| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow |
 Avnet Americas | 382A023-100-CS-1972-0
| TE Connectivity | - Bulk (Alt: 722453-000) RoHS : Compliant | 4,000 : $39.0432 2,000 : $39.2424 1,000 : $39.4416 500 : $39.6408 125 : $42.50991
|
| 0
 |
23100C
| Murata Manufacturing Co Ltd | - Tape and Reel (Alt: 23100C) RoHS : Compliant | 32,000 : $0.46154 16,000 : $0.46753 8,000 : $0.47368 4,000 : $0.48 2,000 : $0.48649
|
| 0
 |
462A023-100-CS-1972-0
| TE Connectivity | - Bulk (Alt: 485633-000) RoHS : Compliant | 4,000 : $49.735 2,000 : $49.98875 1,000 : $50.2425 500 : $50.49625 100 : $54.12
|
| 0
 |
462W023-100-CS-1972-0
| TE Connectivity | 462W023-100-CS-1972-0 - Bulk (Alt: 866493-000) RoHS : Compliant | 4,000 : $57.18467 2,000 : $58.4537 1,000 : $59.5402 500 : $65.73764 100 : $76.59261
|
| 0
 |
CCP2-3-100CF
| Eaton Corporation | - Bulk (Alt: CCP2-3-100CF) RoHS : Not Compliant | 32 : $504.0 16 : $512.5885 8 : $521.0931 4 : $529.6875 2 : $538.23083
|
| 0
 |
SFP-10GB-DW23-100-C
| Amphenol Corporation | - Bulk (Alt: SFP-10GB-DW23-100-C) RoHS : Compliant | 800 : $4,460.9663 400 : $4,554.0796 200 : $4,627.2495 100 : $4,693.6113 50 : $4,800.0
|
| 0
 |
 Mouser Electronics | CCP2-3-100CF
| Eaton Corporation | Disconnect Switches 3 POLE CLASS CF COMPCT CIRC PROTECTR RoHS : Compliant | | 7
 |
PE3W02623-100CM
| Pasternack Enterprises | RF Cable Assemblies SMA Male to N Male Low Loss Cable 100 cm Length Using LMR-100 Coax | 1 : $86.15 10 : $75.09 25 : $72.2 50 : $69.79 100 : $62.25
|
| 1
 |
462A023-100-CS-1972-0
| TE Connectivity | Heat Shrink Cable Boots & End Caps 462A023-100-CS1972-0 | 1 : $76.54 10 : $72.04 25 : $64.84
|
| 0
 |
FMC00323-100CM
| Fairview Microwave Inc | RF Cable Assemblies Low Loss SSMC Plug to SMB Plug Cable RG-316 Coax in 100 CM | 1 : $95.75 10 : $86.18 25 : $85.82 50 : $84.04
|
| 0
 |
PE3W04423-100CM
| Pasternack Enterprises | RF Cable Assemblies N Female to SMA Male Right Angle Cable 100 cm Length Using LMR-240-UF Coax RoHS : Compliant | 1 : $115.11 10 : $102.23 25 : $98.3 50 : $95.02
|
| 0
 |
FMC00423-100CM
| Fairview Microwave Inc | RF Cable Assemblies RP SMA Male to RA QMA Male Cable LMR-240 Coax in 100 cm | 1 : $116.23 10 : $108.25 25 : $106.62 50 : $104.47
|
| 0
 |
FMCA1823-100CM
| Fairview Microwave Inc | RF Cable Assemblies Low PIM QMA Male to RA SMA Male Plenum Cable SPP-250-LLPL Coax in 100 cm with LF Solder | 1 : $125.92 10 : $116.9 25 : $115.09 50 : $112.7
|
| 0
 |
PE3W08023-100CM
| Pasternack Enterprises | RF Cable Assemblies SSMC Plug to SMB Jack Bulkhead Cable 100 cm Using RG178 Coax | 1 : $126.11 10 : $112.0 25 : $107.69 50 : $104.1
|
| 0
 |
PE3W04623-100CM
| Pasternack Enterprises | RF Cable Assemblies Reverse Polarity SMA Female Bulkhead to SMA Male Cable 100 cm Length Using PE-SR405FLJ Coax | 1 : $142.84 10 : $131.1 25 : $126.05 50 : $121.84
|
| 0
 |
FMCA2023-100CM
| Fairview Microwave Inc | RF Cable Assemblies Fire Rated Low PIM 4.3-10 Female to NEX10 Male Cable SPF-250 Coax in 100 cm Using Times Microwave Parts | 1 : $149.4 10 : $137.11 25 : $134.0 50 : $129.91
|
| 0
 |
FMCA1923-100CM
| Fairview Microwave Inc | RF Cable Assemblies Plenum Low PIM NEX10 Male to NEX10 Male Cable SPP-250-LLPL Coax in 100 cm Using Times Microwave Parts | 1 : $157.94 10 : $144.95 25 : $141.66 50 : $137.33
|
| 0
 |
PE3C6223-100CM
| Pasternack Enterprises | RF Cable Assemblies Plenum Snap-On 4.3-10 Male to N Male Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts RoHS : Compliant | 1 : $170.74 10 : $145.15 25 : $138.3 50 : $132.71
|
| 0
 |
FMHR0123-100CM
| Fairview Microwave Inc | RF Cable Assemblies RA SMA Male to TNC Male MIL-DTL-17 Cable M17/28-RG58 Coax in 100 cm | 1 : $338.1 10 : $335.05 25 : $314.12
|
| 0
 |
PE3M0123-100CM
| Pasternack Enterprises | RF Cable Assemblies MIL-DTL-17 SMA Male Right Angle to TNC Male Cable 100 cm Length Using M17/183-00001 Coax RoHS : Compliant | | 0
 |
PE3W11623-100CM
| Pasternack Enterprises | RF Cable Assemblies Bordeaux FAKRA Plug to Bordeaux FAKRA Jack Low Loss Cable 100 cm Length Using LMR-100 Coax | 1 : $56.16 10 : $47.88 25 : $45.82
|
| 0
 |
 Newark | FMC00323-100CM
| Fairview Microwave Inc | Rf/Coaxial Cbl Assy, Low Loss, 3.3 Ft; |Fairview Microwave FMC00323-100CM RoHS : Not Compliant | | 154
 |
FMC00423-100CM
| Fairview Microwave Inc | Rf - Coaxial Cable Assemblies; |Fairview Microwave FMC00423-100CM RoHS : Not Compliant | | 29
 |
FMCA1923-100CM
| Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMCA1923-100CM RoHS : Not Compliant | | 14
 |
FMCA2823-100CM
| Fairview Microwave Inc | Sma Female-Sma Female Cbl; |Fairview Microwave FMCA2823-100CM RoHS : Not Compliant | | 10
 |
FMCA1823-100CM
| Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMCA1823-100CM RoHS : Not Compliant | 1 : $127.66 5 : $119.8 10 : $114.51 25 : $109.68
|
| 3
 |
FMHR0123-100CM
| Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 3.3 Ft, 1M, Rg58; |Fairview Microwave FMHR0123-100CM RoHS : Not Compliant | | 1
 |
FMCA2923-100CM
| Fairview Microwave Inc | Tnc Male-Tnc Female Blkd Cbl; |Fairview Microwave FMCA2923-100CM RoHS : Not Compliant | | 1
 |
FMCA3023-100CM
| Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA3023-100CM RoHS : Not Compliant | | 1
 |
23100C
| Murata Power Solutions | Inductor, 10Uh 1.02A Miniature Sm; |Murata Power Solutions 23100C RoHS : Compliant | 2,000 : $0.664 4,000 : $0.651 6,000 : $0.637 10,000 : $0.624 20,000 : $0.611 50,000 : $0.598 100,000 : $0.584 200,000 : $0.571
|
| 0
 |
CCP2-3-100CF
| Eaton Bussmann | Fused Switch, 3P, 100A, 600V, Screw; Contact Configuration:-; Fuse Size Held:Class Cf; No. Of Fuses:3 Fuse; Contact Current Ac Max:100A; Contact Voltage Ac Max:600V; Switch Terminals:Screw; No. Of Poles:3 Pole Rohs Compliant: Yes RoHS : Compliant | | 0
 |
FMHR0223-100CM
| Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMHR0223-100CM RoHS : Not Compliant | | 0
 |
FMCA1723-100CM
| Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMCA1723-100CM RoHS : Not Compliant | | 0
 |
FMHR0023-100CM
| Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 3.3 Ft, 1M, Rg142; |Fairview Microwave FMHR0023-100CM RoHS : Not Compliant | | 0
 |
462A023-100-CS-1972-0
| TE Connectivity | Heat Shrink Cable Boots&end Caps; |Te Connectivity Raychem 462A023-100-CS-1972-0 RoHS : Not Compliant | 1 : $66.36 5 : $65.6 10 : $64.84 25 : $63.54 50 : $62.25 100 : $60.95 250 : $59.65
|
| 0
 |
382A023-100-CS-1972-0
| TE Connectivity | 382A023-100-Cs-1972-0; |Te Connectivity Raychem 382A023-100-CS-1972-0 RoHS : Not Compliant | | 0
 |
 RS | CCP2-3-100CF
| Eaton Bussmann | COMPACT CIRCUIT PROTECTOR, SWITCH ONLY, CUBEFUSE,3POLE,100A | 1 : $701.09 10 : $666.04 25 : $630.98
|
| 2
 |
2770323100CN
| Metal Work Pneumatic USA Inc | CYLINDER, RODLESS | | 0
 |
2700323100CN
| Metal Work Pneumatic USA Inc | CYLINDER, RODLESS | | 0
 |
FMC00323-100CM
| Fairview Microwave Inc | LOW LOSS SSMC PLUG TO SMB PLUG CABLE RG-316 COAX IN 100 CM | 1 : $96.04 5 : $92.2 10 : $89.32
|
| 0
 |
FMHR0123-100CM
| Fairview Microwave Inc | RA SMA MALE TO TNC MALE MIL-DTL-17 CABLE M17/28-RG58 COAX IN 100 CM | | 0
 |
FMC00423-100CM
| Fairview Microwave Inc | RP SMA MALE TO RA QMA MALE CABLE LMR-240 COAX IN 100 CM | 1 : $116.98 5 : $111.13 10 : $107.63
|
| 0
 |
FMHR0223-100CM
| Fairview Microwave Inc | TEMPERATURE CONDITIONED LOW LOSS N FEMALE BULKHEAD TO RA N MALE CABLE LL160 COAX | | 0
 |
FMCA2823-100CM
| Fairview Microwave Inc | SMA FEMALE TO SMA FEMALE CABLE RG402 TYPE .141 COAX IN 100 CM | | 0
 |
FMCA1723-100CM
| Fairview Microwave Inc | LOW LOSS RA N MALE TO TNC FEMALE BULKHEAD CABLE LL160 COAX IN 100 CM | | 0
 |
FMCA2923-100CM
| Fairview Microwave Inc | TNC MALE TO TNC FEMALE BULKHEAD CABLE RG405 TYPE .086 COAX IN 100 CM | | 0
 |
FMCA1923-100CM
| Fairview Microwave Inc | PLENUM LOW PIM NEX10 MALE TO NEX10 MALE CABLE SPP-250-LLPL COAX IN 100 CM USING | 1 : $148.01 5 : $137.65 10 : $130.25
|
| 0
 |
FMHR0023-100CM
| Fairview Microwave Inc | SMA MALE TO SMA MALE MIL-DTL-17 CABLE M17/60-RG142 COAX IN 100 CM | | 0
 |
FMCA3023-100CM
| Fairview Microwave Inc | SNAP-ON BMA JACK TO SLIDE-ON BMA JACK 2 HOLE FLANGE CABLE TINNED ALUMINUM RG405 | | 0
 |
SU/13NA0231/00C
| Norgren | CYLINDER, ALUMINUM NFPA TIE ROD | | 0
 |
SPUS/19SN231/00C
| Norgren | CYLINDER, ALUMINUM TWIN ROD | | 0
 |
 Future Electronics | 23100C
| Murata Power Solutions | 2300 Series 10 uH ±10 % 1.02 A Unshielded Surface Mount Power Inductor RoHS : Compliant | | 0
 |
 Sager | 23100C
| Murata Power Solutions | Power Inductors - SMD 10 UH 1.02 A RoHS : Compliant | | 2,000
 |
462A023-100-CS-1972-0
| TE Connectivity | Heat Shrink Cable Boots & End Caps 462A023-100-CS1972-0 | 100 : $54.12 125 : $52.72 250 : $50.75
|
| 0
 |
382A023-100-CS-1972-0
| TE Connectivity | Heat Shrink Cable Boots & End Caps 382A023-100-CS1972-0 | 125 : $45.05 150 : $43.88 300 : $42.24
|
| 0
 |
CCP2-3-100CF
| Eaton Bussmann | Disconnect Switches 3 POLE CLASS CF COMPCT CIRC PROTECTR | | 0
 |
 Interstate Connecting Components | 462A023-100-CS-1972-0
| TE Connectivity | 462A023-100-CS-1972-0 | | 0
 |
382A023-100-CS-1972-0
| TE Connectivity | 722453-000 | 125 : $44.6945 160 : $42.9067
|
| 0
 |
 Avnet Abacus | 23100C
| Murata Manufacturing Co Ltd | (Alt: 23100C) RoHS : Compliant | | 0
 |
 Master Electronics | 462A023-100-CS-1972-0
| TE Connectivity | The 462A023-100-CS-1972-0 is a one-to-three cable transition boot made from a fluid-resistant elastomer designed for strain relief and mechanical protection of cable harness assemblies. MOQ Reduction RoHS : Compliant | 100 : $47.99 75 : $48.97 50 : $69.59 25 : $131.44 1 : $139.83
|
| 0
 |
382A023-100-CS-1972-0
| TE Connectivity | Heat Shrink Tubing MOQ Reduction RoHS : Compliant | 125 : $39.84 94 : $40.65 63 : $57.46 32 : $106.85
|
| 0
 |
462W023-100-CS-1972-0
| TE Connectivity | 462W023-100-CS-1972-0 MOQ Reduction RoHS : Compliant | 100 : $68.65 75 : $70.05 50 : $101.86 25 : $193.0
|
| 0
 |
CCP2-3-100CF
| Coiltronics | Compact Circuit Protector Switch Only CUBEFuse 3Pole 100A | Bussmann by Eaton CCP2-3-100CF RoHS : Compliant | 5 : $569.59 3 : $577.15 1 : $593.43
|
| 0
 |
 Neutron USA | CCP2-3-100CF
| Eaton Bussmann | Compact Circuit Protector,Switch Only,CUBEFuse,3Pole,100A | | 9
 |
 Pasternack Enterprises US | PE3W04423-100CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Female to SMA Male Right Angle Cable 100 cm Length Using LMR-240-UF Coax., Radio frequency assembly N female to SMA male right angle cable 100 cm length using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N female to SMA male right angle cable 100 cm length using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle SMA cable connection on the other. Our low loss type N to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This type N to SMA cable is a female to male coax assembly, PE3W04423-100CM, can also be known as a low loss N type jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. Type N jack to SMA plug cable assembly PE3W04423-100CM is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency type N female to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04423-100CM can also be used in the other direction and will be right angle SMA male to type N female cable assembly if the opposite connectivity is required. Low loss type N jack to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to SMA male right angle cable 100 cm length using LMR-240-UF coax. | 1 : $84.69 25 : $80.46 50 : $76.22 100 : $72.83
|
| 922
 |
PE3C6223-100CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum Snap-On 4.3-10 Male to N Male Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum snap-on 4.3-10 male to N male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum snap-on 4.3-10 male to N male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310MS-LP 4.3-10 to TC-250-NM-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310MS-LP 4.3-10 cable connection on one end and TC-250-NM-LP N type cable connection on the other. Our low PIM TC-SPP250-4310MS-LP 4.3-10 to TC-250-NM-LP type N cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-4310MS-LP 4.3-10 to TC-250-NM-LP type N cable is a male to male coax assembly, PE3C6223-100CM, can also be known as a low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-250-NM-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310MS-LP 4.3-10 plug to TC-250-NM-LP N type plug cable assembly PE3C6223-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310MS-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310MS-LP 4.3-10 to TC-250-NM-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310MS-LP 4.3-10 male to TC-250-NM-LP N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6223-100CM can also be used in the other direction and will be TC-250-NM-LP type N male to TC-SPP250-4310MS-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-250-NM-LP N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310MS-LP 4.3-10 to TC-250-NM-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310MS-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum snap-on 4.3-10 male to N male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts. | 1 : $84.19 25 : $79.98 50 : $75.77 100 : $72.4
|
| 74
 |
PE3W08023-100CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SSMC Plug to SMB Jack Bulkhead Cable 100 cm Using RG178 Coax., Radio frequency assembly SSMC plug to SMB jack bulkhead cable 100 cm using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMC plug to SMB jack bulkhead cable 100 cm using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMC cable connection on one end and SMB bulkhead cable connection on the other. Our SSMC to SMB cable assemblies have a plug gender on end 1 and jack on end 2. This SSMC to SMB cable is a plug to jack coax assembly, PE3W08023-100CM, can also be known as a SSMC male to SMB female cable assembly and will be shipped same-day as it is purchased. SSMC male to SMB female cable assembly PE3W08023-100CM is built with RG178 which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2 GHz maximum frequency SSMC plug to SMB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08023-100CM can also be used in the other direction and will be SMB jack bulkhead to SSMC plug cable assembly if the opposite connectivity is required. SSMC male to SMB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to SMB cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to SMB jack bulkhead cable 100 cm using RG178 coax. | 1 : $96.59 25 : $91.76 50 : $86.93 100 : $83.07
|
| 62
 |
PE3M0123-100CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. MIL-DTL-17 SMA Male Right Angle to TNC Male Cable 100 cm Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 SMA male right angle to TNC male cable 100 cm length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male right angle to TNC male cable 100 cm length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/56-3129 SMA to M39012/26-0010 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle M39012/56-3129 SMA cable connection on one end and M39012/26-0010 TNC cable connection on the other. Our right angle M39012/56-3129 SMA to M39012/26-0010 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/56-3129 SMA to M39012/26-0010 TNC cable is a male to male coax assembly, PE3M0123-100CM, can also be known as a MIL-DTL-17/MIL-C-17 right angle M39012/56-3129 SMA plug to M39012/26-0010 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/56-3129 SMA plug to M39012/26-0010 TNC plug cable assembly PE3M0123-100CM is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/56-3129 SMA cable assembly is manufactured with right angle M39012/56-3129 SMA to M39012/26-0010 TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/56-3129 SMA right angle male to M39012/26-0010 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0123-100CM can also be used in the other direction and will be M39012/26-0010 TNC male to right angle M39012/56-3129 SMA male cable assembly if the opposite connectivity is required. M39012/56-3129 SMA right angle plug to M39012/26-0010 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/56-3129 SMA to M39012/26-0010 TNC cable assembly for quick shipment worldwide. Variations of M39012/56-3129 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male right angle to TNC male cable 100 cm length using M17/28-RG58 coax. | 1 : $370.99 25 : $352.44 50 : $333.89
|
| 14
 |
PE3W04623-100CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Reverse Polarity SMA Female Bulkhead to SMA Male Cable 100 cm Length Using PE-SR405FLJ Coax., Radio frequency assembly reverse polarity SMA female bulkhead to SMA male cable 100 cm length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA female bulkhead to SMA male cable 100 cm length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA bulkhead cable connection on one end and SMA cable connection on the other. Our reverse polarity SMA to SMA cable assemblies have a female gender on end 1 and male on end 2. This reverse polarity SMA to SMA cable is a female to male coax assembly, PE3W04623-100CM, can also be known as a reverse polarity SMA jack to SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA jack to SMA plug cable assembly PE3W04623-100CM is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency reverse polarity SMA female bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04623-100CM can also be used in the other direction and will be SMA male to reverse polarity SMA female bulkhead cable assembly if the opposite connectivity is required. SMA reverse polarity jack bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA female bulkhead to SMA male cable 100 cm length using PE-SR405FLJ coax. | 1 : $100.99 25 : $95.94 50 : $90.89 100 : $86.85
|
| 12
 |
PE3W13423-100CM
| Pasternack Enterprises | Key Specifications, Connector 1 Series: MMBX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Snap-On MMBX Plug Right Angle to SMA Female Low Loss Cable 100 CM Length Using LMR-100 Coax., Radio frequency assembly snap-on MMBX plug right angle to SMA female low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The snap-on MMBX plug right angle to SMA female low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMBX to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle MMBX cable connection on one end and a SMA cable connection on the other. Our low loss right angle MMBX to SMA cable assembly has a plug gender on end 1 and a female on end 2. PE3W13423-100CM can also be known as a low loss right angle MMBX male to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13423-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle MMBX plug to SMA female cable has a maximum VSWR of 1.4:1. MMBX male to SMA jack cable assembly PE3W13423-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with right angle MMBX to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13423-100CM can also be used in the other direction and will be a SMA female to right angle MMBX plug cable assembly if the opposite connectivity is required. Low loss MMBX right angle male to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMBX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $68.49 25 : $65.07 50 : $61.64 100 : $58.9
|
| 0
 |
PE3W11623-100CM
| Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Bordeaux FAKRA Plug to Bordeaux FAKRA Jack Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly bordeaux FAKRA plug to bordeaux FAKRA jack low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Bordeaux FAKRA plug to bordeaux FAKRA jack low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our low loss FAKRA to FAKRA cable assemblies have a plug gender on end 1 and jack on end 2. PE3W11623-100CM can also be known as a low loss FAKRA male to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA male to FAKRA female cable assembly PE3W11623-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA plug to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11623-100CM can also be used in the other direction and will be FAKRA jack to FAKRA plug cable assembly if the opposite connectivity is required. Low loss FAKRA male to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bordeaux FAKRA plug to bordeaux FAKRA jack low loss cable 100 cm length using LMR-100 coax. | 1 : $40.09 25 : $38.09 50 : $36.08 100 : $34.48
|
| 0
 |
PE39423-100CM
| Pasternack Enterprises | | 1 : $137.99 25 : $131.09 50 : $124.19 100 : $118.67
|
| 0
 |
PE3C7823-100CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.1/9.5 Mini DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 4.1/9.5 Mini DIN Male Right Angle to 4.1/9.5 Mini DIN Male Right Angle Low PIM Cable 100 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 4.1/9.5 mini DIN male right angle to 4.1/9.5 mini DIN male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male right angle to 4.1/9.5 mini DIN male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.1/9.5 mini DIN cable connection on one end and right angle 4.1/9.5 mini DIN cable connection on the other. Our low PIM right angle 4.1/9.5 mini DIN to right angle 4.1/9.5 mini DIN cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable is a male to male coax assembly, PE3C7823-100CM, can also be known as a low PIM right angle 4.1/9.5 mini DIN plug to right angle 4.1/9.5 mini DIN plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN plug cable assembly PE3C7823-100CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with right angle 4.1/9.5 mini DIN to right angle 4.1/9.5 mini DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 4.1/9.5 mini DIN right angle male to 4.1/9.5 mini DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 4.1/9.5 mini DIN right angle plug to 4.1/9.5 mini DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male right angle to 4.1/9.5 mini DIN male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax. | 1 : $141.99 25 : $134.89 50 : $127.79 100 : $122.11
|
| 0
 |
PE3C8323-100CM
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to N Male Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male to N male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to N male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8323-100CM can also be known as a low PIM 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8323-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8323-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8323-100CM can also be used in the other direction and will be a type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. | 1 : $79.49 25 : $75.52 50 : $71.54 100 : $68.36
|
| 0
 |
PE3M0023-100CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. MIL-DTL-17 SMA Male to SMA Male Cable 100 cm Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 SMA male to SMA male cable 100 cm length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to SMA male cable 100 cm length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3028 SMA to M39012/55-3028 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3028 SMA cable connection on one end and M39012/55-3028 SMA cable connection on the other. Our M39012/55-3028 SMA to M39012/55-3028 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3028 SMA to M39012/55-3028 SMA cable is a male to male coax assembly, PE3M0023-100CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3028 SMA plug to M39012/55-3028 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3028 SMA plug to M39012/55-3028 SMA plug cable assembly PE3M0023-100CM is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/55-3028 SMA cable assembly is manufactured with M39012/55-3028 SMA to M39012/55-3028 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 12.4 GHz maximum frequency M39012/55-3028 SMA male to M39012/55-3028 SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/55-3028 SMA plug to M39012/55-3028 SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3028 SMA to M39012/55-3028 SMA cable assembly for quick shipment worldwide. Variations of M39012/55-3028 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to SMA male cable 100 cm length using M17/60-RG142 coax. | 1 : $292.99 25 : $278.34 50 : $263.69
|
| 0
 |
PE3W02623-100CM
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to N Male Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly SMA male to N male low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W02623-100CM can also be known as a low loss SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W02623-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02623-100CM can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 100 cm length using LMR-100 coax. | 1 : $72.39 25 : $68.77 50 : $65.15 100 : $62.26
|
| 0
 |
PE3W08323-100CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Smooth Bore SMP Male Bulkhead to SMP Female Cable 100 cm Using PE-SR405AL Coax., Radio frequency assembly smooth bore SMP male bulkhead to SMP female cable 100 cm using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Smooth bore SMP male bulkhead to SMP female cable 100 cm using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and SMP cable connection on the other. Our SMP to SMP cable assemblies have a male gender on end 1 and female on end 2. This SMP to SMP cable is a male to female coax assembly, PE3W08323-100CM, can also be known as a SMP plug to SMP jack cable assembly and will be shipped same-day as it is purchased. SMP plug to SMP jack cable assembly PE3W08323-100CM is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP male bulkhead to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08323-100CM can also be used in the other direction and will be SMP female to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this smooth bore SMP male bulkhead to SMP female cable 100 cm using PE-SR405AL coax. | 1 : $134.99 25 : $128.24 50 : $121.49 100 : $116.09
|
| 0
 |
PE3W08823-100CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. BNC Male to SMA Female Cable 100 CM Length Using RG174 Coax., Radio frequency assembly BNC male to SMA female cable 100 cm length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to SMA female cable 100 cm length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our BNC to SMA cable assemblies have a male gender on end 1 and female on end 2. This BNC to SMA cable is a male to female coax assembly, PE3W08823-100CM, can also be known as a BNC plug to SMA jack cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA jack cable assembly PE3W08823-100CM is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08823-100CM can also be used in the other direction and will be SMA female to BNC male cable assembly if the opposite connectivity is required. BNC plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA female cable 100 cm length using RG174 coax. | 1 : $129.99 25 : $123.49 50 : $116.99 100 : $111.79
|
| 0
 |
 Vyrian | CCP2-3-100CF
| Eaton Corporation | Thermal Circuit Breaker, 3 Pole(s), 100A, 600VAC, 125VDC, Panel Mount | | 15,356
 |
23100C
| Murata Manufacturing | General Purpose Inductor, 10uH, 1 Element, SMD, 1816 | | 10,501
 |