| Electronic Components Datasheet Search |
|
1037 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 2SA1037 | Luguang Electronic Technology Co Ltd | Transistor: PNP; bipolar; 60V; 0.15A; 0.2W; SOT23 |
| 1,395 | |
| 2J5083PW-300LL100W-C20GWST_CU010375 | 2J USA | Antenna: communication; 2G,3G,4G,5G,GSM,LTE; glued; 116x22x6.7mm |
| 407 | ||
| 4-103795-0 | TE Connectivity | Connector: pin strips; male; data; PIN: 80; soldering; 3A; angled RoHS : Not Compliant |
| 400 | ||
| 2J0C15W-868-C885G_CU010375 | 2J USA | Antenna: communication; ISM,LoRa,RF,SIGFOX,ZigBee; 2.5dBi |
| 163 | ||
| 1SNA110372R0600 | TE Connectivity | 1SNA110372R0600 |
| 120 | ||
| 173111-0378 | Molex | Enclosure for connectors: D-Sub; black; -35÷120°C |
| 50 | ||
| 037-1-037-D-X0F-RS0-1130 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 37; THT; straight |
| 0 | ||
| 087-1-037-0-F-XS0-1060 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 37; THT; straight RoHS : Compliant |
| 0 | ||
| 087-1-037-0-F-XS0-1470 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 37; THT; straight RoHS : Compliant |
| 0 | ||
| 087-1-037-0-T-XS0-1260 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 37; THT; straight RoHS : Compliant |
| 0 | ||
| 089-1-037-0-F-XS0-2280 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 37; THT; straight RoHS : Compliant |
| 0 | ||
| 090-1-037-0-F-XT0-1760 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 37; SMT; straight RoHS : Compliant |
| 0 | ||
| 090-1-037-0-T-XT0-1550 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 37; SMT; straight RoHS : Compliant |
| 0 | ||
| 098-1-037-0-NTX-YT0 | MPE-Garry GmbH | Connector: pin strips; socket; female; data; PIN: 37; SMT; vertical RoHS : Compliant |
| 0 | ||
| 1037340000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; OMNIMATE; 17.5A; 320V |
| 0 | ||
![]() Verical | 1037226 | Bossard Group | 1037226 |
| 44,400 | |
| 1037285 | Bossard Group | 1037285 |
| 24,000 | ||
| 1037293 | Bossard Group | 1037293 |
| 19,800 | ||
| 1037218 | Bossard Group | 1037218 |
| 18,000 | ||
| 103741-3 | TE Connectivity | Conn Unshrouded Header HDR 3 POS 2.54mm Solder ST Thru-Hole Carton RoHS : Not Compliant |
| 14,433 | ||
| 1037331 | Bossard Group | 1037331 |
| 8,000 | ||
| 1037528 | Bossard Group | 1037528 |
| 7,500 | ||
| 1037 | Keystone Electronics Corp | Conn Test Point 1 POS Solder ST Thru-Hole 1 Port |
| 5,167 | ||
| 10379 | Heyco | 10379 |
| 5,000 | ||
| 103741-3 | TE Connectivity | Conn Unshrouded Header HDR 3 POS 2.54mm Solder ST Thru-Hole Carton RoHS : Not Compliant |
| 4,463 | ||
| 103735-6 | TE Connectivity | Conn Shrouded Header HDR 7 POS 2.54mm Solder ST Thru-Hole Box RoHS : Not Compliant |
| 1,846 | ||
| 1037 | Keystone Electronics Corp | Conn Test Point 1 POS Solder ST Thru-Hole 1 Port |
| 1,695 | ||
| 103735-6 | TE Connectivity | Conn Shrouded Header HDR 7 POS 2.54mm Solder ST Thru-Hole Box RoHS : Not Compliant |
| 760 | ||
| 1037 | Zierick Manufacturing Corporation | 1037 |
| 450 | ||
| 103735-4 | TE Connectivity | Conn Shrouded Header HDR 5 POS 2.54mm Solder ST Thru-Hole Tube RoHS : Not Compliant |
| 105 | ||
![]() Avnet Americas | 4-103783-0-POS | TE Connectivity | 80 MODII HDR DRST B/A .100CL - Bulk (Alt: 4-103783-0-POS) RoHS : Not Compliant |
| 83,780 | |
| 53261-0371 | Molex | Pin Header, 3 Contacts, 1 Row, 1.25mm, Matte Tin, 1A, Right Angle, Shrouded, Phosphor Bronze, SMT RA - Tape and Reel (Alt: 0532610371) RoHS : Compliant |
| 49,600 | ||
| 4-103741-0-POS | TE Connectivity | 40 MODII HDR SRST B/A .100CL - Bulk (Alt: 4-103741-0-POS) RoHS : Not Compliant |
| 41,219 | ||
| ECS-160-10-37B2-RWM-TR | ECS International Inc | Crystal 16MHz 10pF 4-Pin SMD ECX-1637B2 T/R - Tape and Reel (Alt: ECS-160-10-37B2-RWM-TR) RoHS : Compliant |
| 6,000 | ||
| 5-103735-3 | TE Connectivity | - Rail/Tube (Alt: 5-103735-3) RoHS : Compliant |
| 5,820 | ||
| CRCW1210374RFKEA | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW1210374RFKEA) RoHS : Compliant |
| 5,000 | ||
| 5-103735-2 | TE Connectivity | Pin Header, Wire-to-Board, 2.54 mm, 1 Rows, 3 Contacts, Through Hole Straight, MTE - Rail/Tube (Alt: 5-103735-2) RoHS : Compliant |
| 3,697 | ||
| 103735-2 | TE Connectivity | - Rail/Tube (Alt: 103735-2) RoHS : Not Compliant |
| 2,451 | ||
| 5-103735-4 | TE Connectivity | - Rail/Tube (Alt: 5-103735-4) RoHS : Compliant |
| 2,046 | ||
| 5-103735-1 | TE Connectivity | - Rail/Tube (Alt: 5-103735-1) RoHS : Compliant |
| 1,912 | ||
| 330-5291-037 | ITT Interconnect Solutions | - Bulk (Alt: 330-5291-037) RoHS : Compliant |
| 1,200 | ||
| 103783-7 | TE Connectivity | - Bulk (Alt: 103783-7) RoHS : Not Compliant | 950 | |||
| 103735-3 | TE Connectivity | Conn Shrouded Header HDR 4 POS 2.54mm Solder ST Thru-Hole Tube - Rail/Tube (Alt: 103735-3) RoHS : Not Compliant |
| 907 | ||
| 5-103735-8 | TE Connectivity | - Rail/Tube (Alt: 5-103735-8) RoHS : Compliant |
| 798 | ||
| 4-103741-0 | TE Connectivity | - Bulk (Alt: 4-103741-0) RoHS : Not Compliant |
| 89 | ||
![]() Arrow Electronics | 103741-3 | TE Connectivity | Conn Unshrouded Header HDR 3 POS 2.54mm Solder ST Thru-Hole Carton RoHS : Not Compliant |
| 14,433 | |
| 103735-6 | TE Connectivity | Conn Shrouded Header HDR 7 POS 2.54mm Solder ST Thru-Hole Box RoHS : Not Compliant |
| 1,846 | ||
| 103735-7 | TE Connectivity | Conn Shrouded Header HDR 8 POS 2.54mm Solder ST Thru-Hole Box RoHS : Not Compliant |
| 869 | ||
| 103735-4 | TE Connectivity | Conn Shrouded Header HDR 5 POS 2.54mm Solder ST Thru-Hole Tube RoHS : Not Compliant |
| 137 | ||
| 103735-1 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 2 POS 2.54mm Solder ST Thru-Hole Tube RoHS : Not Compliant |
| 82 | ||
| 103749-E | TE Connectivity | Conn Hard Metric HDR 55Signal/22Ground POS 2mm Press Fit ST Thru-Hole RoHS : Compliant |
| 42 | ||
![]() Newark | 10810375 | Aptiv PLC | Automotive Contact, Socket, Crimp; |Aptiv/delphi 10810375 RoHS : Compliant |
| 9,751 | |
| 10810375 | Aptiv PLC | Automotive Contact, Socket, Crimp; |Aptiv/delphi 10810375 RoHS : Compliant |
| 9,751 | ||
| 5-103735-1 | TE Connectivity | Wire-To-Board Connector, Ampmodu Mte Ser; |Te Connectivity Amp 5-103735-1 RoHS : Compliant |
| 2,014 | ||
| T4041037041-000 | TE Connectivity | Sensor Connector, M8, Rcpt, 4Pos, Panel; |Te Connectivity T4041037041-000 RoHS : Compliant |
| 1,423 | ||
| 860010375015 | Wurth Elektronik | Cap, 680?f, 16V, 20%; |Würth Elektronik 860010375015 RoHS : Compliant |
| 598 | ||
| 2325103-7 | TE Connectivity | Automotive Conn, Hdr, 2Pos, 10A; |Te Connectivity 2325103-7 RoHS : Compliant |
| 405 | ||
| 2325103-7 | TE Connectivity | Automotive Conn, Hdr, 2Pos, 10A; Product Range:Enetseal+ Series; Automotive Connector Shell Style:Panel Mount Header; No. Of Contacts:2Contacts; Automotive Contact Type:Solder Pin; Contact Material:Copper Alloy; Contact Plating:Gold Rohs Compliant: Yes RoHS : Compliant |
| 405 | ||
| ESQ-110-37-G-D | Samtec Inc | Socket, 2.54Mm, Vertical Tht, 20Way; |Samtec, Inc. ESQ-110-37-G-D RoHS : Compliant |
| 59 | ||
| 860010378021 | Wurth Elektronik | Cap, 2200?f, 16V, 20%; |Würth Elektronik 860010378021 RoHS : Compliant |
| 41 | ||
| FMCA1037-12 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 12", 305Mm; |Fairview Microwave FMCA1037-12 RoHS : Compliant |
| 16 | ||
| FMTC103-72 | Fairview Microwave Inc | |Fairview Microwave FMTC103-72 RoHS : Compliant |
| 9 | ||
| 10370H1 | Eaton Cutler-Hammer | General Purpose Solenoid; |Eaton Cutler Hammer 10370H1 RoHS : Not Compliant |
| 8 | ||
| 64.1037-05029 | Stäubli Electrical Connectors | Copper Conductor, 1Kv, 32A, White; |Staubli 64.1037-05029 RoHS : Compliant |
| 1 | ||
| 1037 | Keystone Electronics Corp | Connector, Test Point, Through Hole; |Keystone 1037 RoHS : Compliant |
| 0 | ||
| 1037 | Cooper Crouse-Hinds | 2 1/2 Threaded Bushing Insulated; |Crouse-Hinds 1037 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | LT1037CN8#PBF | Analog Devices Inc | L N, Hi Speed Prec Op Amps RoHS : Compliant |
| 7,384 | |
| MAX1037EKA+T | Analog Devices Inc | 2.7V to 5.5V, Low-Power, 4-/12 RoHS : Compliant |
| 1,718 | ||
| LT1037ACN8#PBF | Analog Devices Inc | L N, Hi Speed Prec Op Amps RoHS : Compliant |
| 1,511 | ||
| LT1037CS8#TRPBF | Analog Devices Inc | L N, Hi Speed Prec Op Amps RoHS : Compliant |
| 327 | ||
| LT1037IN8#PBF | Analog Devices Inc | L N, Hi Speed Prec Op Amps RoHS : Compliant |
| 212 | ||
| LT1037CS8#PBF | Analog Devices Inc | L N, Hi Speed Prec Op Amps RoHS : Compliant |
| 68 | ||
| DC1037A | Analog Devices Inc | LT3470EDDB - Micropower Buck R RoHS : Compliant |
| 47 | ||
| LT1037IS8#PBF | Analog Devices Inc | L N, Hi Speed Prec Op Amps RoHS : Compliant |
| 1 | ||
| LT1037IS8#TRPBF | Analog Devices Inc | L N, Hi Speed Prec Op Amps RoHS : Compliant |
| 0 | ||
| MAX1037EKA+ | Analog Devices Inc | 2.7V to 5.5V, Low-Power, 4-/12 RoHS : Compliant | 0 | |||
![]() RS | 1037088 (PTTBS 2 5 BN) | Phoenix Contact | DOUBLE-LEVEL TERM BLOCK PUSH IN;PTTBS 2 5 BN |
| 43 | |
| GGM1-6/10 (X1037780) | Mersen Electrical Power | FUSE, FAST ACTING, ELECTRONIC, GLASS, 10KA, 250VAC, 1-6/10A |
| 15 | ||
| GDL1/2 (K1037677) | Mersen Electrical Power | FUSE, MIDGET, TIME-DELAY, GLASS BODY, 5X20MM, I.R. 1, 250V, .5A |
| 14 | ||
| 1037637 | RS Pro | 4MM PLOG 7MM CABLE RED SOLDER 10A 50V STAINLESS STEEL NICKEL PLATED |
| 13 | ||
| GDL6/10 (L1037678) | Mersen Electrical Power | FUSE, TIME DELAY, ELECTRONIC, GLASS, 10KA, 250VAC, 6/10A |
| 5 | ||
| 1SNA103762R0300 (010376203) | TE Connectivity | PF13.0 END PLATE ORANGE, ENTRELEC |
| 5 | ||
| AFM60B-S4AA004096 (1037777) | SICK AG | ABSOLUTE ENCODER, 12BIT, MALE CONN, RADIAL, GRAY, SOL SHAFT, FACE MNT FLNG, 10MM |
| 5 | ||
| 410371 | RS Pro | INDUSTRIAL POWER PLUG , WALL MOUNT, RIGHT ANGLE 32A, 415V, IP66 & IP67, RED |
| 3 | ||
| DFS60E-BEEL00250 (1037183) | SICK AG | INCREMENTAL ENCODER, 250 PPR, 12 MM DIA. METAL SHAFT, 10-32 V, 3 M CABLE |
| 2 | ||
| GAB1 (X1037757) | Mersen Electrical Power | FUSE, MIDGET, FAST ACTING, CERAMIC, PC MOUNT, 10KA, 250VAC, 1A |
| 1 | ||
| FG4-LH10.375.11 | Davies Molding LLC | FUNCTIONAL HANDLE - LED HANDLE LEDGE, NO PUSH BUTTON |
| 1 | ||
| 1037 | RACO | KNOCKOUT SEAL 2-1/2" 2PC STEEL |
| 0 | ||
| 1037 | Keystone Electronics Corp | PC SLOTTED TEST POINT, THRU-HOLE MOUNT, TIN PLATE, BRASS RoHS : Compliant |
| 0 | ||
| 1037 | Lincoln Industrial Corporation | GUN, LEVER |
| 0 | ||
| 1037 | Adafruit Industries | ADAFRUIT PIBOW - ENCLOSURE FOR RASPBERRY PI MODEL B COMPUTERS |
| 0 | ||
![]() Microchip Technology Inc | B10377 | Microchip Technology Inc | MOST25 oPHY 2+0 PhyPlus OS81060, Projected EOL: - Contact for Pricing | 0 | ||
| B10378 | Microchip Technology Inc | MOST25 oPHY 2+0 PhyPlus OS81050, Projected EOL: - Contact for Pricing | 0 | |||
| B10379 | Microchip Technology Inc | MOST50 ePHY Plus OS81082, Projected EOL: - Contact for Pricing | 0 | |||
| 5962-2221037QZC | Microchip Technology Inc | RTPF500ZT-LG1509B, Projected EOL: 2051-06-23 - Contact for Pricing | 0 | |||
| DSC1001DI1-037.1250 | Microchip Technology Inc | MEMS OSC, LVCMOS, 37.125MHz, 50ppm, 1.8-3.3V, -40 to 85C, 2.5x2.0mm, VDFN, Projected EOL: 2051-09-30 RoHS : Compliant |
| 0 | ||
| DSC1001DL1-037.1250 | Microchip Technology Inc | MEMS OSC, LVCMOS, 37.125MHz, 50PPM, 1.8-3.3V, -40 to 105C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-08-12 RoHS : Compliant |
| 0 | ||
DSC1001CE1-037.1250![]() | Microchip Technology Inc | MEMS OSC, LVCMOS, 37.125MHz, 50PPM, 1.8-3.3V, -20 to 70C, 3.2 x 2.5mm, VDFN, Projected EOL: 2040-11-24 RoHS : Compliant |
| 0 | ||
| VXM9-1037-26M0000000 | Microchip Technology Inc | Crystal Oscillator, 2.0x1.6mm, -40C to +125C, 20ppm, 26MHz, UDFN, Projected EOL: 2050-11-24 RoHS : Compliant |
| 0 | ||
| DSC1001DI1-037.1250T | Microchip Technology Inc | MEMS OSC, LVCMOS, 37.125MHz, 50ppm, 1.8-3.3V, -40 to 85C, 2.5x2.0mm, VDFN, Projected EOL: 2051-09-30 RoHS : Compliant |
| 0 | ||
| DSC1001DL1-037.1250T | Microchip Technology Inc | MEMS OSC, LVCMOS, 37.125MHz, 50PPM, 1.8-3.3V, -40 to 105C, 2.5 x 2.0mm, VDFN, Projected EOL: 2051-09-12 RoHS : Compliant |
| 0 | ||
| DSC1001CE1-037.1250T | Microchip Technology Inc | MEMS OSC, LVCMOS, 37.125MHz, 50PPM, 1.8-3.3V, -20 to 70C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-02-12 RoHS : Compliant |
| 0 | ||
| VXM9-1037-26M0000000TR | Microchip Technology Inc | Crystal Oscillator, 2.0x1.6mm, -40C to +125C, 20ppm, 26MHz, UDFN, Projected EOL: 2050-11-24 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 1037 | Keystone Electronics Corp | RoHS : Compliant | 6,862 | ||
| 1037 | Zierick Manufacturing Corporation | 450 | ||||
| A-55485/01-037D | AA/CID Mounting Pads | 278 | ||||
| FW-0171-0375-093-NY-NAT | WASHERS | 200 | ||||
| 103747-3 | TE Connectivity | RoHS : Not Compliant | 190 | |||
| BR6981-0.375-34 | Lyn-Tron Inc | 136 | ||||
| AR-5131-037 | Misc. Retaining Ring | 80 | ||||
| 1037-125-SS-26 | RAF Electronic Hardware | 74 | ||||
| 10376 | Unbrako Group | 40 | ||||
| 10375D | Micro Dimensional Products Inc | 30 | ||||
| BS10379-3A | MISC. INDUSTRIAL HRD | 15 | ||||
| CA21037CL-4R | Alcoa Fastening Systems Aerospace | 11 | ||||
| 1037-125-SS | RAF Electronic Hardware | 4 | ||||
| 5610-37-93 | Seastrom Mfg | 3 | ||||
| B4-50-103-75 | Southco | Pull, Small Size, M4 Thread, Aluminum, Silver |
| 2 | ||
![]() Future Electronics | 1037 | Keystone Electronics Corp | Through Hole Brass Tin Plate PC Loop .433 inch Long Test Point RoHS : Compliant |
| 0 | |
![]() Onlinecomponents.com | 1037 | Cooper Crouse-Hinds | 1037 RoHS : Compliant |
| 0 | |
| 15268-1037 | Molex | 1.25mm Pitch Premo-Flex™ FFC Jumper, Same Side Contacts (Type A), 33 Circuits, 0.102m Cable Length, 0.27mm Cable Thickness, Tin (Sn) Plating RoHS : Compliant |
| 0 | ||
| 501330-1037 | Molex | Board Connector 10 Contact(s) 1 Row(s) Female RoHS : Compliant |
| 0 | ||
| 078209-1037 | ITT Interconnect Solutions | CIRCULAR |
| 0 | ||
| 1037-26 | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 1037-14 | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 170390-1037 | Molex | RoHS : Compliant |
| 0 | ||
| 1037-8 | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 1037-36 | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 1037-11 | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 68304-1037 | Molex | CUSTOM HDR 100 DUAL BODY 3CKT TIN RoHS : Compliant |
| 0 | ||
| 1037-56 | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 132039-1037 | ITT Interconnect Solutions | Circular Plastic Push Pull Straight Plug w/Cable Gray 7 Pin 5 A PLA Series | ITT Cannon PLA1G022J07 RoHS : Compliant |
| 0 | ||
| 1037-29 | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 1037-13 | E-Z-Hook | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | JM38510/37204BRA![]() | Texas Instruments | Bus Driver, ALS Series, 8-Func, 8-Bit, True Output, TTL, CDIP20 RoHS : Not Compliant |
| 287 | |
JM38510/37301BCA![]() | Texas Instruments | NOR Gate, ALS Series, 4-Func, 2-Input, TTL, CDIP14 RoHS : Not Compliant |
| 13 | ||
| SN103758N | Texas Instruments | LOW PWR LINCMOS OP AMPS(ORDER TLC2654CN) RoHS : Not Compliant |
| 641 | ||
JM38510/37101B2A![]() | Texas Instruments | D Flip-Flop, ALS Series, 2-Func, Positive Edge Triggered, 1-Bit, Complementary Output, TTL, CQCC20 RoHS : Not Compliant |
| 164 | ||
JM38510/37203B2A![]() | Texas Instruments | Bus Driver, ALS Series, 8-Func, 8-Bit, True Output, TTL, CQCC20 RoHS : Not Compliant |
| 77 | ||
LT1037ACP![]() | Texas Instruments | Operational Amplifier, 1 Func, 50uV Offset-Max, BIPolar, PDIP8 RoHS : Not Compliant |
| 6,247 | ||
| SN103756N | Texas Instruments | ANALOG INTERFACE RoHS : Not Compliant |
| 31,764 | ||
MAX1037MEKA![]() | Maxim Integrated Products | MAX1037 2.7V To 3.6V, Low-Power, 4-Channel 2-Wire Serial 8-Bit ADC |
| 1,038 | ||
R5F10377DNA#U0![]() | Renesas Electronics Corporation | IC MCU RL78 16Bit 1 Core FLASH 4kB (4k x 8) 24MHz 24-QFN Tray RoHS : Compliant |
| 704 | ||
| R5F10378ANA#W5 | Renesas Electronics Corporation | IC MCU RL78 16Bit 1 Core FLASH 8kB (8k x 8) 24MHz 24-QFN T/R RoHS : Compliant |
| 10,000 | ||
R5F1037AANA#U0![]() | Renesas Electronics Corporation | IC MCU RL78 16Bit 1 Core FLASH 16kB (16k x 8) 24MHz 24-QFN Tray RoHS : Compliant |
| 1,000 | ||
| R5F1037AANA#U5 | Renesas Electronics Corporation | IC MCU RL78 16Bit 1 Core FLASH 16kB (16k x 8) 24MHz 24-QFN Tray RoHS : Compliant |
| 6,923 | ||
R5F1037ADNA#U0![]() | Renesas Electronics Corporation | Microcontroller, 16-Bit, FLASH, RL78 CPU, 24MHz, CMOS, PQCC24 RoHS : Compliant |
| 5 | ||
| R5F1037ADNA#U5 | Renesas Electronics Corporation | Microcontroller, 16-Bit, FLASH, RL78 CPU, 24MHz, CMOS, PQCC24 RoHS : Compliant |
| 2,092 | ||
| 546CAA001037BAG | Skyworks Solutions Inc | CRYSTAL OSC XO (Standard) CMOS 20.97152MHz, 52.4288MHz 1.71V ~ 3.465V ±20ppm 6-SMD Tape RoHS : Compliant |
| 50 | ||
![]() Sager | 1037 | Keystone Electronics Corp | Test Plugs & Test Jacks PCB TEST POINT RoHS : Compliant |
| 0 | |
| 1037 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding RFSB,W,5.4 | 0 | |||
| 1731071037 | Molex | FCT ML DSUB RCPT 3W3 W/CLINCH RoHS : Compliant |
| 0 | ||
| 103741-3 | TE Connectivity | Headers & Wire Housings 3P 1 ROW VERT HEADER RoHS : Not Compliant | 0 | |||
| 2325103-7 | TE Connectivity | Headers & Wire Housings 2POS,TAB1.2X0.6,HDR ASSY,180DEG,SLDR RoHS : Compliant |
| 0 | ||
| 2623103700 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding SLMT,STR,BF,CTL | 0 | |||
| 3742610373 | TE Connectivity | SPEED SEN DSS 1210.15 P9HV |
| 0 | ||
| DW-25-13-T-D-1037 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| SEAC-020-10-37.3-TU-TU | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant |
| 0 | ||
| CA2-X0-11-037-222-D | Carling Technologies | Circuit Breakers | 0 | |||
| 851-91-037-20-001000 | Mill-Max Mfg Corp | IC & Component Sockets STANDARD SOCKET HEADER | 0 | |||
| 9754221037 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9860621037 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| ACC1037 | HellermannTyton | Electrical Enclosure Accessories Pole/Wall Mounting Bracket Kit for FRBU/FST, 1/pkg | 0 | |||
| CH06-0261-037 | TE Connectivity | TE Connectivity | 0 | |||
![]() Ameya Holding Limited | 2SA1037AKT146Q![]() | ROHM Semiconductor | General Purpose Amplification Transistor RoHS : Compliant |
| 8,850 | |
| MAX1037EKA+T | Analog Devices Inc | MAX1037 Series 3.6 V 4 Channels 8-Bit I2C Interface SMT A/D Converter - SOT-23-8 RoHS : Compliant | 6,295 | |||
2SA1037AKT146R![]() | ROHM Semiconductor | General Purpose Amplification Transistor RoHS : Compliant |
| 2,970 | ||
![]() ComSIT USA | 2SA1037AKT146R![]() | ROHM Semiconductor | General purpose Transistor (-50V, -150 milli Amp) Small Signal Bipolar Transistor, 0.15A I(C), 50V V(BR)CEO, 1-Element, PNP, Silicon RoHS : Compliant | 12,000 | ||
| KX1221037 | Kionix Inc | +/- 2G / 4G / 8G TRI-AXIS DIGITAL ACCELEROMETER SPECIFICATIONS Analog Circuit, 1 Func, PBGA12 RoHS : Compliant | 10,000 | |||
| 532610371 | Molex | Board Connector, 3 Contact(s), 1 Row(s), Male, Right Angle, Surface Mount Terminal RoHS : Compliant | 3,000 | |||
| 51037351 | TE Connectivity | HDR ASSY, VERT, SINGLE ROW 2.54[.100] CL, .064[.025] SQ POST, WITH PLZN & LATCHING, AMPMODU MTE Board Connector, 2 Contact(s), 1 Row(s), Male, Straight, Solder Terminal, Black Insulator RoHS : Compliant | 307 | |||
| 51037352 | TE Connectivity | HDR ASSY, VERT, SINGLE ROW 2.54[.100] CL, .064[.025] SQ POST, WITH PLZN & LATCHING, AMPMODU MTE Board Connector, 3 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Latch, Black Insulator, Plug RoHS : Compliant | 255 | |||
| 111037031 | TE Connectivity | D-Sub Connectors RoHS : Not Compliant | 80 | |||
| UPD71037CZ10 | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 50 | |||
![]() Interstate Connecting Components | 2325103-7 | TE Connectivity | PCB TH MT HDR,2P VERT,FLNGD, CD A,SEALBL,enetSEAL+ RoHS : Compliant |
| 101 | |
| 3742610373 | TE Connectivity | SPEED SEN DSS 1210.15 P9HV | 0 | |||
| SCE2B06K1037SA | Amphenol PCD | TERRAPIN | 0 | |||
| SCE2B76A1037SA001 | Amphenol PCD | TERRAPIN | 0 | |||
| SCE2ZN71A1037PN002 | Amphenol PCD | TERRAPIN | 0 | |||
| SCE2ZN76A1037SD002981 | Amphenol PCD | TERRAPIN | 0 | |||
| 670-001H01-103-7.5 | Glenair Inc | PROTECTIVE COVER & ATTACH | 0 | |||
| 801-037-01C7-10PB | Glenair Inc | 0 | ||||
| 801-037-01M6-4PD | Glenair Inc | 0 | ||||
| 801-037-01NF6-4BA | Glenair Inc | 0 | ||||
| 801-037-01ZN6-7SA | Glenair Inc | 0 | ||||
| 801-037-01ZN7-10AD | Glenair Inc | 0 | ||||
| 801-037-01ZNU7-10SA | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-037-02M6-7AC | Glenair Inc | 0 | ||||
| 801-037-02M7-10SD | Glenair Inc | 0 | ||||
![]() NexGen Digital | 2-103777-5 | TE Connectivity | RoHS : Not Compliant | 85 | ||
| 103747-2 | TE Connectivity | RoHS : Not Compliant | 12 | |||
![]() PEI Genesis | 330-5291-037 | ITT Interconnect Solutions | RoHS : Compliant |
| 1,151 | |
| 160X10379X | Amphenol Corporation |
| 400 | |||
| 1037-4GW8 | HellermannTyton |
| 143 | |||
![]() Powell Electronics | 4-103747-0 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 13,736 | |
| EC1037-000 | TE Connectivity | Labels and Industrial Warning Signs RoHS : Compliant |
| 6,600 | ||
| 103741-3 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 2,946 | ||
| 5-103735-1 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 2,848 | ||
| 5-103765-8 | TE Connectivity | Connectors RoHS : Compliant |
| 1,850 | ||
| 4-103759-0 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 1,310 | ||
| 1-103735-7 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 490 | ||
| 5-103735-8 | TE Connectivity | TE COMPONENT (REF 5-103735-8) RoHS : Compliant |
| 402 | ||
| 61082-103700LF | Amphenol FCi | Cable Assembly |
| 343 | ||
| 4-103795-0 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 314 | ||
| ESQ-110-37-G-D | Samtec Inc | .100 PC104 Elevated Skt Strip RoHS : Compliant |
| 39 | ||
| 2103773-1 | TE Connectivity | Connectors |
| 14 | ||
| 1-1103705-1 | TE Connectivity | Connectors |
| 2 | ||
| 103775-000 | TE Connectivity | connector accessories RoHS : Not Compliant |
| 2 | ||
| RP10377G1 | CII Guardian | MIL/AERO RELAY RP10377G1 |
| 1 | ||
![]() Richardson RFPD | 910-3737-012 | Teledyne Storm Microwave | RF STD CABLE ASSY RoHS : Compliant |
| 97 | |
| VF901037-66.67MHZ | CTS Corporation | OSCILLATOR CRYSTAL | 0 | |||
| LT1037IN8#PBF | Analog Devices Inc | Op Amp Single Low Noise Amplifier ±22V 8-Pin PDIP RoHS : Compliant |
| 0 | ||
| R191037000 | Radiall | Conn PC7-BMA Adapter 0Hz to 18GHz 50Ohm ST PL/PL G RoHS : Not Compliant |
| 0 | ||
| 5-103735-1 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 2 POS 2.54mm So RoHS : Compliant | 0 | |||
| PSLSU120X-110-37V | Wall Industries Inc | 120 Watts, AC/DC LED Power Supplies RoHS : Compliant | 0 | |||
| 103706-HMC253QS24 | Analog Devices Inc | HMC253QS24/HMC253QS24E RF Switch Evaluation Board RoHS : Compliant | 0 | |||
| SI5338C-B10375-GMR | Skyworks Solutions Inc | Quad Clock Generator RoHS : Compliant | 0 | |||
| WP7603-1_1103727 | Sierra Wireless | 4G/LTE EMBED CEL MOD RoHS : Compliant | 0 | |||
| SI5338M-B11037-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 200MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| 850-1037-020 | CTS Corporation | OSCILLATOR CRYSTAL | 0 | |||
| LT1037IS8#PBF | Analog Devices Inc | Op Amp Single Low Noise Amplifier ±22V 8-Pin SOIC RoHS : Compliant |
| 0 | ||
| R161037020 | Radiall | Conn Type N PL 0Hz to 11GHz 50Ohm Crimp ST Cable M RoHS : Not Compliant |
| 0 | ||
| 02561037-000 | TE Connectivity | Premium performance 12mm diameter AC LVDT RoHS : Compliant |
| 0 | ||
| DC1037A | Analog Devices Inc | Power Demonstration circuit RoHS : Compliant |
| 0 | ||
![]() Rutronik | 44440022 INSUL. 1037 | Hong Kong X'Tals Ltd | INSULATOR FOR HC49 - SERIE RoHS : Compliant |
| 120,000 | |
| 532610371 | Molex | 03 P HEADER SHROUDED 90° SMT RoHS : Compliant |
| 38,400 | ||
| L2SA1037AKRLT1G | LRC Leshan Radio Co Ltd | DIGI-TRANS. 0,323W SOT23 RoHS : Compliant |
| 30,000 | ||
![]() Chip 1 Exchange | ECS-400-10-37B-CKY-TR | INSTOCK | 32,343 | |||
| 2SA1037AK T146R | ROHM Semiconductor | INSTOCK | 11,940 | |||
| 160X10379X | Conec Corporation | INSTOCK RoHS : Compliant | 3,900 | |||
DSC1001CE1-037.1250![]() | Microchip Technology Inc | INSTOCK RoHS : Compliant | 3,521 | |||
| 2SA1037AK | ROHM Semiconductor | INSTOCK RoHS : Compliant | 3,000 | |||
| 2SA1037AKKFRAT146 | INSTOCK | 2,755 | ||||
| AD71037YSTZRL | AD E | INSTOCK | 676 | |||
| PM-T1037 | INSTOCK | 298 | ||||
| 710103700-100-G | INSTOCK | 288 | ||||
| D71037CZ-10 | NECEL | INSTOCK | 139 | |||
| 821-037 | INSTOCK | 50 | ||||
| LT1037ACP | INSTOCK | 50 | ||||
| 103777-5 | INSTOCK | 50 | ||||
| 53261-0371 | Molex | INSTOCK RoHS : Compliant | 10 | |||
| 171-037-213R001 | INSTOCK | 8 | ||||
![]() Avnet Abacus | ECS-160-10-37-JGP-TR | ECS International Inc | Crystal Standard 16 MHz SMD 2mm x 16mm x 045mm 30 ppm 10 pF 20 ppm ECX1637 - Tape and Reel (Alt: ECS-160-10-37-JGP-TR) RoHS : Compliant | 120,000 | ||
| 532610371 | Molex | Pin Header Right Angle Signal WiretoBoard 125 mm 1 Rows 3 Contacts - Tape and Reel (Alt: 532610371) RoHS : Compliant | 108,800 | |||
| 5-103735-3 | TE Connectivity | Pin Header WiretoBoard 254 mm 1 Rows 4 Contacts Through Hole MTE (Alt: 5-103735-3) RoHS : Compliant | 21,798 | |||
| 5-103735-1 | TE Connectivity | Pin Header WiretoBoard 254 mm 1 Rows 2 Contacts Through Hole Straight MTE (Alt: 5-103735-1) RoHS : Compliant | 13,703 | |||
| 529010374 | Molex | - Tape and Reel (Alt: 529010374) RoHS : Compliant | 2,200 | |||
| 550910374 | Molex | Conn Stacking Header 30 POS 6mm and 12mm Stack Height 0635mm Solder ST Surface Mount - Tape and Reel (Alt: 550910374) RoHS : Compliant | 2,000 | |||
| ECS-250-10-37B-CTN-TR | ECS International Inc | Crystal 25 MHz SMD 2mm x 16mm 20 ppm 10 pF 10 ppm ECX1637B Series - Tape and Reel (Alt: ECS-250-10-37B-CTN-TR) RoHS : Compliant | 2,000 | |||
| T4041037041-000 | TE Connectivity | Sensor Connector M8 Female 4 Positions PCB Socket Straight Panel Mount (Alt: T4041037041-000) RoHS : Compliant | 900 | |||
| 1910377 | Phoenix Contact | FKC 25 4ST FKC254ST (Alt: 1910377) RoHS : Compliant | 300 | |||
| 1037710000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1037710000) RoHS : Compliant | 100 | |||
| 1037403 | Phoenix Contact | MCDN 15 3G135 P26 THRR32 MCDN153G135P26THRR32 (Alt: 1037403) RoHS : Compliant | 0 | |||
| 1037485 | Phoenix Contact | SMKDS 11435 BD310 SMKDS11435BD310 (Alt: 1037485) RoHS : Compliant | 0 | |||
| 2325103-7 | TE Connectivity | Connector Shrouded Header 2 Position 254mm Solder Straight Through Hole (Alt: 2325103-7) RoHS : Compliant | 0 | |||
| 5-1102103-7 | TE Connectivity | HA3STW111ZSO (Alt: 5-1102103-7) RoHS : Compliant | 0 | |||
ECS-400-10-37Q-ES-TR![]() | ECS International Inc | - Tape and Reel (Alt: ECS-400-10-37Q-ES-TR) RoHS : Compliant | 0 | |||
![]() Avnet Asia | ECS-400-10-37B-CKY-TR | ECS International Inc | (Alt: ECS-400-10-37B-CKY-TR) RoHS : Compliant | 0 | ||
| T4041037031-000 | TE Connectivity | (Alt: T4041037031-000) RoHS : Compliant | 0 | |||
| 0550910374 | Molex | Mezzanine Connector, Plug, 30 Contacts, 2 Rows, 0.635mm, Gold, SMT, Straight, Copper Alloy, Solder (Alt: 0550910374) RoHS : Compliant | 0 | |||
| 3-103-712 | Schurter Electronic Components | (Alt: 3-103-712) RoHS : Compliant | 0 | |||
| ECS-271.2-10-37-CKM-TR | ECS International Inc | (Alt: ECS-271.2-10-37-CKM-TR) RoHS : Compliant | 0 | |||
2SA1037AKT146Q![]() | ROHM Semiconductor | Trans GP BJT PNP 50V 0.15A 3-Pin SMT T/R (Alt: 2SA1037AKT146Q) RoHS : Compliant | 0 | |||
| 5-103735-2 | TE Connectivity | Pin Header, Wire-to-Board, 2.54 mm, 1 Rows, 3 Contacts, Through Hole Straight, MTE (Alt: 5-103735-2) RoHS : Compliant |
| 0 | ||
| NB10372001 | TE Connectivity | Cable Accessories Heat Shrinkable Tubing Polyolefin Black Stick (Alt: NB10372001) RoHS : Compliant |
| 0 | ||
| 951103-7622-AR | 3M Interconnect | (Alt: 951103-7622-AR) RoHS : Compliant | 0 | |||
| ECS-400-10-37B-CKY-TR3 | ECS International Inc | (Alt: ECS-400-10-37B-CKY-TR3) RoHS : Compliant |
| 0 | ||
| X1E000021037500 | Epson Electronics America Inc | (Alt: X1E000021037500) RoHS : Compliant | 0 | |||
ECS-250-10-37Q-ES-TR![]() | ECS International Inc | (Alt: ECS-250-10-37Q-ES-TR) RoHS : Compliant | 0 | |||
| 5600201037 | Molex | (Alt: 5600201037) RoHS : Compliant | 0 | |||
| ECS-400-10-37-CWN-TR | ECS International Inc | (Alt: ECS-400-10-37-CWN-TR) RoHS : Compliant | 0 | |||
| ECS-250-10-37BQ-CTN-TR | ECS International Inc | (Alt: ECS-250-10-37BQ-CTN-TR) RoHS : Compliant | 0 | |||
![]() Avnet Silica | A10376 | Antenova M2M | Amia Cellular SMD Antenna (Alt: A10376) RoHS : Compliant | 0 | ||
| SI311103757 | 2J USA | Black Screw Mount 5G1 Tube (Alt: SI311103757) RoHS : Compliant | 0 | |||
| OM11037,598 | NXP Semiconductors | LPC3141 32Bit ARM Based Microcontroller Evaluation Board (Alt: OM11037,598) RoHS : Compliant | 0 | |||
| KX122-1037-FR | ROHM Semiconductor | Accelerometer Triple 2g4g8g 171V to 36V 4096Countg8192Countg16384Countg 12Pin LGA (Alt: KX122-1037-FR) RoHS : Compliant | 0 | |||
| R5F10377ANA#05 | Renesas Electronics Corporation | (Alt: R5F10377ANA#05) RoHS : Compliant | 0 | |||
DSC1001CE1-037.1250![]() | Microchip Technology Inc | (Alt: DSC1001CE1-037.1250) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | 410370 | Septentrio NV | AsteRx SBi3 Pro+ |
| 0 | |
| CAB.01037 | Taoglas Antenna Solutions | Hirose U.FL to 250mm 1.13 to SMA(F)BKST |
| 0 | ||
| 410372 | Septentrio NV | AsteRx-i3 D evaluation kit unit is a bundle designed to provide a complete setup for GNSS operations |
| 0 | ||
![]() Component Electronics, Inc | 1037 | Keystone Electronics Corp | IN STOCK SHIP TODAY RoHS : Compliant |
| 7,335 | |
| CR10-37R4FM | TAD Electronics Ltd | IN STOCK SHIP TODAY |
| 3,000 | ||
| 1-103783-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,822 | ||
| 103747-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 350 | ||
| 53261-0371 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 290 | ||
| 103747-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 170 | ||
| 1201037A00E-000 | Delta Electronics Inc | IN STOCK SHIP TODAY |
| 148 | ||
| 2SA1037KR | ROHM Semiconductor | IN STOCK SHIP TODAY |
| 50 | ||
| 103783-8 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 50 | ||
2SA1037AKT146Q![]() | ROHM Semiconductor | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| 010379727 | TE Connectivity | IN STOCK SHIP TODAY |
| 10 | ||
| 171-037-203L011 | NorComp | IN STOCK SHIP TODAY RoHS : Compliant |
| 3 | ||
| 171-037-202-021 | NorComp | IN STOCK SHIP TODAY | 3 | |||
| 65L811TN1037 | General Electric Company | IN STOCK SHIP TODAY | 2 | |||
| 2-223N103-7 | IN STOCK SHIP TODAY | 2 | ||||
![]() DB Roberts | F2-10-375-13 | Southco |
| 1 | ||
| AV-D30-7K103-76 | Southco | 0 | ||||
| 47-10-372-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 710376 | PennEngineering (PEM) | 0 | ||||
| 1037-125-SS | RAF Electronic Hardware | 0 | ||||
| 10376 | Essentra Components | TAPERED CAPPLUGLDPE RED | 0 | |||
| 10376 | Heyco | HLCBSC4-04 NATURAL | 0 | |||
| 11810-10379 | Avdel | BRIV RIV 3/16 MH ST | 0 | |||
| MP-02-103-715 | Southco | MP-02-103-715 | 0 | |||
| 31037050B | Essentra Components | SHOULDER SCREW, HEX SOCKET, 51 | 0 | |||
| 47-10-372-51 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 10376F | Heyco | HLCBSC4-04 V-0 NATURAL | 0 | |||
| MP-01-103-727 | Southco | Choose push-to-close twist-to-open convenience in an elegant design that actually enhances performance. An anti-vibration feature keeps enclosures quiet despite normal vibrations. This highly designed latch is offered in two different mechanisms and mu | 0 | |||
| 31037125 | Essentra Components | SHOULDER SCREW, HEX SOCKET, 51 | 0 | |||
| B4-50-103-75 | Southco | B4-50-103-75 | 0 | |||
![]() EBV Elektronik | ACFM-1037 | Broadcom Limited | RF Multiplexer Hexaplexer 21GHz 18GHz 26GHz SMD (Alt: ACFM-1037) RoHS : Compliant | 0 | ||
| ACFM-1037-TR1 | Broadcom Limited | (Alt: ACFM-1037-TR1) RoHS : Compliant | 0 | |||
DSC1001CE1-037.1250![]() | Microchip Technology Inc | (Alt: DSC1001CE1-037.1250) RoHS : Compliant | 0 | |||
| DSC1001DL1-037.1250 | Microchip Technology Inc | MEMS Oscillator 37125 MHz SMD 25mm x 2mm 50 ppm 33 V DSC1001 (Alt: DSC1001DL1-037.1250) RoHS : Compliant | 0 | |||
| C10373_NIS83-MX-7-M | LEDIL | (Alt: C10373_NIS83-MX-7-M) RoHS : Compliant | 0 | |||
| DSC1001DL1-037.1250T | Microchip Technology Inc | MEMS OSC LVCMOS 37125MHz 50PPM 1833V 40 to 105C 25 x 20mm (Alt: DSC1001DL1-037.1250T) RoHS : Compliant | 0 | |||
| DSC1001DI1-037.1250T | Microchip Technology Inc | MEMS OSC LVCMOS 37125MHZ 50PPM 1833V 40 TO 85C 25X20MM (Alt: DSC1001DI1-037.1250T) RoHS : Compliant | 0 | |||
| CM8071505103711S RNJK | Intel Corporation | Microprocessor 8 Cores 64bit Core i7 26 GHz FCLGA 1700 Pins (Alt: 99CHCD) RoHS : Compliant | 0 | |||
| CM8071505103704S RMG3 | Intel Corporation | Microprocessor 16 Cores 64bit Core i7 19 GHz FCLGA 1700 Pins (Alt: 99C6JJ) RoHS : Compliant | 0 | |||
| CM8071505103723S RQDU | Intel Corporation | INTEL CORE 7 PROCESSOR 251E BARTLETT LAKE (Alt: 99CMVZ) RoHS : Compliant | 0 | |||
![]() Flip Electronics | UPD78F1037AGBS-GAH-G | Renesas Electronics Corporation | Stock | 251 | ||
![]() Master Electronics | 7-1618103-7 | TE Connectivity | WCT1-120AC-5=WILMAR OVERCURREN RoHS : Not Compliant |
| 3 | |
| 121571-1037-X | ITT Interconnect Solutions | Circular Connector - 90° Plug - Contact Arrangement: 18-19 - Sockets - Threaded Coupling - Endbell No cable clamp RoHS : Not Compliant |
| 0 | ||
| 121576-1037 | ITT Interconnect Solutions | Circular Connector - Cable Mount - Contact Arangement: 24-28 - Pins - Bayonet Coupling - Endbell w/Cable Clamp RoHS : Compliant |
| 0 | ||
| 103741-3 | TE Connectivity | ASSEMBLY MOD II HEADER BREAKAWAY SINGLE ROW .100 C/L VERTICAL WITH .025 SQ. POSTS RoHS : Not Compliant |
| 0 | ||
| 110372-0199 | ITT Interconnect Solutions | KJ7T10N98PN27 / 110372-0199 / Circular RoHS : Compliant |
| 0 | ||
| 110376-0067 | ITT Interconnect Solutions | KJ7T18N35PN; 38999 Series I II and III; Circular RoHS : Compliant |
| 0 | ||
| 2325103-7 | TE Connectivity | 2POS TAB1.2X0.6 HDR ASSY 180DEG SLDR MOQ Reduction RoHS : Compliant |
| 0 | ||
| ESQ-110-37-L-S-001 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-05-19-L-D-1037 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-06-14-G-Q-1037 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 671-RZ-103765 | Marathon Special Products | RoHS : Compliant |
| 0 | ||
| 3742610373 | TE Connectivity | SPEED SEN DSS 1210.15 P9HV MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3MS1-00110379 | Honeywell Sensing and Control | Snap Action Disc Thermostat Automatic Reset 2-Pin. RoHS : Compliant |
| 0 | ||
| ESQ-110-37-H-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-25-13-T-D-1037 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 3-103-708 | Schurter Electronic Components | Power Line Filters FILT 1PH 2ST V 250VAC/DC PF RoHS : Compliant |
| 50 | |
| 410-376 | Digilent Inc | Programmable Logic IC Development Tools Cmod S7 |
| 50 | ||
| 3-103-716 | Schurter Electronic Components | Power Line Filters FILTER 1PH 2ST U 6A 250VAC/DC RoHS : Compliant |
| 21 | ||
| 410-370 | Digilent Inc | Programmable Logic IC Development Tools Cora Z7: Zynq-7000 Single Core Options for ARM/FPGA SoC Development |
| 19 | ||
| 2910378 | Phoenix Contact | Industrial Surge Protectors VAL-US-277/80/ 1+1V-FM RoHS : Compliant |
| 9 | ||
| 2891037 | Phoenix Contact | Managed Ethernet Switches FL SWITCH 3006T 2FXST RoHS : Compliant |
| 3 | ||
| 2910379 | Phoenix Contact | Industrial Surge Protectors VAL-US-277/80/ 3+1V-FM RoHS : Compliant |
| 2 | ||
| 2910375 | Phoenix Contact | Surge protector;4 ch;remote indicator contact for 277/480VAC 4-wire plus ground RoHS : Compliant |
| 1 | ||
| 0921037, ST-SILED 24-UK 4 | Phoenix Contact | Fuse 15 to 30 VAC/VDC 300 V (UL) 6.30 A (UL) 20 mm 5 mm 26.5 mm Black ST Series |
| 0 | ||
| 1037058 | Phoenix Contact | Enclosures, Boxes, & Cases ME MAX DESIGNER KIT |
| 0 | ||
| 21037R | Mersen Electrical Power | Fuse Holder 250V 100A R 2P FUSE BLK |
| 0 | ||
| 3-103-753 | Schurter Electronic Components | Power Line Filters FILTER 1PH 2ST W 12A 240VAC CB RoHS : Compliant |
| 0 | ||
| 1201037A00E-000 | Delta Electronics Inc | Connector, Coaxial Connector, Straight Male, Brass, M39012/26-0018 |
| 0 | ||
| 1037061 | Phoenix Contact | Enclosures, Boxes, & Cases ME DESIGNER KIT |
| 0 | ||
| 3-103-703 | Schurter Electronic Components | Power Line Filters FILTER 1PH 2ST U 12A 250VAC/DC RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C10374 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm. N Male to N Male Low Loss Cable Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male to N male low loss cable using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10374 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10374 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. Type N plug to type N plug cable assembly PE3C10374 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. | 989 | ||
| PE3C10377 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Low Loss Cable Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly SMA male to SMA male low loss cable using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss a SMA to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10377 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10377 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. SMA plug to SMA plug cable assembly PE3C10377 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. | 989 | |||
| PE3C10375 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Low Loss Cable Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and right angle a type N cable connection on the other. Our low loss a type N to right angle a type N cable assembly has male gender on end 1 and male on end 2. PE3C10375 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10375 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. Type N plug to type N plug cable assembly PE3C10375 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10375 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. | 811 | |||
| PE3C10375-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Right Angle Low Loss Cable 12 Inch Length Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 12 inch length using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 12 inch length using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and right angle a type N cable connection on the other. Our low loss a type N to right angle a type N cable assembly has male gender on end 1 and male on end 2. PE3C10375-12 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10375-12 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. Type N plug to type N plug cable assembly PE3C10375-12 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10375-12 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 254 | ||
| PE3C10374-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Low Loss Cable 36 Inch Length Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male to N male low loss cable 36 inch length using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 36 inch length using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10374-36 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10374-36 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. Type N plug to type N plug cable assembly PE3C10374-36 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 145 | ||
| PE3C10375-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Right Angle Low Loss Cable 48 Inch Length Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 48 inch length using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 48 inch length using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and right angle a type N cable connection on the other. Our low loss a type N to right angle a type N cable assembly has male gender on end 1 and male on end 2. PE3C10375-48 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10375-48 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. Type N plug to type N plug cable assembly PE3C10375-48 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10375-48 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 108 | ||
| PE3C10379-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to SMA Male Low Loss Cable 48 Inch Length Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male to SMA male low loss cable 48 inch length using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to SMA male low loss cable 48 inch length using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss a type N to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10379-48 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10379-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Type N plug to SMA plug cable assembly PE3C10379-48 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10379-48 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. |
| 108 | ||
| PE3W11037LF-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-500, RF Cable Type: SPF-500, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. Fire Rated N Male to N Male Low PIM Cable 50 CM Length Using SPF-500 Coax With Times Microwave Components, LF Solder., Radio frequency assembly fire rated N male to N male low PIM cable 50 cm length using SPF-500 coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Fire rated N male to N male low PIM cable 50 cm length using SPF-500 coax with Times Microwave components, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low PIM type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W11037LF-50CM can also be known as a low PIM type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3W11037LF-50CM is built with SPF-500 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to N male low PIM cable 50 cm length using SPF-500 coax with Times Microwave components, LF solder. |
| 35 | ||
| PE3W11037-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-500, RF Cable Type: SPF-500, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. Fire Rated N Male to N Male Low PIM Cable 50 cm Length Using SPF-500 Coax With Times Microwave Components., Radio frequency assembly fire rated N male to N male low PIM cable 50 cm length using SPF-500 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Fire rated N male to N male low PIM cable 50 cm length using SPF-500 coax with Times Microwave components, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low PIM N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W11037-50CM can also be known as a low PIM type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3W11037-50CM is built with SPF-500 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to N male low PIM cable 50 cm length using SPF-500 coax with Times Microwave components. |
| 35 | ||
| PE3W11037/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-500, RF Cable Type: SPF-500, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using SPF-500 Coax with HeatShrink. PE3W11037/HS is a N male to N male cable using SPF-500 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W11037/HS N male to N male cable assembly is constructed with SPF-500 coax. | 0 | |||
| PE3W01037/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Double Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. BNC Male to Double Banana Plug Cable Using LMR-195 Coax with HeatShrink. PE3W01037/HS is a BNC male to Double Banana plug cable using LMR-195 coax. This Pasternack BNC male to Double Banana plug cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm Double Banana for connector 2. Our male BNC to plug Double Banana cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01037/HS BNC male to Double Banana plug cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C10371-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600-FR, RF Cable Type: TCOM-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Fire Rated 4.3-10 Male to 7/16 DIN Male Low PIM Cable 36 Inch Length Using TCOM-600-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to 7/16 DIN male low PIM cable 36 inch length using TCOM-600-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 4.3-10 male to 7/16 DIN male low PIM cable 36 inch length using TCOM-600-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 4.3-10 to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10371-36 can also be known as a low PIM 4.3-10 plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10371-36 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C10371-36 is built with TCOM-600-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10371-36 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10372-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600-FR, RF Cable Type: TCOM-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated 4.3-10 Male to N Male Low PIM Cable 48 Inch Length Using TCOM-600-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to N male low PIM cable 48 inch length using TCOM-600-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 4.3-10 male to N male low PIM cable 48 inch length using TCOM-600-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM a 4.3-10 to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10372-48 can also be known as a low PIM 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10372-48 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 4.3-10 plug to type N plug cable assembly PE3C10372-48 is built with TCOM-600-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10372-48 can also be used in the other direction and will be type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10378-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Low Loss Cable 60 Inch Length Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly TNC male to TNC male low loss cable 60 inch length using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 60 inch length using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss a TNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10378-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10378-60 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. TNC plug to TNC plug cable assembly PE3C10378-60 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10371 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600-FR, RF Cable Type: TCOM-600-FR, RF Cable Impedance: 50 Ohm. Fire Rated 4.3-10 Male to 7/16 DIN Male Low PIM Cable Using TCOM-600-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to 7/16 DIN male low PIM cable using TCOM-600-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 4.3-10 male to 7/16 DIN male low PIM cable using TCOM-600-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 4.3-10 to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10371 can also be known as a low PIM 4.3-10 plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10371 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C10371 is built with TCOM-600-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10371 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. | 0 | |||
![]() Vyrian | LT1037ACN8#PBF | Analog Devices Inc | Operational Amplifier, 1 Func, 50uV Offset-Max, BIPolar, PDIP8 RoHS : Compliant | 11,094 | ||
| LT1037ACN8 | Analog Devices Inc | Operational Amplifier, 1 Func, 50uV Offset-Max, BIPolar, PDIP8 RoHS : Not Compliant | 9,930 | |||
| LT1037AMLB | Texas Instruments | Operational Amplifier, 1 Func, 60uV Offset-Max, BIPolar, MBCY8 RoHS : Not Compliant | 9,319 | |||
| LT1037ACN8-PBF | Analog Devices Inc | 9,014 | ||||
| LT1037CD | Texas Instruments | Operational Amplifier, 1 Func, 110uV Offset-Max, BIPolar, PDSO16 RoHS : Not Compliant | 8,200 | |||
LT1037CDW![]() | Texas Instruments | Operational Amplifier, 1 Func, 110uV Offset-Max, BIPolar, PDSO16 RoHS : Not Compliant | 7,850 | |||
| LT1037AMFKB | Texas Instruments | 7,610 | ||||
LT1037ACL![]() | Texas Instruments | Operational Amplifier, 1 Func, 50uV Offset-Max, BIPolar, MBCY8 RoHS : Not Compliant | 6,347 | |||
LT1037AML![]() | Texas Instruments | Operational Amplifier, 1 Func, 25uV Offset-Max, BIPolar, PBCY8 RoHS : Not Compliant | 4,502 | |||
LT1037AMP![]() | Texas Instruments | Operational Amplifier, 1 Func, 60uV Offset-Max, BIPolar, PDIP8 RoHS : Not Compliant | 4,187 | |||
LT1037AMJG![]() | Texas Instruments | Operational Amplifier, 1 Func, 60uV Offset-Max, BIPolar, CDIP8 RoHS : Not Compliant | 4,088 | |||
| LT1037AMJGB | Texas Instruments | Operational Amplifier RoHS : Not Compliant | 4,069 | |||
LT1037ACJG![]() | Texas Instruments | Operational Amplifier, 1 Func, 50uV Offset-Max, BIPolar, CDIP8 RoHS : Not Compliant | 3,933 | |||
LT1037CJG![]() | Texas Instruments | Operational Amplifier, 1 Func, 110uV Offset-Max, BIPolar, CDIP8 RoHS : Not Compliant | 3,264 | |||
LT1037CDWR![]() | Texas Instruments | Operational Amplifier, 1 Func, 110uV Offset-Max, BIPolar, PDSO16 RoHS : Not Compliant | 3,073 | |||
![]() Waytek, Inc. | 19221-0379 | Molex | 2/0 Copper Eyelet 3/8" Stud RoHS : Compliant |
| 5,304 | |
| 192210378 | Molex | 1GA Copper Eyelet 3/8" Stud RoHS : Compliant |
| 1,550 | ||
| 19221-0377 | Molex | 1/0 Copper Eyelet 3/8" Stud RoHS : Compliant |
| 0 | ||
![]() Win Source Electronics | 2SA1037AKT146R![]() | ROHM Semiconductor | TRANS PNP 50V 0.15A SOT-346 RoHS : Compliant |
| 876,000 | |
MAX1037EKA![]() | Maxim Integrated Products | ADC, SUCCESSIVE APPROXIMATION, 8 RoHS : Not Compliant |
| 52,885 | ||
| 53261-0371 | Molex | Headers & Wire Housings 1.25MM HDR 3 CKT Right-Angle RoHS : Compliant |
| 51,042 | ||
| 532610371 | Molex | 3 Positions Header, Shrouded Connector 0.049" (1.25mm) Surface Mount, Right Angle Tin |
| 51,042 | ||
MAX1037EKA+T![]() | Maxim Integrated Products | IC ADC 8-BIT 188KSPS SOT23-8 RoHS : Compliant |
| 48,390 | ||
MAX1037EKA-T![]() | Maxim Integrated Products | IC ADC 8BIT SAR SOT23-8 RoHS : Not Compliant |
| 48,390 | ||
| 0532610371 | Molex | CONN HEADER SMD R/A 3POS 1.25MM / Connector Header Surface Mount, Right Angle 3 position 0.049" (1.25mm) RoHS : Compliant |
| 36,440 | ||
| L2SA1037AKRLT1G | LRC Leshan Radio Co Ltd | RoHS : Compliant |
| 30,000 | ||
| KX122-1037 | Kionix Inc | ACCELEROMETER 2-8G I2C/SPI 12LGA RoHS : Compliant |
| 12,856 | ||
| AOZ1037PI-01 | Alpha & Omega Semiconductor | IC REG BUCK SYNC ADJ 5A 8SOIC RoHS : Compliant |
| 12,174 | ||
AOZ1037PI![]() | Alpha & Omega Semiconductor | IC REG BUCK ADJ 5A SYNC 8SO RoHS : Compliant |
| 3,000 | ||
| MAAM-010373-TR1000 | MACOM | Broadband CATV Amplifier RoHS : Compliant |
| 2,467 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |