| Electronic Components Datasheet Search |
|
10448 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 104484-8300 | Molex | Terminal: flat |
| 96,000 | |
| 5-104481-6 | TE Connectivity | Connector: wire-board; socket; female; Automotive; Inom: 3A; tinned RoHS : Compliant |
| 63,000 | ||
| 1-104480-2 | TE Connectivity | Contact; female; data; AMPMODU MTE; copper alloy; gold-plated RoHS : Compliant |
| 21,952 | ||
| 1-104480-4 | TE Connectivity | Connector: wire-board; socket; female; Automotive; Inom: 3A; tinned RoHS : Compliant |
| 10,000 | ||
| 1-104480-5 | TE Connectivity | Contact; female; data; AMPMODU MTE; copper alloy; gold-plated RoHS : Compliant |
| 6,886 | ||
| 1-104482-5 | TE Connectivity | Connector: wire-board; AMPMODU; female; data; Inom: 3A; PIN: 34 RoHS : Compliant |
| 4,000 | ||
| 104483-2 | TE Connectivity | Connector: wire-board; AMPMODU; female; data; Inom: 3A; PIN: 18 RoHS : Compliant |
| 1,580 | ||
| 1-104482-3 | TE Connectivity | Connector: wire-board; AMPMODU; female; data; Inom: 3A; PIN: 30 RoHS : Compliant |
| 1,050 | ||
| AV-10448 | Honeywell Sensing and Control | Sensor: Hall |
| 770 | ||
| 52104480 | Lapp Group | Reduction of threads for glands; M20; M40; polyamide; Pitch: 1.5 RoHS : Compliant |
| 70 | ||
| 52104481 | Lapp Group | Reduction of threads for glands; M25; M40; polyamide; Pitch: 1.5 RoHS : Compliant |
| 44 | ||
| 93601-0448 | Molex | Connector: HDC; contact insert; male; GWconnect; PIN: 13; 400V; 10A |
| 20 | ||
| 1044822 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 32A; 1kV RoHS : Compliant |
| 0 | ||
| 3104486 | Gedore Torque Ltd | Pliers: adjustable; for pipe gripping; Pliers len: 408mm |
| 0 | ||
| 1044820 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 32A; 1kV RoHS : Compliant |
| 0 | ||
![]() Verical | 104480-4 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Reel RoHS : Not Compliant |
| 115,000 | |
| 104480-2 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Reel RoHS : Not Compliant |
| 90,000 | ||
| 104480-9 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Loose RoHS : Not Compliant |
| 22,084 | ||
| 104480-9 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Loose RoHS : Not Compliant |
| 13,500 | ||
| 104480-8 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Loose RoHS : Not Compliant |
| 9,700 | ||
| 104480-9 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Loose RoHS : Not Compliant |
| 9,392 | ||
| 10448-C | Approved Technology | 10448-C |
| 5,467 | ||
| 104482-9 | TE Connectivity | Conn Housing RCP 20 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 3,692 | ||
| 104483-9 | TE Connectivity | Conn Housing RCP 14 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 3,525 | ||
| 104483-9 | TE Connectivity | Conn Housing RCP 14 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 2,261 | ||
| 104482-9 | TE Connectivity | Conn Housing RCP 20 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 2,050 | ||
| 10448 | Heyco | 10448 |
| 1,000 | ||
| 104483-8 | TE Connectivity | Conn Housing RCP 64 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 960 | ||
| 104480-8 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Loose RoHS : Not Compliant |
| 470 | ||
| 104480-8 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Loose RoHS : Not Compliant |
| 305 | ||
![]() Avnet Americas | 1-104480-3 | TE Connectivity | - Tape and Reel (Alt: 1-104480-3) RoHS : Compliant |
| 240,000 | |
| 1-104480-2 | TE Connectivity | Contact, MTE, Socket, Crimp, 22 AWG, Gold Plated Contacts, AMPMODU Short Point Connectors - Tape and Reel (Alt: 1-104480-2) RoHS : Compliant |
| 210,000 | ||
| 1-104480-7 | TE Connectivity | Contact, MTE, Socket, Crimp, 22 AWG, Tin Plated Contacts, AMPMODU Short Point Series Connectors - Tape and Reel (Alt: 1-104480-7) RoHS : Compliant |
| 105,000 | ||
| 104480-9 | TE Connectivity | - Bag (Alt: 104480-9) RoHS : Not Compliant |
| 46,000 | ||
| 1-104480-4 | TE Connectivity | Contact, AMPMODU Short Point, Socket, Crimp, 22 AWG, Tin Plated Contacts - Bag (Alt: 1-104480-4) RoHS : Compliant |
| 40,220 | ||
| 1-104480-5 | TE Connectivity | - Bag (Alt: 1-104480-5) RoHS : Compliant |
| 38,459 | ||
| 1-104481-1 | TE Connectivity | - Tape and Reel (Alt: 1-104481-1) RoHS : Compliant |
| 15,000 | ||
| 1-104480-6 | TE Connectivity | Contact, AMPMODU Short Point, Socket, Crimp, 22 AWG, Gold Plated Contacts - Bag (Alt: 1-104480-6) RoHS : Compliant |
| 8,918 | ||
| 104481-8 | TE Connectivity | - Bag (Alt: 104481-8) RoHS : Not Compliant |
| 3,145 | ||
| 104482-5 | TE Connectivity | - Bulk (Alt: 104482-5) RoHS : Compliant |
| 136 | ||
| ESQ-104-48-L-D | Samtec Inc | - Bulk (Alt: ESQ-104-48-L-D) RoHS : Compliant |
| 0 | ||
| ESQ-104-48-S-T-LL | Samtec Inc | - Bulk (Alt: ESQ-104-48-S-T-LL) RoHS : Compliant |
| 0 | ||
| 1-104482-0 | TE Connectivity | - Bulk (Alt: 1-104482-0) RoHS : Compliant |
| 0 | ||
| 93601-0448 | Molex | Rectangular Insert, Male, 12 Contacts, Heavy-Duty 93601 Series, Polycarbonate, -40 to 125 ?C, Bag - Bulk (Alt: 0936010448) RoHS : Compliant |
| 0 | ||
| 104483-5 | TE Connectivity | Conn Housing RCP 30 POS 2.54mm Crimp ST Cable Mount - Bulk (Alt: 104483-5) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | 104480-4 | TE Connectivity | Headers & Wire Housings SHORT POINT CONTACT Cut Strip of 100 RoHS : Not Compliant |
| 4,700 | |
| 104482-3 | TE Connectivity | Headers & Wire Housings CONN HOUSING 8 POS NON-POLARIZED RoHS : Compliant |
| 3,114 | ||
| 104482-5 | TE Connectivity | Headers & Wire Housings CONN HOUSING 12 POS NON-POLARIZED RoHS : Compliant |
| 2,490 | ||
| 104482-1 | TE Connectivity | Headers & Wire Housings CONN HOUSING 4 POS NON-POLARIZED RoHS : Compliant |
| 2,375 | ||
| 104483-3 | TE Connectivity | Headers & Wire Housings CONN HOUSING 20 POS POLARIZED RoHS : Compliant |
| 2,230 | ||
| 104482-6 | TE Connectivity | Headers & Wire Housings CONN HOUSING 14 POS NON-POLARIZED RoHS : Compliant |
| 2,082 | ||
| 104483-5 | TE Connectivity | Headers & Wire Housings CONN HOUSING 30 POS POLARIZED RoHS : Compliant |
| 1,690 | ||
| 104482-7 | TE Connectivity | Headers & Wire Housings CONN HOUSING 16 POS NON-POLARIZED RoHS : Compliant |
| 1,371 | ||
| 104482-8 | TE Connectivity | Headers & Wire Housings CONN HOUSING 18 POS NON-POLARIZED RoHS : Compliant |
| 1,108 | ||
| 104483-8 | TE Connectivity | Headers & Wire Housings CONN HOUSING 64 POS POLARIZED RoHS : Compliant |
| 690 | ||
| 104481-8 | TE Connectivity | Headers & Wire Housings SOCKET 32-28 AWG RoHS : Not Compliant |
| 265 | ||
| 104483-1 | TE Connectivity | Headers & Wire Housings CONN HOUSING 8 POS POLARIZED RoHS : Compliant |
| 115 | ||
| 10448 | Desco Industries Inc | Chemicals REZTORE SURFACE & MAT CLEANER 2.5 GAL RoHS : Compliant |
| 23 | ||
| 10448 | Heyco | Standoffs & Spacers HSP-MDL-1-06M NAT NYL PCB Support RoHS : Compliant |
| 0 | ||
| TL50GYBRAQP | Banner Engineering Corp | Tower Lights - Assembled Tower Light: 4-Color Audible Indicator; Voltage: 18-30 V dc or 24 V ac; Environmental Rating: IP50; Input: Bimodal; Colors: Green Yellow Blue Red; 150 mm (6 in) 8-pin M12 PVC Pigtail QD |
| 0 | ||
![]() Arrow Electronics | 104480-2 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Reel RoHS : Not Compliant |
| 90,000 | |
| 104480-8 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Loose RoHS : Not Compliant |
| 9,700 | ||
| 104480-9 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Loose RoHS : Not Compliant |
| 9,392 | ||
| 104483-9 | TE Connectivity | Conn Housing RCP 14 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 2,261 | ||
| 104480-8 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Loose RoHS : Not Compliant |
| 470 | ||
| 104480-8 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Loose RoHS : Not Compliant |
| 305 | ||
![]() Newark | 1-104480-4 | TE Connectivity | Contact, Ampmodu Short Point Series, Soc; |Te Connectivity Amp 1-104480-4 RoHS : Compliant |
| 47,951 | |
| 1-104480-4 | TE Connectivity | Contact, Receptacle, 26-22Awg, Crimp; Product Range:Ampmodu Short Point Series; Contact Gender:Socket; Contact Termination Type:Crimp; Wire Size Awg Max:22Awg; Contact Plating:Tin Plated Contacts; Wire Size Awg Min:26Awg Rohs Compliant: Yes RoHS : Compliant |
| 47,575 | ||
| 1-104481-1 | TE Connectivity | Contact, Socket, 32Awg-28Awg, Crimp; |Te Connectivity Amp 1-104481-1 RoHS : Compliant |
| 22,974 | ||
| 104480-8 | TE Connectivity | Contact, Socket, 26-22Awg, Crimp; |Te Connectivity Amp 104480-8 RoHS : Not Compliant |
| 6,472 | ||
| 1-104481-1 | TE Connectivity | Contact, 28Awg, Socket, Crimp; |Te Connectivity Amp 1-104481-1 RoHS : Compliant |
| 1,123 | ||
| 104480-9 | TE Connectivity | Contact, Socket, 22Awg, Crimp; |Te Connectivity Amp 104480-9 RoHS : Not Compliant |
| 743 | ||
| ESQ-104-48-L-D | Samtec Inc | Connector, Rcpt, 8Pos, 2Row, 2.54Mm; |Samtec, Inc. ESQ-104-48-L-D RoHS : Compliant |
| 152 | ||
| ESW-104-48-L-D | Samtec Inc | Connector, Rcpt, 8Pos, 2Row, 2.54Mm; |Samtec, Inc. ESW-104-48-L-D RoHS : Compliant |
| 152 | ||
| ESQ-104-48-S-T-LL | Samtec Inc | Connector, Rcpt, 12Pos, 3Row, 2.54Mm; |Samtec, Inc. ESQ-104-48-S-T-LL RoHS : Compliant |
| 117 | ||
| ESQ-104-48-S-S | Samtec Inc | Connector, Rcpt, 4Pos, 1Row, 2.54Mm; |Samtec, Inc. ESQ-104-48-S-S RoHS : Compliant |
| 80 | ||
| ESQ-104-48-L-S-LL | Samtec Inc | Connector, Rcpt, 4Pos, 1Row, 2.54Mm; |Samtec, Inc. ESQ-104-48-L-S-LL RoHS : Compliant |
| 66 | ||
| 104480-9 | TE Connectivity | Contact, Receptacle, 26-22Awg, Crimp; Product Range:Ampmodu Mte Series; Contact Gender:Socket; Wire Size Awg Min:26Awg; Wire Size Awg Max:22Awg; Contact Termination Type:Crimp; Contact Material:Copper Alloy; Current Rating:3A Rohs Compliant: No RoHS : Not Compliant |
| 26 | ||
| 135101-04-48.00 | Amphenol RF | Cable Assy, Rg-58, Black, 48In; |Amphenol Rf 135101-04-48.00 RoHS : Compliant |
| 25 | ||
| 10448 | Desco Industries Inc | Alcohol-Free Esd Surface & Mat Cleaner; Cleaner Type:Surface; Cleaner Applications:Mat, Surfaces; Dispensing Method:Bag; Volume:10L; Weight:-; Product Range:Reztore Series Rohs Compliant: Yes |Desco 10448 RoHS : Compliant |
| 0 | ||
| 10448 | Desco Industries Inc | Cleaner, Bag In Box, 10L; |Desco 10448 RoHS : Compliant |
| 0 | ||
![]() RS | 1-104480-6 | TE Connectivity | CONTACT SOCKET COPPER ALLOY, 26-22 AWG 300 VAC 750 V, AMPMODU MOD IV/V SERIES RoHS : Compliant |
| 20,599 | |
| 1-104480-4 | TE Connectivity | CONTACT, SOCKET, CRIMP, 22AWG, TIN PLATED CONTACTS, AMPMODU SHORT POINT SERIES RoHS : Compliant |
| 9,110 | ||
| 1-104480-5 | TE Connectivity | CONTACT SOCKET COPPER ALLOY, 26-22 AWG 300 VAC 750 V, AMPMODU MOD IV/V SERIES RoHS : Compliant |
| 2,534 | ||
| 104480-9 | TE Connectivity | CONNECTOR SOCKET, 26-22AWG, CRIMP, FEMALE SOCKET, 3A, 300VAC, AMPMODU SERIES RoHS : Not Compliant |
| 1,635 | ||
| 135101-04-48.00 | Amphenol RF | CABLE ASSEMBLY, STRAIGHT PLUG TO STRAIGHT PLUG, RG-58/U, 48 IN, SMA SERIES |
| 9 | ||
| FN3270H-10-44 (806179) | TE Connectivity | 3-PHASE 10 A CHASSIS MOUNT INPUT FILTER SAFETY TERMINAL BLOCK HIGH VOLTAGE |
| 5 | ||
| 1104482 | RS Pro | THERMOCOUPLE TYPE K 6.56 FT (2M) 500F (260C) MAX 1/0.2 STRANDING 22AWG |
| 3 | ||
| 120066-1044 (885030K03M150) | Woodhead Molex | DOUBLE-ENDED, 5 POLE, M12 MALE TO FEMALE, 18 AWG, TPE, 15 M, 120066 SERIES |
| 1 | ||
| 10448 | Master Appliance Corp | MASTER ULTRATANE BUTANE, NON-CLOGGING,15/16 OZ (26 G),CANISTER, FILLER TIP |
| 0 | ||
| 10448 | Desco Industries Inc | REZTORE SURFACE & MAT CLEANER, R 2.5 GAL REFILL |
| 0 | ||
| 10448 | Heyco | NYLON PCB SUPPORTS, METRIC SPACING, TEARDROP SNAP LOCK, HSP-MDL-1-06M |
| 0 | ||
| 10448 | Master Appliance Corp | MASTER ULTRATANE BUTANE, NON-CLOGGING,1 OZ (29.5ML),CAN, ALL MATER HEAT TOOLS |
| 0 | ||
| 1-104482-0 | TE Connectivity | TE; IND DEVICES; RECTANGULAR/PCB CONNECTORS; 22 SHORT PT RCPT HSG DR .100CL RoHS : Compliant |
| 0 | ||
| SS-88104-48 (SS8810448) | Isostatic Industries Inc | SLEEVE BEARING, SS-88104-48 2.754 X 3.255 X 3IN, POWDERED METAL BRONZE |
| 0 | ||
| SS-96104-48 (SS9610448) | Isostatic Industries Inc | SLEEVE BEARING, SS-96104-48 3.005 X 3.255 X 3IN, POWDERED METAL BRONZE |
| 0 | ||
![]() Bisco Industries | 104480-9 | TE Connectivity | RoHS : Not Compliant | 1,877 | ||
| 5610-448-15 | Seastrom Mfg | 1,635 | ||||
| 10448 | Heyco | 300 | ||||
| 104480-6 | TE Connectivity | 267 | ||||
| 1-104481-2 | TE Connectivity | RoHS : Compliant | 200 | |||
| 10-448-1-05 | NEW SURPLUS CELL 2 | 119 | ||||
| 5610-448-20 | Seastrom Mfg | 50 | ||||
| 104480-8 | TE Connectivity | RoHS : Not Compliant | 19 | |||
| 104480-7 | TE Connectivity | RoHS : Not Compliant | 4 | |||
| 104483-4 | TE Connectivity | RoHS : Compliant | 4 | |||
![]() Future Electronics | 10448 | Heyco | RoHS : Compliant |
| 0 | |
![]() Onlinecomponents.com | AV-10448 | Honeywell Sensing and Control | Board Mount Hall Effect / Magnetic Sensors Magnetic Sensors |
| 1,164 | |
| 10448 | Heyco | HSP-MDL-1-06M NATURAL RoHS : Compliant |
| 1,000 | ||
| 10448 | Desco Industries Inc | 10448 ReztoreA® Surface and Mat Cleaner, Alcohol-Free, 2.5 Gallon Bag-in-Box Refill with Spigot RoHS : Compliant |
| 0 | ||
| HE.10448 | Greenlee Textron Inc | Handle | Greenlee HE.10448 RoHS : Compliant |
| 0 | ||
| 01002-10448 | BEI Sensors | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | SN104487DR | Texas Instruments | ANALOG AUTOMOTIVE RoHS : Not Compliant |
| 32,500 | |
![]() Sager | ESQ-104-48-L-D | Samtec Inc | PC / 104 Connectors Elevated Socket Strip, 0.100 Pitch RoHS : Compliant |
| 152 | |
| ESQ-104-48-S-T-LL | Samtec Inc | PC / 104 Connectors Elevated Socket Strip, 0.100 Pitch RoHS : Compliant |
| 117 | ||
| ESQ-104-48-S-S | Samtec Inc | PC / 104 Connectors Elevated Socket Strip, 0.100 Pitch RoHS : Compliant |
| 80 | ||
| 1-104482-0 | TE Connectivity | Headers & Wire Housings CONN HOUSING 22 POS NON-POLARIZED RoHS : Compliant |
| 0 | ||
| 1044848300 | Molex | IDT TERMINAL (0.65-0.75MM AL-WIRE DIA) |
| 0 | ||
| AA1-X0-10-448-431-P | Carling Technologies | Circuit Breakers | 0 | |||
| ESQ-104-48-G-D-LL | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| 104483-5 | TE Connectivity | Headers & Wire Housings CONN HOUSING 30 POS POLARIZED RoHS : Compliant |
| 0 | ||
| 0334710448 | Molex | Molex | 0 | |||
| ESQ-104-48-S-D-LL | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| ESW-104-48-G-D-LL | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| 468-10448-001 | Carling Technologies | Switch Actuators VVPZE1F-100 | 0 | |||
| 5-104481-2 | TE Connectivity | Headers & Wire Housings SHORT POINT RoHS : Compliant |
| 0 | ||
| 104482-9 | TE Connectivity | Headers & Wire Housings CONN HOUSING 20 POS NON-POLARIZED RoHS : Compliant | 0 | |||
| 104482-6 | TE Connectivity | Headers & Wire Housings CONN HOUSING 14 POS NON-POLARIZED RoHS : Compliant | 0 | |||
![]() ComSIT USA | SN104487DR | Texas Instruments | Electronic Component RoHS : Not Compliant | 50,000 | ||
![]() Interstate Connecting Components | 1-104481-0 | TE Connectivity | CUT STRIP - SHORT POINT CONT 15 DPLX LF STMP RoHS : Compliant |
| 500 | |
| 104480-9 | TE Connectivity | SHORT POINT RECP CONT LP RoHS : Not Compliant |
| 359 | ||
| 5-104481-2 | TE Connectivity | SHORT POINT CONT PLTD SN RoHS : Compliant |
| 285 | ||
| 1-104481-0 | TE Connectivity | SHORT POINT CONT 15 DPLX STMPD LF RoHS : Compliant |
| 157 | ||
| 1-104482-0 | TE Connectivity | 22 SHORT PT RCPT HSG DR .100CL RoHS : Compliant |
| 0 | ||
| 104483-5 | TE Connectivity | 30 SHORT PT RCPT HSG DR .100CL RoHS : Compliant |
| 0 | ||
| 245101-04-48.00 | Amphenol RF | BNC STRAIGHT PLUG TO SMA STRAI | 0 | |||
| 5-104481-2 | TE Connectivity | SHORT POINT CONT PLTD SN RoHS : Compliant |
| 0 | ||
| 104482-9 | TE Connectivity | 20 SHORT PT RCPT HSG DR .100CL RoHS : Compliant | 0 | |||
| 104482-6 | TE Connectivity | 14 SHORT PT RCPT HSG DR .100CL RoHS : Compliant |
| 0 | ||
| 104480-8 | TE Connectivity | SHORT POINT RCP CONT LP RoHS : Not Compliant |
| 0 | ||
| 2CMA104483R1000 | Amphenol Sine Systems | ABB530C7SP INDUSTRIAL CONNECTO | 0 | |||
| 7071-0448-MF4-N-180 | Glenair Inc | 0 | ||||
| 10-448087-01H | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| 104480-7 | TE Connectivity | SHORT POINT RECP CONT LP RoHS : Not Compliant |
| 0 | ||
![]() PEI Genesis | K93-610448-22S | Amphenol Corporation |
| 0 | ||
![]() Powell Electronics | 104480-9 | TE Connectivity | SHORT POINT RECP CONT LP RoHS : Not Compliant |
| 32,059 | |
| 104480-7 | TE Connectivity | Connectors RoHS : Not Compliant |
| 25,294 | ||
| 104480-8 | TE Connectivity | SHORT POINT RCP CONT LP RoHS : Not Compliant |
| 16,765 | ||
| 104482-9 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 3,796 | ||
| 104482-7 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 3,358 | ||
| 104482-6 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 601 | ||
| 1-104482-0 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 237 | ||
| ESQ-104-48-L-D | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 100 | ||
| ESW-104-48-L-D | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 100 | ||
| ESQ-104-48-S-T-LL | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 77 | ||
| ESQ-104-48-S-S | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 53 | ||
| ESQ-104-48-L-S-LL | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 44 | ||
| 310000010448 | Honeywell Sensing and Control | Switch |
| 30 | ||
| 1-104480-4 | TE Connectivity | AMPMODU SHORT-PT CONT RoHS : Compliant |
| 19 | ||
| 1-104480-3 | TE Connectivity | AMPMODU SHORT-PT CONT RoHS : Compliant |
| 19 | ||
![]() Richardson RFPD | 245101-04-48.00 | Amphenol Corporation | Cable Assembly Coaxial 1.219m SMA to BNC M-M Bag RoHS : Compliant |
| 0 | |
| 104480-8 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Loose RoHS : Not Compliant |
| 0 | ||
| 104480-9 | TE Connectivity | Contact SKTCrimp STCable Mount 22-26AWG Loose RoHS : Not Compliant |
| 0 | ||
| 104480-7 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Loose RoHS : Not Compliant |
| 0 | ||
| SI5332FD10448-GM3 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 48-P RoHS : Compliant | 0 | |||
| 135101-04-48.00 | Amphenol Corporation | Cable Assembly RG58 1.219m SMA to SMA PL-PL Bag RoHS : Compliant |
| 0 | ||
| SI5332FD10448-GM3R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 48-P RoHS : Compliant | 0 | |||
| 104480-4 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Strip RoHS : Not Compliant |
| 0 | ||
| 135111-04-48.00 | Amphenol Corporation | Cable Assembly RG58 1.219m SMA to SMA PL-RCP Bag RoHS : Compliant |
| 0 | ||
| 1-104480-6 | TE Connectivity | Contact SKTCrimp STCable Mount 22-26AWG Loose RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 104480-2 | INSTOCK | 11,000 | |||
| 104480-4 | TE Connectivity | INSTOCK RoHS : Not Compliant | 255 | |||
| 104486 A1A 27.06.2017 | INSTOCK | 39 | ||||
| 104487 A1B 17.01.2018 | INSTOCK | 4 | ||||
![]() Avnet Abacus | 1-104480-2 | TE Connectivity | Contact MTE Socket Crimp 22 AWG Gold Plated Contacts AMPMODU Short Point Connectors (Alt: 1-104480-2) RoHS : Compliant | 15,000 | ||
| 1-104480-6 | TE Connectivity | Contact AMPMODU Short Point Socket Crimp 22 AWG Gold Plated Contacts (Alt: 1-104480-6) RoHS : Compliant | 4,000 | |||
| 104483-5 | TE Connectivity | Conn Housing RCP 30 POS 254mm Crimp ST Cable Mount (Alt: 104483-5) RoHS : Compliant | 0 | |||
| 104483-5 | TE Connectivity | Conn Housing RCP 30 POS 254mm Crimp ST Cable Mount (Alt: 104483-5) RoHS : Compliant | 0 | |||
| 104482-6 | TE Connectivity | Conn Housing RCP 14 POS 254mm Crimp ST Cable Mount (Alt: 104482-6) RoHS : Compliant | 0 | |||
| 104482-6 | TE Connectivity | Conn Housing RCP 14 POS 254mm Crimp ST Cable Mount (Alt: 104482-6) RoHS : Compliant | 0 | |||
| 104480-8 | TE Connectivity | Contact AMPMODU MTE Socket Crimp 22 AWG Gold Plated Contacts (Alt: 104480-8) RoHS : Not Compliant | 0 | |||
| 104480-8 | TE Connectivity | Contact AMPMODU MTE Socket Crimp 22 AWG Gold Plated Contacts (Alt: 104480-8) RoHS : Not Compliant | 0 | |||
| 104480-9 | TE Connectivity | Contact SKT Crimp ST Cable Mount Loose Piece (Alt: 104480-9) RoHS : Not Compliant | 0 | |||
| 104480-9 | TE Connectivity | Contact SKT Crimp ST Cable Mount Loose Piece (Alt: 104480-9) RoHS : Not Compliant | 0 | |||
| 104480-7 | TE Connectivity | Contact SKT Crimp ST Cable Mount Loose Piece (Alt: 104480-7) RoHS : Not Compliant | 0 | |||
| 1044847-1 | TE Connectivity | Conn SSMA RCP 0Hz to 18GHz 50Ohm Solder RA ThruHole Gold (Alt: 1044847-1) RoHS : Compliant | 0 | |||
| 5-104481-2 | TE Connectivity | Contact SKT Crimp ST Cable Mount Strip (Alt: 5-104481-2) RoHS : Compliant | 0 | |||
| 5-104481-2 | TE Connectivity | Contact SKT Crimp ST Cable Mount Strip (Alt: 5-104481-2) RoHS : Compliant | 0 | |||
| 245101-04-48.00 | Amphenol Corporation | RF Coaxial Cable Assembly 4ft 12m RG58 BNC Plug SMA Plug 50 ohm (Alt: 245101-04-48.00) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 1-104480-3 | TE Connectivity | (Alt: 1-104480-3) RoHS : Compliant |
| 0 | |
| 1-104481-0 | TE Connectivity | (Alt: 1-104481-0) RoHS : Compliant | 0 | |||
| 104482-3 | TE Connectivity | (Alt: 104482-3) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 104480-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,900 | |
| 1-104480-7 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,200 | ||
| 1-104481-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 800 | ||
| 104480-8 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 300 | ||
| 104480-7 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 249 | ||
| 104480-9 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 150 | ||
| 1-104481-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 75 | ||
| 104482-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 6 | ||
![]() DB Roberts | 10448 | Heyco | HSP-MDL-1-06M NATURAL | 0 | ||
| 10448F | Heyco | HSP-MDL-1-06M V-0 NATURAL | 0 | |||
| 010448P025B | Essentra Components | PAN SLOTTED SCREW, 4-48 THREAD | 0 | |||
| 010448S025 | Essentra Components | SET SCREW, SLOTTED HEAD, 4-48 | 0 | |||
| 010448F025 | Essentra Components | FILLISTER SLOTTED SCREW, 4-48 | 0 | |||
| 010448H025B | Essentra Components | 448X14 HEX HEAD MS BLK M111 | 0 | |||
| 10448F-P | Heyco | HSP-MDL-1-06M V-0 NATURAL 10PK | 0 | |||
| 010448X025 | Essentra Components | HEX SLOTTED SCREW, 4-48 THREAD | 0 | |||
| 010448H025 | Essentra Components | HEX UNSLOTTED BOLT, 4-48 THREA | 0 | |||
| 010448X025B | Essentra Components | 448X14 HEX SLOTTED BLACK M111 | 0 | |||
| 010448F025B | Essentra Components | 448 14 SLOTTED FILLISTER BLK M | 0 | |||
| 010448T031 | Essentra Components | SET SCREW, SOCKET HEAD, 4-48 T | 0 | |||
| 010448P025 | Essentra Components | PAN SLOTTED SCREW, 4-48 THREAD | 0 | |||
| 010448T025 | Essentra Components | SET SCREW, SOCKET HEAD, 4-48 T | 0 | |||
| 010448R025 | Essentra Components | ROUND SLOTTED SCREW, 4-48 THRE | 0 | |||
![]() Master Electronics | 104480-9 | TE Connectivity | SHORT POINT RECP CONT LP RoHS : Not Compliant |
| 35,619 | |
| 104482-9 | TE Connectivity | 20 SHORT PT RCPT HSG DR .100CL RoHS : Compliant |
| 5,751 | ||
| 10448 | Heyco | HSP-MDL-1-06M NATURAL RoHS : Compliant |
| 1,000 | ||
| 104482-6 | TE Connectivity | 14 SHORT PT RCPT HSG DR .100CL RoHS : Compliant |
| 911 | ||
| 610-1044-8-63 | Hirose Electric Co Ltd | Ribbon Cable Connectors Compliant with MIL-C-83503 Standard RoHS : Compliant |
| 600 | ||
| 1-104482-0 | TE Connectivity | 22 SHORT PT RCPT HSG DR .100CL RoHS : Compliant |
| 359 | ||
| 104483-5 | TE Connectivity | 30 SHORT PT RCPT HSG DR .100CL RoHS : Compliant |
| 144 | ||
| 245101-04-48.00 | Amphenol RF | RF Cable Assembly - BNC Straight Plug to SMA Straight Plug on RG-58 cable - 4 feet RoHS : Compliant |
| 48 | ||
| AA1-X0-10-448-431-P | Carling Technologies | Circuit Breaker A-Series Hydraulic-Magnetic | Carling Technologies AA1-X0-10-448-431-P RoHS : Compliant |
| 0 | ||
| ESQ-104-48-G-D-LL | Samtec Inc | Conn Board Stacker RCP 8 POS 2.54mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| ESQ-104-48-S-T-LL | Samtec Inc | .100 PC/104™ Elevated Socket Strip RoHS : Compliant |
| 0 | ||
| ESQ-104-48-S-D-LL | Samtec Inc | Conn Board Stacker RCP 8 POS 2.54mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| ESW-104-48-G-D-LL | Samtec Inc | Conn Board Stacker RCP 8 POS 2.54mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| ESQ-104-48-S-S | Samtec Inc | .100 PC/104™ Elevated Socket Strip RoHS : Compliant |
| 0 | ||
| ESQ-104-48-L-S-LL | Samtec Inc | .100 PC/104™ Elevated Socket Strip RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 102010448 | Seeed Development Ltd | Bluetooth Development Tools - 802.15.1 XIAO nRF52840 Arduino / MicroPython - Bluetooth5.0 |
| 50 | |
![]() Pasternack Enterprises US | PE3C0104-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMA Male Right Angle With Times Connectors Cable 48 Inch Length Using LMR-240 Coax., Radio frequency assembly SMA male to SMA male right angle with times connectors cable 48 inch length using LMR-240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA male right angle with times connectors cable 48 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C0104-48, can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C0104-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0104-48 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle with times connectors cable 48 inch length using LMR-240 coax. |
| 2,759 | |
| PE3W04104-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to N Female Bulkhead Low Loss Cable 48 Inch Length Using LMR-240 Coax with Times Microwave Components., Pasternack’s PE3W04104-48 low loss SMA male to type N female bulkhead RF cable assembly using LMR-240 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to type N female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with an SMA cable connection on one end and a type N bulkhead cable connection on the other. Our SMA to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W04104-48 can also be known as a low loss SMA plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04104-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to bulkhead type N female cable has a maximum VSWR of 1.4:1. This PE3W04104-48 SMA plug to type N jack cable assembly is built with LMR-240, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W04104-48 can also be used in the other direction and will be a type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. This low loss SMA plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 37 | ||
| PE3TC0104-48 | Pasternack Enterprises | Key Specifications (Click on Data Sheet Above for Additional Details). Connector Series 1 N Connector Gender 1 Male Connector Polarity 1 Standard Connector Angle 1 Straight Connector Mount Method 1 None Connector Impedance 1 50 Ohm Connector Series 2 N Connector Gender 2 Female Connector Polarity 2 Standard Connector Angle 2 Straight Connector Mount Method 2 None Connector Impedance 2 50 Ohm RF Cable Part Number PE-80TEST RF Cable Type PE-TC195 RF Cable Impedance 50 Ohm Length 48 inches . PE-TC195 Series Phase Stable Test Cable N Male to N Female to 18 GHz 48 Inch Length. , Radio frequency assembly PE-TC195 series phase stable test cable N male to N female to 18 GHz 48 inch length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. PE-TC195 series phase stable test cable N male to N female to 18 GHz 48 inch length, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our precision type N to N type cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3TC0104-48, can also be known as a precision type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3TC0104-48 is built with PE-TC195 which is a formable coax type. The Pasternack formable N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N male to N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3TC0104-48 can also be used in the other direction and will be type N female to type N male cable assembly if the opposite connectivity is required. Precision type N plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this PE-TC195 series phase stable test cable N male to N female to 18 GHz 48 inch length. |
| 1 | ||
| PE3C10448 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 2.92mm Female Bulkhead to 1.85mm Male Cable Using RG405 Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 1.85mm male cable using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 1.85mm male cable using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a 1.85mm cable connection on the other. Our 2.92mm to 1.85mm cable assembly has a female gender on end 1 and a male on end 2. PE3C10448 can also be known as a 2.92mm jack to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. 2.92mm jack to 1.85mm plug cable assembly PE3C10448 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method, while the other has the clamp/solder attachment method and a stainless steel body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10448 can also be used in the other direction and will be a 1.85mm male to 2.92mm female bulkhead cable assembly if the opposite connectivity is required. 2.92mm jack bulkhead to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 1.85mm RF cable assembly as per your requirements. | 0 | |||
| PE3C10448-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Female Bulkhead to 1.85mm Male Cable 24 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 1.85mm male cable 24 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 1.85mm male cable 24 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a 1.85mm cable connection on the other. Our 2.92mm to 1.85mm cable assembly has a female gender on end 1 and a male on end 2. PE3C10448-24 can also be known as a 2.92mm jack to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. 2.92mm jack to 1.85mm plug cable assembly PE3C10448-24 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method, while the other has the clamp/solder attachment method and a stainless steel body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10448-24 can also be used in the other direction and will be a 1.85mm male to 2.92mm female bulkhead cable assembly if the opposite connectivity is required. 2.92mm jack bulkhead to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 1.85mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10448-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Female Bulkhead to 1.85mm Male Cable 6 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 1.85mm male cable 6 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 1.85mm male cable 6 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a 1.85mm cable connection on the other. Our 2.92mm to 1.85mm cable assembly has a female gender on end 1 and a male on end 2. PE3C10448-6 can also be known as a 2.92mm jack to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. 2.92mm jack to 1.85mm plug cable assembly PE3C10448-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method, while the other has the clamp/solder attachment method and a stainless steel body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10448-6 can also be used in the other direction and will be a 1.85mm male to 2.92mm female bulkhead cable assembly if the opposite connectivity is required. 2.92mm jack bulkhead to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 1.85mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10448-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Female Bulkhead to 1.85mm Male Cable 18 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 1.85mm male cable 18 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 1.85mm male cable 18 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a 1.85mm cable connection on the other. Our 2.92mm to 1.85mm cable assembly has a female gender on end 1 and a male on end 2. PE3C10448-18 can also be known as a 2.92mm jack to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. 2.92mm jack to 1.85mm plug cable assembly PE3C10448-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method, while the other has the clamp/solder attachment method and a stainless steel body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10448-18 can also be used in the other direction and will be a 1.85mm male to 2.92mm female bulkhead cable assembly if the opposite connectivity is required. 2.92mm jack bulkhead to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 1.85mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10448-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.92mm Female Bulkhead to 1.85mm Male Cable 36 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 1.85mm male cable 36 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 1.85mm male cable 36 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a 1.85mm cable connection on the other. Our 2.92mm to 1.85mm cable assembly has a female gender on end 1 and a male on end 2. PE3C10448-36 can also be known as a 2.92mm jack to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. 2.92mm jack to 1.85mm plug cable assembly PE3C10448-36 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method, while the other has the clamp/solder attachment method and a stainless steel body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10448-36 can also be used in the other direction and will be a 1.85mm male to 2.92mm female bulkhead cable assembly if the opposite connectivity is required. 2.92mm jack bulkhead to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 1.85mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10448 | Pasternack Enterprises | Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FME, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. 10-32 Male to FME Jack Cable Using LMR-100 Coax. PE3W10448 is a 10-32 male to FME jack cable using LMR-100A coax. This Pasternack 10-32 male to FME jack cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm FME for connector 2. Our male 10-32 to jack FME cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10448 10-32 male to FME jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C10448-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Female Bulkhead to 1.85mm Male Cable 12 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 1.85mm male cable 12 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 1.85mm male cable 12 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a 1.85mm cable connection on the other. Our 2.92mm to 1.85mm cable assembly has a female gender on end 1 and a male on end 2. PE3C10448-12 can also be known as a 2.92mm jack to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. 2.92mm jack to 1.85mm plug cable assembly PE3C10448-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method, while the other has the clamp/solder attachment method and a stainless steel body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10448-12 can also be used in the other direction and will be a 1.85mm male to 2.92mm female bulkhead cable assembly if the opposite connectivity is required. 2.92mm jack bulkhead to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 1.85mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3104-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 48 inches. SC Male to SC Male Cable 48 Inch Length Using RG58 Coax., Radio frequency assembly SC male to SC male cable 48 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SC male to SC male cable 48 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SC to SC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SC cable connection on one end and SC cable connection on the other. Our SC to SC cable assemblies have a male gender on end 1 and male on end 2. This SC to SC cable is a male to male coax assembly, PE3104-48, can also be known as a SC plug to SC plug cable assembly and will be shipped same-day as it is purchased. SC plug to SC plug cable assembly PE3104-48 is built with RG58 which is a flexible coax type. The Pasternack flexible SC cable assembly is manufactured with SC to SC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SC male to SC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SC plug to SC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SC to SC cable assembly for quick shipment worldwide. Variations of SC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SC male to SC male cable 48 inch length using RG58 coax. |
| 0 | ||
![]() Vyrian | 1-104482-7 | TE Connectivity | Board Connector, 38 Contact(s), 2 Row(s), Female, 0.1 inch Pitch, Crimp Terminal, Black Insulator, Receptacle RoHS : Compliant | 10,910 | ||
| 1-104480-2 | TE Connectivity | Connector Accessory, 0.025in Min Cable Dia, 0.06in Max Cable Dia, Contact, Copper Alloy RoHS : Compliant | 10,533 | |||
| SN104488FNHR | Texas Instruments | 8,964 | ||||
| 1044847-1 | TE Connectivity | RF SSMA Connector, Female, Board Mount, Solder Terminal, Jack RoHS : Compliant | 8,925 | |||
| SN104482DR | Texas Instruments | 7,743 | ||||
| SN104485DR | Texas Instruments | 4,679 | ||||
| 135111-04-48.00 | Amphenol Corporation | Interconnection Device RoHS : Compliant | 809 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |