 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
0922 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 TME | 214092-2020 | Molex | Connector: wire-board; female; Automotive; PIN: 2; straight; 1mm |
| 5,000 | |
| 173109-2263 | Molex | Connector: D-Sub; male; data transfer; straight; copper alloy; 5A |
| 250 | ||
| 173109-2222 | Molex | Connector: D-Sub; PIN: 25; socket; data transfer; angled; soldering |
| 182 | ||
| 4300.0922 | Schurter Electronic Components | Connector: AC supply; plug; male; power supply; 20A; 250VAC; black RoHS : Compliant |
| 131 | ||
| 3060922 | Bossard Group | Nut; hexagonal; M4; 0.7; A2 stainless steel; 7mm; BN 5242; DIN 980V |
| 100 | ||
| 10-922 | NEO TOOLS | Screwdriver bit: Torx®; TX40; 3/8"; Overall len: 30mm; 2pcs. |
| 7 | ||
| 0922 | IBO | Pump: submersible; KBFU; 400VAC; IP68; max35°C; Ins.class: F; 50Hz |
| 0 | ||
| 0001.2709.22 | Schurter Electronic Components | Fuse: fuse; 5.2x20mm; ceramic; SMD; 3.15A; 250VAC; 300VDC; time-lag RoHS : Compliant |
| 0 | ||
| 092-2-040-0-S-BS0 | MPE-Garry GmbH | Connector: IDC; socket; male; data; PIN: 40; straight; THT; 2.54mm RoHS : Compliant |
| 0 | ||
| 09221326919 | HARTING Technology Group | Connector: DIN 41612; socket; male; data; PIN: 32; angled 90°; 2A RoHS : Compliant |
| 0 | ||
| 2500.09.225.0 | igus Inc | Cable chain; 2500; Bend.rad: 225mm; L: 1012mm; Int.height: 25mm |
| 0 | ||
| 49.7092-25 | Stäubli Electrical Connectors | Laboratory connector: 4mm banana; socket; 1kV; 32A; green RoHS : Compliant |
| 0 | ||
| 6092-212 | GEBO | Splice terminal: 90° elbow; male-female; max.10.5bar; G316 |
| 0 | ||
| 092-2-026-0-F-BS0 | MPE-Garry GmbH | Connector: IDC; socket; male; data; PIN: 26; straight; THT; 2.54mm RoHS : Compliant |
| 0 | ||
| 092-2-034-0-F-BS0 | MPE-Garry GmbH | Connector: IDC; socket; male; data; PIN: 34; straight; THT; 2.54mm RoHS : Compliant |
| 0 | ||
 Verical | 09225PB-B3L-EA-00 | Minebea Co Ltd | AC Axial Fans RoHS : Exempt |
| 790 | |
| 09222326825 | HARTING Technology Group | Conn DIN 41612 RCP 32 POS 2.54mm Solder ST Thru-Hole Box RoHS : Compliant |
| 188 | ||
| 09222326825 | HARTING Technology Group | Conn DIN 41612 RCP 32 POS 2.54mm Solder ST Thru-Hole Box RoHS : Compliant |
| 130 | ||
| 09222326824 | HARTING Technology Group | Conn DIN 41612 RCP 32 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 92 | ||
| 09222326850 | HARTING Technology Group | Conn DIN 41612 RCP 32 POS 2.54mm Press Fit ST Thru-Hole RoHS : Compliant |
| 82 | ||
| 09222326824 | HARTING Technology Group | Conn DIN 41612 RCP 32 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 70 | ||
| 09225SE24QFTDW | NMB Technologies Corporation | DC Fan Axial Ball Bearing 24V 12V to 27.6V 65CFM 40dB 92 X 92 X 25mm RoHS : Compliant |
| 70 | ||
| 09225VE-12Q-CT-00 | NMB Technologies Corporation | 09225VE-12Q-CT-00 |
| 58 | ||
| 09222326824 | HARTING Technology Group | Conn DIN 41612 RCP 32 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 50 | ||
| 09.22000.39 | EOZ Secme | Switch Slide N.O. 4PST Top Slide 0.5A 24VAC 24VDC 6VA PC Pins Thru-Hole RoHS : Compliant |
| 30 | ||
| 09222326825 | HARTING Technology Group | Conn DIN 41612 RCP 32 POS 2.54mm Solder ST Thru-Hole Box RoHS : Compliant |
| 29 | ||
| 09221326921 | HARTING Technology Group | Conn Backplane HDR 32 POS 2.54mm Solder RA Thru-Hole Box RoHS : Compliant |
| 21 | ||
| 09222326825 | HARTING Technology Group | Conn DIN 41612 RCP 32 POS 2.54mm Solder ST Thru-Hole Box RoHS : Compliant |
| 20 | ||
| 09222326824 | HARTING Technology Group | Conn DIN 41612 RCP 32 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 4 | ||
| 09221326921 | HARTING Technology Group | Conn Backplane HDR 32 POS 2.54mm Solder RA Thru-Hole Box RoHS : Compliant |
| 3 | ||
 Avnet Americas | GPHB201-0922A417R1SA | Greenconn Corp | - Boxed Product (Development Kits) (Alt: GPHB201-0922A417R1SA) RoHS : Not Compliant |
| 4,000 | |
| 350922-3 | TE Connectivity | - Tape and Reel (Alt: 350922-3) RoHS : Compliant |
| 3,000 | ||
| MK-242-009-225-2200 | Molex | I/O Connector, Receptacle, Micro-D Subminiature Connector, 9 Contacts, Gold, Brass, Straight, Solder - Trays (Alt: MK-242-009-225-2200) RoHS : Not Compliant |
| 60 | ||
| NK-2B2-009-225-TH00 | Molex | I/O Connector, Receptacle, Nano-D Subminiature Connector, 9 Contacts, Gold, Beryllium Copper, Solder - Tape and Reel (Alt: NK-2B2-009-225-TH00) RoHS : Not Compliant |
| 10 | ||
| NK-1D2-009-225-TH00 | Molex | I/O Connector, Receptacle, Nano-D Subminiature Connector, 9 Contacts, Gold, Beryllium Copper, Solder - Tape and Reel (Alt: NK-1D2-009-225-TH00) RoHS : Not Compliant |
| 5 | ||
| MTSW-109-22-L-S-145 | Samtec Inc | Pin Header, Board-to-Board, 1 Rows, 9 Contacts, Through Hole, MTSW Series, Unshrouded, Straight - Bulk (Alt: MTSW-109-22-L-S-145) RoHS : Compliant |
| 0 | ||
| MMSD-09-22C-L-20.60-D-K-LDX | Samtec Inc | Cable Assembly Discrete Wire 22AWG 0.52m 18 Position Discrete Wire Housing to 18 Position Discrete - Bulk (Alt: MMSD-09-22C-L-20.60-D-K-LDX) RoHS : Compliant |
| 0 | ||
| RM322-092-201-5500 | Molex | Connector, Receptacle, 92 Contacts, 3 Rows, 1.91 mm, Gold, Beryllium Copper, Brass, Through Hole - Bulk (Alt: RM322-092-201-5500) RoHS : Not Compliant |
| 0 | ||
| RM322-092-231-5503 | Molex | Connector, Receptacle, 92 Contacts, 3 Rows, 1.91 mm, Gold, Beryllium Copper, Brass, Through Hole - Bulk (Alt: RM322-092-231-5503) RoHS : Not Compliant |
| 0 | ||
| HMTSW-109-22-T-S-310-RA | Samtec Inc | - Bulk (Alt: HMTSW-109-22-T-S-310-RA) RoHS : Compliant |
| 0 | ||
| 15466-0922 | Molex | Ribbon Cable, 22 Conductors, 0.5mm, 229mm L, 500mA, 60V, Premo-Flex 15466 Series, Same Side - Bulk (Alt: 0154660922) RoHS : Compliant |
| 0 | ||
| 10136656-0922LF | Amphenol Corporation | - Trays (Alt: 10136656-0922LF) RoHS : Not Compliant |
| 0 | ||
5-2176092-2 | TE Connectivity | SMD Chip Resistor, 2.55 kOhm, ? 0.1%, 250 mW, 0805 [2012 Metric], Thin Film, High Power Precision - Tape and Reel (Alt: 5-2176092-2) RoHS : Compliant |
| 0 | ||
| Z35092211300FHC000 | Vishay Intertechnologies | - Tape and Reel (Alt: Z35092211300FHC000) RoHS : Not Compliant |
| 0 | ||
| Z35092231309J6B000 | Vishay Intertechnologies | Resistor Flame Proof Wirewound 13 Ohm 5% 6W ?100ppm/?C to ?180ppm/?C Cement PC Pin T/R - Ammo Pack (Alt: Z35092231309J6B000) RoHS : Not Compliant |
| 0 | ||
 Arrow Electronics | 09222326824 | HARTING Technology Group | Conn DIN 41612 RCP 32 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 6,593 | |
| 09225VA-12Q-CA-00 | Minebea Co Ltd | DC Fan Axial Ball Bearing 12V 7V to 13.8V 96.4CFM 51dB 92 X 92 X 25mm RoHS : Compliant |
| 4,466 | ||
| 09225PB-B3L-EA-00 | Minebea Co Ltd | AC Axial Fans RoHS : Exempt |
| 790 | ||
| 0922-0-15-20-75-14-11-0 | Mill-Max Mfg Corp | Contact PIN Solder ST Thru-Hole Bulk RoHS : Exempt |
| 512 | ||
| 09225SE24QFTDW | NMB Technologies Corporation | DC Fan Axial Ball Bearing 24V 12V to 27.6V 65CFM 40dB 92 X 92 X 25mm RoHS : Compliant |
| 70 | ||
| 09225SA-12M-EA-D0 | NMB Technologies Corporation | 09225SA-12M-EA-D0 |
| 65 | ||
| 09225VE-12Q-CT-00 | NMB Technologies Corporation | 09225VE-12Q-CT-00 |
| 58 | ||
| 09222326824 | HARTING Technology Group | Conn DIN 41612 RCP 32 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 50 | ||
| 09222326825 | HARTING Technology Group | Conn DIN 41612 RCP 32 POS 2.54mm Solder ST Thru-Hole Box RoHS : Compliant |
| 21 | ||
| 09225PB-A1L-EA-00 | Minebea Co Ltd | AC Fan Axial Ball Bearing 115V 28.6CFM/35CFM 33.5dB/38dB 92.5 X 92.5 X 25mm |
| 5 | ||
| 09222326824 | HARTING Technology Group | Conn DIN 41612 RCP 32 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 4 | ||
 Newark | BBUP00201209221Y00 | Pulse Electronics Corporation | Ferrite Bead, 0.04Ohm, 3A, 0805; |Pulse Electronics BBUP00201209221Y00 RoHS : Compliant |
| 1,810 | |
| TSW-109-22-G-S | Samtec Inc | Header, 2.54Mm, Tht Vert, 9Way; |Samtec, Inc. TSW-109-22-G-S RoHS : Compliant |
| 888 | ||
| MTSW-109-22-T-S-275 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 9Pos; |Samtec, Inc. MTSW-109-22-T-S-275 RoHS : Compliant |
| 888 | ||
| MTSW-109-22-T-S-400 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 9Pos; |Samtec, Inc. MTSW-109-22-T-S-400 RoHS : Compliant |
| 888 | ||
| MTSW-109-22-T-S-405 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 9Pos; |Samtec, Inc. MTSW-109-22-T-S-405 RoHS : Compliant |
| 888 | ||
| MP009227 | SPC Multicomp | Cable Assy, 40P Idc Rcpt-Rcpt, 300Mm; |Multicomp Pro MP009227 RoHS : Compliant |
| 866 | ||
| MTSW-109-22-L-S-145 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 9Pos; |Samtec, Inc. MTSW-109-22-L-S-145 RoHS : Compliant |
| 669 | ||
| TSW-109-22-G-S-LA | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 9Pos; |Samtec, Inc. TSW-109-22-G-S-LA RoHS : Compliant |
| 619 | ||
| MTSW-109-22-L-D-440 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 18Pos; |Samtec, Inc. MTSW-109-22-L-D-440 RoHS : Compliant |
| 517 | ||
| MTSW-109-22-G-S-320-RA | Samtec Inc | Pin Header, Mtsw-109-22-G-S-320-Ra; |Samtec, Inc. MTSW-109-22-G-S-320-RA RoHS : Compliant |
| 506 | ||
| MTSW-109-22-G-S-325-RA | Samtec Inc | Pin Header, Mtsw-109-22-G-S-325-Ra; |Samtec, Inc. MTSW-109-22-G-S-325-RA RoHS : Compliant |
| 260 | ||
| HMTSW-109-22-T-S-310-RA | Samtec Inc | Pin Header, Hmtsw-109-22-T-S-310-Ra; |Samtec, Inc. HMTSW-109-22-T-S-310-RA RoHS : Compliant |
| 232 | ||
| MTSW-109-22-T-T-330-LA | Samtec Inc | Pin Header, Mtsw-109-22-T-T-330-La; |Samtec, Inc. MTSW-109-22-T-T-330-LA RoHS : Compliant |
| 111 | ||
| AIO-BDPCS-09-22 | Amphenol Industrial Operations | Blanking Plug, Dome, 9.2Mm, Black, Nyl; Plug Material:Nylon 6 (Polyamide 6); Thread Size:Pg7; External Diameter:9.2Mm; Product Range:Guardxcel Series |Amphenol Industrial AIO-BDPCS-09-22 RoHS : Not Compliant |
| 100 | ||
| 109220 | RUKO GmbH | Punch, Hole, Round, 22Mm; |Ruko 109220 RoHS : Not Compliant |
| 10 | ||
 RS | S-100-SP-8-G-S (101115-030-922) | Smiths Interconnect | PROBE, 0.100 (2.54), SP - CHISEL, SIZE 100, 3A, 25MILLIOHMS, 8OZ, S-100 SERIES |
| 555 | |
| ICT-L100-A-5.7-G (101349-000-922) | Smiths Interconnect | SPRING CONTACT PROBE CURRENT: 3 A 5.7OZ. RESISTANCE < 10 MO MAX .400" |
| 438 | ||
| 8092240 | RS Pro | UNINSULATED CRIMP RING TERMINAL 6.5MM STUD 16-14AWG COPPER CONTACT 16MM LENGTH |
| 400 | ||
| 609-2222-120F | Dialight | PANEL MOUNT INDICATOR, 9MM, GREEN 6V BLK HSG RoHS : Compliant |
| 136 | ||
| FAA1-09225QBHT31 | Qualtek Electronics Corporation | AC FAN, 230V, 92X92X25MM, 28/34CFM, 14.9/12.9W, 21.1/30.1DBA, TERMINALS RoHS : Compliant |
| 91 | ||
| 64.9209-22 | Stäubli Electrical Connectors | 4 MM TEST CLIP RED RoHS : Compliant |
| 40 | ||
| XM3B-0922-501 (XM3B0922501) | OMRON Electronic Components | D-SUB CONNECTOR, XM3B SERIES, SOCKET + R/A DIP TERM., 9 CONTACTS, 5A, 300VAC |
| 30 | ||
| 09222326824 | HARTING Technology Group | BACKPLANE CONNECTORS, WT 6.37 G, 32 CONTACTS, DIN 41612 SERIES RoHS : Compliant |
| 20 | ||
| 09222326825 | HARTING Technology Group | 32WAY 2.54MM PITCH TYPE 2B CLASS C2 2 ROW A/B STRAIGHT DIN 41612 CONN SKT SOLDER RoHS : Compliant |
| 19 | ||
| 12PAR30S/EXPERTCOLOR/F25/927/DIM/120V B (470922) | Philips Semiconductors | LED BULB, PAR30S, 12 WATTS, 2700 KELVIN, 800 LUMENS, 120 VOLTS |
| 12 | ||
| 2454269 (25530922) (HXLI20310450G-050RS) | RS Pro | 5/16 X 4 1/2 IN HEX HEAD LAG BOLT, GRADE A, GALVANIZED |
| 7 | ||
| 1370922 | RS Pro | 24MM SIZE 1/2 INCH DRIVE DEEP IMPACT SOCKET HEXAGON TYPE |
| 4 | ||
| AF09-22-00-14 | ABB Low Voltage Products and Systems | AF09 4 POLE CONTACTOR, 25 A, 4 KW, 250 - 500 V AC/DC COIL |
| 3 | ||
| 2451092 (25531464) (MPPFI-1001250-100RS) | RS Pro | SCREW, #10-32 X 1 1/4 PHILLIPS PAN MACHINE, ZINC PLATED |
| 2 | ||
| BI7-Q08-VN6X2-V1141 (1600922) | TURCK Inc | PROXIMITY SENSOR, 7MM SENSING DISTANCE, NO/NC, NPN, FLUSH MOUNT |
| 1 | ||
 Microchip Technology Inc | 131-62209-22-2 | Microchip Technology Inc | IC MEM NAND FLASH 2G 8-BIT TSOP-48 IND TEMP, Projected EOL: 2051-01-13 - Contact for Pricing | 0 | ||
| VXM7-9092-25M0000000 | Microchip Technology Inc | VXM7-9092-25M0000000, VDFN, Projected EOL: 2051-01-23 RoHS : Compliant |
| 0 | ||
| VXM7-9092-25M0000000TR | Microchip Technology Inc | VXM7-9092-25M0000000TR, VDFN, Projected EOL: 2051-01-23 RoHS : Compliant |
| 0 | ||
 Bisco Industries | 809-22-210-77-140000 | Mill-Max Mfg Corp | 755 | |||
| 1S07092-2.5-200HV-A2 | WASHERS | 340 | ||||
| AS3209-227 | AS O-RINGS | 214 | ||||
| 125-09-2.25 | Calmark | 79 | ||||
| 2092200 | NUTS | 45 | ||||
| HNBR 009 2269-90 | Parco | 30 | ||||
| MTSW-109-22-S-S-130-RA | Samtec Inc | RoHS : Compliant | 29 | |||
| AS3209-224 | AS O-RINGS | 20 | ||||
| AS3209-221 | AS O-RINGS | 20 | ||||
| P1909223K52THIN | MISC. INDUSTRIAL HRD | 20 | ||||
| 5309 229 | Altech Corporation | 10 | ||||
| NW165-09-2.25-N | Calmark | 10 | ||||
| 051-324-6709229 | ITT Interconnect Solutions | 6 | ||||
| 7100109223 | 3M Interconnect | 1 | ||||
| 051-328-6909229 | ITT Interconnect Solutions | 1 | ||||
 Onlinecomponents.com | 096516-0922 | ITT Interconnect Solutions | Conn D-Sub Micro-D Pin 25 Pos Metal 32-24 AWG Insulate Stranded Wire Hi-Temp MDM | ITT Cannon MDM-25PH006B-F222 |
| 49 | |
| 15266-0922 | Molex | 0.50mm Pitch Premo-Flex™ FFC Jumper, Opposite Side Contacts (Type D), 23 Circuits, 0.051m Cable Length, 0.27mm Cable Thickness, Tin (Sn) Plating RoHS : Compliant |
| 0 | ||
| 15020-0922 | Molex | 0.50mm Pitch Premo-Flex™ FFC Jumper, Opposite Side Contacts (Type D), 23 Circuits, 0.051m Cable Length, 0.27mm Cable Thickness, Gold (Au) Plating RoHS : Compliant |
| 0 | ||
| 121575-0922 | ITT Interconnect Solutions | Conn MIL-C-5015 Circular SKT 2 POS Crimp ST Cable Mount 2 Terminal 1 Port |
| 0 | ||
| 096517-0922 | ITT Interconnect Solutions | MDM-25SCBRTL61 |
| 0 | ||
| 98266-0922 | Molex | 0.50mm Pitch Premo-Flex™ FFC Jumper, Opposite Side Contacts (Type D), 23 Circuits 0.051m Cable Length, 0.22mm Cable Thickness, Tin(Sn) Plating RoHS : Compliant |
| 0 | ||
| 15166-0922 | Molex | 0.50mm Pitch Premo-Flex FFC Jumper, Opposite Side Contacts (Type D), 51.00mm Cable Length, Tin (Sn) Plating, 23 Circuits RoHS : Compliant |
| 0 | ||
| 096511-0922 | ITT Interconnect Solutions | Conn Micro-d Rcpt 9POS R/a |
| 0 | ||
| 096512-0922 | ITT Interconnect Solutions | MDME-15PCBRM7-F-1-A174; Micros; Micro |
| 0 | ||
| 155851-0922 | ITT Interconnect Solutions | Connector Miniature Circular Socket 4 Position Crimp Straight Cable Mount 4 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 096513-0922 | ITT Interconnect Solutions | Cable Assembly 26AWG 0.127m 15 Position Micro D Subminiature Receptacle RoHS : Compliant |
| 0 | ||
| 132039-0922 | ITT Interconnect Solutions | Circular Plastic Push Pull Straight Plug w/Cable Gray 10 Pin 3 A PLA Series | ITT Cannon PLA1G523H10 RoHS : Compliant |
| 0 | ||
| 053516-0922 | ITT Interconnect Solutions | DEMZ-5H1P-N-K127; D Sub; D Sub RoHS : Compliant |
| 0 | ||
| 121007-0922 | ITT Interconnect Solutions | Circular Connector - 90° Plug - Contact Arrangement: 20-7 - Sockets - Threaded Coupling - Endbell No cable clamp |
| 0 | ||
| 121003-0922 | ITT Interconnect Solutions | Connector Cap (Cover) For MIL-DTL-5015 Receptacle - Shell Size 12S - Aluminum Alloy - With Cord - Cadmium Plating. RoHS : Compliant |
| 0 | ||
 Rochester Electronics | CY90922NCSPMC-GS-274E1 | Infineon Technologies AG | CY90922NCSPMC - 16-bit Microcontrollers - MCU |
| 186 | |
| MB90922NCSPMC-GS-266E1 | Infineon Technologies AG | MB90922NCSPMC-GS-266E1 - 16-bit Microcontrollers - MCU |
| 526 | ||
| CY90922NCSPMC-GS-219E1 | Infineon Technologies AG | CY90922NCSPMC-GS-219E1 - 16-bit Microcontrollers - MCU |
| 695 | ||
| CY90922NCSPMC-GS-266E1 | Infineon Technologies AG | CY90922NCSPMC - 16bit Legacy MCU RoHS : Compliant |
| 701 | ||
| CY90922NCSPMC-GS-273E1 | Infineon Technologies AG | CY90922NCSPMC - 16-bit Microcontrollers - MCU |
| 190 | ||
| CY90922NCSPMC-GS-216E1 | Infineon Technologies AG | 16bit Legacy MCU |
| 933 | ||
| CY90922NCPMC-GS-165E1 | Infineon Technologies AG | IC MCU F²MC-16LX 16Bit 1 Core Mask ROM 256kB (256k x 8) 32MHz 120-QFP RoHS : Not Compliant |
| 1,310 | ||
| CY90922NCSPMC-GS-237E1 | Infineon Technologies AG | IC MCU F²MC-16LX 16Bit 1 Core Mask ROM 256kB (256k x 8) 32MHz 120-QFP RoHS : Not Compliant |
| 612 | ||
| MB90922NCPMC-GS-165E1 | Infineon Technologies AG | IC MCU 120-QFP Tray RoHS : Compliant |
| 372 | ||
 Sager | MTSW-109-22-L-S-145 | Samtec Inc | Headers & Wire Housings Variable Height PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 669 | |
| MMSD-09-22C-L-20.60-D-K-LDX | Samtec Inc | Rectangular Cable Assemblies Mini-Mate Cable Assembly, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| MMTS-09-22C-S-06.00-D-TDS | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| RCV-00009228 | Carling Technologies | Rocker Switches VVAAB40-100 | 0 | |||
| MTSW-109-22-G-D-310 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-109-22-L-D-375 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 09225SA-12L-AA-D0 | NMB Technologies Corporation | DC Fans DC Axial Fan, 92x92x25mm, 12VDC, 40.6CFM, Rib Mount, Ball Bearing, Lead Wires RoHS : Compliant |
| 0 | ||
| 09225SA-24N-AT-D0 | NMB Technologies Corporation | DC Fans DC Axial Fan, 92x92x25mm, 24VDC, 54.7CFM, Rib Mount, Ball, 3-Lead Wires, Tach |
| 0 | ||
| 09225SS-24L-EL-D0 | NMB Technologies Corporation | DC Fans DC Tubeaxial Fan, 92x92x25mm, 24VDC, 39.9CFM, Flange, Sleeve, Lock Sensor |
| 0 | ||
| 09225VA-12L-ET-00 | NMB Technologies Corporation | DC Fans DC Axial Fan, 92x92x25mm, 12VDC, 61.1CFM, Flange Mount, 3-Lead Wires, Tachometer |
| 0 | ||
| 09225VA-12N-AT-D0 | NMB Technologies Corporation | DC Fans | 0 | |||
| 09225VA-12P-EL-00 | NMB Technologies Corporation | DC Fans DC Axial Fan, 92x92x25mm, 12VDC, 85.8CFM, Flange Mount, 3-Wire, Lock Sensor |
| 0 | ||
| 09225VA-12Q-EA-D0 | NMB Technologies Corporation | DC Fans | 0 | |||
| 09225VA-24L-EA-D0 | NMB Technologies Corporation | DC Fans | 0 | |||
| 09225VA-24N-CA-00 | NMB Technologies Corporation | DC Fans DC Axial Fan, 92x92x25mm, 24VDC, 76.99CFM, Rib Mount, Ball, Lead Wires, IP69K RoHS : Compliant |
| 0 | ||
 ComSIT USA | WK80922001003J5C00 | Vishay Intertechnologies | Fixed Resistor, Metal Oxide Film, 4W, 100000ohm, 750V, 5% +/-Tol, 200ppm/Cel, Through Hole Mount RoHS : Compliant | 32,000 | ||
| WK80922001001J5C00 | Vishay Intertechnologies | Fixed Resistor, Metal Oxide Film, 4W, 1000ohm, 750V, 5% +/-Tol, 200ppm/Cel, Through Hole Mount RoHS : Compliant | 4,000 | |||
| PD0922J7575D2HF | Anaren Microwave | 75 OHMS TO 75 OHMS ULTRA LOW PROFILE 0805 POWER DIVIDER Splitter RoHS : Not Compliant | 3,315 | |||
| WK80922002702J5C00 | Vishay Intertechnologies | Fixed Resistor, Metal Oxide Film, 4W, 27000ohm, 750V, 5% +/-Tol, 200ppm/Cel, Through Hole Mount RoHS : Compliant | 1,500 | |||
| 1270922 | Schurter Electronic Components | SURFACE MOUNT FUSE Electric Fuse, Time Lag Blow, 3.15A, 250VAC, 300VDC, 1500A (IR), Inline/holder, 5x20mm RoHS : Compliant | 1,078 | |||
| 7447709220 | Adolf Wuerth Gmbh & Co Kg | WE-PD SMT SHIELDED POWER INDUCTOR General Purpose Inductor, 22uH, 20%, 1 Element, Nickel-zinc-Core, SMD, 4747 RoHS : Compliant | 943 | |||
| S80922CLMCG6ST2G | sii | Voltage Detector, Fixed, 1 Channel, +2.2V, CMOS, PDSO5 RoHS : Compliant | 425 | |||
 Interstate Connecting Components | 39050630922001 | Amphenol PCD | TERRAPIN | 0 | ||
| 10136656-0922LF | Amphenol FCi | 10136656-0922LF-MINITEK PWR3.0 RoHS : Compliant | 0 | |||
| 10209221-00 | TE Connectivity | FN3030-S115-500N | 0 | |||
| 801-009-22C10-202PD | Glenair Inc | 0 | ||||
| 801-009-22C10-26AC | Glenair Inc | 0 | ||||
| 801-009-22C10-5SB | Glenair Inc | 0 | ||||
| 801-009-22C13-201BD | Glenair Inc | 0 | ||||
| 801-009-22C13-3PD | Glenair Inc | 0 | ||||
| 801-009-22C16-12BA | Glenair Inc | 0 | ||||
| 801-009-22C16-55BD | Glenair Inc | 0 | ||||
| 801-009-22C16-5BC | Glenair Inc | 0 | ||||
| 801-009-22C17-14SA | Glenair Inc | 0 | ||||
| 801-009-22C17-85SC | Glenair Inc | 0 | ||||
| 801-009-22C5-3AB | Glenair Inc | 0 | ||||
| 801-009-22C6-1AC | Glenair Inc | 0 | ||||
 PEI Genesis | C09-224JAPKG | Daniels Manufacturing Corporation (DMC) |
| 0 | ||
| S4092-2448-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4092-2620-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/109-22KZ09-6 | Amphenol PCD |
| 0 | |||
| M85049/109-22KN10-6D | Amphenol PCD |
| 0 | |||
| M85049/109-22KW11-6D | Amphenol PCD |
| 0 | |||
| S4092-2432-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4092-2920-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| C10-597109-221 | Amphenol Corporation |
| 0 | |||
| C8820-9-22 | SOURIAU-SUNBANK |
| 0 | |||
| 609-2212-130F | Dialight | RoHS : Compliant |
| 0 | ||
| 1217092-202 | SOURIAU-SUNBANK |
| 0 | |||
| 10-597109-2231 | Amphenol Corporation |
| 0 | |||
| 609-2222-120F | Dialight | RoHS : Compliant |
| 0 | ||
| 552-0922F | Dialight | RoHS : Compliant |
| 0 | ||
 Powell Electronics | TSW-109-22-T-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 1,191 | |
| TSW-109-22-G-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 586 | ||
| MTSW-109-22-T-S-275 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 586 | ||
| MTSW-109-22-T-S-400 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 586 | ||
| MTSW-109-22-T-S-405 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 586 | ||
| MTSW-109-22-L-S-145 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 442 | ||
| TSW-109-22-G-S-LA | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 409 | ||
| MTSW-109-22-L-D-440 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 341 | ||
| MTSW-109-22-G-S-320-RA | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 334 | ||
| MTSW-109-22-L-S-295-RA | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 334 | ||
| MTSW-109-22-G-S-325-RA | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 172 | ||
| HMTSW-109-22-L-S-120-RA | Samtec Inc | .100" High-Temp Variable Post Height Ter RoHS : Compliant |
| 169 | ||
| HMTSW-109-22-T-S-310-RA | Samtec Inc | .100" High-Temp Variable Post Height Ter RoHS : Compliant |
| 153 | ||
| MTSW-109-22-T-T-330-LA | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 73 | ||
| RM322-092-212-5500 | AirBorn a molex company | RM322-092-212-5500 |
| 20 | ||
 Richardson RFPD | PD0922J7575D2HF | TTM Technologies | N-WAY DIVIDER/COMBIN RoHS : Compliant |
| 4 | |
| SI5338A-B09225-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| SI5395A-A09227-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| BD0922J75100AHF | TTM Technologies | RF Transformer 1:1.15 6 Terminal SMD RoHS : Compliant |
| 0 | ||
| SI5335A-B09228-GM | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 350MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| B0922J7575A50HF | TTM Technologies | RF Transformer 1:1 6 Terminal SMD RoHS : Compliant |
| 0 | ||
| BD0922J75100A00 | TTM Technologies | BALUN TRANSFORMER RoHS : Compliant | 0 | |||
| SI5338A-B09224-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| B0922N7575AHF | TTM Technologies | RF Transformer 1:1 4 Terminal SMD RoHS : Compliant |
| 0 | ||
| SI5332BD09229-GM3 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 48-P RoHS : Compliant | 0 | |||
| SI5344B-D09226-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 4 RoHS : Compliant | 0 | |||
| DC0922512V2B-BT0 | Wakefield-Vette | FAN RoHS : Compliant |
| 0 | ||
| SI5386A-E09222-GMR | Skyworks Solutions Inc | SI5386A-E09222-GMR RoHS : Compliant | 0 | |||
| SI5338B-B10922-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 350MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| DC0922512V2B-2T0 | Wakefield-Vette | FAN RoHS : Compliant |
| 0 | ||
 Rutronik | BBBK00201209222Y00 | Pulse Electronics Corporation | BBBK00201209 2200R 200mA 0,7R RoHS : Compliant |
| 36,000 | |
| VN30.10/10922-1 | Marschner | EI30/10,5/2ST 230V/9V-1,5VA RoHS : Compliant |
| 10,591 | ||
| WK80922002702J5C00 | Vishay Intertechnologies | WK8 27K 5% 4W TK200 RoHS : Compliant |
| 9,500 | ||
| THF 409 220 2 | Fischer Elektronik GmbH & Co KG | TRANSISTOR RETAINING SPRING RoHS : Compliant |
| 7,300 | ||
| WK80922006809J5C00 | Vishay Intertechnologies | WK8 68R 5% 4W TK200 RoHS : Compliant |
| 500 | ||
 Chip 1 Exchange | 160922-2 | TE Connectivity | INSTOCK RoHS : Compliant | 540,611 | ||
| 214092-2060 | Molex | INSTOCK | 276,374 | |||
| 214092-2040 | Molex | INSTOCK | 243,215 | |||
| 90814-0922 | Molex | INSTOCK RoHS : Compliant | 7,800 | |||
| 74320-9224 | Molex | INSTOCK | 5,817 | |||
| LCA0922-15R-2%AB | INSTOCK | 4,000 | ||||
| SRI1209-220M | INSTOCK | 2,615 | ||||
| ABUP00201209221Y00 | YAGEO Corporation | INSTOCK RoHS : Compliant | 2,000 | |||
| A09-222JP | FENG | INSTOCK | 1,495 | |||
| SXA0922-15-OHM | INSTOCK | 750 | ||||
| R109-221 | INSTOCK | 400 | ||||
| LCA09221K05%AB | INSTOCK | 400 | ||||
| LCA0922470R5%AB | INSTOCK | 200 | ||||
| 3-092288 | KSG | INSTOCK | 30 | |||
| 3-109-228 | Schurter Electronic Components | INSTOCK RoHS : Compliant | 15 | |||
 Avnet Abacus | BBUP00201209221Y00 | Pulse Electronics Corporation | Ferrite Bead 0805 2012 Metric 220 ohm 3 A BBUP Series 004 ohm 25 - Tape and Reel (Alt: BBUP00201209221Y00) RoHS : Compliant | 100,000 | ||
| 3402.0009.22 | Schurter Electronic Components | - Tape and Reel (Alt: 3402.0009.22) RoHS : Compliant | 1,500 | |||
| 1909223 | Phoenix Contact | FKCT 25 3ST FKCT253ST (Alt: 1909223) RoHS : Compliant | 300 | |||
| 35092244 | Aptiv PLC | Automotive Connector Housing SHIELDPACK HV RCS890 SB RV Series Receptacle 2 Ways (Alt: 35092244) RoHS : Compliant | 54 | |||
| 35092239 | Aptiv PLC | Conn Power PL 2 POS RA Cable Mount 2 Terminal Single Port (Alt: 35092239) RoHS : Compliant | 54 | |||
| MK-223-009-225-2200 | Molex | AirBorn M Series MicroD Board Mount Receptacle 0050 127mm Pitch Vertical Through Hole (Alt: MK-223-009-225-2200) RoHS : Not Compliant | 5 | |||
| MK-222-009-225-2200 | Molex | AirBorn M Series MicroD Board Mount Receptacle 0050 127mm Pitch Vertical Through Hole (Alt: MK-222-009-225-2200) RoHS : Not Compliant | 5 | |||
| MK-242-009-225-2200 | Molex | AirBorn M Series MicroD Board Mount Receptacle 0050 127mm Pitch Vertical Through Hole (Alt: MK-242-009-225-2200) RoHS : Not Compliant | 5 | |||
| NK-2D2-009-225-TH00 | Molex | AirBorn N Series NanoD Board Mount Receptacle 0025 0635mm Pitch RightAngle Surface Mount - Tape and Reel (Alt: NK-2D2-009-225-TH00) RoHS : Not Compliant | 5 | |||
| 1710922 | Phoenix Contact | FMC 15 6ST35 BD61 FMC156ST35BD61 (Alt: 1710922) RoHS : Compliant | 0 | |||
| 140922-1 | TE Connectivity | Quick Disconnect Terminal F 194mm (Alt: 140922-1) RoHS : Not Compliant | 0 | |||
| 86092257LF | Amphenol Corporation | Connector Accessories Shroud (Alt: 86092257LF) RoHS : Compliant | 0 | |||
| WK80922004701J5C00 | Vishay Intertechnologies | WK8 4K7 5 AC - Tape and Reel (Alt: WK80922004701J5C00) RoHS : Compliant | 0 | |||
| WK80922002201J5C00 | Vishay Intertechnologies | WK8 2K2 5 AC - Tape and Reel (Alt: WK80922002201J5C00) RoHS : Compliant | 0 | |||
| WK80922003909J5C00 | Vishay Intertechnologies | - Tape and Reel (Alt: WK80922003909J5C00) RoHS : Compliant | 0 | |||
Avnet Asia | BBUP00201209220Y00 | Pulse Electronics Corporation | (Alt: BBUP00201209220Y00) RoHS : Compliant | 0 | ||
| APA0609221M016R | Kyocera AVX Components | (Alt: APA0609221M016R) RoHS : Compliant | 0 | |||
| 3413.0009.22 | Schurter Electronic Components | (Alt: 3413.0009.22) RoHS : Compliant | 0 | |||
| PD0922J5050S2HF | TTM Technologies | (Alt: PD0922J5050S2HF) RoHS : Compliant | 0 | |||
| PD0922J5050D2HF | TTM Technologies | (Alt: PD0922J5050D2HF) RoHS : Compliant | 0 | |||
| Z35092238209J6BC10 | Vishay Intertechnologies | Resistor, 82 Ohm, ? 5%, 6 W, Axial Leaded, Wirewound, High Surge (Alt: Z35092238209J6BC10) RoHS : Compliant | 0 | |||
| 2400922-3 | TE Connectivity | STEEL,INNER FERRULE,PCON18,180,70SQMM (Alt: 2400922-3) RoHS : Compliant | 0 | |||
| 5650922-5 | TE Connectivity | (Alt: 5650922-5) RoHS : Compliant | 0 | |||
| 1731092261 | Molex | (Alt: 1731092261) RoHS : Compliant | 0 | |||
 Avnet Silica | C10922_GT4-M | LEDIL | GT4 LENS WITH TRANSPARENT COLOR (Alt: C10922_GT4-M) RoHS : Compliant | 0 | ||
| 5962R0922503VYC | Renesas Electronics Corporation | (Alt: ISL70001ASEHVFE) RoHS : Compliant | 0 | |||
| 5962R0922502VXC | Renesas Electronics Corporation | CQFP 48MRadiation Hardened and SEE Hardened 6A Synchronous Buck Regulator ISL70001SEHVF (Alt: ISL70001SEHVF) RoHS : Compliant | 0 | |||
| 5962R0922501VXC | Renesas Electronics Corporation | (Alt: ISL70001SRHVF) RoHS : Compliant | 0 | |||
| 5962R0922501QXC | Renesas Electronics Corporation | (Alt: 5962R0922501QXC) RoHS : Compliant | 0 | |||
| 5962R0922503VXC | Renesas Electronics Corporation | (Alt: ISL70001ASEHVF) RoHS : Compliant | 0 | |||
| 5962R0922502VYC | Renesas Electronics Corporation | (Alt: ISL70001SEHVFE) RoHS : Compliant | 0 | |||
| 5962R0922502VYCS2793 | Renesas Electronics Corporation | RADIATION HARDENED SYNCHRONOUS BUCK REGULATOR CLS V EPFP HDRLDR (Alt: ISL70001SEHVFES2793) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AIUR-09-221K | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AIUR-09-220M | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | 2222-679-09228 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 9,153 | |
| DF0922512RFMN | Cooler Master Technology Inc | IN STOCK SHIP TODAY |
| 850 | ||
| SSW-109-22-G-S-VS-P | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 432 | ||
| P2-09-2204-N | Bivar Inc | IN STOCK SHIP TODAY | 200 | |||
| 12092231 | Aptiv PLC | IN STOCK SHIP TODAY |
| 143 | ||
| 09-22-132-6824.01 | HARTING Technology Group | IN STOCK SHIP TODAY | 75 | |||
| 609-2222-140 | Dialight | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 50 | ||
| MTSW-109-22-G-D-440 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 47 | ||
| 1825092-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 34 | ||
| C09-224 | DMC Co Ltd | IN STOCK SHIP TODAY |
| 30 | ||
| 09-22-132-6921.00 | HARTING Technology Group | IN STOCK SHIP TODAY |
| 20 | ||
| 09-22-132-6825.01 | HARTING Technology Group | IN STOCK SHIP TODAY | 20 | |||
| 650092-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 10 | ||
| 552-0922F | Dialight | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
| 627-009-220-017 | EDAC Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 4 | ||
 DB Roberts | 09223-01350 | Avdel | INSERTO NUT ACC.INOX M5UKO50 | 0 | ||
| 710922 | PennEngineering (PEM) | 0 | ||||
| 490922 | Essentra Components | 0 | ||||
| 09225DZ1335 | Avdel | INSERTO M8 UKO 35 ACC.INOX Z | 0 | |||
| 12SWS0922 | Essentra Components | SHOULDER WASHER, .140 ID, .450 | 0 | |||
| 1092280000VR | Essentra Components | 0 | ||||
| 09223-02330 | Avdel | INSERTO NUT ACC.INOX M5UKX30 | 0 | |||
| 09223DZ1130 | Avdel | INSERTO M5 UPO 30 ACC.INOX ZI | 0 | |||
| 550922 | Essentra Components | 0 | ||||
| 1092270000VR | Essentra Components | 0 | ||||
| 07900-00922 | Avdel | 2.0MM ALLEN KEY | 0 | |||
| 6092-2TFBM400 | Dodge | 1/8-27NPT | 0 | |||
| 09224DZ1330 | Avdel | INSERTO M6 UKO 30 ACC.INOX ZI | 0 | |||
| 74290-09221 | Avdel | 74290 INS TL - SPARE PRT M5 | 0 | |||
| 09225DZ1135 | Avdel | INSERTO M8 UPO 35 ACC.INOX Z | 0 | |||
 EBV Elektronik | C10922_GT4-M | LEDIL | GT4 LENS WITH TRANSPARENT COLOR (Alt: C10922_GT4-M) RoHS : Compliant | 0 | ||
| CM8071505092202S RMBU | Intel Corporation | Processor Intel Core i313100 CISC 64Bit 45GHz 1700Pin FCLGA Tray (Alt: 99C50V) RoHS : Compliant | 0 | |||
| CM8071505092206S RMX1 | Intel Corporation | Intel Core i3 processor 14100 12M Cache up to 470 GHz FCLGA16A Tray (Alt: 99CC87) RoHS : Compliant | 0 | |||
| CM8071505092207S RMX2 | Intel Corporation | (Alt: 99CC88) RoHS : Compliant | 0 | |||
 Maritex | 09225SA-12N-EA-D0 | NMB Technologies Corporation | Fan; DC; 12VDC; 92x92x25mm; 1.45m3/min; 32.0dB. |
| 1,069 | |
| ULO-PH409-2*2SF11 | ULO | Pin Header; pitch 2.54mm; 2x2 pins; assembly: THT; male; straight; double row |
| 552 | ||
| 1-2310922-1 | TE Connectivity | Rectangular Connector Housings; 1-2310922-1; TE CONNECTIVITY; 2 RoHS : Compliant |
| 71 | ||
| 1-2310922-2 | TE Connectivity | Rectangular Connector Housings; 1-2310922-2; TE CONNECTIVITY; 2; 1 RoHS : Compliant |
| 8 | ||
 Master Electronics | MMSD-09-22-L-03.25-D-K-LDS | Samtec Inc | RoHS : Compliant |
| 0 | |
| MMSD-09-22-S-03.25-D-K-LUS | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSD-09-22C-L-06.00-D-K-LD | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMTS-09-22C-S-06.00-D-TDS | Samtec Inc | .100 Mini Mate® Single Row Discrete Wire Cable Assembly Terminal RoHS : Compliant |
| 0 | ||
| RCV-00109227 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| MTSW-109-22-G-D-310 | Samtec Inc | Conn Unshrouded HDR 18 POS 2.54mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| MTSW-109-22-G-D-428 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-109-22-L-D-375 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-109-22-L-S-145 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-109-22-L-T-478 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| APH-0922-G-T | Samtec Inc | LOW PROFILE ADAPTOR RoHS : Compliant |
| 0 | ||
| HTSW-109-22-G-S-LL | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-209-22-G-Q-LA | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| HMTSW-109-22-G-T-440 | Samtec Inc | Conn Unshrouded Header HDR 27 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| HMTSW-109-22-L-Q-200 | Samtec Inc | Conn Unshrouded Header HDR 18 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3W10922 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. Fire Rated 2.2-5 Male to N Male Low PIM Cable Using SPF-250 Coax., Radio frequency assembly fire rated 2.2-5 male to N male low PIM cable using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 2.2-5 male to N male low PIM cable using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a type N cable connection on the other. Our low PIM 2.2-5 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W10922 can also be known as a low PIM 2.2-5 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3W10922 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has a between series connection. Our 2.2-5 male to type N male cable has a maximum VSWR of 1.4:1. 2.2-5 plug to type N plug cable assembly PE3W10922 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W10922 can also be used in the other direction and will be a type N male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to type N cable assembly for quick shipment worldwide. Variations of 2.2-5 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to type N low PIM RF cable assembly as per your requirements. | 2,237 | ||
| PE3W00922 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to BNC Female Bulkhead Cable Using RG188-DS Coax., Radio frequency assembly BNC male right angle to BNC female bulkhead cable using RG188-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male right angle to BNC female bulkhead cable using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and BNC bulkhead cable connection on the other. Our right angle BNC to BNC cable assembly has male gender on end 1 and female on end 2. PE3W00922 can also be known as a right angle BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. BNC plug to BNC jack cable assembly PE3W00922 is built with RG188-DS which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W00922 RF cable are available on our downloadable PDF datasheet.PE3W00922 can also be used in the other direction and will be BNC female bulkhead to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements. | 1,883 | |||
| PE3W10922-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated 2.2-5 Male to N Male Low PIM Cable 12 Inch Length Using SPF-250 Coax., Radio frequency assembly fire rated 2.2-5 male to N male low PIM cable 12 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 2.2-5 male to N male low PIM cable 12 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a type N cable connection on the other. Our low PIM 2.2-5 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W10922-12 can also be known as a low PIM 2.2-5 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3W10922-12 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has a between series connection. Our 2.2-5 male to type N male cable has a maximum VSWR of 1.4:1. 2.2-5 plug to type N plug cable assembly PE3W10922-12 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W10922-12 can also be used in the other direction and will be a type N male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to type N cable assembly for quick shipment worldwide. Variations of 2.2-5 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to type N low PIM RF cable assembly as per your requirements. |
| 847 | ||
| PE3W10922-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. Fire Rated 2.2-5 Male to N Male Low PIM Cable 50 CM Length Using SPF-250 Coax., Radio frequency assembly fire rated 2.2-5 male to N male low PIM cable 50 cm length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 2.2-5 male to N male low PIM cable 50 cm length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a type N cable connection on the other. Our low PIM 2.2-5 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W10922-50CM can also be known as a low PIM 2.2-5 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3W10922-50CM RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has a between series connection. Our 2.2-5 male to type N male cable has a maximum VSWR of 1.4:1. 2.2-5 plug to type N plug cable assembly PE3W10922-50CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W10922-50CM can also be used in the other direction and will be a type N male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to type N cable assembly for quick shipment worldwide. Variations of 2.2-5 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to type N low PIM RF cable assembly as per your requirements. |
| 516 | ||
| PE3W10922-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated 2.2-5 Male to N Male Low PIM Cable 24 Inch Length Using SPF-250 Coax., Radio frequency assembly fire rated 2.2-5 male to N male low PIM cable 24 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 2.2-5 male to N male low PIM cable 24 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a type N cable connection on the other. Our low PIM 2.2-5 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W10922-24 can also be known as a low PIM 2.2-5 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3W10922-24 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has a between series connection. Our 2.2-5 male to type N male cable has a maximum VSWR of 1.4:1. 2.2-5 plug to type N plug cable assembly PE3W10922-24 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W10922-24 can also be used in the other direction and will be a type N male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to type N cable assembly for quick shipment worldwide. Variations of 2.2-5 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to type N low PIM RF cable assembly as per your requirements. |
| 423 | ||
| PE3W00922-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male Right Angle to BNC Female Bulkhead Cable 48 Inch Length Using RG188-DS Coax., Radio frequency assembly BNC male right angle to BNC female bulkhead cable 48 inch length using RG188-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male right angle to BNC female bulkhead cable 48 inch length using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and BNC bulkhead cable connection on the other. Our right angle BNC to BNC cable assembly has male gender on end 1 and female on end 2. PE3W00922-48 can also be known as a right angle BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. BNC plug to BNC jack cable assembly PE3W00922-48 is built with RG188-DS which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W00922-48 RF cable are available on our downloadable PDF datasheet.PE3W00922-48 can also be used in the other direction and will be BNC female bulkhead to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements. |
| 338 | ||
| PE3W10922-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated 2.2-5 Male to N Male Low PIM Cable 60 Inch Length Using SPF-250 Coax., Radio frequency assembly fire rated 2.2-5 male to N male low PIM cable 60 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 2.2-5 male to N male low PIM cable 60 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a type N cable connection on the other. Our low PIM 2.2-5 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W10922-60 can also be known as a low PIM 2.2-5 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3W10922-60 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has a between series connection. Our 2.2-5 male to type N male cable has a maximum VSWR of 1.4:1. 2.2-5 plug to type N plug cable assembly PE3W10922-60 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W10922-60 can also be used in the other direction and will be a type N male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to type N cable assembly for quick shipment worldwide. Variations of 2.2-5 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to type N low PIM RF cable assembly as per your requirements. |
| 169 | ||
| PE3W09227 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using LMR-195 Coax. PE3W09227 is a SMA male to SMA male cable using LMR-195 coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09227 SMA male to SMA male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE7092-20 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 20 dB, Connector Series 1: SMA, Connector Gender 1: Male, Connector Series 2: SMA, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 20 dB Fixed Attenuator, SMA Male to SMA Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7092-20 is a fixed 20 dB attenuator from Pasternack. This 20dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. The Pasternack PE7092-20 20 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7092-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. RoHS : Compliant |
| 0 | ||
| PE3W09225LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to Reverse Polarity SMA Female Bulkhead Cable Using RG188 Coax with HeatShrink, LF Solder. PE3W09225LF/HS is a reverse polarity SMA female to reverse polarity SMA female bulkhead cable using RG188 coax. This Pasternack reverse polarity SMA female to reverse polarity SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity female SMA to reverse polarity female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09225LF/HS SMA reverse polarity female to SMA reverse polarity female bulkhead cable assembly is constructed with RG188 coax. | 0 | |||
| PE3W09222LF | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to 2.92mm Male Cable Using Tinned RG405 Coax, LF Solder. PE3W09222LF is a Mini SMP female right angle to 2.92mm male cable using RG405 Tinned coax. This Pasternack Mini SMP female right angle to 2.92mm male cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm 2.92mm for connector 2. Mini SMP right angle to 2.92mm coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP right angle to male 2.92mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W09222LF Mini SMP female right angle to 2.92mm male cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3W09226 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. Mini SMP Female to 2.92mm Male Cable Using Tinned RG405 Coax. PE3W09226 is a Mini SMP female to 2.92mm male cable using RG405 Tinned coax. This Pasternack Mini SMP female to 2.92mm male cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm 2.92mm for connector 2. Our female Mini SMP to male 2.92mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W09226 Mini SMP female to 2.92mm male cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3W00922LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to BNC Female Bulkhead Cable Using RG188-DS Coax, LF Solder. PE3W00922LF is a BNC male right angle to BNC female bulkhead cable using RG188-DS coax. This Pasternack BNC male right angle to BNC female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00922LF BNC male right angle to BNC female bulkhead cable assembly is constructed with RG188-DS coax. | 0 | |||
| PE3C0922 | Pasternack Enterprises | 0 | ||||
| PE3W09229 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to SMA Male Right Angle Cable Using LMR-240-UF Coax. PE3W09229 is a BNC male right angle to SMA male right angle cable using LMR-240-UF coax. This Pasternack BNC male right angle to SMA male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. BNC right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09229 BNC male right angle to SMA male right angle cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
 Vyrian | 90121-0922 | Molex | Board Connector, 2 Contact(s), 1 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle RoHS : Compliant | 12,610 | ||
| 2809225 | Phoenix Contact | Terminal Block Accessory, Jumper Item RoHS : Compliant | 12,431 | |||
| XM3C-0922-112 | OMRON Corporation | D Subminiature Connector, 9 Contact(s), Male, 0.108 inch Pitch, Solder Terminal, Plug RoHS : Compliant | 10,821 | |||
| V092-2113 | Broadcom Limited | 9,657 | ||||
| PTFA092201EV1 | Infineon Technologies AG | 9,455 | ||||
| 5962R0922701VXA | Analog Devices Inc | Modulator, I/Q, 800MHz Min, 2500MHz Max RoHS : Not Compliant | 8,009 | |||
| XM3B-0922-132 | OMRON Corporation | D Subminiature Connector, 9 Contact(s), Female, Solder Terminal, Socket RoHS : Compliant | 7,750 | |||
| 2M801-009-22MT13-37SA | Amphenol Aerospace Operations | 7,641 | ||||
| DS90922R-L00 | Analog Devices Inc | Memory Circuit, CMOS, MBCY2 RoHS : Not Compliant | 7,026 | |||
| 5650922-5 | TE Connectivity | Board Euro Connector, 150 Contact(s), 3 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Gray Insulator, Plug RoHS : Compliant | 6,989 | |||
| 5000922 | Micron Technology, Inc | 6,586 | ||||
| 1809225 | Phoenix Contact | Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,046 | |||
| WK80922001000JG100 | Vishay Intertechnologies | Fixed Resistor, Metal Oxide Film, 4W, 100ohm, 750V, 5% +/-Tol, 200ppm/Cel, Through Hole Mount RoHS : Compliant | 744 | |||
| 49.7092-29 | Staeubli Electrical Connectors Ag | Interconnection Device | 432 | |||
| Z35092235109JHC000 | Vishay Intertechnologies | Fixed Resistor, Wire Wound, 6W, 51ohm, 5% +/-Tol, 100,180ppm/Cel, Through Hole Mount RoHS : Compliant | 354 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand