| Electronic Components Datasheet Search |
|
060L-P16-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | FSV2060L | onsemi | - Tape and Reel (Alt: FSV2060L) RoHS : Compliant |
| 15,000 | |
| LSHM-150-06.0-L-DV-A-S-K-TR | Samtec Inc | - Tape and Reel (Alt: LSHM-150-06.0-L-DV-A-S-K-TR) RoHS : Compliant |
| 2,475 | ||
| HCPL-060L-060E | Broadcom Limited | Optocoupler, Digital Output, 1 Channel, 3.75 kV, 15 Mbaud, SOIC, 8 Pins - Rail/Tube (Alt: HCPL-060L-060E) RoHS : Compliant |
| 1,002 | ||
| LSHM-120-06.0-L-DV-A-S-K-TR | Samtec Inc | - Tape and Reel (Alt: LSHM-120-06.0-L-DV-A-S-K-TR) RoHS : Compliant |
| 375 | ||
| HCPL-060L | Broadcom Limited | - Rail/Tube (Alt: HCPL-060L) RoHS : Not Compliant |
| 304 | ||
| ST370-60L2MI | Vishay Intertechnologies | - Bulk (Alt: ST370-60L2MI) RoHS : Not Compliant |
| 14 | ||
| M39016/12-060L | Teledyne Relays | - Bulk (Alt: PT01P-10-6P(433)) RoHS : Compliant | 2 | |||
| NFCS1060L3TT | onsemi | Intelligent Power Module (IPM), PFC Combo, 600V, 10A - Rail/Tube (Alt: NFCS1060L3TT) RoHS : Not Compliant |
| 0 | ||
| APF6-025-03.5-S-06-0-L-TR | Samtec Inc | 0.635 mm Pitch AcceleRate HP High-Performanc - Tape and Reel (Alt: APF6-025-03.5-S-06-0-L-TR) RoHS : Compliant |
| 0 | ||
| DWM-50-60-L-D-475 | Samtec Inc | Board Stackers & Spacers, Pin Header, 12.07 mm, 100 Contacts, Solder, 2 Rows, 1.27 mm, DWM Series - Rail/Tube (Alt: DWM-50-60-L-D-475) RoHS : Compliant |
| 0 | ||
| DMN3060LQ-13 | Diodes Incorporated | MOSFET BVDSS: 25V~30V SOT23 T&R 10K - Tape and Reel (Alt: DMN3060LQ-13) RoHS : Compliant |
| 0 | ||
| NFCS1060L3TT | onsemi | Intelligent Power Module (IPM), PFC Combo, 600V, 10A - Rail/Tube (Alt: NFCS1060L3TT) RoHS : Compliant | 0 | |||
| SEAF-20-06.0-L-05-2-A-K-TR | Samtec Inc | - Tape and Reel (Alt: SEAF-20-06.0-L-05-2-A-K-TR) RoHS : Compliant |
| 0 | ||
| SEAF-50-06.0-L-06-2-A-K-FR | Samtec Inc | Mezzanine Connector, High Density Array, Female, 1.27 mm, 6 Rows, 300 Contacts, Straight, Solder - Tape and Reel (Alt: SEAF-50-06.0-L-06-2-A-K-FR) RoHS : Compliant |
| 0 | ||
| LSHM-120-06.0-L-DV-A-S-TR | Samtec Inc | - Tape and Reel (Alt: LSHM-120-06.0-L-DV-A-S-TR) RoHS : Compliant |
| 0 | ||
![]() Newark | YU0AC102M060L20C5H | SPC Multicomp | Cap, 1000Pf, 20%; |Multicomp Pro YU0AC102M060L20C5H RoHS : Compliant |
| 5,020 | |
| TPI078060L068N | KEMET Corporation | Inductor, 68Nh, Shielded, 53A; |Kemet TPI078060L068N RoHS : Compliant |
| 168 | ||
| TPI078060L068N | KEMET Corporation | Inductor, 68Nh, Shielded, 53A; |Kemet TPI078060L068N RoHS : Compliant |
| 168 | ||
| TMS-110-60-L-S | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 10Pos; |Samtec, Inc. TMS-110-60-L-S RoHS : Compliant |
| 161 | ||
| LSHM-140-06.0-L-DV-A-N-K-TR | Samtec Inc | Mezzanine Conn, Hermaphroditic, 80Pos; |Samtec, Inc. LSHM-140-06.0-L-DV-A-N-K-TR RoHS : Compliant |
| 128 | ||
| DWM-10-60-L-D-540 | Samtec Inc | Conn Stack Brd, 1.27Mm, 20Pos, Hdr; |Samtec, Inc. DWM-10-60-L-D-540 RoHS : Compliant |
| 127 | ||
| TMS-150-60-L-S | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 50Pos; |Samtec, Inc. TMS-150-60-L-S RoHS : Compliant |
| 107 | ||
| TMS-120-60-L-D | Samtec Inc | Pin Header, Tms-120-60-L-D; |Samtec, Inc. TMS-120-60-L-D RoHS : Not Compliant |
| 90 | ||
| HTMS-130-60-L-S | Samtec Inc | Pin Header, Htms-130-60-L-S; |Samtec, Inc. HTMS-130-60-L-S RoHS : Compliant |
| 70 | ||
| LSHM-120-06.0-L-DV-A-S-TR | Samtec Inc | Mezzanine Conn, Herma, 40Pos, 2Row; |Samtec, Inc. LSHM-120-06.0-L-DV-A-S-TR RoHS : Compliant |
| 45 | ||
| SEAF-20-06.0-L-04-2-A-K-TR | Samtec Inc | Conn, Array Female, 80Pos, 4Row, 1.27Mm; |Samtec, Inc. SEAF-20-06.0-L-04-2-A-K-TR RoHS : Compliant |
| 44 | ||
| LSHM-140-06.0-L-DV-A-S-K-TR | Samtec Inc | Mezzanine Conn, Herma, 80Pos, 2Row; |Samtec, Inc. LSHM-140-06.0-L-DV-A-S-K-TR RoHS : Compliant |
| 43 | ||
| SEAF-50-06.0-L-10-2-A-K-TR | Samtec Inc | Conn, Array Female, 500Pos, 10Row/1.27Mm; |Samtec, Inc. SEAF-50-06.0-L-10-2-A-K-TR RoHS : Compliant |
| 17 | ||
| LSHM-140-06.0-L-DV-A-S-K-TR | Samtec Inc | Mezz Conn, Herma, 80P, 2Row, 0.5Mm, Smt; |Samtec, Inc. LSHM-140-06.0-L-DV-A-S-K-TR RoHS : Compliant |
| 3 | ||
| T3RC0060-LF | Teledyne Lecroy | Current Probe, 60A, 5Mhz, 1M Cable; Meter Side Connector:Bnc; Probe Side Connector:Flexible Cord Probe; Current Range Max:60A; Current Range Min:-; For Use With:Teledyne Test Tools Oscilloscopes, Teledyne Lecroy Oscilloscopes Rohs Compliant: Yes RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | ADSP-21060LCW-160![]() | Analog Devices Inc | SHARC IND. 3V 40MHZ CQFP HEAT RoHS : Compliant | 0 | ||
![]() RS | 71600-060LF | Amphenol FCi | CONNECTOR IDC RECEPTACLE(FEMALE) CENTRAL&DUAL POLARIZATION 60 CONTACT GOLD GREY RoHS : Compliant |
| 1,023 | |
| RTY060LVDDA | Honeywell Sensing and Control | HALL EFFECT ROTARY POSITION SENSOR, 60DEG, 5V, DUAL INVERSE OUTPUT, RTY SERIES |
| 18 | ||
| FD3060L | Eaton Cutler-Hammer | MOLDED CASE CIRCUIT BREAKERS THERMAL MAGNETIC 60A 3 POLE 600/250VAC/VDC C SERIES |
| 8 | ||
| 45000060 (LCPLC-714) | RS Pro | NON-RECHARGEABLE BATTERY PACK 3V 1.8AH LITHIUM CARBON MONOFLUORIDE PLC BACKUP |
| 6 | ||
| HFD3060L (6639C98G92) | Eaton Cutler-Hammer | MOLDED CASE CIRCUIT BREAKERS 3 POLE 60A THERMAL MAGNETIC FD FRAME C SERIES |
| 6 | ||
| 060L416366 | Danfoss A/S | CONTACT FUNCTION: SPDT GOLD, SENSOR TYPE: RIGID SENSOR, ENCLOSURE RATING IP: IP |
| 4 | ||
| 3SB2206-0LH01 | Siemens | PUSHBUTTON, MOMENTARY, EXT, CLR, ILL ;3SB2206-0LH01 RoHS : Compliant |
| 4 | ||
| 060L310666 | Danfoss A/S | TEMPERATURE SWITCH, TYPE KPS81; 140-302F, 9.0-45F DIFFERENTIAL, ARMORED SENSOR |
| 2 | ||
| K50RF-8060-LDQ (NULL) | Banner Engineering Corp | RADAR SENSOR, R-GAGE, 2.5M, 10-30VDC, NPN/PNP, QD, K50R |
| 2 | ||
| BDL46060LU | Schneider Electric | POWERPACT-CIRCUIT BREAKER-60A 4P AC 18KA AT 480/440V(UL/IEC)-TMD-EVERLINK LUG RoHS : Compliant |
| 1 | ||
| 060L315666 | Danfoss A/S | KPS 80 THERMOSTAT, KPS80 SERIES |
| 1 | ||
| 060L311866 | Danfoss A/S | TEMPERATURE SWITCH, TYPE KPS77; 68-140F, 5.4-25.2F DIFFERENTIAL, RIGID SENSOR |
| 1 | ||
| 060L328066 | Danfoss A/S | SENSOR POCKET FOR ALL TEMPERATURE SWITCHES; 4.5 IN., BRASS, 1/2-14 NPT |
| 1 | ||
| 060L326466 | Danfoss A/S | SENSOR POCKET FOR ALL TEMPERATURE SWITCHES; 3 IN., BRASS, 1/2-14 NPT |
| 1 | ||
| PN4060L1200C | Siemens | PRO PANEL LC MAIN LUG 40S/60C 1 PHASE 200A N1 GRAY |
| 1 | ||
![]() Microchip Technology Inc | ZL38060LDG1 | Microchip Technology Inc | Audio processor for connected home application, VQFN, Projected EOL: 2046-04-25 RoHS : Compliant |
| 7,135 | |
| ZL38060LDF1 | Microchip Technology Inc | Audio processor for connected home application, VQFN, Projected EOL: 2046-04-25 RoHS : Compliant |
| 2,700 | ||
| 2N2060L | Microchip Technology Inc | Dual Small-Signal BJT _ TO-78, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JAN2N2060L | Microchip Technology Inc | Dual Small-Signal BJT _ TO-78, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| APT12060LVRG | Microchip Technology Inc | MOSFET MOS 5 1200 V 600 mOhm TO-264, TO-264, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| JANTX2N2060L | Microchip Technology Inc | Dual Small-Signal BJT _ TO-78, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANTXV2N2060L | Microchip Technology Inc | Dual Small-Signal BJT _ TO-78, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| APT12060LVFRG | Microchip Technology Inc | FREDFET MOS 5 1200 V 600 mOhm TO-264, TO-264, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | NFCS1060L3TT | onsemi | Power Driver Module IGBT 600V 10A 25-SIP Tube RoHS : Compliant |
| 76 | |
| NFAQ1060L36T | onsemi | Intelligent Power Module (IPM), 600 V, 10 A RoHS : Compliant |
| 265 | ||
| NDB5060L | onsemi | MOSFET N-Channel 60V 26A (Tc) TO-263-3 T/R RoHS : Compliant |
| 4,000 | ||
| NDB6060L | onsemi | N-Channel Logic Level Enhancement Mode Field Effect Transistor 60V, 48A, 25mΩ RoHS : Compliant |
| 946 | ||
| NFP36060L42T | onsemi | Power Driver Module Logic 600V 60A 27-DIP Tube RoHS : Compliant |
| 89 | ||
| NDP6060L | onsemi | MOSFET N-Channel 60V 48A (Tc) TO-220-3 Tube RoHS : Compliant |
| 584 | ||
| ADSP-21060LDW-148 | Analog Devices Inc | SHARC Digital Signal Processor RoHS : Not Compliant |
| 48 | ||
| ADSP-21060LDW-148/QML | Analog Devices Inc | SHARC Digital Signal Processor (5962-9674402QYC) RoHS : Not Compliant |
| 17 | ||
ADSP-21060LKS-133![]() | Analog Devices Inc | Digital Signal Processor, 32-Bit Size, 48-Ext Bit, 33.33MHz, CMOS, PQFP240 RoHS : Not Compliant |
| 3,474 | ||
| HMC1060LP3ETR | Analog Devices Inc | HMC1060 - Quad Low Noise High PSRR Linear Voltage Regulator RoHS : Compliant |
| 544,781 | ||
PTH12060LAS![]() | Texas Instruments | DC/DC CONVERTER 1 OUT 800mV to 1.8V 10A 18W 10-SMD Tray RoHS : Not Compliant |
| 774 | ||
| APS11060LUAA-0SL | Allegro MicroSystems LLC | Hall Effect Sensor, 0.5mT Min, 7mT Max, BICMOS, Rectangular, 3 Pin, Through Hole Mount RoHS : Compliant |
| 16,000 | ||
| NDB4060L | Fairchild Semiconductor Corporation | Power Field-Effect Transistor, 15A I(D), 60V, 0.08ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB RoHS : Not Compliant |
| 1,600 | ||
![]() Sager | DWM-50-60-L-D-475 | Samtec Inc | Samtec .050 x .100 Flex Stack, Flexible Micro Board Stacker RoHS : Compliant |
| 56 | |
| MTMS-110-60-L-D-375 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| APF6-025-03.5-S-06-0-L-TR | Samtec Inc | 0.635 MM PITCH ACCELERATE� HP HIGH-PERFORMANCE ARRAY SOCKET RoHS : Compliant |
| 0 | ||
| LCS06A060L03PC | C&K Switches | Basic / Snap Action Switches RoHS : Compliant | 0 | |||
| LCS06A060L19SC | C&K Switches | Basic / Snap Action Switches SPDT SUB-MIN 6A RoHS : Compliant | 0 | |||
| MRTDT-10-20-F-06.0-L1 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MRTDT-12-20-F-06.0-L1 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| SEAF-20-06.0-L-05-2-A-K-TR | Samtec Inc | Board to Board & Mezzanine Connectors .050 SEARAY High-Speed High-Density Open-Pin-Field Array Socket RoHS : Compliant |
| 0 | ||
| SEAF-50-06.0-L-06-2-A-K-FR | Samtec Inc | Board to Board & Mezzanine Connectors .050 SEARAY High-Speed High-Density Open-Pin-Field Array Socket RoHS : Compliant |
| 0 | ||
| HDWM-20-60-L-D-545 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| LSEM-020-06.0-L-DV-A-N | Samtec Inc | Board to Board & Mezzanine Connectors 0.80 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip | 0 | |||
| LSHM-120-06.0-L-DV-A-S-TR | Samtec Inc | Board to Board & Mezzanine Connectors 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip RoHS : Compliant |
| 0 | ||
| MTMS-120-60-L-D-200 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| MTMS-120-60-L-D-570 | Samtec Inc | Board to Board & Mezzanine Connectors .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMS-140-60-L-S-605 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() Coilcraft Direct | CST2-060LC | Coilcraft Inc | Current sensor, SMT, RoHS RoHS : Compliant |
| 342 | |
| CST1-060LC | Coilcraft Inc | Current sensor, SMT, RoHS RoHS : Compliant |
| 339 | ||
| HP4-0060LD | Coilcraft Inc | Hexa-Path configurable magnetics, high current, SMT, RoHS RoHS : Compliant |
| 193 | ||
| HPH4-0060LD | Coilcraft Inc | Hexa-Path configurable magnetics, high inductance, SMT, RoHS RoHS : Compliant |
| 129 | ||
| CST2010-060LD | Coilcraft Inc | Current sensor, SMT, RoHS RoHS : Compliant |
| 0 | ||
| CST1-060LD | Coilcraft Inc | Current sensor, SMT, RoHS RoHS : Compliant |
| 0 | ||
![]() TME | 71600-060LF | Amphenol Corporation | Connector: IDC; female; data; PIN: 60; Quickie; straight; 2.54mm |
| 2,520 | |
| 10129376-4060LF | Amphenol Corporation | 10129376-4060LF |
| 160 | ||
| 060L118466 | Danfoss A/S | Sensor: thermostat with capillary; SPDT; 16A; 400VAC; 30÷90°C |
| 1 | ||
| 060L312866 | Danfoss A/S | Sensor: thermostat with capillary; SPDT; PG13,5; Temp: -40÷70°C |
| 0 | ||
| 060L313266 | Danfoss A/S | Sensor: thermostat with capillary; SPDT; PG13,5; Temp: -40÷70°C |
| 0 | ||
| 060L325466 | Danfoss A/S | Sensor pocket; G1/2"; Capillary tube lenght: 250mm; Øout: 15mm |
| 0 | ||
| 060L311966 | Danfoss A/S | Sensor: thermostat with capillary; SPDT; PG13,5; Temp: -40÷70°C |
| 0 | ||
| 060L333066 | Danfoss A/S | Sensor pocket; G1/2"; Capillary tube lenght: 110mm; Øout: 15mm |
| 0 | ||
| 060L310866 | Danfoss A/S | Sensor: thermostat with capillary; SPDT; PG13,5; Temp: -40÷70°C |
| 0 | ||
| 060L311266 | Danfoss A/S | Sensor: thermostat with capillary; SPDT; PG13,5; Temp: -40÷70°C |
| 0 | ||
| 060L315366 | Danfoss A/S | Sensor: thermostat with capillary; SPDT; PG13,5; Temp: -25÷70°C |
| 0 | ||
| 060L502066 | Danfoss A/S | Sensor: thermostat with capillary; SPDT; PG13,5; Temp: -25÷70°C |
| 0 | ||
| 060L313666 | Danfoss A/S | Sensor: thermostat with capillary; SPDT; PG13,5; Temp: -40÷70°C |
| 0 | ||
| 060L326266 | Danfoss A/S | Sensor pocket; G1/2"; Capillary tube lenght: 75mm; Øout: 15mm |
| 0 | ||
| 060L310466 | Danfoss A/S | Sensor: thermostat with capillary; SPDT; PG13,5; Temp: -40÷70°C |
| 0 | ||
![]() Ameya Holding Limited | RB060LAM-40TR | ROHM Semiconductor | 40V, 2A, 肖特基势垒二极管 RoHS : Compliant |
| 7,400 | |
| RB060LAM-40TFTR | ROHM Semiconductor | 车载肖特基势垒二极管(AEC-Q101标准) RoHS : Compliant |
| 3,100 | ||
RB060L-40DDTE25![]() | ROHM Semiconductor | Schottky Barrier Diodes (支持 AEC-Q101) RoHS : Compliant |
| 1,500 | ||
| LSHM-110-06.0-L-DV-A-S-TR | Samtec Inc | RoHS : Compliant | 262 | |||
| SEAF-20-06.0-L-04-2-A-K-TR | Samtec Inc | .050 PITCH SOCKET ARRAY ASSEMBLY RoHS : Compliant | 175 | |||
| SEAF-40-06.0-L-06-2-A-K-TR | Samtec Inc | RoHS : Compliant | 167 | |||
| SEAF-50-06.0-L-06-2-A-K-TR | Samtec Inc | Samtec SEAF 系列 排母, 300路, 1.27mm节距, 6行, 表面贴装, 直向, 高速、高密度的开放式引脚区域阵列插座 RoHS : Compliant | 112 | |||
![]() ComSIT USA | HMC1060LP3E | Analog Devices Inc | AVAILABLE EU RoHS : Compliant | 150 | ||
![]() ComSIT USA | SMBF1060LT1G | onsemi | Electronic Component RoHS : Compliant | 24,000 | ||
| HCPL060L500E | Avago Technologies | HIGH SPEED LVTTL COMPATIBLE 3.3 VOLT OPTOCOUPLER Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation, 15MBps RoHS : Compliant | 4,380 | |||
| HCPL060L500 | Avago Technologies | HIGH SPEED LVTTL COMPATIBLE 3.3 VOLT OPTOCOUPLER Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation, 15MBps RoHS : Compliant | 1,500 | |||
| HCPL060L560E | Avago Technologies | HIGH SPEED LVTTL COMPATIBLE 3.3 VOLT OPTOCOUPLER Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation, 15MBps RoHS : Compliant | 1,170 | |||
| FOD060L | Fairchild Semiconductor Corporation | LVTTL/LVCMOS 3.3 V HIGH SPEED-10 MBIT/S LOGIC GATE OPTOCOUPLER Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation, 10MBps RoHS : Compliant | 750 | |||
| HCPL060L000E | Avago Technologies | Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation, 15MBps RoHS : Compliant | 700 | |||
![]() Interstate Connecting Components | 86303425060LF | Amphenol FCi | RoHS : Compliant |
| 0 | |
| 71918-060LF | Amphenol FCi | QUICKIE-71918-060LF RoHS : Compliant | 0 | |||
| 71600-060LF | Amphenol FCi | QKE III FEM CONN GP RoHS : Compliant |
| 0 | ||
| 51939-060LF | Amphenol FCi | PWRBLADE RAH-51939-060LF RoHS : Compliant | 0 | |||
| 10164367-0060LF | Amphenol FCi | 1.0MM PITCH, RECEPTACLE,-ACTIV | 0 | |||
| 10162695-107060LF | Amphenol FCi | CA HSG FOR COMBOLOCK WTB-WHITE | 0 | |||
![]() Chip 1 Exchange | TPI078060L056N | YAGEO Corporation | INSTOCK RoHS : Compliant | 7,800 | ||
| UPIY78060L056N | YAGEO Corporation | INSTOCK RoHS : Compliant | 7,800 | |||
| LSHM-110-06.0-L-DV-A-S-K-T | Samtec Inc | INSTOCK | 7,572 | |||
| LSHM-140-06.0-L-DV-A-N-TR | Samtec Inc | INSTOCK RoHS : Compliant | 3,198 | |||
| NFAP1060L3TT | onsemi | INSTOCK RoHS : Compliant | 2,080 | |||
| LSHM-120-06.0-L-DV-A-N-TR | Samtec Inc | INSTOCK RoHS : Compliant | 1,488 | |||
| DFC32R14P060LHA-TA2030 | Murata Manufacturing Co Ltd | INSTOCK | 1,185 | |||
| BMB2A0060LN2 | TE Connectivity | INSTOCK RoHS : Compliant | 15 | |||
![]() Avnet Abacus | LSEM-130-06.0-L-DV-A-N-K-TR | Samtec Inc | (Alt: LSEM-130-06.0-L-DV-A-N-K-TR) RoHS : Compliant | 2,400 | ||
| LSHM-120-06.0-L-DV-A-S-K-TR | Samtec Inc | (Alt: LSHM-120-06.0-L-DV-A-S-K-TR) RoHS : Compliant | 170 | |||
| PTH12060LAZT | Advanced Energy Industries Inc | Non Isolated Board Mount DCDC Converter POLA Surface Mount DIP 55 W 800 mV 18 V 10 A - Tape and Reel (Alt: PTH12060LAZT) RoHS : Compliant | 0 | |||
| 86303425060LF | Amphenol Corporation | Connector Accessories DSub Female Lever Lock Steel (Alt: 86303425060LF) RoHS : Compliant | 0 | |||
| ST370-60L2KIE3 | Vishay Intertechnologies | (Alt: ST370-60L2KIE3) RoHS : Compliant | 0 | |||
| TMS-150-60-L-S | Samtec Inc | Pin Header BoardtoBoard 127 mm 1 Rows 50 Contacts Through Hole TMS Series (Alt: TMS-150-60-L-S) RoHS : Compliant | 0 | |||
| 0538-002-F-15.0-60LF | CTS Corporation | Cap Trimmer Ceramic 1560pF 200V Top Adj 125C (Alt: 0538-002-F-15.0-60LF) RoHS : Compliant | 0 | |||
| LSHM-120-06.0-L-DV-A-S-TR | Samtec Inc | Mezzanine Connector Hermaphroditic 05 mm 2 Rows 40 Contacts Straight Solder Surface Mount (Alt: LSHM-120-06.0-L-DV-A-S-TR) RoHS : Compliant | 0 | |||
| SEAF-20-06.0-L-05-2-A-K-TR | Samtec Inc | Conn Open Pin Field Array SKT 100 POS 127mm Solder ST SMD TR (Alt: SEAF-20-06.0-L-05-2-A-K-TR) RoHS : Compliant | 0 | |||
| SEAF-50-06.0-L-06-2-A-K-FR | Samtec Inc | Mezzanine Connector High Density Array Female 127 mm 6 Rows 300 Contacts Straight Solder (Alt: SEAF-50-06.0-L-06-2-A-K-FR) RoHS : Compliant | 0 | |||
| SEAF-20-06.0-L-10-1-A-K-TR | Samtec Inc | Mezzanine Connector High Density Array Female 127 mm 10 Rows 200 Contacts Straight Solder (Alt: SEAF-20-06.0-L-10-1-A-K-TR) RoHS : Not Compliant | 0 | |||
| SEAF-20-06.0-L-10-2-A-K-TR | Samtec Inc | (Alt: SEAF-20-06.0-L-10-2-A-K-TR) RoHS : Compliant | 0 | |||
| SEAF-30-06.0-L-06-1-A-K-TR | Samtec Inc | Mezzanine Connector High Density Array Female 127 mm 6 Rows 180 Contacts Straight Solder (Alt: SEAF-30-06.0-L-06-1-A-K-TR) RoHS : Not Compliant | 0 | |||
| SEAF-40-06.0-L-06-2-A-K-TR | Samtec Inc | (Alt: SEAF-40-06.0-L-06-2-A-K-TR) RoHS : Compliant | 0 | |||
| LSHM-140-06.0-L-DV-A-S-K-TR | Samtec Inc | Mezzanine Connector Hermaphroditic 05 mm 2 Rows 80 Contacts Straight Solder Surface Mount (Alt: LSHM-140-06.0-L-DV-A-S-K-TR) RoHS : Compliant | 0 | |||
![]() Avnet Asia | NFCS1060L3TT | onsemi | (Alt: NFCS1060L3TT) RoHS : Compliant | 0 | ||
| QT1005RL600HC060-LF | Pulse Electronics Corporation | PULQT1005RL600HC060-LF CHIP INDUCTOR (Alt: QT1005RL600HC060-LF) RoHS : Compliant | 0 | |||
| 10174690-1UF060LF | Amphenol Corporation | (Alt: 10174690-1UF060LF) RoHS : Compliant | 0 | |||
| APF6-037-03.5-S-06-0-L-TR | Samtec Inc | Mezzanine Connector, Receptacle, Straight, 222 Position, 6 Rows, Surface Mount (Alt: APF6-037-03.5-S-06-0-L-TR) RoHS : Compliant | 0 | |||
| DMN3060LCA3-7 | Diodes Incorporated | Trans MOSFET N-CH 30V 3.9A 3-Pin X4-DSN T/R (Alt: DMN3060LCA3-7) RoHS : Compliant |
| 0 | ||
| SEAF-20-06.0-L-04-2-A-K-TR | Samtec Inc | (Alt: SEAF-20-06.0-L-04-2-A-K-TR) RoHS : Compliant | 0 | |||
| SS2060LHE_R2_00001 | PanJit Semiconductor | (Alt: SS2060LHE_R2_00001) RoHS : Compliant |
| 0 | ||
| QT1608RL600HC060-LF | Pulse Electronics Corporation | (Alt: QT1608RL600HC060-LF) RoHS : Compliant | 0 | |||
| MPCH1060LR45 | KEMET Corporation | Power Inductor (SMD), 450 nH, ? 20%, 32 A, 32 A, 12mm x 10mm x 6mm (Alt: MPCH1060LR45) RoHS : Compliant | 0 | |||
| LSHM-130-06.0-L-DV-A-S-K-TR | Samtec Inc | (Alt: LSHM-130-06.0-L-DV-A-S-K-TR) RoHS : Compliant | 0 | |||
| NDB5060L | onsemi | N-Channel Logic Level Enhancement Mode Field Effect Transistor 60V, 26A, 35mO (Alt: NDB5060L) RoHS : Compliant | 0 | |||
| DMN3060LCA3-7A | Diodes Incorporated | MOSFET BVDSS: 25V~30V X4-DSN1006-3 T&R 1 (Alt: DMN3060LCA3-7A) RoHS : Compliant | 0 | |||
| LSHM-150-06.0-L-DV-A-N-K-TR | Samtec Inc | (Alt: LSHM-150-06.0-L-DV-A-N-K-TR) RoHS : Compliant | 0 | |||
| QT1005RL060-LF | Pulse Electronics Corporation | Ferrite Bead, 0402 [1005 Metric], 60 Ohm, 300 mA, 400 Milliohms, ? 25% (Alt: QT1005RL060-LF) RoHS : Compliant | 0 | |||
| 10186538-010F060LF | Amphenol Corporation | (Alt: 10186538-010F060LF) RoHS : Compliant | 0 | |||
![]() Avnet Silica | RB060L-40TE25 | ROHM Semiconductor | Diode Schottky 40V 2A 2Pin PMDS TR (Alt: RB060L-40TE25) RoHS : Compliant | 99,000 | ||
| DMT12H060LFDF-13 | Diodes Incorporated | (Alt: DMT12H060LFDF-13) RoHS : Compliant | 10,000 | |||
| DMN3060LW-7 | Diodes Incorporated | (Alt: DMN3060LW-7) RoHS : Compliant | 9,000 | |||
| DMC3060LVT-7 | Diodes Incorporated | (Alt: DMC3060LVT-7) RoHS : Compliant | 3,000 | |||
| DMN3060LWQ-7 | Diodes Incorporated | (Alt: DMN3060LWQ-7) RoHS : Compliant | 3,000 | |||
| NDB5060L | onsemi | NChannel Logic Level Enhancement Mode Field Effect Transistor 60V 26A 35mO (Alt: NDB5060L) RoHS : Compliant | 2,400 | |||
| FPCS3060L | onsemi | SPM4 CON 600V 30A (Alt: FPCS3060L) RoHS : Compliant | 0 | |||
| NFAP1060L3T | onsemi | (Alt: NFAP1060L3T) RoHS : Compliant | 0 | |||
| NFCS1060L3TT | onsemi | Intelligent Power Module IPM PFC Combo 600V 10A (Alt: NFCS1060L3TT) RoHS : Compliant | 0 | |||
| NFAQ1060L36T | onsemi | Intelligent Power Module IPM 600 V 10 A (Alt: NFAQ1060L36T) RoHS : Compliant | 0 | |||
| DMN3060LCA3-7 | Diodes Incorporated | (Alt: DMN3060LCA3-7) RoHS : Compliant | 0 | |||
RB060L-40DDTE25![]() | ROHM Semiconductor | Schottky Barrier Diode 40V Repetitive Peak Reverse Voltage 100A Reverse Current Small Power Mold T (Alt: RB060L-40DDTE25) RoHS : Compliant | 0 | |||
| SS2060LHE_R2_00001 | PanJit Semiconductor | (Alt: SS2060LHE_R2_00001) RoHS : Compliant | 0 | |||
| PSDB3060L1_R2_00001 | PanJit Semiconductor | Fast Ultrafast Diode 600 V 30 A Single 18 V 115 ns 230 A TO263 3 Pins (Alt: PSDB3060L1_R2_00001) RoHS : Compliant | 0 | |||
| PSDF3060L1_T0_00001 | PanJit Semiconductor | PECSDF3060L1TPHF005KITO220ACFREDTOFR300FWHFR300FWQI01PJ (Alt: PSDF3060L1_T0_00001) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 67016-060LF | Amphenol FCi | IN STOCK SHIP TODAY |
| 450 | |
| FOD060L | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 165 | ||
| HCPL-060L | Avago Technologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 12 | ||
NDP6060L![]() | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 6 | ||
PTH12060LAH![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
![]() DB Roberts | MS21060L08 | Military Specifications |
| 3 | ||
| 50M035060L025 | Essentra Components | 90 SLOTTED CSK SCREW, M3.5 X . | 0 | |||
| 50M035060L035 | Essentra Components | 90 SLOTTED CSK SCREW, M3.5 X . | 0 | |||
| 50M035060L016 | Essentra Components | 90 SLOTTED CSK SCREW, M3.5 X . | 0 | |||
| 96-DHLM-8060-L-PC | Southco | 0 | ||||
| 50M035060L008 | Essentra Components | 90 SLOTTED CSK SCREW, M3.5 X . | 0 | |||
| 50M035060L020 | Essentra Components | 90 SLOTTED CSK SCREW, M3.5 X . | 0 | |||
| 50M035060L010 | Essentra Components | 90 SLOTTED CSK SCREW, M3.5 X . | 0 | |||
| 50M035060L005 | Essentra Components | 90 SLOTTED CSK SCREW, M3.5 X . | 0 | |||
| 50M035060L006 | Essentra Components | 90 SLOTTED CSK SCREW, M3.5 X . | 0 | |||
![]() EBV Elektronik | HCPL-060L-500E | Broadcom Limited | Optocoupler Digital Output 1 Channel 375 kV 15 Mbaud SOIC 8 Pins (Alt: HCPL-060L-500E) RoHS : Compliant | 1,017,000 | ||
| HCPL-060L | Broadcom Limited | Optocoupler Digital Output 1 Channel 375 kV 15 Mbaud SOIC 8 Pins (Alt: HCPL-060L) RoHS : Not Compliant | 1,600 | |||
| HCPL-060L-560E | Broadcom Limited | Optocoupler Digital Output 1 Channel 375 kV 15 Mbaud SOIC 8 Pins (Alt: HCPL-060L-560E) RoHS : Compliant | 1,500 | |||
| HCPL-060L-000E | Broadcom Limited | Optocoupler Digital Output 1 Channel 375 kV 15 Mbaud SOIC 8 Pins (Alt: HCPL-060L-000E) RoHS : Compliant | 1,300 | |||
| NDP6060L | onsemi | Power MOSFET N Channel 60 V 48 A 0025 ohm TO220 Through Hole (Alt: NDP6060L) RoHS : Compliant | 700 | |||
| NDB5060L | onsemi | NChannel Logic Level Enhancement Mode Field Effect Transistor 60V 26A 35mO (Alt: NDB5060L) RoHS : Compliant | 0 | |||
| FOD060LR2 | onsemi | (Alt: FOD060LR2) RoHS : Compliant | 0 | |||
| ZL38060LDF1 | Microchip Technology Inc | (Alt: ZL38060LDF1) RoHS : Compliant | 0 | |||
| ZL38060LDG1 | Microchip Technology Inc | Timberwolf Audio Processor 64Pin QFN Tray (Alt: ZL38060LDG1) RoHS : Compliant | 0 | |||
| NFCS1060L3TT | onsemi | Intelligent Power Module IPM PFC Combo 600V 10A (Alt: NFCS1060L3TT) RoHS : Compliant | 0 | |||
| NFAQ1060L36T | onsemi | Intelligent Power Module IPM 600 V 10 A (Alt: NFAQ1060L36T) RoHS : Compliant | 0 | |||
| EL060L(TA)-V | Everlight Electronics Co Ltd | 8Pin Optocoupler High Speed (Alt: C190000042) RoHS : Compliant | 0 | |||
HCPL-060L#060![]() | Broadcom Limited | Optocoupler LogicOut Open Collector DCIN 1CH 8Pin SOIC (Alt: HCPL-060L#060) RoHS : Not Compliant | 0 | |||
| HCPL-060L-560 | Broadcom Limited | Optocoupler LogicOut Open Collector DCIN 1CH 8Pin SOIC TR (Alt: HCPL-060L-560) RoHS : Not Compliant | 0 | |||
| APT12060LVFRG | Microchip Technology Inc | (Alt: APT12060LVFRG) RoHS : Compliant | 0 | |||
![]() Flip Electronics | FOD060L | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,136 | |
| NFAQ1060L36T | onsemi | Stock RoHS : Compliant | 1,970 | |||
| NFAQ1060L36T-01 | onsemi | Stock, Ship Today |
| 1,970 | ||
| HCPL-060L-500 | Broadcom Limited | Stock, Ship Today |
| 1,500 | ||
| NFCS1060L3TT | onsemi | Stock, Ship Today RoHS : Compliant | 1,432 | |||
| NFCS1060L3TT-01 | onsemi | Stock, Ship Today |
| 1,144 | ||
| FOD060LR2 | onsemi | Stock, Ship Today RoHS : Compliant |
| 873 | ||
| NFAQ1060L33T | onsemi | Stock, Ship Today RoHS : Compliant | 677 | |||
| NFAQ1060L33T-01 | onsemi | Stock, Ship Today |
| 132 | ||
| NFP36060L42T | onsemi | Stock, Ship Today RoHS : Compliant |
| 60 | ||
![]() Master Electronics | LSHM-140-06.0-L-DV-A-S-K-T | Samtec Inc | 0.50 MM RAZOR BEAM HIGH- RoHS : Compliant |
| 208 | |
| MTMS-110-60-L-D-375 | Samtec Inc | .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| APF6-025-03.5-S-06-0-L-TR | Samtec Inc | 0.635 MM PITCH ACCELERATE RoHS : Compliant |
| 0 | ||
| LCS06A060L19SC | C&K Switches | Switch Snap Action N.O./N.C. SPDT Lever Solder 6A 250VAC 0.1N Screw Mount Bulk RoHS : Compliant |
| 0 | ||
| DWM-20-60-L-S-497 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-50-60-L-D-475 | Samtec Inc | .050 X .100 FLEX STAC RoHS : Compliant |
| 0 | ||
| DWM-50-60-L-D-600 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-50-60-L-S-326 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MRTD-10-28-L-06.0-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MRTDT-10-20-F-06.0-L1 | Samtec Inc | .100 Mini Mate® Double Row Panel Mount Discrete Wire Teflon® Cable Assembly Terminal RoHS : Compliant |
| 0 | ||
| MRTDT-12-20-F-06.0-L1 | Samtec Inc | .100 Mini Mate® Double Row Panel Mount Discrete Wire Teflon® Cable Assembly Terminal RoHS : Compliant |
| 0 | ||
| SEAF-20-06.0-L-05-2-A-K-TR | Samtec Inc | This open pin field array socket features a 1.27 mm x 1.27 mm pitch grid with up to 500 total I/Os. The rugged Edge Rate® contact system is signal integrity optimized with solder charged terminations for ease of processing. SEAF is a 28+ Gbps performance RoHS : Compliant |
| 0 | ||
| SEAF-50-06.0-L-06-2-A-K-FR | Samtec Inc | .050 SEARAY HIGH-SPEED RoHS : Compliant |
| 0 | ||
| HDWM-20-60-L-D-545 | Samtec Inc | Conn Board Stacker HDR 40 POS 13.84mm Stack Height 1.27mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| MTMS-120-60-L-D-200 | Samtec Inc | .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C0060LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Male to N Male Low Loss Cable Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0060LF/HS can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0060LF/HS RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0060LF/HS is built with LMR-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 6,578 | ||
| PE3C0060LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Low Loss Cable 36 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 36 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 36 inch length using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0060LF/HS-36 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0060LF/HS-36 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0060LF/HS-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,356 | ||
| PE3C0060LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Male Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 24 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 24 inch length using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0060LF/HS-24 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0060LF/HS-24 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0060LF/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,356 | ||
| PE3C0060LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Low Loss Cable 48 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 48 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 48 inch length using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0060LF/HS-48 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0060LF/HS-48 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0060LF/HS-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,356 | ||
| PE3C0060LF/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 60 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 60 inch length using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0060LF/HS-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0060LF/HS-60 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0060LF/HS-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,154 | ||
| PE3W02060LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. N Female to TNC Male Cable Using LMR-600 Coax with HeatShrink, LF Solder. PE3W02060LF/HS is a N female to TNC male cable using LMR-600 coax. This Pasternack N female to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our female N to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02060LF/HS N female to TNC male cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13060LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. N Male to BNC Male Cable Using LMR-240-DB Coax with HeatShrink, LF Solder. PE3W13060LF/HS is a N male to BNC male cable using LMR-240-DB coax. This Pasternack N male to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our male N to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13060LF/HS N male to BNC male cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W08060LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. 2.92mm Male to 3.5mm Female Cable Using PE-SR402AL Coax, LF Solder. PE3W08060LF is a 2.92mm male to 3.5mm female cable using PE-SR402AL coax. This Pasternack 2.92mm male to 3.5mm female cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm 3.5mm for connector 2. Our male 2.92mm to female 3.5mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08060LF 2.92mm male to 3.5mm female cable assembly is constructed with PE-SR402AL coax. | 0 | |||
| PE3W00060LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to BNC Female Bulkhead Cable Using LMR-100 Coax, LF Solder. PE3W00060LF is a BNC male right angle to BNC female bulkhead cable using LMR-100A coax. This Pasternack BNC male right angle to BNC female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00060LF BNC male right angle to BNC female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C5060LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to TNC Male Cable Using LMR-240 Coax with HeatShrink, LF Solder. PE3C5060LF/HS is a SMA male right angle to TNC male cable using LMR-240 coax. This Pasternack SMA male right angle to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C5060LF/HS SMA male right angle to TNC male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C2060LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. N Male to TNC Male Cable Using LMR-400-DB Coax with HeatShrink, LF Solder. PE3C2060LF/HS is a N male to TNC male cable using LMR-400-DB coax. This Pasternack N male to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2060LF/HS N male to TNC male cable assembly is constructed with LMR-400-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C3060LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. N Male to BNC Male Cable Using PE-C100-LSZH Coax, LF Solder. PE3C3060LF is a N male to BNC male cable using PE-C100-LSZH coax. This Pasternack N male to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our male N to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3060LF N male to BNC male cable assembly is constructed with PE-C100-LSZH coax. | 0 | |||
| PE36060LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. SC Male Right Angle to N Male Cable Using RG393 Coax with HeatShrink, LF Solder. PE36060LF/HS is a SC male right angle to N male cable using RG393 coax. This Pasternack SC male right angle to N male cable assembly uses a 50 Ohm SC for connector 1 and a 50 Ohm N for connector 2. SC right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SC right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE36060LF/HS SC male right angle to N male cable assembly is constructed with RG393 coax. | 0 | |||
| PE3W22060LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm. N Male to TNC Male Right Angle Cable Using LMR-240-FR Coax, LF Solder. PE3W22060LF is a N male to TNC male right angle cable using LMR-240-FR coax. This Pasternack N male to TNC male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. N to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22060LF N male to TNC male right angle cable assembly is constructed with LMR-240-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C10060LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using LMR-400-LLPX Coax with HeatShrink, LF Solder. PE3C10060LF/HS is a BNC male to BNC male cable using LMR-400-LLPX coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C10060LF/HS BNC male to BNC male cable assembly is constructed with LMR-400-LLPX coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Venkel Ltd. | SS2060LHE-EVL | VENKEL LTD | Rectifier;SOD-123HE;60V;2A RoHS : Not Compliant | 0 | ||
![]() Vyrian | ADSP-21060LCWZ-160![]() | Analog Devices Inc | Digital Signal Processor, 48-Ext Bit, 40MHz, CMOS, CQFP240 RoHS : Compliant | 9,051 | ||
ADSP-21060LKSZ-160![]() | Analog Devices Inc | Digital Signal Processor, 32-Bit Size, 48-Ext Bit, 40MHz, CMOS, PQFP240 RoHS : Compliant | 6,733 | |||
| NFAQ1060L36T | onsemi | AC Motor Controller, 20A, Hybrid RoHS : Compliant | 6,591 | |||
ADSP-21060LKB-160![]() | Analog Devices Inc | Digital Signal Processor, 32-Bit Size, 48-Ext Bit, 40MHz, CMOS, PBGA225 RoHS : Not Compliant | 6,171 | |||
| NFCS1060L3TT | onsemi | Brushless DC Motor Controller, 30A, Hybrid RoHS : Compliant | 5,634 | |||
| ADSP-21060LKS-160X | Analog Devices Inc | 5,630 | ||||
| ADSP-21060LKS-133X | Analog Devices Inc | 5,427 | ||||
| XCKU060-L1FLVD1924E | AMD Xilinx | Field Programmable Gate Array, 725550-Cell, PBGA1924 RoHS : Compliant | 4,170 | |||
| XCKU060-L1FFVC1517I | AMD Xilinx | Field Programmable Gate Array, 725550-Cell, PBGA1517 RoHS : Compliant | 4,137 | |||
| XCKU060-L1FBVA900C | AMD Xilinx | Field Programmable Gate Array, 725550-Cell, PBGA900 RoHS : Compliant | 3,895 | |||
| XCKU060-L1FFVB1760C | AMD Xilinx | Field Programmable Gate Array, 725550-Cell, PBGA1760 RoHS : Compliant | 3,424 | |||
| RD38F4060L0YBB0 | Micron Technology Inc | Memory Circuit, Flash+SDRAM, PBGA103 RoHS : Not Compliant | 2,568 | |||
| XCKU060-L1SFVA784I | AMD Xilinx | Field Programmable Gate Array, 725550-Cell, PBGA784 RoHS : Compliant | 2,555 | |||
| XCKU060-L1FLVB2104C | AMD Xilinx | Field Programmable Gate Array, 725550-Cell, PBGA2104 RoHS : Compliant | 2,062 | |||
| XCKU060-L1FLVF1924C | AMD Xilinx | Field Programmable Gate Array, 725550-Cell, PBGA1924 RoHS : Compliant | 1,500 | |||
![]() Win Source Electronics | DMT12H060LFDF-7 | Diodes Incorporated | MOSFET BVDSS: 101V~250V U-DFN202 RoHS : Compliant |
| 90,000 | |
| HCPL-060L | Broadcom Limited | High Speed LVTTL Compatible 3.3 Volt Optocouplers | OPTOISO 3.75KV OPN COLLECTOR 8SO RoHS : Not Compliant |
| 15,000 | ||
| HCPL-060L-060E | Broadcom Limited | OPTOISO 3.75KV OPN COLLECTOR 8SO / High Speed LVTTL Compatible 3.3 Volt Optocouplers RoHS : Compliant |
| 14,370 | ||
| HCPL-060L-500E | Broadcom Limited | OPTOISO 3.75KV OPN COLLECTOR 8SO RoHS : Compliant |
| 14,330 | ||
| HCPL-060L-000E | Broadcom Limited | OPTOISO 3.75KV OPN COLLECTOR 8SO RoHS : Compliant |
| 14,260 | ||
| HCPL-060L-560E | Broadcom Limited | High Speed LVTTL Compatible 3.3 Volt Optocouplers | OPTOISO 3.75KV OPN COLLECTOR 8SO RoHS : Compliant |
| 14,000 | ||
HCPL-060L#500![]() | Broadcom Limited | OPTOISO 3.75KV OPN COLLECTOR 8SO RoHS : Not Compliant |
| 13,760 | ||
| HMC1060LP3E | Analog Devices Inc | IC REG LINEAR POS ADJ 16QFN RoHS : Compliant |
| 5,000 | ||
| HMC1060LP3ETR | Analog Devices Inc | LDO Regulator Pos 3.3V5V 0.1A/0.5A/0.5A/0.3A 16-Pin LFCSP EP T/R / IC REG LDO ADJ 16SMT RoHS : Compliant |
| 4,520 | ||
| MRF9060LR1 | Nexperia | FET RF 65V 945MHZ NI-360 |
| 1,126 | ||
ADSP-21060LCW-160![]() | Analog Devices Inc | SHARC Processor RoHS : Compliant |
| 100 | ||
ADSP-21060LABZ-160![]() | Analog Devices Inc | SHARC Processor RoHS : Compliant |
| 70 | ||
ADSP-21060LKSZ-160![]() | Analog Devices Inc | IC DSP CONTROLLER 32BIT 240MQFP RoHS : Compliant |
| 52 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |