1756 Price, Distributor, Stock

PCB headers - nominal current: 16 A - rated voltage (III/2): 630 V - nominal cross section: 2.5 mm² - number of positions: 2 - pitch: 7.62 mm - color: green - contact surface: Tin - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 3.6 mm
RoHS : Compliant

7,500 : $1.93
5,000 : $1.96
2,500 : $1.98
1,000 : $2.04
500 : $2.06
250 : $2.18
100 : $2.31
50 : $2.46

1756566

Phoenix Contact

PCB headers - nominal current: 16 A - rated voltage (III/2): 630 V - nominal cross section: 2.5 mm² - number of positions: 10 - pitch: 7.62 mm - color: green - contact surface: Tin - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 3.6 mm
RoHS : Compliant

1,000 : $9.05
500 : $9.17
250 : $9.41
100 : $9.67
50 : $10.08
25 : $10.86
5 : $12.17

1617560

TE Connectivity

Low Signal Relays-PCB HFW1230K17=RELAY
RoHS : Not Compliant

67 : $115.25
1 : $126.775

3-175637-4

TE Connectivity

Conn Wire to Board RCP 4 POS Solder RA SMD T/R MOQ Reduction
RoHS : Compliant

7,500 : $0.901
5,625 : $0.919
3,750 : $1.337
1,875 : $2.533

51756-1

TE Connectivity

Connectors Headers & Wire Housings
RoHS : Compliant

4,500 : $2.34
1,500 : $2.44
550 : $2.55
150 : $2.65
25 : $2.76

VIP-PA-2X1426-4-0M1756062

Phoenix Contact

VIP-PA-2X14/26/ 4 0M/1756/062
RoHS : Compliant

5 : $165.56
1 : $174.27

UM-45-2FLK14/AB-1756

Phoenix Contact

VARIOFACE COMPACT LINE interface module for Allen-Bradley Controll-Logix with Controll-Logix-specific labeling no. of positions: 2 x 14 module width: 98 mm
RoHS : Compliant

3 : $185.41
1 : $195.17

IDSD-05-D-17.56-G

Samtec Inc

RoHS : Compliant

1,000 : $4.65
500 : $5.55
250 : $5.84
100 : $6.36
50 : $8.28
25 : $8.67
5 : $9.57

HDWM-17-56-G-D-505

Samtec Inc

Conn Board Stacker HDR 34 POS 1.27mm Solder ST Thru-Hole
RoHS : Compliant

2,500 : $2.31
1,000 : $3.22
500 : $4.01
250 : $4.53
100 : $4.73
50 : $6.37
25 : $6.39
5 : $7.87

2-1617567-1

TE Connectivity

JMACDD-5XLS=M39016/20-061L
RoHS : Compliant

100 : $89.26
50 : $96.48
20 : $163.58
10 : $163.99
5 : $179.19
1 : $190.01

121175-6021

ITT Interconnect Solutions

CA06FW10SL-4S-B-14; CA Bayonet; Circular
RoHS : Not Compliant

100 : $54.9
75 : $56.02
50 : $79.61
25 : $150.38

241-7-56L

Signal Transformer Inc

Power Transformer - Primary 115VAC - Secondary 56VCT@1A - Chassis Mount - Wire Leads
RoHS : Compliant

40 : $25.01
30 : $25.52
20 : $27.34
10 : $36.45
5 : $36.55
3 : $36.64
1 : $40.304

Pasternack Enterprises US

PE3W17569-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MMCX Plug to SMP Female Right Angle Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly MMCX plug to SMP female right angle cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to SMP female right angle cable 12 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a MMCX cable connection on one end and a right angle SMP cable connection on the other. Our MMCX to right angle SMP cable assembly has a plug gender on end 1 and a female on end 2. PE3W17569-12 can also be known as a MMCX male to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17569-12 RF cable has a FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our MMCX plug to right angle SMP female cable has a maximum VSWR of 1.4:1. MMCX male to SMP jack cable assembly PE3W17569-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with MMCX to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has the solder/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17569-12 can also be used in the other direction and will be a right angle SMP female to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMP cable assembly for quick shipment worldwide. Variations of MMCX and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to SMP RF cable assembly as per your requirements.

1 : $130.99
25 : $124.44
50 : $117.89
100 : $112.65

1,679

PE3W17569-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. MMCX Plug to SMP Female Right Angle Cable 9 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly MMCX plug to SMP female right angle cable 9 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to SMP female right angle cable 9 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a MMCX cable connection on one end and a right angle SMP cable connection on the other. Our MMCX to right angle SMP cable assembly has a plug gender on end 1 and a female on end 2. PE3W17569-9 can also be known as a MMCX male to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17569-9 RF cable has a FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our MMCX plug to right angle SMP female cable has a maximum VSWR of 1.4:1. MMCX male to SMP jack cable assembly PE3W17569-9 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with MMCX to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has the solder/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17569-9 can also be used in the other direction and will be a right angle SMP female to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMP cable assembly for quick shipment worldwide. Variations of MMCX and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to SMP RF cable assembly as per your requirements.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

1,674

PE3W17569-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. MMCX Plug to SMP Female Right Angle Cable 6 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly MMCX plug to SMP female right angle cable 6 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to SMP female right angle cable 6 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a MMCX cable connection on one end and a right angle SMP cable connection on the other. Our MMCX to right angle SMP cable assembly has a plug gender on end 1 and a female on end 2. PE3W17569-6 can also be known as a MMCX male to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17569-6 RF cable has a FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our MMCX plug to right angle SMP female cable has a maximum VSWR of 1.4:1. MMCX male to SMP jack cable assembly PE3W17569-6 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with MMCX to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has the solder/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17569-6 can also be used in the other direction and will be a right angle SMP female to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMP cable assembly for quick shipment worldwide. Variations of MMCX and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to SMP RF cable assembly as per your requirements.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

1,674

PE3W17569-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. MMCX Plug to SMP Female Right Angle Cable 18 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly MMCX plug to SMP female right angle cable 18 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to SMP female right angle cable 18 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a MMCX cable connection on one end and a right angle SMP cable connection on the other. Our MMCX to right angle SMP cable assembly has a plug gender on end 1 and a female on end 2. PE3W17569-18 can also be known as a MMCX male to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17569-18 RF cable has a FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our MMCX plug to right angle SMP female cable has a maximum VSWR of 1.4:1. MMCX male to SMP jack cable assembly PE3W17569-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with MMCX to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has the solder/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17569-18 can also be used in the other direction and will be a right angle SMP female to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMP cable assembly for quick shipment worldwide. Variations of MMCX and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to SMP RF cable assembly as per your requirements.

1 : $126.99
25 : $120.64
50 : $114.29
100 : $109.21

1,674

PE3C6175-60

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 60 inches. Plenum 4.3-10 Male to 4.3-10 Male Low PIM Cable 60 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to 4.3-10 male low PIM cable 60 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to 4.3-10 male low PIM cable 60 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-250-4310M-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-250-4310M-LP 4.3-10 cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-250-4310M-LP 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This TC-250-4310M-LP 4.3-10 to TC-250-4310M-LP 4.3-10 cable is a male to male coax assembly, PE3C6175-60, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-250-4310M-LP 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-250-4310M-LP 4.3-10 plug cable assembly PE3C6175-60 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-250-4310M-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-250-4310M-LP 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-250-4310M-LP 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-250-4310M-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to 4.3-10 male low PIM cable 60 inch length using SPP-250-LLPL coax using Times Microwave parts.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

PE51756

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SMB, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 4 GHz, Interface Type 1: .065 inch End Launch. SMB Jack Commercial Grade Connector Solder Attachment .065 inch End Launch PCB. PE51756 SMB jack PCB connector has an interface type of SMB jack which is compatible with .065 inch end launch cables and has an impedance of 50 Ohms. Pasternack's SMB jack connector uses solder as an attachment method. Our jack SMB PCB connector provides a maximum frequency of 4 GHz. Our high-quality radio frequency co-axial connector is used for general purpose test and printed circuit board applications. This SMB jack RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack SMB jack PCB connector has a PTFE dielectric type. Pasternack's SMB PCB connector has a brass body with gold plating. Our PE51756 SMB connector uses a gold-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. This SMB connector has a gold inner contact plating. Our SMB jack connector has a length of 0.46 inches, a width of 0.26 inches, and a weight of 0.8 lbs. This Pasternack commercial grade jack SMB connector will ship the same business day as purchased. Our SMB jack connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $7.69
25 : $7.31
50 : $6.92
100 : $6.61

PE3W17564

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to SMA Female 2 Hole Flange Cable Using PE-SR405FLJ Coax. PE3W17564 is a MCX plug right angle to SMA female 2 hole flange cable using PE-SR405FLJ coax. This Pasternack MCX plug right angle to SMA female 2 hole flange cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMA for connector 2. MCX right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to female SMA 2 hole flange cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W17564 MCX plug right angle to SMA female 2 hole flange cable assembly is constructed with PE-SR405FLJ coax.

PE3C1756LF/HS/PH180

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to MMCX Plug Right Angle Cable Using PE-SR405FLJ Coax with HeatShrink and 180 Deg. Clock, LF Solder. PE3C1756LF/HS/PH180 is a MMCX plug right angle to MMCX plug right angle cable using PE-SR405FLJ coax. This Pasternack MMCX plug right angle to MMCX plug right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MMCX for connector 2. MMCX right angle to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to plug MMCX right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C1756LF/HS/PH180 MMCX plug right angle to MMCX plug right angle cable assembly is constructed with PE-SR405FLJ coax.

PE3W17566

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. SMA Male to Push-On SMP Female Right Angle Cable Using PE-C100-LSZH Coax. PE3W17566 is a SMA male to SMP female right angle cable using PE-C100-LSZH coax. This Pasternack SMA male to SMP female right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. SMA to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17566 SMA male to SMP female right angle cable assembly is constructed with PE-C100-LSZH coax.

PE3W01756/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. 10-32 Male to BNC Male Cable Using RG316 Coax with HeatShrink. PE3W01756/HS is a 10-32 male to BNC male cable using RG316 coax. This Pasternack 10-32 male to BNC male cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm BNC for connector 2. Our male 10-32 to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01756/HS 10-32 male to BNC male cable assembly is constructed with RG316 coax.

PE3W17569LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to MMCX Plug Cable Using PE-SR405FLJ Coax, LF Solder. PE3W17569LF is a SMP female right angle to MMCX plug cable using PE-SR405FLJ coax. This Pasternack SMP female right angle to MMCX plug cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm MMCX for connector 2. SMP right angle to MMCX coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to plug MMCX cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W17569LF SMP female right angle to MMCX plug cable assembly is constructed with PE-SR405FLJ coax.

PE3C5175-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male to BNC Female Low Loss Cable 60 Inch Length Using LMR-240 Coax., Radio frequency assembly BNC male to BNC female low loss cable 60 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC female low loss cable 60 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a female on end 2. PE3C5175-60 can also be known as a low loss BNC plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5175-60 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our BNC male to BNC female cable has a maximum VSWR of 1.4:1. BNC plug to BNC jack cable assembly PE3C5175-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5175-60 can also be used in the other direction and will be a BNC female to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to BNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $73.89
25 : $70.2
50 : $66.5
100 : $63.55

PE3W17560

Pasternack Enterprises

PE3C1756LF

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to MMCX Plug Right Angle Cable Using PE-SR405FLJ Coax, LF Solder. PE3C1756LF is a MMCX plug right angle to MMCX plug right angle cable using PE-SR405FLJ coax. This Pasternack MMCX plug right angle to MMCX plug right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MMCX for connector 2. MMCX right angle to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to plug MMCX right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C1756LF MMCX plug right angle to MMCX plug right angle cable assembly is constructed with PE-SR405FLJ coax.

PE3C1756/HS/PH90

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to MMCX Plug Right Angle Cable Using PE-SR405FLJ Coax with HeatShrink and 90 Deg. Clock. PE3C1756/HS/PH90 is a MMCX plug right angle to MMCX plug right angle cable using PE-SR405FLJ coax. This Pasternack MMCX plug right angle to MMCX plug right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MMCX for connector 2. MMCX right angle to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to plug MMCX right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C1756/HS/PH90 MMCX plug right angle to MMCX plug right angle cable assembly is constructed with PE-SR405FLJ coax.

Vyrian

1756353

Phoenix Contact

Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

13,224

1731756

Phoenix Contact

Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

11,938

1756566

Phoenix Contact

Barrier Strip Terminal Block, 16A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

11,919

1756272

Phoenix Contact

Strip Terminal Block, 10A, 1 Row(s), 1 Deck(s)
RoHS : Compliant

11,603

1756418

Phoenix Contact

Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

11,294

MAX17563AUD+

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 1 Channel, +2V, BICMOS, PDSO14
RoHS : Compliant

10,616

1756434

Phoenix Contact

Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

10,025

MAX17562AUD+

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 1 Channel, +2V, BICMOS, PDSO14
RoHS : Compliant

8,546

1756485

Phoenix Contact

Barrier Strip Terminal Block, 16A, 1 Row(s), 1 Deck(s)
RoHS : Compliant

7,265

1756337

Phoenix Contact

Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

6,968

1756308

Phoenix Contact

Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

5,522

1756256

Phoenix Contact

Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

904

1756-OF8

Rockwell Automation

Logic Control Modules

877

1756-PA72

Rockwell Automation

Power Supply Modules/Adaptors

645

YE1756C3T4MFB

Advanced Micro Devices

Graphics Processor, CMOS

520

Win Source Electronics

UDZVTE-175.6B

ROHM Semiconductor

Diode Zener Single 5.6V 2% 200mW 2-Pin UMD T/R / DIODE ZENER 5.6V 200MW UMD2
RoHS : Compliant

25,645 : $0.0117
19,085 : $0.0131
14,815 : $0.0135
10,715 : $0.014
6,945 : $0.0144
2,845 : $0.0176

990,000

UDZSTE-175.6B

ROHM Semiconductor

DIODE ZENER 5.6V 200MW UMD2
RoHS : Compliant

6,090 : $0.0493
4,550 : $0.055
3,515 : $0.0569
2,555 : $0.0588
1,650 : $0.0607
680 : $0.0739

83,000

ACPL-217-56AE

Broadcom Limited

OPTOISOLATOR 3KV TRANS 4SOIC
RoHS : Compliant

1,025 : $0.2933
765 : $0.3271
595 : $0.3384
430 : $0.3497
280 : $0.361
115 : $0.4399

66,545

ACPL-217-560E

Broadcom Limited

OPTOISOLATOR 3KV TRANSISTOR 4-SO
RoHS : Compliant

1,810 : $0.1659
1,355 : $0.185
1,045 : $0.1914
760 : $0.1978
490 : $0.2041
205 : $0.2488

65,930

ACPL-217-56CE

Broadcom Limited

OPTOISOLATOR 3KV TRANS 4SOIC
RoHS : Compliant

855 : $0.3511
640 : $0.3916
495 : $0.4051
360 : $0.4186
235 : $0.4321
95 : $0.5266

65,810

ACPL-217-56DE

Broadcom Limited

OPTOISOLATOR 3KV TRANS 4SOIC
RoHS : Compliant

510 : $0.5925
380 : $0.6609
295 : $0.6837
215 : $0.7065
140 : $0.7292
60 : $0.8887

62,050

ACPL-217-56BE

Broadcom Limited

Optocoupler DC-IN 1-CH Transistor DC-OUT 4-Pin SO T/R / OPTOISOLATOR 3KV TRANSISTOR 4-SO
RoHS : Compliant

2,130 : $0.1409
1,710 : $0.1466
1,315 : $0.1523
920 : $0.1638
590 : $0.1695
280 : $0.181

50,000

HCPL-817-56BE

Broadcom Limited

OPTOISOLATOR 5KV TRANSISTOR 4SMD
RoHS : Compliant

1,005 : $0.2996
750 : $0.3342
580 : $0.3457
420 : $0.3572
275 : $0.3688
115 : $0.4494

30,000

LPC1756FBD80

Nexperia

IC MCU 32BIT 256KB FLASH 80LQFP

54 : $6.3268
43 : $6.584
33 : $6.8412
23 : $7.3556
15 : $7.6128
7 : $8.1271

29,995

LPC1756FBD80Y

Nexperia

IC MCU 32BIT 256KB FLASH 80LQFP / ARM® Cortex®-M3 series Microcontroller IC 32-Bit Single-Core 100MHz 256KB (256K x 8) FLASH 80-LQFP (12x12)

58 : $5.8271
47 : $6.07
36 : $6.3127
25 : $6.7983
16 : $7.0411
8 : $7.5266

28,130

HCPL-817-56CE

Broadcom Limited

Phototransistor Optocoupler High Density Mounting Type | OPTOISOLATOR 5KV TRANSISTOR 4SMD
RoHS : Compliant

1,535 : $0.219
1,150 : $0.2443
890 : $0.2527
645 : $0.2611
420 : $0.2696
175 : $0.3285

15,000

1756 Distributor

Link URL