| Electronic Components Datasheet Search |
|
21044597 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | 440HS030M2104-4BH1 | Glenair Inc | - Bulk (Alt: 440HS030M2104-4BH1) RoHS : Not Compliant | 0 | ||
| 440HS030M2104-4 | Glenair Inc | - Bulk (Alt: 440HS030M2104-4) RoHS : Not Compliant | 0 | |||
| 226202-1044 | Molex | ZERO-HACHI BL R-R 4CKT 600MM DISC SN - Bulk (Alt: 2262021044) RoHS : Compliant |
| 0 | ||
| 319HS001M2104-4 | Glenair Inc | - Bulk (Alt: 319HS001M2104-4) RoHS : Not Compliant | 0 | |||
| RA3F2-104-4AF-5900 | Molex | - Bulk (Alt: RA3F2-104-4AF-5900) RoHS : Not Compliant |
| 0 | ||
| MMH21-0441A1 | Vishay Intertechnologies | - Bulk (Alt: MMH21-0441A1) |
| 0 | ||
| MMK21-044 | Vishay Intertechnologies | - Bulk (Alt: MMK21-044) |
| 0 | ||
| MAL210445332E3 | Vishay Intertechnologies | Electrolytic Capacitor, 3300 uF, 350 V, ? 20%, Screw, 5000 hours @ 105?C, Polar, 104 PHL-ST Series - Boxed Product (Development Kits) (Alt: MAL210445332E3) RoHS : Compliant |
| 0 | ||
| MMB21-044 | Vishay Intertechnologies | - Bulk (Alt: MMB21-044) |
| 0 | ||
| MMD21-0441D1 | Vishay Intertechnologies | - Bulk (Alt: MMD21-0441D1) RoHS : Compliant |
| 0 | ||
| RA3F2-104-4SA-5900 | Molex | - Bulk (Alt: RA3F2-104-4SA-5900) RoHS : Not Compliant |
| 0 | ||
| 319HS001NF2104-4T | Glenair Inc | - Bulk (Alt: 319HS001NF2104-4T) RoHS : Not Compliant | 0 | |||
| 5422-10-441116 | TE Connectivity | Heat Shrink Kit with Pre-Braid 22 Shell Size T-FIT Adapter/44 Size Molded Boot/11 Size Splice - Bag (Alt: 171481-000) RoHS : Not Compliant |
| 0 | ||
| 3022-10-441116-CS2359 | TE Connectivity | - Bag (Alt: 558405N001) RoHS : Not Compliant |
| 0 | ||
| MAL210447222E3 | Vishay Intertechnologies | Electrolytic Capacitor, 2200 uF, 450 V, ? 20%, Screw, 5000 hours @ 105?C, Polar, 104 PHL-ST Series - Boxed Product (Development Kits) (Alt: MAL210447222E3) RoHS : Compliant |
| 0 | ||
![]() Newark | 2842104-4 | TE Connectivity | Connector, Header, 4Pos, 1Row, 2Mm; Available Until Stocks Are Exhausted Alternative Available |Te Connectivity 2842104-4 RoHS : Compliant |
| 1,850 | |
| 2842104-4 | TE Connectivity | Connector, Header, 4Pos, 1Row, 2Mm; |Te Connectivity 2842104-4 RoHS : Compliant |
| 1,400 | ||
| 52104474 | Lapp Group | Adaptor, Reducer, M25/M20; |Lapp 52104474 RoHS : Compliant |
| 718 | ||
| 224092-1044 | Molex | Cable Assy, 4Pos, Plug-Free End, 600Mm; |Molex 224092-1044 RoHS : Compliant |
| 169 | ||
| MAL210446152E3 | Vishay Intertechnologies | Electrolytic Capacitor, Screw, 104 Phl-S; |Vishay MAL210446152E3 RoHS : Compliant |
| 111 | ||
| 74982104400 | Wurth Elektronik | Rj45 Conn, R/A Jack, 8P8C, 1Port, Th; |Würth Elektronik 74982104400 RoHS : Compliant |
| 110 | ||
| 52104497 | Lapp Group | Adaptor, Ma-Pg/M, Pg21 X M20; |Lapp 52104497 RoHS : Compliant |
| 38 | ||
| 52104477 | Lapp Group | Adaptor, Reducer, M32/M20; |Lapp 52104477 RoHS : Compliant |
| 34 | ||
| 52104493 | Lapp Group | Adaptor, Ma-Pg/M, Pg11 X M20; |Lapp 52104493 RoHS : Compliant |
| 30 | ||
| 3210442 | Phoenix Contact | Dinrail Terminal Block, 7Way, 10Awg, Gry; |Phoenix Contact 3210442 RoHS : Compliant |
| 23 | ||
| 52104494 | Lapp Group | Adaptor, Ma-Pg/M, Pg13.5 X M20; |Lapp 52104494 RoHS : Compliant |
| 23 | ||
| 52104473 | Lapp Group | Adaptor, Reducer, M25/M16; |Lapp 52104473 RoHS : Compliant |
| 15 | ||
| 52104498 | Lapp Group | Adaptor, Ma-Pg/M, Pg21 X M25; |Lapp 52104498 RoHS : Compliant |
| 10 | ||
| 52104499 | Lapp Group | Adaptor, Ma-Pg/M, Pg21 X M32; |Lapp 52104499 RoHS : Compliant |
| 6 | ||
| 21044 | Wiha Quality Tools | Insulated Deep Offset Wrench 3/8" Rohs Compliant: Yes |Wiha 21044 RoHS : Compliant |
| 0 | ||
![]() RS | 2104-440-AL-7 | RAF Electronic Hardware | STANDOFF, HEX, ALUMINUM, FEMALE, 4-40, 0.5" (12.7 MM), CLEAR IRIDITE |
| 14,847 | |
| 52104458 (6644511) | Lapp Group | GLAND ADAPTER ENLARGER METALLIC NICKEL PLATED BRASS M32 - M40 |
| 276 | ||
| 2104-440-N | RAF Electronic Hardware | 1/4 HEX FEMALE STANDOFF,1/4 HEX X 1/2 LENGTH |
| 173 | ||
| 66261121044 | Norton Winter | BLUEFIRE QUICK-CHANGE CLOTH DISC TYPE III 80 GRIT R884P ZA, 1-1/2 IN. |
| 100 | ||
| 3210442 (PT 4-PE/3L) | Phoenix Contact | TERMINAL BLOCK MOTOR FOUR LEVEL PUSHIN PT 4-PE/3L |
| 100 | ||
| 2104-440-AL | RAF Electronic Hardware | STANDOFF, HEX, ALUMINUM, FEMALE, 4-40, 0.5" (12.7 MM) |
| 88 | ||
| 53015210 (4442773) | Lapp Group | CABLE GLAND, SKINTOP SL, PG 9, POLYAMIDE, BLACK |
| 74 | ||
| 21044 | SCS | 2100R PUNCTURE RESISTANT METAL-OUT SHIELDING BAGS (SIZE 4 X 4) |
| 10 | ||
| 210440 | RS Pro | RED FLASHING LED PANEL MOUNT INDICATOR, 12V DC, 8MM MOUNTING SIZE, SOLDER TAB |
| 8 | ||
| 52104456 | Lapp Group | ENLARGERS, SKINDICHT ME-M, M25, M32, NBR, METALLIC RoHS : Compliant |
| 4 | ||
| 52104456 (6644502) | Lapp Group | ENLARGERS, SKINDICHT ME-M, M25, M32, NBR, METALLIC |
| 4 | ||
| 52104410 | Lapp Group | CABLE GLAND, SKINDICHT ZS-M, M32, PG 29, NICKEL-PLATED BRASS RoHS : Compliant |
| 2 | ||
| 52104492 | Lapp Group | ADAPTERS, SKINDICHT A MA PG/M, PG 11, M16, NICKEL-PLATED BRASS RoHS : Compliant |
| 1 | ||
| FX3-XTIO84002 (1044125) | SICK AG | SAFETY CONTROLLERSFLEXI SOFT / I/O MODULE |
| 1 | ||
| 21044 | Wiha Quality Tools | WRENCH; DEEP OFFSET; INSULATED; 3/8 INCH |
| 0 | ||
![]() Microchip Technology Inc | 5962-2221044QZC | Microchip Technology Inc | RTPF500ZT-1LG1509E, Projected EOL: 2051-06-23 - Contact for Pricing | 0 | ||
![]() Bisco Industries | MS21044D06 | ESNA | 930 | |||
| 2104-440-S-12 | RAF Electronic Hardware | 225 | ||||
| MS21044C7 | MS Nuts | 160 | ||||
| 2104-440-AL-24 | RAF Electronic Hardware | 77 | ||||
| MS21044C04B | MS Nuts | 61 | ||||
| 2104-440-AL-6 | RAF Electronic Hardware | 59 | ||||
| 2104-440-AL-22 | RAF Electronic Hardware | 55 | ||||
| MS21044B3 | MS Nuts | 42 | ||||
| 2104-440-AL-0 | Alpha Grainger Mfg Inc | 40 | ||||
| MS21044D4 | ESNA | 40 | ||||
| MS21044C10 | SPS Technologies | 35 | ||||
| MS21044D06 | MS Nuts | 34 | ||||
| MS21044D4 | NEW SURPLUS CELL 4 | 6 | ||||
| MS21044D4 | Greer Stop Nut Inc | 6 | ||||
| MS21044C10 | MS Nuts | 5 | ||||
![]() Sager | 0192210449 | Molex | BCL-3038-PL-R90 PLATED BENT 90DEG SPM | 0 | ||
| 10221044-00 | TE Connectivity | TE Connectivity FN3030-1KN-/Z35 | 0 | |||
| 9839021044 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| DK-621-0440-4SCS1874 | TE Connectivity | Data Bus Components - Connectors DK-621-0440-4SCS1874 | 0 | |||
| 9862221044 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 0011210444 | Molex | Other Tools AM-2161-SC16-91-15 STOP | 0 | |||
| 210-44-632-41-001000 | Mill-Max Mfg Corp | IC & Component Sockets 32P DIP SKT SOLDER TAIL RoHS : Compliant | 0 | |||
| 0192210443 | Molex | Molex | 0 | |||
| 2842104-4 | TE Connectivity | Board to Board & Mezzanine Connectors 4P,2MM,BRK HDR,SRVT SMD,0.76AU,TR W/CAP RoHS : Compliant | 0 | |||
| 9856321044 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 210-44-628-41-001000 | Mill-Max Mfg Corp | IC & Component Sockets 28P DIP SKT SOLDER TAIL RoHS : Compliant | 0 | |||
| 4022-10-441016 | TE Connectivity | Circular MIL Spec Strain Reliefs & Adapters 4022-10-441016 | 0 | |||
| 9855121044 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 2-104482-0 | TE Connectivity | Headers & Wire Housings CONN HOUSING 52 POS NON-POLARIZED RoHS : Compliant |
| 0 | ||
| 0011210446 | Molex | Molex | 0 | |||
![]() TME | 226202-1044 | Molex | Socket; female; 1A; 30V; PIN: 4; for cable; tinned; black |
| 730 | |
| 52104474 | Lapp Group | Reduction of threads for glands; M20; M25; polyamide; Pitch: 1.5 RoHS : Compliant |
| 452 | ||
| 52104473 | Lapp Group | Reduction of threads for glands; M16; M25; polyamide; Pitch: 1.5 RoHS : Compliant |
| 157 | ||
| 52104458LF | Lapp Group | Enlarger of threads for glands; M40; M32; brass; nickel |
| 50 | ||
| 52104477 | Lapp Group | Reduction of threads for glands; M20; M32; polyamide; Pitch: 1.5 RoHS : Compliant |
| 48 | ||
| 52104481 | Lapp Group | Reduction of threads for glands; M25; M40; polyamide; Pitch: 1.5 RoHS : Compliant |
| 44 | ||
| 52104499LF | Lapp Group | Thread adapter; M32; PG21; brass; nickel; SKINDICHT®; Pitch: 1.5 |
| 26 | ||
| 52104462LF | Lapp Group | Enlarger of threads for glands; M63; M50; brass; nickel RoHS : Compliant |
| 23 | ||
| 52104440 | Lapp Group | Thread adapter; PG48; M63; brass; nickel; SKINDICHT®; Pitch: 1.5 RoHS : Compliant |
| 8 | ||
| 52104469 | Lapp Group | Reduction of threads for glands; M50; M63; polyamide; Pitch: 1.5 RoHS : Compliant |
| 2 | ||
| 1751821044 | Weidmüller Interface GmbH & Co. KG | Label; white; THM; 48mm; -40÷150°C |
| 0 | ||
| 612-1-044-0-MTF-XS0 | MPE-Garry GmbH | Connector: pin strips; data; PIN: 44; 3A; vertical; 2.54mm; UL94V-0 RoHS : Compliant |
| 0 | ||
| 52104492LF | Lapp Group | Enlarger of threads for glands RoHS : Compliant |
| 0 | ||
| 06021044 | GSR | Drill bit; for metal,core; Ø: 44mm; bimetal,high speed steel |
| 0 | ||
| 52104475 | Lapp Group | Reduction of threads for glands; M12; M32; polyamide; Pitch: 1.5 RoHS : Compliant |
| 0 | ||
![]() Interstate Connecting Components | 2104-440-S-12 | RAF Electronic Hardware |
| 325 | ||
| 319HS001M2104-4 | Glenair Inc | RoHS : Compliant | 0 | |||
| 440HS030M2104-4BH1 | Glenair Inc | 0 | ||||
| 10221044-00 | TE Connectivity | FN3030-1KN-/Z35 | 0 | |||
| 319HS001NF2104-4T | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 5422-10-441116 | TE Connectivity | 5422-10-441116 RoHS : Not Compliant | 0 | |||
| 3022-10-441116-CS2359 | TE Connectivity | 3022-10-441116-CS2359 | 0 | |||
| 440HS030M2104-4 | Glenair Inc | BANDING BACKSHELL STRAIGHT W SHRINK BOOT RoHS : Compliant |
| 0 | ||
| RJMG221044430ER | Amphenol Commercial | RJMAG, 2X1,1000 BASE-T WITH L | 0 | |||
| 440HS069N2104-4 | Glenair Inc | BANDING BACKSHELL SELF-LOCK STRAIGHT W SHRINK BOOT |
| 0 | ||
| 61082-104402PLF | Amphenol FCi | BERGSTAK R4 100P-61082-104402P RoHS : Compliant | 0 | |||
| 2-104482-0 | TE Connectivity | 52 SHORT PT RCPT HSG DR .100CL RoHS : Compliant |
| 0 | ||
| 440HS031B2104-4B | Glenair Inc | 0 | ||||
| 440HS031N2104-4 | Glenair Inc | 0 | ||||
| 10127721-044SRLF | Amphenol FCi | 10127721-044SRLF-MTK 3.0 04P D | 0 | |||
![]() PEI Genesis | MS21044-N6 | SOURIAU-SUNBANK |
| 0 | ||
| MS21044-N8 | SOURIAU-SUNBANK |
| 0 | |||
| CA112104-4 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| MS21044-C5 | SOURIAU-SUNBANK |
| 0 | |||
| S694-210-44R | SOURIAU-SUNBANK |
| 0 | |||
| SE23G2104-4R | SOURIAU-SUNBANK |
| 0 | |||
| MS21044-N3 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 2842104-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 3,821 | |
| 2-104482-0 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 924 | ||
| 61082-104402LF | Amphenol FCi | Cable Assembly |
| 673 | ||
| 221044 | Erich Jaeger | 13P/12V PLUG EJH S MY INSU SEAL SET 1P |
| 96 | ||
| DK-621-0440-4S | TE Connectivity | Connectors RoHS : Not Compliant |
| 86 | ||
| DK-621-0440-4P-CS1498 | TE Connectivity | Connectors RoHS : Not Compliant |
| 9 | ||
| DK-621-0440-SM-L20 | TE Connectivity | Connectors RoHS : Not Compliant |
| 5 | ||
| 721-044 | Altech Corporation | GEOS-L DS/DK Safety Lid Screw Set |
| 3 | ||
| 5122-10-441114 | TE Connectivity | Connectors |
| 3 | ||
| 4022-10-441114 | TE Connectivity | Connectors RoHS : Not Compliant |
| 2 | ||
| DK-621-0440 | TE Connectivity | Connectors RoHS : Not Compliant |
| 1 | ||
![]() Chip 1 Exchange | 2842104-4 | TE Connectivity | INSTOCK RoHS : Compliant | 7,527 | ||
| MS21044C3 | INSTOCK | 200 | ||||
| MS21044-C06 | INSTOCK | 94 | ||||
| MS21044-C04 | INSTOCK | 25 | ||||
| MS21044N04 | INSTOCK | 20 | ||||
| GH92-10443A | INSTOCK | 8 | ||||
| GH92-10443A | Samsung Electro-Mechanics | INSTOCK | 5 | |||
![]() Avnet Abacus | 592104-4 | TE Connectivity | (Alt: 592104-4) RoHS : Compliant | 0 | ||
| 2842104-4 | TE Connectivity | Connector Unshrouded Header 4 Position 2mm Solder Straight TR (Alt: 2842104-4) RoHS : Compliant | 0 | |||
| 2-104482-0 | TE Connectivity | Conn Housing RCP 52 POS 254mm Crimp ST Cable Mount (Alt: 2-104482-0) RoHS : Compliant | 0 | |||
| 2-104482-0 | TE Connectivity | Conn Housing RCP 52 POS 254mm Crimp ST Cable Mount (Alt: 2-104482-0) RoHS : Compliant | 0 | |||
| 2244821044 | Molex | (Alt: 2244821044) RoHS : Compliant | 0 | |||
| 2162721044 | Molex | (Alt: 2162721044) RoHS : Compliant | 0 | |||
| M22-2210446 | Harwin | 200mm 0079 Pitch SIL Latched Horizontal PC Tail Pin Header shrouded tin 4 contacts (Alt: M22-2210446) RoHS : Compliant | 0 | |||
| MAL210445332E3 | Vishay Intertechnologies | Electrolytic Capacitor 3300 uF 350 V 20 Screw 5000 hours 105C Polar 104 PHLST Series (Alt: MAL210445332E3) RoHS : Compliant | 0 | |||
| MAL210447222E3 | Vishay Intertechnologies | Electrolytic Capacitor 2200 uF 450 V 20 Screw 5000 hours 105C Polar 104 PHLST Series (Alt: MAL210447222E3) RoHS : Compliant | 0 | |||
| MAL210445472E3 | Vishay Intertechnologies | Electrolytic Capacitor 4700 uF 350 V 20 Screw 5000 hours 105C Polar 104 PHLST Series (Alt: MAL210445472E3) RoHS : Compliant | 0 | |||
| MAL210446152E3 | Vishay Intertechnologies | Electrolytic Capacitor 1500 uF 400 V 20 Screw 5000 hours 105C Polar 104 PHLST Series (Alt: MAL210446152E3) RoHS : Compliant | 0 | |||
| MAL210446222E3 | Vishay Intertechnologies | Electrolytic Capacitor 2200 uF 400 V 20 Screw 5000 hours 105C Polar 104 PHLST Series (Alt: MAL210446222E3) RoHS : Compliant | 0 | |||
| RJMG221044430ER | Amphenol Corporation | (Alt: RJMG221044430ER) RoHS : Compliant | 0 | |||
| CRCW1210442KFKEA | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW1210442KFKEA) RoHS : Compliant | 0 | |||
| CRCW121044K2FKEAHP | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW121044K2FKEAHP) RoHS : Compliant | 0 | |||
![]() Avnet Asia | RJMG221044451ER | Amphenol Corporation | RJ45 2X1 GIGE+JACK RA .120L PTH R6 (Alt: RJMG221044451ER) RoHS : Compliant | 0 | ||
| 61082-104402LF | Amphenol Corporation | (Alt: 61082-104402LF) RoHS : Compliant | 0 | |||
| 0786421044 | Molex | (Alt: 0786421044) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 272-1044 | Radio Shack | IN STOCK SHIP TODAY |
| 2,500 | |
![]() DB Roberts | MS21044C08 | Military Specifications |
| 859 | ||
| MS21044N04 | Military Specifications |
| 12 | |||
| MS21044C7 | Military Specifications |
| 1 | |||
| 2104-440-AL-24 | RAF Electronic Hardware | 0 | ||||
| 2104-440-AL-6 | RAF Electronic Hardware | 0 | ||||
| 2104-440-S-12 | RAF Electronic Hardware | 0 | ||||
| 2104-440-AL-22 | RAF Electronic Hardware | HEX FEMALE STANDOFFS CLEAR ANODIZE | 0 | |||
| H3-60-221-044 | Southco | The swinghandle nests into the housing for minimal protrusion and pops up to swing smoothly for easy latch actuation. Robust die-cast zinc construction provides durable corrosion-resistant performance with optional gasketing for indoor or outdoor use. | 0 | |||
| 2104-440-SS | RAF Electronic Hardware | 0 | ||||
| 2104-440-AL-7 | RAF Electronic Hardware | HEX F STNDOFF CLR IRIDITE 1/4 HEX x 1/2 LNGTH | 0 | |||
| 2104-440-B | RAF Electronic Hardware | 0 | ||||
| 2104-440-S-28 | RAF Electronic Hardware | 0 | ||||
| 2104-440-SS-20 | RAF Electronic Hardware | STNLSS STL HEX TAP T | 0 | |||
| 2104-440-A-6 | RAF Electronic Hardware | 0 | ||||
| 2104-440-B-12 | RAF Electronic Hardware | 0 | ||||
![]() EBV Elektronik | SIM20-868 S2-1044J-Z080Y | SIMCom | RF Components (Alt: SIM20-868 S2-1044J-Z080Y) RoHS : Compliant | 0 | ||
![]() Master Electronics | 2104-440-AL-7 | RAF Electronic Hardware | Standoff Hex Aluminum Female 4-40 0.5 (12.7 mm) Clear Iridite | RAF 2104-440-AL-7 RoHS : Compliant |
| 650 | |
| DK-621-0440-4P-CS1498 | TE Connectivity | Conn Triaxial RoHS : Not Compliant |
| 13 | ||
| 226202-1044 | Molex | Zero-Hachi Bl R-R 4ckt 600mm disc Sn RoHS : Compliant |
| 0 | ||
| 10221044-00 | TE Connectivity | FN3030-1KN-/Z35 RoHS : Compliant |
| 0 | ||
| 5422-10-441116 | TE Connectivity | 5422-10-441116 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3022-10-441116-CS2359 | TE Connectivity | 3022-10-441116-CS2359 MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 2842104-4 | TE Connectivity | 4P 2MM BRK HDR SRVT SMD 0.76AU TR W/CAP RoHS : Compliant |
| 0 | ||
| 4022-10-441016 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 096521-0445 | ITT Interconnect Solutions | Conn Micro D-Subminiature SKT 37 POS Solder RA Thru-Hole 37 Terminal 1 Port RoHS : Not Compliant |
| 0 | ||
| 3022-10-441012-CS2359 | TE Connectivity | 3022-10-441012-CS2359 MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 2-104482-0 | TE Connectivity | 52 SHORT PT RCPT HSG DR .100CL RoHS : Compliant |
| 0 | ||
| 2104-440-SS | RAF Electronic Hardware | 1/4 HEX X 1/2 LENGTH RoHS : Compliant |
| 0 | ||
| DK-621-0440F-4P | TE Connectivity | DK-621-0440F-4P MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 592104-4 | TE Connectivity | PLUG SEALING SZ 21 MOQ Reduction RoHS : Compliant |
| 0 | ||
| DK-621-0440 | TE Connectivity | Conn Triaxial Solder ST Panel Mount RCP RoHS : Not Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W21044 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using PE-P086HF Coax, 18 GHz., Pasternack’s PE3W21044 SMA male to SMA male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W21044 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W21044 RF cable has an FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W21044 SMA plug to SMA plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a passivated stainless steel body with gold plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. | 21 | ||
| PE3W21044-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to SMA Male Cable 6 Inch Length Using PE-P086HF Coax, 18 GHz., Pasternack’s PE3W21044-6 SMA male to SMA male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W21044-6 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W21044-6 RF cable has an FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W21044-6 SMA plug to SMA plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a passivated stainless steel body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 21 | ||
| PE3W21044LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using PE-P086HF Coax with HeatShrink, LF Solder. PE3W21044LF/HS is a SMA male to SMA male cable using PE-P086HF coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21044LF/HS SMA male to SMA male cable assembly is constructed with PE-P086HF coax. | 0 | |||
| PE3W21044-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Cable 24 Inch Length Using PE-P086HF Coax, 18 GHz., Pasternack’s PE3W21044-24 SMA male to SMA male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W21044-24 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W21044-24 RF cable has an FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W21044-24 SMA plug to SMA plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a passivated stainless steel body with gold plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W21044-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Male Cable 48 Inch Length Using PE-P086HF Coax, 18 GHz., Pasternack’s PE3W21044-48 SMA male to SMA male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W21044-48 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W21044-48 RF cable has an FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W21044-48 SMA plug to SMA plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a passivated stainless steel body with gold plating. Additional dimensions, specifications, and CAD drawings for this 48-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W21044-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using PE-P086HF Coax, 18 GHz., Pasternack’s PE3W21044-36 SMA male to SMA male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W21044-36 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W21044-36 RF cable has an FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W21044-36 SMA plug to SMA plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a passivated stainless steel body with gold plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W21044-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Cable 12 Inch Length Using PE-P086HF Coax, 18 GHz., Pasternack’s PE3W21044-12 SMA male to SMA male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W21044-12 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W21044-12 RF cable has an FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W21044-12 SMA plug to SMA plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a passivated stainless steel body with gold plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W21044/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using PE-P086HF Coax with HeatShrink. PE3W21044/HS is a SMA male to SMA male cable using PE-P086HF coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21044/HS SMA male to SMA male cable assembly is constructed with PE-P086HF coax. | 0 | |||
| PE3W21044LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using PE-P086HF Coax, LF Solder. PE3W21044LF is a SMA male to SMA male cable using PE-P086HF coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21044LF SMA male to SMA male cable assembly is constructed with PE-P086HF coax. | 0 | |||
![]() Vyrian | MAL210445472E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 350V, 20% +Tol, 20% -Tol, 4700uF, Chassis Mount RoHS : Compliant | 12,085 | ||
| MAL210447152E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 450V, 20% +Tol, 20% -Tol, 1500uF, Chassis Mount RoHS : Compliant | 11,976 | |||
| MAL210446332E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 400V, 20% +Tol, 20% -Tol, 3300uF, Chassis Mount RoHS : Compliant | 10,830 | |||
| DK-621-0440-4S | TE Connectivity | RF Triaxial Connector, Female, Cable And Panel Mount, Solder Terminal, Jack RoHS : Not Compliant | 4,843 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |