1812B-D8-R Price, Distributor, Stock

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

CAL1-8125-7.9

SHEREX FASTENING SO

FLEX18-12078

SHEREX FASTENING SO

HFHB-0518-12X

PennEngineering (PEM)

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

DM0218-1/2B

Essentra Components

0.218 ID 0.500 LENGTHPVC DIP Y

47-92-181-24

Southco

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

1812-1032AL7MODL3-3/8

RAF Electronic Hardware

11812

Essentra Components

STRAIGHT PLUG - NON THRDGREEN

FLEX18-12063

SHEREX FASTENING SO

FLEX18-12012

SHEREX FASTENING SO

FDH Electronics

M22759/18-12-1

Helistrand Inc

Wire and Cable

1 : $0.6
5 : $0.6
10 : $0.6
25 : $0.6
50 : $0.6
100 : $0.6
250 : $0.6
500 : $0.511
1,000 : $0.436
2,500 : $0.421
10,000 : $0.407

177

MS3456KS18-12BW

Corsair Electrical Connectors Inc

Connector

1 : $122.842
5 : $114.514
10 : $102.369
25 : $100.841
50 : $100.841
100 : $99.358
250 : $96.519
500 : $93.838
1,000 : $92.553
2,500 : $92.553
10,000 : $92.553

MS3456KS18-12S

Corsair Electrical Connectors Inc

Connector 5015

1 : $132.982
5 : $123.966
10 : $110.818
25 : $109.164
50 : $109.164
100 : $107.559
250 : $104.486
500 : $101.584
1,000 : $100.192
2,500 : $100.192
10,000 : $100.192

MS3450L18-12S

Corsair Electrical Connectors Inc

Circular Conn

1 : $60.556
5 : $56.45
10 : $50.463
25 : $49.71
50 : $49.71
100 : $48.979
250 : $47.58
500 : $46.258
1,000 : $45.624
2,500 : $45.624
10,000 : $45.624

MS3404D18-12D

Corsair Electrical Connectors Inc

Connector 5015

1 : $82.898
5 : $77.278
10 : $69.082
25 : $68.051
50 : $68.051
100 : $67.05
250 : $65.134
500 : $63.325
1,000 : $62.458
2,500 : $62.458
10,000 : $62.458

MS3451LS18-12PW-LC

Corsair Electrical Connectors Inc

Connector

1 : $105.448
5 : $98.299
10 : $87.874
25 : $86.562
50 : $86.562
100 : $85.289
250 : $82.852
500 : $80.551
1,000 : $79.447
2,500 : $79.447
10,000 : $79.447

711-1812-C13

Corsair Electrical Connectors Inc

Connector 38999

721-1812-D13

Corsair Electrical Connectors Inc

Connector 38999

SE9C1812A1.25-34

SOURIAU-SUNBANK

Backshells & Ac

370DS002NF1812A5

Glenair Inc

Connector
RoHS : Not Compliant

1 : $815.036
5 : $759.78
10 : $679.197
25 : $669.06
50 : $669.06
100 : $659.221
250 : $640.386
500 : $622.597
1,000 : $614.068
2,500 : $614.068
10,000 : $614.068

1218125-2

TE Connectivity

Connector
RoHS : Not Compliant

1 : $37.364
5 : $34.831
10 : $31.136
25 : $30.672
50 : $30.672
100 : $30.221
250 : $29.357
500 : $28.542
1,000 : $28.151
2,500 : $28.151
10,000 : $28.151

MS3181-22CAL

SPI Connects

Connector 26482

1 : $13.735
5 : $12.804
10 : $11.446
25 : $11.275
50 : $11.275
100 : $11.109
250 : $10.792
500 : $10.492
1,000 : $10.348
2,500 : $10.348
10,000 : $10.348

MS3181-22CAL

Glenair Inc

Backshells & Ac

1 : $436.244
5 : $436.244
10 : $384.922
25 : $363.537
50 : $363.537
100 : $350.554
250 : $338.466
500 : $338.466
1,000 : $327.183
2,500 : $327.183
10,000 : $316.629

MS3181-24RL

SPI Connects

Connector 26482

1 : $14.202
5 : $13.239
10 : $11.835
25 : $11.658
50 : $11.658
100 : $11.487
250 : $11.159
500 : $10.849
1,000 : $10.7
2,500 : $10.7
10,000 : $10.7

805-002-16NF18-12SA

Glenair Inc

Circular Conn
RoHS : Not Compliant

1 : $1,717.455
5 : $1,601.017
10 : $1,431.212
25 : $1,409.851
50 : $1,409.851
100 : $1,389.118
250 : $1,349.429
500 : $1,311.944
1,000 : $1,293.973
2,500 : $1,293.973
10,000 : $1,293.973

Flip Electronics

LPC1812JBD144E

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

1 : $10.07

692

LPC1812JBD144

NXP Semiconductors

Stock
RoHS : Compliant

240

Maritex

1812L150/24MR

Littelfuse Inc

PTC Resettable Fuses; 1812L150/24MR; LITTELFUSE; 3 A; 1.5 A; 20 A; 1812
RoHS : Compliant

5,000 : $0.051
2,000 : $0.056
1,000 : $0.064
150 : $0.085
50 : $0.101
5 : $0.135
1 : $0.4209

66,334

1812L075/33DR

Littelfuse Inc

PTC Resettable Fuses; 1812L075/33DR; LITTELFUSE; 1.5 A; 750 mA; 1812; 100 A
RoHS : Compliant

4,500 : $0.081
3,000 : $0.088
1,500 : $0.101
150 : $0.131
50 : $0.158
5 : $0.213
1 : $0.6658

59,027

1812L110/33MR

Littelfuse Inc

PTC Resettable Fuses; 1812L110/33MR; LITTELFUSE; 1.95 A; 1.1 A; 20 A; 1812
RoHS : Compliant

5,000 : $0.07
2,000 : $0.077
1,000 : $0.088
150 : $0.107
50 : $0.129
5 : $0.179
1 : $0.5587

49,023

1812L300/24SLER

Littelfuse Inc

PTC Resettable Fuses; 1812L300/24SLER; LITTELFUSE
RoHS : Compliant

1,000 : $1.038
500 : $1.14
100 : $1.339
30 : $1.589
10 : $1.916
1 : $2.5791

16,840

1812L050/60MR

Littelfuse Inc

PTC Resettable Fuses; 1812L050/60MR; LITTELFUSE; 1 A; 500 mA; 150 ms; 1812
RoHS : Compliant

5,000 : $0.215
2,000 : $0.235
1,000 : $0.263
150 : $0.342
50 : $0.401
5 : $0.541
1 : $1.6939

8,309

LPH-18-12

Mean Well

Power Supply; LED; 18W; 12V; 1.5A; 180-264VAC; 254-370VDC
RoHS : Compliant

20 : $6.901
10 : $7.1
5 : $7.401
1 : $7.801

1,970

MA1812XR-104K-501ERG 0.1UF 500V 10% X7R

Prosperity Dielectrics Co Ltd

Ceramic capacitor SMD; 1812; 100nF; 500V; X7R; 10%

12,000 : $0.393
4,000 : $0.449
1 : $0.679

1,161

MA1812XR-102K-302PR 1000PF 3000V 10% X7R

Prosperity Dielectrics Co Ltd

Ceramic capacitor SMD; 1812; 1nF; 3000V; X7R; 10%

12,000 : $0.556
4,000 : $0.633
1 : $0.959

1,000

430451812

Molex

Male Pin Headers; 430451812; MOLEX; 2; Tin; 18; Right Angle, Vertical

480 : $1.293
120 : $1.474
60 : $1.755
10 : $2.107
1 : $2.7475

954

MA1812CG-100J-302PR 10PF 3000V 5% NP0

POE

Ceramic capacitor SMD; 1812; 10pF; 3000V; NP0; 5%

250 : $0.133
100 : $0.151
1 : $0.212

401

MA1812CG-470J-302PR 47PF 3000V 5% NP0

POE

Ceramic capacitor SMD; 1812; 47pF; 3000V; NP0; 5%

200 : $0.137
1 : $0.157

356

HSA-0918-1200B

Shenzhen hongsense Technology Co Ltd

Antenna; stick; GSM; 850-2100MHz; 2.0dBi; VSWR<2.0; linear; omni-directional; RG174; 3m; SMA; magnetic; fi30x111mm; black

100 : $2.102
25 : $2.732
1 : $4.551

300

MA1812CG-101J-302PR 100PF 3000V 5% NP0

POE

Ceramic capacitor SMD; 1812; 100pF; 3000V; NP0; 5%

100 : $0.137
1 : $0.157

192

C1812C153KDRACTU

KEMET Corporation

Ceramic capacitor SMD; 1812; 15nF; 1000V; X7R; 10%
RoHS : Compliant

1,000 : $0.959
500 : $1.288
100 : $1.732
50 : $1.776
10 : $1.954
1 : $2.903

1812L075/24DR

Littelfuse Inc

PTC Resettable Fuses; 1812L075/24DR; LITTELFUSE; 750 mA; 1.5 A; 110 m?; 100 A
RoHS : Compliant

4,500 : $0.059
3,000 : $0.065
1,500 : $0.072
150 : $0.1
50 : $0.11
1 : $0.1444

Neutron USA

FTD1812GRM

Altech Corporation

Terminals WIRE CONNECTOR,2x18AWG/1.0sqmm

1 : $19.99

NHD-1.8-128160EF-SSXN-FT

Newhaven Display International

TFT Displays & Accessories 1.8in TFT SPI Touch Sunlight Readable
RoHS : Compliant

1 : $60.23

0218.125TXP

Littelfuse Inc

Cartridge Fuses 250V 125mA IEC TD LBC
RoHS : Compliant

1 : $39.99

QFWC-18-12-USCR

Qualtek Electronics Corporation

Wall Mount AC Adapter, 18W 5V, 9V, 12V, AC: NEMA 1-15P, DC: USB C Power Delivery

1 : $53.34

40.51.8.120.0000

FINDER SpA

PCB/Plug-In Relay, SPDT 10A, 120V AC coil, AgNi contact
RoHS : Compliant

1 : $34.99

KUMP-14A18-120

TE Connectivity

Relay; E-Mech; 3PDT; 15A; Ctrl-V 120AC; Vol-Rtg 277AC; 11 Pin; KUMP-14A18-120
RoHS : Not Compliant

1 : $104.99

SMI18-12-V-P6

CUI Inc

Wall Mount AC Adapters 19.2W12V1.6A 2.5plug w/blade kit Level VI
RoHS : Compliant

1 : $94.95

IME18-12BPSZC0S

SICK AG

Inductive proximity sensor, M18x1 Quasi-flush, R: 12mm, 10-30VDC, 0.5kHz PNP NO, M12 Conn M 4P

1 : $178.42

4C.01.8.120.0060SPA

FINDER SpA

Interface Module, SPDT 16A, 120V AC coil; Indicator, screw terminal socket

1 : $64.99

LPL-18-12

Mean Well

LED Power Supplies 18W 12V 1.5A

1 : $34.99

RKWT 3U-618/12F

Lumberg Connect GmbH

Cordset, 1/2-20, Female Right Angle, 3 Pole, 12 Feet, PVC, Yellow, 600000357

1 : $134.99

VL18-54-M-LAS/40A/118/128

PEPPERL + FUCHS AUTOMATION

PE Sensor, Polar Retro, R: 18m, 655nm, DC Push-pull L/D, M12 Conn

1 : $525.74

VL18-54-M/40A/118/128

PEPPERL + FUCHS AUTOMATION

PE Sensor, Polar Retro, M18 Barrel, R: 0-3.5m, DC Push-pull 4 in 1, L/D, M12 Conn

1 : $478.8

241-8-120

Signal Transformer Inc

Power Transformers 50\\60 Hz, Laminated Transformer

1 : $114.99

IMF18-12NPPNC0S

SICK AG

ProXimity Sensor,IMF,Lng Bdy M18 Barrel,12mm Rnge,NonFlush,DC 4Wire PNP Cmplmntry, M12 M Conn

1 : $194.59

Pasternack Enterprises US

PE3C0218-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Male Cable 12 Inch Length Using LMR-400-UF Coax., Radio frequency assembly N male to N male cable 12 inch length using LMR-400-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 12 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE3C0218-12, can also be known as a type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C0218-12 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 12 inch length using LMR-400-UF coax.

1 : $89.89
25 : $85.4
50 : $80.9
100 : $77.31

3,837

PE3W10618-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. QMA Male to TNC Male Cable 12 Inch Length Using RG142 Coax., Radio frequency assembly QMA male to TNC male cable 12 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The QMA male to TNC male cable 12 inch length using RG142 coax, QMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QMA cable connection on one end and TNC cable connection on the other. Our QMA to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W10618-12 can also be known as a QMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. QMA plug to TNC plug cable assembly PE3W10618-12 is built with RG142 which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with QMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency QMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10618-12 can also be used in the other direction and will be TNC male to QMA male cable assembly if the opposite connectivity is required. QMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to TNC cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male to TNC male cable 12 inch length using RG142 coax.

1 : $100.99
25 : $95.94
50 : $90.89
100 : $86.85

752

PE3518-12

Pasternack Enterprises

Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 12 inches. C Male to C Male Cable 12 Inch Length Using RG142 Coax., Radio frequency assembly C male to C male cable 12 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. C male to C male cable 12 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom C type to type C cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type C cable connection on one end and type C cable connection on the other. Our type C to C type cable assemblies have a male gender on end 1 and male on end 2. This C type to type C cable is a male to male coax assembly, PE3518-12, can also be known as a type C plug to C type plug cable assembly and will be shipped same-day as it is purchased. Type C plug to type C plug cable assembly PE3518-12 is built with RG142 which is a flexible coax type. The Pasternack flexible C cable assembly is manufactured with type C to C type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency type C male to type C male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type C plug to type C plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality C type to type C cable assembly for quick shipment worldwide. Variations of type C cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this C male to C male cable 12 inch length using RG142 coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

375

PE3M0318-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Pin to SMA Female Cable 12 Inch Length Using PE-141FL-NM Coax with HeatShrink, LF Solder. The PE3M0318-12 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ pin contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0318-12 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ pin to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0318-12 between-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. BMZ pin to SMA female cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0318-12 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to SMA RF cable are available on our downloadable PDF datasheet. BMZ pin to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to SMA RF cable assembly as per your requirements.

1 : $179.99
10 : $172.79
25 : $165.59
100 : $158.39

PE3C6181-24

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 24 inches. Plenum 7/16 DIN Male to 7/16 DIN Male Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male to 7/16 DIN male low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to 7/16 DIN male low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716M-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-SPP250-716M-LP 7/16 DIN cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716M-LP 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716M-LP 7/16 DIN cable is a male to male coax assembly, PE3C6181-24, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-716M-LP 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-716M-LP 7/16 DIN plug cable assembly PE3C6181-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716M-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-SPP250-716M-LP 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-716M-LP 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716M-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to 7/16 DIN male low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts.

1 : $124.99
25 : $118.74
50 : $112.49
100 : $107.49

PE3C0718-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Female to 2.92mm Female Cable 12 Inch Length Using PE-047SR Coax., Radio frequency assembly 2.92mm female to 2.92mm female cable 12 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female to 2.92mm female cable 12 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assemblies have a female gender on end 1 and female on end 2. PE3C0718-12 can also be known as a 2.92mm jack to 2.92mm jack cable assembly and will be shipped same-day as it is purchased. 2.92mm jack to 2.92mm jack cable assembly PE3C0718-12 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.92mm female to 2.92mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.92mm jack to 2.92mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm female to 2.92mm female cable 12 inch length using PE-047SR coax.

1 : $483.99
25 : $459.79
50 : $435.59
100 : $416.23

PE3W07181-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to TNC Male Right Angle Cable 24 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA male to TNC male right angle cable 24 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male right angle cable 24 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle TNC cable connection on the other. Our SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE3W07181-24, can also be known as a SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3W07181-24 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07181-24 can also be used in the other direction and will be right angle TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male right angle cable 24 inch length using PE-SR405FLJ coax.

1 : $72.79
25 : $69.15
50 : $65.51
100 : $62.6

PE3W18124/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using TCOM-400 Coax with HeatShrink. PE3W18124/HS is a N male right angle to N male right angle cable using TCOM-400 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18124/HS N male right angle to N male right angle cable assembly is constructed with TCOM-400 coax.

PE3C5918-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 50 Ohm SMA Male Right Angle to 75 Ohm BNC Male Right Angle Cable 12 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 50 Ohm SMA male right angle to 75 Ohm BNC male right angle cable 12 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 50 Ohm SMA male right angle to 75 Ohm BNC male right angle cable 12 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle BNC cable connection on the other. Our right angle SMA to right angle BNC cable assembly has male gender on end 1 and male on end 2. PE3C5918-12 can also be known as a right angle SMA plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to BNC plug cable assembly PE3C5918-12 is built with RG179 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C5918-12 RF cable are available on our downloadable PDF datasheet.PE3C5918-12 can also be used in the other direction and will be right angle BNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $126.99
25 : $120.64
50 : $114.29
100 : $109.21

PE3218-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to 7/16 DIN Male Cable 12 Inch Length Using RG214 Coax., Radio frequency assembly N male to 7/16 DIN male cable 12 inch length using RG214 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN male cable 12 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our type N to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE3218-12, can also be known as a type N plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. N type plug to 7/16 DIN plug cable assembly PE3218-12 is built with RG214 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7.5 GHz maximum frequency type N male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3218-12 can also be used in the other direction and will be 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Type N plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male cable 12 inch length using RG214 coax.

1 : $218.99
25 : $208.04
50 : $197.09

PE3W01812

Pasternack Enterprises

PE3C3918-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Female Bulkhead Low Loss Cable 12 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly N male to N female bulkhead low loss cable 12 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female bulkhead low loss cable 12 inch length using LMR-400 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and N type bulkhead cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and female on end 2. PE3C3918-12 can also be known as a low loss N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C3918-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3918-12 can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead low loss cable 12 inch length using LMR-400 coax with Times Microwave components.

1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47

PE3W18129LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack 2 Hole Flange to Snap-On BMA Jack Cable Using PE-SR402FLJ Coax with HeatShrink, LF Solder. PE3W18129LF/HS is a BMA jack 2 hole flange to BMA jack cable using PE-SR402FLJ coax. This Pasternack BMA jack 2 hole flange to BMA jack cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm BMA for connector 2. Our jack BMA 2 hole flange to jack BMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W18129LF/HS BMA jack 2 hole flange to BMA jack cable assembly is constructed with PE-SR402FLJ coax.

PE35118-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female 4 Hole Flange to SMA Female 4 Hole Flange Cable 12 Inch Length Using PE-047SR Coax., Radio frequency assembly SMA female 4 hole flange to SMA female 4 hole flange cable 12 inch length using PE-047SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to SMA female 4 hole flange cable 12 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and SMA 4 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE35118-12, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE35118-12 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 4 hole flange to SMA female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 4 hole flange to SMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to SMA female 4 hole flange cable 12 inch length using PE-047SR coax.

1 : $169.99
25 : $161.49
50 : $152.99

PE3M0418-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMPS, Connector 1 Size: 16, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Size: 16, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-P047, RF Cable Type: Coax, RF Cable Specification: PE-P047 datasheet, RF Cable Impedance : 50 Ohm. SMPS Size 16 Contact Socket to SMPS Size 16 Contact Socket Cable 12 Inch Length Using PE-P047 Coax with HeatShrink, LF Solder. The PE3M0418-12 from Pasternack is a D38999 contact cable assembly that is built with a size 16 SMPS socket contact connection on one end and a SMPS socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This SMPS to SMPS cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 50 GHz. The PE3M0418-12 RF cable has a FEP jacket of 0.056-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our SMPS socket to SMPS socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The PE3M0418-12 in-series RF cable has 90 dB of minimum RF shielding. SMPS socket to SMPS socket cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack PE3M0418-12 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this SMPS to SMPS RF cable are available on our downloadable PDF datasheet. SMPS socket to SMPS socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of SMPS cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMPS to SMPS RF cable assembly as per your requirements.

1 : $222.99
10 : $214.07
25 : $205.15
100 : $196.23

Relay Specialties

R1812-075-33-R

OptiFuse

PTC Fuse; 0.75 A; 33 VDC; 1812 SMD; Castellated

1 : $0.26
10 : $0.24
25 : $0.22
50 : $0.21
100 : $0.19

1,500

TE Connectivity

170181-2

TE Connectivity

205 FASTON,REC.,22-18 AWG,BR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 22 – 18 AWG Wire Size: .32 – .82 mm² Mating Tab Width: 5.21 mm Receptacle Uninsulated 22 – 18 AWG .32 – .82 mm² | Quick Disconnect | TE Connectivity
RoHS : Compliant

1,000 : $0.14
100 : $0.19
10 : $0.22
1 : $0.29

55,477

2-1318120-3

TE Connectivity

DYNAMIC D2100 REC HSG 3P SGL Y Number of Positions: 3 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp 3 Receptacle Housing With | TE Connectivity
RoHS : Compliant

2,500 : $0.73
1,000 : $0.75
500 : $0.77
250 : $0.78
100 : $0.8
50 : $0.82
25 : $0.84
10 : $0.86
1 : $0.88

34,402

181270-3

TE Connectivity

MOD 2 BUCHSE Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Flash Wire Size: 22 – 26 AWG Operating Voltage: 40 VAC Gold (Au) Socket Gold Flash 22 – 26 AWG | TE Connectivity
RoHS : Compliant

25,000 : $0.73
10,000 : $0.74
5,000 : $0.76
2,500 : $0.77
1,000 : $0.79
500 : $0.8
250 : $0.82
100 : $0.83
50 : $0.85
25 : $0.86
10 : $0.88
1 : $0.89

10,339

1-1318120-3

TE Connectivity

DYNAMIC D-2100 REC HSG 3P Number of Positions: 3 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp 3 Receptacle Housing With | TE Connectivity
RoHS : Compliant

2,500 : $0.69
1,000 : $0.71
500 : $0.73
250 : $0.75
100 : $0.77
50 : $0.79
25 : $0.81
10 : $0.82
1 : $0.84

10,231

181270-2

TE Connectivity

MOD II CONTACT L.P. Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Flash Wire Size: 23 – 26 AWG Operating Voltage: 40 VAC Gold (Au) Socket Gold Flash 23 – 26 AWG | TE Connectivity
RoHS : Compliant

10,000 : $0.56
5,000 : $0.57
2,500 : $0.59
1,000 : $0.6
500 : $0.61
250 : $0.62
100 : $0.64
50 : $0.65
25 : $0.66
10 : $0.67
1 : $0.69

6,824

160181-2

TE Connectivity

RING TONGUE IS 3.1-5.3 MM2 TPBR Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 12 – 10 AWG Wire Size: 3.1 – 5.3 mm² Wire Size: 6529 – 10382 CMA Stud Size: M6 Closed Ring Tongue Terminal 12 – 10 AWG 3.1 – 5.3 mm² 6529 – 10382 CMA | TE Connectivity
RoHS : Compliant

1,000 : $0.33
100 : $0.44
10 : $0.54
1 : $0.68

6,368

181271-2

TE Connectivity

MOD 2 CONTACT REC. Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Size: 30 – 28 AWG Wire Size: .05 – .09 mm² Termination Method to Wire & Cable: Crimp Gold (Au) Socket 30 – 28 AWG .05 – .09 mm² | TE Connectivity
RoHS : Compliant

10,000 : $0.81
5,000 : $0.83
2,500 : $0.85
1,000 : $0.87
500 : $0.89
250 : $0.9
100 : $0.92
50 : $0.94
25 : $0.96
10 : $0.98
1 : $0.99

4,829

181270-1

TE Connectivity

AMP-MODU CONTACT Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Flash Wire Size: 22 – 26 AWG Operating Voltage: 40 VAC Gold (Au) Socket Gold Flash 22 – 26 AWG | TE Connectivity
RoHS : Compliant

10,000 : $0.91
5,000 : $0.93
2,500 : $0.95
1,000 : $0.97
500 : $0.99
250 : $1.01
100 : $1.03
50 : $1.05
25 : $1.07
10 : $1.09
1 : $1.11

3,519

1318124-2

TE Connectivity

DYNAMIC D2100 HDR V ASSY 6P Y PdNi PL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 6 | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $3.75
500 : $3.86
250 : $3.98
100 : $4.09
50 : $4.2
25 : $4.32
10 : $4.43
1 : $4.54

2,319

1318123-2

TE Connectivity

DYNAMIC D2100 HDR V ASSY 3P Y PdNi PL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 3 | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $2.39
500 : $2.46
250 : $2.53
100 : $2.6
50 : $2.68
25 : $2.75
10 : $2.82
1 : $2.89

1,830

1318126-2

TE Connectivity

DYNAMIC D2100 HDR V ASSY 12P Y PdNi PL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 12 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 12 | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $5.68
500 : $5.85
250 : $6.02
100 : $6.19
50 : $6.37
25 : $6.54
10 : $6.71
1 : $6.88

1,581

1318124-1

TE Connectivity

DYNAMIC D2100 HDR V ASSY 6P PdNi PL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 6 | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $3.49
500 : $3.6
250 : $3.7
100 : $3.81
50 : $3.91
25 : $4.02
10 : $4.13
1 : $4.23

1,204

1318126-1

TE Connectivity

DYNAMIC D2100 HDR V ASSY 12P PdNi PL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 12 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 12 | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $5.58
500 : $5.75
250 : $5.92
100 : $6.09
50 : $6.26
25 : $6.43
10 : $6.6
1 : $6.77

1,137

281812-1

TE Connectivity

COVER FOR 25W. SPLASH PROOF CO Number of Positions: 25 Primary Product Color: Black Protection & Strain Relief Accessory Type: Cover Primary Product Material: Polyamide 6.6 GF Cable Exit Angle: 90 ° 25 Black Cover Polyamide 6.6 GF | TE Connectivity
RoHS : Compliant

500 : $1.29
250 : $1.61
100 : $1.93
50 : $2.57
1 : $3.86

468

2468181-2

TE Connectivity

LUMAWISE Endurance N+ 76mm, 5P, w/Vent Product Diameter: 76 mm Product Diameter: 3 in Lighting Connector Features Included: Vented Number of Positions: 5 Sealable: Yes 76 mm 3" Vented 5 | TE Connectivity
RoHS : Compliant

2,500 : $7.34
1,000 : $8.62
500 : $9.5
250 : $10.15
100 : $11.34
50 : $11.61
25 : $11.88
10 : $13.43
1 : $14.84

100