250-STU-R Price, Distributor, Stock

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Blue FAKRA Jack Right Angle to MMCX Plug Right Angle Cable 24 Inch Length Using RG188 Coax with HeatShrink., Pasternack’s PE3W22509/HS-24 right angle FAKRA jack to right angle MMCX plug RF cable assembly using RG188 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The FAKRA jack to MMCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle FAKRA cable connection on one end and a right angle MMCX cable connection on the other. Our FAKRA to MMCX cable assembly has a jack gender on end 1 and a plug on end 2. PE3W22509/HS-24 can also be known as a right angle FAKRA female to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W22509/HS-24 RF cable has a ptfe jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. Our right angle FAKRA jack to right angle MMCX plug cable has a maximum VSWR of 1.4:1. This PE3W22509/HS-24 FAKRA female to MMCX male cable assembly is built with RG188, which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with right angle FAKRA to right angle MMCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3W22509/HS-24 can also be used in the other direction and will be a right angle MMCX plug to right angle FAKRA jack cable assembly if the opposite connectivity is required. This FAKRA right angle female to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to MMCX cable assembly for quick shipment worldwide. Variations of FAKRA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to MMCX RF cable assembly as per your requirements.

1 : $69.25
25 : $65.79
50 : $62.33
100 : $59.56

860

PE3W01992-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. BNC Male to BNC Male Right Angle Cable 50 cm Length Using LMR-195 Coax., Radio frequency assembly BNC male to BNC male right angle cable 50 cm length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male right angle cable 50 cm length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and right angle BNC cable connection on the other. Our low loss BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3W01992-50CM, can also be known as a low loss BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W01992-50CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency BNC male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01992-50CM can also be used in the other direction and will be right angle BNC male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male right angle cable 50 cm length using LMR-195 coax.

1 : $74.89
25 : $71.15
50 : $67.4
100 : $64.41

830

PE3W00852-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. SMA Male Right Angle to N Male Right Angle Cable 50 cm Length Using LMR-195 Coax., Radio frequency assembly SMA male right angle to N male right angle cable 50 cm length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male right angle to N male right angle cable 50 cm length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle N type cable connection on the other. Our low loss right angle SMA to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to N type cable is a male to male coax assembly, PE3W00852-50CM, can also be known as a low loss right angle SMA plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W00852-50CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00852-50CM can also be used in the other direction and will be right angle type N male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to N male right angle cable 50 cm length using LMR-195 coax.

1 : $75.59
25 : $71.81
50 : $68.03
100 : $65.01

254

PE3C6342-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Outdoor Rated 7/16 DIN Male to N Male Low PIM Cable 50 cm Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to N male low PIM cable 50 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N male low PIM cable 50 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-250-NM-LP N type cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP N type cable is a male to male coax assembly, PE3C6342-50CM, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly PE3C6342-50CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-250-NM-LP type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6342-50CM can also be used in the other direction and will be TC-250-NM-LP N type male to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N male low PIM cable 50 cm length using SPO-250 coax using Times Microwave parts.

1 : $98.49
25 : $93.57
50 : $88.64
100 : $84.7

PEWCP1082-50

Pasternack Enterprises

Key Specifications, Waveguide Size : WR-159, Flange Size: None, Flange Type : CPR-159F, Minimum Frequency: 4.64 GHz, Maximum Frequency: 7.05 GHz, Maximum VSWR: 1.25:1, Coupling: 50 dB. WR-159 Waveguide 50 dB Crossguide Coupler, CPR-159F Flange, N Female Coupled Port, 4.64 GHz to 7.05 GHz, Aluminum. The PEWCP1082-50 is a 50 dB WR-159 three port crossguide coupler with intergrated N Female connector for the coupled port. This coupler can be mounted directly into the waveguide signal path, connected via coax to allow signal sampling /monitoring. The coupler has a typical VSWR of 1.1:1 and are made of Aluminum with CPR-159F flanges. The PEWCP1082-50 is part of a family of cross guide couplers offered by Pasternack with coupling values ranging from 20 to 50 dB.

1 : $2,020.0
5 : $1,939.2
10 : $1,858.4
25 : $1,777.6

PE88D25000

Pasternack Enterprises

1 : $1,620.0
5 : $1,555.2
10 : $1,490.4
25 : $1,425.6

PE3C2505-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMP Female Right Angle to MMCX Plug Right Angle Cable 48 Inch Length Using RG196 Coax., Radio frequency assembly SMP female right angle to MMCX plug right angle cable 48 inch length using RG196 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to MMCX plug right angle cable 48 inch length using RG196 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMP cable connection on one end and a right angle MMCX cable connection on the other. Our right angle SMP to right angle MMCX cable assembly has a female gender on end 1 and a plug on end 2. PE3C2505-48 can also be known as a right angle SMP jack to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3C2505-48 RF cable has a PTFE jacket of 0.080-inch diameter. The flexible RF cable has a between series connection. Our right angle SMP female to right angle MMCX plug cable has a maximum VSWR of 1.4:1. SMP jack to MMCX male cable assembly PE3C2505-48 is built with RG196 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to right angle MMCX cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/crimp attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C2505-48 can also be used in the other direction and will be a right angle MMCX plug to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to MMCX cable assembly for quick shipment worldwide. Variations of SMP and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to MMCX RF cable assembly as per your requirements.

1 : $89.89
10 : $88.09
25 : $86.29
100 : $84.5

PE3C7972-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. NEX10 Male to NEX10 Male Right Angle Low PIM Cable 50 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male right angle low PIM cable 50 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. NEX10 male to NEX10 male right angle low PIM cable 50 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom NEX10 to NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with NEX10 cable connection on one end and right angle NEX10 cable connection on the other. Our low PIM NEX10 to right angle NEX10 cable assemblies have a male gender on end 1 and male on end 2. This NEX10 to NEX10 cable is a male to male coax assembly, PE3C7972-50CM, can also be known as a low PIM NEX10 plug to right angle NEX10 plug cable assembly and will be shipped same-day as it is purchased. NEX10 plug to NEX10 plug cable assembly PE3C7972-50CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to right angle NEX10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency low PIM NEX10 male to NEX10 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7972-50CM can also be used in the other direction and will be right angle NEX10 male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this NEX10 male to NEX10 male right angle low PIM cable 50 cm length using TFT-402 coax using Times Microwave components.

1 : $102.99
25 : $97.84
50 : $92.69
100 : $88.57

PE3M0250-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL-27478, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Temperature Conditioned N Female Bulkhead to N Female Bulkhead Low Loss Cable 12 Inch Length Using PE-P300LL Coax., Pasternack temperature conditioned N female bulkhead to N female bulkhead low loss cable 12 inch length using PE-P300LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0250-12 is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability N type to type N cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with type N connection on one end and type N connection on the other. Our low loss type N to N type cable assemblies have a female gender on end 1 and female on end 2. This type N to N type cable is a female to female coax assembly. PE3M0250-12 can also be known as a temperature conditioned low loss type N jack to type N jack cable assembly and will be shipped the same day after it is purchased. N type jack to type N jack cable assembly PE3M0250-12 is built with PE-P300LL which is a flexible coax. The Pasternack flexible N type cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency type N female to type N female cable are located on the datasheet specifications PDF along with CAD drawing and dimensions, Pasternack high reliability low loss type N jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for same-day shipment worldwide. Variations of PE44807 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned N female bulkhead to N female bulkhead low loss cable 12 inch length using PE-P300LL coax.

1 : $952.99
25 : $905.34
50 : $857.69
100 : $819.57

PE3W02506/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. N Male to SMA Female Cable Using RG393 Coax with HeatShrink. PE3W02506/HS is a N male to SMA female cable using RG393 coax. This Pasternack N male to SMA female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02506/HS N male to SMA female cable assembly is constructed with RG393 coax.

PE3W15250

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Cable Using LMR-240 Coax. PE3W15250 is a SMA male to BNC male cable using LMR-240 coax. This Pasternack SMA male to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15250 SMA male to BNC male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W25006

Pasternack Enterprises

Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Receptacle, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: D-Sub, Connector Gender 2: Receptacle, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. D-Sub Receptacle to D-Sub Receptacle Cable Using RG142 Coax. PE3W25006 is a D-Sub receptacle to D-Sub receptacle cable using RG142 coax. This Pasternack D-Sub receptacle to D-Sub receptacle cable assembly uses a 50 Ohm D-Sub for connector 1 and a 50 Ohm D-Sub for connector 2. Our receptacle D-Sub to receptacle D-Sub cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25006 D-Sub receptacle to D-Sub receptacle cable assembly is constructed with RG142 coax.

PE3W25039/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. C Male to SHV Jack Cable Using PE-P195 Coax with HeatShrink. PE3W25039/HS is a C male to SHV jack cable using PE-P195 coax. This Pasternack C male to SHV jack cable assembly uses a 50 Ohm C for connector 1 and a 50 Ohm SHV for connector 2. Our male C to jack SHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25039/HS C male to SHV jack cable assembly is constructed with PE-P195 coax.

PE3W25051

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Bulkhead Cable Using RG316 Coax. PE3W25051 is a SMA male to SMA female bulkhead cable using RG316 coax. This Pasternack SMA male to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25051 SMA male to SMA female bulkhead cable assembly is constructed with RG316 coax.

PE3W25088

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. SMA Female to SMA Male Right Angle Cable Using LMR-400-UF Coax. PE3W25088 is a SMA female to SMA male right angle cable using LMR-400-UF coax. This Pasternack SMA female to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25088 SMA female to SMA male right angle cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

Teledyne HiRel

QPV2500BQ-25DC

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

QPV2500BQL-30KC

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

5962-9222505M3A

Teledyne HiRel

BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant

5962-8752501BCA

Teledyne HiRel

FLIP-FLOP, D-TYPE, DUAL, WITH PRESET AND CLEAR AND TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8762501FA

Teledyne HiRel

DATA SEL/MULTIPLEXER, DUAL 4-INPUT
RoHS : Not Compliant

QPV2500H-25DI

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

5962-8752501BDA

Teledyne HiRel

FLIP-FLOP, D-TYPE, DUAL, WITH PRESET AND CLEAR AND TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

M38510/32501BRA

Teledyne HiRel

8-BIT REGISTER WITH CLEAR

QPV2500BL-20KI

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

5962-9222501M3A

Teledyne HiRel

BUS INTERFACE REGISTER, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant

QPV2500B-15KC

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

QPV2500B-15DC

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

QPV2500L-30DI

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR

5962-9325001MSA

Teledyne HiRel

BUFFER/LINE DRIVER, OCTAL, W/3-STATE OUTPUTS AND
RoHS : Not Compliant

5962-9325001MRA

Teledyne HiRel

BUFFER/LINE DRIVER, OCTAL, W/3-STATE OUTPUTS AND
RoHS : Not Compliant

Venkel Ltd.

C0402C0G250-120FNP

VENKEL LTD

Chip Capacitor;0402;C0G;25V;12pF;�1%
RoHS : Compliant

230,000

C0201HQN250-0R3BNP

VENKEL LTD

High-Q NP0 Chip Capacitor;0201;HQN;25V;0.3pF;�0.1pF
RoHS : Compliant

15,000

C01005HQN250-3R6CNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;25V;3.6pF;�0.25pF
RoHS : Compliant

C01005HQN250-6R2DNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;25V;6.2pF;�0.5pF
RoHS : Compliant

C0201C0G250-100GNP

VENKEL LTD

Chip Capacitor;0201;C0G;25V;10pF;�2%
RoHS : Compliant

C0201C0G250-470GNP

VENKEL LTD

Chip Capacitor;0201;C0G;25V;47pF;�2%
RoHS : Compliant

C0201HQN250-120FNP

VENKEL LTD

High-Q NP0 Chip Capacitor;0201;HQN;25V;12pF;�1%
RoHS : Compliant

C0201HQN250-270JNP

VENKEL LTD

High-Q NP0 Chip Capacitor;0201;HQN;25V;27pF;�5%
RoHS : Compliant

C0201HQN250-2R2ANP

VENKEL LTD

High-Q NP0 Chip Capacitor;0201;HQN;25V;2.2pF;�0.05pF
RoHS : Compliant

C0201HQN250-4R9BNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;25V;4.9pF;�0.1pF
RoHS : Compliant

C0201HQN250-5R6DNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;25V;5.6pF;�0.5pF
RoHS : Compliant

C0201HQN250-7R5CNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;25V;7.5pF;�0.25pF
RoHS : Compliant

C0201HQN250-9R4BNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;25V;9.4pF;�0.1pF
RoHS : Compliant

C0402C0G250-0R3BNP

VENKEL LTD

Chip Capacitor;0402;C0G;25V;0.3pF;�0.1pF
RoHS : Compliant

C0402C0G250-101JPBE

VENKEL LTD

Chip Capacitor;0402;C0G;25V;100pF;�5%;Pb
RoHS : Compliant

Waytek, Inc.

PET 3/4 BLACK 250'

Techflex Inc

Techflex PTN0.75BK-250 Standard Expandable Sleeving is black 3/4" braided polyester sleeving on a 250' spool. It features a 10 mil standard wall, fits recommended bundle sizes from 1/2" to 1-1/4", and is designed to slip over wire harnesses or tubing for abrasion protection and cable bundling.

250 : $0.335
1,250 : $0.3074

39,000

19025-0007

Molex

16-14 GA Male Disconnect .250x.032 Insulated Blue Nylon MALE DISCONNECT .250 X .032
RoHS : Compliant

50 : $0.2368
200 : $0.2243
500 : $0.2087
1,000 : $0.2005

8,989

CPX 100 0250 BLACK

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is black tubing with a .250" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

100 : $0.3781
500 : $0.3462

6,400

T250M0X2 111-25001

HellermannTyton

HellermannTyton T250M0X2 heavy-duty cable tie is a 22" long high-strength tie built for securing large wire bundles, hoses, and tubing. Its one-piece self-locking design supports fast installation and dependable hold in demanding electrical, industrial, and harness-routing applications.

25 : $2.0627
50 : $1.9272
100 : $1.768
200 : $1.7043
500 : $1.6326
1,000 : $1.5689

4,375

50250N

Hillsdale Terminal & Tool Inc

Nylon Ring Terminal 12-10 Gauge 5/16" Stud

50 : $0.1781
200 : $0.1616
500 : $0.1444
1,000 : $0.131
5,000 : $0.1248

2,780

19125-0078

Molex

12-10GA #10 Flanged Block Spade Nylon Terminal w/ Sleeve BRASS EXTRA SLEEVE

25 : $0.4926
50 : $0.438
100 : $0.3984
200 : $0.3851
500 : $0.3719
1,000 : $0.357

2,211

T250R0X2 111-24801

HellermannTyton

HellermannTyton T250R0X2 heavy-duty cable tie is a 20" long high-strength tie built for securing large wire bundles, hoses, and tubing. Its one-piece self-locking design supports fast installation and dependable hold in demanding electrical, industrial, and harness-routing applications.

25 : $1.6545
50 : $1.5459
100 : $1.4182
200 : $1.3671
500 : $1.3095
1,000 : $1.2584

2,150

C1132/20 2501

APM HEXSEAL

APM Hexseal C1132/20 2501 gray half toggle switch boot protects the toggle bushing while leaving the bat handle exposed. It fits 15/32-32 thread toggle switches, accepts 0.155"-0.240" toggle diameters, and provides a gray sealing boot option for illuminated or standard toggles.

3 : $2.2397
50 : $1.8754
100 : $1.6265
200 : $1.5287
500 : $1.4665

570

OS69-18-250M

NSPA

22-18 GA Male Disconnect .250 X .032 Clear Heat Shrink 30713 30912 30981

20 : $0.7715
50 : $0.6875
100 : $0.6238
200 : $0.6035
500 : $0.5831
1,000 : $0.5601

514

1600-037-250-15

25A Circuit Breaker UL1500 50V Ignition Proof Panel Mount UL 1077 7/16" 28 DIECAST MOUNT

1 : $4.28
50 : $3.59
100 : $3.15
200 : $2.96
500 : $2.86

333

OS69-14-250M

NSPA

16-14 GA Male Disconnect .250 X .032 Clear Heat Shrink 31912 31772

20 : $0.7617
50 : $0.6783
100 : $0.6157
200 : $0.5948
500 : $0.574
1,000 : $0.5531

290

22125-000

Eaton Electronics

25 AMP Circuit Breaker Type 1 ATC Blade Bussmann 22125-000

1 : $4.3517
10 : $3.947
50 : $3.6203
100 : $3.1631
200 : $2.9622
500 : $2.8342

202

4200250RD0048

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is red tubing with a 1/4" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

10 : $2.1507
50 : $1.858
100 : $1.6862
200 : $1.5462
500 : $1.4571

171

HDBB-505-1-250

3M HDBB-505-1-250 heat shrinkable cable breakout boot is a 5-way molded heat shrink shape for multiconductor armored or sheathed cables. It provides electrical and mechanical protection, uses adhesive-sealed polyolefin construction, and has 2.36"/0.96" outlet dimensions for larger breakout sealing.

1 : $139.79
5 : $133.6
10 : $128.29
25 : $121.21

15250-1BLR

Eaton Electronics

Eaton Bussmann Series 15250-1BLR battery disconnect switch is a mechanical On-Off disconnect rated 400A at 50VDC. It includes a mounting bracket, 1/2"-13 terminal connection, and rugged high-current construction for battery isolation in vehicle electrical systems.

1 : $366.65
5 : $350.45
10 : $334.24

Win Source Electronics

C3225X7R1C226M250AC

TDK Corporation

CAP CER 22UF 16V X7R 1210 / Cap Ceramic 22uF 16V X7R 20% Pad SMD 1210 125°C Low ESR T/R
RoHS : Compliant

2,030 : $0.1478
1,520 : $0.1648
1,175 : $0.1705
855 : $0.1762
550 : $0.1819
230 : $0.2216

97,635

AT25020

Atmel Corporation

SPI Serial EEPROMs

2,495 : $0.1347
2,000 : $0.1402
1,540 : $0.1456
1,075 : $0.1566
695 : $0.1621
325 : $0.173

70,000

TAS2505TRGERQ1

Texas Instruments

IC AMP CLASS D MONO 2.6W 24VQFN / Amplifier IC 1-Channel (Mono) Class D 24-VQFN (4x4)
RoHS : Compliant

33 : $9.3182
26 : $9.697
20 : $10.0758
14 : $10.8334
9 : $11.2122
5 : $11.9697

40,000

MAX6250BESA

Maxim Integrated Products

IC VREF SERIES 0.1% 8SOIC / Low-Noise, Precision, +2.5V/+4.096V/+5V Voltage References
RoHS : Not Compliant

77 : $3.8985
58 : $4.3483
45 : $4.4982
33 : $4.6482
21 : $4.7981
9 : $5.8477

29,982

LM25011AMY/NOPB

Texas Instruments

202 : $1.491
162 : $1.5516
125 : $1.6122
87 : $1.7334
56 : $1.794
27 : $1.9152

26,790

LM25007MM

Texas Instruments

LM25007 42V, 0.5A Step-Down Switching Regulator | IC REG BUCK ADJ 500MA 8VSSOP
RoHS : Not Compliant

325 : $1.0484
260 : $1.091
200 : $1.1337
140 : $1.2189
90 : $1.2615
45 : $1.3467

25,000

C3M0025065K

Wolfspeed

GEN 3 650V 25 M SIC MOSFET / N-Channel 650 V 97A (Tc) 326W (Tc) Through Hole TO-247-4L
RoHS : Compliant

20 : $15.1855
16 : $15.8028
13 : $16.42
9 : $17.6546
6 : $18.2719
3 : $19.5065

24,360

PTS815SJG250SMTRLFS

C&K Switches

TACT
RoHS : Compliant

5,360 : $0.056
4,000 : $0.0625
3,100 : $0.0646
2,250 : $0.0668
1,455 : $0.0689
600 : $0.084

18,000

OPA355NA/250G4

Texas Instruments

IC OPAMP VOLT-FDBK W/SD SOT23-6
RoHS : Compliant

495 : $0.6819
395 : $0.7096
305 : $0.7373
215 : $0.7927
140 : $0.8205
65 : $0.8758

16,540

MSP430F4250IDL

Texas Instruments

IC MCU 16BIT 16KB FLASH 48SSOP
RoHS : Compliant

77 : $3.9394
57 : $4.394
44 : $4.5455
32 : $4.697
21 : $4.8485
9 : $5.9091

10,000

MSP430F4250IDLR

Texas Instruments

MCU 16-bit MSP430 RISC 16KB Flash 2.5V/3.3V 48-Pin SSOP T/R / IC MCU 16BIT 16KB FLASH 48SSOP
RoHS : Compliant

77 : $3.9394
57 : $4.394
44 : $4.5455
32 : $4.697
21 : $4.8485
9 : $5.9091

9,420

SP2504NUTG

Littelfuse Inc

TVS DIODE 2.5VWM 11.5VC UDFN10
RoHS : Compliant

485 : $0.6954
365 : $0.7757
280 : $0.8025
205 : $0.8291
135 : $0.8559
55 : $1.0432

8,753

REF35250QDBVR

Texas Instruments

IC VREF SERIES SOT23-6
RoHS : Compliant

16 : $19.8474
12 : $22.1375
9 : $22.9008
7 : $23.6642
5 : $24.4275
2 : $29.771

5,000

0402N220J250CT

Walsin Technology Corporation

CAP CER 22PF 25V C0G/NP0 0402 / 22 pF ±5% 25V Ceramic Capacitor C0G, NP0 0402 (1005 Metric)
RoHS : Compliant

176,475 : $0.0019
131,580 : $0.0021
100,000 : $0.0022
75,000 : $0.0022
47,620 : $0.0024
20,000 : $0.0028

3,300

SN74VMEH22501ADGGR

Texas Instruments

8-BIT UNIVERSAL BUS TRANSCEIVER AND TWO 1-BIT BUS TRANSCEIVERS WITH SPLIT LVTTL PORT, FEEDBACK PATH, AND 3-STATE OUTPUTS | IC UNIVERSAL BUS TXRX 48TSSOP
RoHS : Compliant

42 : $7.201
32 : $8.0319
25 : $8.3088
18 : $8.5858
12 : $8.8627
5 : $10.8015