| Electronic Components Datasheet Search |
|
0482016363 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Master Electronics | ZPF000000000004820 | TE Connectivity | 901-20 RQ 2-7-0 SN MOQ Reduction RoHS : Compliant |
| 0 | |
| EE0482-000 | TE Connectivity | WCSM-70/20-450-S-(B15) RoHS : Compliant |
| 0 | ||
| TCSD-05-S-04.82-01-N-P01 | Samtec Inc | Ribbon Cables / IDC Cables IDC Socket Cable Assemblies 2.00mm Pitch RoHS : Compliant |
| 0 | ||
| TCSD-10-D-04.82-01-N-R | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 5-904820-5 | TE Connectivity | BLADE HDI RoHS : Compliant |
| 0 | ||
| HCSD-03-D-04.82-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FFSD-05-D-04.82-01-N-SR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SDR0604-820KL | Bourns Inc | Inductor Power Wirewound 82uH 10% 1KHz 20Q-Factor Ferrite 580mA 600mOhm DCR Automotive T/R RoHS : Compliant |
| 0 | ||
| TCSD-10-D-04.82-01-N-RW | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SRR0804-820K | Bourns Inc | Ind Power Shielded Wirewound 82uH 10% 1KHz 20Q-Factor Ferrite 400mA T/R RoHS : Compliant |
| 0 | ||
| FFMD-04-T-04.82-01 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 11110482-00 | TE Connectivity | Te Connectivity Sensors 11110482-00 RoHS : Compliant |
| 0 | ||
| 4310R-104-820/131 | Bourns Inc | Res Thick Film NET 82 Ohm/130 Ohm 2 Ohm/2% 1.25W ±100ppm/°C TERM Molded 10-Pin SIP Pin Thru-Hole RoHS : Not Compliant |
| 0 | ||
| TCSD-10-D-04.82-01-R | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 699-0048-20 | TE Connectivity | Te Connectivity / Deutsch 699-0048-20 RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | ECS-204.8-20-5P-TR | ECS International Inc | - Tape and Reel (Alt: ECS-204.8-20-5P-TR) RoHS : Not Compliant |
| 0 | |
| BFC242048202 | Vishay Intertechnologies | Power Film Capacitor, Metallized PP, Radial Box - 2 Pin, 8200 pF, ? 2%, Through Hole, 160 V, 630 V - Bulk (Alt: BFC242048202) RoHS : Compliant |
| 0 | ||
| TCSD-05-S-04.82-01-N-P01 | Samtec Inc | - Bulk (Alt: TCSD-05-S-04.82-01-N-P01) RoHS : Compliant |
| 0 | ||
| GWS05048208KLX000 | Vishay Intertechnologies | GWS50 SS 8R2 10% - Bulk (Alt: GWS05048208KLX000) RoHS : Not Compliant |
| 0 | ||
| SDR0604-820KL | Bourns Inc | - Tape and Reel (Alt: SDR0604-820KL) RoHS : Compliant |
| 0 | ||
| SRR0804-820K | Bourns Inc | - Tape and Reel (Alt: SRR0804-820K) RoHS : Compliant |
| 0 | ||
| CM8071504820406S RN3U | Intel Corporation | (Alt: CM8071504820406S RN3U) RoHS : Not Compliant |
| 0 | ||
ATCA-04-820M-V![]() | Abracon Corporation | - Trays (Alt: ATCA-04-820M-V) RoHS : Compliant | 0 | |||
| 057-3048-200 | ITT Interconnect Solutions | COMPONENT NOT FOR RESALE E/B ASSY KPT00B SR-10 -A206 - Bulk (Alt: 057-3048-200) RoHS : Not Compliant |
| 0 | ||
| FA004820R0JE07 | Vishay Intertechnologies | FA004 820 5% E07 e3 - Custom Tape W/Leader (Alt: FA004820R0JE07) RoHS : Compliant |
| 0 | ||
| 4310R-104-820/131 | Bourns Inc | - Rail/Tube (Alt: 4310R-104-820/131) RoHS : Not Compliant |
| 0 | ||
| 7-690482-0 | TE Connectivity | - Bag (Alt: 7-690482-0) RoHS : Compliant |
| 0 | ||
| CM8071504820816S RN3Z | Intel Corporation | (Alt: CM8071504820816S RN3Z) RoHS : Not Compliant |
| 0 | ||
| 11190482-00 | TE Connectivity | AST20HAA02500P4R1N000:CTO-13000000-04 - Bulk (Alt: 11190482-00) RoHS : Not Compliant |
| 0 | ||
| GWS30048201KLX000 | Vishay Intertechnologies | Resistor Wirewound 8.2k Ohm 10% 300W 100ppm/K to 180ppm/K Loose Pack - Bulk (Alt: GWS30048201KLX000) RoHS : Compliant |
| 0 | ||
![]() Newark | 7847804820 | Wurth Elektronik | Multilayer Inductor, 82Nh, 0.15A, 0402; |Würth Elektronik 7847804820 RoHS : Compliant |
| 10,000 | |
| 7847804820 | Wurth Elektronik | Multilayer Inductor, 82Nh, 0.15A, 0402; |Würth Elektronik 7847804820 RoHS : Compliant |
| 10,000 | ||
| 1-100482-01 | Sensirion | Ribbon Cable, Flat, 30Mm; |Sensirion 1-100482-01 RoHS : Compliant |
| 49 | ||
| 4305.0048.20 | Schurter Electronic Components | Ke/Kg Voltage Sel. 10A 100/120/230/240V; |Schurter 4305.0048.20 RoHS : Not Compliant |
| 10 | ||
| FMCA2048-200CM | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2048-200CM RoHS : Not Compliant |
| 7 | ||
| T1510482000-000 | TE Connectivity | Heavy Duty Conn, 1 Lever, Size H48B; |Te Connectivity T1510482000-000 RoHS : Compliant |
| 7 | ||
| PVSE 400/48-20 | Block USA Inc. | Power Supply, Ac-Dc, 48V, 20A; |Block PVSE 400/48-20 RoHS : Compliant |
| 4 | ||
| A904820SSFSDN4 | nVent Hoffman | Metal Enclosure; |Nvent Hoffman A904820SSFSDN4 RoHS : Compliant |
| 3 | ||
| FMHR0048-200CM | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 6.6 Ft, 2M, Rg223; |Fairview Microwave FMHR0048-200CM RoHS : Not Compliant |
| 2 | ||
| 900004820 | Hirschmann Electronics GmbH & Co Kg | Rj45S-Rj45S-1533R/11.5F-Blk; |Hirschmann 900004820 RoHS : Not Compliant |
| 0 | ||
| 04820021ZXP | Littelfuse Inc | Fuse Holder, Indicating Fuse, Panel; Fuse Holder Type:Indicating Fuse Holder; Fuse Current:15A; Fuse Size Held:-; Holder Terminals:Pin; No. Of Fuses:21Fuses; Product Range:482 Series; Voltage Rating Vac:125V; Voltage Rating Vdc:125V Rohs Compliant: Yes RoHS : Compliant |
| 0 | ||
| 04820018ZXP | Littelfuse Inc | Fuse Holder, Indicating Fuse, Panel; Fuse Holder Type:Indicating Fuse Holder; Fuse Current:15A; Fuse Size Held:-; Holder Terminals:Pin; No. Of Fuses:18Fuses; Product Range:482 Series; Voltage Rating Vac:125V; Voltage Rating Vdc:125V Rohs Compliant: Yes RoHS : Compliant |
| 0 | ||
| 04820001ZXB | Littelfuse Inc | Fuse Holder, Indicating, Pcb Mount; Fuse Holder Type:Indicating Fuse Holder; Fuse Current:15A; Fuse Size Held:-; Holder Terminals:Pin; No. Of Fuses:1Fuses; Product Range:482 Series; Voltage Rating Vac:125V; Voltage Rating Vdc:125V Rohs Compliant: Yes RoHS : Compliant |
| 0 | ||
| BFC242048202 | Vishay Intertechnologies | Mkp 8,2Nf ±2% 630Vdc Pitch 10Mm; |Vishay BFC242048202 RoHS : Not Compliant |
| 0 | ||
| TCSD-05-S-04.82-01-N-P01 | Samtec Inc | Idc Socket Cable Assemblies; |Samtec, Inc. TCSD-05-S-04.82-01-N-P01 RoHS : Not Compliant |
| 0 | ||
![]() RS | 04820001ZXP | Littelfuse Inc | FUSEHOLDER, ALARM INDICATING FUSE, 15 A (MAX.), 125 VAC (MAX.), PANEL MOUNT RoHS : Compliant |
| 2 | |
| A604820LPG | nVent Hoffman | TYPE 12 ENCL; 60.06X48.06X20.0 GRAY, 60.06X48.06X20.06, STEEL |
| 1 | ||
| 204820-00 | Dwyer Instruments Inc | 175-300-AV ARM & TUBE ASSY |
| 0 | ||
| EE0482-000 | TE Connectivity | WCSM-70/20-450-S-(B15) RoHS : Compliant |
| 0 | ||
| 04820021ZXP | Littelfuse Inc | ACS ALARM HLDR PANEL MT 21 POLE |
| 0 | ||
| BFC242048202 | Vishay BCcomponents | CAPACITOR, FILM, MKP 8,2NF ?2% 630VDC PITCH 10MM |
| 0 | ||
| 5204820790802400 | Norgren | VALVE, H 5204820.7908.024-S10VH10G02, HERION |
| 0 | ||
| 801-43-048-20-001000 | Mill-Max Mfg Corp | STD SPRING-LOADED CONNECTOR, 48 PINS, TIN (MATTE) OVER NICKEL RoHS : Compliant |
| 0 | ||
| 851-93-048-20-001000 | Mill-Max Mfg Corp | STD SPRING-LOADED CONNECTOR, 48 PINS, TIN/LEAD (93/7) OVER NICKEL RoHS : Not Compliant |
| 0 | ||
| 800-10-048-20-001000 | Mill-Max Mfg Corp | STD SPRING-LOADED CONNECTOR, 48 PINS, GOLD OVER NICKEL RoHS : Compliant |
| 0 | ||
| SF-4048-20 (SF404820) | Isostatic Industries Inc | FLANGE BEARING, 1.252 X 1.503 X 1-1/4 X 1-11/16 X 1/8IN, POWDERED METAL BRONZE |
| 0 | ||
| SS-4048-20 (SS404820) | Isostatic Industries Inc | SLEEVE BEARING, SS-4048-20 1.254 X 1.504 X 1-1/4IN, POWDERED METAL BRONZE |
| 0 | ||
| 481048201 (48104-8201) | Siemens | TALON 320A 4J RGLS LVRBPS MS OH/UG-SW W ; 48104-8201 |
| 0 | ||
| BSF-4048-20 (BSF404820) | Isostatic Industries Inc | FLANGE BEARING, 1.2535 X 1.504 X 1-1/4 X 1-3/4 X 3/16IN, POWDERED METAL BRONZE |
| 0 | ||
| N445048203 (N44504-8203) | Siemens | TALON HQ-4S, 320AMP, STEEL, RINGLESSHO ; N44504-8203 |
| 0 | ||
![]() Bisco Industries | AC-CBB0-7-0482-054 | Southco |
| 6 | ||
| A604820LPG | nVent Hoffman | 1 | ||||
![]() Sager | 04820021ZXP | Littelfuse Inc | ACS ALARM HLDR PANEL MT 21 POLE |
| 0 | |
| 801-43-048-20-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Compliant |
| 0 | ||
| 830-10-048-20-005000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
| 851-93-048-20-001000 | Mill-Max Mfg Corp | IC & Component Sockets STANDARD SOCKET HEADER RoHS : Not Compliant |
| 0 | ||
| 800-10-048-20-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
| 803-93-048-20-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Not Compliant |
| 0 | ||
| 82375-0600SGE225-0-5180-4820C | OMRON Electronic Components | DIP Switches / SIP Switches | 0 | |||
| 851-99-048-20-001000 | Mill-Max Mfg Corp | IC & Component Sockets STANDARD SOCKET HEADER RoHS : Not Compliant |
| 0 | ||
| 802-40-048-20-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
| TCSD-05-S-04.82-01-N-P01 | Samtec Inc | Ribbon Cables / IDC Cables IDC Socket Cable Assemblies, 2.00mm Pitch RoHS : Compliant |
| 0 | ||
| 04820018ZXP | Littelfuse Inc | ACS ALARM HLDR PANEL MT 18 POLE RoHS : Compliant |
| 0 | ||
| 0387104820 | Molex | Barrier Terminal Blocks SR BTS PCINSL 20 ASY C | 0 | |||
| 801-41-048-20-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Compliant |
| 0 | ||
| 04820001ZXB | Littelfuse Inc | ACS ALARM HLDR PCB MNT 1 POLE RoHS : Compliant |
| 0 | ||
| 04820012ZXPF | Littelfuse Inc | ACS ALARM HLDR PANEL MT 12 POLE | 0 | |||
![]() TME | 52104820 | Lapp Group | M12; 1.5; IP54; brass; SKINDICHT®; SKINDICHT® SVRN RoHS : Compliant |
| 63 | |
| 11110482-00 | TE Connectivity | 11110482-00 |
| 1 | ||
| 10048200 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 19; THT; 3A; 250V |
| 0 | ||
| 00482070 | GSR | Threading die: inch tubular; NPTF 1"; 11.5; high speed steel |
| 0 | ||
| 10048205 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 20; THT; 3A; 250V |
| 0 | ||
| SLVW3SMD04820GSM | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 20; SMT; 1.5A |
| 0 | ||
| CSS-12048-208 | Same Sky | Loudspeaker; general purpose; 10W; 8Ω; Ø119x47.5mm; 20kHz; Ø: 119mm RoHS : Compliant |
| 0 | ||
| PVSE 400/48-20 | Block USA Inc. | Power supply: switching; 960W; 48VDC; 20A; 340÷550VAC; 480÷780VDC |
| 0 | ||
| IFR 04.82.05/U | Baumer Electric Ag | Sensor: inductive |
| 0 | ||
| DE0704-820 | FerroCore | Inductor: wire; SMD; 820uH; 200mA; R: 5.2Ω; ±20%; 7.3x7.3x4.5mm |
| 0 | ||
| SLVW3SMD04820ZSM | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 20; SMT; 1.5A |
| 0 | ||
| 15-004820 | Amphenol CONEC | Enclosure for connectors: D-Sub; for cable; straight; shielded |
| 0 | ||
| 09 0482 00 08 | Binder UK Ltd | Connector: M9; socket; PIN: 8; female; industrial; 711; 125V; IP40 |
| 0 | ||
| APA0604820M016R | Kyocera AVX Components | Capacitor: polymer; H: 4mm; 82uF; 16VDC; 1.5A; SMD; ESR: 40mΩ; APA |
| 0 | ||
| 40482020 | Stahlwille Tools | Wrench: combination spanner; double-sided; 5/16"; 115mm; chromium |
| 0 | ||
![]() ComSIT USA | 322170482000 | FINDER SpA | Power Relays General Purpose 4mA 48VDC 5-DIP RoHS : Not Compliant | 12 | ||
![]() Interstate Connecting Components | T1510482000-000 | TE Connectivity | H48B-AD-LB IP65 HOOD & HOUSING RoHS : Compliant |
| 12 | |
| 60482051 | WAGO Innovative Connections | EMD 40175432 |
| 4 | ||
| 057-3048-200 | ITT Interconnect Solutions | 057-3048-200 | 0 | |||
| 7-690482-0 | TE Connectivity | PLATE, FRONT SHEAR RoHS : Compliant |
| 0 | ||
| 11190482-00 | TE Connectivity | AST20HAA02500P4R1N000:CTO-1300 | 0 | |||
| 15-004820 | Conec Corporation | HAUBE IP67 D-SUB 15P METALLIS. RoHS : Compliant | 0 | |||
| 449-0048-201 | ITT Interconnect Solutions | SHELL ASSY KJLC0-13B FIN B | 0 | |||
| 6-690482-0 | TE Connectivity | PLATE, FRONT SHEAR RoHS : Compliant |
| 0 | ||
| T1610482000-000 | TE Connectivity | H48B-SGRS-LB-XX RoHS : Compliant |
| 0 | ||
| CHA-0048-203CS2726 | TE Connectivity | CHA-0048-203CS2726 | 0 | |||
| 10220482-00 | TE Connectivity | 9216-0505021306: CTO-12000000- | 0 | |||
| 351-0482-000 | ITT Interconnect Solutions | CA KE 20 18 GROM | 0 | |||
| 5-690482-0 | TE Connectivity | PLATE, FRONT SHEAR RoHS : Compliant |
| 0 | ||
| T1500482000-000 | TE Connectivity | H48B-AG-LB RoHS : Compliant |
| 0 | ||
| 10142048-20 | TE Connectivity | HTU31D I.C 31D RH/T DIGITAL R RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | 10-482099-008 | Amphenol Corporation |
| 0 | ||
![]() Powell Electronics | 10142048-20 | TE Connectivity | Connectors RoHS : Compliant |
| 264 | |
| T1510482000-000 | TE Connectivity | Power Connectors RoHS : Compliant |
| 119 | ||
| 699-0048-20 | TE Connectivity | DEUTSCH CONNECTOR 699-0048-20 |
| 11 | ||
| 11110482-00 | TE Connectivity | SENSOR (TE REF 11110482-00) |
| 1 | ||
![]() Richardson RFPD | CRBV55CL-0482-0498 | Crystek Corporation | Red Box VCO RoHS : Compliant | 0 | ||
| CVCO55CL-0482-0498 | Crystek Corporation | Oscillator VCO 482MHz to 498MHz 5V 16-Pin SMD T/R RoHS : Compliant | 0 | |||
| 10142048-20 | TE Connectivity | Digital Relative Humidity and Temperature Sensor RoHS : Not Compliant |
| 0 | ||
![]() Avnet Abacus | 1048204 | Phoenix Contact | FMC 1510ST35 2BDX10110 FMC1510ST352BDX10110 (Alt: 1048204) RoHS : Compliant | 0 | ||
| 1804820000 | Weidmüller Interface GmbH & Co. KG | Conn Shrouded Header HDR 14 POS 35mm Solder ST ThruHole Box (Alt: 1804820000) RoHS : Compliant | 0 | |||
| 7-690482-0 | TE Connectivity | (Alt: 7-690482-0) RoHS : Compliant | 0 | |||
| 6-690482-0 | TE Connectivity | (Alt: 6-690482-0) RoHS : Compliant | 0 | |||
| 6-690482-0 | TE Connectivity | (Alt: 6-690482-0) RoHS : Compliant | 0 | |||
| 5050704820 | Molex | - Tape and Reel (Alt: 5050704820) RoHS : Compliant | 0 | |||
| 5-690482-0 | TE Connectivity | (Alt: 5-690482-0) RoHS : Compliant | 0 | |||
| 5-690482-0 | TE Connectivity | (Alt: 5-690482-0) RoHS : Compliant | 0 | |||
| AAB0482-00 | TE Connectivity | (Alt: AAB0482-00) RoHS : Compliant | 0 | |||
| BFC242048202 | Vishay Intertechnologies | Power Film Capacitor Metallized PP Radial Box 2 Pin 8200 pF 2 Through Hole 160 V 630 V (Alt: BFC242048202) RoHS : Compliant | 0 | |||
| SDR0604-820KL | Bourns Inc | - Tape and Reel (Alt: SDR0604-820KL) RoHS : Compliant | 0 | |||
| T1510482000-000 | TE Connectivity | H48BADLB (Alt: T1510482000-000) RoHS : Compliant | 0 | |||
| T1500482000-000 | TE Connectivity | (Alt: T1500482000-000) RoHS : Compliant | 0 | |||
803-83-048-20-001101![]() | PRECI-DIP SSA | Conn Socket Strip SKT 48 POS 254mm Solder RA ThruHole Card Box (Alt: 803-83-048-20-001101) RoHS : Compliant | 0 | |||
803-87-048-20-001101![]() | PRECI-DIP SSA | Conn Socket Strip SKT 48 POS 254mm Solder RA ThruHole Box (Alt: 803-87-048-20-001101) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 0482040001 | Molex | USB Connector, Receptacle, USB 2.0, USB Type A, 4 Ways, Gold, THT, Right Angle, Phosphor Bronze (Alt: 0482040001) RoHS : Compliant | 0 | ||
| 10142048-20 | TE Connectivity | (Alt: 10142048-20) RoHS : Compliant | 0 | |||
| CY0482-000 | TE Connectivity | (Alt: CY0482-000) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | ASPI-0504-820K-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | |
| ASPI-0504-820M-T | Abracon Corporation |
| 0 | |||
![]() Component Electronics, Inc | 04820001ZXP | Littelfuse Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 12 | |
| 04820001ZXPF | Littelfuse Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 5 | ||
![]() DB Roberts | 60482037 | GRIPCO STANLEY | 0 | |||
| 048200011407 | Essentra Components | 0 | ||||
| 304820041152 | Essentra Components | 0 | ||||
| 1020482001VR | Essentra Components | 0 | ||||
| EX048-20 | Sugatsune Kogyo Co Ltd | FLUQS HOOK | 0 | |||
![]() EBV Elektronik | CM8071504820406S RN3U | Intel Corporation | (Alt: 99CFDN) RoHS : Compliant | 0 | ||
| CM8071504820816S RN3Z | Intel Corporation | (Alt: 99CFF2) RoHS : Compliant | 0 | |||
| CM8071504820610S RN3W | Intel Corporation | (Alt: 99CFDT) RoHS : Compliant | 0 | |||
| CM8071504820806S RMBB | Intel Corporation | Processor Intel Core i713700F CISC 64Bit 52GHz 1700Pin FCLGA Tray (Alt: 99C4XD) RoHS : Compliant | 0 | |||
| CM8071504820721S RN3X | Intel Corporation | INTEL CORE I714700K RAPTOR LAKE CPU (Alt: 99CFDW) RoHS : Compliant | 0 | |||
| CM8071504820722S RN3Y | Intel Corporation | INTEL CORE I714700KF RAPTOR LAKE CPU (Alt: 99CFF1) RoHS : Compliant | 0 | |||
| CM8071504820605S RMB6 | Intel Corporation | (Alt: 99C4X3) RoHS : Compliant | 0 | |||
| CM8071504820817S RN40 | Intel Corporation | INTEL CORE I7 14700 RAPTOR LAKE CPU (Alt: 99CFF3) RoHS : Compliant | 0 | |||
| CM8071504820908S RN41 | Intel Corporation | 26482 DC PLUG SZ 10 CAD OD (Alt: 99CFF4) RoHS : Compliant | 0 | |||
| CM8071504820805S RMBA | Intel Corporation | (Alt: 99C4X9) RoHS : Compliant | 0 | |||
| CM8071504820609S RN3V | Intel Corporation | Intel Core i9 processor 14900 36M Cache up to 580 GHz FCLGA16A Tray (Alt: 99CFDP) RoHS : Compliant | 0 | |||
| CM8071504820903S RMBC | Intel Corporation | Intel Core i713700T Processor 30M Cache up to 490 GHz FCLGA16A Tray (Alt: 99C4XK) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 1310482-001 | Whitmore/Wirenetics | Wire Placehldr | 315 | ||
| 1310482-001S | Whitmore/Wirenetics | Wire Placehldr | 58 | |||
| 100-110-4820 | BJG Electronics | BJG Microwave C | 4 | |||
![]() Pasternack Enterprises US | PE3W04820 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Low Loss Cable Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to BNC male low loss cable using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04820 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W04820 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable using LMR-240-UF coax with Times Microwave components. | 2,236 | ||
| PE3W04820/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Low Loss Cable Using LMR-240-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable using LMR-240-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable using LMR-240-UF coax with Times Microwave components with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W04820/HS can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W04820/HS is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820/HS can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable using LMR-240-UF coax with Times Microwave components with heatshrink. | 2,236 | |||
| PE3W04820-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to BNC Male Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to BNC male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04820-12 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W04820-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820-12 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components. |
| 497 | ||
| PE3W04820/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Male to SMA Male Low Loss Cable 24 Inch Length Using LMR-240-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable 24 inch length using LMR-240-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 24 inch length using LMR-240-UF coax with Times Microwave components with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W04820/HS-24 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W04820/HS-24 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820/HS-24 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable 24 inch length using LMR-240-UF coax with Times Microwave components with heatshrink. |
| 497 | ||
| PE3W04820-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to BNC Male Low Loss Cable 24 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to BNC male low loss cable 24 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 24 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04820-24 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W04820-24 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820-24 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 24 inch length using LMR-240-UF coax with Times Microwave components. |
| 497 | ||
| PE3W04820/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male to SMA Male Low Loss Cable 12 Inch Length Using LMR-240-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W04820/HS-12 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W04820/HS-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820/HS-12 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components with heatshrink. |
| 497 | ||
| PE3W04820-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to BNC Male Low Loss Cable 36 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to BNC male low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04820-36 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W04820-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820-36 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components. |
| 497 | ||
| PE3W04820/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male to SMA Male Low Loss Cable 60 Inch Length Using LMR-240-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W04820/HS-60 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W04820/HS-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820/HS-60 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with heatshrink. |
| 497 | ||
| PE3W04820/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Male to SMA Male Low Loss Cable 36 Inch Length Using LMR-240-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W04820/HS-36 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W04820/HS-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820/HS-36 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components with heatshrink. |
| 497 | ||
| PE3W04820-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to BNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04820-60 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W04820-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820-60 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components. |
| 497 | ||
| PE3W04820/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. BNC Male to SMA Male Low Loss Cable 300 Inch Length Using LMR-240-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W04820/HS-300 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W04820/HS-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820/HS-300 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components with heatshrink. |
| 248 | ||
| PE3W04820-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMA Male to BNC Male Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to BNC male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04820-300 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W04820-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04820-300 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components. |
| 248 | ||
| PE3M0048-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/84-RG223-0XDS2, RF Cable Type: M17/84-RG223, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. MIL-DTL-17 N Female Bulkhead to SMA Male Cable 200 cm Length Using M17/84-RG223 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to SMA male cable 200 cm length using M17/84-RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to SMA male cable 200 cm length using M17/84-RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 type N to M39012/55-3028 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 N type bulkhead cable connection on one end and M39012/55-3028 SMA cable connection on the other. Our M39012/03-0503 type N to M39012/55-3028 SMA cable assemblies have a female gender on end 1 and male on end 2. This M39012/03-0503 type N to M39012/55-3028 SMA cable is a female to male coax assembly, PE3M0048-200CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 N type jack to M39012/55-3028 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 type N jack to M39012/55-3028 SMA plug cable assembly PE3M0048-200CM is built with M17/84-RG223 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 type N to M39012/55-3028 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 N type female bulkhead to M39012/55-3028 SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0048-200CM can also be used in the other direction and will be M39012/55-3028 SMA male to M39012/03-0503 type N female bulkhead cable assembly if the opposite connectivity is required. M39012/03-0503 type N jack bulkhead to M39012/55-3028 SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 N type to M39012/55-3028 SMA cable assembly for quick shipment worldwide. Variations of M39012/03-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to SMA male cable 200 cm length using M17/84-RG223 coax. |
| 125 | ||
| PE7048-20 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 12.4 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.35:1, Attenuation: 20 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 20 dB Fixed Attenuator, N Male to N Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 12.4 GHz. PE7048-20 is a fixed 20 dB attenuator from Pasternack. This 20dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7048-20 20 dB attenuator is rated for up to 12.4 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7048-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 8 | ||
| PE3W04820LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Cable Using LMR-240-UF Coax, LF Solder. PE3W04820LF is a BNC male to SMA male cable using LMR-240-UF coax. This Pasternack BNC male to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04820LF BNC male to SMA male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() TE Connectivity | 10142048-20 | TE Connectivity | HTU31D I.C 31D RH/T DIGITAL R400 Humidity Sensor Product Type: RH Temperature Module Supply Voltage (Peak): 5.5 VDC Operating Temperature Range: -40 – 125 °C Accuracy: ±2 %RH Interface Signal Type: Digital RH Temperature Module 5.5 VDC | Htu31 Humidity And Temperature Combination Sensor | Part Number: 10142048-20 | Internal Number: 10142048-20 | TE Connectivity RoHS : Compliant |
| 422 | |
| T1500482000-000 | TE Connectivity | H48B-AG-LB Hood & Base Connector Product Type: Base Housing Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1500482000-000 | Internal Number: T1500482000-000 | TE Connectivity RoHS : Compliant |
| 24 | ||
![]() Venkel Ltd. | CRN10-4-820JT | VENKEL LTD | Chip Resistor Array;CRN10;4;82R;�5%;Convex RoHS : Compliant | 0 | ||
![]() Vyrian | CM8071504820805S RMBA | Intel Corporation | 3,788 | |||
| GWS50048209KLX000 | Vishay Intertechnologies | Resistor, Wire Wound, 82ohm, 3000V, 10% +/-Tol, 100,180ppm/Cel RoHS : Compliant | 856 | |||
| GWS50048200KLX000 | Vishay Intertechnologies | Resistor, Wire Wound, 820ohm, 3000V, 10% +/-Tol, 100,180ppm/Cel RoHS : Compliant | 759 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |