Electronic Components Datasheet Search
  English  ▼

X  



128LP-7SL Distributor

DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

Pasternack Enterprises US
PE3W01288

Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. N Male to N Female Bulkhead Low Loss Cable Using LMR-240 Coax., Radio frequency assembly N male to N female bulkhead low loss cable using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female bulkhead low loss cable using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and female on end 2. PE3W01288 can also be known as a low loss type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3W01288 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01288 can also be used in the other direction and will be N type female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead low loss cable using LMR-240 coax.
1,200
PE3C1128/GR/HS

Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm. N Male to SMA Female Cable Using PE-P142LL Coax with HeatShrink., Pasternack’s PE3C1128/GR/HS type N male to SMA female RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and an SMA cable connection on the other. Our type N to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3C1128/GR/HS can also be known as a type N plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1128/GR/HS RF cable has an FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our type N male to SMA female cable has a maximum VSWR of 1.322:1. This PE3C1128/GR/HS type N plug to SMA jack cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a clamp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C1128/GR/HS can also be used in the other direction and will be an SMA female to type N male cable assembly if the opposite connectivity is required. This type N plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA RF cable assembly as per your requirements.
0
PE3M0128/SP1

Pasternack Enterprises
0
PE3W12808-48

Pasternack Enterprises Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SSMA Female Bulkhead to Push-On SMP Female Right Angle Low Loss Cable 48 Inch Length Using LMR-100 Coax., Radio frequency assembly SSMA female bulkhead to push-on SMP female right angle low loss cable 48 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMA female bulkhead to push-on SMP female right angle low loss cable 48 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SSMA bulkhead cable connection on one end and a right angle SMP cable connection on the other. Our low loss SSMA to right angle SMP cable assembly has a female gender on end 1 and a female on end 2. PE3W12808-48 can also be known as a low loss SSMA jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12808-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SSMA jack to SMP jack cable assembly PE3W12808-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12808-48 can also be used in the other direction and will be a right angle SMP female to SSMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SSMA jack bulkhead to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to SMP cable assembly for quick shipment worldwide. Variations of SSMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to SMP low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03
0
PE3W12823

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Male to Smooth Bore SMP Male Bulkhead Cable Using RG405 Coax. PE3W12823 is a SMA male to SMP male bulkhead cable using RG405 coax. This Pasternack SMA male to SMP male bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. Our male SMA to male SMP bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W12823 SMA male to SMP male bulkhead cable assembly is constructed with RG405 coax.
0
PE3W21283

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. N Male Right Angle to Reverse Polarity TNC Male Cable Using LMR-240 Coax. PE3W21283 is a N male right angle to reverse polarity TNC male cable using LMR-240 coax. This Pasternack N male right angle to reverse polarity TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. N right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21283 N male right angle to TNC reverse polarity male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W12800LF

Pasternack Enterprises Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 2.2-5 Male to QMA Male Cable Using TFT-5G-402 Coax, LF Solder. PE3W12800LF is a 2.2-5 male to QMA male cable using TFT-5G-402 coax. This Pasternack 2.2-5 male to QMA male cable assembly uses a 50 Ohm 2.2-5 for connector 1 and a 50 Ohm QMA for connector 2. Our male 2.2-5 to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12800LF 2.2-5 male to QMA male cable assembly is constructed with TFT-5G-402 coax.
0
PE3W12822

Pasternack Enterprises Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. BNC Male to QMA Female Bulkhead Cable Using LMR-100A-UF Coax. PE3W12822 is a BNC male to QMA female bulkhead cable using LMR-100A-UF coax. This Pasternack BNC male to QMA female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm QMA for connector 2. Our male BNC to female QMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12822 BNC male to QMA female bulkhead cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W12885-60

Pasternack Enterprises Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to SMA Male Low Loss Cable 60 Inch Length Using LMR-195-UF Coax., Radio frequency assembly TNC male to SMA male low loss cable 60 inch length using LMR-195-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to SMA male low loss cable 60 inch length using LMR-195-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a SMA cable connection on the other. Our low loss TNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W12885-60 can also be known as a low loss TNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12885-60 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our TNC male to SMA male cable has a maximum VSWR of 1.5:1. TNC plug to SMA plug cable assembly PE3W12885-60 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12885-60 can also be used in the other direction and will be a SMA male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $69.59
10 : $68.2
25 : $66.81
100 : $65.41
0
PE3W21282

Pasternack Enterprises Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. 1.0/2.3 Male Right Angle to SMA Male Cable Using LMR-195-FR Coax. PE3W21282 is a 1.0/2.3 male right angle to SMA male cable using LMR-195-FR coax. This Pasternack 1.0/2.3 male right angle to SMA male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm SMA for connector 2. 1.0/2.3 right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 1.0/2.3 right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21282 1.0/2.3 male right angle to SMA male cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3FCA128-1M

Pasternack Enterprises Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex SC UPC to ST UPC, SM OS2, 2.0mm LSZH, Yellow-1M. Pasternack’s PE3FCA128-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long patch cable assembly is equipped with simplex SC/UPC to ST/UPC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA128-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/UPC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.
1 : $22.89
5 : $21.97
10 : $21.06
25 : $20.14
0
PE3C0128/HS

Pasternack Enterprises Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to N Female Bulkhead Cable Using LMR-240 Coax with HeatShrink. PE3C0128/HS is a reverse polarity TNC male to N female bulkhead cable using LMR-240 coax. This Pasternack reverse polarity TNC male to N female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity male TNC to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0128/HS TNC reverse polarity male to N female bulkhead cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3C11287

Pasternack Enterprises
0
PE3C1284

Pasternack Enterprises
0
PE3W01288LF/HS

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. N Male to N Female Bulkhead Cable Using LMR-240 Coax with HeatShrink, LF Solder, RoHS. PE3W01288LF/HS is a N male to N female bulkhead cable using LMR-240 coax. This Pasternack N male to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01288LF/HS N male to N female bulkhead cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.
0

Vyrian
XCR3128-10TQ128C

AMD Xilinx EE PLD, 10ns, 128-Cell, CMOS, PQFP128
RoHS : Not Compliant
3,520
XCR5128-15TQ128I

AMD Xilinx EE PLD, 17.5ns, 128-Cell, CMOS, PQFP128
RoHS : Not Compliant
3,426
XCR5128-12TQ128C

AMD Xilinx EE PLD, 14.5ns, 128-Cell, CMOS, PQFP128
RoHS : Not Compliant
3,324
XCR3128-15TQ128C

AMD Xilinx EE PLD, 15ns, 128-Cell, CMOS, PQFP128
RoHS : Not Compliant
2,958
XCR3128-12TQ128C

AMD Xilinx EE PLD, 12ns, 128-Cell, CMOS, PQFP128
RoHS : Not Compliant
2,828
XCR5128-10TQ128C

AMD Xilinx EE PLD, 12ns, 128-Cell, CMOS, PQFP128
RoHS : Not Compliant
2,666
XCR3128A-10TQ128C

AMD Xilinx EE PLD, 10ns, 128-Cell, CMOS, PQFP128
RoHS : Not Compliant
2,087
XCR3128A-15TQ128I

AMD Xilinx EE PLD, 15ns, 128-Cell, CMOS, PQFP128
RoHS : Not Compliant
2,029
XCR5128-10TQ128I

AMD Xilinx EE PLD, 12ns, 128-Cell, CMOS, PQFP128
RoHS : Not Compliant
1,994
XCR3128A-10TQ128I

AMD Xilinx EE PLD, 10ns, 128-Cell, CMOS, PQFP128
RoHS : Not Compliant
1,980
XCR3128A-12TQ128C

AMD Xilinx EE PLD, 12ns, 128-Cell, CMOS, PQFP128
RoHS : Not Compliant
1,974
XCR3128A-7TQ128C

AMD Xilinx EE PLD, 7.5ns, 128-Cell, CMOS, PQFP128
RoHS : Not Compliant
1,838
XCR3128-12TQ128I

AMD Xilinx EE PLD, 12ns, 128-Cell, CMOS, PQFP128
RoHS : Not Compliant
1,608
XCR3128-15TQ128I

AMD Xilinx EE PLD, 15ns, 128-Cell, CMOS, PQFP128
RoHS : Not Compliant
1,551
XCR5128-7TQ128C

AMD Xilinx EE PLD, 9.5ns, 128-Cell, CMOS, PQFP128
RoHS : Not Compliant
1,357

Waytek, Inc.
19128-0023

Molex 16-14 GA #8 Spade Terminal Non-Insulated
100 : $0.1067
200 : $0.0979
500 : $0.0908
1,000 : $0.0868
5,000 : $0.0839
18,768
19128-0021

Molex 16-14 GA #6 Spade Terminal Non-Insulated
100 : $0.1082
200 : $0.0984
500 : $0.0879
1,000 : $0.0795
5,000 : $0.0759
15,722
T120S0K2 111-12803

HellermannTyton HellermannTyton T120S0K2 heavy-duty cable tie is a high-strength self-locking nylon tie with a 9" length for securing larger wire bundles, hoses, and tubing. Its one-piece heavy-duty design supports dependable hold and cleaner harness routing in demanding applications.
50 : $0.2406
200 : $0.2287
500 : $0.2127
1,000 : $0.2037
15,550
15355128

Aptiv PLC Aptiv 15355128 is a 2-contact TPA secondary lock clip for GT 150 Series connectors. The terminal position assurance component provides secondary retention for 2 circuits, helping keep installed terminals aligned and firmly seated in the compatible connector housing.
RoHS : Compliant
100 : $0.1279
200 : $0.1181
500 : $0.1054
1,000 : $0.0918
5,000 : $0.0876
14,219
19193-0128

Molex 12-10 GA #6 RING TERMINAL NON-INSULATED BRAZED
RoHS : Compliant
50 : $0.1524
200 : $0.1444
500 : $0.1344
1,000 : $0.1291
12,613
128265-91W

General Cable Technologies Corporation 16GA SXL Green Cross-Link Automotive Wire XLPE -51C to 125C
500 : $0.1741
1,000 : $0.1481
2,000 : $0.1213
5,000 : $0.1109
9,000
19128-0055

Molex 16-14 GA #10 Spade Terminal Non-Insulated
100 : $0.1006
200 : $0.0913
500 : $0.0816
1,000 : $0.0738
5,000 : $0.0704
7,109
8911289

Aptiv PLC Aptiv 8911289 outlet fitting for corrugated loom is a conduit transition component designed to route protected wiring out of split loom. Its formed outlet design helps guide and secure harness exits while maintaining organized cable protection in vehicle and equipment applications.
20 : $2.6319
50 : $2.3461
100 : $2.1292
200 : $2.0601
500 : $1.9911
1,000 : $1.9123
2,637
C1131/28 S3020

APM HEXSEAL APM Hexseal C1131/28 S3020 full toggle boot is a glow-in-the-dark protective boot for toggle switches. It features a molded-in mounting nut and panel-sealing rib that eliminates the need for an O-ring, helping protect switch openings from environmental exposure.
1 : $2.7996
50 : $2.3442
100 : $2.033
200 : $1.9108
500 : $1.833
884
C1131/28 S3006

APM HEXSEAL Full Toggle Boot, Color Red
1 : $2.7996
50 : $2.3442
100 : $2.033
200 : $1.9108
500 : $1.833
358
C1131/28-4

APM HEXSEAL APM Hexseal C1131/28-4 full toggle boot protects toggle switch assemblies from weather and salt spray. Designed for 15/32" diameter mounting stems, this full boot style covers standard-length handles and uses silicone rubber sealing for panel-mounted switches.
1 : $2.5296
50 : $2.1098
100 : $1.8398
200 : $1.7198
500 : $1.6497
229
12-812 EP

Pollak The Pollak 12-812EP is an ISO 7-way trailer connector socket designed for reliable vehicle-to-trailer electrical connections in heavy-duty and commercial applications. Rated for 624V and up to 40A, it features seven round-pin terminals conforming to SAE J560 standards. Constructed with durable materials and sealed rear terminals, it provides secure connectivity and resistance to moisture, dirt, and vibration in harsh environments.
1 : $16.27
10 : $13.85
50 : $12.64
100 : $12.19
200 : $11.81
500 : $11.5
34
4300-3128

Pressmaster AB DIE SET FOR 26-22/12-10 GA INS FOR 560 CRIMPER
1 : $47.16
10 : $44.62
13

Win Source Electronics
INA128UA

Texas Instruments INST Amp Single ±18V 8-Pin SOIC Tube / IC OPAMP INSTR 1.3MHZ 8SOIC
RoHS : Compliant
200 : $1.5023
160 : $1.5634
124 : $1.6245
86 : $1.7466
56 : $1.8077
26 : $1.9298
60,000
INA128UA/2K5G4

Texas Instruments IC OPAMP INSTR 1.3MHZ 8SOIC
RoHS : Compliant
200 : $1.5023
160 : $1.5634
124 : $1.6245
86 : $1.7466
56 : $1.8077
26 : $1.9298
57,560
INA128UA/2K5

Texas Instruments INST Amp Single ±18V 8-Pin SOIC T/R / IC OPAMP INSTR 1.3MHZ 8SOIC
RoHS : Compliant
200 : $1.5023
160 : $1.5634
124 : $1.6245
86 : $1.7466
56 : $1.8077
26 : $1.9298
56,960
INA128UAG4

Texas Instruments Precision, Low Power INSTRUMENTATION AMPLIFIERS | IC INST AMP 1 CIRCUIT 8SOIC
RoHS : Compliant
200 : $1.5023
160 : $1.5634
124 : $1.6245
86 : $1.7466
56 : $1.8077
26 : $1.9298
54,430
INA128UA/INA128U

Texas Instruments
250 : $1.2165
185 : $1.3569
145 : $1.4037
105 : $1.4505
70 : $1.4973
30 : $1.8248
38,310
IS25LP128F-JBLA3

Integrated Silicon Solution Inc IC FLASH 128MBIT SPI/QUAD 8SOIC
RoHS : Compliant
101 : $2.9771
76 : $3.3207
59 : $3.4352
43 : $3.5497
28 : $3.6642
12 : $4.4657
5,800
IS25LP128F-JBLA3-TR

Integrated Silicon Solution Inc 128Mb QPI/QSPI, 8-pin SOP 208Mil
RoHS : Compliant
101 : $2.9771
76 : $3.3207
59 : $3.4352
43 : $3.5497
28 : $3.6642
12 : $4.4657
5,460
ATXMEGA128A3U-AU

Atmel Corporation MCU 8-bit/16-bit AVR RISC 128KB Flash 1.8V/2.5V/3.3V 64-Pin TQFP Tray / IC MCU 8BIT 128KB FLASH 64TQFP
RoHS : Compliant
16 : $19.8474
12 : $22.1375
9 : $22.9008
7 : $23.6642
5 : $24.4275
2 : $29.771
5,446
ATMEGA128-16AU

Atmel Corporation IC MCU 8BIT 128KB FLASH 64TQFP
RoHS : Compliant
32 : $9.3894
26 : $9.771
20 : $10.1527
14 : $10.9161
9 : $11.2978
5 : $12.0611
5,000
MT47H128M8SH-25E IT:M

Micron Technology Inc IC SDRAM 1GBIT 400MHZ 60FBGA / DRAM Chip DDR2 SDRAM 1Gbit 128Mx8 1.8V 60-Pin FBGA
20 : $15.023
16 : $15.6336
13 : $16.2443
9 : $17.4657
6 : $18.0764
3 : $19.2978
5,000
ATMEGA128-16AUR

Atmel Corporation IC MCU 8BIT 128KB FLASH 64TQFP / AVR AVR® ATmega Microcontroller IC 8-Bit 16MHz 128KB (64K x 16) FLASH 64-TQFP (14x14)
RoHS : Compliant
32 : $9.3894
26 : $9.771
20 : $10.1527
14 : $10.9161
9 : $11.2978
5 : $12.0611
4,610
MT47H128M8SH-25E IT:M TR

Micron Technology Inc IC DRAM 1GBIT PARALLEL 60FBGA
20 : $15.023
16 : $15.6336
13 : $16.2443
9 : $17.4657
6 : $18.0764
3 : $19.2978
4,510
TB67S128FTG(O,EL)

Toshiba America Electronic Components IC MTR DRVR BIPOLAR 0-5.5V 64QFN / Bipolar Motor Driver Power MOSFET Parallel 64-VQFN (9x9)
RoHS : Compliant
89 : $3.3986
66 : $3.7907
52 : $3.9214
38 : $4.0522
24 : $4.1829
10 : $5.0979
3,959
ADUCM360BCPZ128-R7

Analog Devices Inc MCU 32-bit ARM Cortex M3 RISC 128KB Flash 2.5V/3.3V 48-Pin LFCSP EP T/R / IC MCU 32BIT 128KB FLASH 48LFCSP
RoHS : Compliant
22 : $14.077
16 : $15.7013
13 : $16.2427
9 : $16.7841
6 : $17.3256
3 : $21.1155
3,000
ATXMEGA128A3U-AUR

Microchip Technology Inc IC MCU 8/16BIT 128KB FLSH 64TQFP / AVR AVR® XMEGA® A3U Microcontroller IC 8/16-Bit 32MHz 128KB (64K x 16) FLASH 64-TQFP (14x14)
RoHS : Compliant
16 : $19.8474
12 : $22.1375
9 : $22.9008
7 : $23.6642
5 : $24.4275
2 : $29.771
2,000

Wuhan P&S
WSL25128L000FEA18

Vishay Intertechnologies WSL-2512-18 .008 1% EA E3
RoHS : Compliant
1 : $5.88
100 : $1.96
500 : $1.82
1,000 : $1.77
16,000
CAV25128VE-GT3

onsemi 128-Kbit SPI Serial CMOS EEPROM
RoHS : Compliant
1 : $1.04
100 : $0.67
500 : $0.55
1,000 : $0.51
2,400

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com