| Electronic Components Datasheet Search |
|
0210200080 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() GLYN GmbH & Co. KG | RUTC50210000 | Teltonika | 5G POWERHOUSE WITH WI-FI 6 | 1 | ||
![]() Powell Electronics | 5021080011 | TE Connectivity | Connectors |
| 1,650 | |
| MTMM-102-10-S-S-320 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 1,419 | ||
| MTSW-102-10-L-S-090-RE | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 1,249 | ||
| MTSW-102-10-T-S-146-RE | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 1,249 | ||
| MTLW-102-10-T-S-430 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 1,162 | ||
| 202101-10 | Amphenol RF | RF Connector |
| 420 | ||
| 54122-402100800LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 330 | ||
| HMTSW-102-10-G-D-600 | Samtec Inc | .100" High-Temp Variable Post Height Ter RoHS : Compliant |
| 279 | ||
| MTSW-102-10-G-S-530-RA | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 275 | ||
| 802-10-032-10-002101 | PRECI-DIP SSA | Straight pin connector 2.54 mm, height 3 RoHS : Compliant |
| 137 | ||
| 590-59AD02-104 | Honeywell Sensing and Control | Switch |
| 65 | ||
| T2050102101-007 | TE Connectivity | Power Connectors RoHS : Compliant |
| 53 | ||
| T1902102232-009 | TE Connectivity | Power Connectors RoHS : Compliant |
| 12 | ||
| 202102-10 | Amphenol RF | N-Type Protective Cap Plug |
| 6 | ||
| 107602-108 | TE Connectivity | DEUTSCH CONNECTOR 107602-108 |
| 1 | ||
![]() PUI | F17102101000 | Vishay Roederstein | RoHS : Compliant | 4,500 | ||
| 6021-0-15-01-16-27-10-0 | Mill-Max Mfg Corp | RoHS : Compliant | 1,000 | |||
| 2012-2X40G00S/021/062/O | 500 | |||||
| 2012-2X10G00S/021/062/O | 117 | |||||
![]() Richardson RFPD | SDT210-210210-1 | SDT Technology (Shanghai ShiDi Technology) | TEE ADAPTER RoHS : Compliant | 0 | ||
| ATS021021006-PF010 | Advanced Thermal Solutions Inc | Heat Sink Passive BGA Pin Array Adhesive Aluminum RoHS : Not Compliant |
| 0 | ||
| ATS021021015-PF013 | Advanced Thermal Solutions Inc | Heat Sink Passive BGA Pin Array Adhesive Aluminum RoHS : Not Compliant |
| 0 | ||
| ATS021021011-PF012 | Advanced Thermal Solutions Inc | Heat Sink Passive BGA Pin Array Adhesive Aluminum RoHS : Compliant |
| 0 | ||
| ATS021021009-PF011 | Advanced Thermal Solutions Inc | Heat Sink Passive BGA Pin Array Adhesive Aluminum RoHS : Compliant |
| 0 | ||
| 131-1402-101 | Cinch Connectivity Solutions | Conn SMB PL 0Hz to 4GHz 50Ohm Crimp RA Cable Mount RoHS : Compliant |
| 0 | ||
| 514CBB002107AAG | Skyworks Solutions Inc | Oscillator XO 48MHz ±50ppm CMOS 52% 3.3V 6-Pin SMD RoHS : Compliant |
| 0 | ||
| ATS-X50210G-C1-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive BGA Angle SMD Aluminum 7.2C/W Bl RoHS : Compliant |
| 0 | ||
| HLC02100KTTR | Kyocera AVX Components | RF CHIP INDUCTOR RoHS : Compliant | 0 | |||
| HLQ02100CTTR | Kyocera AVX Components | RF CHIP INDUCTOR RoHS : Compliant | 0 | |||
| K021003330HM0J143 | Kendeil srl | ALUM ELECTROLYTC CAP RoHS : Compliant | 0 | |||
| 133-3402-106 | Cinch Connectivity Solutions | Conn MCX PL 0Hz to 6GHz 50Ohm Crimp RA Cable Mount RoHS : Compliant |
| 0 | ||
| R222M40210 | Radiall | R222M40210 RoHS : Not Compliant | 0 | |||
| R302255002100 | Radiall | SMA M MML H2.5 1.37/50S 100 RoHS : Compliant | 0 | |||
| 415-0021-006 | Cinch Connectivity Solutions | Cable Assembly Coaxial 0.152m MCX to MCX PL-PL RoHS : Compliant |
| 0 | ||
![]() Rutronik | CRCW040210R0FKEDHP | Vishay Intertechnologies | HP0402 10R 1% 0,2W HIGHPOWER RoHS : Compliant |
| 400,000 | |
| X1E000021002300 | Seiko Epson Corporation | TSX-3225 26,000000M 7pF 10ppm RoHS : Compliant |
| 30,000 | ||
| CRCW040210K0FKEDHP | Vishay Intertechnologies | HP0402 10K 1% 0,2W HIGHPOWER RoHS : Compliant |
| 20,000 | ||
| X1E000021001314 | Seiko Epson Corporation | TSX-3225 16,000000M 9pF 10ppm RoHS : Compliant |
| 20,000 | ||
| X1E000021011900 | Seiko Epson Corporation | TSX-3225 16,000000M 12pF 10ppm RoHS : Compliant |
| 20,000 | ||
| X1E000021004814 | Seiko Epson Corporation | TSX-3225 24,000000M 9pF 10ppm RoHS : Compliant |
| 17,000 | ||
| X1E000021012214 | Seiko Epson Corporation | TSX-3225 24,000000M 9pF 10ppm RoHS : Compliant |
| 13,000 | ||
| CR40-2100-FL | ASJ Holdings Limited | RC1210 210R 1% 0,5W TK100 RoHS : Compliant |
| 10,000 | ||
| X1E000021005214 | Seiko Epson Corporation | TSX-3225 16,000000M 9pF 10ppm RoHS : Compliant |
| 9,000 | ||
| 109159002101916 | Kyocera AVX Components | 02P BTB PLUG WHITE UL APPROVED RoHS : Compliant |
| 8,400 | ||
| X1E000021001914 | Seiko Epson Corporation | TSX-3225 16,000000M 9pF 10ppm RoHS : Compliant |
| 7,000 | ||
| 908140210 | Molex | 10P Picoflex PF-50 Header SMT RoHS : Compliant |
| 1,200 | ||
| 179021.0,5IP | SIBA Fuses | 0.5A 250V fast 5x20 ceramic IEC RoHS : Compliant |
| 1,000 | ||
| 1053002100 | Molex | Nano-Fit Crimp terminal FEMALE MATTE TIN RoHS : Compliant |
| 30 | ||
| 7S.23.9.012.0210 | FINDER SpA | Safteyrelay 12V 2NO/1NC 10/20A RoHS : Compliant |
| 15 | ||
![]() Avnet Silica | 76002103 | Digi International Inc | External Antenna Blade Triple Band 25GHz 27GHz Linear SMA Connector (Alt: 76002103) RoHS : Compliant | 0 | ||
| 2302100-R | Microchip Technology Inc | (Alt: 2302100-R) RoHS : Compliant | 0 | |||
| IW1702-10B | Renesas Electronics Corporation | (Alt: IW1702-10B) RoHS : Compliant | 0 | |||
| 8L30210NLG | Renesas Electronics Corporation | Clock Buffer Fanout 10 MHz to 40 MHz 10 Outputs 3135 V to 3465 V 32 Pins VFQFNEP (Alt: 8L30210NLG) RoHS : Compliant | 0 | |||
| FDBL0210N80 | onsemi | NChannel PowerTrench MOSFET 80V 240A 20mO (Alt: FDBL0210N80) RoHS : Compliant | 0 | |||
| SI302102924 | 2J USA | CELLULARLTE Screw Mount (Alt: SI302102924) RoHS : Compliant | 0 | |||
| P3S0210BQAZ | NXP Semiconductors | Dual Bidirectional I3CBus 12 and 21 Switch and Voltage Level Translator 720 mV to 363 V (Alt: P3S0210BQAZ) RoHS : Compliant | 0 | |||
| IS0-2100AEH-Q | Renesas Electronics Corporation | (Alt: IS0-2100AEH-Q) RoHS : Compliant | 0 | |||
| BM60210FV-CE2 | ROHM Semiconductor | (Alt: BM60210FV-CE2) RoHS : Compliant | 0 | |||
| EMIF02-1003M6 | STMicroelectronics | EMI Filter Flat Style SMD TR (Alt: EMIF02-1003M6) RoHS : Compliant | 0 | |||
| P3S0210BQ-ARD | NXP Semiconductors | P3S0210 Dual Bidirectional I3C Switch and Voltage Level Translator Evaluation Board (Alt: P3S0210BQ-ARD) RoHS : Compliant | 0 | |||
AT17LV002-10JU![]() | Microchip Technology Inc | EEPROM Serial 2Mbit 2M X 1 3V to 55V 20Pin PLCC Tube (Alt: AT17LV002-10JU) RoHS : Compliant | 0 | |||
| PD70210AILD-TR | Microchip Technology Inc | FrontEnd PD Interface Controller 16Pin DFN EP TR (Alt: PD70210AILD-TR) RoHS : Compliant | 0 | |||
| UCLAMP02101ZA.F | Semtech Corporation | ESD Suppressor TVS 30kV 2Pin DFN (Alt: UCLAMP02101ZA.F) RoHS : Compliant | 0 | |||
| A1F2-0591F2A002100 | Lumileds | (Alt: A1F2-0591F2A002100) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | 76002105 | Digi International Inc | One (1) WiFi Antenna for 6350-SR, EX15 and IX20 Dipole, RP SMA plug, 2.4GHz & 5GHz |
| 1 | |
| 76002104 | Digi International Inc | PSU 18VDC 1A Wallmount Level VI, Ind. temp (-40C/+70C), Changeable plugtips for US, UK, EU, AU; 2pin Combicon screw terminal plug. Suitable for IX10 and IX20. Supersedes SKU 24000155 |
| 1 | ||
AIRD-02-100K![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q0402-10NK-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| 76002108 | Digi International Inc | M12 T-code Female connector, 5m, compatible with TX64 Rail |
| 0 | ||
AIAP-02-102K![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| EB_NN02-101-M-BT | Ignion | NANO mXTENDTM BT middle |
| 0 | ||
AIAP-02-103K![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AIMC-0402-10NJ-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AIMC-Q0402-10NG-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ABNTC-0402-103J-3380F-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| 76002103 | Digi International Inc | Qty 1, Antenna,LTE Dipole SMA 1-3dBi 698-960/1710-2170/2500-2700 MHz, BLACK Accessory for IX10 |
| 0 | ||
AIAP-02-101K![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q0402-10NG-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ABNTC-0402-104J-4250F-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | CR0402-10W-9532FT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 7,118 | |
| PMA-8084-2-224WLNSP-TR-02-1-02 | Qualcomm | IN STOCK SHIP TODAY | 6,474 | |||
| 09-3002-1-0310 | Concord Electronics Inc | IN STOCK SHIP TODAY |
| 2,660 | ||
| 2551-4-00-21-00-00-07-0 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY | 876 | |||
| 133-3402-106 | Vertiv Inc | IN STOCK SHIP TODAY |
| 470 | ||
| 8502-002-1000 | Belden Inc | IN STOCK SHIP TODAY |
| 400 | ||
| 131-1402-101 | Johnson Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 100 | ||
| KP1830210014 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 91 | ||
| 105-4202-105 | Johnson Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 33 | ||
| FP000210R0F9251B8 | Vishay Dale | IN STOCK SHIP TODAY |
| 22 | ||
| MKP1J021003C00KSSD | Wima | IN STOCK SHIP TODAY RoHS : Compliant |
| 18 | ||
| SDC0602-101MF | SWS | IN STOCK SHIP TODAY | 10 | |||
| MKS2C021001A00KSSD | Wima | IN STOCK SHIP TODAY RoHS : Compliant |
| 4 | ||
| 16SMB-50-2-10/111 | HUBER+SUHNER | IN STOCK SHIP TODAY |
| 1 | ||
| 83002-002-1000 | Belden Inc | IN STOCK SHIP TODAY |
| 1 | ||
![]() EBV Elektronik | P3S0210BQ-ARD | NXP Semiconductors | P3S0210 Dual Bidirectional I3C Switch and Voltage Level Translator Evaluation Board (Alt: P3S0210BQ-ARD) RoHS : Compliant | 2 | ||
| FDBL0210N80 | onsemi | NChannel PowerTrench MOSFET 80V 240A 20mO (Alt: FDBL0210N80) RoHS : Compliant | 0 | |||
| B50210SB0KMLG | Broadcom Limited | SINGEPORT RSGMII DUAL MEDIA (Alt: B50210SB0KMLG) RoHS : Compliant | 0 | |||
| B50210SB0IMLG | Broadcom Limited | CopperFiber Gigabit Ethernet Transceiver (Alt: B50210SB0IMLG) RoHS : Compliant | 0 | |||
AT17LV002-10JU![]() | Microchip Technology Inc | EEPROM Serial 2Mbit 2M X 1 3V to 55V 20Pin PLCC Tube (Alt: AT17LV002-10JU) RoHS : Compliant | 0 | |||
| PD70210AILD-TR | Microchip Technology Inc | FrontEnd PD Interface Controller 16Pin DFN EP TR (Alt: PD70210AILD-TR) RoHS : Compliant | 0 | |||
MP-3020-2100-57-70![]() | Luminus Devices | LED UniColor White 90lm 5700K Chip LED 2Pin SMD TR (Alt: MP-3020-2100-57-70) RoHS : Compliant | 0 | |||
MP-3020-2100-30-80![]() | Luminus Devices | LED UniColor White 81lm 3000K Chip LED 2Pin SMD TR (Alt: MP-3020-2100-30-80) RoHS : Compliant | 0 | |||
MP-3030-2100-27-90![]() | Luminus Devices | MP30302100 (Alt: MP-3030-2100-27-90) RoHS : Compliant | 0 | |||
MP-3020-2100-27-90![]() | Luminus Devices | LED UniColor White 70lm 2700K Chip LED 2Pin SMD TR (Alt: MP-3020-2100-27-90) RoHS : Compliant | 0 | |||
| MP-3030-210H-22-90 | Luminus Devices | (Alt: MP-3030-210H-22-90) RoHS : Compliant | 0 | |||
| MP-3030-210H-50-80 | Luminus Devices | (Alt: MP-3030-210H-50-80) RoHS : Compliant | 0 | |||
MP-3030-2100-40-80![]() | Luminus Devices | MP30302100 (Alt: MP-3030-2100-40-80) RoHS : Compliant | 0 | |||
MP-3020-2100-50-70![]() | Luminus Devices | LED UniColor White 92lm 5000K Chip LED 2Pin SMD TR (Alt: MP-3020-2100-50-70) RoHS : Compliant | 0 | |||
MP-3020-2100-65-70![]() | Luminus Devices | LED UniColor White 90lm 6500K Chip LED 2Pin SMD TR (Alt: MP-3020-2100-65-70) RoHS : Compliant | 0 | |||
![]() ECCO | 51021-0200 | Molex | RoHS : Compliant |
| 103 | |
| 0510210200 | Molex | RoHS : Compliant |
| 103 | ||
| C10-766102-100 | Amphenol Industrial Operations |
| 100 | |||
| 351-1021-000 | ITT Interconnect Solutions |
| 100 | |||
| 51021-0500 | Molex | RoHS : Compliant |
| 51 | ||
| 0510210500 | Molex | RoHS : Compliant |
| 51 | ||
| 1021003000 | ITT Interconnect Solutions |
| 32 | |||
| 102-1003-000 | ITT Interconnect Solutions |
| 32 | |||
| M22520/2-10 | Astro Tool Corp |
| 24 | |||
| CM111-02-1000-024 | ECCO Connectors |
| 22 | |||
| CM111-02-1000-036 | ECCO Connectors |
| 11 | |||
| CM111-02-1000-048 | ECCO Connectors |
| 11 | |||
| M8372360210AR | Amphenol PCD |
| 3 | |||
| 1021013000 | ITT Interconnect Solutions |
| 3 | |||
| 102-1006-000 | ITT Interconnect Solutions |
| 2 | |||
![]() Flip Electronics | NSR02100HT1G | onsemi | Stock, Ship Today RoHS : Compliant | 270,500 | ||
| B50210EB1KMLG | Broadcom Limited | Stock, Ship Today |
| 1,238 | ||
| B50210B0IMLG | Broadcom Limited | Stock, Ship Today |
| 1,184 | ||
| FDBL0210N80 | onsemi | Stock, Ship Today RoHS : Compliant | 1,101 | |||
| CDB260W-1700-210-R | Energy Recovery Products | Stock, Ship Today |
| 225 | ||
| PMB260W-1700-210 | Energy Recovery Products | Stock, Ship Today |
| 213 | ||
![]() Maritex | RCA02100KJLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA02100KJLF; HKR |
| 904,040 | |
| RCA02100RFLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA02100RFLF; HKR |
| 800,000 | ||
| RCA0210RJLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA0210RJLF; HKR |
| 780,000 | ||
| RCA0210MJLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA0210MJLF; HKR |
| 150,000 | ||
| RCA0210K5FLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA0210K5FLF; HKR |
| 29,400 | ||
| WL-USB021-002 | WELINK Technology Co Ltd | Micro USB receptacle; type B; 5-contacts;USB 2.0; gold plating contacts; SMD+DIP mounting |
| 5,903 | ||
| ZIFNZ0210ET-TR | CONNTHERM | ZIF connector for FFC/FPC; pitch 0.50mm; 10-contacts; SMD; side entry; downside contacts |
| 4,958 | ||
| RCA02100RJLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA02100RJLF; HKR |
| 3,300 | ||
TPL0102-100PWR![]() | Texas Instruments | Digital Potentiometers; TPL0102-100PWR; TEXAS INSTRUMENTS; 100 k?; 20 %; 5.5 V; 200 �A RoHS : Compliant |
| 2,043 | ||
| RCA0210RFLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA0210RFLF; HKR |
| 824 | ||
| CRCW0402100KFKED | Vishay Intertechnologies | Resistor; thick film; SMD; 0402; 100kOhm; 1%; 63mW; -55+155 deg.C RoHS : Compliant |
| 770 | ||
| FKP1R021005D00JSSD | Wima | Polyester capacitor;10nF; 1250V; 5%; p=22.5mm; 7x16x26.5 mm; -55+100deg.C RoHS : Compliant |
| 757 | ||
| CRCW040210K0FKTDBC | Vishay Intertechnologies | Resistor; thick film; SMD; 0402; 10kOhm; 1%; 63mW; -55+155 deg.C RoHS : Compliant |
| 220 | ||
TPS40210DGQR![]() | Texas Instruments | DC DC Converters; TPS40210DGQR; TEXAS INSTRUMENTS; 10; Boost, Flyback, SEPIC; 1.1 mm; 1 RoHS : Compliant |
| 99 | ||
| 9D.01.5.175.0210 | FINDER SpA | Din rail terminal block; distribution block; single-pole; 2x70mm2/ 10x16mm2; 1000 VAC/1500 VDC; 175A |
| 5 | ||
![]() Pasternack Enterprises US | TC-402-1023M-LP | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: 1.0/2.3, Connector Gender: Plug, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TFT-402, Interface Type 2: TFT-402-LF. 1.0/2.3 Plug Low PIM Connector Solder Attachment for TFT-402, TFT-402-LF. TC-402-1023M-LP 1.0/2.3 plug coaxial connector has an interface type of TFT-402, TFT-402-LF and a 50 Ohm impedance. Pasternack 1.0/2.3 plug connector uses shield/contact solder/solder as an attachment method. Our plug 1.0/2.3 coaxial connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack 1.0/2.3 plug coaxial connector has a PTFE dielectric type and a VSWR of 1.3. The Pasternack 1.0/2.3 coaxial connector has a brass body with tri-metal plating. Our TC-402-1023M-LP 1.0/2.3 connector uses brass contact. This 1.0/2.3 plug coaxial RF connector is RoHS and REACH compliant. This Pasternack plug 1.0/2.3 connector will ship the same day as purchased. Our 1.0/2.3 plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 1.0/2.3 connector cable assemblies that will ship the same day as well. |
| 138 | |
| PE3FCA002-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex LC UPC to LC UPC, MM OM1, 2.0mm Riser cable, Orange - 10 meter. Pasternack’s PE3FCA002-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long patch cable assembly is equipped with simplex LC/UPC to LC/UPC connectors. Our orange fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a multimode OM1 fiber that offers stable, high-speed transmission over short distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA002-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements. |
| 85 | ||
| PE3FCA402-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to SC UPC, OM1 Multimode Distribution Cable, 6.2mm LSZH, 2.0mm breakout, Orange-10M. Pasternack’s PE3FCA402-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 12-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our orange fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA402-10M fiber optic cable with a 6.2 mm cable diameter and 62 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements. |
| 56 | ||
| PE3W02100LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to BNC Female Bulkhead Cable Using RG178 Coax with HeatShrink, RoHS. PE3W02100LF/HS is a SMP female right angle to BNC female bulkhead cable using RG178 coax. This Pasternack SMP female right angle to BNC female bulkhead cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm BNC for connector 2. SMP right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02100LF/HS SMP female right angle to BNC female bulkhead cable assembly is constructed with RG178 coax. | 53 | |||
| PE3TC1202-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: PE-SF200LL75, RF Cable Type: PE-SF200LL75, RF Cable Impedance: 75 Ohm, Length: 39.37 inches. 75 Ohm F Male to 75 Ohm F Male Low Frequency Cable 100 cm Length Using 75 Ohm PE-SF200LL75 Coax, RoHS., Radio frequency assembly 75 Ohm F male to 75 Ohm F male low frequency cable 100 cm length using 75 Ohm PE-SF200LL75 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 75 Ohm F male to 75 Ohm F male low frequency cable 100 cm length using 75 Ohm PE-SF200LL75 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to F type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type F cable connection on one end and type F cable connection on the other. Our low loss type F to F type cable assemblies have a male gender on end 1 and male on end 2. This type F to type F cable is a male to male coax assembly, PE3TC1202-100CM, can also be known as a low loss F type plug to type F plug cable assembly and will be shipped same-day as it is purchased. Type F plug to F type plug cable assembly PE3TC1202-100CM is built with PE-SF200LL75 which is a flexible coax type. The Pasternack flexible F cable assembly is manufactured with F type to type F cable connectors, has a 75 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency type F male to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type F plug to F type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to type F cable assembly for quick shipment worldwide. Variations of type F cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm F male to 75 Ohm F male low frequency cable 100 cm length using 75 Ohm PE-SF200LL75 coax, RoHS. |
| 19 | ||
| PE3C7602-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMB Plug to SSMA Male Cable 100 cm Length Using RG178 Coax., Radio frequency assembly SMB plug to SSMA male cable 100 cm length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to SSMA male cable 100 cm length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and SSMA cable connection on the other. Our SMB to SSMA cable assemblies have a plug gender on end 1 and male on end 2. This SMB to SSMA cable is a plug to male coax assembly, PE3C7602-100CM, can also be known as a SMB male to SSMA plug cable assembly and will be shipped same-day as it is purchased. SMB male to SSMA plug cable assembly PE3C7602-100CM is built with RG178 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMB plug to SSMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7602-100CM can also be used in the other direction and will be SSMA male to SMB plug cable assembly if the opposite connectivity is required. SMB male to SSMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SSMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SSMA male cable 100 cm length using RG178 coax. |
| 7 | ||
| PE3W02100LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMP Female Right Angle to BNC Female Bulkhead Cable 24 Inch Length Using RG178 Coax with HeatShrink, LF Solder., Radio frequency assembly SMP female right angle to BNC female bulkhead cable 24 inch length using RG178 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female right angle to BNC female bulkhead cable 24 inch length using RG178 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and BNC bulkhead cable connection on the other. Our right angle SMP to BNC cable assemblies have a female gender on end 1 and female on end 2. This SMP to BNC cable is a female to female coax assembly, PE3W02100LF/HS-24, can also be known as a right angle SMP jack to BNC jack cable assembly and will be shipped same-day as it is purchased. SMP jack to BNC jack cable assembly PE3W02100LF/HS-24 is built with RG178 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMP right angle female to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02100LF/HS-24 can also be used in the other direction and will be BNC female bulkhead to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to BNC cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to BNC female bulkhead cable 24 inch length using RG178 coax with heatshrink, LF solder. |
| 6 | ||
| PE3W02100LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMP Female Right Angle to BNC Female Bulkhead Cable 48 Inch Length Using RG178 Coax with HeatShrink, LF Solder., Radio frequency assembly SMP female right angle to BNC female bulkhead cable 48 inch length using RG178 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female right angle to BNC female bulkhead cable 48 inch length using RG178 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and BNC bulkhead cable connection on the other. Our right angle SMP to BNC cable assemblies have a female gender on end 1 and female on end 2. This SMP to BNC cable is a female to female coax assembly, PE3W02100LF/HS-48, can also be known as a right angle SMP jack to BNC jack cable assembly and will be shipped same-day as it is purchased. SMP jack to BNC jack cable assembly PE3W02100LF/HS-48 is built with RG178 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMP right angle female to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02100LF/HS-48 can also be used in the other direction and will be BNC female bulkhead to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to BNC cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to BNC female bulkhead cable 48 inch length using RG178 coax with heatshrink, LF solder. |
| 6 | ||
| PE7702-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 10 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 1 Watts, Body Material: Copper, Connector-In Series: 2.92mm, Connector-In Gender: Female, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -269.15 deg C. 10 dB Fixed Attenuator Bulkhead for Cryogenic Application, 2.92mm Female to 2.92mm Female Copper Gold Plated Body Rated to 1 W, DC to 18 GHz. PE7702-10 is a 10 dB fixed attenuator from Pasternack that is designed for cryogenic applications. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. This RF attenuator comes with a maximum attenuation accuracy of 0.75 dB. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 1 Watt. This attenuator has a maximum VSWR of 1.35:1 and operates between 4 kelvin and 125 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with copper body material and gold plating. The bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a female gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7702-10 attenuator is rated for up to 18 GHz. This fixed coaxial attenuator is suitable for quantum computing, precision measurements, instrumentation and prototyping and characterization applications. Our attenuator can work and maintain excellent RF performance at the low temperature of 4 kelvin. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7702-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 4 | ||
| PEWRD650CP02-10 | Pasternack Enterprises | Key Specifications, Waveguide Size : WRD-650, Flange Type : Cover Flange, Flange Group : Standard, Minimum Frequency: 6.5 GHz, Maximum Frequency: 18 GHz, Impedance : 50 Ohms, Maximum VSWR: 1.5:1, Maximum Insertion Loss: 0.8 dB, Coupling: 10 dB. WRD-650 Double Ridge Waveguide 10 dB Broadwall Coupler, N Female Coupled Port, 6.5 GHz to 18 GHz, Brass., Pasternack’s PEWRD650CP02-10 is a WRD-650 directional broadwall waveguide coupler with a 50 Ohm impedance. This directional waveguide coupler has an type N connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 6.5 GHz and 18 GHz. The PEWRD650CP02-10 WRD-650 waveguide coupler is a great option for test benches, radar, satellite, microwave radio, attenuation measurements, power measurements and source leveling applications. This waveguide broadwall coupler is designed with an coupled port and has a coupling accuracy of 10 dB. The PEWRD650CP02-10 broadwall waveguide coupler from Pasternack is designed with a coupling value of 10 dB and 2 dB coupling flatness. This 10 dB waveguide coupler has a brass body with gray plating. Our WRD-650 directional waveguide coupler is rated for a maximum input power (CW) of 200 Watts. This 18 GHz waveguide coupler has a 1.25:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this WRD-650 waveguide coupler are on our downloadable PDF datasheet above. This directional waveguide coupler has 3,000 Watts of peak power along with a directivity of 30 dB. The PEWRD650CP02-10 broadwall waveguide coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our 200 Watts (CW) waveguide coupler has a maximum insertion loss of 0.8 dB. This WRD-650 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal directional broadwall waveguide coupler for your requirement. |
| 2 | ||
| PE2CP002-10 | Pasternack Enterprises | Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Minimum Frequency: 700 MHz, Maximum Frequency: 2.7 GHz, Maximum Input Power: 50 Watt, Coupling Value: 10 dB. Directional 10 dB SMA Coupler From 700 MHz to 2.7 GHz Rated to 50 Watts. RF coupler part number PE2CP002-10 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 700 MHz and a maximum frequency of 2.7 GHz. Directional coupler part # PE2CP002-10 is constructed with a coupling value of 10 dB and a coupler directivity of 20 dB. This female SMA directional coupler is built with a maximum insertion loss of 0 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0 dB and a maximum VSWR of 1.2. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP002-10 directional 10 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 1 | ||
| PE3W00210 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using LMR-400 Coax. PE3W00210 is a N male to N male right angle cable using LMR-400 coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00210 N male to N male right angle cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W02100/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to BNC Female Bulkhead Cable Using RG178 Coax with HeatShrink. PE3W02100/HS is a SMP female right angle to BNC female bulkhead cable using RG178 coax. This Pasternack SMP female right angle to BNC female bulkhead cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm BNC for connector 2. SMP right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02100/HS SMP female right angle to BNC female bulkhead cable assembly is constructed with RG178 coax. | 0 | |||
| PE33702-108 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to HN Male Cable 108 Inch Length Using RG214 Coax., Radio frequency assembly 7/16 DIN male to HN male cable 108 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to HN male cable 108 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 7/16 DIN cable connection on one end and a HN cable connection on the other. Our 7/16 DIN to HN cable assembly has a male gender on end 1 and a male on end 2. PE33702-108 can also be known as a 7/16 DIN plug to HN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE33702-108 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -20 to 80 degrees C. The flexible RF cable has a between series connection. Our 7/16 DIN male to HN male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to HN plug cable assembly PE33702-108 is built with RG214 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to HN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE33702-108 can also be used in the other direction and will be a HN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to HN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to HN cable assembly for quick shipment worldwide. Variations of 7/16 DIN and HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to HN RF cable assembly as per your requirements. |
| 0 | ||
| PE3W02100 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to SMP Female Right Angle Cable Using RG178 Coax. PE3W02100 is a BNC female bulkhead to SMP female right angle cable using RG178 coax. This Pasternack BNC female bulkhead to SMP female right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMP for connector 2. BNC to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female BNC bulkhead to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02100 BNC female bulkhead to SMP female right angle cable assembly is constructed with RG178 coax. | 0 | |||
![]() Teledyne HiRel | M38510/21002BJA![]() | Teledyne HiRel | PROM, 2K X 8, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | ||
M38510/21002B3A![]() | Teledyne HiRel | PROM, 2K X 8, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
M38510/21002BLA![]() | Teledyne HiRel | PROM, 2K X 8, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| M38510/21002BKA | Teledyne HiRel | PROM, 2K X 8, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | CR0402-10W-1004FT | VENKEL LTD | Chip Resistor;0402;1/10W;1M;�1% RoHS : Compliant | 3,150,000 | ||
| CR0402-10W-1743FT | VENKEL LTD | Chip Resistor;0402;1/10W;174K ;�1% RoHS : Compliant | 20,000 | |||
| C1206C0G202-100JNP | VENKEL LTD | HV Chip Capacitor;1206;C0G;2000V;10pF;�5% RoHS : Compliant | 0 | |||
C1210C0G102-102KNE![]() | VENKEL LTD | HV Chip Capacitor;1210;C0G;1000V;1000pF;�10% RoHS : Compliant | 0 | |||
| C1808C0G302-102JNE | VENKEL LTD | HV Chip Capacitor;1808;C0G;3000V;1000pF;�5% RoHS : Compliant | 0 | |||
| C2225X7R102-104MNE | VENKEL LTD | HV Chip Capacitor;2225;X7R;1000V;0.1uF;�20% RoHS : Compliant | 0 | |||
| CR0402-10W-102JT | VENKEL LTD | Chip Resistor;0402;1/10W;1K;�5% RoHS : Compliant | 0 | |||
| CR0402-10W-10R0FT | VENKEL LTD | Chip Resistor;0402;1/10W;10R;�1% RoHS : Compliant | 0 | |||
| CR0402-10W-1130FT | VENKEL LTD | Chip Resistor;0402;1/10W;113R;�1% RoHS : Compliant | 0 | |||
| CR0402-10W-1211FT | VENKEL LTD | Chip Resistor;0402;1/10W;1.21K;�1% RoHS : Compliant | 0 | |||
| CR0402-10W-1374FT | VENKEL LTD | Chip Resistor;0402;1/10W;1.37M;�1% RoHS : Compliant | 0 | |||
| CR0402-10W-1581FT | VENKEL LTD | Chip Resistor;0402;1/10W;1.58K;�1% RoHS : Compliant | 0 | |||
| CR0402-10W-1824FT | VENKEL LTD | Chip Resistor;0402;1/10W;1.82M;�1% RoHS : Compliant | 0 | |||
| CR0402-10W-184JT | VENKEL LTD | Chip Resistor;0402;1/10W;180K;�5% RoHS : Compliant | 0 | |||
| CR0402-10W-19R1FT | VENKEL LTD | Chip Resistor;0402;1/10W;19.1R;�1% RoHS : Compliant | 0 | |||
![]() Waytek, Inc. | 54200210 | Aptiv PLC | Apex 2.8, 2 Way Sealed Male Assembly |
| 1,749 | |
| 320-402-10 | MP | Short Stop Circuit Breaker Copper Bus Bar, 10 Position |
| 1,171 | ||
| 55021-07 | Cole Hersee | Cole Hersee 55021-07 PVC-coated heavy-duty metal toggle switch is an SPDT (On)-Off-(On) momentary switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It features three 8" wire leads, an O-ring-sealed stem, and PVC-coated housing. |
| 300 | ||
![]() Wuhan P&S | CRCW040210R5FKED | Vishay Intertechnologies | Standard Thick Film Chip Resistors, RoHS : Compliant |
| 10,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |