| Electronic Components Datasheet Search |
|
10261 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Verical | 102617-1 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 6 POS 2.54mm Solder RA Side Entry Thru-Hole Tray RoHS : Not Compliant |
| 2,818 | |
| 102617-8 | TE Connectivity | Conn Shrouded Header HDR 20 POS 2.54mm Solder RA Thru-Hole Tray RoHS : Not Compliant |
| 2,598 | ||
| 102617-5 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 14 POS 2.54mm Solder RA Side Entry Thru-Hole Tray RoHS : Not Compliant |
| 1,759 | ||
| 102617-2 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 8 POS 2.54mm Solder RA Side Entry Thru-Hole Tray RoHS : Not Compliant |
| 1,312 | ||
| 102619-3 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 10 POS 2.54mm Solder ST Top Entry Thru-Hole Tray RoHS : Not Compliant |
| 1,219 | ||
| 102618-4 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 12 POS 2.54mm Solder ST Thru-Hole Tray RoHS : Not Compliant |
| 956 | ||
| 102619-3 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 10 POS 2.54mm Solder ST Top Entry Thru-Hole Tray RoHS : Not Compliant |
| 400 | ||
| 102618-3 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 10 POS 2.54mm Solder ST Top Entry Thru-Hole Tray RoHS : Not Compliant |
| 243 | ||
| 102618-5 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 14 POS 2.54mm Solder ST Top Entry Thru-Hole Tray RoHS : Not Compliant |
| 236 | ||
| 1026178 | Bossard Group | 1026178 |
| 200 | ||
| 102617-6 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 16 POS 2.54mm Solder RA Side Entry Thru-Hole Tray RoHS : Not Compliant |
| 190 | ||
| 102618-1 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 6 POS 2.54mm Solder ST Top Entry Thru-Hole Tray RoHS : Not Compliant |
| 150 | ||
| 102618-6 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 16 POS 2.54mm Solder ST Top Entry Thru-Hole Tray RoHS : Not Compliant |
| 130 | ||
| 102619-4 | TE Connectivity | Conn Shrouded Header HDR 12 POS 2.54mm Solder ST Thru-Hole Tray |
| 50 | ||
| 1026190300 | Weidmüller Interface GmbH & Co. KG | 1026190300 |
| 9 | ||
![]() Avnet Americas | 5-102618-2 | TE Connectivity | - Trays (Alt: 5-102618-2) RoHS : Compliant |
| 4,952 | |
| 5-102618-1 | TE Connectivity | Pin Header, Wire-to-Board, 2.54 mm, 2 Rows, 6 Contacts, Through Hole Straight - Trays (Alt: 5-102618-1) RoHS : Compliant |
| 4,734 | ||
| 5-102618-5 | TE Connectivity | - Trays (Alt: 5-102618-5) RoHS : Compliant |
| 4,480 | ||
| 5-102618-8 | TE Connectivity | - Trays (Alt: 5-102618-8) RoHS : Compliant |
| 3,696 | ||
| 5-102618-4 | TE Connectivity | - Trays (Alt: 5-102618-4) RoHS : Compliant |
| 1,968 | ||
| 5-102617-5 | TE Connectivity | - Trays (Alt: 5-102617-5) RoHS : Compliant |
| 1,440 | ||
| 6-102618-0 | TE Connectivity | - Trays (Alt: 6-102618-0) RoHS : Compliant |
| 592 | ||
| 5-102619-3 | TE Connectivity | - Trays (Alt: 5-102619-3) RoHS : Compliant |
| 45 | ||
| 102618-4 | TE Connectivity | Conn Shrouded Header HDR 12 POS 2.54mm Solder ST Thru-Hole - Trays (Alt: 102618-4) RoHS : Not Compliant |
| 24 | ||
| SEC141026-104 | ITT Interconnect Solutions | - Bulk (Alt: SEC141026-104) RoHS : Not Compliant |
| 0 | ||
| CRCW1210261KFKEA | Vishay Intertechnologies | CRCW1210 100 261K 1% ET1 e3 - Tape and Reel (Alt: CRCW1210261KFKEA) RoHS : Compliant |
| 0 | ||
| MMD41-0261B1 | Vishay Intertechnologies | MMS24-26026L T02 - Bulk (Alt: MMD41-0261B1) RoHS : Not Compliant |
| 0 | ||
| PR01000102619FA500 | Vishay Intertechnologies | Resistor Power Metal Film 26.1 Ohm 1% 1W ?250ppm/K Ceramic Axial Ammo Pack - Ammo Pack (Alt: PR01000102619FA500) RoHS : Compliant |
| 0 | ||
| 5-1102616-5 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 5-1102616-5) RoHS : Compliant |
| 0 | ||
| 1-102618-3 | TE Connectivity | - Trays (Alt: 1-102618-3) RoHS : Not Compliant |
| 0 | ||
![]() Arrow Electronics | 10-2613.1075 | EAO AG | Single LED Green RoHS : Compliant |
| 1 | |
![]() Newark | 5-102619-3 | TE Connectivity | Pin Header, 5-102619-3; |Te Connectivity 5-102619-3 RoHS : Compliant |
| 3,326 | |
| 5-102617-1 | TE Connectivity | Header, Right Angle, 2Row, 6Way; |Te Connectivity Amp 5-102617-1 RoHS : Compliant |
| 1,186 | ||
| 561-02611 WIC2-1-PA66-BN | HellermannTyton | Wire Marker, Snap On, Nylon 6.6, Brown; |Hellermanntyton 561-02611 WIC2-1-PA66-BN RoHS : Compliant |
| 800 | ||
| 5-102617-7 | TE Connectivity | Conn, R/A, Header, 18Pos, 2Row, 2.54Mm; |Te Connectivity 5-102617-7 RoHS : Compliant |
| 661 | ||
| 560112110261 | Wurth Elektronik | Res, 73K2, 1%, 0.1W, Thick Film, 0402; |Würth Elektronik 560112110261 RoHS : Compliant |
| 380 | ||
| 4.16.10.26.14 | DUCATI Energia Spa | Cap, Motor Run, 25Uf, 450V, Can; |Ducati 4.16.10.26.14 RoHS : Compliant |
| 221 | ||
| AX102615 | Belden Inc | Kit Mflex Filler Insert(10/Pk); |Belden AX102615 RoHS : Not Compliant |
| 73 | ||
| AX102612 | Belden Inc | Kit Mflex Mdvo Inserts (10/Pk); |Belden AX102612 RoHS : Not Compliant |
| 12 | ||
| 1205010261 | Molex | Sensor Cord, M12 R/A Rcpt-R/A Plug, 10M; |Molex 1205010261 RoHS : Compliant |
| 8 | ||
| 102617-1 | TE Connectivity | 102617-1; Available Until Stocks Are Exhausted Alternative Available |Te Connectivity Amp 102617-1 RoHS : Not Compliant |
| 5 | ||
| 101026123SP | nVent Hoffman | Comp Rga5467Cxd 230V R407C; |Nvent Hoffman 101026123SP RoHS : Compliant |
| 3 | ||
| 101026107SP | nVent Hoffman | Comp Rka5512Yxd 230V; |Nvent Hoffman 101026107SP RoHS : Compliant |
| 2 | ||
| 10-2613.1075 | EAO AG | Led, Green, 320Mcd, 525Nm; Led Color:Green; Led Mounting:Through Hole; Led Case Size:-; Forward Current If:9Ma; Forward Voltage:28V; Wavelength Typ:525Nm; Luminous Intensity:320Mcd; Viewing Angle:-; Lens Shape:Round With Flat Top Rohs Compliant: Yes RoHS : Compliant |
| 2 | ||
| 89102610SP | nVent Hoffman | Coil Condr 1500W; |Nvent Hoffman 89102610SP RoHS : Compliant |
| 1 | ||
| 09200102614 | HARTING Technology Group | Han 10A Male Screw Terminal Insert (With Wire Protection) Rohs Compliant: Yes |Harting 09200102614 RoHS : Compliant |
| 1 | ||
![]() RS | 1026128 | RS Pro | TIME DELAY RELAY DELAY OFF SPDT 17.5MM DIN RAIL 12-230VAC/VDC SCREW TERM |
| 471 | |
| 09330102616 | HARTING Technology Group | RECTANGULAR PLUG INSERT, 10+PE, 10B, 14-26AWG, CAGE CLAMP, 600V, HAN E SERIES RoHS : Compliant |
| 176 | ||
| 1026134 | RS Pro | MULTIFUNCTION COMBINED CURRENT RELAY SPDT 24-230 VAC/VDC 1-PHASE UL LISTED |
| 78 | ||
| 1026130 | RS Pro | MULTIFUNCTION VOLTAGE RELAY SPDT 12 TO 24 VDC 1 PHASE DIN RAIL UL LISTED |
| 67 | ||
| 1026133 | RS Pro | MULTIFUNCTION COMBINED VOLTAGE RELAY SPDT 230 VAC/DC 1-PHASE UL LISTED |
| 52 | ||
| 1026127 | RS Pro | TIME DELAY RELAY ASYMMETRICAL SPDT 17.5MM DIN RAIL 12-230VAC/VDC SCREW TERM |
| 45 | ||
| 09200102614 | HARTING Technology Group | HEAVY DUTY CONNECTOR, MALE INSERT, SCREW TERMINATION, 10+GROUND, HAN A SERIES RoHS : Compliant |
| 32 | ||
| 1026136 | RS Pro | MULTIFUNCTION MONITORING RELAY SPDT 280 TO 520 VAC 3-PHASE UL LISTED |
| 25 | ||
| 1026123 | RS Pro | TIME DELAY RELAY MULTIFUNCTION DPDT 17.5MM DIN RAIL 12-230VAC/VDC SCREW TERM |
| 24 | ||
| 1026129 | RS Pro | TIME DELAY RELAY MULTIFUNCTION SPDT 17.5MM DIN RAIL 12-230VAC/VDC SCREW TERM |
| 23 | ||
| E10261 | STA-KON | NON-INSULATED TUBULAR RING TERMINAL, 1.26"LX .49"W,#10 BOLT,6/6AN, TIN PLATEDC |
| 20 | ||
| 1026137 | RS Pro | MULTIFUNCTION MONITORING RELAY SPDT 400 VAC 3-PHASE SCREW TERM UL LISTED |
| 5 | ||
| 1026131 | RS Pro | MULTIFUNCTION VOLTAGE RELAY SPDT 230 VAC 1-PHASE DIN RAIL UL LISTED |
| 2 | ||
| 1026135 | RS Pro | MULTIFUNCTION MONITORING RELAY SPDT 280 TO 520 VAC 3-PHASE UL LISTED |
| 1 | ||
| NBB-10261 | BUD Industries Inc | INDOOR ENCLOSURE, NEMA 4 X , IP66, ABS, CLEAR DOOR, UL94-HB, NBF SERIES |
| 1 | ||
![]() Microchip Technology Inc | MV31026-129A | Microchip Technology Inc | GaAs TVAR Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | ||
| MV31026-150A | Microchip Technology Inc | GaAs TVAR Non Hermetic EPSM SMT, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| MV31026-154-4 | Microchip Technology Inc | GaAs TVAR Non Hermetic EPSM SMT, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| MV31026-150A/TR | Microchip Technology Inc | GaAs TVAR Non Hermetic EPSM SMT, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| MV31026-154-4/TR | Microchip Technology Inc | GaAs TVAR Non Hermetic EPSM SMT, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
![]() Bisco Industries | RE10261 | Thomas & Betts | RoHS : Compliant | 2,525 | ||
| E10261 | Thomas & Betts | RoHS : Compliant | 803 | |||
| F10261 | Thomas & Betts | RoHS : Compliant | 786 | |||
| 5710-261-24 | Seastrom Mfg | 300 | ||||
| 5610-261-50 | Seastrom Mfg | 151 | ||||
| 0810261E | MISC. INDUSTRIAL HRD | 29 | ||||
| B1026-12 | Staffall | 13 | ||||
| 061-02611-000 | Leviton Manufacturing Co | 10 | ||||
| 1026-125-SS | RAF Electronic Hardware | 5 | ||||
| E10261NP | Thomas & Betts | 1 | ||||
![]() Future Electronics | 10261 | Heyco | RoHS : Compliant |
| 0 | |
![]() Onlinecomponents.com | 42-10261 | Amphenol CONEC | RoHS : Compliant |
| 10 | |
| NBB-10261 | BUD Industries Inc | Light Gray Plastic Bracket Mount Non Metallic Enclosure - External 10.73 x 6.79 x 4.33 Inches - Internal 9.84 x 5.9 x 4.07 Inches RoHS : Compliant |
| 7 | ||
| 10261 | Heyco | HMCBP-24 NATURAL RoHS : Compliant |
| 0 | ||
| THR-10261-12 | Macromatic Industrial Controls Inc | TIME DELAY RELAY; ON DELAY RoHS : Compliant |
| 0 | ||
| THR-10261-08 | Macromatic Industrial Controls Inc | TIME DELAY RELAY; ON DELAY RoHS : Compliant |
| 0 | ||
| THR-10261-32 | Macromatic Industrial Controls Inc | TIME DELAY RELAY; ON DELAY RoHS : Compliant |
| 0 | ||
| THR-10261-35 | Macromatic Industrial Controls Inc | TIME DELAY RELAY; ON DELAY RoHS : Compliant |
| 0 | ||
| THR-10261-30 | Macromatic Industrial Controls Inc | TIME DELAY RELAY; ON DELAY RoHS : Compliant |
| 0 | ||
| THR-10261-35J | Macromatic Industrial Controls Inc | TIME DELAY RELAY; ON DELAY RoHS : Compliant |
| 0 | ||
| THR-10261-37J | Macromatic Industrial Controls Inc | TIME DELAY RELAY; ON DELAY RoHS : Compliant |
| 0 | ||
| THR-10261-17 | Macromatic Industrial Controls Inc | TIME DELAY RELAY; ON DELAY RoHS : Compliant |
| 0 | ||
| THR-10261-08J | Macromatic Industrial Controls Inc | TIME DELAY RELAY; ON DELAY RoHS : Compliant |
| 0 | ||
| THR-10261-34 | Macromatic Industrial Controls Inc | TIME DELAY RELAY; ON DELAY RoHS : Compliant |
| 0 | ||
| THR-10261-F | Macromatic Industrial Controls Inc | TIME DELAY RELAY; ON DELAY RoHS : Compliant |
| 0 | ||
| THR-10261-31 | Macromatic Industrial Controls Inc | TIME DELAY RELAY; ON DELAY RoHS : Compliant |
| 0 | ||
![]() Sager | 1.02.614.502/1502 | RAFI USA Inc | Panel Mount Indicator Lamps SIGNALLEUCHTE 230V | 0 | ||
| 5-1102616-5 | TE Connectivity | Heavy Duty Power Connectors HIPK.16/40.SG.1.21G RoHS : Compliant |
| 0 | ||
| 310-44-102-61-001000 | Mill-Max Mfg Corp | IC & Component Sockets Interconnect Socket | 0 | |||
| 4151026-1 | TE Connectivity | TE Connectivity | 0 | |||
| 1-102618-3 | TE Connectivity | Headers & Wire Housings SHROUDED VER DUAL 30 detent windows RoHS : Not Compliant |
| 0 | ||
| 803-91-026-10-002000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Not Compliant | 0 | |||
| 853-91-026-10-001000 | Mill-Max Mfg Corp | IC & Component Sockets STANDARD SOCKET HEADER RoHS : Not Compliant |
| 0 | ||
| 2-1102610-5 | TE Connectivity | Heavy Duty Power Connectors HIP-K.10/24.SG.1.21 RoHS : Compliant | 0 | |||
| 1731110261 | Molex | FCT HOOD S2 0 DEG MTL W/SCRWLCK RoHS : Compliant |
| 0 | ||
| 316-43-102-61-001000 | Mill-Max Mfg Corp | IC & Component Sockets Interconnect Socket | 0 | |||
| 5-102617-8 | TE Connectivity | Headers & Wire Housings HDR 2X10P R/A T/H RoHS : Compliant |
| 0 | ||
| 6-102618-2 | TE Connectivity | Headers & Wire Housings 28 MODII HDR DRST SHRD .100CL RoHS : Compliant |
| 0 | ||
| 1.02.614.002/1301 | RAFI USA Inc | Panel Mount Indicator Lamps SIGNAL LAMP TRANSPARNT COLORLESS | 0 | |||
| 5-102618-5 | TE Connectivity | Headers & Wire Housings HDR 2X07P VRT T/H RoHS : Compliant |
| 0 | ||
| 10-2613.1075 | EAO AG | SINGLE-LED, T1 BI-PIN, GREEN, 28 V AC/DC +10% RoHS : Compliant |
| 0 | ||
![]() TME | 5-102618-1 | TE Connectivity | PIN: 6; Plating: gold-plated; THT; on PCBs; vertical RoHS : Compliant |
| 4,837 | |
| 5-102618-3 | TE Connectivity | Male; PIN: 10; Plating: tinned,gold-plated; THT; on PCBs,for cable RoHS : Compliant |
| 865 | ||
| 102617-5 | TE Connectivity | Male; PIN: 14; angled; 3A; THT; on PCBs; 2.54mm; Plating: gold-plated RoHS : Not Compliant |
| 166 | ||
| 6-102618-8 | TE Connectivity | Connector: PCB to PCB; male; AMPMODU MOD II; vertical,straight RoHS : Compliant |
| 160 | ||
| 5-102618-2 | TE Connectivity | PIN: 8; Plating: gold-plated; THT; on PCBs RoHS : Compliant |
| 140 | ||
| 733910261 | Molex | Connector: SMA; socket; coaxial; straight; 50Ω; RG174,RG188,RG316 RoHS : Compliant |
| 100 | ||
| 351-0261-000 | ITT Interconnect Solutions | 351-0261-000 |
| 27 | ||
| 102614 | MCI Transformer Corporation | Patch cord; F/UTP; Cat 6; RJ45 right angled plug,both sides |
| 0 | ||
| 102615 | MCI Transformer Corporation | Patch cord; F/UTP; Cat 6; RJ45 right angled plug,both sides; 4m |
| 0 | ||
| 1026129 | Lapp Group | Wire: control cable; 4G1mm2; PVC; black; stranded; Cu; 7.8mm RoHS : Compliant |
| 0 | ||
| 102613 | MCI Transformer Corporation | Patch cord; F/UTP; Cat 6; RJ45 right angled plug,both sides; 3m |
| 0 | ||
| 1026133 | Lapp Group | Wire: control cable; 25G1mm2; PVC; black; stranded; Cu; 17.9mm RoHS : Compliant |
| 0 | ||
| 10261798 | Essentra Components | Stopper; 50.8mm |
| 0 | ||
| KD7 00110261120 | LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature |
| 0 | ||
| KD7 11110261018 | LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature |
| 0 | ||
![]() ComSIT USA | CR10-2612-FK | ASJ Holdings Limited | Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 26100ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 500,000 | ||
| AS7C3102612TC | Alliance Memory Inc | 3.3V 64K X 16 CMOS SRAM Standard SRAM, 64KX16, 12ns, CMOS, PDSO44 RoHS : Not Compliant | 482 | |||
| AS7C102615TC | Alliance Memory Inc | 5V 64K X 16 CMOS SRAM Standard SRAM, 64KX16, 15ns, CMOS, PDSO44 RoHS : Not Compliant | 256 | |||
| AS7C102615JC | Alliance Memory Inc | 5V 64K X 16 CMOS SRAM Standard SRAM, 64KX16, 15ns, CMOS, PDSO44 RoHS : Not Compliant | 190 | |||
![]() Interstate Connecting Components | SEC141026-104 | ITT Interconnect Solutions | SEC141026-104 | 0 | ||
| 210261-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCHT-SCE-1K-3/8-2.0-0 | 0 | |||
| 5-1102616-5 | TE Connectivity | HIPK.16/40.SG.1.21G RoHS : Compliant |
| 0 | ||
| 1-102618-3 | TE Connectivity | 30 MODII HDR DRST SHRD .100CL RoHS : Not Compliant |
| 0 | ||
| 5-102617-8 | TE Connectivity | 20 MODII HDR DRRA SHRD LF RoHS : Compliant |
| 0 | ||
| 6-102618-2 | TE Connectivity | 28 MODII HDR DRST SHRD .1 RoHS : Compliant |
| 0 | ||
| 5-102618-5 | TE Connectivity | 14 MODII HDR DRST SHRD .100CL RoHS : Compliant |
| 0 | ||
| 102617-1 | TE Connectivity | 06 MODII HDR DRRA SHRD .100CL RoHS : Not Compliant |
| 0 | ||
| 1-102618-0 | TE Connectivity | 24 MODII HDR DRST SHRD .100CL RoHS : Not Compliant |
| 0 | ||
| 7-102618-8 | TE Connectivity | 60 MODII HDR DRST SHRD .100CL RoHS : Compliant |
| 0 | ||
| 6-102618-3 | TE Connectivity | 30 MODII HDR DRST SHRD .100CL RoHS : Compliant |
| 0 | ||
| 6-102618-5 | TE Connectivity | 34 MODII HDR DRST SHRD .100CL RoHS : Compliant |
| 0 | ||
| 5-102618-4 | TE Connectivity | 12 MODII HDR DRST SHRD .100CL RoHS : Compliant |
| 0 | ||
| 192991-0261 | ITT Interconnect Solutions | TST36RB02Z RoHS : Compliant | 0 | |||
| 710261-1 | TE Connectivity | RDFA 100/2000 (503) | 0 | |||
![]() NexGen Digital | AS7C31026-12TC![]() | Alliance Semiconductor Corporation | RoHS : Not Compliant | 165 | ||
![]() PEI Genesis | 192991-0261 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | |
| 034-1026-12G | Amphenol RF |
| 0 | |||
| 106-10261 | SUMITOMO ELECTRIC Interconnect Products |
| 0 | |||
![]() Powell Electronics | 5-102619-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 14,672 | |
| 1-102618-8 | TE Connectivity | Connectors RoHS : Not Compliant |
| 3,516 | ||
| 210261-000 | TE Connectivity | Labels and Industrial Warning Signs |
| 1,914 | ||
| 102617-1 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 1,860 | ||
| 102617-8 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 1,715 | ||
| 102617-5 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 1,161 | ||
| 5-102618-8 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 884 | ||
| 102617-2 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 866 | ||
| 102619-3 | TE Connectivity | Connectors RoHS : Not Compliant |
| 805 | ||
| 5-1102616-5 | TE Connectivity | Unspecified Connectors RoHS : Compliant |
| 390 | ||
| 6-102619-8 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 290 | ||
| 102618-5 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 156 | ||
| 6-102617-0 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 3 | ||
| 5-102618-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1 | ||
| 2-1102618-5 | TE Connectivity | Unspecified Connectors RoHS : Compliant |
| 1 | ||
![]() Richardson RFPD | RFN-1026-1X | RF Industries | RF COAX CABLE MT CON RoHS : Compliant | 0 | ||
| 5-102618-5 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 14 POS 2.54mm S RoHS : Compliant |
| 0 | ||
| R573102610 | Radiall | SP6 R N12 No 12 C+ P RoHS : Not Compliant |
| 0 | ||
| 6-102617-3 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 30 POS 2.54mm S RoHS : Compliant | 0 | |||
| 034-1026-12G | Amphenol Corporation | Conn HD-BNC 0Hz to 18GHz 75OhmCrimp STCable Mount RoHS : Compliant |
| 0 | ||
11026199-00![]() | TE Connectivity | Precision NTC Glass Thermistor RoHS : Compliant | 0 | |||
| SI5351A-B10261-GTR | Skyworks Solutions Inc | CMOS Clock Generator with VCXO RoHS : Compliant | 0 | |||
| HL6528RD-G_1102610 | Sierra Wireless | 2G/3G EMBED CELL MOD RoHS : Compliant | 0 | |||
| 11026149-00 | TE Connectivity | Precision NTC Glass Thermistor RoHS : Not Compliant |
| 0 | ||
| 5-102618-2 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 8 POS 2.54mm So RoHS : Compliant | 0 | |||
| SI5351A-B10261-GT | Skyworks Solutions Inc | CMOS Clock Generator with VCXO RoHS : Compliant | 0 | |||
![]() Rutronik | CR10-2612-FK | ASJ Holdings Limited | RC0402 26,1K 1% 0,063W TK100 RoHS : Compliant |
| 550,000 | |
| A37-1026-14 | Alysium-Tech GmbH | 14P FFC/FPC LIF SMT Backlock 0.50mm RoHS : Compliant |
| 80 | ||
![]() Chip 1 Exchange | CR10-2612-FK | ASJ Holdings Limited | INSTOCK RoHS : Compliant | 9,408 | ||
| 10261530RR9 | INSTOCK | 640 | ||||
| 1102614210 | L&S | INSTOCK | 265 | |||
| 1D51026-1 | INSTOCK | 10 | ||||
![]() Avnet Abacus | 102617-2 | TE Connectivity | (Alt: 102617-2) RoHS : Not Compliant | 0 | ||
| 102617-3 | TE Connectivity | (Alt: 102617-3) RoHS : Not Compliant | 0 | |||
| 102617-9 | TE Connectivity | Conn Shrouded Header HDR 22 POS 254mm Solder RA ThruHole (Alt: 102617-9) RoHS : Not Compliant | 0 | |||
| 210261-000 | TE Connectivity | (Alt: 210261-000) RoHS : Compliant | 0 | |||
| 1-102618-8 | TE Connectivity | Conn Shrouded Header HDR 40 POS 254mm Solder ST ThruHole (Alt: 1-102618-8) RoHS : Not Compliant | 0 | |||
| 5-102617-8 | TE Connectivity | Conn Shrouded Header HDR 20 POS 254mm Solder RA ThruHole (Alt: 5-102617-8) RoHS : Compliant | 0 | |||
| 5-102617-8 | TE Connectivity | Conn Shrouded Header HDR 20 POS 254mm Solder RA ThruHole (Alt: 5-102617-8) RoHS : Compliant | 0 | |||
| 6-102618-2 | TE Connectivity | (Alt: 6-102618-2) RoHS : Compliant | 0 | |||
| 5-102618-5 | TE Connectivity | Conn Shrouded Header HDR 14 POS 254mm Solder ST ThruHole (Alt: 5-102618-5) RoHS : Compliant | 0 | |||
| 5-102618-5 | TE Connectivity | Conn Shrouded Header HDR 14 POS 254mm Solder ST ThruHole (Alt: 5-102618-5) RoHS : Compliant | 0 | |||
| 2-1102617-5 | TE Connectivity | HIPK1640SG221 (Alt: 2-1102617-5) RoHS : Compliant | 0 | |||
| 5-1102616-5 | TE Connectivity | (Alt: 5-1102616-5) RoHS : Compliant | 0 | |||
| 2-1102610-5 | TE Connectivity | Connector Accessories Housing Die Cast Aluminum Black Finish Loose Piece (Alt: 2-1102610-5) RoHS : Compliant | 0 | |||
| RC0805FR-10261KL | YAGEO Corporation | SMD Chip Resistor 261 kOhm 1 125 mW 0805 2012 Metric Thick Film General Purpose - Tape and Reel (Alt: RC0805FR-10261KL) RoHS : Compliant | 0 | |||
| RC1206FR-10261RL | YAGEO Corporation | - Tape and Reel (Alt: RC1206FR-10261RL) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 6-102618-5 | TE Connectivity | (Alt: 6-102618-5) RoHS : Compliant | 0 | ||
| 5-102618-2 | TE Connectivity | (Alt: 5-102618-2) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MV31026-129A | Microchip Technology Inc | (Alt: MV31026-129A) RoHS : Not Compliant | 0 | ||
![]() Component Electronics, Inc | RMCF1/10-261K-1%-R | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 5,000 | |
| RMC1/10-261R-1% | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY | 4,550 | |||
| CR10-2613F-T | KYOCERA Corporation | IN STOCK SHIP TODAY | 4,500 | |||
| CRCW20102610FR02 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4,000 | ||
| CRCW10261212FRT1 | Vishay Dale | IN STOCK SHIP TODAY |
| 2,222 | ||
| RE10261 | Thomas & Betts | IN STOCK SHIP TODAY RoHS : Compliant |
| 540 | ||
| 1-102618-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 348 | ||
| 1-102619-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 280 | ||
| REV10261U | Thomas & Betts | IN STOCK SHIP TODAY |
| 250 | ||
| REV10261 | Thomas & Betts | IN STOCK SHIP TODAY RoHS : Unknown |
| 165 | ||
| 102619-8 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 140 | ||
| CRCW10261000FRT1 | Vishay Dale | IN STOCK SHIP TODAY |
| 100 | ||
| 5-102617-8 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant | 50 | |||
| 5-102617-6 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant | 26 | |||
| 2-102618-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 12 | ||
![]() DB Roberts | 10261 | Heyco | HMCBP-24 NATURAL | 0 | ||
| 10261 | Essentra Components | 0 | ||||
| AC-10-261-11-KD10 | Southco | AC-10-261-11-KD10 | 0 | |||
| 78330-010261 | Avdel | PATTE DE SUSPENSION BRUT INOX | 0 | |||
| AC-10-261-11-MK10 | Southco | AC-10-261-11-MK10 | 0 | |||
| 1026-125-SS | RAF Electronic Hardware | 0 | ||||
| 1026-125-B-5 | RAF Electronic Hardware | 0 | ||||
| 10261F | Heyco | HMCBP-24 V-0 NATURAL | 0 | |||
![]() FDH Electronics | 85010261 | SOURIAU-SUNBANK | Circular Conn |
| 300 | |
| A1026-1-0-4 | Amphenol Positronic | Uncategorized | 41 | |||
![]() Master Electronics | 102619-3 | TE Connectivity | 10 MODII HDR DRST SHRD .100CL RoHS : Not Compliant |
| 1,639 | |
| 5-102617-8 | TE Connectivity | 20 MODII HDR DRRA SHRD LF RoHS : Compliant |
| 1,590 | ||
| 102619-4 | TE Connectivity | 12 MODII HDR DRST SHRD .100CL RoHS : Not Compliant |
| 51 | ||
| 102617-3 | TE Connectivity | 10 MODII HDR DRRA SHRD .100CL RoHS : Not Compliant |
| 15 | ||
| SEC141026-104 | ITT Interconnect Solutions | SEC141026-104 / 141026-0104 / Circular RoHS : Compliant |
| 0 | ||
| 102617-2 | TE Connectivity | 08 MODII HDR DRRA SHRD .100CL RoHS : Not Compliant |
| 0 | ||
| 210261-000 | TE Connectivity | HT-SCE-1K-3/8-2.0-0 RoHS : Compliant |
| 0 | ||
| 1-102618-8 | TE Connectivity | 40 MODII HDR DRST SHRD .100CL RoHS : Not Compliant |
| 0 | ||
| 5-1102616-5 | TE Connectivity | Backshell Housing Die Cast Aluminum Gray RoHS : Compliant |
| 0 | ||
| 4151026-1 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 1-102618-3 | TE Connectivity | 30 MODII HDR DRST SHRD .100CL MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 121091-0261 | ITT Interconnect Solutions | Circular Connector - Box Mount - Contact Arrangement: 18-1 - Sockets - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
| 7940102618 | Weidmüller Interface GmbH & Co. KG | Circuit Breaker Hydraulic Magnetic 1Pole 25A 125VDC RoHS : Compliant |
| 0 | ||
| 6-102618-2 | TE Connectivity | 28 MODII HDR DRST SHRD .100CL MOQ Reduction RoHS : Compliant |
| 0 | ||
| SGE151026100A09500C | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1026130 | RS Pro | Multifunction Voltage Relay SPDT 12 To 24 VDC 1 Phase DIN Rail UL Listed |
| 50 | |
| 09200102614 | HARTING Technology Group | Heavy Duty Power Connectors Han A10 Pos M Insert Screw w/Wire Prot RoHS : Compliant |
| 50 | ||
| 1026128 | RS Pro | Time Delay Relay Delay Off Timer (Switch Initiated) SPDT 12-230VAC/VDC |
| 50 | ||
| RE10261 | ABB Low Voltage Products and Systems | Fixed Terminal Blocks INS NYL RING TERM, 6AN, NO10, BLUE |
| 50 | ||
| 1026133 | RS Pro | Multifunction Combined Voltage Relay SPDT 230 VAC/DC 1-Phase UL Listed |
| 50 | ||
| 1026127 | RS Pro | Time Delay Relay Asymmetrical Recycle Timer SPDT 12-230VAC/VDC |
| 45 | ||
| 7940102617 | Weidmüller Interface GmbH & Co. KG | Circuit Breakers QY-1-13-DM-U2-20.0-B1 125VDC POS BOT |
| 35 | ||
| 1026125 | RS Pro | Time Delay Relay Delay On DPDT 0.1 Second to 100 Hours 12-230VAC/VDC |
| 27 | ||
| 1026129 | RS Pro | Supply Initiated Interval Timer SPDT 12-230VAC/VDC 17.5mm DIN Rail |
| 23 | ||
| 7940102615 | Weidmüller Interface GmbH & Co. KG | Circuit Breakers QY-1-13-DM-U2-10.0-B1 125VDC POS BOT |
| 10 | ||
| 1026137 | RS Pro | Multifunction Monitoring Relay SPDT 400 VAC 3-Phase Screw Term UL Listed |
| 5 | ||
| 1026131 | RS Pro | Multifunction Voltage Relay SPDT 230 VAC 1-Phase DIN Rail UL Listed |
| 2 | ||
| 1026135 | RS Pro | Multifunction Monitoring Relay SPDT 280 To 520 VAC 3-Phase UL Listed |
| 1 | ||
| 10-2613.1075 | EAO AG | Single Color LEDs RoHS : Compliant |
| 0 | ||
| 10-2613.1072 | EAO AG | Single Color LEDs RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3CA1026-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to UMCX 2.5 Plug Cable 12 Inch Length Using RG178 Coax, RoHS., Radio frequency assembly SMA male to UMCX 2.5 plug cable 12 inch length using RG178 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to UMCX 2.5 plug cable 12 inch length using RG178 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX 2.5 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and UMCX 2.5 cable connection on the other. Our SMA to UMCX 2.5 cable assemblies have a male gender on end 1 and plug on end 2. This SMA to UMCX 2.5 cable is a male to plug coax assembly, PE3CA1026-12, can also be known as a SMA plug to UMCX 2.5 male cable assembly and will be shipped same-day as it is purchased. SMA plug to UMCX 2.5 male cable assembly PE3CA1026-12 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to UMCX 2.5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to UMCX 2.5 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1026-12 can also be used in the other direction and will be UMCX 2.5 plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to UMCX 2.5 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX 2.5 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to UMCX 2.5 plug cable 12 inch length using RG178 coax, RoHS. |
| 7 | |
| PE3C10261-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75, RF Cable Type: LMR-400-75, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Low Loss Cable 24 Inch Length Using 75 Ohm LMR-400-75 Coax With Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male low loss cable 24 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male low loss cable 24 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss a BNC to a BNC cable assembly has male gender on end 1 and male on end 2. PE3C10261-24 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has beryllium copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10261-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. BNC plug to BNC plug cable assembly PE3C10261-24 is built with LMR-400-75 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors and has a 75 Ohm impedance. Both the connectors have a crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W10261 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Female 2 Hole Flange to 1.85mm Male Cable Using PE-SR405FLJ Coax. PE3W10261 is a SMA female 2 hole flange to 1.85mm male cable using PE-SR405FLJ coax. This Pasternack SMA female 2 hole flange to 1.85mm male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 1.85mm for connector 2. Our female SMA 2 hole flange to male 1.85mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W10261 SMA female 2 hole flange to 1.85mm male cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3C10261-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75, RF Cable Type: LMR-400-75, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Low Loss Cable 12 Inch Length Using 75 Ohm LMR-400-75 Coax With Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male low loss cable 12 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male low loss cable 12 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss a BNC to a BNC cable assembly has male gender on end 1 and male on end 2. PE3C10261-12 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has beryllium copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10261-12 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. BNC plug to BNC plug cable assembly PE3C10261-12 is built with LMR-400-75 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors and has a 75 Ohm impedance. Both the connectors have a crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C10261/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: LMR-400-75, RF Cable Type: LMR-400-75, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 75 Ohm BNC Male Cable Using 75 Ohm LMR-400-75 Coax with HeatShrink. PE3C10261/HS is a BNC male to BNC male cable using LMR-400-75 coax. This Pasternack BNC male to BNC male cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3C10261/HS BNC male to BNC male cable assembly is constructed with LMR-400-75 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C10261-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75, RF Cable Type: LMR-400-75, RF Cable Impedance: 75 Ohm, Length, Max: 48 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Low Loss Cable 48 Inch Length Using 75 Ohm LMR-400-75 Coax With Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male low loss cable 48 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male low loss cable 48 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss a BNC to a BNC cable assembly has male gender on end 1 and male on end 2. PE3C10261-48 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has beryllium copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10261-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. BNC plug to BNC plug cable assembly PE3C10261-48 is built with LMR-400-75 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors and has a 75 Ohm impedance. Both the connectors have a crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C10261-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75, RF Cable Type: LMR-400-75, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Low Loss Cable 36 Inch Length Using 75 Ohm LMR-400-75 Coax With Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male low loss cable 36 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male low loss cable 36 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss a BNC to a BNC cable assembly has male gender on end 1 and male on end 2. PE3C10261-36 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has beryllium copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10261-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. BNC plug to BNC plug cable assembly PE3C10261-36 is built with LMR-400-75 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors and has a 75 Ohm impedance. Both the connectors have a crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C10261LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: LMR-400-75, RF Cable Type: LMR-400-75, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 75 Ohm BNC Male Cable Using 75 Ohm LMR-400-75 Coax with HeatShrink, LF Solder. PE3C10261LF/HS is a BNC male to BNC male cable using LMR-400-75 coax. This Pasternack BNC male to BNC male cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3C10261LF/HS BNC male to BNC male cable assembly is constructed with LMR-400-75 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C10261-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75, RF Cable Type: LMR-400-75, RF Cable Impedance: 75 Ohm, Length, Max: 60 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Low Loss Cable 60 Inch Length Using 75 Ohm LMR-400-75 Coax With Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male low loss cable 60 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male low loss cable 60 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss a BNC to a BNC cable assembly has male gender on end 1 and male on end 2. PE3C10261-60 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has beryllium copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10261-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. BNC plug to BNC plug cable assembly PE3C10261-60 is built with LMR-400-75 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors and has a 75 Ohm impedance. Both the connectors have a crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C10261 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75, RF Cable Type: LMR-400-75, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 75 Ohm BNC Male Low Loss Cable Using 75 Ohm LMR-400-75 Coax With Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male low loss cable using 75 Ohm LMR-400-75 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male low loss cable using 75 Ohm LMR-400-75 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss a BNC to a BNC cable assembly has male gender on end 1 and male on end 2. PE3C10261 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has beryllium copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10261 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. BNC plug to BNC plug cable assembly PE3C10261 is built with LMR-400-75 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors and has a 75 Ohm impedance. Both the connectors have a crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
![]() TE Connectivity | 5-102618-6 | TE Connectivity | 16 MODII HDR DRST SHRD .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 16 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5-102618-6 | Internal Number: 5-102618-6 | TE Connectivity RoHS : Compliant |
| 4,193 | |
| 2-321026-1 | TE Connectivity | SPLICE,PG BUTT 26-22 Primary Product Color: Yellow Splice Type: Butt Splice Wire Size: 26 – 22 AWG Wire Size: .12 – .4 mm² Wire Size: 202 – 810 CMA Yellow Butt Splice 26 – 22 AWG .12 – .4 mm² | Electrical Wire Splice | Part Number: 2-321026-1 | Internal Number: 2-321026-1 | TE Connectivity RoHS : Compliant |
| 4,000 | ||
| 5-102618-1 | TE Connectivity | 06 MODII HDR DRST SHRD .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 6 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5-102618-1 | Internal Number: 5-102618-1 | TE Connectivity RoHS : Compliant |
| 3,247 | ||
| 5-102619-1 | TE Connectivity | 06 MODII HDR DRST SHRD .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Number of Positions: 6 Number of Rows: 2 PCB Mount Header Vertical Board-to-Board 6 | PCB Header & Receptacle | Part Number: 5-102619-1 | Internal Number: 5-102619-1 | TE Connectivity RoHS : Compliant |
| 2,287 | ||
| 7-102619-3 | TE Connectivity | 50 MODII HDR DRST SHRD .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Number of Positions: 50 Number of Rows: 2 PCB Mount Header Vertical Board-to-Board 50 | PCB Header & Receptacle | Part Number: 7-102619-3 | Internal Number: 7-102619-3 | TE Connectivity RoHS : Compliant |
| 2,274 | ||
| 5-102618-5 | TE Connectivity | 14 MODII HDR DRST SHRD .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 14 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5-102618-5 | Internal Number: 5-102618-5 | TE Connectivity RoHS : Compliant |
| 2,241 | ||
| 5-102618-4 | TE Connectivity | 12 MODII HDR DRST SHRD .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 12 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5-102618-4 | Internal Number: 5-102618-4 | TE Connectivity RoHS : Compliant |
| 1,982 | ||
| 5-102619-4 | TE Connectivity | 12 MODII HDR DRST SHRD .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Number of Positions: 12 Number of Rows: 2 PCB Mount Header Vertical Board-to-Board 12 | PCB Header & Receptacle | Part Number: 5-102619-4 | Internal Number: 5-102619-4 | TE Connectivity RoHS : Compliant |
| 1,260 | ||
| 5-102617-8 | TE Connectivity | 20 MODII HDR DRRA SHRD LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Wire-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 20 PCB Mount Header Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 5-102617-8 | Internal Number: 5-102617-8 | TE Connectivity RoHS : Compliant |
| 1,248 | ||
| 6-102617-3 | TE Connectivity | 30 MODII HDR DRRA SHRD LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Wire-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 30 PCB Mount Header Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 6-102617-3 | Internal Number: 6-102617-3 | TE Connectivity RoHS : Compliant |
| 1,109 | ||
| 5-102618-2 | TE Connectivity | 08 MODII HDR DRST SHRD .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 8 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5-102618-2 | Internal Number: 5-102618-2 | TE Connectivity RoHS : Compliant |
| 859 | ||
| 8-321026-1 | TE Connectivity | SPLICE,PG BUTT 26-22 Primary Product Color: Yellow Splice Type: Butt Splice Wire Size: 26 – 22 AWG Wire Size: .12 – .4 mm² Wire Size: 202 – 810 CMA Yellow Butt Splice 26 – 22 AWG .12 – .4 mm² | Electrical Wire Splice | Part Number: 8-321026-1 | Internal Number: 8-321026-1 | TE Connectivity RoHS : Compliant |
| 752 | ||
| 6-102617-5 | TE Connectivity | 34 MODII HDR DRRA SHRD LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Wire-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 34 PCB Mount Header Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 6-102617-5 | Internal Number: 6-102617-5 | TE Connectivity RoHS : Compliant |
| 667 | ||
| 5-102619-3 | TE Connectivity | 10 MODII HDR DRST SHRD .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Number of Positions: 10 Number of Rows: 2 PCB Mount Header Vertical Board-to-Board 10 | PCB Header & Receptacle | Part Number: 5-102619-3 | Internal Number: 5-102619-3 | TE Connectivity RoHS : Compliant |
| 263 | ||
| 6-102618-0 | TE Connectivity | 24 MODII HDR DRST SHRD .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 24 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 6-102618-0 | Internal Number: 6-102618-0 | TE Connectivity RoHS : Compliant |
| 221 | ||
![]() Vyrian | 1-102617-0 | TE Connectivity | Board Connector, 24 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Receptacle RoHS : Not Compliant | 11,713 | ||
| 2-102618-3 | TE Connectivity | Board Connector, 50 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Receptacle RoHS : Not Compliant | 9,741 | |||
| TMX4C1026-10N | Texas Instruments | Nibble Mode DRAM, 1MX1, 100ns, CMOS, PDIP18 | 9,551 | |||
| TMX4C1026-12N | Texas Instruments | Nibble Mode DRAM, 1MX1, 120ns, CMOS, PDIP18 | 9,071 | |||
TMX4C1026-10DJ![]() | Texas Instruments | Nibble Mode DRAM, 1MX1, 100ns, CMOS, PDSO20 | 8,796 | |||
TMX4C1026-12DJ![]() | Texas Instruments | Nibble Mode DRAM, 1MX1, 120ns, CMOS, PDSO20 | 7,662 | |||
| SN102618N | Texas Instruments | 7,308 | ||||
| SL1026-1100 | Littelfuse Inc | 7,138 | ||||
MT4C1026-10![]() | Micron Technology Inc | Static Column DRAM, 1MX1, 100ns, CMOS, PDIP18 RoHS : Not Compliant | 6,422 | |||
| 102612 | Micron Technology, Inc | 5,434 | ||||
| MT4C1026-15 | Micron Technology Inc | Static Column DRAM, 1MX1, 150ns, CMOS, PDIP18 RoHS : Not Compliant | 4,528 | |||
| MT4C1026-10IT | Micron Technology Inc | Static Column DRAM, 1MX1, 100ns, CMOS, PDIP18 RoHS : Not Compliant | 3,314 | |||
| MT102615 | Micron Technology, Inc | 2,881 | ||||
| MT4C1026-12 | Micron Technology Inc | Static Column DRAM, 1MX1, 120ns, CMOS, PDIP18 RoHS : Not Compliant | 2,788 | |||
| 102613 | Micron Technology, Inc | 2,716 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |