $127.27

TC-SPP250-716M-LP

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: 7/16 DIN, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: SPP-250-LLPL, Interface Type 2: SPO-250, Interface Type 3: SPF-250. 7/16 DIN Male Low PIM Connector Solder Attachment for SPP-250-LLPL, SPO-250, SPF-250. TC-SPP250-716M-LP 7/16 DIN male coaxial connector has an interface type of SPP-250-LLPL, SPO-250, SPF-250 and a 50 Ohm impedance. Pasternack 7/16 DIN male connector uses shield/contact solder/solder as an attachment method. Our male 7/16 DIN coaxial connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack 7/16 DIN male coaxial connector has a PTFE dielectric type and a VSWR of 1.35. The Pasternack 7/16 DIN coaxial connector has a brass body with tri-metal plating. Our TC-SPP250-716M-LP 7/16 DIN connector uses brass contact. This 7/16 DIN male coaxial RF connector is RoHS and REACH compliant. This Pasternack male 7/16 DIN connector will ship the same day as purchased. Our 7/16 DIN male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 7/16 DIN connector cable assemblies that will ship the same day as well.

1 : $17.59
25 : $16.89
50 : $16.36
100 : $16.01

PE372-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P102, RF Cable Type: PE-P102, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. 1.85mm Male to 1.85mm Male Test Cable 50 cm Length Using PE-P102 Coax., Radio frequency assembly 1.85mm male to 1.85mm male test cable 50 cm length using PE-P102 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male test cable 50 cm length using PE-P102 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax test cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our test 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE372-50CM, can also be known as a test 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE372-50CM is built with PE-P102 which is a flexible coax type. The Pasternack flexible 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 60 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Test 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male test cable 50 cm length using PE-P102 coax.

1 : $315.99
25 : $300.19
50 : $284.39
100 : $271.75

PE3C2503LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to Reverse Polarity SMA Male Cable Using LMR-195 Coax, RoHS. PE3C2503LF is a reverse polarity SMA male to reverse polarity SMA male cable using LMR-195 coax. This Pasternack reverse polarity SMA male to reverse polarity SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity male SMA to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2503LF SMA reverse polarity male to SMA reverse polarity male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C5852-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.1/9.5 Mini DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Plenum 4.1/9.5 Mini DIN Male Right Angle to 4.1/9.5 Mini DIN Male Right Angle Low PIM Cable 50 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.1/9.5 mini DIN male right angle to 4.1/9.5 mini DIN male right angle low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.1/9.5 mini DIN male right angle to 4.1/9.5 mini DIN male right angle low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.1/9.5 mini DIN cable connection on one end and right angle 4.1/9.5 mini DIN cable connection on the other. Our low PIM right angle 4.1/9.5 mini DIN to right angle 4.1/9.5 mini DIN cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable is a male to male coax assembly, PE3C5852-50CM, can also be known as a low PIM right angle 4.1/9.5 mini DIN plug to right angle 4.1/9.5 mini DIN plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN plug cable assembly PE3C5852-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with right angle 4.1/9.5 mini DIN to right angle 4.1/9.5 mini DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN right angle male to 4.1/9.5 mini DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 4.1/9.5 mini DIN right angle plug to 4.1/9.5 mini DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male right angle to 4.1/9.5 mini DIN male right angle low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder.

1 : $197.99
25 : $188.09
50 : $178.19

PE3C8392-50CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 2.2-5 Male to N Female Bulkhead Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 2.2-5 male to N female bulkhead low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.2-5 male to N female bulkhead low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM 2.2-5 to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8392-50CM can also be known as a low PIM 2.2-5 plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.748-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 2.2-5 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8392-50CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 2.2-5 male to bulkhead type N female cable has a maximum VSWR of 1.4:1. 2.2-5 plug to type N jack cable assembly PE3C8392-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 2.2-5 cable assembly is manufactured with 2.2-5 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8392-50CM can also be used in the other direction and will be a type N female bulkhead to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to type N cable assembly for quick shipment worldwide. Variations of 2.2-5 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to type N low PIM RF cable assembly as per your requirements.

1 : $83.99
25 : $79.79
50 : $75.59
100 : $72.23

PE3W02172-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. SMA Male to TNC Female Bulkhead Low Loss Cable 50 CM Length Using LMR-195 Coax., Radio frequency assembly SMA male to TNC female bulkhead low loss cable 50 cm length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to TNC female bulkhead low loss cable 50 cm length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and TNC bulkhead cable connection on the other. Our low loss SMA to TNC cable assemblies have a male gender on end 1 and female on end 2. This SMA to TNC cable is a male to female coax assembly, PE3W02172-50CM, can also be known as a low loss SMA plug to TNC jack cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC jack cable assembly PE3W02172-50CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02172-50CM can also be used in the other direction and will be TNC female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC female bulkhead low loss cable 50 cm length using LMR-195 coax.

1 : $59.99
25 : $56.99
50 : $53.99
100 : $51.59

PE3W05250

Pasternack Enterprises

Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. HN Male to SHV Plug Cable Using RG400 Coax. PE3W05250 is a HN male to SHV plug cable using RG400 coax. This Pasternack HN male to SHV plug cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm SHV for connector 2. Our male HN to plug SHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05250 HN male to SHV plug cable assembly is constructed with RG400 coax.

PE3W22503

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. MCX Jack to BNC Male Right Angle Cable Using RG174 Coax. PE3W22503 is a MCX jack to BNC male right angle cable using RG174 coax. This Pasternack MCX jack to BNC male right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm BNC for connector 2. MCX to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack MCX to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22503 MCX jack to BNC male right angle cable assembly is constructed with RG174 coax.

PE3W25014

Pasternack Enterprises

PE3W25096

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. SMA Female to SMA Female Bulkhead Cable Using LMR-240 Coax. PE3W25096 is a SMA female to SMA female bulkhead cable using LMR-240 coax. This Pasternack SMA female to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25096 SMA female to SMA female bulkhead cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.

TC-250-4310F-LP

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: 4.3-10, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: SPP-250-LLPL, Interface Type 2: SPF-250, Interface Type 3: SPO-250, Interface Type 4: 1/4" Superflexible, Interface Type 5: PE-1/4SFHC. 4.3-10 Female Low PIM Connector Solder Attachment for SPP-250-LLPL, SPF-250, SPO-250, 1/4" Superflexible, PE-1/4SFHC. TC-250-4310F-LP 4.3-10 female coaxial connector has an interface type of 4.3-10 female SPP-250-LLPL, SPF-250, SPO-250, 1/4" Superflexible, PE-1/4SFHC and a 50 Ohm impedance. Pasternack 4.3-10 female connector uses shield/contact solder/solder as an attachment method. Our female 4.3-10 coaxial connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack 4.3-10 female coaxial connector has a PTFE dielectric type and a VSWR of 1.35. The Pasternack 4.3-10 coaxial connector has a brass body with tri-metal plating. Our TC-250-4310F-LP 4.3-10 connector uses phosphor bronze contact. This 4.3-10 female coaxial RF connector is RoHS and REACH compliant. This Pasternack female 4.3-10 connector will ship the same day as purchased. Our 4.3-10 female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 4.3-10 connector cable assemblies that will ship the same day as well.

1 : $23.84
25 : $22.89
50 : $22.17
100 : $21.69

PE3C2503LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to Reverse Polarity SMA Male Cable Using LMR-195 Coax with HeatShrink, LF Solder. PE3C2503LF/HS is a reverse polarity SMA male to reverse polarity SMA male cable using LMR-195 coax. This Pasternack reverse polarity SMA male to reverse polarity SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity male SMA to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2503LF/HS SMA reverse polarity male to SMA reverse polarity male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C8250-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. 4.3-10 Male Right Angle to 7/16 DIN Female 4 Hole Flange Low PIM Cable 150 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 150 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 150 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.3-10 cable connection on one end and 7/16 DIN 4 hole flange cable connection on the other. Our low PIM right angle 4.3-10 to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This 4.3-10 to 7/16 DIN cable is a male to female coax assembly, PE3C8250-150CM, can also be known as a low PIM right angle 4.3-10 plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 7/16 DIN jack cable assembly PE3C8250-150CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 right angle male to 7/16 DIN female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8250-150CM can also be used in the other direction and will be 7/16 DIN female 4 hole flange to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 150 cm length using TFT-402 coax using Times Microwave components.

1 : $101.99
25 : $96.89
50 : $91.79
100 : $87.71

TE Connectivity

640250-8

TE Connectivity

08P SL156 HSG W/LCK RAMP NATL Number of Positions: 8 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Mating Retention Type: Locking Ramp Receptacle Housing: Wire-To-Board & With Mating Alignment & Sl156 | 8 Receptacle Housing With | Part Number: 640250-8 | Internal Number: 640250-8 | Alias Number: 042-1128-00 | TE Connectivity
RoHS : Compliant

2,500 : $0.6
1,000 : $0.69
500 : $0.79
250 : $0.82
100 : $0.94
50 : $1.03
25 : $1.1
10 : $1.23
1 : $1.36

22,459

55PC1121-20-2/6-9CS2502

TE Connectivity

55PC1121-20-2/6-9CS2502 Cable Type: Spec 55 Operating Voltage: 600 VAC Wire & Cable Insulation Material: Modified Radiation Cross-linked ETFE Polymer Conductor Material: Tin-Coated Copper Wire Size: 20 AWG Spec 55 600 VAC Modified Radiation Cross-linked ETFE Polymer Tin-Coated Copper | Twisted Pair Cabling | Part Number: 55PC1121-20-2/6-9CS2502 | Internal Number: 169161-000 | Alias Number: 5-1191231-2 | 20 AWG
RoHS : Compliant

1 : $1.46

9,653

W92-X112-50

TE Connectivity

W92-X112-50=M6/M7/M9/W6/W7 Circuit Breaker Type: Magnetic Circuit Function: Series Trip Illuminated: Without Actuator Color: Black Operating Voltage: 277 VAC Magnetic Series Trip Without Black | Circuit Breaker | Part Number: W92-X112-50 | Internal Number: 8-1393254-3 | TE Connectivity
RoHS : Compliant

50 : $283.5
25 : $300.17
10 : $316.84
1 : $333.52

2,116

2842504-6

TE Connectivity

6P TB HDR HZ (90) 3.81, GN Number of Positions: 6 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .15 in Centerline (Pitch): 3.81 mm Push-In PCB Terminal Blocks: Time Saving Connector | 6 Header Wire-to-Board .15" | Part Number: 2842504-6 | Internal Number: 2842504-6 | .15" | TE Connectivity
RoHS : Compliant

25,000 : $0.62
10,000 : $0.63
5,000 : $0.65
2,500 : $0.66
1,000 : $0.67
500 : $0.68
250 : $0.7
100 : $0.71
50 : $0.72
25 : $0.73
10 : $0.75
1 : $0.76

1,480

222K152-25/225-0

TE Connectivity

222K152-25/225-0 Body Orientation: Right Angle Molded Part Shape Code: 222 Lipped: Yes Material Code: 25 Material Systems Code: 25 Heat Shrink Boot | Right Angle 222 25 | Part Number: 222K152-25/225-0 | Internal Number: 723486-000 | Alias Number: 9-1195655-9 | TE Connectivity
RoHS : Compliant

1 : $29.54

383

202K132-25-01/225-0

TE Connectivity

202K132-25-01/225-0 Body Orientation: Straight Molded Part Shape Code: 202 Lipped: Yes Material Code: 25 Material Systems Code: 25 Heat Shrink Boot | Straight 202 25 | Part Number: 202K132-25-01/225-0 | Internal Number: 259472-000 | Alias Number: 2-1191898-6 | TE Connectivity
RoHS : Compliant

1 : $23.42

224

562A032-25-0

TE Connectivity

562A032-25-0 Molded Part Shape: Y Shape Number of Branches: 5 Material Code: 25 Material Systems Code: 25 Adhesive Requirement: Adhesive Purchased Separately Y Shape 5 25 | Heat Shrinkable Cable Breakout And Cable Transition | Part Number: 562A032-25-0 | Internal Number: 829100-000 | Alias Number: 1-1196474-4 | TE Connectivity
RoHS : Compliant

1 : $69.49

194

T1250103125-000

TE Connectivity

H10B-TSBS-M25 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1250103125-000 | Internal Number: T1250103125-000 | TE Connectivity
RoHS : Compliant

25 : $32.21
10 : $34.69
1 : $37.17

TE2500B18RJ

TE Connectivity

TE 2500W 18R 5% Bracket Resistance Value: 18 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 18 Ω Wire Wound 5 % Power Resistor | Part Number: TE2500B18RJ | Internal Number: 1-1879457-6 | TE Connectivity
RoHS : Compliant

1 : $409.09

T1250242125-000

TE Connectivity

H24B-TSB-M25 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1250242125-000 | Internal Number: T1250242125-000 | TE Connectivity
RoHS : Compliant

25 : $29.05
10 : $31.29
1 : $33.52

202K163-25-02/225-0

TE Connectivity

202K163-25-02/225-0 Body Orientation: Straight Molded Part Shape Code: 202 Lipped: Yes Material Code: 25 Material Systems Code: 25 Heat Shrink Boot | Straight 202 25 | Part Number: 202K163-25-02/225-0 | Internal Number: 856164-000 | Alias Number: 1-1196673-3 | TE Connectivity
RoHS : Compliant

1 : $47.13

T1440162125-000

TE Connectivity

H16B-SGR-M25 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1440162125-000 | Internal Number: T1440162125-000 | TE Connectivity
RoHS : Compliant

10 : $33.15
1 : $36.83

T1920100125-009

TE Connectivity

H10BPR-TGH-M25-EMC-C Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Screwlock Hood Top & Side Screwlock | Rectangular Connector Hoods & Base | Part Number: T1920100125-009 | Internal Number: T1920100125-009 | TE Connectivity
RoHS : Compliant

1 : $48.54

FN3359HV-2500-99

TE Connectivity

FN3359HV-2500-99 Current Rating: 2500 A Input Termination Type: Busbar Output Termination Type: Busbar Wiring Configuration: DELTA (3 wire + ground) Operating Voltage: 760 VAC 3-Phase Filters & High-Current Emc/rfi Filter 2500 A | 2500 A Busbar DELTA (3 wire + ground) | Part Number: FN3359HV-2500-99 | Internal Number: 813733-SF | TE Connectivity
RoHS : Compliant

1 : $36,200.17

T1250162125-000

TE Connectivity

H16B-TSB-M25 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1250162125-000 | Internal Number: T1250162125-000 | TE Connectivity
RoHS : Compliant

25 : $26.17
10 : $28.18
1 : $30.19

Teledyne HiRel

5962-9222503MLA

Teledyne HiRel

BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant

QPV2500H-35KC

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

QPV2500BL-20KI

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

5962-8752501BDA

Teledyne HiRel

FLIP-FLOP, D-TYPE, DUAL, WITH PRESET AND CLEAR AND TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9325001MSA

Teledyne HiRel

BUFFER/LINE DRIVER, OCTAL, W/3-STATE OUTPUTS AND
RoHS : Not Compliant

5962-9325001MRA

Teledyne HiRel

BUFFER/LINE DRIVER, OCTAL, W/3-STATE OUTPUTS AND
RoHS : Not Compliant

5962-8752501B2A

Teledyne HiRel

FLIP-FLOP, D-TYPE, DUAL, WITH PRESET AND CLEAR AND TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9222505MLA

Teledyne HiRel

BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant

QPV2500BL-20DI

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR
RoHS : Unknown

5962-9222501MLA

Teledyne HiRel

BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant

QPV2500B-15DI

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

QPV2500BL-20DC

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

5962-9222505M3A

Teledyne HiRel

BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant

QPV2500B-15DC

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

QPV2500BQ-25DC

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

Venkel Ltd.

AGC0402X7R250-332MNP

VENKEL LTD

Auto Grade Capacitor;0402;X7R;25V;3300pF;�20%
RoHS : Compliant

AGC0603X7R250-153MNP

VENKEL LTD

Auto Grade Capacitor;0603;X7R;25V;0.015uF;�20%
RoHS : Compliant

MELFC0102-YK-8250FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�100PPM;825R;�1%
RoHS : Compliant

MELFC0204-TC-8250FT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;825R;�1%
RoHS : Compliant

MELFC0204-TE-8250BT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�25PPM;825R;�0.1%
RoHS : Compliant

MELFC0204-TZ-8250CT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�15PPM;825R;�0.25%
RoHS : Compliant

MELFC0204-ZC-8250DT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;825R;�0.5%
RoHS : Compliant

MELFC0207-XN-8250DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�10PPM;825R;�0.5%
RoHS : Compliant

MELFM0207-VC-8250CT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�50PPM;825R;�0.25%
RoHS : Not Compliant

UPTF0805-10W-N-8250UT

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�10PPM;825R;�0.01%
RoHS : Compliant

TFCR0603-10W-E-8250BT

VENKEL LTD

Thin Film CR;0603;1/10W;�25PPM;825R;�0.1%
RoHS : Compliant

TFCR0805-8W-K-8250DT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�100PPM;825R;�0.5%
RoHS : Compliant

HPTF0603-QC-8250UT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�50PPM;825R;�0.01%
RoHS : Compliant

HPTF0603-QP-8250DT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�5PPM;825R;�0.5%
RoHS : Compliant

HPTF1210-UN-8250UT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�10PPM;825R;�0.01%
RoHS : Compliant

Win Source Electronics

LM25085MYX

Texas Instruments

LM25085, LM25085-Q1 42V Constant On-Time PFET Buck Switching Controller

77 : $3.9098
58 : $4.361
45 : $4.5113
33 : $4.6617
21 : $4.8121
9 : $5.8647

65,190

VMMK-2503-BLKG

Broadcom Limited

IC RF AMP GP 1GHZ-12GHZ 0402 / RF Amplifier IC General Purpose 1GHz ~ 12GHz 0402
RoHS : Compliant

42 : $8.1454
31 : $9.0853
24 : $9.3986
18 : $9.7119
12 : $10.0251
5 : $12.2181

36,535

MSP430FG4250IDLR

Texas Instruments

IC MCU 16BIT 16KB FLASH 48SSOP
RoHS : Compliant

132 : $2.2812
99 : $2.5444
76 : $2.6321
56 : $2.7199
36 : $2.8076
15 : $3.4218

30,000

TPH2502-SR

3peak Incorporated

250MHz, Precision, Rail-to-Rail I/O, CMOS Op-amps
RoHS : Compliant

965 : $0.3124
720 : $0.3485
555 : $0.3605
405 : $0.3725
265 : $0.3845
110 : $0.4686

28,268

39212500000

Littelfuse Inc

FUSE BRD MNT 2.5A 250VAC RADIAL / Radial Lead Fuses
RoHS : Compliant

6,610 : $0.0454
4,935 : $0.0507
3,820 : $0.0524
2,775 : $0.0541
1,790 : $0.0559
735 : $0.0681

28,000

TLE8250GVIO

Infineon Technologies AG

High Speed CAN-Transceiver
RoHS : Compliant

102 : $2.9574
76 : $3.2986
59 : $3.4124
43 : $3.5261
28 : $3.6399
12 : $4.4361

22,500

SN8P2501BSG

SONIX Technology Co Ltd

1,535 : $0.219
1,150 : $0.2443
890 : $0.2527
645 : $0.2611
420 : $0.2696
175 : $0.3285

21,964

TLP250-TP1

Toshiba America Electronic Components

265 : $1.2783
215 : $1.3315
165 : $1.3848
115 : $1.4913
75 : $1.5445
35 : $1.651

16,810

OPA137NA/250

Texas Instruments

IC OPAMP GP 1MHZ SOT23-5
RoHS : Compliant

190 : $1.5841
152 : $1.6485
117 : $1.7129
82 : $1.8417
53 : $1.9061
25 : $2.0349

8,170

TLE8250G

Infineon Technologies AG

High Speed CAN-Transceiver
RoHS : Compliant

156 : $1.9304
117 : $2.1531
90 : $2.2273
66 : $2.3016
43 : $2.3758
18 : $2.8955

6,000

0353620250

Molex

CONN HEADER VERT 2POS 2MM
RoHS : Compliant

2,320 : $0.1449
1,735 : $0.1617
1,340 : $0.1672
975 : $0.1728
630 : $0.1784
260 : $0.2174

3,000

OPA656NB/250G4

Texas Instruments

IC OPAMP VFB 230MHZ SOT23-5
RoHS : Compliant

34 : $8.8637
26 : $9.8864
20 : $10.2273
15 : $10.5682
10 : $10.9091
4 : $13.2955

2,710

7M25000018

TXC Corporation

CRYSTAL 25.0000MHZ 12PF SMD
RoHS : Compliant

3,810 : $0.0788
2,845 : $0.0879
2,200 : $0.091
1,600 : $0.094
1,035 : $0.097
425 : $0.1182

1,275

A3P250-FGG256I

Microchip Technology Inc

IC FPGA 157 I/O 256FBGA
RoHS : Compliant

1 : $1,812.1213

200

MSP430FG4250IRGZT

Texas Instruments

IC MCU 16BIT 16KB FLASH 48VQFN / MCU 16-bit MSP430 RISC 16KB Flash 2.5V/3.3V 48-Pin VQFN EP T/R
RoHS : Compliant

81 : $4.1979
60 : $4.6823
47 : $4.8437
34 : $5.0052
22 : $5.1667
9 : $6.2968

180

Wuhan P&S

RCWE251250L0FNEA

Vishay Intertechnologies

Thick Film Surface Mount Chip Resistors
RoHS : Compliant

1 : $0.4079
100 : $0.1465
500 : $0.1059
1,000 : $0.0981

562,000

SZMMSZ5250BT1G

onsemi

RoHS : Compliant

1 : $0.1126
100 : $0.0719
500 : $0.0593
1,000 : $0.0545

21,000

MRS25000C1002FRP00

Vishay Intertechnologies

Professional Thin Film Leaded Resistors
RoHS : Compliant

1 : $0.35
100 : $0.12
500 : $0.11
1,000 : $0.11

15,000

MRS25000C1004FCT00

Vishay Intertechnologies

Professional Thin Film Leaded Resistors
RoHS : Compliant

1 : $0.29
100 : $0.1
500 : $0.09
1,000 : $0.09

15,000

MRS25000C1001FRP00

Vishay Intertechnologies

Professional Thin Film Leaded Resistors
RoHS : Compliant

1 : $0.35
100 : $0.12
500 : $0.11
1,000 : $0.11

15,000

NCS2250SQ2T2G

onsemi

Low Voltage Comparator
RoHS : Compliant

1 : $0.54
100 : $0.35
500 : $0.29
1,000 : $0.27

3,000

10025026-10002TLF

Amphenol FCi

PCI Express : x8 Straddle-Mount Card Edge Connector, 98 Positions, 1 mm (0.039 in.) P
RoHS : Compliant

1 : $3.68
100 : $3.51
500 : $3.07
1,000 : $2.96

1,200

WSBS8518L2500JKM3

Vishay Intertechnologies

WSBS8518-M3 .00025 5% K
RoHS : Compliant

1 : $153.31
100 : $51.11
500 : $47.27
1,000 : $46.0

2500000023 Distributor

Link URL