Electronic Components Datasheet Search
  English  ▼

X  



1075-2 Distributor
DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

Onlinecomponents.com		1075-2

 Winchester Interconnect Conn Coaxial PL 50Ohm Crimp ST Cable Mount Gold
RoHS : Compliant
50 : $65.6
38 : $66.94
25 : $96.39
13 : $175.07
0
IJ5C-06-1075-S-D-NDS-2

 Samtec Inc
RoHS : Compliant
100 : $85.48
50 : $120.37
20 : $123.66
10 : $128.96
5 : $134.74
1 : $145.6
0

Avnet Americas		CTX10-7-52M-R

 Eaton Corporation - Trays (Alt: CTX10-7-52M-R)
RoHS : Compliant
120,096 : $5.7327
60,048 : $5.76225
30,024 : $5.7918
15,012 : $5.82135
36 : $6.58571
0
MTMS-107-52-T-S-200

 Samtec Inc - Bulk (Alt: MTMS-107-52-T-S-200)
RoHS : Compliant
0
10-752159-000

 Amphenol Corporation - Bulk (Alt: 10-752159-000)
RoHS : Not Compliant
960 : $12.936
480 : $13.002
240 : $13.068
120 : $13.134
30 : $15.84
0
11107522-00

 TE Connectivity AST4400P00025P4I1000-SS:CTO-13000000-03 - Bag (Alt: 11107522-00)
RoHS : Not Compliant
160 : $256.9875
80 : $263.57693
40 : $270.51315
20 : $277.8243
10 : $293.7
0
120341-0752

 Molex Inter-Series Cable, Receptacle-Plug, M12 Micro-Change to RJ45, 2 m L, Gold, PUR, Green, Brass - Bulk (Alt: 1203410752)
192 : $92.4864
96 : $92.9681
48 : $93.4498
24 : $95.71795
12 : $98.23684
0
CTX10-7-52LP-R

 Eaton Corporation - Trays (Alt: CTX10-7-52LP-R)
RoHS : Compliant
120,000 : $5.2962
60,000 : $5.3235
30,000 : $5.3508
15,000 : $5.3781
60 : $6.08571
0
10-752153-001

 Amphenol Corporation - Bulk (Alt: 10-752153-001)
RoHS : Not Compliant
960 : $13.3182
480 : $13.38615
240 : $13.4541
120 : $13.52205
30 : $16.54667
0
10-752163-000

 Amphenol Corporation - Bulk (Alt: 10-752163-000)
RoHS : Not Compliant
960 : $21.8148
480 : $21.9261
240 : $22.0374
120 : $22.1487
30 : $25.26667
0
10-752155-000

 Amphenol Corporation - Bulk (Alt: 10-752155-000)
RoHS : Not Compliant
960 : $11.3974
480 : $11.45555
240 : $11.5137
120 : $11.57185
30 : $13.97333
0
ECW-H10752RJV

 Panasonic Electronic Components General Purpose Film Capacitor, Metallized PP, Radial Box - 2 Pin, 7500 pF, ? 5%, 283 V, 1 kV - Ammo Pack (Alt: ECW-H10752RJV)
RoHS : Compliant
8,000 : $0.31164
4,000 : $0.31323
2,000 : $0.31482
1,000 : $0.36646
500 : $0.3683
0
ECW-H10752HVB

 Panasonic Electronic Components General Purpose Film Capacitor, Metallized PP, Radial Box - 2 Pin, 7500 pF, ? 3%, 283 V, 1 kV - Bulk (Alt: ECW-H10752HVB)
RoHS : Compliant
8,000 : $0.31625
4,000 : $0.31786
2,000 : $0.31947
1,000 : $0.37183
500 : $0.3737
0
FTR-107-52-L-D

 Samtec Inc - Rail/Tube (Alt: FTR-107-52-L-D)
RoHS : Compliant
10,000 : $0.67619
5,000 : $0.92455
2,000 : $1.16265
1,000 : $1.29232
1 : $2.73715
0
DSC1001DL5-107.5200T

 Microchip Technology Inc MEMS OSC, LVCMOS, 107.52MHz, 10ppm, 1.8-3.3V, -40 to 105C, 2.5x2.0mm - Tape and Reel (Alt: DSC1001DL5-107.5200T)
RoHS : Not Compliant
16,000 : $1.1375
8,000 : $1.16667
4,000 : $1.19737
2,000 : $1.22973
1,000 : $1.3
0
DT1240A-08LP3810-7-52

 Diodes Incorporated - Tape and Reel (Alt: DT1240A-08LP3810-7-52)
RoHS : Compliant
0
FTR-107-52-G-D-TR

 Samtec Inc - Tape and Reel (Alt: FTR-107-52-G-D-TR)
RoHS : Compliant
0

Mouser Electronics		1075-2

 Keystone Electronics Corp Cylindrical Battery Contacts, Clips, Holders & Springs THM BATTERY CONTACT
RoHS : Compliant
1 : $0.4
10 : $0.336
25 : $0.311
100 : $0.278
500 : $0.244
1,000 : $0.217
2,500 : $0.2
5,000 : $0.193
4,557
1075240

 Phoenix Contact Power Supplies - DIN Rail Mount TRIO-PS-2G/1500DC/24DC/8
RoHS : Compliant
1 : $564.46
2
10752

 Heyco Standoffs & Spacers HSCBS6-16 NATURAL NYL PCB Support
RoHS : Compliant
1 : $0.37
10 : $0.31
100 : $0.241
500 : $0.207
1,000 : $0.197
2,000 : $0.179
10,000 : $0.173
25,000 : $0.163
50,000 : $0.158
0
10752

 Carclo Technical Plastics Carclo 3.5 x 3.5mm Hex Holder WHITE
1 : $0.75
10 : $0.511
100 : $0.363
500 : $0.3
1,000 : $0.275
2,500 : $0.258
5,000 : $0.24
10,000 : $0.223
25,000 : $0.206
0
107-52

 Desco Industries Inc Other Tools CARBON STEEL PLUG TAP M11-1.50
RoHS : Not Applicable
1 : $6.9
0
1075-2

 Winchester Interconnect RF Connectors / Coaxial Connectors PLUG, K-LOC
50 : $77.46
100 : $76.72
0
10-752160-000

 Amphenol Corporation Heavy Duty Power Connectors 3.6mm Plug Connector, AMPHE-PD ,8AWG ,1500V
1 : $21.69
10 : $18.43
30 : $16.5
60 : $15.86
120 : $14.92
270 : $13.39
510 : $13.32
0
10-752804-000

 Amphenol Corporation Heavy Duty Power Connectors 5.7MM SEAL PLUG SURLOK PLUS
1 : $2.13
10 : $1.82
25 : $1.59
100 : $1.52
300 : $1.25
500 : $1.19
1,000 : $1.07
2,500 : $0.816
0
10-752155-000

 Amphenol Corporation Amphenol PCBTAILRECEPTACLE
1 : $20.93
10 : $17.79
30 : $14.98
120 : $13.42
510 : $13.4
0
5D002-BKKKKKABXBXBXBXBX-W200

 Well Buying Industrial Co Ltd Multi-Directional Switches MULTI-DIRECTIONAL
1 : $38.96
12 : $26.61
108 : $20.69
0
107521-01

 Amphenol Corporation Circular Push Pull Connectors SOAK CAP FOR PLUG;BLACK
1 : $15.43
10 : $13.68
25 : $13.16
50 : $12.63
100 : $11.93
250 : $10.87
500 : $10.17
0
10-752153-001

 Amphenol Corporation Amphenol Busbar Receptacle. AMPHE-PD
1 : $24.79
10 : $21.07
30 : $19.01
60 : $18.28
120 : $15.9
0
10752F

 Heyco Standoffs & Spacers HSCBS6-16 V-0 NATURAL
RoHS : Compliant
1 : $0.5
10 : $0.419
100 : $0.326
500 : $0.294
1,000 : $0.249
2,000 : $0.222
10,000 : $0.22
25,000 : $0.208
0
5D002-AKKKKKABXBXBXBXBX-W200

 Well Buying Industrial Co Ltd Multi-Directional Switches MULTI-DIRECTIONAL
1 : $32.0
12 : $22.28
108 : $17.24
504 : $15.03
0
5D002-AKKKKKCBXBXBXBXWX-W200

 Well Buying Industrial Co Ltd Multi-Directional Switches MULTI-DIRECTIONAL
1 : $32.0
12 : $22.28
108 : $17.24
504 : $15.03
0

Newark		IRS10752LTRPBF

 Infineon Technologies AG Mosfet Driver, High Side, Sot-23-6; |Infineon Technologies IRS10752LTRPBF
RoHS : Compliant
1 : $0.83
50 : $0.547
100 : $0.485
250 : $0.456
500 : $0.438
1,000 : $0.424
2,500 : $0.416
5,000 : $0.407
3,636
IRS10752LTRPBF

 Infineon Technologies AG Mosfet Driver, High Side, Sot-23-6; |Infineon Technologies IRS10752LTRPBF
RoHS : Compliant
100 : $0.485
250 : $0.456
500 : $0.438
1,000 : $0.424
2,500 : $0.416
5,000 : $0.407
3,636
TMS-107-52-G-S

 Samtec Inc Hdr, Brd-To-Brd, 1.27Mm, 7Pos; |Samtec, Inc. TMS-107-52-G-S
RoHS : Compliant
1 : $1.63
10 : $1.6
25 : $1.56
50 : $1.53
100 : $1.41
250 : $1.38
500 : $1.35
2,500 : $1.07
267
TMS-107-52-G-D

 Samtec Inc Hdr, Brd-To-Brd, 1.27Mm, 14Pos; |Samtec, Inc. TMS-107-52-G-D
RoHS : Compliant
1 : $2.51
10 : $2.47
25 : $2.44
50 : $2.4
100 : $2.18
250 : $2.14
500 : $2.1
1,000 : $1.77
242
MTMS-107-52-G-D-205

 Samtec Inc Hdr, Brd-To-Brd, 1.27Mm, 14Pos; |Samtec, Inc. MTMS-107-52-G-D-205
RoHS : Compliant
1 : $2.65
10 : $2.6
25 : $2.55
50 : $2.5
100 : $2.31
250 : $2.25
500 : $2.19
1,000 : $1.98
242
HTMS-107-52-G-D

 Samtec Inc Pin Header, Htms-107-52-G-D; |Samtec, Inc. HTMS-107-52-G-D
RoHS : Compliant
1 : $2.73
10 : $2.68
25 : $2.64
50 : $2.59
100 : $2.42
250 : $2.38
500 : $2.34
1,000 : $2.01
236
C10-752159-000

 Amphenol Industrial Operations Pwr Conn Rect, 2Pos, Crimp, Cable Mount; |Amphenol Industrial C10-752159-000
RoHS : Compliant
1 : $16.32
5 : $15.42
10 : $14.51
25 : $13.9
50 : $13.73
100 : $13.26
250 : $12.99
199
C10-752157-000

 Amphenol Industrial Operations Pwr Conn Rect, 2Pos, Crimp, Cable Mount; |Amphenol Industrial C10-752157-000
RoHS : Compliant
1 : $34.23
5 : $30.91
10 : $28.56
25 : $25.98
50 : $23.86
100 : $20.6
250 : $19.63
139
FLDWC0311-0.75-2

 TE Connectivity Wire, Red, 0.75Mm, 100M; |Te Connectivity Raychem FLDWC0311-0.75-2
RoHS : Compliant
1 : $158.91
100 : $154.67999
200 : $152.42
34
901-10752

 Amphenol RF Rf Conn, Sma, Blkhd Jack, 50 Ohm; Connector Type:Sma Coaxial; Connector Body Style:Straight Bulkhead Jack; Coaxial Termination:Solder; Impedance:50Ohm; Coaxial Cable Type:0.81Mm Micro; Contact Material:Beryllium Copper Rohs Compliant: Yes
RoHS : Compliant
1 : $13.0
5 : $12.34
10 : $11.67
25 : $11.2
50 : $10.87
100 : $10.15
250 : $10.04
33
MP010752

 SPC Multicomp Multicomp Pro Silk Pla Filaments Provides Very Shinny Surface To Provide Silk-Like Appearance Of The 3D Printed Items. Much More Shiny Than Normal Filaments, Eco-Friendly And Easy To Print. |Multicomp Pro MP010752
RoHS : Compliant
1 : $30.38
4
910752900

 AUER Signal GmbH Tube Base, Signal Tower, 100Mm; |Auer Signal 910752900
RoHS : Compliant
1 : $77.95
5 : $73.54
10 : $71.29
25 : $67.89
50 : $63.23
1
DA61-07526A

 Samsung Semiconductor Door Stopper Lower Ref |Samsung DA61-07526A
RoHS : Not Compliant
1 : $9.74
1
1075-2

 Kings Electronics Conn Rf/Coax Coaxial Straight Plug Crimp; |Kings 1075-2
RoHS : Compliant
50 : $95.86
0
1075-2

 Keystone Electronics Corp Thm Battery Contact; |Keystone 1075-2
RoHS : Not Compliant
1,000 : $0.218
5,000 : $0.203
10,000 : $0.199
0

Analog Devices Inc		ADM1075-2ARUZ

 Analog Devices Inc -48V Hot swap and power monito
RoHS : Compliant
1,450
ADM1075-2ACPZ-RL7

 Analog Devices Inc -48V Hot swap and power monito
RoHS : Compliant
0
ADM1075-2ACPZ

 Analog Devices Inc -48V Hot swap and power monito
RoHS : Compliant
0
ADM1075-2ARUZ-RL7

 Analog Devices Inc -48V Hot swap and power monito
RoHS : Compliant
0

RS		DT50-2B215552 (1075271)

 SICK AG DISTANCE SENSOR, MID-RANGE, 200-30,000 MM, 0.1 RES., 500 HZ, CLASS 1
1 : $1,666.45
9
2451075 (25531532) (MPOI0-801000-100RS)

 RS Pro SCREW, #8-32 X 1 PHILLIPS OVAL MACHINE, ZINC PLATED
1 : $2.45
5
VM107527AB313B

 Norgren VALVE, NHZU 5/2 SOL/SPR EF PBMO
1 : $69.02
2
WTB4SL-3P3161 / 1075216

 SICK AG PROXIMITY SENSOR, BACKGROUND SUPPRESSION, 300MM, 10-30VDC, LASER, PNP, W4 SERIES
1 : $686.09
3 : $631.2
2
1075-2

 Keystone Electronics Corp CONTACT, NEGATIVE, SPRING, THRU-HOLE MOUNT, STAINLESS, NICKEL PLATE, AAA
1,000 : $0.34
2,000 : $0.316
4,000 : $0.306
0
FO-310.75-2RW

 Bimba Manufacturing Company 1-1/2IN BORE ; STROKE: 0.312 INCH(S); THREADED MOUNTING HOLES, REAR [3R]
1 : $172.05
5 : $163.44
10 : $158.28
0
FOD-310.75-2R

 Bimba Manufacturing Company 2-1/2IN BORE ; STROKE: 3.75 INCH(S); TRUNNION MOUNT, REAR [2R]
1 : $215.92
5 : $205.13
10 : $198.65
0
FOR-310.75-2R

 Bimba Manufacturing Company CYLINDER, FLAT-I, REV ACT, 2-1/2INBORE [31]; STROKE: 0.75 INCH(S); TRUNNION MOU
1 : $187.55
5 : $178.17
10 : $172.54
0
FO-310.75-2RL

 Bimba Manufacturing Company 1-1/2IN BORE ; STROKE: 0.312 INCH(S); SCREW CLEARANCE HOLES, FRONT [4F]
1 : $165.76
5 : $157.47
10 : $152.5
0
CTX10-7-52M-R

 Eaton Electronics IND, LCPI,10UH, 11.4A HDR
RoHS : Unknown
36 : $9.71
72 : $9.32
144 : $9.03
0
BFC237510752

 Vishay BCcomponents CAPACITOR, FILM, KP/MKP 7,5NF 5% 630VDC PITCH 15MM
2,000 : $0.88
10,000 : $0.81
20,000 : $0.77
0
FOS-310.75-2FMT

 Bimba Manufacturing Company CYLINDER, FLAT-I, SGL ACT, 2-1/2INBORE [31]; STROKE: 0.75 INCH(S); TRUNNION MOU
1 : $168.45
5 : $160.03
10 : $154.97
0
7522 (00051131075221)

 3M ScotchBrite MultiFlex Sheet Roll, SiC Ula Fine, 8 in x 20 ft
4 : $85.9
8 : $81.61
16 : $79.03
0
120341-0752 (1203410752)

 Woodhead Molex DOUBLE ENDED , M12 FEMALE TO RJ-45 MALE, STRAIGHT, 8 POLE, 2 M, 120341 SERIES
1 : $163.67
5 : $153.85
10 : $148.94
0
3RT10752XJ460LA2 (3RT1075-2XJ46-0LA2)

 Siemens CONTACTOR AC3200 KW/400V 2NO+2NC DC72V
1 : $5,511.09
0

Microchip Technology Inc		DSC1001DL5-107.5200

 Microchip Technology Inc MEMS OSC, LVCMOS, 107.52MHz, 10ppm, 1.8-3.3V, -40 to 105C, 2.5x2.0mm, VDFN, Projected EOL: 2051-07-30
RoHS : Compliant
5,000 : $1.01
1,000 : $1.02
100 : $1.06
25 : $1.16
1 : $1.4
0
DSC1001DL5-107.5200T

 Microchip Technology Inc MEMS OSC, LVCMOS, 107.52MHz, 10ppm, 1.8-3.3V, -40 to 105C, 2.5x2.0mm, VDFN, Projected EOL: 2051-07-30
RoHS : Compliant
5,000 : $1.01
1,000 : $1.02
100 : $1.06
25 : $1.16
1 : $1.4
0

Future Electronics		1075-2

 Keystone Electronics Corp various electromechanical
RoHS : Compliant
1,000 : $0.2
2,000 : $0.198
3,000 : $0.196
4,000 : $0.194
0

Rochester Electronics		ADM1075-2ARUZ

 Analog Devices Inc Power Supply Support Circuit, Adjustable, 1 Channel, DMOS, PDSO28
RoHS : Compliant
10,000 : $8.58
1,000 : $9.12
500 : $9.66
100 : $10.19
25 : $10.73
1,107
ADM1075-2ARUZ-RL7

 Analog Devices Inc Power Supply Support Circuit, Adjustable, 1 Channel, DMOS, PDSO28
RoHS : Compliant
10,000 : $8.58
1,000 : $9.12
500 : $9.66
100 : $10.19
25 : $10.73
14

Sager		TMS-107-52-T-D

 Samtec Inc Headers & Wire Housings Through-hole Micro Header, 0.050 x 0.100 Pitch
RoHS : Compliant
1 : $1.58
50 : $1.23
100 : $0.99
500 : $0.843
1,000 : $0.664
2,000 : $0.604
242
HTMS-107-52-G-D

 Samtec Inc Headers & Wire Housings Through-hole Micro Header, 0.050 x 0.100 Pitch
RoHS : Compliant
1 : $2.92
50 : $2.39
100 : $2.03
500 : $1.8
1,000 : $1.48
2,000 : $1.38
236
1075-2

 Keystone Electronics Corp Cylindrical Battery Contacts, Clips, Holders & Springs THM BATTERY CONTACT
1,000 : $0.1886
2,500 : $0.1727
5,000 : $0.1623
0
CTX10-7-52M-R

 Eaton Bussmann Power Inductors - Leaded 10uH 13.5A 0.008ohms Header Mount
36 : $6.98
72 : $6.59
108 : $6.4
216 : $6.23
0
MTMS-107-52-G-D-000

 Samtec Inc Board to Board & Mezzanine Connectors
RoHS : Compliant
0
MTMS-107-52-T-S-200

 Samtec Inc Board to Board & Mezzanine Connectors
RoHS : Compliant
0
HTMS-107-52-F-D-SM

 Samtec Inc Headers & Wire Housings
RoHS : Compliant
0
FTR-107-52-L-D-P-TR

 Samtec Inc Headers & Wire Housings Surface Mount Micro Header, 0.050 x 0.100 Pitch
RoHS : Compliant
1 : $3.5
50 : $2.86
100 : $2.43
500 : $2.16
1,000 : $1.72
2,000 : $1.57
0
FTR-107-52-T-S

 Samtec Inc Headers & Wire Housings Surface Mount Micro Header, 0.050 x 0.100 Pitch
RoHS : Compliant
1 : $1.15
50 : $0.889
100 : $0.717
500 : $0.611
1,000 : $0.472
2,000 : $0.425
0
11107522-00

 TE Connectivity AST4400P00025P4I1000-SS:CTO-13000000-03
1 : $302.34
2 : $289.56
5 : $281.63
10 : $274.12
0
CTX10-7-52LP-R

 Eaton Bussmann Power Inductors - Leaded 10uH 13.5A 0.008ohms Horizontal Mount
60 : $6.09
120 : $5.92
240 : $5.76
0
HTMS-107-52-T-S

 Samtec Inc Headers & Wire Housings
RoHS : Compliant
0
0386107524

 Molex Barrier Terminal Blocks SR BTS PC 24ASY C
0
FTR-107-52-G-D-P-TR

 Samtec Inc Headers & Wire Housings
RoHS : Compliant
0
FTR-107-52-L-D

 Samtec Inc Headers & Wire Housings Surface Mount Micro Header, 0.050 x 0.100 Pitch
RoHS : Compliant
1 : $2.93
50 : $2.39
100 : $2.03
500 : $1.8
1,000 : $1.39
2,000 : $1.25
0

Coilcraft Direct		SLR1075-221KEC

 Coilcraft Inc Power inductor, shielded, 10% tol, SMT, RoHS, halogen-free
RoHS : Compliant
1 : $1.71
100 : $1.45
300 : $1.26
600 : $0.77
1,200 : $0.69
2,400 : $0.62
150
SLR1075-271KEC

 Coilcraft Inc Power inductor, shielded, 10% tol, SMT, RoHS, halogen-free
RoHS : Compliant
1 : $1.71
100 : $1.45
300 : $1.26
600 : $0.77
1,200 : $0.69
2,400 : $0.62
112
SLR1075-231KEC

 Coilcraft Inc Power inductor, shielded, 10% tol, SMT, RoHS, halogen-free
RoHS : Compliant
1 : $1.71
100 : $1.45
300 : $1.26
600 : $0.77
1,200 : $0.69
2,400 : $0.62
109

TME		79 3107 52 04

 Binder UK Ltd Connector: M5; plug; male; PIN: 4; 1A; straight; IP67; 60V; 2m; 707
100 : $13.15
20 : $15.03
5 : $16.92
1 : $18.8
79
1075-2

 Keystone Electronics Corp Spring contact; A23,A27,AAA,AAAA,N,R03; Batt.no: 1; PCB,THM
100 : $0.232
50 : $0.267
10 : $0.298
0
64.1031-07529

 Stäubli Electrical Connectors Test lead: single; 60VDC; 30VAC; 19A; banana plug 4mm,both sides
25 : $6.43
10 : $6.84
1 : $7.46
0
66.2011-07520

 Stäubli Electrical Connectors Test lead: single; 19A; banana plug 4mm,both sides; Urated: 1000V
25 : $8.02
10 : $8.53
1 : $9.31
0
66.2011-07522

 Stäubli Electrical Connectors Test lead: single; 19A; banana plug 4mm,both sides; Urated: 1000V
25 : $8.02
10 : $8.53
1 : $9.31
0
66.2011-07521

 Stäubli Electrical Connectors Test lead: single; 19A; banana plug 4mm,both sides; Urated: 1000V
25 : $8.02
10 : $8.53
1 : $9.31
0
100010752

 Telegartner Karl Gartner GmbH Fiber patch cord; OM4; ST/UPC,both sides; 2m; 50/125um; violet
3 : $43.64
1 : $46.76
0
66.2011-07523

 Stäubli Electrical Connectors Test lead: single; 19A; banana plug 4mm,both sides; Urated: 1000V
25 : $8.02
10 : $8.53
1 : $9.31
0
SL16SMD10752GP

 Fischer Elektronik GmbH & Co KG Connector: pin strips; pin header; male; PIN: 52; SMT; 3A; 250V; 2x26
20 : $11.86
10 : $13.55
3 : $15.16
1 : $17.11
0
SL16SMD10752G

 Fischer Elektronik GmbH & Co KG Connector: pin strips; pin header; male; PIN: 52; SMT; 3A; 250V; 2x26
20 : $11.86
10 : $13.55
3 : $15.33
1 : $17.11
0
ECWH10752HVB

 Panasonic Electronic Components Capacitor: polypropylene; ECWH; 0.0075uF; 1kVDC; 18x6x17.5mm; THT
RoHS : Compliant
25,000 : $0.336
500 : $0.36
0
66.2011-07524

 Stäubli Electrical Connectors Test lead: single; 19A; banana plug 4mm,both sides; Urated: 1000V
25 : $8.02
10 : $8.53
1 : $9.31
0
66.2011-07528

 Stäubli Electrical Connectors Test lead: single; 19A; banana plug 4mm,both sides; Urated: 1000V
25 : $8.02
10 : $8.53
1 : $9.31
0
66.2011-07527

 Stäubli Electrical Connectors Test lead: single; 19A; banana plug 4mm,both sides; Urated: 1000V
25 : $8.02
10 : $8.53
1 : $9.31
0
66.2011-07525

 Stäubli Electrical Connectors Test lead: single; 19A; banana plug 4mm,both sides; Urated: 1000V
25 : $8.02
10 : $8.53
1 : $9.31
0

Interstate Connecting Components		C10-752685-3AS4

 Amphenol Industrial Operations PLUG WITHOUT SHIELDING & HVIL 3 PORTS
0
10-752159-000

 Amphenol Industrial Operations PLUG CONNECTOR 2 POS, APD, 4 AWG
1 : $22.88
5 : $22.0629
10 : $20.592
25 : $19.305
50 : $17.9061
0
11107522-00

 TE Connectivity AST4400P00025P4I1000-SS:CTO-13
0
10-752153-001

 Amphenol Industrial Operations BUSBAR RECEPTACLE. AMPHE-PD 10-752153-001
0
10-752163-000

 Amphenol Industrial Operations
1 : $36.4963
5 : $35.1929
10 : $32.8466
25 : $30.7938
50 : $28.5624
0
10-752155-000

 Amphenol Industrial Operations RADSOK,PCB TAIL RECPT 2 POS, AMPHE-PD RECTANGULAR CO
1 : $20.1838
5 : $19.4629
10 : $18.1654
25 : $17.03
50 : $15.7959
0
C10-752001-000

 Amphenol Industrial Operations 2.4MM RADSERT ASS
0
C10-752509-360

 Amphenol Industrial Operations AMPHE-BTS DOUBLE MATE PGY CONN
0
10-752854-001

 Amphenol Industrial Operations
0
10-752709-001

 Amphenol Industrial Operations
0
FLHTC0311-0.75-2

 TE Connectivity FLHTC0311-0.75-2
RoHS : Compliant
0
10-752538-081

 Amphenol Industrial Operations SIZE 8 (6-8 AWG) SOCKET
0
11107520-00

 TE Connectivity AST4400P00025P3P1000-SS:CTO-13
0
10-752509-360

 Amphenol Industrial Operations DOUBLE MATE PGY CONNECTOR 10-752509-360
0
C10-752161-000

 Amphenol Industrial Operations REC CONNECTOR, 2 POS(1500V)
0

NexGen Digital		CRCW1210752JRT1

 Vishay Dale
RoHS : Not Compliant
4,829

PEI Genesis		C10-752958-16Y

 Amphenol Corporation
1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
0
10-752155-000

 Amphenol Corporation
1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
0
C10-752070-18FL

 Amphenol Corporation
1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
0
10-752070-18FL

 Amphenol Corporation
1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
0
C10-752854-101

 Amphenol Corporation
1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
0
10-752958-16Y

 Amphenol Corporation
1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
0
C10-752157-000

 Amphenol Corporation
RoHS : Compliant
1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
0
C10-752158-000

 Amphenol Corporation
RoHS : Compliant
1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
0
C10-752854-001

 Amphenol Corporation
1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
0
C10-752159-000

 Amphenol Corporation
RoHS : Compliant
1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
0

Powell Electronics		1601075-2

 TE Connectivity TE COMPONENT (REF 1601075-2)
RoHS : Compliant
50,000 : $0.0907
33,000
MTMS-107-52-S-S-200

 Samtec Inc .050" x .100" Variable Post Height Micro
RoHS : Compliant
1 : $2.16
50 : $1.68
100 : $1.36
500 : $1.15
1,000 : $0.94
176
TMS-107-52-T-S

 Samtec Inc Through-hole Micro Header, 0.050" x 0.10
RoHS : Compliant
1 : $0.954
50 : $0.741
100 : $0.598
500 : $0.509
1,000 : $0.402
176
TMS-107-52-G-S

 Samtec Inc Through-hole Micro Header, 0.050" x 0.10
RoHS : Compliant
1 : $1.98
50 : $1.53
100 : $1.24
500 : $1.05
1,000 : $0.86
176
TMS-107-52-L-S

 Samtec Inc Tiger Buy Socket Strip with PCB Tails, 0
RoHS : Compliant
1 : $1.65
50 : $1.28
100 : $1.04
500 : $0.88
1,000 : $0.69
176
HTMS-107-52-G-S

 Samtec Inc PCB Header, High-Profile, Through-Hole,
RoHS : Compliant
1 : $1.98
50 : $1.53
100 : $1.24
500 : $1.05
1,000 : $0.87
172
HTMS-107-52-S-S

 Samtec Inc Through-hole Micro Header, 0.050" x 0.10
RoHS : Compliant
1 : $2.06
50 : $1.6
100 : $1.3
500 : $1.1
1,000 : $0.91
172
TMS-107-52-T-D

 Samtec Inc Through-hole Micro Header, 0.050" x 0.10
RoHS : Compliant
1 : $1.58
50 : $1.23
100 : $0.99
500 : $0.84
1,000 : $0.66
160
TMS-107-52-S-D

 Samtec Inc Through-hole Micro Header, 0.050" x 0.10
RoHS : Compliant
1 : $3.06
50 : $2.49
100 : $2.12
500 : $1.88
1,000 : $1.54
160
TMS-107-52-G-D

 Samtec Inc Through-hole Micro Header, 0.050" x 0.10
RoHS : Compliant
1 : $2.92
50 : $2.39
100 : $2.03
500 : $1.8
1,000 : $1.48
160
MTMS-107-52-G-D-205

 Samtec Inc .050" x .100" Variable Post Height Micro
RoHS : Compliant
1 : $3.06
50 : $2.5
100 : $2.12
500 : $1.88
1,000 : $1.54
160
HTMS-107-52-G-D

 Samtec Inc Through-hole Micro Header, 0.050" x 0.10
RoHS : Compliant
1 : $2.92
50 : $2.39
100 : $2.03
500 : $1.8
1,000 : $1.48
156
HTMS-107-52-S-D-SM

 Samtec Inc Through-hole Micro Header, 0.050" x 0.10
RoHS : Compliant
1 : $3.66
50 : $2.99
100 : $2.53
500 : $2.25
1,000 : $1.85
102
C10-752158-000

 Amphenol Corporation AMPHE-PD
RoHS : Compliant
1 : $24.06
5 : $23.46
10 : $22.86
25 : $21.71
50 : $20.63
39
RM422-110-752-9100

 AirBorn a molex company 4 Row PCB Connector
RoHS : Not Compliant
1 : $534.5
1

Richardson RFPD		CTX10-7-52M-R

 Eaton Corporation Inductor Power Toroid 10.04uH/10uH 20% 100KHz Powd
RoHS : Compliant
1 : $6.19
150,009 : $4.18
0
CTX10-7-52LP-R

 Eaton Corporation Inductor Power Toroid 10.04uH/10uH 20% 100KHz Powd
RoHS : Compliant
1 : $5.72
150,009 : $3.84
0
ADM1075-2ARUZ

 Analog Devices Inc Hot Swap Controller 1-CH -35V N-Channel Negative V
RoHS : Compliant
0
SI5332HD10752-GM1

 Skyworks Solutions Inc Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 32-P
RoHS : Compliant
0
K410752230HM0H105

 Kendeil srl ALUM ELECTROLYTC CAP
RoHS : Compliant
0
K010752230HM0G105

 Kendeil srl ALUM ELECTROLYTC CAP
RoHS : Compliant
0
ADM1075-2ARUZ-RL7

 Analog Devices Inc Hot Swap Controller 1-CH -35V N-Channel Negative V
RoHS : Compliant
0
CTX10-7-52-R

 Eaton Corporation Inductor Power Toroid 10.04uH/10uH 20% 100KHz Powd
RoHS : Compliant
1 : $4.93
150,009 : $3.33
0
K410752230HM0G105

 Kendeil srl ALUM ELECTROLYTC CAP
RoHS : Compliant
0
K010752230HM0H105

 Kendeil srl ALUM ELECTROLYTC CAP
RoHS : Compliant
0
SI5332HD10752-GM1R

 Skyworks Solutions Inc Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 32-P
RoHS : Compliant
0

Rutronik		CR10-752-JK

 ASJ Holdings Limited RC0402 7,5K 5% 0,063W TK100
RoHS : Compliant
10,000 : $7.0E-4
40,000 : $6.0E-4
50,000 : $6.0E-4
300,000 : $5.0E-4
110,000

Avnet Abacus		2151075-2

 TE Connectivity (Alt: 2151075-2)
RoHS : Not Compliant
0
4-1601075-2

 TE Connectivity Siameze Terminal 1834AWG RCP 762mm 371mm PreTin Over Copper Loose Piece (Alt: 4-1601075-2)
RoHS : Compliant
0
2-1601075-2

 TE Connectivity (Alt: 2-1601075-2)
RoHS : Compliant
0
CTX10-7-52-R

 Eaton Corporation (Alt: CTX10-7-52-R)
RoHS : Compliant
0
CTX10-7-52M-R

 Eaton Corporation (Alt: CTX10-7-52M-R)
RoHS : Compliant
0
FTR-107-52-T-S

 Samtec Inc Conn Unshrouded Header HDR 7 POS 127mm Solder ST SMD Tube (Alt: FTR-107-52-T-S)
RoHS : Compliant
0
CTX10-7-52LP-R

 Eaton Corporation (Alt: CTX10-7-52LP-R)
RoHS : Compliant
0
C10-752001-000

 Amphenol Corporation Conn Power RCP 1 POS Crimp ST Through Hole 1 Terminal 1 Port (Alt: C10-752001-000)
RoHS : Compliant
0
C10-752160-000

 Amphenol Corporation 36mm Plug Connector AMPHEPD 8AWG 1500V (Alt: C10-752160-000)
RoHS : Compliant
0
C10-752161-000

 Amphenol Corporation 36mm Receptacle Connector AMPHEPD 8AWG 1500V (Alt: C10-752161-000)
RoHS : Compliant
0
CBC120210-752

 ITT Interconnect Solutions Backplane 2mm Tempus (Alt: 120210-0752)
RoHS : Compliant
0
C10-752158-000

 Amphenol Corporation (Alt: C10-752158-000)
RoHS : Compliant
0
C10-752804-000

 Amphenol Corporation 57mm SLP Receptacle SEALING CAP (Alt: C10-752804-000)
RoHS : Compliant
0
FTR-107-52-G-S

 Samtec Inc Conn Unshrouded Header HDR 7 POS 127mm Solder ST SMD Tube (Alt: FTR-107-52-G-S)
RoHS : Compliant
0
FTR-107-52-T-S-FR

 Samtec Inc (Alt: FTR-107-52-T-S-FR)
RoHS : Compliant
0

Avnet Asia		C10-752509-360

 Amphenol Corporation PCB BOARD CONNCTOR (Alt: C10-752509-360)
RoHS : Compliant
0
10-752538-081

 Amphenol Corporation CONTACTS-SIZE 8 (6-8 AWG) SOCKET (Alt: 10-752538-081)
RoHS : Compliant
0
C10-752785-130

 Amphenol Corporation SLPIPA16BSB (Alt: C10-752785-130)
RoHS : Compliant
0
C10-752785-030

 Amphenol Corporation SLPIPA16BSO (Alt: C10-752785-030)
RoHS : Compliant
0

DB Roberts		10752F

 Heyco HSCBS6-16 V-0 NATURAL
0
10752

 Heyco HSCBS6-16 NATURAL
0

EBV Elektronik		IRS10752LTRPBF

 Infineon Technologies AG MOSFET Driver High Side 10 V to 18 V supply 160 mA out 140 ns 215 ns onoff SOT236 (Alt: SP001548482)
RoHS : Compliant
0

ECCO		C10-752804-000

 Amphenol Industrial Operations
10 : $2.95
90

Master Electronics		MTMS-107-52-G-D-000

 Samtec Inc .050 x .100 Variable Post Height Micro Terminal Strip
RoHS : Compliant
7,500 : $0.987
5,000 : $1.013
2,500 : $1.274
1,000 : $1.414
500 : $1.812
250 : $1.866
100 : $1.953
10 : $2.404
0
MTMS-107-52-T-S-200

 Samtec Inc .050 x .100 Variable Post Height Micro Terminal Strip
RoHS : Compliant
7,500 : $0.3279
5,000 : $0.3288
2,500 : $0.4143
1,000 : $0.4627
250 : $0.629
50 : $0.75
0
HTMS-107-52-F-D-SM

 Samtec Inc .050 X .100 High-Temp Through-hole Micro Terminal Strip
RoHS : Compliant
7,500 : $0.87
5,000 : $0.893
2,500 : $1.11
1,000 : $1.243
500 : $1.58
250 : $1.627
100 : $1.703
25 : $2.096
0
FTR-107-52-G-D-06

 Samtec Inc
RoHS : Compliant
7,500 : $1.22
5,000 : $1.25
2,500 : $1.53
1,000 : $1.68
500 : $2.26
250 : $2.36
100 : $2.47
10 : $3.04
0
FTR-107-52-L-D-P-TR

 Samtec Inc .050 X .100 Surface Mount Micro Terminal Strip
RoHS : Compliant
7,500 : $1.3
5,000 : $1.31
2,500 : $1.61
1,000 : $1.76
500 : $2.34
250 : $2.45
50 : $2.64
10 : $3.15
0
111075-2000

 Molex Ipass X4 Hd to Hd 3.0 .5M 6919
RoHS : Compliant
390 : $23.94
130 : $24.94
47 : $25.98
12 : $27.06
3 : $28.18
0
FTR-107-52-T-S

 Samtec Inc .050 X .100 Surface Mount Micro Terminal Strip
RoHS : Compliant
7,500 : $0.3594
5,000 : $0.3603
2,500 : $0.4606
1,000 : $0.5284
500 : $0.7123
250 : $0.7141
50 : $0.8788
0
11107522-00

 TE Connectivity AST4400P00025P4I1000-SS:CTO-13000000-03 MOQ Reduction
RoHS : Compliant
10 : $239.26
8 : $244.14
5 : $328.94
3 : $445.44
0
MTMS-107-52-T-S-100

 Samtec Inc
RoHS : Compliant
7,500 : $0.3279
5,000 : $0.3288
2,500 : $0.4143
1,000 : $0.4627
250 : $0.629
50 : $0.75
0
HTMS-107-52-T-S

 Samtec Inc .050 X .100 High-Temp Through-hole Micro Terminal Strip
RoHS : Compliant
15,000 : $0.24
10,000 : $0.2466
7,500 : $0.3131
5,000 : $0.3151
2,500 : $0.4
1,000 : $0.4328
250 : $0.5968
50 : $0.7115
0
ECW-H10752RJV

 Panasonic Electronic Components Cap Film 0.0075uF 1000V PP 5% (18 X 6 X 17.5mm) Radial 7.5mm 105°C Ammo
RoHS : Compliant
25,000 : $0.3086
15,000 : $0.3133
10,000 : $0.318
7,500 : $0.3229
5,000 : $0.3278
2,500 : $0.3419
1,000 : $0.3683
500 : $0.3739
0
HTMS-107-52-G-D

 Samtec Inc .050 X .100 High-Temp Through-hole Micro Terminal Strip
RoHS : Compliant
7,500 : $1.08
5,000 : $1.11
2,500 : $1.36
1,000 : $1.51
500 : $1.89
250 : $1.98
100 : $2.09
10 : $2.36
0
FTR-107-52-G-D-P-TR

 Samtec Inc Conn Unshrouded Header HDR 14 POS 1.27mm Solder ST SMD T/R
RoHS : Compliant
7,500 : $1.35
5,000 : $1.36
2,500 : $1.68
1,000 : $1.85
500 : $2.46
250 : $2.57
50 : $2.77
10 : $3.31
0
113011-0752C

 ITT Interconnect Solutions CIRCULAR
RoHS : Not Compliant
250 : $61.79
188 : $63.05
125 : $92.87
63 : $180.37
0
ECW-H10752HVB

 Panasonic Electronic Components Cap Film 0.0075uF 1000V PP 3% (18 X 6 X 17.5mm) Radial 10mm 105°C Bulk
RoHS : Compliant
15,000 : $0.3179
10,000 : $0.3227
7,500 : $0.3276
5,000 : $0.3326
2,500 : $0.3469
1,000 : $0.3737
500 : $0.3794
100 : $0.4669
0

Pasternack Enterprises US		PE3C10752

 Pasternack Enterprises Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. 1.85mm Male to 3.5mm Female Bulkhead Cable Using PE-SR405FL Coax., Pasternack’s PE3C10752 1.85mm male to 3.5mm female bulkhead RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 3.5mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 3.5mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 3.5mm bulkhead cable connection on the other. Our 1.85mm to 3.5mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10752 can also be known as a 1.85mm plug to 3.5mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to bulkhead 3.5mm female cable has a maximum VSWR of 1.4:1. This PE3C10752 1.85mm plug to 3.5mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 3.5mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10752 can also be used in the other direction and will be a 3.5mm female bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 3.5mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 3.5mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 3.5mm RF cable assembly as per your requirements.
10
PE3C10752-12

 Pasternack Enterprises Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.85mm Male to 3.5mm Female Bulkhead Cable 12 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10752-12 1.85mm male to 3.5mm female bulkhead RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 3.5mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 3.5mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 3.5mm bulkhead cable connection on the other. Our 1.85mm to 3.5mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10752-12 can also be known as a 1.85mm plug to 3.5mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to bulkhead 3.5mm female cable has a maximum VSWR of 1.4:1. This PE3C10752-12 1.85mm plug to 3.5mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 3.5mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10752-12 can also be used in the other direction and will be a 3.5mm female bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 3.5mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 3.5mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 3.5mm RF cable assembly as per your requirements.
1 : $327.21
10 : $314.12
25 : $301.03
100 : $287.94
2
PE3C10752-9

 Pasternack Enterprises Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 1.85mm Male to 3.5mm Female Bulkhead Cable 9 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10752-9 1.85mm male to 3.5mm female bulkhead RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 3.5mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 3.5mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 3.5mm bulkhead cable connection on the other. Our 1.85mm to 3.5mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10752-9 can also be known as a 1.85mm plug to 3.5mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to bulkhead 3.5mm female cable has a maximum VSWR of 1.4:1. This PE3C10752-9 1.85mm plug to 3.5mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 3.5mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10752-9 can also be used in the other direction and will be a 3.5mm female bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 3.5mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 3.5mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 3.5mm RF cable assembly as per your requirements.
1 : $322.32
10 : $309.43
25 : $296.53
100 : $283.64
2
PE3C10752-24

 Pasternack Enterprises Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 1.85mm Male to 3.5mm Female Bulkhead Cable 24 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10752-24 1.85mm male to 3.5mm female bulkhead RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 3.5mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 3.5mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 3.5mm bulkhead cable connection on the other. Our 1.85mm to 3.5mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10752-24 can also be known as a 1.85mm plug to 3.5mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to bulkhead 3.5mm female cable has a maximum VSWR of 1.4:1. This PE3C10752-24 1.85mm plug to 3.5mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 3.5mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10752-24 can also be used in the other direction and will be a 3.5mm female bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 3.5mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 3.5mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 3.5mm RF cable assembly as per your requirements.
1 : $346.8
10 : $332.93
25 : $319.06
100 : $305.18
2
PE3C10752-6

 Pasternack Enterprises Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 1.85mm Male to 3.5mm Female Bulkhead Cable 6 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10752-6 1.85mm male to 3.5mm female bulkhead RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 3.5mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 3.5mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 3.5mm bulkhead cable connection on the other. Our 1.85mm to 3.5mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10752-6 can also be known as a 1.85mm plug to 3.5mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to bulkhead 3.5mm female cable has a maximum VSWR of 1.4:1. This PE3C10752-6 1.85mm plug to 3.5mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 3.5mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10752-6 can also be used in the other direction and will be a 3.5mm female bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 3.5mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 3.5mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 3.5mm RF cable assembly as per your requirements.
1 : $317.42
10 : $304.72
25 : $292.03
100 : $279.33
2
PE3C10752-18

 Pasternack Enterprises Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 1.85mm Male to 3.5mm Female Bulkhead Cable 18 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10752-18 1.85mm male to 3.5mm female bulkhead RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 3.5mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 3.5mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 3.5mm bulkhead cable connection on the other. Our 1.85mm to 3.5mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10752-18 can also be known as a 1.85mm plug to 3.5mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to bulkhead 3.5mm female cable has a maximum VSWR of 1.4:1. This PE3C10752-18 1.85mm plug to 3.5mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 3.5mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10752-18 can also be used in the other direction and will be a 3.5mm female bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 3.5mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 3.5mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 3.5mm RF cable assembly as per your requirements.
1 : $337.01
10 : $323.53
25 : $310.05
100 : $296.57
2
PE3W10752-36

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Female Low Loss Cable 36 Inch Length Using PE-C195 Coax., Radio frequency assembly SMA male to SMA female low loss cable 36 inch length using PE-C195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable 36 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W10752-36 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10752-36 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMA jack cable assembly PE3W10752-36 is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W10752-36 can also be used in the other direction and will be a SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.
1 : $181.99
10 : $174.71
25 : $167.43
100 : $160.15
0
PE3W10752

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Low Loss Cable Using PE-C195 Coax., Radio frequency assembly SMA male to SMA female low loss cable using PE-C195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W10752 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10752 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMA jack cable assembly PE3W10752 is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W10752 can also be used in the other direction and will be a SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.
0
PE3W10752-24

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Female Low Loss Cable 24 Inch Length Using PE-C195 Coax., Radio frequency assembly SMA male to SMA female low loss cable 24 inch length using PE-C195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable 24 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W10752-24 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10752-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMA jack cable assembly PE3W10752-24 is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W10752-24 can also be used in the other direction and will be a SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.
1 : $179.99
10 : $172.79
25 : $165.59
100 : $158.39
0
PE3W10752-60

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to SMA Female Low Loss Cable 60 Inch Length Using PE-C195 Coax., Radio frequency assembly SMA male to SMA female low loss cable 60 inch length using PE-C195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable 60 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W10752-60 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10752-60 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMA jack cable assembly PE3W10752-60 is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W10752-60 can also be used in the other direction and will be a SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.
1 : $184.99
10 : $177.59
25 : $170.19
100 : $162.79
0
PE3W10752-48

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Female Low Loss Cable 48 Inch Length Using PE-C195 Coax., Radio frequency assembly SMA male to SMA female low loss cable 48 inch length using PE-C195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable 48 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W10752-48 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10752-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMA jack cable assembly PE3W10752-48 is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W10752-48 can also be used in the other direction and will be a SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.
1 : $184.99
10 : $177.59
25 : $170.19
100 : $162.79
0
PE3W10752-12

 Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Female Low Loss Cable 12 Inch Length Using PE-C195 Coax., Radio frequency assembly SMA male to SMA female low loss cable 12 inch length using PE-C195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable 12 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W10752-12 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10752-12 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMA jack cable assembly PE3W10752-12 is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W10752-12 can also be used in the other direction and will be a SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.
1 : $177.99
10 : $170.87
25 : $163.75
100 : $156.63
0

Teledyne HiRel		M38510/75203BDA

 Teledyne HiRel AND GATE, QUAD 2-INPUT
RoHS : Not Compliant
0
M38510/75201B2A

 Teledyne HiRel OR GATE, QUAD 2-INPUT
RoHS : Not Compliant
0
M38510/75204BCA

 Teledyne HiRel AND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant
0
M38510/75201BCA

 Teledyne HiRel OR GATE, QUAD 2-INPUT
RoHS : Not Compliant
0
M38510/75203B2A

 Teledyne HiRel AND GATE, QUAD 2-INPUT
RoHS : Not Compliant
0
M38510/75202B2A

 Teledyne HiRel EXCLUSIVE-OR GATE, QUAD 2-INPUT
RoHS : Not Compliant
0
M38510/75202BDA

 Teledyne HiRel EXCLUSIVE-OR GATE, QUAD 2-INPUT
RoHS : Not Compliant
0
M38510/75201BDA

 Teledyne HiRel OR GATE, QUAD 2-INPUT
RoHS : Not Compliant
0
M38510/75204B2A

 Teledyne HiRel AND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant
0
M38510/75202BCA

 Teledyne HiRel EXCLUSIVE-OR GATE, QUAD 2-INPUT
RoHS : Not Compliant
0
M38510/75203BCA

 Teledyne HiRel AND GATE, QUAD 2-INPUT
RoHS : Not Compliant
0
M38510/75204BDA

 Teledyne HiRel AND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant
0

Venkel Ltd.		TRCR1210-752MT

 VENKEL LTD Trimmable CR;1210;7.5K;�20%
RoHS : Compliant
0

Vyrian		ADM1075-2ACPZ

 Analog Devices Inc Power Supply Support Circuit, Adjustable, 1 Channel, DMOS
RoHS : Compliant
10,924
ADM1075-2ACPZ-RL7

 Analog Devices Inc Power Supply Support Circuit, Adjustable, 1 Channel, DMOS
RoHS : Compliant
10,462
ADM1075-2ARUZ

 Analog Devices Inc Power Supply Support Circuit, Adjustable, 1 Channel, DMOS, PDSO28
RoHS : Compliant
10,278
ADM1075-2ARUZ-RL7

 Analog Devices Inc Power Supply Support Circuit, Adjustable, 1 Channel, DMOS, PDSO28
RoHS : Compliant
5,278
5962-01-075-2720

 Texas Instruments Line Driver/Receiver, 4 Driver, BIPolar, CDIP16
RoHS : Not Compliant
5,162
1203410752

 Molex Cable Assembly
RoHS : Compliant
758

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com