 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
1730SLASHINTL Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | HCPL-817-30DE | Broadcom Limited | Optocoupler 1-CH Open Collector-OUT 5000Vrms 4-Pin SMD DIP Tube - Rail/Tube (Alt: HCPL-817-30DE) RoHS : Compliant |
| 26,737 | |
| SLG59M1730C | Renesas Electronics Corporation | - Tape and Reel (Alt: SLG59M1730C) RoHS : Compliant |
| 6,000 | ||
| CNY17-3-000E | Broadcom Limited | Optocoupler, Transistor Output, 1 Channel, DIP, 6 Pins, 60 mA, 5 kV, 100 % - Rail/Tube (Alt: CNY17-3-000E) RoHS : Compliant |
| 5,624 | ||
| 22-17-3032 | Molex | PCB Receptacle, 3 Contacts, 1 Row, 2.54mm, Gold, 2.5A, THT, Straight, Brass, Board-to-Board, Solder - Trays (Alt: 0022173032) RoHS : Compliant |
| 4,117 | ||
| 55917-3010 | Molex | Pin Header, 30 Contacts, 2 Rows, 2mm, Tin, 3A, Straight, Shrouded, Brass, Wire-to-Board, THT - Trays (Alt: 0559173010) RoHS : Compliant |
| 1,950 | ||
| 348A1730P6 REV P | Amphenol Corporation | CONNECTOR, ELECTRICAL, CIRCULAR, RECEPTACLE - Bulk (Alt: 348A1730P6 REV P) RoHS : Not Compliant | 19 | |||
| 7717-30N | Boyd Corporation | - Bulk (Alt: 034901) RoHS : Compliant |
| 0 | ||
| MW-04-03-G-D-173-080-FR | Samtec Inc | Board Stackers & Spacers, Pin Header, 4.39 mm, 8 Contacts, Solder, 2 Rows, 1 mm, MW Series - Tape and Reel (Alt: MW-04-03-G-D-173-080-FR) RoHS : Compliant |
| 0 | ||
| FJ-10-D-17.30-4 | Samtec Inc | - Bulk (Alt: FJ-10-D-17.30-4) RoHS : Compliant |
| 0 | ||
| KI1730530000G | Amphenol Corporation | - Bulk (Alt: KI1730530000G) RoHS : Compliant |
| 0 | ||
| FW-02-02-G-D-173-078 | Samtec Inc | Board Stackers & Spacers, Pin Header, 4.39 mm, 4 Contacts, Solder, 2 Rows, 1.27 mm, FW Series - Bulk (Alt: FW-02-02-G-D-173-078) RoHS : Compliant |
| 0 | ||
| 1-730236-4 | TE Connectivity | Insulation Crimper for Ocean Applicators - Bag (Alt: 1-730236-4) RoHS : Not Compliant | 0 | |||
| 7971730 | Amphenol Corporation | - Bulk (Alt: 7971730) RoHS : Not Compliant |
| 0 | ||
| 37173010 | TE Connectivity | - Bag (Alt: 1616272-6) RoHS : Not Compliant |
| 0 | ||
| 030-9173-003 | ITT Interconnect Solutions | - Bulk (Alt: 030-9173-003) RoHS : Compliant | 0 | |||
 Newark | 156120M173000 | Wurth Elektronik | Led, Rgb, 270/700/250Mcd, Smd; |Würth Elektronik 156120M173000 RoHS : Compliant |
| 3,659 | |
| 156120M173000 | Wurth Elektronik | Led, Rgb, 270/700/250Mcd, Smd; |Würth Elektronik 156120M173000 RoHS : Compliant |
| 3,659 | ||
| 21.17.3061 | Rotronic-Secomp AG | Conn, Rj45, Plug, Shld, 1Port, 8P8C, pk10; |Roline 21.17.3061 (Alternate Part Number: 7611990176618 RoHS : Compliant |
| 1,095 | ||
| DF17(3.0)-40DS-0.5V(57) | Hirose Electric Co Ltd | Mezzanine Conn, Rcpt, 40Pos; Mezzanine Connector Type:Receptacle; Pitch Spacing:0.5Mm; No. Of Rows:2Rows; No. Of Contacts:40Contacts; Connector Mounting:Surface Mount; Contact Material:Phosphor Copper; Product Range:Df17 Rohs Compliant: Yes RoHS : Compliant |
| 898 | ||
| GW-151730 | SPC Multicomp | Power Cord, Cee7/7 Plug-Iec60320 C19, 5M; |Multicomp Pro GW-151730 RoHS : Compliant |
| 566 | ||
| MAX17303G+ | Analog Devices Inc | Battery Fuel Gauge, Li-Ion, Li-Pol, 4.9V; |Analog Devices, Inc. MAX17303G+ RoHS : Compliant |
| 210 | ||
| 17-300050 | Amphenol CONEC | Protective Cap, Rj45, Pet; |Amphenol Conec 17-300050 RoHS : Compliant |
| 191 | ||
| 173010542 | Wurth Elektronik | Dc-Dc Converter, 5V, 1A, Sip; |Würth Elektronik 173010542 RoHS : Compliant |
| 129 | ||
| PT571730 | TE Connectivity | Relay, 4Pdt, 240Vac, 6A; |Te Connectivity Schrack PT571730 RoHS : Compliant |
| 120 | ||
| 6173-0-00-34-00-00-44-0 | Mill-Max Mfg Corp | .290" Long Custom Tecu Pin (Double Tail); |Mill-Max 6173-0-00-34-00-00-44-0 RoHS : Not Compliant |
| 101 | ||
| DF17(3.0)-40DS-0.5V(57) | Hirose Electric Co Ltd | Stacking Board Connector, Df17 Series, R; |Hirose/hrs DF17(3.0)-40DS-0.5V(57) RoHS : Compliant |
| 12 | ||
| SA4017-30 | Fairview Microwave Inc | Rf Fixed Attenuator; |Fairview Microwave SA4017-30 RoHS : Compliant |
| 10 | ||
| TR00003173-000 | TR Fastenings | Set Screw, Hex Head, M6 X 22Mm, Ss A2; |Tr Fastenings TR00003173-000 RoHS : Compliant |
| 2 | ||
| 1730 | Adafruit Industries | Flex Cable For Raspberry Pi Camera Or Display - 18/457Mm |Adafruit 1730 RoHS : Not Compliant |
| 0 | ||
| 1730 | Molex | Electrical Ac Adapter, 15A, 125V; Series |Molex 1730 RoHS : Not Compliant |
| 0 | ||
 Analog Devices Inc | MAX17301G+T | Analog Devices Inc | Model Gauge M5 1S TDFN RoHS : Compliant |
| 10,000 | |
| MAX17303X+ | Analog Devices Inc | ModelGauge M5 1S WLP RoHS : Compliant | 2,924 | |||
| MAX17301G+ | Analog Devices Inc | Model Gauge M5 1S TDFN RoHS : Compliant |
| 984 | ||
| MAX1730EUB+ | Analog Devices Inc | 50mA, Regulated, Step-Down Cha RoHS : Compliant |
| 938 | ||
| MAX17301X+T | Analog Devices Inc | ModelGauge M5 1S WLP RoHS : Compliant |
| 403 | ||
| MAX31730ATC+T | Analog Devices Inc | TRIPLE REMOTE TEMP SENSOR TDFN RoHS : Compliant |
| 324 | ||
| DC1730A | Analog Devices Inc | LT3973EMSE Demo Board I 42V, 7 |
| 131 | ||
| MAX31730ATC+ | Analog Devices Inc | TRIPLE REMOTE TEMP SENSOR TDFN RoHS : Compliant |
| 51 | ||
| LTC1730ES8-4.2#PBF | Analog Devices Inc | Lithium-Ion Bat Pulse Chrs w/ RoHS : Compliant |
| 39 | ||
| MAX31730UEVKIT# | Analog Devices Inc | Eval Kit For 3-Remote Temperat |
| 17 | ||
| MAX17302XEVKIT# | Analog Devices Inc | EVKIT for WLP MODELGAUGE M5 1S |
| 14 | ||
| MAX17302X+ | Analog Devices Inc | ModelGauge M5 1S WLP RoHS : Compliant | 0 | |||
| MAX17302G+T | Analog Devices Inc | Model Gauge M5 1S TDFN RoHS : Compliant |
| 0 | ||
| MAX17300X+T | Analog Devices Inc | ModelGauge M5 1S WLP RoHS : Compliant |
| 0 | ||
| MAX17300X+ | Analog Devices Inc | ModelGauge M5 1S WLP RoHS : Compliant | 0 | |||
 RS | 1730 | Heyco | STRAIN RELIEF BUSHING, .875", .125" PANEL THICKNESS, BLACK RoHS : Compliant |
| 1,489 | |
| 6173097 | RS Pro | PIEZO BUZZER 96DB 2300-3300HZ PANEL MOUNT 1.5-20VDC CONTINUOUS INTERNAL |
| 201 | ||
| 1SNA173059R0300 (017305903) | TE Connectivity | DCJ YELLOW TEST DEVICE, ENTRELEC |
| 19 | ||
| GS1730 | IKO International Inc | THRUST BEARING, THRUST NEEDLE ROLLER BEARING, OUTER RING |
| 8 | ||
| 1SNA173060R0000 (017306000) | TE Connectivity | DCO TEST ADAPTERS ORANGE |
| 7 | ||
| R133173050 | Bosch Rexroth | BUSHING SEAL RING WITH METAL CASE, DIA 30MM, OPEN, SUPER A & B |
| 5 | ||
| 9173021 | RS Pro | M16 X 55 MM HEX HEAD BOLT, CLASS 8.8 STEEL, ZINC PLATED, COARSE |
| 4 | ||
| IA26S (17301) | Banner Engineering Corp | FIBER OPTICS, PLASTIC FIBER, DIFFUSE, LENGTH 2M, FERRULE |
| 4 | ||
| 6173069 | RS Pro | BUZZER PIEZO 95DB 2900-3900HZ PCB MOUNT 3-20VDC CONTINUOUS INTERNAL |
| 3 | ||
| AZ17309 | IKO International Inc | THRUST BEARING, THRUST ROLLER BEARING |
| 3 | ||
| 51730050 | Lapp Group | REDUCERS, SKINDICHT KU PG, PG 29, PG 16, POLYAMIDE, LIGHT GREY RoHS : Compliant |
| 2 | ||
| BP1730-BATTERY (4389436) | Fluke Calibration | LI ION BATTERY PACK 3.7V 2500MAH FOR 1730 ENERGY LOGGER |
| 2 | ||
| R159011730 | Bosch Rexroth | ANGULAR CONTACT BEARING W/ AM LOCK NUT FOR BALL SCREW SHAFT 25MM LGN-B-1747 |
| 1 | ||
| 09300161730 | HARTING Technology Group | CONNECTOR, POWER, HEAVY DUTY, 16B CBL TO CBL PG 21 METAL 2 LEVERS RoHS : Compliant |
| 1 | ||
| 1730 | Adafruit Industries | FLEX CABLE FOR RASPBERRY PI CAMERA - 18 / 457MM |
| 0 | ||
 Microchip Technology Inc | TC1017-3.0VLTTR | Microchip Technology Inc | 80 mA Tiny CMOS w/Shutdown, SC70, Projected EOL: 2036-06-03 RoHS : Compliant |
| 63,000 | |
| TC1017-3.0VCTTR | Microchip Technology Inc | 150mA CMOS LDO with Shutdown, SOT-23, Projected EOL: 2036-07-29 RoHS : Compliant |
| 42,000 | ||
MIC5317-3.0YMT-TZ | Microchip Technology Inc | Single, High Performance 150mA LDO, UDFN, Projected EOL: 2041-01-14 RoHS : Compliant |
| 35,837 | ||
TC2117-3.0VDBTR | Microchip Technology Inc | 800mA Fixed Low Dropout Positive Regulator, SOT-223, Projected EOL: 2036-01-01 RoHS : Compliant |
| 11,667 | ||
| MIC5317-3.0YM5-TR | Microchip Technology Inc | Single, High Performance 150mA LDO, SOT-23, Projected EOL: 2041-01-09 RoHS : Compliant |
| 6,000 | ||
| MD1730-V/M2 | Microchip Technology Inc | 8-channel low phase noise CW transmit with digital phase delay for CW beamform, SQFN, Projected EOL: 2045-10-26 RoHS : Compliant |
| 1,049 | ||
| MIC5317-3.0YD5-TR | Microchip Technology Inc | Single, High Performance 150mA LDO, TSOT, Projected EOL: 2041-01-09 RoHS : Compliant |
| 944 | ||
| 107-00173-000 | Microchip Technology Inc | PROGRAMMED SSD CARD FOR ATS 6031A, Projected EOL: 2051-03-25 - Contact for Pricing | 0 | |||
| MIC5317-3.0YMT-T5 | Microchip Technology Inc | Single, High Performance 150mA LDO, UDFN, Projected EOL: 2028-10-18 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC5317-3.0YM5-T5 | Microchip Technology Inc | Single, High Performance 150mA LDO, SOT-23, Projected EOL: 2028-10-18 - Contact for Pricing RoHS : Compliant | 0 | |||
| MD-173-0013-10M0000000 | Microchip Technology Inc | MD-173-0013-10M0000000, Projected EOL: 2051-03-02 - Contact for Pricing | 0 | |||
| OH-1730-DAX-1085-10M0000000 | Microchip Technology Inc | OH-1730-DAX-1085-10M0000000, Projected EOL: 2051-05-12 - Contact for Pricing | 0 | |||
| OH-1730-BEX-1083-10M0000000 | Microchip Technology Inc | OH-1730-BEX-1083-10M0000000, Projected EOL: 2050-10-23 - Contact for Pricing | 0 | |||
| OH-1730-DEX-1084-10M0000000 | Microchip Technology Inc | OH-1730-DEX-1084-10M0000000, Projected EOL: 2051-05-12 - Contact for Pricing | 0 | |||
| OH-1730-DAX-1082-10M0000000 | Microchip Technology Inc | OH-1730-DAX-1082-10M0000000, Projected EOL: 2051-05-12 - Contact for Pricing | 0 | |||
 Rochester Electronics | PSMN017-30PL,127 | NXP Semiconductors | Power Field-Effect Transistor, 32A I(D), 1-Element, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant |
| 15,381 | |
PSMN017-30PL,127 | Nexperia | Power Field-Effect Transistor, 32A I(D), 1-Element, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant |
| 3,845 | ||
| 2SA1730S-TD-E | onsemi | Bipolar PNP Transistor, 3A 40V RoHS : Compliant |
| 6,894 | ||
| 05523-1730002 | Infineon Technologies AG | AUTO MCU | 95 | |||
| MAX17301G+ | Analog Devices Inc | Model Gauge M5 1S TDFN RoHS : Compliant |
| 293 | ||
| MAX17302G+T | Analog Devices Inc | Model Gauge M5 1S TDFN RoHS : Compliant |
| 7,500 | ||
| MAX17301G+T | Analog Devices Inc | Model Gauge M5 1S TDFN RoHS : Compliant |
| 2,500 | ||
| LTC1730ES8-4.2#PBF | Analog Devices Inc | Battery Charger IC Lithium Ion 4.2V 8-SOIC Tube RoHS : Compliant |
| 734 | ||
| SN751730PWR | Texas Instruments | Line Transceiver RoHS : Compliant |
| 4,000 | ||
CSD17303Q5 | Texas Instruments | Power Field-Effect Transistor, 100A I(D), 30V, 0.0037ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Not Compliant |
| 6,085 | ||
TLV71730PDQNR | Texas Instruments | IC VOLT REG Fixed 1 REG 3V 150mA 4-SON T/R RoHS : Compliant |
| 986 | ||
SN751730NS | Texas Instruments | Line Transceiver, 3 Func, 3 Driver, 3 Rcvr, BIPolar, PDSO20 RoHS : Compliant |
| 742 | ||
| LED173048RSLR | Texas Instruments | LED Matrix Driver RoHS : Compliant |
| 103,155 | ||
SN751730DW | Texas Instruments | Line Transceiver, 3 Func, 3 Driver, 3 Rcvr, BIPolar, PDSO20 RoHS : Compliant |
| 13,275 | ||
| CSD17303Q5 | National Semiconductor Corporation | Power Field-Effect Transistor, 100A I(D), 30V, 0.0037ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Not Compliant |
| 1,490 | ||
 Sager | CLE-173-01-G-DV-K-TR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | ||
| MW-04-03-G-D-173-080-FR | Samtec Inc | Board to Board & Mezzanine Connectors 1.00 mm Flex Stack, Flexible Micro Board Stacker, Surface Mount RoHS : Compliant |
| 0 | ||
| MW-12-03-H-D-173-088-A-FR | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| ASP-240173-01 | Samtec Inc | Samtec | 0 | |||
| 854-22-017-30-004101 | Mill-Max Mfg Corp | Headers & Wire Housings STD SPRING-LOADED CONNECTOR |
| 0 | ||
| AP105-GT17-30S(63) | Hirose Electric Co Ltd | Crimpers / Crimping Tools TOOL APP GT17 ACCESSORY | 0 | |||
| FJ-10-D-17.30-4 | Samtec Inc | FFC / FPC Jumper Cables 1.00 mm Flat Flex Cable RoHS : Compliant |
| 0 | ||
| TSW-117-30-F-S | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| W211730-1 | IDEC Corporation | Industrial Panel Mount Indicators / Switch Indicators MCNEIL C.S. | 0 | |||
| FW-02-02-G-D-173-078 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Micro Board Stacking Header, 0.050 Pitch RoHS : Compliant |
| 0 | ||
| 1-2499173-0 | TE Connectivity | QP 6.5 HDR ASSY, 2P, RED, TUBE PKG RoHS : Compliant |
| 0 | ||
| 1-730796-3 | TE Connectivity | Crimpers / Crimping Tools ANVIL, COMBINATION |
| 0 | ||
| 060-1730-03-01 | HONEYWELL TEST AND MEASUREMENT | BL113CV,1G,2U,6A,15A:MODEL 73, 1,000 LBS | 0 | |||
| CA2-X0-17-306-221-C | Carling Technologies | Circuit Breakers SPECIAL | 0 | |||
| DBU17-30K | Eaton Bussmann | DBU 17.1KV STD SPEED K EXPL FUSE 30A |
| 0 | ||
 TME | 22-17-3062 | Molex | Connector: wire-board; female; data; 4455; Inom: 2.5A; 500V; PIN: 6 RoHS : Compliant |
| 5,670 | |
| 201173-0008 | Molex | Pin header; male; PIN: 8; angled; 125V; 1.27mm; Plating: gold-plated |
| 3,808 | ||
| 100017307 | Telegartner Karl Gartner GmbH | Patch cord; S/FTP; Cat 6a; RJ45 plug,both sides; 1m; stranded; Cu |
| 10 | ||
| 1021730400 | Weidmüller Interface GmbH & Co. KG | Cable: for sensors; M12; PIN: 4; male,female; unshielded,straight RoHS : Compliant |
| 0 | ||
| 1173030400 | Weidmüller Interface GmbH & Co. KG | Patch cord; SF/UTP; Cat 5e; RJ45 plug,both sides; 40m; stranded RoHS : Compliant |
| 0 | ||
| 1331730000 | Weidmüller Interface GmbH & Co. KG | Connector: PCB terminal block; OMNIMATE; 20A; 300V,400V; PIN: 5 RoHS : Compliant |
| 0 | ||
| 17-300190-10 | Amphenol CONEC | Fiber patch cord; LC duplex; black |
| 0 | ||
| 17-300960 | Amphenol CONEC | Connector: fiber optic; straight |
| 0 | ||
| 1730560005 | Weidmüller Interface GmbH & Co. KG | Markers; Marking: empty; 5.8÷7.8mm; polyamide 66; green; leaded RoHS : Compliant |
| 0 | ||
| 51-730-6740 | Eurostat Group | Polo shirt; black; cotton,polyester,carbon fiber; Size: XXXL; ESD |
| 0 | ||
| 61821730 | Lapp Group | Markers; Marking: W; 3÷4mm; PVC; yellow; push-in; FLEXIMARK®; L: 3mm |
| 0 | ||
| 01730.172000 | Mersen Electrical Power | Fuse holder; D01; for DIN rail mounting; 16A; 400VAC; Poles: 3 |
| 0 | ||
| 117306 | Cimco Integration | Screwdriver: standard; Torx® with protection; TX6 |
| 0 | ||
| 1601730000 | Weidmüller Interface GmbH & Co. KG | Connector: HDC; contact insert; female; HD; PIN: 40; 10A; 250V; glass RoHS : Compliant |
| 0 | ||
| 17-300010 | Amphenol CONEC | Connector: fiber optic; socket; polyester; black; straight |
| 0 | ||
 Ameya Holding Limited | CSD17302Q5A | Texas Instruments | Hong Kong RoHS : Compliant | 67,114 | ||
CSD17305Q5A | Texas Instruments | Hong Kong RoHS : Compliant | 47,919 | |||
| CSD17303Q5 | Texas Instruments | MOSFET N-CH 30V 100A 8SON RoHS : Compliant | 37,542 | |||
| UDZVTE-173.0B | ROHM Semiconductor | 齐纳二极管 RoHS : Compliant |
| 17,540 | ||
| UDZVFHTE-173.0B | ROHM Semiconductor | 齐纳二极管（对应AEC-Q101） RoHS : Compliant |
| 15,000 | ||
| UDZVTE-1730B | ROHM Semiconductor | Zener Diodes RoHS : Compliant |
| 9,000 | ||
| BH1730FVC-TR | ROHM Semiconductor | Digital 16bit Serial Output Type Ambient Light Sensor IC RoHS : Compliant |
| 6,120 | ||
| UDZVFHTE-1730B | ROHM Semiconductor | Zener Diodes (支持 AEC-Q101) RoHS : Compliant |
| 6,000 | ||
| UFZVTE-1730B | ROHM Semiconductor | 齐纳二极管 RoHS : Compliant |
| 5,980 | ||
| UFZVFHTE-1730B | ROHM Semiconductor | 齐纳二极管（AEC-Q101标准） RoHS : Compliant |
| 5,950 | ||
| MAX31730AUB+T | Analog Devices Inc | TRIPLE REMOTE TEMP SENSOR USOP TRL RoHS : Compliant | 858 | |||
| PM8071B1-F3EI DC=>1730 | Microchip Technology Inc | 607 | ||||
| CNY17-3-000E | Broadcom Limited | Optocoupler; THT; Channels: 1; OUT: transistor; Uinsul: 5kV; Uce: 70V RoHS : Compliant | 520 | |||
| RSP-230173-01 | Samtec Inc | 190 | ||||
CSD17308Q3 | Texas Instruments | CSD17308Q3 , N沟道 MOSFET 晶体管, 47 A, Vds=30 V, 8针 SON封装 RoHS : Compliant | 76 | |||
 ComSIT USA | JZ505417306 | STORA ENSO | AVAILABLE EU | 900 | ||
| TLV71730PDQNR | Texas Instruments | AVAILABLE EU RoHS : Compliant | 2,574 | |||
| JZ505417305 | STORA ENSO | AVAILABLE EU | 900 | |||
| JZ505417308 | STORA ENSO | AVAILABLE EU | 2,759 | |||
| JZ505417307 | STORA ENSO | AVAILABLE EU | 3,635 | |||
| JZ505417309 | STORA ENSO | AVAILABLE EU | 3,614 | |||
| 402017300 | CONVER | AVAILABLE EU | 7,931 | |||
ComSIT USA | HCPL81730AE | Avago Technologies | PHOTOTRANSISTOR OPTOCOUPLER HIGH-DENSITY MOUNTING TYPE Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 13,300 | ||
| HCPL81730DE | Avago Technologies | PHOTOTRANSISTOR OPTOCOUPLER HIGH-DENSITY MOUNTING TYPE Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 3,374 | |||
| CNY173060E | Avago Technologies | HIGH COLLECTOR-EMITTER VOLTAGE TYPE PHOTOTRANSISTOR OPTOCOUPLER Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 1,430 | |||
| 5450217300 | Sumida Corporation | Electronic Component RoHS : Compliant | 689 | |||
| AV917301 | ics | Electronic Component RoHS : Not Compliant | 341 | |||
| HCPL817300E | Avago Technologies | PHOTOTRANSISTOR OPTOCOUPLER HIGH-DENSITY MOUNTING TYPE Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 318 | |||
| ZCAT17300730 | TDK Corporation | FERRITE CORE WITH CASE Ferrite Cores/Accessories RoHS : Compliant | 93 | |||
| AV917301CS8LF | ics | Video Genlock PLL, 1.25-75 MHz output; 5 V CMOS SOP-8; WITH phase detector, charge-pump, loop filter and VCO RoHS : Compliant | 60 | |||
 GLYN GmbH & Co. KG | P1730FHF1MA10 | Tianma Micro-electronics Co | TFT 17.30", 1920x1080, IPS, 1200cd, LVDS | 3 | ||
 Interstate Connecting Components | 1730 | Heyco | USR 40 BLACK RoHS : Compliant |
| 66 | |
| KI1730530000G | Amphenol Anytek | KI-3.81-17P GREENRAL6018T GRE | 0 | |||
| 1-2499173-0 | TE Connectivity | QP 6.5 HDR ASSY, 2P, RED, TUBE RoHS : Compliant | 0 | |||
| 1-730225-6 | TE Connectivity | COMBINATION ANVIL | 0 | |||
| 1-730796-3 | TE Connectivity | ANVIL, COMBINATION |
| 0 | ||
| 10-744173-05P | Amphenol Industrial Operations | 0 | ||||
| 10-744173-05P | Amphenol Aerospace | CONN RCPT, SZ 36 W/BUSSED CTCS | 0 | |||
| 154173-0108 MS | ITT Interconnect Solutions | M8351331-C03NN | 0 | |||
| 117303 | Amphenol Lutze | 0 | ||||
| 881173-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC101A213-4/86-0 | 0 | |||
| 217-3026-000 | ITT Interconnect Solutions | 26482 SI HEX NUT SZ 8 CAD |
| 0 | ||
| 217-3031-004 | ITT Interconnect Solutions | 2173031004 | 0 | |||
| 17-300050 | Conec Corporation | RoHS : Compliant |
| 0 | ||
| 155617-3011 | ITT Interconnect Solutions | MKJ1B2T16-55SB | 0 | |||
| CD77173001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC44A1121-20-2/6-9CK0300 RoHS : Compliant | 0 | |||
 NexGen Digital | UDZSTE-1730B | ROHM Semiconductor | RoHS : Compliant | 3,000 | ||
| UFZVFHTE-1730B | ROHM Semiconductor | RoHS : Compliant | 3,000 | |||
| DF17(3.0)-20DS-0.5V(57) | Hirose Electric Co Ltd | RoHS : Compliant | 2,000 | |||
| DR04F36Q1730DYB | 25 | |||||
 PEI Genesis | S2173-0606-2.5-12 | SOURIAU-SUNBANK |
| 0 | ||
| 217-3031-004 | ITT Interconnect Solutions |
| 0 | |||
| 17-300050 | Amphenol Corporation |
| 0 | |||
| C91-730055-05P | Amphenol Corporation |
| 0 | |||
| 217-3027-100 | ITT Interconnect Solutions |
| 0 | |||
| 17-300700 | Amphenol Corporation |
| 0 | |||
| TP1730 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| 11444917-30 | SOURIAU-SUNBANK |
| 0 | |||
| K1730S | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| C91-730056-11P | Amphenol Corporation |
| 0 | |||
| 217-3029-A71 | ITT Interconnect Solutions |
| 0 | |||
| 217-3031-200 | ITT Interconnect Solutions |
| 0 | |||
| 217-3033-200 | ITT Interconnect Solutions |
| 0 | |||
| 17-300230 | Amphenol Corporation |
| 0 | |||
| J1730-34 | SOURIAU-SUNBANK |
| 0 | |||
 Chip 1 Exchange | 06G018173011 | INSTOCK | 34,541 | |||
| 599173-000 | TE Connectivity | INSTOCK RoHS : Not Compliant | 21,710 | |||
| HCPL817300E | INSTOCK | 20,962 | ||||
| 6617302BSS | INSTOCK | 16,593 | ||||
| 88917-301LF | Amphenol Corporation | INSTOCK | 15,600 | |||
| 173083-0008 | Molex | INSTOCK RoHS : Compliant | 9,828 | |||
| 156120M173000 | Wurth Elektronik | INSTOCK RoHS : Compliant | 9,621 | |||
| 30500017300 | INSTOCK | 3,700 | ||||
| 3460173001- | TE Connectivity | INSTOCK | 2,515 | |||
| 10251730 | PTR Messtechnik GmbH & Co KG | INSTOCK | 1,014 | |||
| SXA0617300100K5%AC | INSTOCK | 350 | ||||
| 32173-0 | OSRAM GmbH | INSTOCK | 30 | |||
| AV9173-01CS8 | INSTOCK | 17 | ||||
| 6026B0117301 | INSTOCK | 1 | ||||
| 790-05173-01 | INSTOCK | 1 | ||||
 Avnet Abacus | 173081-4 | TE Connectivity | Conn Wire to Board HDR 4 POS 25mm Solder ST ThruHole (Alt: 173081-4) RoHS : Compliant | 9,000 | ||
| 88917-301LF | Amphenol Corporation | Connector Accessories Receptacle Guide Module Screw Down Version 4Row Liquid Crystal Polymer Natural (Alt: 88917-301LF) RoHS : Compliant | 5,600 | |||
| ZCAT1730-0730A-BK | TDK Corporation | Split Core Ferrite 7 mm 10 MHz 500 MHz 80 Ohm (Alt: ZCAT1730-0730A-BK) RoHS : Compliant | 840 | |||
| 1061730 | Phoenix Contact | Pin Header BoardtoBoard 08 mm 2 Rows 80 Contacts Surface Mount Straight (Alt: 1061730) RoHS : Compliant | 500 | |||
| 22173082 | Molex | (Alt: 22173082) RoHS : Compliant | 0 | |||
| CQ28173001 | TE Connectivity | (Alt: CQ28173001) RoHS : Compliant | 0 | |||
| 1-730796-3 | TE Connectivity | ANVIL COMBINATION (Alt: 1-730796-3) RoHS : Compliant | 0 | |||
| 1-730796-3 | TE Connectivity | ANVIL COMBINATION (Alt: 1-730796-3) RoHS : Compliant | 0 | |||
| EC8173-000 | TE Connectivity | (Alt: EC8173-000) RoHS : Compliant | 0 | |||
| 881173-000 | TE Connectivity | (Alt: 881173-000) RoHS : Compliant | 0 | |||
| 881173-000 | TE Connectivity | (Alt: 881173-000) RoHS : Compliant | 0 | |||
| 1730150000 | Weidmüller Interface GmbH & Co. KG | WDM1730150000 (Alt: 1730150000) RoHS : Compliant | 0 | |||
| 1730851002 | Weidmüller Interface GmbH & Co. KG | WDM1730851002 (Alt: 1730851002) RoHS : Compliant | 0 | |||
| KI1730530000G | Amphenol Corporation | (Alt: KI1730530000G) RoHS : Compliant | 0 | |||
CGA0603MLA-17300E | Bourns Inc | - Tape and Reel (Alt: CGA0603MLA-17300E) RoHS : Compliant | 0 | |||
Avnet Asia | 10173011-A108TLF | Amphenol Corporation | FCI10173011-A108TLF 8PIN MICROSPACEXS SE (Alt: 10173011-A108TLF) RoHS : Compliant |
| 1,365 | |
| 51730-155LF | Amphenol Corporation | (Alt: 51730-155LF) RoHS : Compliant | 0 | |||
| 0173090001 | Molex | (Alt: 0173090001) RoHS : Compliant | 0 | |||
| UDZVTE-1730B | ROHM Semiconductor | Diode Zener Single 29.94V 3% 200mW 2-Pin UMD T/R (Alt: UDZVTE-1730B) RoHS : Compliant | 0 | |||
| 51730-145LF | Amphenol Corporation | (Alt: 51730-145LF) RoHS : Compliant | 0 | |||
| 1730830005 | Molex | (Alt: 1730830005) RoHS : Compliant | 0 | |||
| PH1730AL,115 | Nexperia | (Alt: PH1730AL,115) RoHS : Compliant | 0 | |||
| 6173.0049 | Schurter Electronic Components | (Alt: 6173.0049) RoHS : Compliant | 0 | |||
| 17-300390 | Amphenol Corporation | IP67 INDUSTRIAL DUPLEX LC MM (Alt: 17-300390) RoHS : Compliant | 0 | |||
| UDZSTE-1730B | ROHM Semiconductor | Diode Zener Single 29.94V 3% 200mW 2-Pin UMD T/R (Alt: UDZSTE-1730B) RoHS : Compliant | 0 | |||
| 0022173072 | Molex | PCB Receptacle, 7 Contacts, 1 Row, 2.54mm, Gold, 2.5A, THT, Straight, Brass, Board-to-Board, Solder (Alt: 0022173072) RoHS : Compliant | 0 | |||
| 51730-120LF | Amphenol Corporation | (Alt: 51730-120LF) RoHS : Compliant | 0 | |||
| 17-300310-01 | Amphenol Corporation | (Alt: 17-300310-01) RoHS : Compliant | 0 | |||
| 1511173054 | Molex | Pin Header, 4 Contacts, 2 Rows, 2mm, Tin, 2A, Straight, Shrouded, Copper Alloy, Wire-to-Board, THT (Alt: 1511173054) RoHS : Compliant | 0 | |||
| 1730830004 | Molex | (Alt: 1730830004) RoHS : Compliant | 0 | |||
 Avnet Silica | C17303_HB-2X2-5050-S | LEDIL | Lens Assembly for 25 Spot Beam 2x2 LEDs PMMA Clear (Alt: C17303_HB-2X2-5050-S) RoHS : Compliant | 3,520 | ||
| FOD817300 | onsemi | 4Pin DIP Phototransistor Optocouplers ONSSPCISTNJZ8E4V (Alt: FOD817300) RoHS : Compliant | 0 | |||
| 2SB1730TL | ROHM Semiconductor | Trans GP BJT PNP 12V 2A 3Pin TUMT TR (Alt: 2SB1730TL) RoHS : Compliant | 0 | |||
| SLG59M1730C | Renesas Electronics Corporation | (Alt: SLG59M1730C) RoHS : Compliant | 0 | |||
BUK9M17-30EX | Nexperia | (Alt: BUK9M17-30EX) RoHS : Compliant | 0 | |||
| PXN017-30QLJ | Nexperia | Transistor MOSFET NChannel 30V 12A 8Pin MLPAK33 (Alt: PXN017-30QLJ) RoHS : Compliant | 0 | |||
| UDZSTE-1730B | ROHM Semiconductor | Diode Zener Single 2994V 3 200mW 2Pin UMD TR (Alt: UDZSTE-1730B) RoHS : Compliant | 0 | |||
| UDZSTE-173.0B | ROHM Semiconductor | Diode Zener Single 3V 5 200mW 2Pin UMD Emboss TR (Alt: UDZSTE-173.0B) RoHS : Compliant | 0 | |||
| TC1017-3.0VLTTR | Microchip Technology Inc | LDO Regulator Pos 3V 015A 5Pin SC70 TR (Alt: TC1017-3.0VLTTR) RoHS : Compliant | 0 | |||
TC2117-3.0VEBTR | Microchip Technology Inc | LDO Regulator Pos 3V 08A 4Pin3Tab DDPAK TR (Alt: TC2117-3.0VEBTR) RoHS : Compliant | 0 | |||
| MIC5317-3.0YM5-T5 | Microchip Technology Inc | SINGLE HIGH PERFORMANCE 150MA LDO (Alt: MIC5317-3.0YM5-T5) RoHS : Compliant | 0 | |||
| MIC5317-3.0YM5-TR | Microchip Technology Inc | LDO Regulator Pos 3V 015A 5Pin SOT23 TR (Alt: MIC5317-3.0YM5-TR) RoHS : Compliant | 0 | |||
| MIC5317-3.0YD5-TR | Microchip Technology Inc | LDO Regulator Pos 3V 015A 5Pin TSOT23 TR (Alt: MIC5317-3.0YD5-TR) RoHS : Compliant | 0 | |||
| MIC5317-3.0YMT-TZ | Microchip Technology Inc | LDO Regulator Pos 3V 015A 4Pin DFN TR (Alt: MIC5317-3.0YMT-TZ) RoHS : Compliant | 0 | |||
| CS17307_STRADA-IP-2X6-T2-B-PC | LEDIL | MultiLens 2x6 Position PinScrew Fastening Type 2 Beam (Alt: CS17307_STRADA-IP-2X6-T2-B-PC) RoHS : Compliant | 0 | |||
 Chip-Germany GmbH | 1730172000 | Mersen Electrical Power | 10 | |||
 Component Electronics, Inc | 917309-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 13,000 | |
| 45296173-0 | JMC Products | IN STOCK SHIP TODAY |
| 1,500 | ||
| CSD17302Q5A | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 304 | ||
| 51730-10 | COMM CON | IN STOCK SHIP TODAY | 100 | |||
| 030-9173-006 | ITT Interconnect Solutions | IN STOCK SHIP TODAY RoHS : Compliant |
| 75 | ||
| CSD17308Q3 | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 65 | ||
| 2SC1730 | IN STOCK SHIP TODAY |
| 63 | |||
CSD17301Q5A | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
CSD17304Q3 | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 18 | ||
| 80-4000-3173-0 | 3M | IN STOCK SHIP TODAY |
| 17 | ||
| 22-17-3072 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| 1730434 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| 173173-00 | Dwyer Instruments Inc | IN STOCK SHIP TODAY |
| 9 | ||
| 88917-301 | Amphenol FCi | IN STOCK SHIP TODAY |
| 4 | ||
| DF1730SC | IN STOCK SHIP TODAY |
| 1 | |||
 DB Roberts | 5702-217-30Z3 | Seastrom Mfg |
| 215 | ||
| 1730 | Heyco | USR 40 BLACK RoHS : Compliant | 0 | |||
| 173000600022 | Essentra Components | WASHER M6 | 0 | |||
| D2-519-1730-190 | Southco | This versatile design offers a comprehensive range of low-cost grip-tolerant solutions for high volume production applications. It provides a detent and positive stop for consistent positioning and vibration-resistant performance. Quick-access/quick-rele | 0 | |||
| 1730-632-A | RAF Electronic Hardware | 0 | ||||
| M1317-3005-B-5 | RAF Electronic Hardware | 0 | ||||
| M2117-3005-A | RAF Electronic Hardware | 0 | ||||
| M2117-3005-SS-20 | RAF Electronic Hardware | STANDARD STAINLESS STEEL MALE FEMALE STANDOFF | 0 | |||
| 461730 | Essentra Components | 0 | ||||
| 70017-3-064 | Dodge | M3X0.5 | 0 | |||
| 70017-3-064 | Avdel | DODGE M3X0.5 | 0 | |||
| 2117-3005-A-24 | RAF Electronic Hardware | 0 | ||||
| SPL17300A | Spiralock | 1/4-28 SPL 3 T10 P TIN | 0 | |||
| 34009173001 | Essentra Components | 0 | ||||
| N4-17-301-12 | Southco | 0 | ||||
 EBV Elektronik | HCPL-817-300E | Broadcom Limited | Optocoupler Transistor Output 1 Channel Surface Mount DIP 4 Pins 50 mA 5 kV 50 (Alt: HCPL-817-300E) RoHS : Compliant | 37,400 | ||
| HCPL-817-30CE | Broadcom Limited | Optocoupler Transistor Output 1 Channel SMD 4 Pins 50 mA 5 kV 200 (Alt: HCPL-817-30CE) RoHS : Compliant | 19,200 | |||
| HCPL-817-30DE | Broadcom Limited | Optocoupler 1CH Open CollectorOUT 5000Vrms 4Pin SMD DIP Tube (Alt: HCPL-817-30DE) RoHS : Compliant | 13,500 | |||
| CNY17-3-060E | Broadcom Limited | Optocoupler DCIN 1CH Transistor With Base DCOUT 6Pin PDIP Tube (Alt: CNY17-3-060E) RoHS : Compliant | 13,455 | |||
| CNY17-3-000E | Broadcom Limited | Optocoupler Transistor Output 1 Channel DIP 6 Pins 60 mA 5 kV 100 (Alt: CNY17-3-000E) RoHS : Compliant | 12,285 | |||
| HCPL-817-30BE | Broadcom Limited | Optocoupler 1CH Open CollectorOUT 5000Vrms 4Pin SMD DIP Tube (Alt: HCPL-817-30BE) RoHS : Compliant | 9,300 | |||
| FOD817300W | onsemi | 4Pin DIP Phototransistor Optocouplers ONSSPCISTNJZ8E4V (Alt: FOD817300W) RoHS : Compliant | 0 | |||
| HCPL-817-30LE | Broadcom Limited | Optocoupler DCIN 1CH Transistor DCOUT 4Pin PDIP SMD Tube (Alt: HCPL-817-30LE) RoHS : Compliant | 0 | |||
| HCPL-817-30AE | Broadcom Limited | Optocoupler DCIN 1CH Transistor DCOUT 4Pin PDIP SMD Tube (Alt: HCPL-817-30AE) RoHS : Compliant | 0 | |||
| MIC5317-3.0YM5-T5 | Microchip Technology Inc | SINGLE HIGH PERFORMANCE 150MA LDO (Alt: MIC5317-3.0YM5-T5) RoHS : Compliant | 0 | |||
| MIC5317-3.0YM5-TR | Microchip Technology Inc | LDO Regulator Pos 3V 015A 5Pin SOT23 TR (Alt: MIC5317-3.0YM5-TR) RoHS : Compliant | 0 | |||
| C17303_HB-2X2-5050-S | LEDIL | Lens Assembly for 25 Spot Beam 2x2 LEDs PMMA Clear (Alt: C17303_HB-2X2-5050-S) RoHS : Compliant | 0 | |||
| FH8065301730502-SR3V8 | Intel Corporation | MPU CELERON N CISC 64Bit 1580MHz 1170Pin FCBGA Tray (Alt: 962777) RoHS : Compliant | 0 | |||
| FH8065301730502S R1W5 | Intel Corporation | MPU Celeron 64Bit 1580MHz 1170Pin FCBGA Tray (Alt: 934898) RoHS : Compliant | 0 | |||
| CS17307_STRADA-IP-2X6-T2-B-PC | LEDIL | MultiLens 2x6 Position PinScrew Fastening Type 2 Beam (Alt: CS17307_STRADA-IP-2X6-T2-B-PC) RoHS : Compliant | 0 | |||
 ECCO | 217-3027-000-MS | ITT Interconnect Solutions |
| 596 | ||
| 217-3029-000-MS | ITT Interconnect Solutions |
| 497 | |||
| 217-3028-000-MS | ITT Interconnect Solutions |
| 250 | |||
| 217-3026-000-MS | ITT Interconnect Solutions |
| 249 | |||
| 217-3031-000 | ITT Interconnect Solutions |
| 162 | |||
| 217-3029-000 | ITT Interconnect Solutions |
| 103 | |||
| 2173029000 | ITT Interconnect Solutions |
| 103 | |||
| 2173032000 | ITT Interconnect Solutions |
| 59 | |||
| 217-3032-000 | ITT Interconnect Solutions |
| 59 | |||
| 217-3033-000 | ITT Interconnect Solutions |
| 40 | |||
| 2173033000 | ITT Interconnect Solutions |
| 40 | |||
| 2173034000 | ITT Interconnect Solutions |
| 20 | |||
| 217-3034-000 | ITT Interconnect Solutions |
| 20 | |||
| 217-3026-000 | ITT Interconnect Solutions |
| 1 | |||
| 2173028000 | ITT Interconnect Solutions |
| 1 | |||
 Flip Electronics | FOD817300 | onsemi | Stock, Ship Today RoHS : Compliant |
| 13,870 | |
| FOD817300W | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,600 | ||
 Master Electronics | 1730 | JKL Components Corporation | T-1 3/4 Wire Lead Lamp RoHS : Compliant |
| 30 | |
| 1730 | Woodhead Molex | Conn Power RCP 2Power/1Ground POS ST Cable Mount 3 Terminal 1 Port Safeway® RoHS : Compliant |
| 0 | ||
| CLE-173-01-G-DV-K-TR | Samtec Inc | 0.80 mm Tiger Beam™ Cost-effective Single Beam Socket Strip RoHS : Compliant |
| 0 | ||
| MTMM-125-04-FM-D-173-036 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MW-04-03-G-D-173-080-FR | Samtec Inc | 1.00 MM FLEX STACK RoHS : Compliant |
| 0 | ||
| MMSD-17-30C-L-03.25-D-P-MU | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSDT-17-30-S-03.25-D-P-LD | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FJ-10-D-17.30-4 | Samtec Inc | 1.00 mm Flat Flex Cable RoHS : Compliant |
| 0 | ||
| FFSD-04-S-01.73-01 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FFSD-13-D-01.73-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSW-117-30-F-S | Samtec Inc | Conn Unshrouded Header HDR 17 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| HTSW-117-30-LM-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-117-30-S-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FTE-173-01-G-DV-ES-A-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-02-G-D-173-078 | Samtec Inc | .050'' BOARD SPACERS RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3W17306 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm. Fire Rated N Male Right Angle to N Male Right Angle Low Loss Cable Using LMR-240-FR Coax with Times Microwave Components., Radio frequency assembly fire rated N male right angle to N male right angle low loss cable using LMR-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male right angle to N male right angle low loss cable using LMR-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17306 can also be known as a low loss right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17306 RF cable has a FRPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W17306 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 2,000 | ||
| PE3W17303-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated N Male to SMA Male Low Loss Cable 48 Inch Length Using LMR-240-FR Coax., Radio frequency assembly fire rated N male to SMA male low loss cable 48 inch length using LMR-240-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to SMA male low loss cable 48 inch length using LMR-240-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W17303-48 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17303-48 RF cable has a FRPE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3W17303-48 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17303-48 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,108 | ||
| PE3W17306-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated N Male Right Angle to N Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240-FR Coax with Times Microwave Components., Radio frequency assembly fire rated N male right angle to N male right angle low loss cable 12 inch length using LMR-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male right angle to N male right angle low loss cable 12 inch length using LMR-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17306-12 can also be known as a low loss right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17306-12 RF cable has a FRPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W17306-12 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 400 | ||
| PE3W17306-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated N Male Right Angle to N Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240-FR Coax with Times Microwave Components., Radio frequency assembly fire rated N male right angle to N male right angle low loss cable 60 inch length using LMR-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male right angle to N male right angle low loss cable 60 inch length using LMR-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17306-60 can also be known as a low loss right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17306-60 RF cable has a FRPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W17306-60 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 400 | ||
| PE3W17306-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Fire Rated N Male Right Angle to N Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240-FR Coax with Times Microwave Components., Radio frequency assembly fire rated N male right angle to N male right angle low loss cable 36 inch length using LMR-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male right angle to N male right angle low loss cable 36 inch length using LMR-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17306-36 can also be known as a low loss right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17306-36 RF cable has a FRPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W17306-36 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 400 | ||
| PE51730 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 18 GHz, Interface Type 1: .026 inch End Launch. SMA Female Commercial Grade Connector Solder Attachment .026 inch End Launch PCB, .020 Inches Diameter Pin. PE51730 SMA female PCB connector has an interface type of SMA female which is compatible with .026 inch end launch cables and has an impedance of 50 Ohms. Pasternack's SMA female connector uses solder as an attachment method. Our female SMA PCB connector provides a maximum frequency of 18 GHz. Our high-quality radio frequency co-axial connector is used for general purpose test and printed circuit board applications. This SMA female RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack SMA female PCB connector has a PTFE dielectric type and a VSWR of 1.2:1. Pasternack's SMA PCB connector has a brass body with gold plating. Our PE51730 SMA connector uses a gold-plated beryllium copper contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. The PE51730 SMA commercial grade connector operates at a temperature range of -55 to 125 deg C. This female SMA PCB RF connector has a maximum insertion loss of 0.3 dB. This SMA connector has a gold inner contact plating. The Pasternack commercial grade SMA female connector has a dielectric withstanding voltage of 1,000 Vrms. This PCB RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our SMA female connector has a length of 0.52 inches, a width of 0.32 inches, and a weight of 0.05 lbs. This Pasternack commercial grade female SMA connector will ship the same business day as purchased. Our SMA female connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements. |
| 49 | ||
| PE7317-30 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.6:1, Attenuation: 30 dB, Connector Series 1: N, Connector Gender 1: Female, Connector Series 2: N, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, N Female To N Male Directional Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 18 GHz. PE7317-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a female gender on side 1 and a type N male connector on side 2. The Pasternack PE7317-30 30 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7317-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 31 | ||
| PE3FCA417-30M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to LC UPC, OM4 Multimode Distribution Cable, 6.2mm LSZH, 2.0mm breakout, Aqua-30M. Pasternack’s PE3FCA417-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 12-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA417-30M fiber optic cable with a 6.2 mm cable diameter and 47 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 28 | ||
| PE7017-30 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 25 Watt, VSWR Maximum: 1.4:1, Attenuation: 30 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, N Male to N Female Black Anodized Aluminum Heatsink Body Rated to 25 Watts Up to 18 GHz. PE7017-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7017-30 30 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 25 Watts at the stated attenuation value. Our fixed RF attenuator PE7017-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 6 | ||
| PE3W17305LF | Pasternack Enterprises | 0 | ||||
| PE3W17308-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated N Male to 4.3-10 Male Low Loss Cable 48 Inch Length Using LMR-240-FR Coax., Radio frequency assembly fire rated N male to 4.3-10 male low loss cable 48 inch length using LMR-240-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to 4.3-10 male low loss cable 48 inch length using LMR-240-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a 4.3-10 cable connection on the other. Our low loss type N to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W17308-48 can also be known as a low loss type N plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17308-48 RF cable has a FRPE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our type N male to 4.3-10 male cable has a maximum VSWR of 1.4:1. Type N plug to 4.3-10 plug cable assembly PE3W17308-48 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17308-48 can also be used in the other direction and will be a 4.3-10 male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 4.3-10 cable assembly for quick shipment worldwide. Variations of type N and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 4.3-10 low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W17301 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. QMA Male to BNC Male Cable Using PE-P195 Coax. PE3W17301 is a QMA male to BNC male cable using PE-P195 coax. This Pasternack QMA male to BNC male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm BNC for connector 2. Our male QMA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17301 QMA male to BNC male cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3W11730 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. Limited Detent SMP Male 2 Hole Flange to 2.4mm Male Cable Using PE-SR405FLJ Coax. PE3W11730 is a SMP male 2 hole flange to 2.4mm male cable using PE-SR405FLJ coax. This Pasternack SMP male 2 hole flange to 2.4mm male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm 2.4mm for connector 2. Our male SMP 2 hole flange to male 2.4mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W11730 SMP male 2 hole flange to 2.4mm male cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3W17300 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. Mini UHF Male to N Female Cable Using LMR-100-FR Coax. PE3W17300 is a Mini UHF male to N female cable using LMR-100A-FR coax. This Pasternack Mini UHF male to N female cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm N for connector 2. Our male Mini UHF to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17300 Mini UHF male to N female cable assembly is constructed with LMR-100A-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W17304 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm. N Female to 4.3-10 Male Cable Using LMR-240-FR Coax. PE3W17304 is a N female to 4.3-10 male cable using LMR-240-FR coax. This Pasternack N female to 4.3-10 male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our female N to male 4.3-10 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17304 N female to 4.3-10 male cable assembly is constructed with LMR-240-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
 Vyrian | LTC1730EGN-4-TRPBF | Analog Devices Inc | 12,242 | |||
| LTC1730EGN-4 | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, CMOS, PDSO16 RoHS : Not Compliant | 11,146 | |||
| LTC1730ES8-4.2#TRPBF | Analog Devices Inc | Battery Charge Controller, PDSO8 RoHS : Compliant | 9,624 | |||
| LTC1730ES8-4.2#PBF | Analog Devices Inc | Battery Charge Controller, PDSO8 RoHS : Compliant | 7,825 | |||
| LTC1730EGN-4-PBF | Analog Devices Inc | 7,456 | ||||
| LTC1730ES8-4.2#TR | Analog Devices Inc | Battery Charge Controller, PDSO8 RoHS : Not Compliant | 7,440 | |||
M28LV17-300K6 | STMicroelectronics | RoHS : Not Compliant | 6,701 | |||
| LTC1730ES8-4-2-TRPBF | Analog Devices Inc | 6,616 | ||||
| LTC1730EGN-4#TR | Analog Devices Inc | Battery Charge Controller, PDSO16 RoHS : Not Compliant | 6,093 | |||
| LTC1730EGN-4#TRPBF | Analog Devices Inc | Battery Charge Controller, PDSO16 RoHS : Compliant | 6,011 | |||
| LTC1730EGN-4#PBF | Analog Devices Inc | Battery Charge Controller, PDSO16 RoHS : Compliant | 5,823 | |||
| LTC1730ES8-4.2 | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, CMOS, PDSO8 RoHS : Not Compliant | 5,282 | |||
| LTC1730ES8-4-2-PBF | Analog Devices Inc | 5,051 | ||||
| M28LV17-300K1T | STMicroelectronics | 4,144 | ||||
| M28LV17-300K1 | STMicroelectronics | RoHS : Not Compliant | 3,051 | |||
 Waytek, Inc. | 817-3000 | Xantrex Technology Inc | Xantrex Freedom X 3000 Inverter |
| 4 | |
 Win Source Electronics | 917309-1 | TE Connectivity | CONN MINI MLC TAB CONT RoHS : Compliant |
| 180,000 | |
| CSD17308Q3 | Texas Instruments | MOSFET N-CH 30V 47A 8SON RoHS : Compliant |
| 52,500 | ||
| CSD17308Q3T | Texas Instruments | MOSFET N-CH 30V 50A / Trans MOSFET N-CH 30V 50A 8-Pin VSON-CLIP EP T/R RoHS : Compliant |
| 47,940 | ||
TPS71730DCKRG4 | Texas Instruments | Low Noise, High-Bandwidth PSRR Low-Dropout 150mA Linear Regulator | IC REG LINEAR 3V 150MA SC70-5 RoHS : Compliant |
| 39,005 | ||
| TPS71730DCKT | Texas Instruments | IC REG LDO 3V 0.15A SC70-5 RoHS : Compliant |
| 39,000 | ||
| TPS71730DCKR | Texas Instruments | IC REG LDO 3V 0.15A SC70-5 RoHS : Compliant |
| 36,000 | ||
CSD17309Q3 | Texas Instruments | MOSFET N-CH 30V 60A 8SON / Trans MOSFET N-CH 30V 20A 8-Pin VSON-CLIP EP T/R RoHS : Compliant |
| 31,000 | ||
| BH1730FVC-TR | ROHM Semiconductor | Digital 16bit Serial Output Type Ambient Light Sensor IC RoHS : Compliant |
| 16,330 | ||
CSD17306Q5A | Texas Instruments | MOSFET N-CH 30V 100A 8SON / Trans MOSFET N-CH 30V 24A 8-Pin VSONP EP T/R RoHS : Compliant |
| 10,000 | ||
| CSD17304Q3 | Texas Instruments | MOSFET N-CH 30V 56A 8SON RoHS : Compliant |
| 10,000 | ||
| HCPL-817-300E | Broadcom Limited | OPTOISOLATOR 5KV TRANSISTOR 4SMD RoHS : Compliant |
| 6,700 | ||
CSD17307Q5A | Texas Instruments | MOSFET N-CH 30V 73A 8SON RoHS : Compliant |
| 5,000 | ||
| ISD1730SY | Nuvoton Technology Corp | Multi-Message Single-Chip Voice Record & Playback Devices | IC VOICE REC/PLAY 30SEC 28-SOIC RoHS : Compliant |
| 1,000 | ||
 Wuhan P&S | 51730-232LF | Amphenol FCi | PwrBlade:4R28P,2.54mm,T/H,R/A,STB HDR |
| 924 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand