1244GA Price, Distributor, Stock

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to TNC Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240 Coax., Radio frequency assembly SMA male to TNC male right angle low loss cable 48 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male right angle low loss cable 48 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C3124-48 can also be known as a low loss SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C3124-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3124-48 can also be used in the other direction and will be right angle TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male right angle low loss cable 48 inch length using LMR-240 coax.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

3,349

PE3W12441

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. N Female Bulkhead to SMP Female Cable Using RG178 Coax., Radio frequency assembly N female bulkhead to SMP female cable using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to SMP female cable using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a SMP cable connection on the other. Our type N to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3W12441 can also be known as a type N jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12441 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has a between series connection. Type N jack to SMP jack cable assembly PE3W12441 is built with RG178 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the solder/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W12441 can also be used in the other direction and will be a SMP female to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMP cable assembly for quick shipment worldwide. Variations of type N and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMP RF cable assembly as per your requirements.

380

PE3W12441-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. N Female Bulkhead to SMP Female Cable 6 Inch Length Using RG178 Coax., Radio frequency assembly N female bulkhead to SMP female cable 6 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to SMP female cable 6 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a SMP cable connection on the other. Our type N to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3W12441-6 can also be known as a type N jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12441-6 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has a between series connection. Type N jack to SMP jack cable assembly PE3W12441-6 is built with RG178 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the solder/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W12441-6 can also be used in the other direction and will be a SMP female to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMP cable assembly for quick shipment worldwide. Variations of type N and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMP RF cable assembly as per your requirements.

1 : $151.99
25 : $144.39
50 : $136.79
100 : $130.71

PE3W12441-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. N Female Bulkhead to SMP Female Cable 9 Inch Length Using RG178 Coax., Radio frequency assembly N female bulkhead to SMP female cable 9 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to SMP female cable 9 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a SMP cable connection on the other. Our type N to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3W12441-9 can also be known as a type N jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12441-9 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has a between series connection. Type N jack to SMP jack cable assembly PE3W12441-9 is built with RG178 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the solder/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W12441-9 can also be used in the other direction and will be a SMP female to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMP cable assembly for quick shipment worldwide. Variations of type N and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMP RF cable assembly as per your requirements.

1 : $154.99
25 : $147.24
50 : $139.49
100 : $133.29

PE3C1244LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Female to N Female Cable Using LMR-400 Coax, LF Solder, RoHS. PE3C1244LF is a N female to N female cable using LMR-400 coax. This Pasternack N female to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1244LF N female to N female cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W12445

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using Tinned RG402 Coax. PE3W12445 is a BNC male to BNC male cable using RG402 Tinned coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W12445 BNC male to BNC male cable assembly is constructed with RG402 Tinned coax.

PE3W12447

Pasternack Enterprises

Key Specifications, Connector Series 1: NMO Mount, Connector Gender 1: Sexless, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. NMO Mount Sexless to BNC Male Cable Using RG400 Coax. PE3W12447 is a NMO Mount sexless to BNC male cable using RG400 coax. This Pasternack NMO Mount sexless to BNC male cable assembly uses a 50 Ohm NMO Mount for connector 1 and a 50 Ohm BNC for connector 2. Our sexless NMO Mount to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12447 NMO Mount sexless to BNC male cable assembly is constructed with RG400 coax.

PE3W12448

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm. N Female to N Male Cable Using RG8 Coax. PE3W12448 is a N female to N male cable using RG8 coax. This Pasternack N female to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12448 N female to N male cable assembly is constructed with RG8 coax.

PE3W12449

Pasternack Enterprises

Key Specifications, Connector Series 1: D-Subminiature, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: D-Subminiature, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. D-Sub Plug Right Angle to D-Sub Plug Right Angle Cable Using RG223 Coax. PE3W12449 is a D-Subminiature plug right angle to D-Subminiature plug right angle cable using RG223 coax. This Pasternack D-Subminiature plug right angle to D-Subminiature plug right angle cable assembly uses a 50 Ohm D-Subminiature for connector 1 and a 50 Ohm D-Subminiature for connector 2. D-Subminiature right angle to D-Subminiature right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug D-Subminiature right angle to plug D-Subminiature right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12449 D-Subminiature plug right angle to D-Subminiature plug right angle cable assembly is constructed with RG223 coax.

PE3C11244

Pasternack Enterprises

PE36124-48

Pasternack Enterprises

Key Specifications, Connector Series 1: MC-Card, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MC-Card, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 48 inches. MC-Card Plug to MC-Card Plug Right Angle Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly MC-Card plug to MC-Card plug right angle cable 48 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MC-Card plug to MC-Card plug right angle cable 48 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MC-Card to MC-Card cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MC-Card cable connection on one end and right angle MC-Card cable connection on the other. Our MC-Card to right angle MC-Card cable assemblies have a plug gender on end 1 and plug on end 2. This MC-Card to MC-Card cable is a plug to plug coax assembly, PE36124-48, can also be known as a MC-Card male to right angle MC-Card male cable assembly and will be shipped same-day as it is purchased. MC-Card male to MC-Card male cable assembly PE36124-48 is built with RG316 which is a flexible coax type. The Pasternack flexible MC-Card cable assembly is manufactured with MC-Card to right angle MC-Card cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MC-Card plug to MC-Card right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36124-48 can also be used in the other direction and will be right angle MC-Card plug to MC-Card plug cable assembly if the opposite connectivity is required. MC-Card male to MC-Card right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MC-Card to MC-Card cable assembly for quick shipment worldwide. Variations of MC-Card cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MC-Card plug to MC-Card plug right angle cable 48 inch length using RG316 coax.

1 : $70.69
25 : $67.16
50 : $63.62
100 : $60.79

PE3C1244

Pasternack Enterprises

PE3W12444

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Female to SMA Male Cable Using PE-SR402FL Coax. PE3W12444 is a 3.5mm female to SMA male cable using PE-SR402FL coax. This Pasternack 3.5mm female to SMA male cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm SMA for connector 2. Our female 3.5mm to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W12444 3.5mm female to SMA male cable assembly is constructed with PE-SR402FL coax.

PE3W01244/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm. N Female to N Female 4 Hole Flange Cable Using RG8 Coax with HeatShrink. PE3W01244/HS is a N female to N female 4 hole flange cable using RG8 coax. This Pasternack N female to N female 4 hole flange cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N to female N 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01244/HS N female to N female 4 hole flange cable assembly is constructed with RG8 coax.

PE3C0124-48

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male to N Male Cable 48 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly N male to N male cable 48 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 48 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3C0124-48, can also be known as a type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C0124-48 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack corrugated N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 48 inch length using 1/4 inch superflexible coax.

1 : $280.99
25 : $266.94
50 : $252.89

Venkel Ltd.

PWCR2512-ZK-1244FT

VENKEL LTD

Pulse Withstanding CR;2512;1.5W;�100PPM;1.24M;�1%
RoHS : Compliant

TFCR2512-2W-K-1244DT-1K

VENKEL LTD

Thin Film CR;2512;1/2W;�100PPM;1.24M;�0.5%
RoHS : Compliant

CR0805-8W-1244FT

VENKEL LTD

Chip Resistor;0805;1/8W;1.24M;�1%
RoHS : Compliant

AGCR2512-XL-1244FT

VENKEL LTD

Auto Grade Resistor;2512;1W;�200PPM;1.24M;�1%
RoHS : Compliant

MELFC0207-VK-1244FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�100PPM;1.24M;�1%
RoHS : Compliant

MELFC0207-XE-1244FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�25PPM;1.24M;�1%
RoHS : Compliant

PWCR2010-WK-1244FT

VENKEL LTD

Pulse Withstanding CR;2010;3/4W;�100PPM;1.24M;�1%
RoHS : Compliant

CR0805-8W-1244DT

VENKEL LTD

Chip Resistor;0805;1/8W;1.24M;�0.5%
RoHS : Compliant

MELFC0207-XE-1244DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�25PPM;1.24M;�0.5%
RoHS : Compliant

PWCR2010-WK-1244DT

VENKEL LTD

Pulse Withstanding CR;2010;3/4W;�100PPM;1.24M;�0.5%
RoHS : Compliant

TFCR1206-8W-K-1244DT-1K

VENKEL LTD

Thin Film CR;1206;1/8W;�100PPM;1.24M;�0.5%
RoHS : Compliant

TFCR2512-2W-C-1244FT

VENKEL LTD

Thin Film CR;2512;1/2W;�50PPM;1.24M;�1%
RoHS : Compliant

TFCR2512-2W-E-1244BT

VENKEL LTD

Thin Film CR;2512;1/2W;�25PPM;1.24M;�0.1%
RoHS : Compliant

TFCR1206-8W-K-1244BT-1K

VENKEL LTD

Thin Film CR;1206;1/8W;�100PPM;1.24M;�0.1%
RoHS : Compliant

TFCR1210-4W-E-1244CT-1K

VENKEL LTD

Thin Film CR;1210;1/4W;�25PPM;1.24M;�0.25%
RoHS : Compliant

Vyrian

DS1244PP-70

Analog Devices Inc

Real Time Clock, 0 Timer(s), CMOS
RoHS : Not Compliant

10,596

5962-01-244-3894

Texas Instruments

Operational Amplifier, 1 Func, 7500uV Offset-Max, BIPolar, MBCY8
RoHS : Not Compliant

9,260

SNJ54ACT11244FK

Texas Instruments

Bus Driver, 2-Func, 4-Bit, True Output, CMOS, CQCC28
RoHS : Not Compliant

8,814

ADC12441CIJ

Texas Instruments

ADC, Successive Approximation, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, CDIP28

8,022

DS1244Y-70+

Maxim Integrated Products

Real Time Clock, Volatile, CMOS, PDIP28
RoHS : Compliant

7,271

SN74ALS1244-1N

Texas Instruments

Bus Driver, 2-Func, 4-Bit, True Output, TTL, PDIP20
RoHS : Not Compliant

6,834

SNC54ALS1244AJ

Texas Instruments

Bus Driver, 2-Func, 4-Bit, True Output, TTL, CDIP20
RoHS : Not Compliant

6,513

SN74ALS1244AJ4

Texas Instruments

Bus Driver, 2-Func, 4-Bit, True Output, TTL, CDIP20
RoHS : Not Compliant

6,262

SN74ALS1244ANE4

Texas Instruments

Bus Driver, ALS Series, 2-Func, 4-Bit, True Output, TTL, PDIP20
RoHS : Compliant

6,041

2103124-4

TE Connectivity

Combination Line Connector, 2 Contact(s), Male, Receptacle
RoHS : Compliant

5,934

LT1244IS8#PBF

Analog Devices Inc

Switching Controller, Current-mode, 1A, 500kHz Switching Freq-Max, PDSO8
RoHS : Compliant

5,602

LT1244CN8

Analog Devices Inc

Switching Controller, Current-mode, 1A, 500kHz Switching Freq-Max, BIPolar, PDIP8
RoHS : Not Compliant

5,580

74ACT11244DBE4

Texas Instruments

Bus Driver, ACT Series, 2-Func, 4-Bit, True Output, CMOS, PDSO24
RoHS : Compliant

5,338

74ACT11244DBRE4

Texas Instruments

Bus Driver, ACT Series, 2-Func, 4-Bit, True Output, CMOS, PDSO24
RoHS : Compliant

4,601

SN74ALS1244A-1N3

Texas Instruments

Bus Driver, ALS Series, 2-Func, 4-Bit, True Output, TTL, PDIP20
RoHS : Not Compliant

4,305

Win Source Electronics

R1244N001B-TR-FE

Ricoh Electronic Devices Co Ltd

1,875 : $0.1604
1,400 : $0.1789
1,085 : $0.185
785 : $0.1912
510 : $0.1974
210 : $0.2405

54,000

R1244N001B-FE

Ricoh Electronic Devices Co Ltd

4,000 : $0.097
3,205 : $0.101
2,465 : $0.1051
1,715 : $0.1132
1,105 : $0.1172
520 : $0.1252

10,800

AD7124-4BRUZ-RL7

Analog Devices Inc

4-Channel, Low Noise, Low Power, 24-Bit, Sigma-Delta ADC with PGA and Reference | IC ADC 24BIT SIGMA-DELTA 24TSSOP
RoHS : Compliant

41 : $7.4546
33 : $7.7576
25 : $8.0607
18 : $8.6667
12 : $8.9697
6 : $9.5758

8,000

AD7124-4BRUZ

Analog Devices Inc

4-Channel, Low Noise, Low Power, 24-Bit, Sigma-Delta ADC with PGA and Reference
RoHS : Compliant

41 : $7.4546
33 : $7.7576
25 : $8.0607
18 : $8.6667
12 : $8.9697
6 : $9.5758

8,000

AD7124-4BCPZ

Analog Devices Inc

4-Channel, Low Noise, Low Power, 24-Bit, Sigma-Delta ADC with PGA and Reference | IC ADC 24BIT SIGMA-DELTA 32LFCSP
RoHS : Compliant

43 : $7.0819
34 : $7.3697
27 : $7.6576
19 : $8.2334
12 : $8.5213
6 : $9.097

7,500

AD7124-4BRUZ-RL

Analog Devices Inc

IC ADC 24BIT SIGMA-DELTA 24TSSOP
RoHS : Compliant

41 : $7.4546
33 : $7.7576
25 : $8.0607
18 : $8.6667
12 : $8.9697
6 : $9.5758

7,420

NCP1244AD100R2G

onsemi

IC OFF-LINE CNTRLR PWM CM 7SOIC
RoHS : Compliant

310 : $0.9775
230 : $1.0903
180 : $1.1279
130 : $1.1655
85 : $1.2031
35 : $1.4662

6,843

AD7124-4BCPZ-RL7

Analog Devices Inc

IC ADC 24BIT SIGMA-DELTA 32LFCSP
RoHS : Compliant

43 : $7.0819
34 : $7.3697
27 : $7.6576
19 : $8.2334
12 : $8.5213
6 : $9.097

5,730

AD7124-4BCPZ-RL

Analog Devices Inc

IC ADC 24BIT SIGMA-DELTA 32LFCSP
RoHS : Compliant

43 : $7.0819
34 : $7.3697
27 : $7.6576
19 : $8.2334
12 : $8.5213
6 : $9.097

5,520

ADS1244IDGST

Texas Instruments

IC ADC LP 24-BIT 10-MSOP
RoHS : Compliant

21 : $14.6926
16 : $16.3879
12 : $16.953
9 : $17.5181
6 : $18.0832
3 : $22.0389

3,810

ADS1244IDGSRG4

Texas Instruments

IC ADC LP CONVERT 24BIT 10-MSOP
RoHS : Compliant

37 : $9.2525
30 : $9.6288
23 : $10.0048
16 : $10.757
11 : $11.1331
5 : $11.8854

3,750

ADS1244IDGSR

Texas Instruments

IC ADC LP CONVERT 24BIT 10-MSOP
RoHS : Compliant

37 : $9.2525
30 : $9.6288
23 : $10.0048
16 : $10.757
11 : $11.1331
5 : $11.8854

3,730

AD7124-4BBCPZ

Analog Devices Inc

IC ADC 24BIT SIGMA-DELTA 32LFCSP
RoHS : Compliant

13 : $23.4587
10 : $26.1655
8 : $27.0677
6 : $27.97
4 : $28.8723
2 : $35.188

AD7124-4BBCPZ-RL

Analog Devices Inc

IC ADC 24BIT SIGMA-DELTA 32LFCSP / 24 Bit Analog to Digital Converter 4, 7 Input 1 Sigma-Delta 32-LFCSP (5x5)
RoHS : Compliant

13 : $23.4587
10 : $26.1655
8 : $27.0677
6 : $27.97
4 : $28.8723
2 : $35.188

1244GA Distributor

Link URL