 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
1044 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Onlinecomponents.com | MRME-1044 | Coto Technology USA | RoHS : Compliant |
| 1 | |
| 1044S | Middle Atlantic Products | ABANDON PLT ASSY 3 1/2IN RoHS : Compliant |
| 0 | ||
| 84641-1044 | Molex | RoHS : Compliant |
| 0 | ||
| 121537-1044 | ITT Interconnect Solutions | Conn Circular 1 POS Crimp ST Box Mount 1 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 132039-1044 | ITT Interconnect Solutions | Circular Plastic Push Pull Straight Plug w/Cable Gray 7 Pin 5 A PLA Series | ITT Cannon PLA1G023J07 RoHS : Compliant |
| 0 | ||
| 155561-1044 | ITT Interconnect Solutions |
| 0 | |||
| 155521-1044 | ITT Interconnect Solutions | Connector Miniature Circular PIN 4 Position Crimp Straight Cable Mount 4 Terminal 1 Port |
| 0 | ||
| 32-1044 | AIM-Cambridge | Conn Modular Adapter PL/F/F/F 4/12 POS T Style 1 Port Bulk RoHS : Compliant |
| 0 | ||
| 515-1044 | Dialight | Optopipe Optical Light Pipe, Illuminated Corner |
| 0 | ||
| 98267-1044 | Molex | 1.00mm Pitch Premo-Flex™ FFC Jumper, Opposite Side Contacts (Type D), 33 Circuits, 0.203m Cable Length, 0.22mm Cable Thickness, Tin(Sn) Plating RoHS : Compliant |
| 0 | ||
| 84657-1044 | Molex | RoHS : Compliant |
| 0 | ||
| 84636-1044 | Molex | RoHS : Compliant |
| 0 | ||
| 096516-1044 | ITT Interconnect Solutions | Cable Assy D-mic-d 25P 914.4MM |
| 0 | ||
| 70287-1044 | Molex | 2.54mm Pitch C-Grid® Header, Breakaway, Dual Row, Vertical, with Retention Pin, 92 Circuits, 6.10mm Mating Pin Length, Tin (Sn) Plating RoHS : Compliant |
| 0 | ||
| 42227-1044 | Molex | Conn Wire to Board HDR 9 POS 2.54mm Solder ST Thru-Hole Bag RoHS : Compliant |
| 0 | ||
 Verical | 104479-4 | TE Connectivity | Contact SKT Crimp ST Cable Mount 20-24AWG Reel RoHS : Not Compliant |
| 52,500 | |
| 104479-9 | TE Connectivity | Contact SKT Crimp ST Cable Mount 20-24AWG Reel RoHS : Compliant |
| 32,085 | ||
| 104479-9 | TE Connectivity | Contact SKT Crimp ST Cable Mount 20-24AWG Reel RoHS : Compliant |
| 27,500 | ||
| 104479-9 | TE Connectivity | Contact SKT Crimp ST Cable Mount 20-24AWG Reel RoHS : Compliant |
| 15,000 | ||
| 104479-2 | TE Connectivity | Contact SKT Crimp ST Cable Mount 20-24AWG Reel RoHS : Not Compliant |
| 15,000 | ||
| 10447-C | Approved Technology | 10447-C |
| 5,200 | ||
| 10449-C | Approved Technology | 10449-C |
| 4,463 | ||
| 10442-C | Approved Technology | 10442-C |
| 4,207 | ||
| 10448 | Heyco | 10448 |
| 1,000 | ||
| 1044423 | Phoenix Contact | Conn Fuse Modular Terminal Block 2 POS 6.2mm Screw DIN Rail 30A RoHS : Exempt |
| 100 | ||
| 1044423 | Phoenix Contact | Conn Fuse Modular Terminal Block 2 POS 6.2mm Screw DIN Rail 30A RoHS : Exempt |
| 97 | ||
| 1044 | Keystone Electronics Corp | Battery Holder 1 Cells Nylon Tray RoHS : Compliant |
| 42 | ||
| 10446 | Desco Industries Inc | Chemical-ESD Surface Cleaner Liquid Transparent Violet 4Oz-Bottle |
| 30 | ||
| 10443 | Desco Industries Inc | Cleaner Spray Clear Violet Bottle 41°C RoHS : Compliant |
| 20 | ||
| 10445 | Desco Industries Inc | Cleaner Liquid Clear Violet Bag in Box 41°C RoHS : Compliant |
| 2 | ||
 Avnet Americas | 1-104480-2 | TE Connectivity | Contact, MTE, Socket, Crimp, 22 AWG, Gold Plated Contacts, AMPMODU Short Point Connectors - Tape and Reel (Alt: 1-104480-2) RoHS : Compliant |
| 210,000 | |
| 1-104480-7 | TE Connectivity | Contact, MTE, Socket, Crimp, 22 AWG, Tin Plated Contacts, AMPMODU Short Point Series Connectors - Tape and Reel (Alt: 1-104480-7) RoHS : Compliant |
| 105,000 | ||
| 1-104480-3 | TE Connectivity | - Tape and Reel (Alt: 1-104480-3) RoHS : Compliant |
| 74,598 | ||
| 104480-9 | TE Connectivity | - Bag (Alt: 104480-9) RoHS : Not Compliant |
| 46,000 | ||
| 1-104480-4 | TE Connectivity | Contact, AMPMODU Short Point, Socket, Crimp, 22 AWG, Tin Plated Contacts - Bag (Alt: 1-104480-4) RoHS : Compliant |
| 40,220 | ||
| 104479-9 | TE Connectivity | - Tape and Reel (Alt: 104479-9) RoHS : Compliant |
| 30,000 | ||
| 1-104481-1 | TE Connectivity | - Tape and Reel (Alt: 1-104481-1) RoHS : Compliant |
| 15,000 | ||
| 54104-4031 | Molex | FFC / FPC Board Connector, 40 Contacts, 1 Row, 0.5mm, Top, Gold, SMT, Right Angle, 0.3mm, Solder - Tape and Reel (Alt: 0541044031) RoHS : Compliant |
| 7,500 | ||
| 87831-0441 | Molex | Pin Header, 4 Contacts, 2 Rows, 2mm, Gold, 2A, Straight, Shrouded, Phosphor Bronze, THT - Rail/Tube (Alt: 0878310441) RoHS : Compliant |
| 7,100 | ||
| TJA1044BT/0Z | NXP Semiconductors | CAN FD Transceiver, 1 TX, 1 RX, 4.5 V to 5.5 V, 8 Pins, SOIC - Tape and Reel (Alt: TJA1044BT/0Z) RoHS : Compliant |
| 5,000 | ||
| 2316104-4 | TE Connectivity | Connector Housing Unsealed Wire to Board Receptacle 4-Position 2mm Straight Cable Mount Box - Boxed Product (Development Kits) (Alt: 2316104-4) RoHS : Not Compliant |
| 4,984 | ||
| 104481-8 | TE Connectivity | - Bag (Alt: 104481-8) RoHS : Not Compliant |
| 3,145 | ||
| 61083-104400LF | Amphenol Corporation | - Rail/Tube (Alt: 61083-104400LF) RoHS : Compliant |
| 499 | ||
| 104482-5 | TE Connectivity | - Bulk (Alt: 104482-5) RoHS : Compliant |
| 136 | ||
| 440HS072NF1104-4KP | Glenair Inc | - Bulk (Alt: 440HS072NF1104-4KP) RoHS : Not Compliant |
| 8 | ||
 Mouser Electronics | 104479-8 | TE Connectivity | Headers & Wire Housings SKT 24-20 CU/SN Reel of 15000 RoHS : Compliant |
| 120,000 | |
| 1-104479-1 | TE Connectivity | Headers & Wire Housings CONTACT TIN 24-20AWG RoHS : Compliant |
| 70,037 | ||
| 104479-9 | TE Connectivity | Headers & Wire Housings SKT 24-20 CU/AU Reel of 15000 RoHS : Compliant |
| 30,000 | ||
| 104479-8 | TE Connectivity | Headers & Wire Housings SKT 24-20 CU/SN Reel of 1000 RoHS : Compliant |
| 28,000 | ||
| 1-104479-2 | TE Connectivity | Headers & Wire Housings CONTACT GLD 24-20AWG RoHS : Compliant |
| 22,495 | ||
| 104422-1 | TE Connectivity | Headers & Wire Housings 16P DUAL ROW HSNG. RoHS : Compliant |
| 19,850 | ||
| 104479-8 | TE Connectivity | Headers & Wire Housings SKT 24-20 CU/SN Cut Strip of 100 RoHS : Compliant |
| 15,400 | ||
| 104482-1 | TE Connectivity | Headers & Wire Housings CONN HOUSING 4 POS NON-POLARIZED RoHS : Compliant |
| 2,375 | ||
| 104482-6 | TE Connectivity | Headers & Wire Housings CONN HOUSING 14 POS NON-POLARIZED RoHS : Compliant |
| 2,082 | ||
| 104422-2 | TE Connectivity | Headers & Wire Housings 20P DUAL ROW HSNG RoHS : Compliant |
| 1,541 | ||
| 104482-8 | TE Connectivity | Headers & Wire Housings CONN HOUSING 18 POS NON-POLARIZED RoHS : Compliant |
| 1,148 | ||
| 104483-8 | TE Connectivity | Headers & Wire Housings CONN HOUSING 64 POS POLARIZED RoHS : Compliant |
| 692 | ||
| 1044 | Keystone Electronics Corp | Cylindrical Battery Contacts, Clips, Holders & Springs 18650 SOLDER TAIL BATTERY HOLDER RoHS : Compliant |
| 222 | ||
| 1044024 | Phoenix Contact | Managed Ethernet Switches FL SWITCH 2208 PN RoHS : Compliant |
| 4 | ||
| HLCD-10-01.72-TD-TH-1 | Samtec Inc | Rectangular Cable Assemblies High Speed Hermaphroditic Cable |
| 0 | ||
 Arrow Electronics | 104479-9 | TE Connectivity | Contact SKT Crimp ST Cable Mount 20-24AWG Reel RoHS : Compliant |
| 60,000 | |
| 104479-4 | TE Connectivity | Contact SKT Crimp ST Cable Mount 20-24AWG Reel RoHS : Not Compliant |
| 57,489 | ||
| 104479-3 | TE Connectivity | Contact SKT Crimp ST Cable Mount 20-24AWG Reel RoHS : Not Compliant |
| 39,253 | ||
| 104479-9 | TE Connectivity | Contact SKT Crimp ST Cable Mount 20-24AWG Reel RoHS : Compliant |
| 32,085 | ||
| 104479-3 | TE Connectivity | Contact SKT Crimp ST Cable Mount 20-24AWG Reel RoHS : Not Compliant |
| 30,000 | ||
| 104479-9 | TE Connectivity | Contact SKT Crimp ST Cable Mount 20-24AWG Reel RoHS : Compliant |
| 15,000 | ||
| 104479-2 | TE Connectivity | Contact SKT Crimp ST Cable Mount 20-24AWG Reel RoHS : Not Compliant |
| 14,470 | ||
| 104483-9 | TE Connectivity | Conn Housing RCP 14 POS 2.54mm Crimp ST Cable Mount Black Package RoHS : Compliant |
| 2,261 | ||
| 104422-1 | TE Connectivity | Conn Housing RCP 16 POS 2.54mm Crimp ST Cable Mount Black Bag RoHS : Compliant |
| 1,920 | ||
| 104480-8 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Loose RoHS : Not Compliant |
| 470 | ||
| 104480-8 | TE Connectivity | Contact SKT Crimp ST Cable Mount 22-26AWG Loose RoHS : Not Compliant |
| 305 | ||
| 1044423 | Phoenix Contact | Conn Fuse Modular Terminal Block 2 POS 6.2mm Screw DIN Rail 30A RoHS : Exempt |
| 100 | ||
| 104-40015 | ept Connectors | Conn DIN 41612 F 32 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 25 | ||
| 10443 | Desco Industries Inc | Cleaner Spray Clear Violet Bottle 41°C RoHS : Compliant |
| 20 | ||
| 10445 | Desco Industries Inc | Cleaner Liquid Clear Violet Bag in Box 41°C RoHS : Compliant |
| 2 | ||
 Newark | BG125-03-A-1-1-0440-N-D | Global Connector Technology | Connector, Rcpt, 3Pos, 1Row, 2.54Mm; |Gct BG125-03-A-1-1-0440-N-D RoHS : Compliant |
| 1,091 | |
| 110-44-324-41-001000 | Mill-Max Mfg Corp | Ic & Component Socket, 24Cont; |Mill-Max 110-44-324-41-001000 RoHS : Compliant |
| 417 | ||
| 160X10449X | Amphenol CONEC | Dust Cap, Rcpt, Polypropylene; |Amphenol Conec 160X10449X RoHS : Compliant |
| 249 | ||
| 221958-1044 | Molex | Cable Assy, 4P Rcpt-Rcpt, 600Mm; |Molex 221958-1044 RoHS : Compliant |
| 218 | ||
| 64.1044-24 | Stäubli Electrical Connectors | Banana Conn, Plug, 32A, 60Vdc, White; |Staubli 64.1044-24 RoHS : Compliant |
| 167 | ||
| 74982104400 | Wurth Elektronik | Rj45 Conn, R/A Jack, 8P8C, 1Port, Th; |Würth Elektronik 74982104400 RoHS : Compliant |
| 110 | ||
| 221958-1044 | Molex | Cable Assy, 4P Rcpt-Rcpt, 600Mm; Connector To Connector:Clik-Mate Receptacle To Clik-Mate Receptacle; No. Of Positions:4Positions; Connector Pitch:2Mm; No. Of Rows:1 Row; Cable Length - Metric:600Mm; Cable Length - Imperial:23.6" Rohs Compliant: Yes RoHS : Compliant |
| 81 | ||
| 104455 | Brady Worldwide Inc | B514 4X10 Green Floor Ls 20/Pk/ Pack; |Brady 104455 RoHS : Not Compliant |
| 20 | ||
| 104462 | Brady Worldwide Inc | B514 4X10 Blue Floor Ts 20/Pk/ Pack; |Brady 104462 RoHS : Not Compliant |
| 13 | ||
| 901-11044 | HellermannTyton | Cable Marker, Pre Printed, Pvc, White; |Hellermanntyton 901-11044 RoHS : Compliant |
| 9 | ||
| 104497 | Brady Worldwide Inc | B534Fs 14X18 Rd, bk/Wt Do Not Enter W/Sym; |Brady 104497 RoHS : Not Compliant |
| 5 | ||
| 10442000 | Lapp Group | Heavy Duty Conn, 1 Lever, Size 10A; Heavy Duty Connector Type:Base, Panel Mount; Connector Body Material:Aluminum Alloy Body; Locking Type:1 Lever; Rectangular Shell Size:10A; Product Range:Epic H-A Series Rohs Compliant: Yes |Lapp 10442000 RoHS : Compliant |
| 4 | ||
| 2110-440-AL | RAF Electronic Hardware | Standoff, Hex Female-Female, 22.23Mm; |Raf Electronic Hardware 2110-440-AL RoHS : Compliant |
| 4 | ||
| FMWCA1044 | Fairview Microwave Inc | Wr-112 To Sma Female Waveguide To Coax A; |Fairview Microwave FMWCA1044 RoHS : Not Compliant |
| 3 | ||
| 1044 | Keystone Electronics Corp | Batt Holder, 18650X1, Pcb; |Keystone 1044 RoHS : Compliant |
| 0 | ||
 Analog Devices Inc | MAX1044EPA+ | Analog Devices Inc | Switched-Capacitor Voltage Con RoHS : Compliant |
| 3,591 | |
| LTC1044AIS8#TRPBF | Analog Devices Inc | 12V CMOS V Conv RoHS : Compliant |
| 3,164 | ||
| LTC1044ACS8#TRPBF | Analog Devices Inc | 12V CMOS V Conv RoHS : Compliant |
| 2,606 | ||
| LTC1044ACN8#PBF | Analog Devices Inc | 12V CMOS V Conv RoHS : Compliant |
| 2,604 | ||
| LTC1044AIN8#PBF | Analog Devices Inc | 12V CMOS V Conv RoHS : Compliant |
| 1,400 | ||
| MAX1044CPA+ | Analog Devices Inc | Switched-Capacitor Voltage Con RoHS : Compliant |
| 1,389 | ||
| LTC1044ACS8#PBF | Analog Devices Inc | 12V CMOS V Conv RoHS : Compliant |
| 729 | ||
| MAX1044CSA+T | Analog Devices Inc | Switched-Capacitor Voltage Con RoHS : Compliant |
| 507 | ||
| MAX11044ECB+ | Analog Devices Inc | 4-/6-/8-Channel, 16-/14-Bit, S RoHS : Compliant |
| 0 | ||
| LTC1044CS8#TRPBF | Analog Devices Inc | Switched Cap V Conv RoHS : Compliant |
| 0 | ||
| LTC1044CS8#PBF | Analog Devices Inc | Switched Cap V Conv RoHS : Compliant |
| 0 | ||
| MAX11044ETN+ | Analog Devices Inc | 4-/6-/8-Channel, 16-Bit, Simul RoHS : Compliant |
| 0 | ||
| MAX11044ETN+T | Analog Devices Inc | 4-/6-/8-Channel, 16-/14-Bit, S RoHS : Compliant |
| 0 | ||
| MAX1044MJA/883B | Analog Devices Inc | Switched-Capacitor Voltage Con RoHS : Not Compliant | 0 | |||
| MAX1044MJA | Analog Devices Inc | Switched-Capacitor Voltage Con RoHS : Not Compliant | 0 | |||
 NXP Semiconductors | TJA1044GT/3Z | NXP Semiconductors | High-speed CAN transceiver with Standby mode, Reel 13" Q1/T1 in Sulfur Barrier Bag RoHS : Compliant |
| 15,158 | |
| TJA1044GTK/3Z | NXP Semiconductors | High-speed CAN transceiver with Standby mode, Reel 13" Q1/T1 in Sulfur Barrier Bag RoHS : Compliant |
| 11,800 | ||
| TJA1044GT/1Z | NXP Semiconductors | High-speed CAN transceiver with Standby mode, Reel 13" Q1/T1 in Sulfur Barrier Bag RoHS : Compliant |
| 47,384 | ||
| TJA1044DT/0Z | NXP Semiconductors | VeLIO Certified, High-Speed CAN Transceivers with Standby Mode, Reel 13" Q1/T1 in Sulfur Barrier Bag RoHS : Compliant |
| 42,944 | ||
| TJA1044ET/0Z | NXP Semiconductors | VeLIO Certified, High-Speed CAN Transceivers with Standby Mode, Reel 13" Q1/T1 in Sulfur Barrier Bag RoHS : Compliant |
| 0 | ||
| TJA1044CT/0Z | NXP Semiconductors | High-speed CAN transceiver with Standby mode, Reel 13" Q1/T1 in Sulfur Barrier Bag RoHS : Compliant |
| 1,716 | ||
| TJA1044BT/0Z | NXP Semiconductors | High-speed CAN transceiver with Standby mode, Reel 13" Q1/T1 in Sulfur Barrier Bag RoHS : Compliant |
| 46,328 | ||
| TJA1044BTK/0J | NXP Semiconductors | High-speed CAN transceiver with Standby mode, Reel 13" Q1/T1 RoHS : Compliant |
| 0 | ||
| TJA1044ETK/0J | NXP Semiconductors | VeLIO Certified, High-Speed CAN Transceivers with Standby Mode, Reel 13" Q1/T1 RoHS : Compliant |
| 0 | ||
| TJA1044DTK/0J | NXP Semiconductors | VeLIO Certified, High-Speed CAN Transceivers with Standby Mode, Reel 13" Q1/T1 RoHS : Compliant |
| 46,020 | ||
| TJA1044CTK/0J | NXP Semiconductors | High-speed CAN transceiver with Standby mode, Reel 13" Q1/T1 RoHS : Compliant |
| 3,448 | ||
TJA1044GTKZ | NXP Semiconductors | High-speed CAN transceiver with Standby mode, Reel 13" Q1/T1 in Sulfur Barrier Bag RoHS : Compliant |
| 22,570 | ||
| TJA1044VTZ | NXP Semiconductors | VeLIO Certified, High-Speed CAN Transceivers with Standby Mode, Reel 13" Q1/T1 in Sulfur Barrier Bag RoHS : Compliant |
| 24,624 | ||
 RS | 1044 | RACO | KNOCKOUT SEAL, 1 INCH, SNAP-IN DESIGN, ZINC STEEL |
| 119 | |
| 66261121044 | Norton Winter | BLUEFIRE QUICK-CHANGE CLOTH DISC TYPE III 80 GRIT R884P ZA, 1-1/2 IN. |
| 100 | ||
| 1044 | Keystone Electronics Corp | BATTERY HOLDER, SOLDER MOUNT, 1 CELL, CELL SIZE 18650, NYLON 6/6, UL94V-0 |
| 93 | ||
| 10442000 | Lapp Group | PANEL MOUNT BASE RoHS : Compliant |
| 74 | ||
| 93601-0445 | Woodhead Molex | HEAVY DUTY CONNECTOR, GWCONNECT, 32X13 SQD8/0 FEMALE INSERT CRIMP 8P 16A 500V |
| 50 | ||
| RK10 (445062710) | OMRON Industrial Automation | SWITCH PART, 10M ROPE KIT, STAINLESS STEEL, FITS STI ER ROPE SWITCHES |
| 10 | ||
| 2451212 (25531044) (MPRI-1001500-100RS) | RS Pro | SCREW, #10-24 X 1 1/2 PHILLIPS ROUND MACHINE, ZINC PLATED |
| 5 | ||
| 2451044 (25531184) (MPFI-1200500-100RS) | RS Pro | SCREW, #12-24 X 1/2 PHILLIPS FLAT MACHINE, ZINC PLATED |
| 5 | ||
| 52104456 (6644502) | Lapp Group | ENLARGERS, SKINDICHT ME-M, M25, M32, NBR, METALLIC |
| 4 | ||
| 1104482 | RS Pro | THERMOCOUPLE TYPE K 6.56 FT (2M) 500F (260C) MAX 1/0.2 STRANDING 22AWG |
| 3 | ||
| CM-S11PC10 (445361110) | OMRON Industrial Automation | SWITCH PLASTIC SWITCH AND ACTUATOR 10M CABLE, CM SERIES |
| 3 | ||
| SHC1044CR | Hubbell Wiring Device-Kellems | CORD CONNECTOR, STRAIGHT MALE, 1.00-1.13", NYLON, GRAY, STANDARD DUTY SERIES |
| 2 | ||
| 104460 | Lapp Group | RECTANGULAR POWER HOOD THERMOPLASTIC RESIN 1&FRASL 2 IN. NPT -40 TO +125 &DEG |
| 1 | ||
| 120066-1044 (885030K03M150) | Woodhead Molex | DOUBLE-ENDED, 5 POLE, M12 MALE TO FEMALE, 18 AWG, TPE, 15 M, 120066 SERIES |
| 1 | ||
| E510-440-H3-U (JNE510-440-H3-U) | TECO-Westinghouse Motor Company | VFD DRIVE,3-PH 460V IN,460V 3-PH OUT, NEMA 1,6 DI/2 DO/2 AI/1 AO WITH LOGIC |
| 1 | ||
 Microchip Technology Inc | TC1044SEPA | Microchip Technology Inc | High Volt DC-DC Conv, PDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 680 | |
| TC1044SCPA | Microchip Technology Inc | High Volt DC-DC Conv, PDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 13 | ||
| TC1044SIJA | Microchip Technology Inc | High Volt DC-DC Conv, CERDIP, Projected EOL: 2028-05-16 - Contact for Pricing RoHS : Compliant | 0 | |||
| TC1044SDWF | Microchip Technology Inc | N/A, WAFER, Projected EOL: 2036-01-14 - Contact for Pricing RoHS : Compliant | 0 | |||
| MV21010-44 | Microchip Technology Inc | GaAs TVAR Hermetic Pill, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
TC1044SCOA | Microchip Technology Inc | High Volt DC-DC Conv, SOIC, Projected EOL: 2036-05-16 RoHS : Compliant |
| 0 | ||
| TC1044SEOA | Microchip Technology Inc | High Volt DC-DC Conv, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
| TC1044SCOA713 | Microchip Technology Inc | High Volt DC-DC Conv, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
| TC1044SEOA713 | Microchip Technology Inc | High Volt DC-DC Conv, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
| 5962-2221044QZC | Microchip Technology Inc | RTPF500ZT-1LG1509E, Projected EOL: 2051-06-23 - Contact for Pricing | 0 | |||
| MIC2810-44MYML-TR | Microchip Technology Inc | DC-DC + 2 Linear Regulators with LowQ, Mode and POR, VQFN, Projected EOL: 2035-10-24 - Contact for Pricing RoHS : Compliant | 0 | |||
DSC1033DI1-044.2368-2.50-mm-x-2.00-mm.jpg) | Microchip Technology Inc | MEMS OSC, LVCMOS, 44.2368MHz, 50PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2028-10-19 - Contact for Pricing RoHS : Compliant | 0 | |||
| DSC1001DI1-044.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 44MHz, 50PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2051-05-11 RoHS : Compliant |
| 0 | ||
| DSC1033DI1-044.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 44MHz, 50PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2028-10-07 - Contact for Pricing RoHS : Compliant | 0 | |||
| DSC1001DI1-044.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 44MHz, 50PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2051-05-11 RoHS : Compliant |
| 0 | ||
 Bisco Industries | MS21044N5 | MS Nuts | 4,208 | |||
| MS21044N5 | Abbott-Interfast Corporation | 3,932 | ||||
| 010440P125 | Micro Plastics Inc | 988 | ||||
| 010440F062 | Micro Plastics Inc | 615 | ||||
| E6-10-440R-50 | Southco | 600 | ||||
| 010440P087 | Micro Plastics Inc | 490 | ||||
| AL6941-0440-0.500-12 | Lyn-Tron Inc | 200 | ||||
| 010440P050 | Micro Plastics Inc | 195 | ||||
| BR6941-0440-0.687-34 | Lyn-Tron Inc | 170 | ||||
| 10-448-1-05 | NEW SURPLUS CELL 2 | 119 | ||||
| 15R-104-4-05 | Staffall | 99 | ||||
| 110-44-636-41-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 10 | |||
| 09-9136-1-04419 | Staffall | 7 | ||||
| 110-44-310-41-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 5 | |||
| AL6941-0440-0.437-00 | Lyn-Tron Inc | 2 | ||||
 Future Electronics | 1044 | Keystone Electronics Corp | RoHS : Compliant |
| 0 | |
 Rochester Electronics | TJA1044GTK/3Z | NXP Semiconductors | IC INTERFACE Transceiver CAN 5Mbps 4.5V - 5.5V 8-SON T/R RoHS : Compliant |
| 95,000 | |
| TJA1044VT/3Z | NXP Semiconductors | 1-Trnsvr, PDSO8 RoHS : Compliant |
| 136 | ||
| NB3N51044DTG | onsemi | NB3N51044 - Processor Specific Clock Generator, CMOS, PDSO28 RoHS : Compliant |
| 3,650 | ||
| 2SC4104-4-TB-E | onsemi | Bipolar NPN Transistor, 50MA 60V RoHS : Compliant |
| 12,000 | ||
| LTC1044ACS8#PBF | Analog Devices Inc | IC VOLT REG Fixed Ratiometric Charge Pump 1 OUT -Vin, 2Vin, Vin/2 8-SOIC Tube RoHS : Compliant |
| 57 | ||
| LTC1044CN8#PBF | Analog Devices Inc | IC VOLT REG Fixed Ratiometric Charge Pump 1 OUT -Vin, 2Vin, Vin/2 8-DIP Tube RoHS : Compliant |
| 63 | ||
| SN104401P | Texas Instruments | ANALOG AMPLIFIERS RoHS : Not Compliant |
| 2,988 | ||
| LTC1044CDR | Texas Instruments | Switched Capacitor Converter, 5kHz Switching Freq-Max, CMOS, PDSO8 RoHS : Not Compliant |
| 6,800 | ||
| SN104436N | Texas Instruments | ANALOG INTERFACE RoHS : Not Compliant |
| 9,654 | ||
| DS1044R-25 | Maxim Integrated Products | Silicon Delay Line, 4-Func, 1-Tap, True Output, CMOS, PDSO14 RoHS : Not Compliant |
| 11,589 | ||
DS1044R-25+ | Maxim Integrated Products | Silicon Delay Line, 4-Func, 1-Tap, True Output, CMOS, PDSO14 RoHS : Compliant |
| 14,522 | ||
| DS1044R-25+T&R | Maxim Integrated Products | Silicon Delay Line, 4-Func, 1-Tap, True Output, CMOS, PDSO14 RoHS : Compliant |
| 3,000 | ||
| MAX1044EPA | Maxim Integrated Products | MAX1044 Switched-Capacitor Voltage Converter RoHS : Not Compliant |
| 451 | ||
| MIC2810-44MYML | Micrel Inc | Power Supply Support Circuit, Fixed, 2 Channel RoHS : Compliant |
| 25,979 | ||
TDC1044AN9C | Rochester Electronics LLC | TDC1044A - ADC, Proprietary Method, 4-Bit, 1 Func, 1 Channel, Parallel, 4 Bits Access, Bipolar, PDIP16 RoHS : Not Compliant | 10,061 | |||
 Sager | ESQ-104-48-G-S | Samtec Inc | PC / 104 Connectors Elevated Socket Strip, 0.100 Pitch RoHS : Compliant |
| 80 | |
| 1044 | Keystone Electronics Corp | Cylindrical Battery Contacts, Clips, Holders & Springs 18650 SOLDER TAIL BATTERY HOLDER |
| 0 | ||
| 310-44-104-41-001000 | Mill-Max Mfg Corp | IC & Component Sockets Interconnect Socket RoHS : Compliant |
| 0 | ||
| CR1-A12-10-G-A1-0-44-B-2 | Carling Technologies | Circuit Breakers | 0 | |||
| 9721021044 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761421044 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9813911044 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| MU1-B-10-445-1-A21-B-C | Carling Technologies | Circuit Breakers MU1B104451A21BC RoHS : Compliant |
| 0 | ||
| RCV-00104405 | Carling Technologies | Rocker Switches VVARCV8-100 | 0 | |||
| RF174-03RP1-03RP1-0445 | Samtec Inc | RF Cable Assemblies 50 Ohm RF Cable Assembly, RG 174 Cable RoHS : Compliant | 0 | |||
| AAB1044-00 | TE Connectivity | TE Connectivity 91F3-19-14-1-C-HE300 RoHS : Compliant | 0 | |||
| 936010445 | Molex | Heavy Duty Power Connectors S-QD8/0 16A SP+PE F INSERT 7608.5807.0 | 0 | |||
| 833-91-044-30-001000 | Mill-Max Mfg Corp | IC & Component Sockets STANDARD SOCKET HEADER | 0 | |||
| ESQ-104-44-G-T-LL | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| FCF8-10-01-L-10.44-S | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant |
| 0 | ||
 TME | 501044-3010 | Molex | PIN: 30; Plating: gold-plated RoHS : Compliant |
| 3,446 | |
| 310-83-104-41-001101 | PRECI-DIP SSA | Connector: pin strips; socket; female; PIN: 4; soldering; 3A; 2.54mm RoHS : Compliant |
| 1,444 | ||
| 561-01044 | HellermannTyton | Markers; Marking: D; 2÷2.8mm; polyamide; yellow; push-in; WIC; W: 5mm RoHS : Compliant |
| 600 | ||
| 52104470 | Lapp Group | Reduction of threads for glands; M12; M20; polyamide; Pitch: 1.5 RoHS : Compliant |
| 399 | ||
| 431044 | Elesa+Ganter | Foot; rigid,with lever; Base dia: 40mm; M10; technopolymer PA |
| 334 | ||
| 64.1044-21 | Stäubli Electrical Connectors | Laboratory connector: 4mm banana; plug; 19A; 30VAC; 60VDC; black |
| 31 | ||
| 64.1044-22 | Stäubli Electrical Connectors | Laboratory connector: 4mm banana; plug; 19A; 30VAC; 60VDC; red |
| 19 | ||
| 1044 | Keystone Electronics Corp | Holder; 18650; Batt.no: 1; soldered |
| 0 | ||
| 32 AT10 / 4400 AFX | OPTIBELT GmbH | Timing belt; AT10; W: 32mm; Lw: 4400mm; polyurethane; metric |
| 0 | ||
| 41044650 | Stahlwille Tools | Wrench: ring; double-sided,bent; 46mm,50mm; L: 535mm; thin walled |
| 0 | ||
| 52104425 | Lapp Group | Thread adapter; PG36; M40; brass; nickel; SKINDICHT®; Pitch: 1.5 RoHS : Compliant |
| 0 | ||
| 52104494LF | Lapp Group | Enlarger of threads for glands |
| 0 | ||
| 00104422 | GSR | Tap: metric; M60; right hand thread; 5.5; L: 200mm; intermediate |
| 0 | ||
| 104-4-038-0-T-LS0-0946 | MPE-Garry GmbH | Connector: pin strips; PIN: 38; THT; 3A; 2.54mm; Plating: tinned RoHS : Compliant |
| 0 | ||
| 1044820 | Phoenix Contact | Connector: pluggable terminal block; plug; 32A; 1kV; PIN: 3; tinned RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | TCAN1044AEVDRQ1 | Texas Instruments | RoHS : Compliant | 34,735 | ||
| TCAN1044AEVDDFRQ1 | Texas Instruments | RoHS : Compliant | 16,837 | |||
| TCAN1044DRQ1 | Texas Instruments | RoHS : Compliant | 7,290 | |||
TCAN1044VDDFRQ1 | Texas Instruments | RoHS : Compliant | 5,352 | |||
| BD41044FJ-CE2 | ROHM Semiconductor | 车载用CAN FD收发器 RoHS : Compliant |
| 4,990 | ||
| TCAN1044ADRQ1 | Texas Instruments | RoHS : Compliant | 4,880 | |||
| B41044S9476M | Infineon Technologies AG | 4,848 | ||||
| TCAN1044VDRBRQ1 | Texas Instruments | RoHS : Compliant | 2,556 | |||
| SIT1044T | Silicon Iot | 2,000 | ||||
| SIT1044QTK/3 | Silicon Iot | 300 | ||||
 ComSIT USA | TJA1044GTJ | NXP Semiconductors | AVAILABLE EU RoHS : Compliant | 3,392 | ||
| TCAN1044VDRQ1 | Texas Instruments | AVAILABLE EU RoHS : Compliant | 5,624 | |||
ComSIT USA | TJA1044T | NXP Semiconductors | HIGH-SPEED CAN TRANSCEIVER WITH STANDBY MODE Interface Circuit, 1-Trnsvr, PDSO8 RoHS : Compliant | 65,000 | ||
| SN104487DR | Texas Instruments | Electronic Component RoHS : Not Compliant | 50,000 | |||
| CRCW2010442RFKTFBC | Vishay Intertechnologies | Fixed Resistor, Metal Glaze/thick Film, 0.75W, 442ohm, 400V, 1% +/-Tol, -100,100ppm/Cel, 2010 RoHS : Compliant | 8,000 | |||
| MAX1044CSA-T | Maxim Integrated Products | SWITCHED-CAPACITOR VOLTAGE CONVERTER Switched Capacitor Converter, 0.1A, 10kHz Switching Freq-Max, CMOS, PDSO8 RoHS : Not Compliant | 4,000 | |||
| TJA1044GTK3 | NXP Semiconductors | Electronic Component RoHS : Compliant | 3,414 | |||
| 923010449 | Molex | 14CKT RIBBON CABLE HARNESS RoHS : Compliant | 1,224 | |||
| SN104457DWR | Texas Instruments | Electronic Component RoHS : Not Compliant | 780 | |||
| MAX1044CSA+ | Maxim Integrated Products | Charge Pump INV/STPUP/STPDN -1.5V to -10V/3V to 20V 20mA 8-Pin SOIC N Tube RoHS : Compliant | 442 | |||
| SKB10440 | celduc relais | AC SOLID STATE RELAY Trigger Output SSR RoHS : Not Compliant | 280 | |||
| CXA1044BP | Sony Batteries | Electronic Component RoHS : Not Compliant | 119 | |||
| MAX1044CPA+ | Maxim Integrated Products | Charge Pump INV/STPUP/STPDN -1.5V to -10V/3V to 20V 20mA 8-Pin PDIP N Tube RoHS : Compliant | 100 | |||
| MAX1044CSA | Maxim Integrated Products | SWITCHED-CAPACITOR VOLTAGE CONVERTER Switched Capacitor Converter, 0.1A, 10kHz Switching Freq-Max, CMOS, PDSO8 RoHS : Not Compliant | 88 | |||
| TCAN1044DRQ1 | Texas Instruments | Interface Circuit, PDSO8 RoHS : Compliant | 50 | |||
| 104416 | ERNI | ERMET FEMALE TYPE E Board Connector, 200 Contact(s), 8 Row(s), Female, Right Angle, 0.079 inch Pitch, Press Fit Terminal RoHS : Compliant | 29 | |||
 Interstate Connecting Components | 104482-2 | TE Connectivity | 06 SHORT PT RCPT HSG DR .100CL RoHS : Compliant |
| 338 | |
| 81044/13-26-4 | TE Connectivity | 81044/13-26-4 RoHS : Not Compliant | 0 | |||
| 81044/6-22-6 | TE Connectivity | 81044/6-22-6 RoHS : Compliant | 0 | |||
| 81044/9-16-0 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 81044/9-4-1 | TE Connectivity | 81044/9-4-1 RoHS : Not Compliant | 0 | |||
| 1-104483-1 | TE Connectivity | 10 SHORT PT RCPT HSG DR .100CL RoHS : Compliant | 0 | |||
| 2CMA104412R1000 | Amphenol Sine Systems | 432EP5W INDUSTRIAL PLUG | 0 | |||
| 2CMA104447R1000 | Amphenol Sine Systems | ABB530P7SP INDUSTRIAL PLUG ULC | 0 | |||
| 440HS031B1104-4 | Glenair Inc | 0 | ||||
| 440HS069B2104-4BT | Glenair Inc | 0 | ||||
| 440HS069M1104-4 | Glenair Inc | BANDING BACKSHELL SELF-LOCK STRAIGHT W SHRINK BOOT RoHS : Compliant | 0 | |||
| 440HS073B1104-4B | Glenair Inc | 0 | ||||
| 10-441935-018 | Amphenol Industrial Operations | DISK | 0 | |||
| 10-441945-143 | Amphenol Industrial Operations | ADAPTER | 0 | |||
| 10127721-044NTLF | Amphenol FCi | 10127721-044NTLF-MTK 3.0 04P D | 0 | |||
 NexGen Digital | 54104-4596 | Molex | RoHS : Compliant | 25 | ||
 PEI Genesis | K1044 | Daniels Manufacturing Corporation (DMC) |
| 0 | ||
| 1104-4JW8 | HellermannTyton |
| 0 | |||
| BACF39A01044 | Amphenol PCD |
| 0 | |||
| G1044 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| 1104-4J | HellermannTyton |
| 0 | |||
| 104-4B7W21 | HellermannTyton |
| 0 | |||
| 104-4JW21 | HellermannTyton |
| 0 | |||
| 491104-4001 | Filconn |
| 0 | |||
| 160X10449X | Amphenol Corporation |
| 0 | |||
| C146-H01-044-G8 | Amphenol Tuchel |
| 0 | |||
| 104-4JW24 | HellermannTyton |
| 0 | |||
| 1104-4L | HellermannTyton |
| 0 | |||
| 1104-4JW24 | HellermannTyton |
| 0 | |||
| CA112104-4 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| 1461040-175-E-310X310-440-0 | ISC Engineering |
| 0 | |||
 Powell Electronics | 81044/12-24-9 | TE Connectivity | Connectors RoHS : Compliant |
| 86,064 | |
| 81044/9-16-0 | TE Connectivity | Connectors RoHS : Compliant |
| 10,143 | ||
| 5-104450-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 7,186 | ||
| 2316104-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 3,300 | ||
| 104482-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 2,528 | ||
| 104439-2 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 651 | ||
| 104430-2 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 498 | ||
| ESQ-104-49-L-D-LL | Samtec Inc | PCB Header, 2.54mm Pitch, Elevated, Squa RoHS : Compliant |
| 84 | ||
| ESQ-104-48-G-S | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 53 | ||
| ESW-104-48-G-S | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 53 | ||
| ESQ-104-48-S-S | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 53 | ||
| ESW-104-44-G-S | Samtec Inc | .100 Elevated Skt Strip RoHS : Compliant |
| 53 | ||
| ESQ-104-44-G-S | Samtec Inc | .100 PC104 Elevated Skt Strip RoHS : Compliant |
| 51 | ||
| ESQ-110-44-S-S-LL | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 26 | ||
| 1-1104453-5 | TE Connectivity | Connectors |
| 20 | ||
 Richardson RFPD | 48-10-44-LIM | Spectrum Control | High Power Fixed Coaxial Attenuator RoHS : Compliant |
| 0 | |
| 1044AS151KDS | Ohmite Mfg Co | COMPOSITION RESISTOR RoHS : Compliant | 0 | |||
| 260A-10-44 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant |
| 0 | ||
| 284-10-44 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| LTC1044AIN8#PBF | Analog Devices Inc | Charge Pump INV/STPUP/STPDN -1.5V to -12V 20mA 8-P RoHS : Compliant |
| 0 | ||
| 40-10-44 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant |
| 0 | ||
| 58-10-44 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant |
| 0 | ||
| 53-10-44 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant |
| 0 | ||
| SI5341B-D10442-GMR | Skyworks Solutions Inc | Low-Jitter, 10 or 4-Output, Any-Frequency, Any-Out RoHS : Compliant | 0 | |||
| SI5344D-D10449-GMR | Skyworks Solutions Inc | 10-Channel, Any-Frequency, Any-Output Jitter Atten RoHS : Compliant | 0 | |||
| SI5348B-D10441-GM | Skyworks Solutions Inc | SI5348B-D10441-GM RoHS : Compliant | 0 | |||
| LTC1044AIS8#PBF | Analog Devices Inc | Charge Pump INV/STPUP/STPDN -1.5V to -12V 20mA 8- RoHS : Compliant |
| 0 | ||
| 73-10-44 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| ICP1044-1-350I | Microchip Technology Inc | 7.9-11GHz 30W Gan PA MMIC | 0 | |||
| SI51214-B10447-GMR | Skyworks Solutions Inc | Clock Generator 3MHz to 165MHz-IN 133MHz-OUT 6-Pin RoHS : Compliant | 0 | |||
 Rutronik | Q65113A1044 | ams OSRAM Group | SMT-TOPLED LONGL.WHITE 900mcd RoHS : Compliant |
| 6,000 | |
 Chip 1 Exchange | 104479-9 | TE Connectivity | INSTOCK RoHS : Compliant | 390,000 | ||
| TPD1044F(T5LHLS,F) | Toshiba America Electronic Components | INSTOCK | 151,138 | |||
| 104481-6 | TE Connectivity | INSTOCK RoHS : Not Compliant | 114,819 | |||
| 104479-7 | TE Connectivity | INSTOCK RoHS : Not Compliant | 66,144 | |||
| 54104-4533 | Molex | INSTOCK RoHS : Compliant | 60,450 | |||
| 5-104450-2 | TE Connectivity | INSTOCK RoHS : Compliant | 24,381 | |||
| 2029104-4 | TE Connectivity | INSTOCK RoHS : Compliant | 14,794 | |||
| 104480-2 | INSTOCK | 11,000 | ||||
| TCAN1044AVDRBRQ1 | Texas Instruments | INSTOCK RoHS : Compliant | 9,000 | |||
| 5-104450-7 | TE Connectivity | INSTOCK RoHS : Compliant | 7,455 | |||
| 54104-4331 | Molex | INSTOCK RoHS : Compliant | 5,850 | |||
| CH376001-044 | INSTOCK | 882 | ||||
| WM81044/12-22-0 | NEXCO | INSTOCK | 400 | |||
| 104-41076 | ept Connectors | INSTOCK | 65 | |||
| 12110440 | CONNT | INSTOCK | 4 | |||
 Avnet Abacus | 104479-9 | TE Connectivity | Contact AMPMODU MTE Series Socket Crimp 20 AWG Gold Plated Contacts (Alt: 104479-9) RoHS : Compliant | 180,000 | ||
| 1-104479-0 | TE Connectivity | Contact MTE Socket Crimp 20 AWG Gold Plated Contacts AMPMODU Short Point Connectors (Alt: 1-104479-0) RoHS : Compliant | 60,000 | |||
| 104479-9 | TE Connectivity | Contact AMPMODU MTE Series Socket Crimp 20 AWG Gold Plated Contacts (Alt: 104479-9) RoHS : Compliant | 30,000 | |||
| 310-87-104-41-001101 | PRECI-DIP SSA | (Alt: 310-87-104-41-001101) RoHS : Compliant | 23,800 | |||
| 1-104480-2 | TE Connectivity | Contact MTE Socket Crimp 22 AWG Gold Plated Contacts AMPMODU Short Point Connectors (Alt: 1-104480-2) RoHS : Compliant | 15,000 | |||
| 878310441 | Molex | Pin Header Signal 2 mm 2 Rows 4 Contacts Through Hole Straight MilliGrid 87831 Series (Alt: 878310441) RoHS : Compliant | 9,680 | |||
| 1-104480-6 | TE Connectivity | Contact AMPMODU Short Point Socket Crimp 22 AWG Gold Plated Contacts (Alt: 1-104480-6) RoHS : Compliant | 4,000 | |||
| 61083-104402LF | Amphenol Corporation | Mezzanine Connector Header 08 mm 2 Rows 100 Contacts Surface Mount Brass (Alt: 61083-104402LF) RoHS : Compliant | 4,000 | |||
| M80-8510442 | Harwin | Conn Datamate Header 4 POS 2mm Solder RA Through Hole (Alt: M80-8510442) RoHS : Compliant | 800 | |||
| M80-5T10442MC | Harwin | Datamate JTek DIL Male Vertical 3mm PC Tail Connector selective gold tin retainers for 101Lok (Alt: M80-5T10442MC) RoHS : Compliant | 720 | |||
| M80-4610442 | Harwin | Datamate JTek DIL Female Small Bore Crimp Connector gold clip tin shell with jackscrews (Alt: M80-4610442) RoHS : Compliant | 700 | |||
| M80-5T10442M3 | Harwin | Conn Datamate M 4 POS 2mm Solder ST ThruHole Tube (Alt: M80-5T10442M3) RoHS : Compliant | 504 | |||
| M80-4810442 | Harwin | Datamate JTek DIL Female Small Bore Crimp Connector gold clip tin shell (Alt: M80-4810442) RoHS : Compliant | 86 | |||
| 875691044 | Molex | (Alt: 875691044) RoHS : Compliant | 0 | |||
| 875691044 | Molex | (Alt: 875691044) RoHS : Compliant | 0 | |||
Avnet Asia | 801044-SF | TE Connectivity | 3 PHASE SLIM LINE FILTER 480VAC 100A (Alt: 801044-SF) RoHS : Compliant |
| 1 | |
| R7F7010443AFP-C#BA2 | Renesas Electronics Corporation | (Alt: R7F7010443AFP-C#BA2) RoHS : Not Compliant | 0 | |||
| 0541044596 | Molex | FFC / FPC Board Connector, 45 Contacts, 1 Row, 0.5mm, Top, Tin-Bismuth Plated, SMT, Right Angle (Alt: 0541044596) RoHS : Compliant | 0 | |||
| CEET16410443301 | Amphenol Corporation | 164P PCIE_X16 SKT (Alt: CEET16410443301) RoHS : Compliant | 0 | |||
| G888A104431THR | Amphenol Corporation | (Alt: G888A104431THR) RoHS : Compliant | 0 | |||
| NB3N51044DTR2G | onsemi | Clock Generator, 3.3 V, Crystal to 100 MHz / 125MHz, Quad HCSL / LVDS (Alt: NB3N51044DTR2G) RoHS : Compliant | 0 | |||
| 61082-104402LF | Amphenol Corporation | (Alt: 61082-104402LF) RoHS : Compliant | 0 | |||
| CF810KA00301044 | Qnity Laird | CF,NICU,CF,V0,RL (Alt: CF810KA00301044) RoHS : Compliant | 0 | |||
| 5-104477-9 | TE Connectivity | (Alt: 5-104477-9) RoHS : Compliant |
| 0 | ||
| 61083-104400LF | Amphenol Corporation | (Alt: 61083-104400LF) RoHS : Compliant | 0 | |||
| 0878310442 | Molex | Pin Header, 4 Contacts, 2 Rows, 2mm, Gold, 2A, Straight, Shrouded, Phosphor Bronze, THT (Alt: 0878310442) RoHS : Compliant | 0 | |||
| 0782111044 | Molex | (Alt: 0782111044) RoHS : Compliant | 0 | |||
| 104479-9 | TE Connectivity | (Alt: 104479-9) RoHS : Compliant | 0 | |||
| 0003061044 | Molex | Connector Housing, Receptacle, 4 Contacts, 2 Rows, 3.68 mm, 2004 Series, Nylon, Standard .062"" (Alt: 0003061044) RoHS : Compliant | 0 | |||
0428171044 | Molex | Terminal, Pin, Wire to Wire Connector, Silver, Copper Alloy, Cable Mount, Straight, 42817 Series (Alt: 0428171044) RoHS : Compliant | 0 | |||
 Avnet Silica | TJA1044GTJ | NXP Semiconductors | CAN 1Mbps NormalStandby 525V 8Pin SO TR (Alt: TJA1044GTJ) RoHS : Compliant | 517,500 | ||
| TJA1044GTK/3Z | NXP Semiconductors | CAN High Speed Transceiver 1Mbps NormalStandby 475V to 525V 8Pin HVSON TR (Alt: TJA1044GTK/3Z) RoHS : Compliant | 162,000 | |||
| TJA1044CT/0Z | NXP Semiconductors | CAN Transceiver 1 TX 1 RX 45 V to 55 V 8 Pins SOIC (Alt: TJA1044CT/0Z) RoHS : Compliant | 92,500 | |||
| TJA1044GT/3Z | NXP Semiconductors | CAN FD Transceiver 1 TX 1 RX 45 V to 55 V 8 Pins SOIC (Alt: TJA1044GT/3Z) RoHS : Compliant | 47,500 | |||
| TJA1044BTK/0J | NXP Semiconductors | CAN Interface CAN FD Transceiver 5 Mbps 45 V 55 V HVSON 8 Pins (Alt: TJA1044BTK/0J) RoHS : Compliant | 6,000 | |||
APX810-44SAG-7 | Diodes Incorporated | Processor Supervisor 438V 25V3V33V5V 3Pin SOT23 TR (Alt: APX810-44SAG-7) RoHS : Compliant | 3,000 | |||
| TJA1044GT/1Z | NXP Semiconductors | (Alt: TJA1044GT/1Z) RoHS : Compliant | 2,500 | |||
| TJA1044T,118 | NXP Semiconductors | CAN 40Kbps Standby 525V 8Pin SO (Alt: TJA1044T,118) RoHS : Compliant | 2,500 | |||
| TC1044SEPA | Microchip Technology Inc | (Alt: TC1044SEPA) RoHS : Compliant | 0 | |||
| TJA1044DT/0Z | NXP Semiconductors | CAN Interface CAN FD Transceiver 5 Mbps 45 V 55 V SOIC 8 Pins (Alt: TJA1044DT/0Z) RoHS : Compliant | 0 | |||
| TJA1044ET/0Z | NXP Semiconductors | CAN Interface CAN FD Transceiver 5 Mbps 45 V 55 V SOIC 8 Pins (Alt: TJA1044ET/0Z) RoHS : Compliant | 0 | |||
| C10449_TINA-W | LEDIL | ROUND TINA LENS WITH TRANSPARENT COLOR (Alt: C10449_TINA-W) RoHS : Compliant | 0 | |||
| TJA1044GTK/3/TZ | NXP Semiconductors | HighSpeed CAN Transceiver 5Mbps Standby 475V to 525V 8Pin HVSON TR (Alt: TJA1044GTK/3/TZ) RoHS : Compliant | 0 | |||
| CP10444_LISA-SS | LEDIL | LENS ROUND 1 POS 108MM OD 73MM H (Alt: CP10444_LISA-SS) RoHS : Compliant | 0 | |||
| MPQ4324GDE-1044-AECCFA2-Z | Monolithic Power Systems | (Alt: MPQ4324GDE-1044-AECCFA2-Z) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | MA1044.A.ACTX.002 | Taoglas Antenna Solutions | MA1044 GPS, Wi-Fi, AM/FM & SDARS 4in1 Sharkfin Antenna |
| 0 | |
| 1001044 | Kyocera AVX Components | GPS Ceramic Patch Antenna RoHS : Compliant |
| 0 | ||
| CAB.01044 | Taoglas Antenna Solutions | Coaxial Cable SMA to MCX, 2.9" Length |
| 0 | ||
| 301-1010-44 | Digi International Inc | Digi Hubport/4c 5.5-30VDC powered USB 2.0 hub, extended temp -40C to 70C, non-captive connector (includes 1meter power connector pigtail and 5 meter A to B USB cable) |
| 0 | ||
 Component Electronics, Inc | 1680411044 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,600 | |
| 1-104481-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 800 | ||
| 09-66-1044 | Molex | IN STOCK SHIP TODAY | 500 | |||
| SXA1044294-R1A | IMS Wire | IN STOCK SHIP TODAY |
| 470 | ||
| M81044/12-20-2 | IN STOCK SHIP TODAY |
| 351 | |||
| 304-13-104-41-770 | PRECI CONTAC | IN STOCK SHIP TODAY | 214 | |||
| 10-18-1044 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 110 | ||
| 0010181044 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 100 | ||
| SS6951-0440-2.250-01 | Lyn-Tron Inc | IN STOCK SHIP TODAY | 100 | |||
| 010440P050 | Eagle Plastic Devices | IN STOCK SHIP TODAY |
| 95 | ||
| 5710-44-40 | Seastrom Mfg | IN STOCK SHIP TODAY | 43 | |||
| CXA1044P | Sony Batteries | IN STOCK SHIP TODAY | 30 | |||
| 10442000 | CONTACT | IN STOCK SHIP TODAY |
| 9 | ||
| 104417 | ERNI | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| 10440000 | Lapp Group | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
 DB Roberts | E6-10-440R-50 | Southco |
| 727 | ||
| 10448F-P | Heyco | HSP-MDL-1-06M V-0 NATURAL 10PK | 0 | |||
| 010440CD125 | Essentra Components | BINDER COMBINATION SCREW, 4-40 | 0 | |||
| 010440H012 | Essentra Components | HEX UNSLOTTED BOLT, 4-40 THREA | 0 | |||
| 010440H175 | Essentra Components | HEX UNSLOTTED BOLT, 4-40 THREA | 0 | |||
| 010440P050 | Essentra Components | 0 | ||||
| 010440P087 | Essentra Components | PAN SLOTTED SCREW, 4-40 THREAD | 0 | |||
| 010440T012B | Essentra Components | 0 | ||||
| 010440WF062B | Essentra Components | 440X58 PHILLIPS FILLISTER BLK | 0 | |||
| 010440X043 | Essentra Components | HEX SLOTTED SCREW, 4-40 THREAD | 0 | |||
| 010440F025PC | Essentra Components | FILLISTER SLOTTED SCREW, 4-40 | 0 | |||
| 010440F062 | Essentra Components | FILLISTER SLOTTED SCREW, 4-40 | 0 | |||
| 010440P125 | Essentra Components | 0 | ||||
| 010440S050 | Essentra Components | SET SCREW, SLOTTED HEAD, 4-40 | 0 | |||
| 010440S087 | Essentra Components | SET SCREW, SLOTTED HEAD, 4-40 | 0 | |||
 EBV Elektronik | TJA1044GTK/3Z | NXP Semiconductors | CAN High Speed Transceiver 1Mbps NormalStandby 475V to 525V 8Pin HVSON TR (Alt: TJA1044GTK/3Z) RoHS : Compliant | 684,000 | ||
| TJA1044GT/3Z | NXP Semiconductors | CAN FD Transceiver 1 TX 1 RX 45 V to 55 V 8 Pins SOIC (Alt: TJA1044GT/3Z) RoHS : Compliant | 207,500 | |||
| TJA1044GTJ | NXP Semiconductors | CAN 1Mbps NormalStandby 525V 8Pin SO TR (Alt: TJA1044GTJ) RoHS : Compliant | 27,500 | |||
| TC1044SEPA | Microchip Technology Inc | (Alt: TC1044SEPA) RoHS : Compliant | 0 | |||
| TJA1044GT/1Z | NXP Semiconductors | (Alt: TJA1044GT/1Z) RoHS : Compliant | 0 | |||
| C10449_TINA-W | LEDIL | ROUND TINA LENS WITH TRANSPARENT COLOR (Alt: C10449_TINA-W) RoHS : Compliant | 0 | |||
| TJA1044GT/3/C | NXP Semiconductors | SO 8 Highspeed CAN transceiver with Standby mode (Alt: TJA1044GT/3/C) RoHS : Compliant | 0 | |||
| CP10444_LISA-SS | LEDIL | LENS ROUND 1 POS 108MM OD 73MM H (Alt: CP10444_LISA-SS) RoHS : Compliant | 0 | |||
| TPD1044F(T5LHIT1,F | Toshiba America Electronic Components | LowSide Switch for Motor Solenoid and Lamp Drive (Alt: TPD1044F(T5LHIT1,F) RoHS : Compliant | 0 | |||
| CM8070104423605S RH6E | Intel Corporation | MPU CISC 64Bit 32GHz 1200Pin FCLGA Tray (Alt: 999VX1) RoHS : Compliant | 0 | |||
| CM8070104423707S RH6F | Intel Corporation | (Alt: 999VX2) RoHS : Compliant | 0 | |||
| CM8070104422406S RH6D | Intel Corporation | Processor i510500TE 12MBit 37GHz 14nm DDR42666 1200Pin FCLGA Tray (Alt: 999VX0) RoHS : Compliant | 0 | |||
| CL8070104409309S RH85 | Intel Corporation | Intel Core i510500H Processor 12M Cache up to 450 GHz FCBGA14F Tray (Alt: 999W77) RoHS : Compliant | 0 | |||
| CM8070104424111S RH7T | Intel Corporation | MPU CISC 64Bit 32GHz 1200Pin FCLGA Tray (Alt: 999W63) RoHS : Compliant | 0 | |||
| CM8070104498106S RJFJ | Intel Corporation | (Alt: 99A083) RoHS : Compliant | 0 | |||
 ECCO | AP120110-44 | ITT Interconnect Solutions |
| 3 | ||
 FDH Electronics | M81044/13-26-2 | Marmon Aerospace & Defense | Wire and Cable |
| 30,800 | |
| M81044/12-24-8 | TE Connectivity | Hook-Up Wire RoHS : Compliant |
| 18,440 | ||
| EE81044/12-16-93 | Marmon Aerospace & Defense | Wire and Cable | 244 | |||
| 10-442297-212 | Amphenol Aerospace | Connector 38999 | 150 | |||
| 10-442297-152 | Amphenol Aerospace | Connector 38999 | 143 | |||
| M81044/12-20-2 | Wire | Wire and Cable | 48 | |||
| M81044/9-14-9-FT | Marmon Aerospace & Defense | Wire and Cable |
| 40 | ||
| 10-442297-118 | Amphenol Aerospace | Circular Conn |
| 0 | ||
| 104-4-G-W1 | HellermannTyton | Harness Mgmt | 0 | |||
| 1104-4-J | HellermannTyton | Harness Mgmt | 0 | |||
| 1104-4-G-WM250 | HellermannTyton | Harness Mgmt | 0 | |||
| 104-4-J-W24 | HellermannTyton | Harness Mgmt | 0 | |||
| M81044/12-20-2 | TE Connectivity | Wire and Cable RoHS : Compliant | 0 | |||
| 380MS141NF1104-4 | Glenair Inc | Backshells & Ac RoHS : Not Compliant | 0 | |||
| 104-4-B7-W17 | HellermannTyton | Harness Mgmt | 0 | |||
 Flip Electronics | TJA1044AT/0CZ | NXP Semiconductors | Stock | 10,000 | ||
| TJA1044T/CJ | NXP Semiconductors | Stock | 10,000 | |||
| TJA1044T/TJ | NXP Semiconductors | Stock | 7,500 | |||
| TJA1044GT/1TXZ | NXP Semiconductors | Stock | 7,500 | |||
| TJA1044VT/TZ | NXP Semiconductors | Stock | 7,500 | |||
| TJA1044T/1CNZ | NXP Semiconductors | Stock | 7,500 | |||
| TJA1044VT/CZ | NXP Semiconductors | Stock | 7,500 | |||
| TJA1044ATK/0CZ | NXP Semiconductors | Stock | 6,000 | |||
| TJA1044ATK/3/0TZ | NXP Semiconductors | Stock | 6,000 | |||
| TJA1044GT/CJ | NXP Semiconductors | Stock | 2,500 | |||
| TJA1044GT/TJ | NXP Semiconductors | Stock | 2,500 | |||
| TJA1044GT/1CNZ | NXP Semiconductors | Stock | 2,500 | |||
| TJA1044GT/1TNZ | NXP Semiconductors | Stock | 2,500 | |||
| NB3N51044DTR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,866 | ||
| NB3N51044DTG | onsemi | Stock, Ship Today RoHS : Compliant |
| 328 | ||
 Maritex | TCAN1044AVDRQ1 | Texas Instruments | Other Interface ICs; TCAN1044AVDRQ1; TEXAS INSTRUMENTS; 8; 5.5 V; 1.7 V; SOIC RoHS : Compliant |
| 33,478 | |
| APA-104-4RGB | APA-ELECTRONIC | Light Emitting Diode PLCC4; SMD 5050; with internal driver IC; RGB Full Color; Red: 360-400mcd; Green: 550-600mcd; Blue: 140-150mcd; 50mA; 5V; water clear lens; 120 degrees; 5mm x 5mm x 1.6mm |
| 23,798 | ||
| 104479-8 | TE Connectivity | Rectangular Connector Contacts; 104479-8; TE CONNECTIVITY; Tin; Crimp; Cable; Socket RoHS : Compliant |
| 16,336 | ||
| TJA1044GTKZ | NXP Semiconductors | Other Interface ICs; TJA1044GTKZ; NXP SEMICONDUCTORS RoHS : Compliant |
| 9,133 | ||
| TJA1044T/1 | NXP Semiconductors | Other Interface ICs; TJA1044T/1; NXP SEMICONDUCTORS; 8; 5.25 V; 2.95 V; SO |
| 1,866 | ||
| TJA1044GTK/3 | NXP Semiconductors | CAN Bus Transceivers; TJA1044GTK/3; NXP SEMICONDUCTORS RoHS : Compliant |
| 1,582 | ||
| TCAN1044AVDRBRQ1 | Texas Instruments | Other Interface ICs; TCAN1044AVDRBRQ1; TEXAS INSTRUMENTS; 8; 5.5 V; 1.7 V RoHS : Compliant |
| 1,408 | ||
| A1.0X24X110-4488B2T | JINDA | Flexible Flat Cable; 1.00mm pitch; 24-conductors; type C; L=110mm; U=60V; oper.temper. 105deg. C |
| 1,000 | ||
| A0.5*30*110-4488B1T | JINDA | Flexible Flat Cable; 0.50mm pitch; 30 conductors; type C (same stripping side at both ends); L=110mm; U=60V; oper.temper. 80deg. C, UL20624 |
| 679 | ||
| APA-104-4RGB-BK | APA-ELECTRONIC | Light Emitting Diode PLCC4; SMD 5050; with internal driver IC; RGB Full Color; Red: 240-450mcd; Green: 697.5-1162.5mcd; Blue: 160-320mcd; 50mA; 5V; water clear lens; 120 degrees; 5mm x 5mm x 1.6mm; black housing color |
| 523 | ||
| TJA1044T/1Z | NXP Semiconductors | Other Interface ICs; TJA1044T/1Z; NXP SEMICONDUCTORS RoHS : Compliant |
| 290 | ||
| TJA1044GT/1Z | NXP Semiconductors | Other Interface ICs; TJA1044GT/1Z; NXP SEMICONDUCTORS RoHS : Compliant |
| 152 | ||
| TJA1044GT/3 | NXP Semiconductors | CAN Bus Transceivers; TJA1044GT/3; NXP SEMICONDUCTORS; 4.75 V; 5.25 V RoHS : Compliant |
| 151 | ||
| 22N*50*1.0 (4/4, 8/8)*P7 | KORATECH | Flexible Flat Cable; 1.00mm pitch; 22-conductors; type C; L=50mm; U=30V; oper.temper. 80deg. C |
| 130 | ||
| C10447_CUTE-4-M | LEDIL | LEDIL LENS CUTE-4-CM 10447, for XR-E XLAMP, RoHS |
| 4 | ||
 Master Electronics | JPS1044F | Thomas & Betts | J-Line Plug - Watertight/Weathertight - 100 Amp - 600V - 4P4W - 1.5 Inch Bushing - Cast Aluminum - F Pol RoHS : Compliant |
| 1 | |
| MU1-B-10-445-1-A21-B-C | Carling Technologies | MU1B104451A21BC RoHS : Compliant |
| 0 | ||
| ESQ-104-44-G-T-LL | Samtec Inc | .100 PC/104™ Elevated Socket Strip RoHS : Compliant |
| 0 | ||
| ESQ-104-48-G-S | Samtec Inc | .100 PC/104™ Elevated Socket Strip RoHS : Compliant |
| 0 | ||
| ESQ-110-44-T-S-003 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FCF8-10-01-L-10.44-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HCMD-08-D-10.44-01 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-104-41-F-Q-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-104-42-L-S-RA | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-104-42-S-Q-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HLCD-20-10.44-TL-TR-3 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HLCD-40-10.44-TR-TR-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 81044/12-24-946 | TE Connectivity | 81044/12-24-946 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 81044/12-26-5 | TE Connectivity | 81044/12-26-5 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 81044/13-26-4 | TE Connectivity | 81044/13-26-4 MOQ Reduction RoHS : Not Compliant |
| 0 | ||
 Neutron USA | 102010448 | Seeed Development Ltd | Bluetooth Development Tools - 802.15.1 XIAO nRF52840 Arduino / MicroPython - Bluetooth5.0 |
| 50 | |
| 2710440000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories LL TTB 6/3 RoHS : Compliant |
| 50 | ||
| 10446 | Desco Industries Inc | Surface And Mat Cleaner, 1 qt Spray, Alcohol-Free ESD, Reztore Series |
| 50 | ||
| 3-104-412 | Schurter Electronic Components | AC Power Entry Modules 10A/15A F Black, 4 Outlet, 1.5mm Panel Thickness, N Side Light Pipe, N/PE bussed, Top, PCB RoHS : Compliant |
| 50 | ||
1411044 | Phoenix Contact | Circular connector;Plug;Male Pins;8 position;M12-8;0.600A;57VDC RoHS : Compliant |
| 50 | ||
| 1044470060 | Weidmüller Interface GmbH & Co. KG | Ethernet Cables / Networking Cables IE-C5DD4UG0060MCSA70-E RoHS : Compliant |
| 12 | ||
| CAP-35/10/440R | Littelfuse Inc | Motor Start Capacitors & Motor Run Capacitors 35+10 MFD 370/440V ROUND CAP RoHS : Unknown |
| 10 | ||
| 1044470100 | Weidmüller Interface GmbH & Co. KG | Ethernet Cables / Networking Cables IE-C5DD4UG0100MCSA20-E RoHS : Compliant |
| 10 | ||
| 1044470050 | Weidmüller Interface GmbH & Co. KG | Ethernet Cables / Networking Cables IE-C5DD4UG0050MCSA20-E RoHS : Compliant |
| 7 | ||
| CAP-70/10/440R | Littelfuse Inc | Motor Start Capacitors & Motor Run Capacitors 70+10 MFD 370/440V ROUND CAP RoHS : Unknown |
| 7 | ||
| 6104401263800 | HARTING Technology Group | Heavy Duty Power Connectors RoHS : Compliant |
| 6 | ||
| CAP-60/10/440 | Littelfuse Inc | Motor Start Capacitors & Motor Run Capacitors 60+10MFD 370/440V OVAL RUN CAPACITOR RoHS : Unknown |
| 5 | ||
| 1044351 | Phoenix Contact | Printers Dummy cartridge for transportation color: black RoHS : Compliant |
| 4 | ||
| 1044470015 | Weidmüller Interface GmbH & Co. KG | Ethernet Cables / Networking Cables IE-C5DD4UG0015MCSA70-E RoHS : Compliant |
| 0 | ||
| CAP-10/10/440R | Littelfuse Inc | Motor Start Capacitors & Motor Run Capacitors 10+10 MFD 370/440V ROUND CAP RoHS : Unknown |
| 0 | ||
 Pasternack Enterprises US | PE3W10445/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMP Female Right Angle Cable Using RG178 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMP female right angle cable using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to SMP female right angle cable using RG178 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle SMP cable connection on the other. Our SMA to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. PE3W10445/HS can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMP jack cable assembly PE3W10445/HS is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female bulkhead to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10445/HS can also be used in the other direction and will be right angle SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMP female right angle cable using RG178 coax with heatshrink. | 1,465 | ||
| PEANRBD1044 | Pasternack Enterprises | Key Specifications, Antenna Type: Rubber Duck, Polarization: Linear, Minimum Frequency: 2.4 GHz, Maximum Frequency: 2.5 GHz, Connector 1 Polarity: Standard, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Maximum Input VSWR: 2:1. 2.4 GHz to 2.5 GHz Stubby Antenna, Monopole, 90-degree angle, SMA Male Connector, 2 dBi Gain. The Pasternack PEANRBD1044 WiFi antenna is an omni antenna operating from 2.4 GHz to 2.5 GHz with 2 dBi gain. Our high-quality rubber duck antenna transmits high power signals, increasing the signal strength, thus providing improved coverage, better broadcast control, and faster speed. The SMA male connector on this monopole antenna enables it to be used vertically, at a right angle, or at any angle in between. This PEANRBD1044 stubby WiFi antenna is 0.37 inches wide, 2.01 inches long, and 0.37 inches tall. Pasternack’s omnidirectional antenna has a maximum input VSWR of 2:1, which results in the best power transfer and reduced losses. This omnidirectional antenna has a linear polarization, an SMA male connector, and an ABS radome material. Our black WiFi antenna functions between -40 to 65 degrees C and has 50 Ohm impedance. The Pasternack WiFi antenna is ideal for 2.4 GHz Wi-Fi and ISM applications, WLAN, Bluetooth, IOT, wireless audio systems, home automation, telemetry, remote monitoring, wireless data acquisition, 802.11 a/b/g/n/ax, wireless hotspots. This monopole antenna has a waterproof design, a high power handling capacity, and IP65 ingress protection rating. The PEANRBD1044 single-band antenna has a gain of 2 dBi for the 2.4 GHz to 2.5 GHz frequency range. This 2 dBi gain omni directional antenna is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality antennas and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect 2.4 GHz to 2.5 GHz antenna for your requirement. |
| 77 | ||
| PE3C10447-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.92mm Male to 1.85mm Female Bulkhead Cable 36 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 2.92mm male to 1.85mm female bulkhead cable 36 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 1.85mm female bulkhead cable 36 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a 1.85mm bulkhead cable connection on the other. Our 2.92mm to 1.85mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10447-36 can also be known as a 2.92mm plug to 1.85mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. Our 2.92mm male to bulkhead 1.85mm female cable has a maximum VSWR of 1.4:1. 2.92mm plug to 1.85mm jack cable assembly PE3C10447-36 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10447-36 can also be used in the other direction and will be a 1.85mm female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to 1.85mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 1.85mm RF cable assembly as per your requirements. |
| 74 | ||
| PE3C10446-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to 1.85mm Female Cable 12 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 2.92mm male to 1.85mm female cable 12 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 1.85mm female cable 12 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a 1.85mm cable connection on the other. Our 2.92mm to 1.85mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10446-12 can also be known as a 2.92mm plug to 1.85mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. Our 2.92mm male to 1.85mm female cable has a maximum VSWR of 1.4:1. 2.92mm plug to 1.85mm jack cable assembly PE3C10446-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10446-12 can also be used in the other direction and will be a 1.85mm female to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to 1.85mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 1.85mm RF cable assembly as per your requirements. |
| 11 | ||
| PE3C10443-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 1.85mm Female to 1.85mm Female Bulkhead Cable 18 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 1.85mm female to 1.85mm female bulkhead cable 18 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm female to 1.85mm female bulkhead cable 18 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 1.85mm bulkhead cable connection on the other. Our 1.85mm to 1.85mm cable assembly has a female gender on end 1 and a female on end 2. PE3C10443-18 can also be known as a 1.85mm jack to 1.85mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has an in-series connection. Our 1.85mm female to bulkhead 1.85mm female cable has a maximum VSWR of 1.4:1. 1.85mm jack to 1.85mm jack cable assembly PE3C10443-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10443-18 can also be used in the other direction and will be a 1.85mm female bulkhead to 1.85mm female cable assembly if the opposite connectivity is required. 1.85mm jack to 1.85mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 1.85mm RF cable assembly as per your requirements. |
| 11 | ||
| PE3C10446-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Male to 1.85mm Female Cable 24 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 2.92mm male to 1.85mm female cable 24 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 1.85mm female cable 24 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a 1.85mm cable connection on the other. Our 2.92mm to 1.85mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10446-24 can also be known as a 2.92mm plug to 1.85mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. Our 2.92mm male to 1.85mm female cable has a maximum VSWR of 1.4:1. 2.92mm plug to 1.85mm jack cable assembly PE3C10446-24 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10446-24 can also be used in the other direction and will be a 1.85mm female to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to 1.85mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 1.85mm RF cable assembly as per your requirements. |
| 11 | ||
| PE83CR1044 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Minimum Frequency: 2 GHz, Maximum Frequency: 4 GHz, Impedance: 50 Ohm, Maximum Insertion Loss: 1.5 dB, Maximum Input Power (CW): 100 Watts, Minimum Isolation: 32 dB. Circulator with 32 dB Isolation from 2 to 4 GHz, 100 Watts and SMA Female. The Pasternack PE83CR1044 RF circulator is just part of a large number of radio frequency products specifically stocked to be readily available for rapid shipment. The Pasternack is built with female SMA connectors on connectors 1, 2, and 3. This connectorized, triple junction circulator features a clockwise rotation direction. Our 3-port SMA circulator design is rated for a minimum frequency of 2 GHz and a maximum frequency of 4 GHz. This radio frequency coaxial circulator has a typical VSWR of 1.35:1, with a maximum value of 1.5:1. Pasternack SMA RF coaxial circulator PE83CR1044 offers a minimum isolation of 32 dB and a maximum input power (CW) of 100 watts. Our SMA RF coaxial circulator delivers a typical insertion loss of 1 dB and a maximum of 1.5 dB. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. Our Pasternack circulator comes with an aluminum alloy housing with a nickel finish. The 3-port SMA circulator operates with an impedance of 50 Ohms. This triple junction circulator operates within a temperature range of -40 to 80 degrees Celsius. RF circulator PE83CR1044 from Pasternack measures 1.26 inches in length, 1.26 inches in width, and 0.71 inches in height. Our coaxial circulator is just one of more than 1 million RF, microwave and millimeter wave parts we stock. This circulator with SMA connectors is ready to buy and can be shipped worldwide. Pasternack also maintains a wide selection of other radio frequency coaxial circulator products that ship on the same day. |
| 5 | ||
| PE3C10445-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 1.85mm Female to 1.85mm Female Cable 36 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 1.85mm female to 1.85mm female cable 36 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm female to 1.85mm female cable 36 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assembly has a female gender on end 1 and a female on end 2. PE3C10445-36 can also be known as a 1.85mm jack to 1.85mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has an in-series connection. Our 1.85mm female to 1.85mm female cable has a maximum VSWR of 1.4:1. 1.85mm jack to 1.85mm jack cable assembly PE3C10445-36 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. 1.85mm jack to 1.85mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 1.85mm RF cable assembly as per your requirements. |
| 5 | ||
| PEWCA1044 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-112, Coax Connector Impedance: 50 Ohm, Coax Connector Series: SMA, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 7.05 GHz, Maximum Frequency: 10 GHz. WR-112 CPR-112G Grooved Flange to SMA Female Waveguide to Coax Adapter, 7.05 GHz to 10 GHz, H Band, Aluminum, Paint. PEWCA1044 WR-112 waveguide to coax adapter is also known as a WR-112 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR112 to SMA connector and has a female gender. Our WR-112 to SMA female waveguide adapter transition has a right angle design and has a CPR-112G flange. Pasternack right angle WR-112 to SMA waveguide to coaxial cable transition / adapter has a minimum frequency of 7.05 GHz and a maximum frequency of 10 GHz. WR-112 waveguide to SMA transition adapter to coax PEWCA1044 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-112 waveguide adapter transition with SMA interface can ship worldwide the same day that it is purchased as with our other available RF parts. |
| 2 | ||
| PE3C10448-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Female Bulkhead to 1.85mm Male Cable 12 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 1.85mm male cable 12 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 1.85mm male cable 12 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a 1.85mm cable connection on the other. Our 2.92mm to 1.85mm cable assembly has a female gender on end 1 and a male on end 2. PE3C10448-12 can also be known as a 2.92mm jack to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. 2.92mm jack to 1.85mm plug cable assembly PE3C10448-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method, while the other has the clamp/solder attachment method and a stainless steel body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10448-12 can also be used in the other direction and will be a 1.85mm male to 2.92mm female bulkhead cable assembly if the opposite connectivity is required. 2.92mm jack bulkhead to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 1.85mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10447-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Female Bulkhead to BNC Female Bulkhead Cable 60 Inch Length Using RG223 Coax., Radio frequency assembly BNC female bulkhead to BNC female bulkhead cable 60 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to BNC female bulkhead cable 60 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3W10447-60 can also be known as a BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10447-60 RF cable has a PVC jacket of 0.209-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has an in-series connection. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. BNC jack to BNC jack cable assembly PE3W10447-60 is built with RG223 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10448 | Pasternack Enterprises | Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FME, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. 10-32 Male to FME Jack Cable Using LMR-100 Coax. PE3W10448 is a 10-32 male to FME jack cable using LMR-100A coax. This Pasternack 10-32 male to FME jack cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm FME for connector 2. Our male 10-32 to jack FME cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10448 10-32 male to FME jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W21044LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using PE-P086HF Coax with HeatShrink, LF Solder. PE3W21044LF/HS is a SMA male to SMA male cable using PE-P086HF coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21044LF/HS SMA male to SMA male cable assembly is constructed with PE-P086HF coax. | 0 | |||
| PE3C10444-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 1.85mm Male to 1.85mm Female Cable 6 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 1.85mm male to 1.85mm female cable 6 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 1.85mm female cable 6 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10444-6 can also be known as a 1.85mm plug to 1.85mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has an in-series connection. Our 1.85mm male to 1.85mm female cable has a maximum VSWR of 1.4:1. 1.85mm plug to 1.85mm jack cable assembly PE3C10444-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10444-6 can also be used in the other direction and will be a 1.85mm female to 1.85mm male cable assembly if the opposite connectivity is required. 1.85mm plug to 1.85mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 1.85mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10447-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. BNC Female Bulkhead to BNC Female Bulkhead Cable 72 Inch Length Using RG223 Coax., Radio frequency assembly BNC female bulkhead to BNC female bulkhead cable 72 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to BNC female bulkhead cable 72 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3W10447-72 can also be known as a BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10447-72 RF cable has a PVC jacket of 0.209-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has an in-series connection. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. BNC jack to BNC jack cable assembly PE3W10447-72 is built with RG223 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 0 | ||
 TE Connectivity | 104479-8 | TE Connectivity | SHORT POINT CONT PLTD SN Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 24 – 20 AWG Operating Voltage: 300 VAC Tin (Sn) Socket 24 – 20 AWG | Connector Contact | Part Number: 104479-8 | Internal Number: 104479-8 | TE Connectivity RoHS : Compliant |
| 80,344 | |
| 1-104480-5 | TE Connectivity | SHORT POINT RCP CONT LP Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 26 – 22 AWG Operating Voltage: 300 VAC Gold (Au) Socket Tin 26 – 22 AWG | Connector Contact | Part Number: 1-104480-5 | Internal Number: 1-104480-5 | TE Connectivity RoHS : Compliant |
| 70,053 | ||
| 1-104480-4 | TE Connectivity | SHORT POINT RECP CONT LP Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 26 – 22 AWG Operating Voltage: 300 VAC Tin (Sn) Socket 26 – 22 AWG | Connector Contact | Part Number: 1-104480-4 | Internal Number: 1-104480-4 | TE Connectivity RoHS : Compliant |
| 36,793 | ||
| 104479-7 | TE Connectivity | SHORT POINT RECP CONT LP Part Number: 104479-7 | Internal Number: 104479-7 | Alias Number: 14-0146 | TE Connectivity RoHS : Compliant |
| 35,773 | ||
| 104483-9 | TE Connectivity | 14 SHORT PT RCPT HSG DR .100CL Number of Positions: 14 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: Without Termination Method to Wire & Cable: Crimp Standard Rectangular Connector | 14 Receptacle Housing Without | Part Number: 104483-9 | Internal Number: 104483-9 | TE Connectivity RoHS : Compliant |
| 2,985 | ||
| 104482-4 | TE Connectivity | 10 SHORT PT RCPT HSG DR .100CL Number of Positions: 10 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: Without Termination Method to Wire & Cable: Crimp Standard Rectangular Connector | 10 Receptacle Housing Without | Part Number: 104482-4 | Internal Number: 104482-4 | Alias Number: 210-00619 | TE Connectivity RoHS : Compliant |
| 2,926 | ||
| 104482-7 | TE Connectivity | 16 SHORT PT RCPT HSG DR .100CL Number of Positions: 16 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: Without Termination Method to Wire & Cable: Crimp Standard Rectangular Connector | 16 Receptacle Housing Without | Part Number: 104482-7 | Internal Number: 104482-7 | TE Connectivity RoHS : Compliant |
| 2,121 | ||
| 5-104450-3 | TE Connectivity | 04 MTE HDR SRST LATCH W/HLDWN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 4 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 4 | PCB Header & Receptacle | Part Number: 5-104450-3 | Internal Number: 5-104450-3 | TE Connectivity RoHS : Compliant |
| 1,151 | ||
| 104482-3 | TE Connectivity | 08 SHORT PT RCPT HSG DR .100CL Number of Positions: 8 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: Without Termination Method to Wire & Cable: Crimp Standard Rectangular Connector | 8 Receptacle Housing Without | Part Number: 104482-3 | Internal Number: 104482-3 | TE Connectivity RoHS : Compliant |
| 616 | ||
| 1-104482-4 | TE Connectivity | 32 SHORT PT RCPT HSG DR .100CL Number of Positions: 32 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: Without Termination Method to Wire & Cable: Crimp Standard Rectangular Connector | 32 Receptacle Housing Without | Part Number: 1-104482-4 | Internal Number: 1-104482-4 | TE Connectivity RoHS : Compliant |
| 123 | ||
| 2029104-4 | TE Connectivity | 4P MICRO MNL HDR ASY SR SIDE N PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 4 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 4 | PCB Header & Receptacle | Part Number: 2029104-4 | Internal Number: 2029104-4 | TE Connectivity RoHS : Compliant |
| 87 | ||
| DK-621-0440-4P | TE Connectivity | DK-621-0440-4P Data Bus Connector Type: Jack Data Bus Connector Style: Bayonet Polarization Code: D Contact Type: Pin Jack Bayonet D Pin | Data Bus Connector | Part Number: DK-621-0440-4P | Internal Number: 042871-000 | Alias Number: 9-1190328-1 | TE Connectivity RoHS : Compliant |
| 17 | ||
| 2273104-4 | TE Connectivity | M12 x 1.0 angled socket pigt SH 2 LED A Cable Assembly Type: M12 Pigtail Number of Positions: 4 Cable Assembly Length: 10 m Cable Assembly Length: 32.8 ft M8/M12 Application Type: Sensor/Actuator M12 Pigtail 4 10 m 32.8 ft | M12 A-Code Female R/a Led Pigtail | Part Number: 2273104-4 | Internal Number: 2273104-4 | TE Connectivity RoHS : Compliant |
| 10 | ||
| L001044-03 | TE Connectivity | 7P Veh,Ant,4x5G,2xWiFi,1xGNSS Antenna Type: Shark Fin Band Type: Multi Band Primary Application: Vehicular Communication Protocol: Vehicular Mounting Location: External Shark Fin Multi Band Vehicular | Antenna | Part Number: L001044-03 | Internal Number: L001044-03 | Alias Number: VFS61729B42L-530A | TE Connectivity RoHS : Compliant |
| 4 | ||
| L001044-02 | TE Connectivity | 8P Veh,Ant,4x5G,2xWiFi,1xGNSS,1xWhip Antenna Type: Shark Fin Band Type: Multi Band Primary Application: Vehicular Communication Protocol: Vehicular Mounting Location: External Shark Fin Multi Band Vehicular | Antenna | Part Number: L001044-02 | Internal Number: L001044-02 | Alias Number: VFE61729B42L-530Z | TE Connectivity RoHS : Compliant |
| 2 | ||
 Venkel Ltd. | CRN10-4-470JT | VENKEL LTD | Chip Resistor Array;CRN10;4;47R;�5%;Convex RoHS : Compliant | 30,000 | ||
| CRN10-4-471JT | VENKEL LTD | Chip Resistor Array;CRN10;4;470R;�5%;Convex RoHS : Compliant | 20,000 | |||
| TFCR0805-10W-K-1044BT | VENKEL LTD | Thin Film CR;0805;1/10W;�100PPM;1.04M;�0.1% RoHS : Compliant | 0 | |||
| CRN10-4-4992FT | VENKEL LTD | Chip Resistor Array;CRN10;4;49.9K;�1%;Convex RoHS : Compliant | 0 | |||
| TFCR2512-2W-E-1044FT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�25PPM;1.04M;�1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-K-1044CT | VENKEL LTD | Thin Film CR;2512;1/2W;�100PPM;1.04M;�0.25% RoHS : Compliant | 0 | |||
| CRN10-4-49R9FT | VENKEL LTD | Chip Resistor Array;CRN10;4;49.9R;�1%;Convex RoHS : Compliant | 0 | |||
| TFCR0805-10W-E-1044BT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�25PPM;1.04M;�0.1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-C-1044DT | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;1.04M;�0.5% RoHS : Compliant | 0 | |||
| TFCR2512-2W-E-1044CT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�25PPM;1.04M;�0.25% RoHS : Compliant | 0 | |||
| CRN10-4-4990FT | VENKEL LTD | Chip Resistor Array;CRN10;4;499R;�1%;Convex RoHS : Compliant | 0 | |||
| TFCR0805-10W-K-1044CT | VENKEL LTD | Thin Film CR;0805;1/10W;�100PPM;1.04M;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-10W-K-1044DT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�100PPM;1.04M;�0.5% RoHS : Compliant | 0 | |||
| TFCR1210-4W-K-1044BT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�100PPM;1.04M;�0.1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-K-1044CT | VENKEL LTD | Thin Film CR;1210;1/4W;�100PPM;1.04M;�0.25% RoHS : Compliant | 0 | |||
 Vyrian | 104450-1 | TE Connectivity | Board Connector, 2 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Latch, Black Insulator, Receptacle RoHS : Not Compliant | 12,704 | ||
| 81044/12-24-9 | TE Connectivity | Wire And Cable, 1 Conductor(s), 24AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 11,489 | |||
| 1-104482-7 | TE Connectivity | Board Connector, 38 Contact(s), 2 Row(s), Female, 0.1 inch Pitch, Crimp Terminal, Black Insulator, Receptacle RoHS : Compliant | 10,910 | |||
| 1-104480-2 | TE Connectivity | Connector Accessory, 0.025in Min Cable Dia, 0.06in Max Cable Dia, Contact, Copper Alloy RoHS : Compliant | 10,533 | |||
| 81044/13-24-5 | TE Connectivity | Wire And Cable, 1 Conductor(s), 24AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 10,412 | |||
| 74981104402 | Wurth Elektronik | Datacom Transformer, LAN Application(s), 1:1 | 10,058 | |||
| 1044847-1 | TE Connectivity | RF SSMA Connector, Female, Board Mount, Solder Terminal, Jack RoHS : Compliant | 8,925 | |||
| 81044/12-20-3 | TE Connectivity | Wire And Cable, 1 Conductor(s), 20AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 8,258 | |||
| 78215-1044 | Molex | Rectangular Power Connector, 4 Contact(s), Male, Press Fit Terminal RoHS : Compliant | 5,524 | |||
| 982661044 | Molex | Wire And Cable, 33 Conductor(s), 32AWG, 60V, Flat Cable RoHS : Compliant | 5,518 | |||
| 104426-2 | TE Connectivity | Board Connector, 4 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle RoHS : Not Compliant | 4,762 | |||
| 61083-104402LF | Amphenol Communications Solutions | Board Stacking Connector, 100 Contact(s), 2 Row(s), Male, Straight, 0.032 inch Pitch, Surface Mount Terminal, Locking, Natural Insulator, Plug | 4,587 | |||
| 87331-0441 | Molex | Board Connector, 4 Contact(s), 2 Row(s), Male, Straight, Solder Terminal RoHS : Not Compliant | 713 | |||
| 110440002 | Amphenol Corporation | Connector Accessory RoHS : Compliant | 546 | |||
| 81044/12-20-5 | TE Connectivity | Wire And Cable, 1 Conductor(s), 20AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 492 | |||
 Waytek, Inc. | 57440 OR 611-044 | Ideal Clamp Products Inc | Standard Stainless Steel Band Hose Clamp #44 Band 1/2" 1-1/4" TO 3-1/4" |
| 407 | |
 Win Source Electronics | TJA1044GT/3 | Nexperia | CAN Transceiver High-speed w/Standby SO8 |
| 116,900 | |
| TJA1044GT/3Z | Nexperia | IC TRANSCEIVER HALF 1/1 8SO |
| 90,000 | ||
| TJA1044GTK/3Z | Nexperia | IC TRANSCEIVER HALF 1/1 8HVSON |
| 60,000 | ||
| TCAN1044ADRBRQ1 | Texas Instruments | IC INTERFACE RoHS : Compliant |
| 60,000 | ||
| TCAN1044AVDRBRQ1 | Texas Instruments | ENHANCED AUTOMOTIVE CAN TRANSCEI RoHS : Compliant |
| 59,745 | ||
| TJA1044GTK | Nexperia | CAN Transceiver High-speed w/Standby SO8 |
| 42,000 | ||
| TC1044SEOA | Microchip Technology Inc | IC REG SWITCHD CAP INV 8SOIC RoHS : Compliant |
| 35,579 | ||
| TJA1044T | Nexperia | CAN 5Mbps Normal/Standby 5V Automotive 8-Pin SO |
| 31,150 | ||
ISO1044BDR | Texas Instruments | IC ISOLATION / 1/1 Transceiver Half CAN 8-SOIC RoHS : Compliant |
| 27,500 | ||
TUSB1044IRNQR | Texas Instruments | USB-C 10GBPS MULTI-PROT LINEAR R / Buffer, ReDriver 4 Channel 10Gbps 40-WQFN (6x4) RoHS : Compliant |
| 25,070 | ||
| TCAN1044AVDDFRQ1 | Texas Instruments | ENHANCED AUTOMOTIVE CAN TRANSCEI RoHS : Compliant |
| 12,600 | ||
| TCAN1044VDDFRQ1 | Texas Instruments | IC TRANSCEIVER 1/1 SOT23-8 RoHS : Compliant |
| 5,528 | ||
| MAX1044ESA+ | Maxim Integrated Products | IC REG SWTCHD CAP INV 20MA 8SOIC RoHS : Compliant |
| 5,000 | ||
| MAX1044ESA+T | Maxim Integrated Products | IC REG SWTCHD CAP INV 20MA 8SOIC RoHS : Compliant |
| 4,640 | ||
| ISOW1044BDFMR | Texas Instruments | LOW EMISSIONS, 5-KVRMS ISOLATED / 1/1 Transceiver Half CANbus 20-SOIC RoHS : Compliant |
| 3,400 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand