| Electronic Components Datasheet Search |
|
10095 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Onlinecomponents.com | 10095 | SR Components Inc | RoHS : Compliant |
| 1 | |
| 10095 | Heyco | PCB Support, Bayonet Snap Fit 10.2/Arrowhead Snap Lock, HLSP4 Series | Heyco 10095 RoHS : Compliant |
| 0 | ||
| 42-10095 | Amphenol CONEC | SAL-8-RSWU3-10/K1 RoHS : Compliant |
| 0 | ||
| COM-10095 | SparkFun Electronics | BREAK AWAY HEADERS - RIGHT RoHS : Compliant |
| 0 | ||
![]() Verical | 1009570000 | Weidmüller Interface GmbH & Co. KG | Standard Brass Cable Gland, Multi-seal RoHS : Exempt |
| 239 | |
| 10095500-1050011LF | Amphenol FCi | AirMax VS® 85 ohm, Backplane Connectors, 5-Pair, 85Ohm, 150 -position, 2mm pitch, 10 column, Vertical Header RoHS : Compliant |
| 203 | ||
| 10095 | Libelium Comunicaciones Distribuidas SL | 10095 |
| 25 | ||
![]() Avnet Americas | TW-03-11-T-S-210-095 | Samtec Inc | - Bulk (Alt: TW-03-11-T-S-210-095) RoHS : Compliant |
| 0 | |
| MW-07-03-G-D-210-095 | Samtec Inc | - Rail/Tube (Alt: MW-07-03-G-D-210-095) RoHS : Compliant |
| 0 | ||
| TW-08-08-L-S-610-095 | Samtec Inc | - Bulk (Alt: TW-08-08-L-S-610-095) RoHS : Compliant |
| 0 | ||
| VM510-09-500 | Amphenol Corporation | - Bulk (Alt: VM510-09-500) RoHS : Compliant |
| 0 | ||
| 10-410095-56P | Amphenol Corporation | - Bulk (Alt: 10-410095-56P) RoHS : Not Compliant |
| 0 | ||
| 130010-0951 | Molex | MC 4P M/MFE 18M 90/ST 16/4 TPE - Bulk (Alt: 1300100951) RoHS : Compliant |
| 0 | ||
| 4-1601009-5 | TE Connectivity | Magnet Wire Terminal 34AWG to 18AWG 8.76mm Tin Solder Reel - Bulk (Alt: 4-1601009-5) RoHS : Not Compliant | 0 | |||
| 8-2151009-5 | TE Connectivity | - Bulk (Alt: 8-2151009-5) RoHS : Not Compliant | 0 | |||
| 5634-201-00958 | TE Connectivity | - Bulk (Alt: 5634-201-00958) RoHS : Compliant | 0 | |||
| 891-009-51SA2-BRT1T | Glenair Inc | - Bulk (Alt: 891-009-51SA2-BRT1T) RoHS : Not Compliant | 0 | |||
| 130010-0955 | Molex | MC 4P M/MFE 46M 90/ST 16/4 TPE - Bulk (Alt: 1300100955) RoHS : Compliant |
| 0 | ||
| 3742610095 | TE Connectivity | Speed sen DSS 1210.15 P7HV 11.99014-021 - Bulk (Alt: 3742610095) RoHS : Not Compliant |
| 0 | ||
| GWS10095109JLX000 | Vishay Intertechnologies | Resistor Wirewound 51 Ohm 5% 60W 100ppm/K to 180ppm/K Loose Pack - Bulk (Alt: GWS10095109JLX000) RoHS : Compliant |
| 0 | ||
| GWS10095100KLX000 | Vishay Intertechnologies | Resistor Wirewound 510 Ohm 10% 60W 100ppm/K to 180ppm/K Loose Pack - Bulk (Alt: GWS10095100KLX000) RoHS : Not Compliant |
| 0 | ||
| ETUO-R12-10-095-0-1-1-7-06 | Samtec Inc | FireFly Extended Temperature Active Optical - Bulk (Alt: ETUO-R12-10-095-0-1-1-7-06) RoHS : Compliant | 0 | |||
![]() Mouser Electronics | 1009-54 | The Bergquist Company | Thermal Interface Products Sil-Pad, 0.009" Thickness, Sil-Pad TSP 1200 Series / Sil-Pad 1000 Series RoHS : Compliant |
| 4,830 | |
| 1009-58 | The Bergquist Company | Thermal Interface Products Sil-Pad, 0.009" Thickness, Sil-Pad TSP 1200 Series / Sil-Pad 1000 Series RoHS : Compliant |
| 888 | ||
| 1009580 | Phoenix Contact | Pluggable Terminal Blocks FKC 2,5/ 2-ST-5,08 BKBDWHC2SO RoHS : Compliant | 28 | |||
| 1009580000 | Weidmüller Interface GmbH & Co. KG | Cable Glands, Strain Reliefs & Cord Grips VG M32-MS54 ZR 16-26 |
| 7 | ||
| 1009570000 | Weidmüller Interface GmbH & Co. KG | Cable Glands, Strain Reliefs & Cord Grips VG M25-MS54 ZR 8.5-18 |
| 1 | ||
| 10095 | Heyco | Standoffs & Spacers HLSP4-08 NATURAL NYL PCB Support RoHS : Compliant |
| 0 | ||
| 1009573 | Phoenix Contact | Pluggable Terminal Blocks FKC 2,5/ 2-ST-5,08 OG BDWH:PS RoHS : Compliant |
| 0 | ||
| 1009572 | Phoenix Contact | Pluggable Terminal Blocks FKC 2,5/ 2-ST-5,08 OGBDWHJ21SO RoHS : Compliant |
| 0 | ||
| 1009574 | Phoenix Contact | Pluggable Terminal Blocks FKC 2,5/ 2-ST-5,08 BKBDWHJ24SO RoHS : Compliant |
| 0 | ||
| 1009575 | Phoenix Contact | Pluggable Terminal Blocks FKC 2,5/ 2-ST-5,08 BKBDWHJ23SO RoHS : Compliant |
| 0 | ||
| 1009576 | Phoenix Contact | Pluggable Terminal Blocks FKC 2,5/ 2-ST-5,08 BKBDWHJ22SO RoHS : Compliant |
| 0 | ||
| 1009578 | Phoenix Contact | Pluggable Terminal Blocks FKC 2,5/ 2-ST-5,08 BKBDWHJ19SO RoHS : Compliant |
| 0 | ||
| 1009579 | Phoenix Contact | Pluggable Terminal Blocks FKC 2,5/ 2-ST-5,08 BKBDWHJ18SO RoHS : Compliant |
| 0 | ||
| 1009570 | Phoenix Contact | Pluggable Terminal Blocks FKC 2,5/ 3-ST-5,08 BKBDWHJ16SO RoHS : Compliant |
| 0 | ||
| 1009571 | Phoenix Contact | Pluggable Terminal Blocks FKC 2,5/ 3-ST-5,08 BKBDWHJ26SO RoHS : Compliant |
| 0 | ||
![]() Arrow Electronics | 10095 | Libelium Comunicaciones Distribuidas SL | 10095 |
| 25 | |
![]() Newark | MP010095 | SPC Multicomp | Connector Housing, Rcpt, 8Pos, 1Mm; |Multicomp Pro MP010095 RoHS : Compliant |
| 4,970 | |
| 560112110095 | Wurth Elektronik | Resistor, 1K5, 0.1W, Thick Film, 0402; |Würth Elektronik 560112110095 RoHS : Compliant |
| 4,370 | ||
| 560112110095 | Wurth Elektronik | Resistor, 1K5, 0.1W, Thick Film, 0402; |Würth Elektronik 560112110095 RoHS : Compliant |
| 4,370 | ||
| TW-02-11-T-D-210-095 | Samtec Inc | Conn Stack Brd, 2Mm, 4Pos, Hdr; |Samtec, Inc. TW-02-11-T-D-210-095 RoHS : Compliant |
| 372 | ||
| TW-03-05-L-D-310-095 | Samtec Inc | Conn Stack Brd, 2Mm, 6Pos, Hdr; |Samtec, Inc. TW-03-05-L-D-310-095 RoHS : Compliant |
| 327 | ||
| ZW-20-10-L-D-510-095 | Samtec Inc | Conn Stack Brd, 2.54Mm, 40Pos, Hdr; |Samtec, Inc. ZW-20-10-L-D-510-095 RoHS : Compliant |
| 305 | ||
| TW-04-11-T-D-210-095 | Samtec Inc | Conn Stack Brd, 2Mm, 8Pos, Hdr; |Samtec, Inc. TW-04-11-T-D-210-095 RoHS : Compliant |
| 294 | ||
| TW-05-11-T-D-210-095 | Samtec Inc | Conn Stack Brd, 2Mm, 10Pos, Hdr; |Samtec, Inc. TW-05-11-T-D-210-095 RoHS : Compliant |
| 271 | ||
| TW-20-09-G-S-210-095 | Samtec Inc | Conn Stack Brd, 2Mm, 20Pos, Hdr; |Samtec, Inc. TW-20-09-G-S-210-095 RoHS : Compliant |
| 157 | ||
| HW-20-20-G-D-810-095 | Samtec Inc | Conn Stack Brd, 2.54Mm, 40Pos, Hdr; |Samtec, Inc. HW-20-20-G-D-810-095 RoHS : Compliant |
| 107 | ||
| 311-00959 | HellermannTyton | Heatshrink, 2:1, 9.5Mm, 1.2M; |Hellermanntyton 311-00959 RoHS : Compliant |
| 52 | ||
| FMSMA1009-50PK | Fairview Microwave Inc | 1880-1900 Mhz, 3 Dbi, Stamped Metal Dect; |Fairview Microwave FMSMA1009-50PK RoHS : Not Compliant |
| 10 | ||
| FMAD10095 | Fairview Microwave Inc | Rf Adaptor, Sma Plug-Sma Rp Jack, 50 Ohm; |Fairview Microwave FMAD10095 RoHS : Not Compliant |
| 4 | ||
| SZ1009.59.53 | SCS | Side Gusset, 9.5" X 9.5", 71.12Um; Bag Type:Static Shielding (Metal-In); Width - Imperial:9.5"; Length - Imperial:9.5"; Length - Metric:241.3Mm; Film Thickness:71.12Μm; Bag Color:-; Seal Type:Heat Seal; Product Range:1000 Series Rohs Compliant: Na RoHS : Not Compliant |
| 3 | ||
| 17-100950 | Amphenol CONEC | Protective Cover, Plug, Brass; |Amphenol Conec 17-100950 RoHS : Compliant |
| 2 | ||
![]() RS | ETP10095 | EI Sensor Technologies | THERMISTOR PROBE, STRAIGHT, FLAG, 10 KOHM, 1%, TEFLON, 150 DEGC, ETP SERIES |
| 977 | |
| 192991-0095 (T3P22MC1LZ) | ITT Interconnect Solutions | MACHINED SOCKET CONTACTS TO CRIMP AWG 22 |
| 351 | ||
| RL1009-5820-97-D1 | Amphenol Advanced Sensors | THERMISTOR, HIGH SENSITIVITY, NTC, RES 10 KILOHMS, TOL +/-10%,RADIAL, DISC,-50C,+150C |
| 283 | ||
| 100-95-501B | Protective Industrial Products | CLEANROOM PAPER, BLUE, 250 SHEETS PER PACK, 8.5X11, 22# |
| 4 | ||
| BC10-S30-Y1X-0.28-RSV4.21T (2010095) | TURCK Inc | CAPACITIVE SENSOR, M30X1.5, PLASTIC, CABLE 4-WIRE, 8.2 VDC, POTENTIOMETER |
| 4 | ||
| FRM100/9,5 (FRM10095) | FAG Bearings | LOCKING RINGS FRM |
| 2 | ||
| 1009581CH | Eaton Cutler-Hammer | 200A METER BREAKER, RINGLESS, OH, SMALL HUB OPENING, CECHA A |
| 0 | ||
| 11-21-0095 | Molex | REGULATOR |
| 0 | ||
| CQ2WL100-95DZ | SMC Corporation of America | COMPACT CYLINDER, CQ2-Z SERIES |
| 0 | ||
| 54242806100950LF | Amphenol FCi | BERGSTIK STACKING HDR DR SMT |
| 0 | ||
| MGPM100-95BZ-XC8 | SMC Corporation of America | GUIDED CYLINDER, AIR, MGP-Z SERIES |
| 0 | ||
| CQ2F100-95DZ-XC6 | SMC Corporation of America | COMPACT CYLINDER, CQ2-Z SERIES |
| 0 | ||
| C96SDB100-950C-X142US | SMC Corporation of America | CYLINDER, TIE ROD, AIR, C96 SERIES |
| 0 | ||
| 7100020897 (00048011009551) | 3M | ScotchBrite Clean and Strip Disc, CSDC, SiC Extra Coarse, 7 in x 7/8 in |
| 0 | ||
| 1543317 (SAC-4P-10 0-950/M 8FS) | Phoenix Contact | CABLE ASSEMBLY; FEMALE;WIRE LEADS;ROUND;SHIELDED;32.8FT;10.00M;4-POSITION |
| 0 | ||
![]() Microchip Technology Inc | VX-501-0095-491M52 | Microchip Technology Inc | VX-501-0095-491M52, Projected EOL: 2051-02-11 - Contact for Pricing | 119 | ||
![]() Future Electronics | 10095 | Heyco | RoHS : Compliant |
| 0 | |
![]() Sager | 9860610095 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | ||
| MW-07-03-G-D-210-095 | Samtec Inc | Board to Board & Mezzanine Connectors 1.00 mm Flex Stack, Flexible Micro Board Stacker, Surface Mount RoHS : Compliant |
| 0 | ||
| 8860-0062-100-95 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding Sheet,EcE095 | 0 | |||
| TW-01-03-G-S-310-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-08-03-S-D-310-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-12-03-G-Q-310-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-12-03-T-S-210-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-15-03-T-S-310-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-16-03-G-D-210-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-23-03-T-Q-210-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-25-03-G-Q-310-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-25-03-T-S-210-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-03-03-S-S-310-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-04-03-G-Q-210-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-07-03-T-D-310-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() TME | 173111-0095 | Molex | Enclosure for connectors: D-Sub; for cable; side; shielded; 10mm |
| 361 | |
| 10095 | HELUKABEL | Wire; JZ-500; JZ; 5G1.5mm2; unshielded; 300V,500V; Cu; stranded RoHS : Compliant |
| 209 | ||
| 10095500-1050011LF | Amphenol Corporation | Connector: DIN 41612; data; PIN: 150; straight; Press-Fit |
| 203 | ||
| 100951 | MCI Transformer Corporation | Patch cord; S/FTP; Cat 7; RJ45 left angled plug,both sides; 2m |
| 20 | ||
| 10.095 | Proctor & Gamble | Drill bit; for metal; Ø: 9.5mm; high speed steel; blister |
| 9 | ||
| 100950 | MCI Transformer Corporation | Patch cord; S/FTP; Cat 7; RJ45 left angled plug,both sides; 1.5m |
| 6 | ||
| 0010100950100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 9.5mm; L: 250mm; high speed steel; case |
| 1 | ||
| 09304100951 | HARTING Technology Group | Enclosure for connectors: HDC; IP65 RoHS : Compliant |
| 0 | ||
| 0011100950100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 9.5mm; L: 320mm; high speed steel; case |
| 0 | ||
| 004110095 | ETI Polam | Fuse: fuse; NH1; ceramic,industrial; 200A; 80VDC; gBat; WT-NH |
| 0 | ||
| 0060100950100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 9.5mm; high speed steel; bulk,industrial |
| 0 | ||
| 0-10-095 | Stanley Black & Decker Inc | Knife; universal; Tool length: 135mm; W: 9mm; metal; INTERLOCK |
| 0 | ||
| RHA1009560M050K | Kyocera AVX Components | Capacitor: hybrid; H: 9.5mm; 56uF; 50VDC; 2.3A; SMD; ESR: 25mΩ; RHA RoHS : Compliant |
| 0 | ||
| RFA110095 | Lovato Electric Inc | Thermal relay; screw terminals; 70÷95A; Resetting: automatic |
| 0 | ||
| 42010095 | Stahlwille Tools | Wrench: ring; single sided,impact; 95mm; L: 450mm; chromium steel |
| 0 | ||
![]() ComSIT USA | F020100955 | Vishay Intertechnologies | AVAILABLE EU | 4,127 | ||
![]() Interstate Connecting Components | 10095 | Power Dynamics Inc | AMERICAN ELECTRONIC JUMPER COR RoHS : Compliant |
| 35 | |
| 943-99657-10095 | Amphenol Fiber Optic Products | JUMPER, TRACEABLE PC, OM4, DUP LEX, LC TO LC | 0 | |||
| 943-99656-10095 | Amphenol Fiber Optic Products | JUMPER, TRACEABLE PC, OM4, SIM PLEX, LC TO LC | 0 | |||
| 154181-0095 MS | ITT Interconnect Solutions | M8351332-G01NW | 0 | |||
| 10-410095-56P | Amphenol Aerospace | RECEPT 10-410095-56P | 0 | |||
| 943-99692-10095 | Amphenol Fiber Optic Products | JUMPER MPO(F), 12F 3MM OM4 W/P ERROR:#REF! | 0 | |||
| 891-009-51SA2-BRT1T | Glenair Inc | DUAL ROW NANO RECPT RIGHT ANGLE MOUNT RoHS : Not Compliant | 0 | |||
| 120001-0095 | ITT Interconnect Solutions | CIRCULAR MIL SPEC CONNECTOR |
| 0 | ||
| 3742610095 | TE Connectivity | SPEED SEN DSS 1210.15 P7HV 11. | 0 | |||
| 942-98344-10095 | Amphenol Fiber Optic Products | JUMPER LC/UPC(D) W/ PUSH PULL ERROR:#REF! | 0 | |||
| 943-99695-10095 | Amphenol Fiber Optic Products | JUMPER, MPO(F)FLEX BOOT, 24F 3 ERROR:#REF! | 0 | |||
| 891-009-51SA1-BRT1J | Glenair Inc | DUAL ROW NANO RECPT RIGHT ANGLE MOUNT RoHS : Not Compliant | 0 | |||
| 943-99684-10095 | Amphenol Fiber Optic Products | JUMPER, MPO(F)FLEX BOOT, 12F 3 ERROR:#REF! | 0 | |||
| ZPF000000000100959 | TE Connectivity | DBAS 76G 19-0 PN 090 SCC | 0 | |||
| 891-009-51SS-BRT3T | Glenair Inc | DUAL ROW NANO RECPT RIGHT ANGLE MOUNT RoHS : Not Compliant | 0 | |||
![]() PEI Genesis | 7310095 | SOURIAU-SUNBANK |
| 0 | ||
| RL1100-95-L1200 | Amphenol Corporation |
| 0 | |||
| RL1100-95-L300 | Amphenol Corporation |
| 0 | |||
| RL1100-95-L600 | Amphenol Corporation |
| 0 | |||
| RL2100-95-L2400-RE-M8 | Amphenol Corporation |
| 0 | |||
| RL2100-95-L2800-BK-M8 | Amphenol Corporation |
| 0 | |||
| 192991-0095 | ITT Interconnect Solutions |
| 0 | |||
| RL2100-95-L2800-RE-M8 | Amphenol Corporation |
| 0 | |||
![]() Richardson RFPD | SI5341A-D10095-GMR | Skyworks Solutions Inc | Low-Jitter, 10 or 4-Output, Any-Frequency, Any-Out RoHS : Compliant | 0 | ||
| 325541009-50 | TE Connectivity | Board Level Pressure Sensor RoHS : Not Compliant | 0 | |||
| SI5341A-D10095-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 1028MHz-OUT 64- RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | 1601009-5 | TE Connectivity | INSTOCK RoHS : Compliant | 312,000 | ||
| 4-1601009-5 | TE Connectivity | INSTOCK RoHS : Compliant | 103,805 | |||
| D12 100 95K3 1% P5 | Vishay Draloric | INSTOCK | 24,000 | |||
| CRCW0805 100 9.53K 1%RT1 | INSTOCK | 4,482 | ||||
| 007LF82710095N1 | INSTOCK | 81 | ||||
![]() Avnet Abacus | 1009566 | Phoenix Contact | FKC 25 5ST508 BKBDWHJ4 FKC255ST508BKBDWHJ4 (Alt: 1009566) RoHS : Compliant | 0 | ||
| 1009579 | Phoenix Contact | FKC 25 2ST508 BKBDWHJ18SO FKC252ST508BKBDWHJ18SO (Alt: 1009579) RoHS : Compliant | 0 | |||
| 1009573 | Phoenix Contact | FKC 25 2ST508 OG BDWHPS FKC252ST508OGBDWHPS (Alt: 1009573) RoHS : Compliant | 0 | |||
| 1009574 | Phoenix Contact | FKC 25 2ST508 BKBDWHJ24SO FKC252ST508BKBDWHJ24SO (Alt: 1009574) RoHS : Compliant | 0 | |||
| 10095247 | Qnity Laird | Tflex 280V0 36x55 10095247 (Alt: 10095247) RoHS : Compliant | 0 | |||
| 8-2151009-5 | TE Connectivity | (Alt: 8-2151009-5) RoHS : Not Compliant | 0 | |||
| 10095504-101LF | Amphenol Corporation | Conn Daughter Card RCP 150 POS 2mm Press Fit RA ThruHole (Alt: 10095504-101LF) RoHS : Compliant | 0 | |||
| 145047100950829 | Kyocera AVX Components | Conn Stacking PL 100 POS 5mm Stack Height 05mm Solder ST SMD Emboss TR (Alt: 145047100950829+) RoHS : Compliant | 0 | |||
| 54122-108-10-0950 | Amphenol Corporation | BERGSTIK STR (Alt: 54122-108-10-0950) RoHS : Not Compliant | 0 | |||
| GWS10095109KLX000 | Vishay Intertechnologies | Resistor 51 Ohm 10 60 W Wirewound High Power High Pulse Solder Lug - Tape and Reel (Alt: GWS10095109KLX000) RoHS : Compliant | 0 | |||
| 10095500-1050011LF | Amphenol Corporation | Conn Hard Metric HDR 150 POS 2mm Press Fit ST ThruHole (Alt: 10095500-1050011LF) RoHS : Compliant | 0 | |||
| BPCD00100954221K0E | Pulse Electronics Corporation | Inductors SMD (Alt: BPCD00100954221K0E) RoHS : Compliant | 0 | |||
| TW-04-11-T-D-210-095 | Samtec Inc | (Alt: TW-04-11-T-D-210-095) RoHS : Compliant | 0 | |||
| TW-06-03-S-S-310-095 | Samtec Inc | Stacking Board Connector TW Series 6 Contacts Header 2 mm Through Hole 1 Rows (Alt: TW-06-03-S-S-310-095) RoHS : Compliant | 0 | |||
| ZW-06-12-F-S-610-095-003 | Samtec Inc | (Alt: ZW-06-12-F-S-610-095-003) RoHS : Compliant | 0 | |||
![]() Avnet Silica | VX-501-0095-491M52 | Microchip Technology Inc | VX5010095491M52 (Alt: VX-501-0095-491M52) RoHS : Compliant | 0 | ||
![]() Component Electronics, Inc | AX100954 | Nordex | IN STOCK SHIP TODAY | 410 | ||
| AX100955 | Belden Inc | IN STOCK SHIP TODAY |
| 70 | ||
| 1009-58 | The Bergquist Company | IN STOCK SHIP TODAY |
| 46 | ||
| 5961-00-950-3774 | International Rectifier | IN STOCK SHIP TODAY | 14 | |||
| AX100956 | Nordex | IN STOCK SHIP TODAY | 10 | |||
| 10095-05373 | IN STOCK SHIP TODAY | 8 | ||||
![]() DB Roberts | 10095 | Essentra Components | 0 | |||
| 10095 | Heyco | HLSP4-08 NATURAL | 0 | |||
| E3-1210-095 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 100958 | Pop Rivets | TLPK524BS 002 B8K | 0 | |||
| E3-1010-0959 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 1009540000VR | Essentra Components | 0 | ||||
| E3-2710-095 | Southco | 0 | ||||
| E3-1210-0959 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 161009515402 | Essentra Components | 0 | ||||
| 100959 | Pop Rivets | TLPK440SS 002 B10K | 0 | |||
| 01610-09595 | Avdel | AVEX RIV 18 CK ALST 01604-0041 | 0 | |||
| E3-1410-095 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 100956 | Pop Rivets | TLPK530SS 002 B8K | 0 | |||
| E3-1010-095 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
![]() Master Electronics | 10095 | SR Components Inc | RoHS : Compliant |
| 1 | |
| MW-07-03-G-D-210-095 | Samtec Inc | 1.00 mm Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| AW-09-03-G-D-210-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-01-03-G-S-310-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-05-03-S-D-210-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-08-03-S-D-310-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-12-03-G-Q-310-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-12-03-T-S-210-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-15-03-T-S-310-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-16-03-G-D-210-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-23-03-T-Q-210-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-26-03-S-S-210-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-26-03-T-Q-310-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-34-03-G-D-210-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1009570000 | Weidmüller Interface GmbH & Co. KG | Cable Gland for Klippon Protect Enclosure System Brass 8.5mm to 18mm Cable Diameter RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1009580000 | Weidmüller Interface GmbH & Co. KG | Cable Glands, Strain Reliefs & Cord Grips VG M32-MS54 ZR 16-26 RoHS : Compliant |
| 7 | |
| 1009570000 | Weidmüller Interface GmbH & Co. KG | Cable Glands, Strain Reliefs & Cord Grips VG M25-MS54 ZR 8.5-18 RoHS : Compliant |
| 1 | ||
![]() Pasternack Enterprises US | PE410-09593 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: TRT, Connector Gender: Plug, Impedance: 78 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 500 MHz, Interface Type 1: TRT PLUG. 78 Ohm TRT Plug Bulkhead Mount 1553 Connector Solder Attachment TRT PLUG,. PE410-09593 TRT plug bulkhead triaxial connector has an interface type of TRT plug trt plug and a 78 Ohm impedance.Pasternack TRT plug bulkhead connector uses shield/contact solder/solder as an attachment method. Our plug TRT triaxial connector provides a minimum frequency of DC and a maximum frequency of 500 MHz. The Pasternack TRT triaxial connector has a brass body with nickel plating. This TRT plug bulkhead triaxial RF connector is REACH compliant. Our high quality PE410-09593 features a ASTM-B-733 body plating specification. We also build TRT custom connector cable assemblies that will ship the same day as well. Our bulkhead TRT plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. For further information on similar products, our expert technical support and trained sales team can get you to the perfect RF connector as per your requirement. |
| 449 | |
| PESMA1009-50PK | Pasternack Enterprises | Key Specifications. Antenna Type Stamped Metal Polarization Linear Minimum Frequency 1.88 GHz Maximum Frequency 1.9 GHz Impedance 50 Ohm Maximum Input VSWR 2:1. 1880-1900 MHz, 3 dBi, Stamped Metal DECT Embedded Antenna-50 Pack., Linear polarized antenna PESMA1009-50PK from Pasternack is part of our extensive in-stock omni directional antennas that ship the same day from our ISO 9001:2015 certified facility. The stamped metal antenna has a maximum frequency of 1900 MHz and a minimum frequency of 1880 MHz. This 50-pack stamped metal antenna has a maximum input VSWR of 2:1. This stamped metal antenna has an overall length of 1.14 inches and a width of 0.6 inches. Pasternack’s PESMA1009-50PK is a single band antenna operating from 1880 to 1900 MHz with a 3 dBi gain. Our high-quality 50-pack omni directional antenna has an impedance of 50 Ohms. Pasternack's experts are on hand to assist you with any inquiries. Order this PESMA1009-50PK 50-pack stamped metal antenna 7 days a week, 24 hours a day, using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping. Our knowledgeable sales team and ability in the global availability market allow us to lead the industry in supplying RF products like these omni directional antennas. |
| 90 | ||
| PE910095 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Connector Series 3: BNC, Connector Gender 3: Female, Connector Polarity 3: Standard, Connector Impedance 3: 50 Ohm, Adapter Body Style: Tee, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Nickel, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel, Connector Mount Method 3: None, Connector Body Material 3: Brass, Connector Body Plating 3: Nickel. Commercial Grade BNC Tee Adapter Female-Female-Female., The commercial grade T-shaped BNC adapter PE910095 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance. This RF adapter has a female-female-female gender configuration, which provides easier connections in tighter spaces. This BNC female-female-female adapter is one of the many RF components that ship the same business day as they are ordered. The PE910095 BNC adapter has a T-shaped body. This Pasternack T-shaped BNC adapter is also known as a BNC T connector and is available in a commercial grade design. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. This commercial grade RF adapter has a 1.28-inch length, 0.91-inch width, and 0.8 lbs weight. The PE910095 adapter from Pasternack is made from a brass connector body. Our BNC female-female-female T-shaped radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. Additional dimensions and specifications for this in-series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of BNC T-shaped radio frequency adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality RF adapter that meets your requirements. |
| 42 | ||
| PE3C10095 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Female Bulkhead to N Male Cable Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to N male cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to N male cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has female gender on end 1 and male on end 2. PE3C10095 can also be known as a 3.5mm jack to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to type N plug cable assembly PE3C10095 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10095 can also be used in the other direction and will be type N male to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements. | 0 | |||
| PE3W10095 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. BNC Male to 7/16 DIN Male Cable Using LMR-400-UF Coax. PE3W10095 is a BNC male to 7/16 DIN male cable using LMR-400-UF coax. This Pasternack BNC male to 7/16 DIN male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male BNC to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10095 BNC male to 7/16 DIN male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C10095-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 3.5mm Female Bulkhead to N Male Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to N male cable 12 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to N male cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has female gender on end 1 and male on end 2. PE3C10095-12 can also be known as a 3.5mm jack to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to type N plug cable assembly PE3C10095-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10095-12 can also be used in the other direction and will be type N male to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10095-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 3.5mm Female Bulkhead to N Male Cable 9 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to N male cable 9 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to N male cable 9 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has female gender on end 1 and male on end 2. PE3C10095-9 can also be known as a 3.5mm jack to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to type N plug cable assembly PE3C10095-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10095-9 can also be used in the other direction and will be type N male to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10095-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 3.5mm Female Bulkhead to N Male Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to N male cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to N male cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has female gender on end 1 and male on end 2. PE3C10095-24 can also be known as a 3.5mm jack to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to type N plug cable assembly PE3C10095-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10095-24 can also be used in the other direction and will be type N male to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10095-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 3.5mm Female Bulkhead to N Male Cable 6 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to N male cable 6 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to N male cable 6 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has female gender on end 1 and male on end 2. PE3C10095-6 can also be known as a 3.5mm jack to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to type N plug cable assembly PE3C10095-6 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10095-6 can also be used in the other direction and will be type N male to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10095-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 3.5mm Female Bulkhead to N Male Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to N male cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to N male cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has female gender on end 1 and male on end 2. PE3C10095-18 can also be known as a 3.5mm jack to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to type N plug cable assembly PE3C10095-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10095-18 can also be used in the other direction and will be type N male to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements. |
| 0 | ||
![]() Vyrian | MT5C1009-55AT | Micron Technology Inc | Standard SRAM, 128KX8, 55ns, CMOS, PDIP32 RoHS : Not Compliant | 6,196 | ||
| MT5C1009-55IT | Micron Technology Inc | Standard SRAM, 128KX8, 55ns, CMOS, PDIP32 RoHS : Not Compliant | 5,984 | |||
| MT5C1009-55DJLAT | Micron Technology Inc | SRAM | 4,726 | |||
MT5C1009-55LIT![]() | Micron Technology Inc | Standard SRAM, 128KX8, 55ns, CMOS, PDIP32 RoHS : Not Compliant | 4,542 | |||
| MT5C1009-55DJAT | Micron Technology Inc | SRAM | 4,519 | |||
MT5C1009-55L![]() | Micron Technology Inc | Standard SRAM, 128KX8, 55ns, CMOS, PDIP32 RoHS : Not Compliant | 4,518 | |||
| MT5C1009-55 | Micron Technology Inc | Standard SRAM, 128KX8, 55ns, CMOS, PDIP32 RoHS : Not Compliant | 3,976 | |||
MT5C1009-55LXT![]() | Micron Technology Inc | Standard SRAM, 128KX8, 55ns, CMOS, PDIP32 RoHS : Not Compliant | 3,769 | |||
| MT5C1009-55DJXT | Micron Technology Inc | SRAM | 3,665 | |||
| MT5C1009-55DJLXT | Micron Technology Inc | SRAM | 3,332 | |||
| MT5C1009-55DJIT | Micron Technology Inc | SRAM | 3,186 | |||
| MT5C1009-55WIT | Micron Technology Inc | SRAM | 3,012 | |||
| MT5C1009-55WAT | Micron Technology Inc | SRAM | 2,757 | |||
| MT5C1009-55DJLIT | Micron Technology Inc | SRAM | 2,740 | |||
MT5C1009-55LAT![]() | Micron Technology Inc | Standard SRAM, 128KX8, 55ns, CMOS, PDIP32 RoHS : Not Compliant | 2,382 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |