| Electronic Components Datasheet Search |
|
19294 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Master Electronics | 1-929451-3 | TE Connectivity | FLA-STE-KONT.A-P4 8 RoHS : Compliant |
| 12,290 | |
| 1929464 | Pomona Electronics | Pomona 3548-0 Pin Tip Plug Safety Sleeve 5 A Brass Gold Plated Black 3548 Series RoHS : Compliant |
| 28 | ||
| 2-2331929-4 | TE Connectivity | SCL 1.0 HDR DRVT USP 048 SMT G3 TBK MOQ Reduction RoHS : Compliant |
| 0 | ||
| 0192940003 | Molex | Crimper Hand multi purpose (ABC-500) | Molex Incorporated 19294-0003 RoHS : Compliant |
| 0 | ||
| 1-929450-3 | TE Connectivity | FLA-STE-KONT.A-P1 5 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 4-2331929-4 | TE Connectivity | SCL 1.0 HDR DRVT USP 088 SMT G3 TBK MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1929494001 | TE Connectivity | RNF-3000-18/6-2-SP MOQ Reduction RoHS : Compliant |
| 0 | ||
| 0192940008 | Molex | Manual tool For Crimping non-insulated 8AWG thru 4/0 Terminals RoHS : Compliant |
| 0 | ||
| 1-2331929-4 | TE Connectivity | SCL 1.0 HDR DRVT USP 028 SMT G3 TBK MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1619294 | Phoenix Contact | Connector in molded plastic on both sides - length: 10 m - color of outer sheath: orange RAL 2003 RoHS : Compliant |
| 0 | ||
| 6-2331929-4 | TE Connectivity | SCL 1.0 HDR DRVT USP 028 SMT G3 TR MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3-2331929-4 | TE Connectivity | SCL 1.0 HDR DRVT USP 068 SMT G3 TBK MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1929424-1 | TE Connectivity | Cable Assembly MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1-929451-4 | TE Connectivity | FLA-STE-KONT.A-P4 8 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 0192940002 | Molex | Servicegrade Economy Cable Tie Tool RoHS : Compliant |
| 0 | ||
![]() Verical | 1-929451-3 | TE Connectivity | Tab Terminal Phosphor Bronze PIN 15.4mm Tin Over Nickel Reel RoHS : Compliant |
| 10,000 | |
| 1929492002 | TE Connectivity | Heat Shrink Tubing ST Polyolefin Red Thin Stick RoHS : Compliant |
| 1,320 | ||
| 1929424-1 | TE Connectivity | Flat Cable Assembly RoHS : Compliant |
| 278 | ||
| 1929425-1 | TE Connectivity | Power Cable Assemblies Flat/Ribbon Double-ended RoHS : Compliant |
| 221 | ||
| 1929410000 | Weidmüller Interface GmbH & Co. KG | Conn Wire to Board F 2 POS 7.62mm Solder RA Side Entry Thru-Hole Box |
| 200 | ||
| 1929430000 | Weidmüller Interface GmbH & Co. KG | Conn Wire to Board F 4 POS 7.62mm Solder RA Side Entry Thru-Hole Box |
| 200 | ||
| 1929440000 | Weidmüller Interface GmbH & Co. KG | Conn Wire to Board F 5 POS 7.62mm Solder RA Side Entry Thru-Hole Box |
| 100 | ||
| 1929460000 | Weidmüller Interface GmbH & Co. KG | Conn Wire to Board F 7 POS 7.62mm Solder RA Side Entry Thru-Hole Box |
| 100 | ||
| 1929450000 | Weidmüller Interface GmbH & Co. KG | Conn Wire to Board F 6 POS 7.62mm Solder RA Side Entry Thru-Hole Box |
| 100 | ||
| 19294-0003 | Molex | Crimper Insul/Non Insul Tool RoHS : Not Applicable |
| 33 | ||
| 192940002 | Molex | Cable Hand Tool Tie RoHS : Compliant |
| 30 | ||
| 192940008 | Molex | Application Tooling, Manual Tool for Crimping non-insulated 8AWG thru 4/0 Terminals RoHS : Not Applicable |
| 16 | ||
![]() Avnet Americas | 19294-0007 | Molex | - Bulk (Alt: 0192940007) RoHS : Not Compliant |
| 0 | |
| 19294-0052 | Molex | - Bulk (Alt: 0192940052) RoHS : Compliant |
| 0 | ||
| 1-929451-3 | TE Connectivity | - Tape and Reel (Alt: 1-929451-3) RoHS : Not Compliant |
| 0 | ||
| 1-929450-3 | TE Connectivity | - Tape and Reel (Alt: 1-929450-3) RoHS : Not Compliant |
| 0 | ||
| 19294-0043 | Molex | - Bulk (Alt: 0192940043) RoHS : Compliant |
| 0 | ||
| 1929420000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1929420000) RoHS : Not Compliant |
| 0 | ||
| 1929410000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1929410000) RoHS : Not Compliant |
| 0 | ||
| 1929450000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1929450000) RoHS : Not Compliant |
| 0 | ||
| 3-2331929-4 | TE Connectivity | - Rail/Tube (Alt: 3-2331929-4) RoHS : Not Compliant |
| 0 | ||
| 1929424-1 | TE Connectivity | - Bag (Alt: 1929424-1) RoHS : Compliant |
| 0 | ||
| 1929440000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1929440000) RoHS : Not Compliant |
| 0 | ||
| 1-929451-4 | TE Connectivity | FLA-STE-KONT.A-P4,8 - Tape and Reel (Alt: 1-929451-4) RoHS : Not Compliant |
| 0 | ||
| 1929460000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1929460000) RoHS : Not Compliant |
| 0 | ||
| MAL211929478E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, 4.7 uF, 100 V, -10%, +50%, 4000 hours @ 125?C, Axial Leaded - Tape and Reel (Alt: MAL211929478E3) RoHS : Compliant |
| 0 | ||
| 5-2331929-4 | TE Connectivity | Connector Unshrouded Header 10 Position 1mm Solder Straight Surface Mount - Tape and Reel (Alt: 5-2331929-4) RoHS : Not Compliant |
| 0 | ||
![]() Mouser Electronics | 1-929451-3 | TE Connectivity | Automotive Connectors FLA-STE-KONT.A-P4,8 RoHS : Compliant |
| 10,645 | |
| 19294-0002 | Molex | Other Tools Economy Cable Tie Tool RoHS : Compliant |
| 103 | ||
| 19294-0008 | Molex | Other Tools Manual Tool for Crimping Non-insulated 8 AWG thru 4/0 Terminals RoHS : Compliant |
| 27 | ||
| 19294-0003 | Molex | Crimpers / Crimping Tools ABC-500 RoHS : Compliant |
| 20 | ||
| 1929423 | Phoenix Contact | Fixed Terminal Blocks MKDS 1,5/ 8- 5,08 BK NZ 5080062 RoHS : Compliant |
| 0 | ||
| 1929481 | Phoenix Contact | Fixed Terminal Blocks MKKDSNH 1,5/ 2- 5,08 ANG.SCHR. RoHS : Compliant |
| 0 | ||
| 1929407 | Phoenix Contact | Fixed Terminal Blocks MKDS 1,5/ 4- 5,08 BK NZ 5040059 RoHS : Compliant |
| 0 | ||
| 1929494 | Phoenix Contact | Fixed Terminal Blocks MKKDSNH 1,5 3-5,08 ANG.SCHR. RoHS : Compliant |
| 0 | ||
| 1929410 | Phoenix Contact | Pluggable Terminal Blocks MKDS 1,5/ 8- 5,08 BK NZ 5080051 RoHS : Compliant |
| 0 | ||
| 1929436 | Phoenix Contact | Fixed Terminal Blocks MKDS 1,5/ 8- 5,08 BK NZ 5080052 RoHS : Compliant |
| 0 | ||
| 1929465 | Phoenix Contact | Fixed Terminal Blocks MKDS 1,5/ 8- 5,08 BK NZ 5080063 RoHS : Compliant |
| 0 | ||
| 1929449 | Phoenix Contact | Fixed Terminal Blocks MKDS 1,5/ 9- 5,08 BK NZ:5090053 RoHS : Compliant |
| 0 | ||
| 1929452 | Phoenix Contact | Fixed Terminal Blocks MKDS 1,5/ 9- 5,08 BK NZ:5090057 RoHS : Compliant |
| 0 | ||
| 1929410000 | Weidmüller Interface GmbH & Co. KG | Headers & Wire Housings BVL 7.62HP/02/270FI 3.5SN BK BX RoHS : Compliant |
| 0 | ||
| 1929420000 | Weidmüller Interface GmbH & Co. KG | Headers & Wire Housings BVL 7.62HP/03/270FI 3.5SN BK BX RoHS : Compliant |
| 0 | ||
![]() Newark | 19294-0002 | Molex | Cable Tie Tool, Etc-5; |Molex 19294-0002 RoHS : Compliant |
| 118 | |
| 19294-0002 | Molex | Cable Tie Tool; |Molex 19294-0002 RoHS : Not Compliant |
| 58 | ||
| FMCA1929-48 | Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMCA1929-48 RoHS : Not Compliant |
| 6 | ||
| 19294-0007 | Molex | Pneumatic Ferrule Hand Tool (192940007) |Molex 19294-0007 RoHS : Not Compliant |
| 0 | ||
| 19294-0052 | Molex | Hand Tool (Mht-202D) |Molex 19294-0052 RoHS : Not Compliant |
| 0 | ||
| 1-929451-3 | TE Connectivity | Connector Accessory, press Fit Pin, Autom; |Te Connectivity Amp 1-929451-3 RoHS : Not Compliant |
| 0 | ||
| 1-929450-3 | TE Connectivity | Fla-Ste-Kont.a-P1,5; |Te Connectivity Amp 1-929450-3 RoHS : Not Compliant |
| 0 | ||
| 19294-0043 | Molex | Mini Crimp (3 Nested)Hand Tool (Mc-3) |Molex 19294-0043 RoHS : Not Compliant |
| 0 | ||
| 1929420000 | Weidmüller Interface GmbH & Co. KG | Bvl 7.62Hp/03/270Fi 3.5Sn Bk Bx |Weidmuller 1929420000 RoHS : Not Compliant |
| 0 | ||
| 1929410000 | Weidmüller Interface GmbH & Co. KG | Bvl 7.62Hp/02/270Fi 3.5Sn Bk Bx |Weidmuller 1929410000 RoHS : Not Compliant |
| 0 | ||
| 1929450000 | Weidmüller Interface GmbH & Co. KG | Bvl 7.62Hp/06/270Fi 3.5Sn Bk Bx |Weidmuller 1929450000 RoHS : Not Compliant |
| 0 | ||
| 2-2331929-4 | TE Connectivity | Conn, Header, 48Pos, 2Row, 1Mm, Smt; Connector Systems:Board-To-Board; Pitch Spacing:1Mm; No. Of Rows:2Rows; No. Of Contacts:48Contacts; Contact Termination Type:Surface Mount Straight; Product Range:Ampmodu Small Centerline Rohs Compliant: Yes RoHS : Compliant |
| 0 | ||
| 4-2331929-4 | TE Connectivity | Conn, Header, 88Pos, 2Row, 1Mm, Smt; Connector Systems:Board-To-Board; Pitch Spacing:1Mm; No. Of Rows:2Rows; No. Of Contacts:88Contacts; Contact Termination Type:Surface Mount Straight; Product Range:Ampmodu Small Centerline Rohs Compliant: Yes RoHS : Compliant |
| 0 | ||
| 1-2331929-4 | TE Connectivity | Conn, Header, 28Pos, 2Row, 1Mm, Smt; Connector Systems:Board-To-Board; Pitch Spacing:1Mm; No. Of Rows:2Rows; No. Of Contacts:28Contacts; Contact Termination Type:Surface Mount Straight; Product Range:Ampmodu Small Centerline Rohs Compliant: Yes RoHS : Compliant |
| 0 | ||
| 6-2331929-4 | TE Connectivity | Conn, Pin Hdr, 28Pos, 2Row, 1Mm, Smt; Connector Systems:Board-To-Board; Pitch Spacing:1Mm; No. Of Rows:2Rows; No. Of Contacts:28Contacts; Contact Termination Type:Surface Mount Straight; Product Range:Ampmodu Series Rohs Compliant: Yes RoHS : Compliant |
| 0 | ||
![]() RS | VAD-3/8 (19294) | Festo | VACUUM GENERATOR, SZ1.5MM NOZZLE, G3/8 FEMALE THRD |
| 4 | |
| 3542-9 (1929447) | Pomona Electronics | PIN JACK WHITE 5 A 1500 V (RMS) POLYCARBONATE GOLD PLATED BRASS 115 DEGC |
| 4 | ||
| 3548-0 (1929464) | Pomona Electronics | PLUG PIN TIP W/SHIELD DIY BLACK |
| 3 | ||
| 19294-0002 (ETC-5) | Molex | ECONOMY CABLE TIE TOOL, 207129 SERIES |
| 3 | ||
| 3542-6 (1929401) | Pomona Electronics | PIN TIP JACK GOLD PL 10/PKG (BLUE) |
| 2 | ||
| 19294 | Desco Industries Inc | TEST LEADS, FOR DIGITAL SURFACE RESISTANCE METER, 1 PAIR |
| 1 | ||
| 1929426 | Altech Corporation | CORRUGATED TUBE, PS-BS, AHW, 26NW, SLIT, BLACK, CONTAINER QTY |
| 1 | ||
| 1929411 | Altech Corporation | CORRUGATED TUBE, PS-BS, AHW, 11NW, SLIT, BLACK, CONTAINER QTY |
| 0 | ||
| 19294-0007 | Molex | PNEUMATIC FERRULE HAND TOOL (192940007) |
| 0 | ||
| 19294-0052 | Molex | HAND TOOL (MHT-202D) |
| 0 | ||
| 19294-0003 (192940003) | Molex | CRIMPER, HAND, MULTI PURPOSE (ABC-500) |
| 0 | ||
| EAGF-P1-KF-25-50 (3192943) | Festo | GUIDE UNIT, EAGF-P1-KF-25-50 |
| 0 | ||
| 7010532628 (00051119294712) | 3M | Cubitron II Roloc Disc 984F, 80 YFweight, TS, 1 in, Die RS100N |
| 0 | ||
| 7010512388 (00051119294774) | 3M | CLOTH BELT 237AA, 4 IN X 11 IN, FILMLOK |
| 0 | ||
| 7010516621 (00051119294590) | 3M | CF Cloth Belt 347FC, 4 x 118 in |
| 0 | ||
![]() Bisco Industries | 19294-0002 | Molex | RoHS : Compliant | 3 | ||
![]() Onlinecomponents.com | 19294-0002 | Molex | Servicegrade Economy Cable Tie Tool RoHS : Compliant |
| 30 | |
| 19294-0008 | Molex | Manual tool For Crimping non-insulated 8AWG thru 4/0 Terminals RoHS : Compliant |
| 16 | ||
| 19294-0003 | Molex | Crimper, Hand, multi purpose (ABC-500) | Molex Incorporated 19294-0003 RoHS : Compliant |
| 13 | ||
| 19294 | Smiths Microwave | RoHS : Compliant |
| 1 | ||
| 19294 | Desco Industries Inc | RoHS : Compliant |
| 0 | ||
| 19294-0062 | Molex | Crimping, Stripping, Cutting Tools & Drills HAND CRIMPER 8.5IN RED HNDL RoHS : Compliant |
| 0 | ||
| 19294-0052 | Molex | HAND TOOL (MHT-202D) RoHS : Compliant |
| 0 | ||
| 19294-0043 | Molex | MINI CRIMP (3 NESTED)HAND TOOL (MC-3) RoHS : Compliant |
| 0 | ||
| 19294-0006 | Molex | wire splitting tool RoHS : Compliant |
| 0 | ||
| 19294-0007 | Molex | PNEUMATIC FERRULE HAND TOOL (192940007) RoHS : Compliant |
| 0 | ||
![]() Sager | 2-2331929-4 | TE Connectivity | Board to Board & Mezzanine Connectors SCL 1.0 HDR DRVT USP 048 SMT G3 TBK RoHS : Compliant | 0 | ||
| 0192940003 | Molex | Crimpers / Crimping Tools CRIMPER INSUL/NON INSUL 22-10 |
| 0 | ||
| 1-929451-3 | TE Connectivity | Automotive Connectors FLA-STE-KONT.A-P4,8 RoHS : Compliant |
| 0 | ||
| 0192940012 | Molex | Molex | 0 | |||
| 0192940049 | Molex | Molex | 0 | |||
| 1-929450-3 | TE Connectivity | Automotive Connectors FLA-STE-KONT.A-P1,5 RoHS : Compliant |
| 0 | ||
| CM3-X0-19-294-301-MA | Carling Technologies | Circuit Breakers | 0 | |||
| 4-2331929-4 | TE Connectivity | Board to Board & Mezzanine Connectors SCL 1.0 HDR DRVT USP 088 SMT G3 TBK RoHS : Compliant | 0 | |||
| 1929494001 | TE Connectivity | Other Tools RNF-3000-18/6-2-SP RoHS : Compliant |
| 0 | ||
| 0192940008 | Molex | Crimpers / Crimping Tools HAND TOOL |
| 0 | ||
| 2331929-4 | TE Connectivity | TE Connectivity SCL 1.0 HDR DRVT USP 008 SMT G3 TB RoHS : Compliant | 0 | |||
| 0192940001 | Molex | Molex | 0 | |||
| 1-2331929-4 | TE Connectivity | Board to Board & Mezzanine Connectors SCL 1.0 HDR DRVT USP 028 SMT G3 TBK RoHS : Compliant | 0 | |||
| 12019294501 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 8-2151929-4 | TE Connectivity | Bench Top Tools OC-PMC-AT-PA-S-F-MA | 0 | |||
![]() TME | 1929424-1 | TE Connectivity | 1929424-1 |
| 278 | |
| 1929425-1 | TE Connectivity | 1929425-1 |
| 221 | ||
| 1929410000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; female; power supply; 35A RoHS : Compliant |
| 200 | ||
| 1929430000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; female; power supply; 35A RoHS : Compliant |
| 200 | ||
| 1929460000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; female; power supply; 35A RoHS : Compliant |
| 100 | ||
| 1929450000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; power supply; 35A,41A; 1kV RoHS : Compliant |
| 100 | ||
| 1929440000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; female; power supply; 35A RoHS : Compliant |
| 100 | ||
| 19294-0003 | Molex | Crimping tool: dedicated; 22AWG÷10AWG; manual |
| 33 | ||
| 1929420000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; female; power supply; 41A RoHS : Compliant |
| 0 | ||
| 19294-0008 | Molex | Jaws RoHS : Compliant |
| 0 | ||
| 1929492002 | TE Connectivity | Heat shrink sleeve; flexible; 3: 1; 18mm; L: 1220mm; red RoHS : Compliant |
| 0 | ||
| 1929478 | Phoenix Contact | Connector: PCB terminal block; power supply; PIN: 1; spring clamp RoHS : Compliant |
| 0 | ||
![]() Interstate Connecting Components | 19294-0002 | Molex | CABLE TIE TOOL (ETC-5) RoHS : Compliant |
| 15 | |
| 419294001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCCGPT-3/1-4-SP | 0 | |||
| 1-929451-3 | TE Connectivity | FLA-STE-KONT.A-P4,8 RoHS : Compliant |
| 0 | ||
| 1-929450-3 | TE Connectivity | FLA-STE-KONT.A-P1,5 RoHS : Compliant | 0 | |||
| 3-2331929-4 | TE Connectivity | SCL 1.0 HDR DRVT USP 068 SMT G RoHS : Compliant |
| 0 | ||
| 1929424-1 | TE Connectivity | CABLE ASSEMBLY |
| 0 | ||
| 1-929451-4 | TE Connectivity | FLA-STE-KONT.A-P4,8 RoHS : Compliant | 0 | |||
| 1929496026 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCRNF-3000-18/6-2-60MM RoHS : Compliant | 0 | |||
| 0419294001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCCGPT-3/1-4-SP RoHS : Compliant | 0 | |||
| 5-2331929-4 | TE Connectivity | SCL 1.0 HDR DRVT USP 008 SMT G RoHS : Compliant | 0 | |||
| 759-192-94 | Glenair Inc | METAL CORE CABLE/CONDUIT | 0 | |||
| 2319294-1 | TE Connectivity | 025RF 19P CAP ASSY NAT RoHS : Compliant | 0 | |||
| 8-2331929-4 | TE Connectivity | SCL 1.0 HDR DRVT USP 068 SMT G RoHS : Compliant | 0 | |||
| 1929492002 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCRNF-3000-18/6-2-STK RoHS : Compliant | 0 | |||
| 1929496017 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCRNF-3000-18/6-2-35MM RoHS : Compliant | 0 | |||
![]() Avnet Abacus | 1929481 | Phoenix Contact | MKKDSNH 15 2508 ANGSCHR MKKDSNH152508ANGSCHR (Alt: 1929481) RoHS : Compliant | 0 | ||
| 1929494 | Phoenix Contact | MKKDSNH 15 3508 ANGSCHR MKKDSNH153508ANGSCHR (Alt: 1929494) RoHS : Compliant | 0 | |||
| 192940002 | Molex | Cable Accessories Hand Tool Tie (Alt: 192940002) RoHS : Not Compliant | 0 | |||
| 192940002 | Molex | Cable Accessories Hand Tool Tie (Alt: 192940002) RoHS : Not Compliant | 0 | |||
| 1929430-1 | TE Connectivity | AMP19294301 (Alt: 1929430-1) RoHS : Compliant | 0 | |||
| 1-929451-3 | TE Connectivity | AMP19294513 (Alt: 1-929451-3) RoHS : Compliant | 0 | |||
| 1-929450-3 | TE Connectivity | Contact PIN PressFit ST ThruHole Reel (Alt: 1-929450-3) RoHS : Compliant | 0 | |||
| 1929494001 | TE Connectivity | Cable Accessories Heat Shrinkable Tubing Polyolefin Red Spool (Alt: 1929494001) RoHS : Compliant | 0 | |||
| 1-929409-1 | TE Connectivity | TE MQS ABDECKKAPPE 32P (Alt: 1-929409-1) RoHS : Compliant | 0 | |||
| 1-929451-2 | TE Connectivity | (Alt: 1-929451-2) RoHS : Compliant | 0 | |||
| 8-2151929-4 | TE Connectivity | (Alt: 8-2151929-4) RoHS : Not Compliant | 0 | |||
| 3-2331929-4 | TE Connectivity | Connector Unshrouded Header 68 Position 1mm Solder Straight Surface Mount Tube (Alt: 3-2331929-4) RoHS : Compliant | 0 | |||
| MAL211929478E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor 47 uF 100 V 10 50 4000 hours 125C Axial Leaded - Tape and Reel (Alt: MAL211929478E3) RoHS : Compliant | 0 | |||
| MAL211929479E3 | Vishay Intertechnologies | 47uF 100V 10x30 125C 8000h - Tape and Reel (Alt: MAL211929479E3) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 1929494001 | TE Connectivity | (Alt: 1929494001) RoHS : Compliant | 0 | ||
![]() Component Electronics, Inc | VM6SSM2-1F11A19-29.4912MHZ | CTS Valpey Corporation | IN STOCK SHIP TODAY | 76 | ||
| 150-1077-01-92.9405MHZ | Saronix | IN STOCK SHIP TODAY |
| 25 | ||
![]() DB Roberts | 1219294 | Essentra Components | 0 | |||
![]() FDH Electronics | UL14291619294 | Judd Wire | Wire and Cable | 1,500 | ||
| UL14301619294 | Judd Wire | Wire and Cable |
| 950 | ||
| UL10611619294 | National Wire & Cable Corporation | Hook-Up Wire |
| 100 | ||
| 1929-440-1 | FDH Electronics | BJG Microwave C | 50 | |||
![]() Pasternack Enterprises US | PE3W19294-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Male Low PIM Cable 48 Inch Length Using TCOM-195 Coax., Radio frequency assembly SMA male to SMA male low PIM cable 48 inch length using TCOM-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male low PIM cable 48 inch length using TCOM-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low PIM SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W19294-48 can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W19294-48 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W19294-48 is built with TCOM-195 which is a flexible coax type. The Pasternack low passive intermodulation flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low PIM RF cable assembly as per your requirements. |
| 0 | |
| PE3W19294-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Low PIM Cable 36 Inch Length Using TCOM-195 Coax., Radio frequency assembly SMA male to SMA male low PIM cable 36 inch length using TCOM-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male low PIM cable 36 inch length using TCOM-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low PIM SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W19294-36 can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W19294-36 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W19294-36 is built with TCOM-195 which is a flexible coax type. The Pasternack low passive intermodulation flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W19294-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Low PIM Cable 12 Inch Length Using TCOM-195 Coax., Radio frequency assembly SMA male to SMA male low PIM cable 12 inch length using TCOM-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male low PIM cable 12 inch length using TCOM-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low PIM SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W19294-12 can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W19294-12 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W19294-12 is built with TCOM-195 which is a flexible coax type. The Pasternack low passive intermodulation flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W19294-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to SMA Male Low PIM Cable 60 Inch Length Using TCOM-195 Coax., Radio frequency assembly SMA male to SMA male low PIM cable 60 inch length using TCOM-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male low PIM cable 60 inch length using TCOM-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low PIM SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W19294-60 can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W19294-60 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W19294-60 is built with TCOM-195 which is a flexible coax type. The Pasternack low passive intermodulation flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W19294-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Low PIM Cable 24 Inch Length Using TCOM-195 Coax., Radio frequency assembly SMA male to SMA male low PIM cable 24 inch length using TCOM-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male low PIM cable 24 inch length using TCOM-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low PIM SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W19294-24 can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W19294-24 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W19294-24 is built with TCOM-195 which is a flexible coax type. The Pasternack low passive intermodulation flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W19294LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using TCOM-195 Coax with HeatShrink, LF Solder. PE3W19294LF/HS is a SMA male to SMA male cable using TCOM-195 coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19294LF/HS SMA male to SMA male cable assembly is constructed with TCOM-195 coax. | 0 | |||
| PE3W19294/HS | Pasternack Enterprises | 0 | ||||
| PE3W19294 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Low PIM Cable Using TCOM-195 Coax., Radio frequency assembly SMA male to SMA male low PIM cable using TCOM-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male low PIM cable using TCOM-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low PIM SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W19294 can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W19294 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W19294 is built with TCOM-195 which is a flexible coax type. The Pasternack low passive intermodulation flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low PIM RF cable assembly as per your requirements. | 0 | |||
![]() Vyrian | 1929494 | Phoenix Contact | Barrier Strip Terminal Block, 13.5A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 9,303 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |