| Electronic Components Datasheet Search |
|
0482016366 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | CHA-0048-203CS2726 | TE Connectivity | - Bag (Alt: CR3483-000) RoHS : Not Compliant |
| 0 | |
| 4310M-104-820/820L | Bourns Inc | - Rail/Tube (Alt: 4310M-104-820/820L) RoHS : Compliant |
| 0 | ||
ATCA-04-820M-V![]() | Abracon Corporation | Toroidal Inductor, 82 uH, 3 A, 42 Milliohm, ? 20% - Trays (Alt: ATCA-04-820M-V) RoHS : Compliant | 0 | |||
| CM8071504820705S RMB8 | Intel Corporation | (Alt: CM8071504820705S RMB8) RoHS : Not Compliant |
| 0 | ||
| CM8071504820403S RMB5 | Intel Corporation | INTEL CORE I7-13700TE RAPTOR LAKE CPU - Bulk (Alt: CM8071504820403S RMB5) RoHS : Not Compliant |
| 0 | ||
| 4310R-104-820/131L | Bourns Inc | Res Thick Film NET 82 Ohm/130 Ohm 2 Ohm/2% 1.25W ?100ppm/?C TERM Molded 10-Pin SIP Pin Thru-Hole - Rail/Tube (Alt: 4310R-104-820/131L) RoHS : Not Compliant |
| 0 | ||
| CM8071504820606S RMB7 | Intel Corporation | Processor Intel Core i9-13900F CISC 64-Bit 5.6GHz 1700-Pin FCLGA Tray - Bulk (Alt: CM8071504820606S RMB7) RoHS : Compliant |
| 0 | ||
| 4310H-104-820/131 | Bourns Inc | - Rail/Tube (Alt: 4310H-104-820/131) RoHS : Not Compliant |
| 0 | ||
| TCSD-05-D-04.82-01-N-R | Samtec Inc | - Bulk (Alt: TCSD-05-D-04.82-01-N-R) RoHS : Compliant | 0 | |||
| ECS-204.8-20-4X | ECS International Inc | Crystal 20.48MHz 20pF 2-Pin HC-49/US - Bulk (Alt: ECS-204.8-20-4X) RoHS : Compliant |
| 0 | ||
| T1510482000-000 | TE Connectivity | H48B-AD-LB - Boxed Product (Development Kits) (Alt: T1510482000-000) RoHS : Compliant |
| 0 | ||
| 1-690482-0 | TE Connectivity | - Bag (Alt: 1-690482-0) RoHS : Compliant |
| 0 | ||
| CM8071504820805S RMBA | Intel Corporation | - Bulk (Alt: CM8071504820805S RMBA) RoHS : Compliant |
| 0 | ||
| 2-904820-6 | TE Connectivity | - Bulk (Alt: 2-904820-6) RoHS : Not Compliant | 0 | |||
| FA004820R0JE07 | Vishay Intertechnologies | FA004 820 5% E07 e3 - Custom Tape W/Leader (Alt: FA004820R0JE07) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 7847804820 | Wurth Elektronik | MULTILAYER INDUCTOR, 82NH, 0.15A, 0402; RoHS : Compliant |
| 10,000 | |
| 7847804820 | Wurth Elektronik | MULTILAYER INDUCTOR, 82NH, 0.15A, 0402; RoHS : Compliant |
| 10,000 | ||
| 1-100482-01 | Sensirion | RIBBON CABLE, FLAT, 30MM; RoHS : Compliant |
| 49 | ||
| FMCA2048-200CM | Fairview Microwave Inc | COAX CABLE ASSEMBLY; RoHS : Not Compliant |
| 7 | ||
| PVSE 400/48-20 | Block USA Inc. | POWER SUPPLY, AC-DC, 48V, 20A; RoHS : Compliant |
| 7 | ||
| T1510482000-000 | TE Connectivity | HEAVY DUTY CONN, 1 LEVER, SIZE H48B; RoHS : Compliant |
| 7 | ||
| A904820SSFSDN4 | nVent Hoffman | METAL ENCLOSURE; RoHS : Compliant |
| 3 | ||
| FMHR0048-200CM | Fairview Microwave Inc | RF/COAXIAL CBL ASSY, 6.6 FT, 2M, RG223; RoHS : Not Compliant |
| 2 | ||
| 04820004ZXP | Littelfuse Inc | FUSE HOLDER, INDICATING FUSE, PANEL; Fuse Holder Type:Indicating Fuse Holder; Fuse Current:15A; Fuse Size Held:-; Holder Terminals:Pin; No. of Fuses:4Fuses; Product Range:482 Series; Voltage Rating VAC:125V; Voltage Rating VDC:125V RoHS Compliant: Yes RoHS : Compliant | 0 | |||
| 04820008ZXB | Littelfuse Inc | FUSE HOLDER, INDICATING, PCB MOUNT; Fuse Holder Type:Indicating Fuse Holder; Fuse Current:15A; Fuse Size Held:-; Holder Terminals:Pin; No. of Fuses:8Fuses; Product Range:482 Series; Voltage Rating VAC:125V; Voltage Rating VDC:125V RoHS Compliant: Yes RoHS : Compliant | 0 | |||
| 04820003ZXP | Littelfuse Inc | FUSE HOLDER, INDICATING FUSE, PANEL; Fuse Holder Type:Indicating Fuse Holder; Fuse Current:15A; Fuse Size Held:-; Holder Terminals:Pin; No. of Fuses:3Fuses; Product Range:482 Series; Voltage Rating VAC:125V; Voltage Rating VDC:125V RoHS Compliant: Yes RoHS : Compliant | 0 | |||
| 04820007ZXB | Littelfuse Inc | FUSE HOLDER, INDICATING, PCB MOUNT; Fuse Holder Type:Indicating Fuse Holder; Fuse Current:15A; Fuse Size Held:-; Holder Terminals:Pin; No. of Fuses:7Fuses; Product Range:482 Series; Voltage Rating VAC:125V; Voltage Rating VDC:125V RoHS Compliant: Yes RoHS : Compliant | 0 | |||
| 04820001ZXP | Littelfuse Inc | FUSE HOLDER, INDICATING FUSE, PANEL; Fuse Holder Type:Indicating Fuse Holder; Fuse Current:1A; Fuse Size Held:-; Holder Terminals:Pin; No. of Fuses:1Fuses; Product Range:482 Series; Voltage Rating VAC:125V; Voltage Rating VDC:125V RoHS Compliant: Yes RoHS : Compliant | 0 | |||
| 04820010ZXPF | Littelfuse Inc | FUSE HOLDER, INDICATING FUSE, PANEL; Fuse Holder Type:Indicating Fuse Holder; Fuse Current:15A; Fuse Size Held:-; Holder Terminals:Pin; No. of Fuses:10Fuses; Product Range:482 Series; Voltage Rating VAC:125V; Voltage Rating VDC:125V RoHS Compliant: Yes RoHS : Compliant | 0 | |||
| TCSD-05-D-04.82-01-N-R | Samtec Inc | 2MM DOUBLE ROW FEMALE IDC ASSEMBLY; RoHS : Not Compliant |
| 0 | ||
![]() RS | 04820001ZXP | Littelfuse Inc | FUSEHOLDER, ALARM INDICATING FUSE, 15 A (MAX.), 125 VAC (MAX.), PANEL MOUNT RoHS : Compliant |
| 2 | |
| A604820LPG | nVent Hoffman | TYPE 12 ENCL; 60.06X48.06X20.0 GRAY, 60.06X48.06X20.06, STEEL |
| 1 | ||
| 20048205 | Burkert Fluid Control Systems | SOLENOID VALVE, SERVO ASSIST, 6213-EV-A25,0FFMSGM87-K-BCY/AC-LU *, 6213 SERIES |
| 0 | ||
| 52104820 | Lapp Group | SKINDICHT SVRN-M 12X1,5/7/7 RoHS : Compliant |
| 0 | ||
| 100482-01 | Dwyer Instruments Inc | 3000 PHOTO SW/GA MTG STUD ASSY |
| 0 | ||
| 04820014ZXP | Littelfuse Inc | ACS ALARM HLDR PANEL MT 14 POLE RoHS : Compliant |
| 0 | ||
| 04820018ZXB | Littelfuse Inc | ACS ALARM HLDR PCB MT 18 POLE RoHS : Compliant |
| 0 | ||
| 04820010ZXPF | Littelfuse Inc | ACS ALARM HLDR PANEL MT 10 POLE |
| 0 | ||
| 04820014ZXBF | Littelfuse Inc | ACS ALARM HLDR PCB MT 14 POLE RoHS : Compliant |
| 0 | ||
| 4310M-104-820/820L | Bourns Inc | RNET - THK FILM MOLD SIP RoHS : Compliant |
| 0 | ||
| SF-4048-20 (SF404820) | Isostatic Industries Inc | FLANGE BEARING, 1.252 X 1.503 X 1-1/4 X 1-11/16 X 1/8IN, POWDERED METAL BRONZE |
| 0 | ||
| SS-4048-20 (SS404820) | Isostatic Industries Inc | SLEEVE BEARING, SS-4048-20 1.254 X 1.504 X 1-1/4IN, POWDERED METAL BRONZE |
| 0 | ||
| 481048201 (48104-8201) | Siemens | TALON 320A 4J RGLS LVRBPS MS OH/UG-SW W ; 48104-8201 |
| 0 | ||
| BSF-4048-20 (BSF404820) | Isostatic Industries Inc | FLANGE BEARING, 1.2535 X 1.504 X 1-1/4 X 1-3/4 X 3/16IN, POWDERED METAL BRONZE |
| 0 | ||
| N445048203 (N44504-8203) | Siemens | TALON HQ-4S, 320AMP, STEEL, RINGLESSHO ; N44504-8203 |
| 0 | ||
![]() Sager | 04820010ZXPF | Littelfuse Inc | ACS ALARM HLDR PANEL MT 10 POLE | 0 | ||
| 04820014ZXBF | Littelfuse Inc | ACS ALARM HLDR PCB MT 14 POLE RoHS : Compliant |
| 0 | ||
| 04820014ZXP | Littelfuse Inc | ACS ALARM HLDR PANEL MT 14 POLE RoHS : Compliant |
| 0 | ||
| 04820018ZXB | Littelfuse Inc | ACS ALARM HLDR PCB MT 18 POLE RoHS : Compliant |
| 0 | ||
| 04820004ZXP | Littelfuse Inc | ACS ALARM HLDR PANEL MT 4 POLE RoHS : Compliant | 0 | |||
| 04820008ZXB | Littelfuse Inc | ACS ALARM HLDR PCB MT 8 POLE RoHS : Compliant | 0 | |||
| 04820013ZXBF | Littelfuse Inc | ACS ALARM HLDR PCB MT 13 POLE RoHS : Compliant |
| 0 | ||
| 801-41-048-20-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Compliant |
| 0 | ||
| 209-1-1-60-4-8-20-H | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| SCRH104-820 | Signal Transformer Inc | Power Inductors - SMD Inductor SMD 82uH 0.84A0.36ohms100KHz | 0 | |||
| TCSD-05-D-04.82-01-N-R | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| 04820003ZXP | Littelfuse Inc | ACS ALARM HLDR PANEL MT 3 POLE RoHS : Compliant | 0 | |||
| 04820007ZXB | Littelfuse Inc | ACS ALARM HLDR PCB MT 7 POLE RoHS : Compliant | 0 | |||
| 04820009ZXPF | Littelfuse Inc | ACS ALARM HLDR PANEL MT 9 POLE RoHS : Compliant |
| 0 | ||
| 04820021ZXBF | Littelfuse Inc | ACS ALARM HLDR PCB MT 21 POLE RoHS : Compliant |
| 0 | ||
![]() TME | 10142048-20 | TE Connectivity | Temperature,humidity; DFN; OUT: I2C; -40÷125°C; SMD RoHS : Compliant |
| 400 | |
| 11110482-00 | TE Connectivity | 11110482-00 |
| 1 | ||
| 5480048200 | Lapp Group | Cable: servo drive; 10m; Standard: Siemens; ÖLFLEX CONNECT; PUR |
| 0 | ||
| TEN 40-4820 | Traco Power | Converter: DC/DC; 66W; Uin: 36÷75VDC; Uout: 3.3VDC; Uout2: 5VDC; DIP |
| 0 | ||
| PVSE 400/48-20 | Block USA Inc. | Power supply: switching; 960W; 48VDC; 20A; 340÷550VAC; 480÷780VDC |
| 0 | ||
| CSS-12048-208 | Same Sky | Loudspeaker; general purpose; 10W; 8Ω; Ø119x47.5mm; 20kHz; Ø: 119mm RoHS : Compliant |
| 0 | ||
| IFR 04.82.05/U | Baumer Electric Ag | Sensor: inductive |
| 0 | ||
| 00482020 | GSR | Threading die; NPTF 1/8"; 27; high speed steel; H: 11mm; Øout: 30mm |
| 0 | ||
| 15-004820 | Amphenol CONEC | Enclosure for connectors: D-Sub; for cable; straight; shielded |
| 0 | ||
| 04048205 | GSR | Countersink; high speed steel grounded HSS-G; 20.5mm; plunger |
| 0 | ||
| 00482070 | GSR | Threading die; NPTF 1"; 11.5; high speed steel; H: 25mm; Øout: 65mm |
| 0 | ||
| 10048200 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 19; THT; 3A; 250V; 1x19 |
| 0 | ||
| IFR 04.82.05 | Baumer Electric Ag | Sensor: inductive |
| 0 | ||
| SLVW3SMD04820ZSM | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 20; SMT; 1.5A; 125V |
| 0 | ||
| APA0604820M016R | Kyocera AVX Components | Capacitor: polymer; H: 4mm; 82uF; 16VDC; 1.5A; SMD; ESR: 40mΩ; APA |
| 0 | ||
![]() Interstate Connecting Components | T1510482000-000 | TE Connectivity | H48B-AD-LB IP65 HOOD & HOUSING RoHS : Compliant |
| 12 | |
| 60482051 | WAGO Innovative Connections | EMD 40175432 |
| 4 | ||
| 1-690482-0 | TE Connectivity | FRONT SHEAR PLATE RoHS : Compliant |
| 1 | ||
| CHA-0048-203CS2726 | TE Connectivity | CHA-0048-203CS2726 | 0 | |||
| 6-690482-0 | TE Connectivity | PLATE, FRONT SHEAR RoHS : Compliant |
| 0 | ||
| EC0482-000 | TE Connectivity | 06153912 RoHS : Compliant | 0 | |||
| 15-004820 | Conec Corporation | HAUBE IP67 D-SUB 15P METALLIS. RoHS : Compliant | 0 | |||
| ZPF000000000204820 | TE Connectivity | DBAS 974-25-19 PN 059 | 0 | |||
| 71-304820-41P | Amphenol Industrial Operations | 0 | ||||
| 71-304820-41P | Amphenol Aerospace | 0 | ||||
| 249-3048-200 | ITT Interconnect Solutions | 249-3048-200 | 0 | |||
| 5-690482-0 | TE Connectivity | PLATE, FRONT SHEAR RoHS : Compliant |
| 0 | ||
| 10220482-00 | TE Connectivity | 9216-0505021306: CTO-12000000- | 0 | |||
| 057-3048-200 | ITT Interconnect Solutions | 057-3048-200 | 0 | |||
| 7-690482-0 | TE Connectivity | PLATE, FRONT SHEAR RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | 10-482099-008 | Amphenol Corporation |
| 0 | ||
![]() Richardson RFPD | CVCO55CL-0482-0498 | Crystek Corporation | Oscillator VCO 482MHz to 498MHz 5V 16-Pin SMD T/R RoHS : Compliant | 0 | ||
| CRBV55CL-0482-0498 | Crystek Corporation | Red Box VCO RoHS : Compliant | 0 | |||
| 10142048-20 | TE Connectivity | Digital Relative Humidity and Temperature Sensor RoHS : Not Compliant |
| 0 | ||
![]() Avnet Abacus | 1048204 | Phoenix Contact | FMC 1510ST35 2BDX10110 FMC1510ST352BDX10110 (Alt: 1048204) RoHS : Compliant | 0 | ||
| 6-690482-0 | TE Connectivity | (Alt: 6-690482-0) RoHS : Compliant | 0 | |||
| 6-690482-0 | TE Connectivity | (Alt: 6-690482-0) RoHS : Compliant | 0 | |||
| 1-690482-0 | TE Connectivity | (Alt: 1-690482-0) RoHS : Compliant | 0 | |||
| 1-690482-0 | TE Connectivity | (Alt: 1-690482-0) RoHS : Compliant | 0 | |||
| EC0482-000 | TE Connectivity | (Alt: EC0482-000) RoHS : Compliant | 0 | |||
| 5050704820 | Molex | - Tape and Reel (Alt: 5050704820) RoHS : Compliant | 0 | |||
| 5-690482-0 | TE Connectivity | (Alt: 5-690482-0) RoHS : Compliant | 0 | |||
| 5-690482-0 | TE Connectivity | (Alt: 5-690482-0) RoHS : Compliant | 0 | |||
| 1804820000 | Weidmüller Interface GmbH & Co. KG | Conn Shrouded Header HDR 14 POS 35mm Solder ST ThruHole Box (Alt: 1804820000) RoHS : Compliant | 0 | |||
| AAB0482-00 | TE Connectivity | (Alt: AAB0482-00) RoHS : Compliant | 0 | |||
| 4305.0048.20 | Schurter Electronic Components | (Alt: 4305.0048.20) RoHS : Compliant | 0 | |||
| BFC242048202 | Vishay Intertechnologies | Power Film Capacitor Metallized PP Radial Box 2 Pin 8200 pF 2 Through Hole 160 V 630 V (Alt: BFC242048202) RoHS : Compliant | 0 | |||
| SDR0604-820KL | Bourns Inc | - Tape and Reel (Alt: SDR0604-820KL) RoHS : Compliant | 0 | |||
| T1510482000-000 | TE Connectivity | H48BADLB (Alt: T1510482000-000) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 0482040001 | Molex | USB Connector, Receptacle, USB 2.0, USB Type A, 4 Ways, Gold, THT, Right Angle, Phosphor Bronze (Alt: 0482040001) RoHS : Compliant | 0 | ||
| CY0482-000 | TE Connectivity | (Alt: CY0482-000) RoHS : Compliant | 0 | |||
| 10142048-20 | TE Connectivity | HTU31D I.C 31D RH/T DIGITAL R400 (Alt: 10142048-20) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 04820001ZXP | Littelfuse Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 12 | |
| 04820001ZXPF | Littelfuse Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 5 | ||
![]() DB Roberts | 60482037 | GRIPCO STANLEY | 0 | |||
| 304820041152 | Essentra Components | 0 | ||||
| EX048-20 | Sugatsune Kogyo Co Ltd | FLUQS HOOK | 0 | |||
| 048200011407 | Essentra Components | 0 | ||||
| 1020482001VR | Essentra Components | 0 | ||||
![]() EBV Elektronik | CM8071504820605S RMB6 | Intel Corporation | (Alt: 99C4X3) RoHS : Compliant | 0 | ||
| CM8071504820908S RN41 | Intel Corporation | 26482 DC PLUG SZ 10 CAD OD (Alt: 99CFF4) RoHS : Compliant | 0 | |||
| CM8071504820805S RMBA | Intel Corporation | (Alt: 99C4X9) RoHS : Compliant | 0 | |||
| CM8071504820722S RN3Y | Intel Corporation | INTEL CORE I714700KF RAPTOR LAKE CPU (Alt: 99CFF1) RoHS : Compliant | 0 | |||
| CM8071504820610S RN3W | Intel Corporation | (Alt: 99CFDT) RoHS : Compliant | 0 | |||
| CM8071504820816S RN3Z | Intel Corporation | (Alt: 99CFF2) RoHS : Compliant | 0 | |||
| CM8071504820406S RN3U | Intel Corporation | (Alt: 99CFDN) RoHS : Compliant | 0 | |||
| CM8071504820817S RN40 | Intel Corporation | INTEL CORE I7 14700 RAPTOR LAKE CPU (Alt: 99CFF3) RoHS : Compliant | 0 | |||
| CM8071504820806S RMBB | Intel Corporation | Processor Intel Core i713700F CISC 64Bit 52GHz 1700Pin FCLGA Tray (Alt: 99C4XD) RoHS : Compliant | 0 | |||
| CM8071504820721S RN3X | Intel Corporation | INTEL CORE I714700K RAPTOR LAKE CPU (Alt: 99CFDW) RoHS : Compliant | 0 | |||
| CM8071504820609S RN3V | Intel Corporation | Intel Core i9 processor 14900 36M Cache up to 580 GHz FCLGA16A Tray (Alt: 99CFDP) RoHS : Compliant | 0 | |||
| CM8071504820903S RMBC | Intel Corporation | Intel Core i713700T Processor 30M Cache up to 490 GHz FCLGA16A Tray (Alt: 99C4XK) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 1310482-001 | Whitmore/Wirenetics | Wire Placehldr | 315 | ||
| 1310482-001S | Whitmore/Wirenetics | Wire Placehldr | 58 | |||
| 100-110-4820 | BJG Electronics | BJG Microwave C | 4 | |||
![]() Master Electronics | B1048204 | TE Connectivity | Boot Seal - TT Series - 10-48 UNS-2B Thread Size - 0.520 (13.21mm) Height - Splash Proof - Silicone Rubber - Red. RoHS : Compliant |
| 1,205 | |
| CHA-0048-203CS2726 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part RYCCHA-0048-203CS2726 MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 4310M-104-820/820L | Bourns Inc | Res Thick Film NET 82 Ohm/82 Ohm 2 Ohm 1.5W ±100ppm/°C TERM Molded 10-Pin SIP Pin Thru-Hole RoHS : Compliant |
| 0 | ||
| HCMD-10-D-04.82-01-R | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 4310R-104-820/131L | Bourns Inc | Res Thick Film NET 82 Ohm/130 Ohm 2 Ohm/2% 1.25W ±100ppm/°C TERM Molded 10-Pin SIP Pin Thru-Hole RoHS : Compliant |
| 0 | ||
| 4310H-104-820/131 | Bourns Inc | RNET - THK FILM MOLD SIP RoHS : Not Compliant |
| 0 | ||
| TCSD-05-D-04.82-01-N-R | Samtec Inc | Cable Assembly Flat Ribbon 0.122m 28AWG 10 POS IDC Connector to 10 POS IDC Connector SKT-SKT IDT-IDT Bulk RoHS : Compliant |
| 0 | ||
| XN-4004-8206-5 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| 6-690482-0 | TE Connectivity | PLATE FRONT SHEAR RoHS : Not Compliant |
| 0 | ||
| 1-690482-0 | TE Connectivity | FRONT SHEAR PLATE MOQ Reduction RoHS : Compliant |
| 0 | ||
| FFSD-05-D-04.82-01-N-SR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| EC0482-000 | TE Connectivity | Push on Wire Marker Legend: C 2.5 to 4.0mm Dia Wire White RoHS : Compliant |
| 0 | ||
| 2-904820-6 | TE Connectivity | BLADE HDI RoHS : Compliant |
| 0 | ||
| FFSD-05-D-04.82-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 5-904820-5 | TE Connectivity | BLADE HDI RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W04820 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Low Loss Cable Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to BNC male low loss cable using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04820 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W04820 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable using LMR-240-UF coax with Times Microwave components. | 3,395 | ||
| PE3W04820/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Low Loss Cable Using LMR-240-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable using LMR-240-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable using LMR-240-UF coax with Times Microwave components with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W04820/HS can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W04820/HS is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820/HS can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable using LMR-240-UF coax with Times Microwave components with heatshrink. | 3,395 | |||
| PE3W04820-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to BNC Male Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to BNC male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04820-12 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W04820-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820-12 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components. |
| 679 | ||
| PE3W04820-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to BNC Male Low Loss Cable 24 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to BNC male low loss cable 24 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 24 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04820-24 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W04820-24 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820-24 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 24 inch length using LMR-240-UF coax with Times Microwave components. |
| 679 | ||
| PE3W04820-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMA Male to BNC Male Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to BNC male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04820-300 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W04820-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820-300 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components. |
| 679 | ||
| PE3W04820-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to BNC Male Low Loss Cable 36 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to BNC male low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04820-36 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W04820-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820-36 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components. |
| 679 | ||
| PE3W04820-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to BNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04820-60 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W04820-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820-60 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components. |
| 679 | ||
| PE3W04820/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male to SMA Male Low Loss Cable 12 Inch Length Using LMR-240-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W04820/HS-12 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W04820/HS-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820/HS-12 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components with heatshrink. |
| 679 | ||
| PE3W04820/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Male to SMA Male Low Loss Cable 24 Inch Length Using LMR-240-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable 24 inch length using LMR-240-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 24 inch length using LMR-240-UF coax with Times Microwave components with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W04820/HS-24 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W04820/HS-24 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820/HS-24 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable 24 inch length using LMR-240-UF coax with Times Microwave components with heatshrink. |
| 679 | ||
| PE3W04820/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. BNC Male to SMA Male Low Loss Cable 300 Inch Length Using LMR-240-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W04820/HS-300 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W04820/HS-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820/HS-300 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components with heatshrink. |
| 679 | ||
| PE3W04820/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Male to SMA Male Low Loss Cable 36 Inch Length Using LMR-240-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W04820/HS-36 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W04820/HS-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820/HS-36 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components with heatshrink. |
| 679 | ||
| PE3W04820/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male to SMA Male Low Loss Cable 60 Inch Length Using LMR-240-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W04820/HS-60 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W04820/HS-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820/HS-60 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with heatshrink. |
| 679 | ||
| PE3M0048-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/84-RG223-0XDS2, RF Cable Type: M17/84-RG223, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. MIL-DTL-17 N Female Bulkhead to SMA Male Cable 200 cm Length Using M17/84-RG223 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to SMA male cable 200 cm length using M17/84-RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to SMA male cable 200 cm length using M17/84-RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 type N to M39012/55-3028 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 N type bulkhead cable connection on one end and M39012/55-3028 SMA cable connection on the other. Our M39012/03-0503 type N to M39012/55-3028 SMA cable assemblies have a female gender on end 1 and male on end 2. This M39012/03-0503 type N to M39012/55-3028 SMA cable is a female to male coax assembly, PE3M0048-200CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 N type jack to M39012/55-3028 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 type N jack to M39012/55-3028 SMA plug cable assembly PE3M0048-200CM is built with M17/84-RG223 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 type N to M39012/55-3028 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 N type female bulkhead to M39012/55-3028 SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0048-200CM can also be used in the other direction and will be M39012/55-3028 SMA male to M39012/03-0503 type N female bulkhead cable assembly if the opposite connectivity is required. M39012/03-0503 type N jack bulkhead to M39012/55-3028 SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 N type to M39012/55-3028 SMA cable assembly for quick shipment worldwide. Variations of M39012/03-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to SMA male cable 200 cm length using M17/84-RG223 coax. |
| 125 | ||
| PE7048-20 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 12.4 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.35:1, Attenuation: 20 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 20 dB Fixed Attenuator, N Male to N Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 12.4 GHz. PE7048-20 is a fixed 20 dB attenuator from Pasternack. This 20dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7048-20 20 dB attenuator is rated for up to 12.4 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7048-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 8 | ||
| PE3W04820LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Cable Using LMR-240-UF Coax, LF Solder. PE3W04820LF is a BNC male to SMA male cable using LMR-240-UF coax. This Pasternack BNC male to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04820LF BNC male to SMA male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() TE Connectivity | 10142048-20 | TE Connectivity | HTU31D I.C 31D RH/T DIGITAL R400 Humidity Sensor Product Type: RH Temperature Module Supply Voltage (Peak): 5.5 VDC Operating Temperature Range: -40 – 125 °C Accuracy: ±2 %RH Interface Signal Type: Digital RH Temperature Module 5.5 VDC | Htu31 Humidity And Temperature Combination Sensor | Part Number: 10142048-20 | Internal Number: 10142048-20 | TE Connectivity RoHS : Compliant |
| 927 | |
| T1500482000-000 | TE Connectivity | H48B-AG-LB Hood & Base Connector Product Type: Base Housing Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1500482000-000 | Internal Number: T1500482000-000 | TE Connectivity RoHS : Compliant |
| 24 | ||
![]() Venkel Ltd. | CRN10-4-820JT | VENKEL LTD | Chip Resistor Array;CRN10;4;82R;�5%;Convex RoHS : Compliant | 0 | ||
![]() Vyrian | CM8071504820805S RMBA | Intel Corporation | 3,788 | |||
| GWS50048209KLX000 | Vishay Intertechnologies | Resistor, Wire Wound, 82ohm, 3000V, 10% +/-Tol, 100,180ppm/Cel RoHS : Compliant | 856 | |||
| GWS50048200KLX000 | Vishay Intertechnologies | Resistor, Wire Wound, 820ohm, 3000V, 10% +/-Tol, 100,180ppm/Cel RoHS : Compliant | 759 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |